Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 31Jan2013]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub on this drive.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system:
Boot sector type: Unknown
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 617,170,943 617,168,896 83 Linux
/dev/sda2 617,170,944 625,139,713 7,968,770 5 Extended
/dev/sda5 617,170,946 625,139,713 7,968,768 82 Linux swap / Solaris
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 78f184fe-c398-4f35-802c-f6342e6528b6 ext4 System
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,errors=remount-ro)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 78f184fe-c398-4f35-802c-f6342e6528b6
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 78f184fe-c398-4f35-802c-f6342e6528b6
set locale_dir=($root)/boot/grub/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, avec Linux 3.2.0-38-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 78f184fe-c398-4f35-802c-f6342e6528b6
linux /boot/vmlinuz-3.2.0-38-generic root=UUID=78f184fe-c398-4f35-802c-f6342e6528b6 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-38-generic
}
menuentry 'Ubuntu, avec Linux 3.2.0-38-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 78f184fe-c398-4f35-802c-f6342e6528b6
echo 'Chargement de Linux 3.2.0-38-generic ...'
linux /boot/vmlinuz-3.2.0-38-generic root=UUID=78f184fe-c398-4f35-802c-f6342e6528b6 ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.2.0-38-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, avec Linux 3.2.0-37-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 78f184fe-c398-4f35-802c-f6342e6528b6
linux /boot/vmlinuz-3.2.0-37-generic root=UUID=78f184fe-c398-4f35-802c-f6342e6528b6 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-37-generic
}
menuentry 'Ubuntu, avec Linux 3.2.0-37-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 78f184fe-c398-4f35-802c-f6342e6528b6
echo 'Chargement de Linux 3.2.0-37-generic ...'
linux /boot/vmlinuz-3.2.0-37-generic root=UUID=78f184fe-c398-4f35-802c-f6342e6528b6 ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.2.0-37-generic
}
menuentry 'Ubuntu, avec Linux 3.2.0-33-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 78f184fe-c398-4f35-802c-f6342e6528b6
linux /boot/vmlinuz-3.2.0-33-generic root=UUID=78f184fe-c398-4f35-802c-f6342e6528b6 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-33-generic
}
menuentry 'Ubuntu, avec Linux 3.2.0-33-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 78f184fe-c398-4f35-802c-f6342e6528b6
echo 'Chargement de Linux 3.2.0-33-generic ...'
linux /boot/vmlinuz-3.2.0-33-generic root=UUID=78f184fe-c398-4f35-802c-f6342e6528b6 ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.2.0-33-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 78f184fe-c398-4f35-802c-f6342e6528b6
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 78f184fe-c398-4f35-802c-f6342e6528b6
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=78f184fe-c398-4f35-802c-f6342e6528b6 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=da6fb770-65f8-468d-862f-9f00535fd230 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
230.131561279 = 247.101882368 boot/grub/grub.cfg 1
120.145587921 = 129.005342720 boot/grub/core.img 1
120.126003265 = 128.984313856 boot/grub/i386-pc/core.img 1
0.759510040 = 0.815517696 boot/vmlinuz-3.2.0-33-generic 1
52.349357605 = 56.209694720 boot/vmlinuz-3.2.0-37-generic 1
186.927482605 = 200.711856128 boot/vmlinuz-3.2.0-38-generic 1
186.927482605 = 200.711856128 vmlinuz 1
52.349357605 = 56.209694720 vmlinuz.old 1
1.140930176 = 1.225064448 boot/initrd.img-3.2.0-33-generic 2
53.007789612 = 56.916680704 boot/initrd.img-3.2.0-37-generic 2
55.131378174 = 59.196866560 boot/initrd.img-3.2.0-38-generic 2
55.131378174 = 59.196866560 initrd.img 2
53.007789612 = 56.916680704 initrd.img.old 2
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda2
00000000 e8 97 d1 c3 e8 97 d1 c3 e8 97 d1 c3 e8 97 d1 c3 |................|
*
000001b0 e8 97 d1 c3 e8 97 d1 c3 e8 97 d1 c3 e8 97 00 fe |................|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 98 79 00 00 00 |............y...|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
Unknown BootLoader on sda5
00000000 e8 97 d1 c3 e8 97 d1 c3 e8 97 d1 c3 e8 97 d1 c3 |................|
*
00000200
ADDITIONAL INFORMATION :
=================== log of boot-repair 2013-03-16__15h00 ===================
boot-repair version : 3.197~ppa35~precise
boot-sav version : 3.197~ppa35~precise
glade2script version : 3.2.2~ppa45~precise
boot-sav-extra version : 3.197~ppa35~precise
boot-repair is executed in installed-session (Ubuntu 12.04.1 LTS, precise, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.2.0-38-generic root=UUID=78f184fe-c398-4f35-802c-f6342e6528b6 ro quiet splash vt.handoff=7
=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 12.04.1 LTS CurrentSession:linux
=================== blkid:
/dev/sda1: LABEL="System" UUID="78f184fe-c398-4f35-802c-f6342e6528b6" TYPE="ext4"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Avertissement : la partition étendue ne débute pas sur une frontière de
cylindres. DOS et Linux interpréteront les contenus différemment.
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 oct. 16 10:22 grub.d
total 56
-rwxr-xr-x 1 root root 6743 sept. 12 2012 00_header
-rwxr-xr-x 1 root root 5522 oct. 1 2011 05_debian_theme
-rwxr-xr-x 1 root root 7407 mai 17 2012 10_linux
-rwxr-xr-x 1 root root 6335 mai 17 2012 20_linux_xen
-rwxr-xr-x 1 root root 1588 mai 3 2011 20_memtest86+
-rwxr-xr-x 1 root root 7603 mai 17 2012 30_os-prober
-rwxr-xr-x 1 root root 214 oct. 1 2011 40_custom
-rwxr-xr-x 1 root root 95 oct. 1 2011 41_custom
-rw-r--r-- 1 root root 483 oct. 1 2011 README
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
EFI in dmesg.
[ 0.000000] ACPI: UEFI 0000000079fe6000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI 0000000079fe5000 0003E (v01 FUJ PC 010A0000 FUJ 00000001)
[ 0.000000] ACPI: UEFI 0000000079fe4000 002A6 (v01 FUJ PC 010A0000 FUJ 00000001)
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, .
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA TOSHIBA MK3276GS (scsi)
Disk /dev/sda: 320GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 316GB 316GB primary ext4 boot
2 316GB 320GB 4080MB extended
5 316GB 320GB 4080MB logical
=================== parted -lm:
BYT;
/dev/sda:320GB:scsi:512:512:msdos:ATA TOSHIBA MK3276GS;
1:1049kB:316GB:316GB:ext4::boot;
2:316GB:320GB:4080MB:::;
5:316GB:320GB:4080MB:::;
=================== mount:
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/ordipass/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ordipass)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): agpgart autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usbmon0 usbmon1 usbmon2 v4l vga_arbiter video0 zero
ls /dev/mapper: control
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda1 ext4 290G 5.9G 270G 3% /
udev devtmpfs 887M 12K 887M 1% /dev
tmpfs tmpfs 359M 884K 358M 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 896M 340K 895M 1% /run/shm
=================== fdisk -l:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000bbc0f
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 617170943 308584448 83 Linux
/dev/sda2 617170944 625139713 3984385 5 Extended
/dev/sda5 617170946 625139713 3984384 82 Linux swap / Solaris
=================== Final advice in case of recommended repair
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 12.04.1 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Réparateur de démarrage]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== Default settings
Recommended-Repair
This setting would reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.
Aucun changement n'a été effectué sur cet ordinateur.
On y voit que ta partition sda1 est peu occupée (3% de 290 Go) :
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda1 ext4 290G 5.9G 270G 3% /
Je pense que tu devrais pouvoir en réduire la taille avec Gparted pour libérer entre 50 Go (min) et 100 Go (nominal pour Win8 à mon avis) et créer une partition primaire en NTFS dans la place libérée pour y installer Windows 8 (voir nota). Comme je crains que l'installateur de Windows 8 te fasse du dégât, je te recommande dès maintenant de sauvegarder sur disque dur externe les données précieuses que tu peux avoir sur ce disque dur.
nota : à l'installation, tu imposeras à l'installateur d'installer Windows 8 dans la partition NTFS : il s'installera dans cette unique partition sans se faire prier (c'est ça ou rien) et il ne créera pas ses partitions annexe à la gomme qui ne servent à rien.
