Ce site est optimisé pour être consulté depuis un navigateur moderne dans lequel JavaScript est activé.

Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

ArchangeGabriel

CUDA 32 bits je ne sais pas, je ne connais pas les différences avec la 64. Sinon il y a des infos intéressantes ici : http://askubuntu.com/questions/131506/how-can-i-get-nvidia-cuda-or-opencl-working-on-a-laptop-with-nvidia-discrete-car.

Pour le nouveau pilote nvidia, attention, la configuration est particulière, et c'est pas de la gestion d'Optimus : cela passe tout sur la carte nVidia, et utilise PRIME pour accéder aux sorties vidéos de la carte Intel (cela a été implémenté dans PRIME pour que la carte Intel ai accès à la sortie HDMI de la carte NVIDIA). Donc aucune gestion d'énergie. C'est utile pour un portable utilisé comme desktop.

GP974

bonjour voila bumblebee et primus ne fonctionne plus sur mon pc portable(signature) avec une install fraiche de raring
voici l'erreur

optirun -vv glxspheres 
[ 4773.142275] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 4773.142768] [DEBUG]optirun version 3.1 starting...
[ 4773.142776] [DEBUG]Active configuration:
[ 4773.142779] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 4773.142782] [DEBUG] X display: :8
[ 4773.142797] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-304:/usr/lib32/nvidia-304
[ 4773.142802] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 4773.142806] [DEBUG] Accel/display bridge: primus
[ 4773.142811] [DEBUG] VGL Compression: proxy
[ 4773.754112] [INFO]Response: No - error: [XORG] (EE) No devices detected.

[ 4773.754155] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected.

[ 4773.754175] [DEBUG]Socket closed.
[ 4773.754216] [ERROR]Aborting because fallback start is disabled.
[ 4773.754222] [DEBUG]Killing all remaining processes.

la même version marche impeccablement sur ce même pc sous ubuntu 12.04.2 et anciennement sur 12.10

j'ai eu du mal a retrouver le post n'est il pas possible de l’épingler comme l'ancien ?

ArchangeGabriel

C'est un bug de X.org, il faut ajouter le BusID dans les fichiers xorg.conf de Bumblebee. CF. l'issue correspondante sur le tracker.

Sinon, j'ai déjà demandé 2 fois à ce que ce poste soit épinglé, sans succès (absence de réponse).

lylambda

Sinon, j'ai déjà demandé 2 fois à ce que ce poste soit épinglé, sans succès (absence de réponse).

J'ai fait un signalement aux modérateurs dans ce but. Si on en fait suffisamment, les modo verront forcement ta demande et ce sera vite fait 🙂.

GP974

ok merci 🙂
je suppose que tu parle de cette issue
j'ai donc rajouter BusID "PCI:01:00:0" dans /etc/bumblebee/xorg.conf.nvidia
aucun problème optirun fonctionne a présent

par contre j'ai trouver 2 fichier xorg.conf pour bumblebee
a quoi sert le 2 ieme ? doi-je faire aussi la modif dans celui ci ?

locate bumblebee | grep xorg.conf.nvidia
/etc/bumblebee/xorg.conf.nvidia
/usr/share/bumblebee/default-conf/xorg.conf.nvidia

vus que c'est a faire sur toute les prochaines install de bumblebee sur 13.04 il aura t'il un patch de prévus avant la sortie de 13.04 ?

le poste est épingler il suffisait de demander une 3 ieme fois :lol:

ArchangeGabriel

@lylambda: Merci.

@GP974: Ouaip c'est ça. Le deuxième c'est une fonction de dpkg, qui garde de côté la version originale du fichier telle qu'elle était dans le paquet, comme ça tu peux réinitialiser facilement. Donc non, ne pas modifier l'autre.

Pour ce qu'on va faire, on ne sait pas encore, je suis d'accord avec toi que j'aimerais avoir une solution avant la sortie de la 13.04, qui a lieu jeudi prochain. Au pire ce sera un bête patch pour ajouter le BusID. Sinon, il y a un espoir minime que ce soit corrigé dans X.org.

ZeX

Bonjour, j'avais posté il y a un moment et j'avais laissé le problème de côté, mais aujourd'hui j'ai besoin d'avoir mon Debian qui puisse faire tourner une application que je développe avec des graphismes 2d...
J'ai installé Bumblebee en suivant les étapes du wiki (avec bbswitch et optirun), seulement quand je veux lancer une application via optirun, par exemple optirun glxgears, j'obtiens le message d'erreur suivant :

[ 2411.400382] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)

[ 2411.400456] [ERROR]Aborting because fallback start is disabled.

Merci d'avance 🙂

ArchangeGabriel

Les paquets Debian officieux ne sont pas très à jour, par contre les paquets officiels seront dans experimental d'ici peu de temps, surveille leur arrivée, et tu devrais pour les installer sur ton système, à moins d'être en old-stable...

Sinon "Bumblebee 3.2 is on the Launchpad", avec une nouvelle version de primus également, mais on a un bug étrange sur ma machine de test, on attend d'en savoir plus avant de lancer le tout. Si certains veulent tester, c'est sur le ppa testing.

ArchangeGabriel

Version 3.2 en ligne, à vos updates. (Le bug n'est pas corrigé mais semble être lié à ma machine, puisqu'elle ne marche pas non plus avec l'ancienne version depuis que j'ai réinstallé Ubuntu)

cdjklm

salut pendant la mise à jour elle a voulu changé 3 fichier de configurations et maintenant me retrouve avec ceci

cdjklm@cdjklm-N55SF:~$ optirun glxspheres
[ 734.091609] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "nv" (module does not exist, 0)

[ 734.091648] [ERROR]Aborting because fallback start is disabled.

une idée? merci

ArchangeGabriel

Euh que le bug rencontré devient plus gênant que prévu ?

Tu peux fournir la sortie de optirun -vv glxinfo, le fichier Xorg.8.log complet, ainsi que le contenu des fichiers /etc/bumblebee/[xorg.conf.nvidia,bumblebee.conf] et /etc/bumblebee/xorg.conf.d/busid.conf ?

DarthAngel

apres le remplacement des 3 fichiers de configuration j'ai aussi un soucis:

[  975.839221] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Screen 0 deleted because of no matching config section.

[  975.839325] [ERROR]Aborting because fallback start is disabled.

J'ai purgé les paquets de bumblebee et reinstaller mais ça ne change rien.
PS: Je suis sous raring mais bon à quelques jours de la sortie ce ne devrait pas être un soucis je pense.

GP974

bonjour chez moi avec le nouvelle version ca ne marche plus du tous

idem il ma demander de modifier 3 fichier de config
optirun glxspheres

[  218.289632] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[  218.289969] [DEBUG]optirun version 3.2 starting...
[  218.289977] [DEBUG]Active configuration:
[  218.289980] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[  218.289984] [DEBUG] X display: :8
[  218.289987] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-304:/usr/lib32/nvidia-304
[  218.289990] [DEBUG] Socket path: /var/run/bumblebee.socket
[  218.289993] [DEBUG] Accel/display bridge: primus
[  218.289996] [DEBUG] VGL Compression: proxy
[  218.289999] [DEBUG] VGLrun extra options: 
[  218.290002] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[  219.636089] [INFO]Response: Yes. X is active.

[  219.636113] [INFO]Running application using primus.
[  219.636244] [DEBUG]Process glxspheres started, PID 10666.
Polygons in scene: 62464
Visual ID of window: 0x20
Xlib:  extension "GLX" missing on display ":8".
[  219.819123] [DEBUG]SIGCHILD received, but wait failed with No child processes
[  219.819148] [DEBUG]Socket closed.
[  219.819163] [DEBUG]Killing all remaining processes.

cat /etc/bumblebee/xorg.conf.nvidia

Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
EndSection

Section "Device"
    Identifier  "Device1"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | grep VGA` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device).
#   BusID "PCI:02:00:0"

 BusID "PCI:01:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
    Option "ConnectedMonitor" "DFP"
EndSection

cat /etc/bumblebee/bumblebee.conf


# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-current
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

cat /etc/bumblebee/xorg.conf.d/busid.conf

Section "Device"
    Identifier  "DiscreteNvidia"
#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
    BusID "PCI:01:00:0"
EndSection

Avec le bug l'ecran deviebs noir pour recuperer l'affichage je dois passer en console avec ctrl + alf + f1
puis revenir sur l'interface graphique

ArchangeGabriel

@GP974: Tu peux supprimer ton fichier xorg.conf.nvidia et faire un apt-get install --reinstall bumblebee ?

Les autres, j'ai besoin des logs demandés.

DarthAngel

optirun glxspheres

[  628.241927] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[  628.242661] [INFO]Configured driver: nvidia
[  628.242927] [DEBUG]optirun version 3.2 starting...
[  628.242962] [DEBUG]Active configuration:
[  628.242980] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[  628.243001] [DEBUG] X display: :8
[  628.243012] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-304:/usr/lib32/nvidia-304
[  628.243022] [DEBUG] Socket path: /var/run/bumblebee.socket
[  628.243032] [DEBUG] Accel/display bridge: auto
[  628.243042] [DEBUG] VGL Compression: proxy
[  628.243051] [DEBUG] VGLrun extra options: 
[  628.243060] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[  628.243091] [DEBUG]Using auto-detected bridge primus
[  628.442977] [INFO]Response: No - error: [XORG] (EE) Screen 0 deleted because of no matching config section.

[  628.443034] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Screen 0 deleted because of no matching config section.

[  628.443057] [DEBUG]Socket closed.
[  628.443104] [ERROR]Aborting because fallback start is disabled.
[  628.443118] [DEBUG]Killing all remaining processes.

cat /etc/bumblebee/xorg.conf.nvidia

Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"
EndSection

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"
    BusID "PCI:01:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
EndSection

cat /etc/bumblebee/bumblebee.conf

# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-current
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

cat /etc/bumblebee/xorg.conf.d/busid.conf

Section "Device"
    Identifier  "DiscreteNvidia"
#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
    BusID "PCI:01:00:0"
EndSection

cat /var/log/Xorg.8.log

[  1826.609] 
X.Org X Server 1.13.3
Release Date: 2013-03-07
[  1826.609] X Protocol Version 11, Revision 0
[  1826.609] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[  1826.609] Current Operating System: Linux GABUZOMEU 3.8.0-19-generic #29-Ubuntu SMP Wed Apr 17 18:16:28 UTC 2013 x86_64
[  1826.609] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=dbf61de5-f0f9-4822-8f4a-200ab1a64084 ro quiet splash acpi_osi=Linux acpi_backlight=vendor
[  1826.610] Build Date: 17 April 2013  10:43:13PM
[  1826.610] xorg-server 2:1.13.3-0ubuntu6 (For technical support please see http://www.ubuntu.com/support) 
[  1826.610] Current version of pixman: 0.28.2
[  1826.610] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  1826.610] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1826.610] (==) Log file: "/var/log/Xorg.8.log", Time: Tue Apr 23 22:54:47 2013
[  1826.610] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[  1826.610] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[  1826.610] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1826.612] (==) ServerLayout "Layout0"
[  1826.612] (==) No screen section available. Using defaults.
[  1826.612] (**) |-->Screen "Default Screen Section" (0)
[  1826.612] (**) |   |-->Monitor "<default monitor>"
[  1826.612] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[  1826.612] (**) |   |-->Device "DiscreteNvidia"
[  1826.612] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  1826.612] (**) Option "AutoAddDevices" "false"
[  1826.612] (**) Option "AutoAddGPU" "false"
[  1826.612] (**) Not automatically adding devices
[  1826.612] (==) Automatically enabling devices
[  1826.612] (**) Not automatically adding GPU devices
[  1826.612] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[  1826.612] 	Entry deleted from font path.
[  1826.612] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[  1826.612] 	Entry deleted from font path.
[  1826.612] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[  1826.612] 	Entry deleted from font path.
[  1826.612] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[  1826.612] 	Entry deleted from font path.
[  1826.612] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[  1826.612] 	Entry deleted from font path.
[  1826.612] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[  1826.612] 	Entry deleted from font path.
[  1826.612] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[  1826.612] (++) ModulePath set to "/usr/lib/nvidia-304/xorg,/usr/lib/xorg/modules"
[  1826.612] (==) |-->Input Device "<default pointer>"
[  1826.612] (==) |-->Input Device "<default keyboard>"
[  1826.612] (==) The core pointer device wasn't specified explicitly in the layout.
	Using the default mouse configuration.
[  1826.612] (==) The core keyboard device wasn't specified explicitly in the layout.
	Using the default keyboard configuration.
[  1826.612] (II) Loader magic: 0x7f2c5f295d20
[  1826.612] (II) Module ABI versions:
[  1826.612] 	X.Org ANSI C Emulation: 0.4
[  1826.612] 	X.Org Video Driver: 13.1
[  1826.612] 	X.Org XInput driver : 18.0
[  1826.612] 	X.Org Server Extension : 7.0
[  1826.612] (II) config/udev: Adding drm device (/dev/dri/card0)
[  1826.613] (--) PCI: (0:1:0:0) 10de:1051:144d:c606 rev 161, Mem @ 0xe0000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x00003000/128
[  1826.614] (II) Open ACPI successful (/var/run/acpid.socket)
[  1826.614] Initializing built-in extension Generic Event Extension
[  1826.614] Initializing built-in extension SHAPE
[  1826.614] Initializing built-in extension MIT-SHM
[  1826.614] Initializing built-in extension XInputExtension
[  1826.614] Initializing built-in extension XTEST
[  1826.614] Initializing built-in extension BIG-REQUESTS
[  1826.614] Initializing built-in extension SYNC
[  1826.614] Initializing built-in extension XKEYBOARD
[  1826.614] Initializing built-in extension XC-MISC
[  1826.614] Initializing built-in extension SECURITY
[  1826.614] Initializing built-in extension XINERAMA
[  1826.614] Initializing built-in extension XFIXES
[  1826.614] Initializing built-in extension RENDER
[  1826.614] Initializing built-in extension RANDR
[  1826.614] Initializing built-in extension COMPOSITE
[  1826.614] Initializing built-in extension DAMAGE
[  1826.614] Initializing built-in extension MIT-SCREEN-SAVER
[  1826.614] Initializing built-in extension DOUBLE-BUFFER
[  1826.614] Initializing built-in extension RECORD
[  1826.614] Initializing built-in extension DPMS
[  1826.614] Initializing built-in extension X-Resource
[  1826.614] Initializing built-in extension XVideo
[  1826.614] Initializing built-in extension XVideo-MotionCompensation
[  1826.614] Initializing built-in extension SELinux
[  1826.614] Initializing built-in extension XFree86-VidModeExtension
[  1826.614] Initializing built-in extension XFree86-DGA
[  1826.614] Initializing built-in extension XFree86-DRI
[  1826.614] Initializing built-in extension DRI2
[  1826.614] (II) LoadModule: "glx"
[  1826.614] (II) Loading /usr/lib/nvidia-304/xorg/libglx.so
[  1826.625] (II) Module glx: vendor="NVIDIA Corporation"
[  1826.625] 	compiled for 4.0.2, module version = 1.0.0
[  1826.625] 	Module class: X.Org Server Extension
[  1826.625] (II) NVIDIA GLX Module  304.88  Wed Mar 27 14:46:57 PDT 2013
[  1826.625] Loading extension GLX
[  1826.625] (==) Matched intel as autoconfigured driver 0
[  1826.625] (==) Matched intel as autoconfigured driver 1
[  1826.625] (==) Matched vesa as autoconfigured driver 2
[  1826.625] (==) Matched modesetting as autoconfigured driver 3
[  1826.625] (==) Matched fbdev as autoconfigured driver 4
[  1826.625] (==) Assigned the driver to the xf86ConfigLayout
[  1826.625] (II) LoadModule: "intel"
[  1826.626] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[  1826.626] (II) Module intel: vendor="X.Org Foundation"
[  1826.626] 	compiled for 1.13.3, module version = 2.21.6
[  1826.626] 	Module class: X.Org Video Driver
[  1826.626] 	ABI class: X.Org Video Driver, version 13.1
[  1826.626] (II) LoadModule: "vesa"
[  1826.626] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[  1826.626] (II) Module vesa: vendor="X.Org Foundation"
[  1826.626] 	compiled for 1.12.99.902, module version = 2.3.2
[  1826.626] 	Module class: X.Org Video Driver
[  1826.626] 	ABI class: X.Org Video Driver, version 13.0
[  1826.626] (II) LoadModule: "modesetting"
[  1826.626] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  1826.626] (II) Module modesetting: vendor="X.Org Foundation"
[  1826.626] 	compiled for 1.13.3, module version = 0.7.0
[  1826.626] 	Module class: X.Org Video Driver
[  1826.626] 	ABI class: X.Org Video Driver, version 13.1
[  1826.626] (II) LoadModule: "fbdev"
[  1826.626] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[  1826.626] (II) Module fbdev: vendor="X.Org Foundation"
[  1826.626] 	compiled for 1.12.99.902, module version = 0.4.3
[  1826.626] 	Module class: X.Org Video Driver
[  1826.626] 	ABI class: X.Org Video Driver, version 13.0
[  1826.626] (II) LoadModule: "mouse"
[  1826.626] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[  1826.626] (II) Module mouse: vendor="X.Org Foundation"
[  1826.626] 	compiled for 1.13.0, module version = 1.7.2
[  1826.626] 	Module class: X.Org XInput Driver
[  1826.626] 	ABI class: X.Org XInput driver, version 18.0
[  1826.626] (II) LoadModule: "kbd"
[  1826.626] (WW) Warning, couldn't open module kbd
[  1826.626] (II) UnloadModule: "kbd"
[  1826.626] (II) Unloading kbd
[  1826.626] (EE) Failed to load module "kbd" (module does not exist, 0)
[  1826.626] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
[  1826.627] (II) VESA: driver for VESA chipsets: vesa
[  1826.627] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  1826.627] (II) FBDEV: driver for framebuffer: fbdev
[  1826.627] (--) using VT number 7

[  1826.627] (WW) Falling back to old probe method for vesa
[  1826.627] (WW) Falling back to old probe method for modesetting
[  1826.627] (II) modesetting(1): using default device
[  1826.627] (WW) Falling back to old probe method for fbdev
[  1826.627] (II) Loading sub module "fbdevhw"
[  1826.627] (II) LoadModule: "fbdevhw"
[  1826.627] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[  1826.627] (II) Module fbdevhw: vendor="X.Org Foundation"
[  1826.627] 	compiled for 1.13.3, module version = 0.0.2
[  1826.627] 	ABI class: X.Org Video Driver, version 13.1
[  1826.627] (II) FBDEV(2): using default device
[  1826.627] (EE) Screen 0 deleted because of no matching config section.
[  1826.627] (II) UnloadModule: "modesetting"
[  1826.627] (II) modesetting(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  1826.627] (==) modesetting(0): Depth 24, (==) framebuffer bpp 32
[  1826.627] (==) modesetting(0): RGB weight 888
[  1826.627] (==) modesetting(0): Default visual is TrueColor
[  1826.627] (II) modesetting(0): ShadowFB: preferred YES, enabled YES
[  1826.627] (II) modesetting(0): Output LVDS-0 has no monitor section
[  1826.640] (II) modesetting(0): Output VGA-0 has no monitor section
[  1826.656] (II) modesetting(0): Output HDMI-0 has no monitor section
[  1826.704] (II) modesetting(0): Output DisplayPort-0 has no monitor section
[  1826.704] (II) modesetting(0): EDID for output LVDS-0
[  1826.704] (II) modesetting(0): Manufacturer: SEC  Model: 324a  Serial#: 0
[  1826.704] (II) modesetting(0): Year: 2011  Week: 0
[  1826.704] (II) modesetting(0): EDID Version: 1.3
[  1826.704] (II) modesetting(0): Digital Display Input
[  1826.704] (II) modesetting(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[  1826.704] (II) modesetting(0): Gamma: 2.20
[  1826.704] (II) modesetting(0): No DPMS capabilities specified
[  1826.704] (II) modesetting(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[  1826.704] (II) modesetting(0): First detailed timing is preferred mode
[  1826.704] (II) modesetting(0): redX: 0.570 redY: 0.340   greenX: 0.330 greenY: 0.560
[  1826.704] (II) modesetting(0): blueX: 0.160 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
[  1826.704] (II) modesetting(0): Manufacturer's mask: 0
[  1826.704] (II) modesetting(0): Supported detailed timing:
[  1826.704] (II) modesetting(0): clock: 70.7 MHz   Image Size:  344 x 194 mm
[  1826.704] (II) modesetting(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1486 h_border: 0
[  1826.704] (II) modesetting(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 792 v_border: 0
[  1826.704] (II) modesetting(0): Unknown vendor-specific block f
[  1826.704] (II) modesetting(0):  SAMSUNG
[  1826.704] (II) modesetting(0):  LTN156AT190
[  1826.704] (II) modesetting(0): EDID (in hex):
[  1826.704] (II) modesetting(0): 	00ffffffffffff004ca34a3200000000
[  1826.704] (II) modesetting(0): 	00150103802213780a09259257548f29
[  1826.704] (II) modesetting(0): 	22505400000001010101010101010101
[  1826.704] (II) modesetting(0): 	0101010101019e1b5678500018303020
[  1826.704] (II) modesetting(0): 	250058c2100000190000000f00000000
[  1826.704] (II) modesetting(0): 	00000000002387026401000000fe0053
[  1826.704] (II) modesetting(0): 	414d53554e470a2020202020000000fe
[  1826.704] (II) modesetting(0): 	004c544e31353641543139300a2000b4
[  1826.705] (II) modesetting(0): Printing probed modes for output LVDS-0
[  1826.705] (II) modesetting(0): Modeline "1366x768"x60.1   70.70  1366 1414 1446 1486  768 770 775 792 -hsync -vsync (47.6 kHz eP)
[  1826.705] (II) modesetting(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[  1826.705] (II) modesetting(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[  1826.705] (II) modesetting(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[  1826.705] (II) modesetting(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[  1826.705] (II) modesetting(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[  1826.705] (II) modesetting(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[  1826.705] (II) modesetting(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[  1826.705] (II) modesetting(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[  1826.705] (II) modesetting(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[  1826.705] (II) modesetting(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[  1826.705] (II) modesetting(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[  1826.705] (II) modesetting(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[  1826.705] (II) modesetting(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[  1826.705] (II) modesetting(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[  1826.705] (II) modesetting(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[  1826.705] (II) modesetting(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[  1826.705] (II) modesetting(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[  1826.705] (II) modesetting(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[  1826.705] (II) modesetting(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[  1826.705] (II) modesetting(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[  1826.705] (II) modesetting(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[  1826.705] (II) modesetting(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[  1826.706] (II) modesetting(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[  1826.706] (II) modesetting(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[  1826.706] (II) modesetting(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[  1826.706] (II) modesetting(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[  1826.706] (II) modesetting(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[  1826.720] (II) modesetting(0): EDID for output VGA-0
[  1826.736] (II) modesetting(0): EDID for output HDMI-0
[  1826.784] (II) modesetting(0): EDID for output DisplayPort-0
[  1826.784] (II) modesetting(0): Output LVDS-0 connected
[  1826.784] (II) modesetting(0): Output VGA-0 disconnected
[  1826.784] (II) modesetting(0): Output HDMI-0 disconnected
[  1826.784] (II) modesetting(0): Output DisplayPort-0 disconnected
[  1826.784] (II) modesetting(0): Using exact sizes for initial modes
[  1826.784] (II) modesetting(0): Output LVDS-0 using initial mode 1366x768
[  1826.784] (II) modesetting(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  1826.784] (==) modesetting(0): DPI set to (96, 96)
[  1826.784] (II) Loading sub module "fb"
[  1826.784] (II) LoadModule: "fb"
[  1826.784] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1826.785] (II) Module fb: vendor="X.Org Foundation"
[  1826.785] 	compiled for 1.13.3, module version = 1.0.0
[  1826.785] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1826.785] (II) Loading sub module "shadow"
[  1826.785] (II) LoadModule: "shadow"
[  1826.785] (II) Loading /usr/lib/xorg/modules/libshadow.so
[  1826.785] (II) Module shadow: vendor="X.Org Foundation"
[  1826.785] 	compiled for 1.13.3, module version = 1.1.0
[  1826.785] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1826.785] (II) FBDEV(1): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  1826.785] (==) FBDEV(1): Depth 24, (==) framebuffer bpp 32
[  1826.785] (==) FBDEV(1): RGB weight 888
[  1826.785] (==) FBDEV(1): Default visual is TrueColor
[  1826.785] (==) FBDEV(1): Using gamma correction (1.0, 1.0, 1.0)
[  1826.785] (II) FBDEV(1): hardware: inteldrmfb (video memory: 4128kB)
[  1826.785] (II) FBDEV(1): checking modes against framebuffer device...
[  1826.785] (II) FBDEV(1): checking modes against monitor...
[  1826.785] (--) FBDEV(1): Virtual size is 1366x768 (pitch 1366)
[  1826.786] (**) FBDEV(1):  Built-in mode "current"
[  1826.786] (==) FBDEV(1): DPI set to (96, 96)
[  1826.786] (II) Loading sub module "fb"
[  1826.786] (II) LoadModule: "fb"
[  1826.786] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1826.786] (II) Module fb: vendor="X.Org Foundation"
[  1826.786] 	compiled for 1.13.3, module version = 1.0.0
[  1826.786] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1826.786] (**) FBDEV(1): using shadow framebuffer
[  1826.786] (II) Loading sub module "shadow"
[  1826.786] (II) LoadModule: "shadow"
[  1826.786] (II) Loading /usr/lib/xorg/modules/libshadow.so
[  1826.786] (II) Module shadow: vendor="X.Org Foundation"
[  1826.786] 	compiled for 1.13.3, module version = 1.1.0
[  1826.786] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1826.786] (II) UnloadModule: "intel"
[  1826.786] (II) Unloading intel
[  1826.786] (II) UnloadModule: "vesa"
[  1826.786] (II) Unloading vesa
[  1826.787] (==) Depth 24 pixmap format is 32 bpp
[  1826.787] Unable to set master
[  1826.787] 
Fatal server error:
[  1826.787] AddScreen/ScreenInit failed for driver 0
[  1826.787] 
[  1826.787] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[  1826.787] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[  1826.787] (EE) 
[  1826.787] Server terminated with error (1). Closing log file.

cdjklm

$ optirun -vv glxinfo
[ 156.409312] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 156.409544] [INFO]Configured driver: nvidia
[ 156.409712] [DEBUG]optirun version 3.2 starting...
[ 156.409734] [DEBUG]Active configuration:
[ 156.409746] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 156.409766] [DEBUG] X display: :8
[ 156.409783] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-experimental-310:/usr/lib32/nvidia-experimental-310
[ 156.409795] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 156.409804] [DEBUG] Accel/display bridge: auto
[ 156.409814] [DEBUG] VGL Compression: proxy
[ 156.409825] [DEBUG] VGLrun extra options:
[ 156.409835] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[ 156.409853] [DEBUG]Using auto-detected bridge primus
[ 156.426806] [INFO]Response: No - error: [XORG] (EE) Failed to load module "nv" (module does not exist, 0)

[ 156.426824] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "nv" (module does not exist, 0)

[ 156.426828] [DEBUG]Socket closed.
[ 156.426841] [ERROR]Aborting because fallback start is disabled.
[ 156.426846] [DEBUG]Killing all remaining processes.

log Xorg.8.log

[ 156.411]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 156.411] X Protocol Version 11, Revision 0
[ 156.411] Build Operating System: Linux 2.6.42-37-generic x86_64 Ubuntu
[ 156.411] Current Operating System: Linux cdjklm-N55SF 3.2.0-40-generic #64-Ubuntu SMP Mon Mar 25 21:22:10 UTC 2013 x86_64
[ 156.411] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-40-generic root=UUID=a167518a-123b-4dd5-9fd1-dd80e263f625 ro quiet splash vt.handoff=7
[ 156.411] Build Date: 11 April 2013 01:05:39PM
[ 156.411] xorg-server 2:1.11.4-0ubuntu10.13 (For technical support please see http://www.ubuntu.com/support)
[ 156.411] Current version of pixman: 0.24.4
[ 156.411] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 156.411] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 156.411] (==) Log file: "/var/log/Xorg.8.log", Time: Tue Apr 23 22:28:04 2013
[ 156.411] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 156.411] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 156.412] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 156.412] (==) ServerLayout "Layout0"
[ 156.412] (==) No screen section available. Using defaults.
[ 156.412] (**) |-->Screen "Default Screen Section" (0)
[ 156.412] (**) | |-->Monitor "<default monitor>"
[ 156.412] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 156.412] (**) | |-->Device "DiscreteNvidia"
[ 156.412] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 156.412] (**) Option "AutoAddDevices" "false"
[ 156.412] (**) Not automatically adding devices
[ 156.412] (==) Automatically enabling devices
[ 156.412] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 156.412] Entry deleted from font path.
[ 156.412] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 156.412] Entry deleted from font path.
[ 156.412] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 156.412] Entry deleted from font path.
[ 156.412] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 156.412] Entry deleted from font path.
[ 156.412] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 156.412] Entry deleted from font path.
[ 156.412] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 156.412] Entry deleted from font path.
[ 156.412] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 156.412] (++) ModulePath set to "/usr/lib/nvidia-experimental-310/xorg,/usr/lib/xorg/modules"
[ 156.412] (==) |-->Input Device "<default pointer>"
[ 156.412] (==) |-->Input Device "<default keyboard>"
[ 156.412] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 156.412] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 156.412] (II) Loader magic: 0x7fdf50913b00
[ 156.412] (II) Module ABI versions:
[ 156.412] X.Org ANSI C Emulation: 0.4
[ 156.412] X.Org Video Driver: 11.0
[ 156.412] X.Org XInput driver : 16.0
[ 156.412] X.Org Server Extension : 6.0
[ 156.413] (--) PCI:*(0:1:0:0) 10de:1247:1043:2050 rev 161, Mem @ 0xda000000/33554432, 0xc0000000/268435456, 0xd0000000/67108864, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 156.413] (II) Open ACPI successful (/var/run/acpid.socket)
[ 156.413] (II) LoadModule: "extmod"
[ 156.413] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 156.413] (II) Module extmod: vendor="X.Org Foundation"
[ 156.413] compiled for 1.11.3, module version = 1.0.0
[ 156.413] Module class: X.Org Server Extension
[ 156.413] ABI class: X.Org Server Extension, version 6.0
[ 156.413] (II) Loading extension MIT-SCREEN-SAVER
[ 156.413] (II) Loading extension XFree86-VidModeExtension
[ 156.413] (II) Loading extension XFree86-DGA
[ 156.413] (II) Loading extension DPMS
[ 156.413] (II) Loading extension XVideo
[ 156.413] (II) Loading extension XVideo-MotionCompensation
[ 156.413] (II) Loading extension X-Resource
[ 156.413] (II) LoadModule: "dbe"
[ 156.413] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 156.413] (II) Module dbe: vendor="X.Org Foundation"
[ 156.413] compiled for 1.11.3, module version = 1.0.0
[ 156.413] Module class: X.Org Server Extension
[ 156.413] ABI class: X.Org Server Extension, version 6.0
[ 156.413] (II) Loading extension DOUBLE-BUFFER
[ 156.413] (II) LoadModule: "glx"
[ 156.413] (II) Loading /usr/lib/nvidia-experimental-310/xorg/libglx.so
[ 156.420] (II) Module glx: vendor="NVIDIA Corporation"
[ 156.420] compiled for 4.0.2, module version = 1.0.0
[ 156.420] Module class: X.Org Server Extension
[ 156.420] (II) NVIDIA GLX Module 310.14 Tue Oct 9 12:14:30 PDT 2012
[ 156.420] (II) Loading extension GLX
[ 156.420] (II) LoadModule: "record"
[ 156.421] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 156.421] (II) Module record: vendor="X.Org Foundation"
[ 156.421] compiled for 1.11.3, module version = 1.13.0
[ 156.421] Module class: X.Org Server Extension
[ 156.421] ABI class: X.Org Server Extension, version 6.0
[ 156.421] (II) Loading extension RECORD
[ 156.421] (II) LoadModule: "dri"
[ 156.421] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 156.421] (II) Module dri: vendor="X.Org Foundation"
[ 156.421] compiled for 1.11.3, module version = 1.0.0
[ 156.421] ABI class: X.Org Server Extension, version 6.0
[ 156.421] (II) Loading extension XFree86-DRI
[ 156.421] (II) LoadModule: "dri2"
[ 156.421] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 156.421] (II) Module dri2: vendor="X.Org Foundation"
[ 156.421] compiled for 1.11.3, module version = 1.2.0
[ 156.421] ABI class: X.Org Server Extension, version 6.0
[ 156.421] (II) Loading extension DRI2
[ 156.421] (==) Matched nvidia as autoconfigured driver 0
[ 156.421] (==) Matched nouveau as autoconfigured driver 1
[ 156.421] (==) Matched nv as autoconfigured driver 2
[ 156.421] (==) Matched vesa as autoconfigured driver 3
[ 156.421] (==) Matched fbdev as autoconfigured driver 4
[ 156.421] (==) Assigned the driver to the xf86ConfigLayout
[ 156.421] (II) LoadModule: "nvidia"
[ 156.421] (II) Loading /usr/lib/nvidia-experimental-310/xorg/nvidia_drv.so
[ 156.421] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 156.421] compiled for 4.0.2, module version = 1.0.0
[ 156.421] Module class: X.Org Video Driver
[ 156.421] (II) LoadModule: "nouveau"
[ 156.422] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 156.422] (II) Module nouveau: vendor="X.Org Foundation"
[ 156.422] compiled for 1.11.3, module version = 1.0.2
[ 156.422] Module class: X.Org Video Driver
[ 156.422] ABI class: X.Org Video Driver, version 11.0
[ 156.422] (II) LoadModule: "nv"
[ 156.422] (WW) Warning, couldn't open module nv
[ 156.422] (II) UnloadModule: "nv"
[ 156.422] (II) Unloading nv
[ 156.422] (EE) Failed to load module "nv" (module does not exist, 0)
[ 156.422] (II) LoadModule: "vesa"
[ 156.422] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 156.422] (II) Module vesa: vendor="X.Org Foundation"
[ 156.422] compiled for 1.11.3, module version = 2.3.0
[ 156.422] Module class: X.Org Video Driver
[ 156.422] ABI class: X.Org Video Driver, version 11.0
[ 156.422] (II) LoadModule: "fbdev"
[ 156.422] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 156.422] (II) Module fbdev: vendor="X.Org Foundation"
[ 156.422] compiled for 1.11.3, module version = 0.4.2
[ 156.422] ABI class: X.Org Video Driver, version 11.0
[ 156.422] (==) Matched nvidia as autoconfigured driver 0
[ 156.422] (==) Matched nouveau as autoconfigured driver 1
[ 156.422] (==) Matched nv as autoconfigured driver 2
[ 156.422] (==) Matched vesa as autoconfigured driver 3
[ 156.422] (==) Matched fbdev as autoconfigured driver 4
[ 156.422] (==) Assigned the driver to the xf86ConfigLayout
[ 156.422] (II) LoadModule: "nvidia"
[ 156.422] (II) Loading /usr/lib/nvidia-experimental-310/xorg/nvidia_drv.so
[ 156.422] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 156.422] compiled for 4.0.2, module version = 1.0.0
[ 156.422] Module class: X.Org Video Driver
[ 156.422] (II) UnloadModule: "nvidia"
[ 156.422] (II) Unloading nvidia
[ 156.422] (II) Failed to load module "nvidia" (already loaded, 32735)
[ 156.422] (II) LoadModule: "nouveau"
[ 156.422] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 156.422] (II) Module nouveau: vendor="X.Org Foundation"
[ 156.422] compiled for 1.11.3, module version = 1.0.2
[ 156.422] Module class: X.Org Video Driver
[ 156.422] ABI class: X.Org Video Driver, version 11.0
[ 156.422] (II) UnloadModule: "nouveau"
[ 156.422] (II) Unloading nouveau
[ 156.422] (II) Failed to load module "nouveau" (already loaded, 32735)
[ 156.422] (II) LoadModule: "nv"
[ 156.423] (WW) Warning, couldn't open module nv
[ 156.423] (II) UnloadModule: "nv"
[ 156.423] (II) Unloading nv
[ 156.423] (EE) Failed to load module "nv" (module does not exist, 0)
[ 156.423] (II) LoadModule: "vesa"
[ 156.423] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 156.423] (II) Module vesa: vendor="X.Org Foundation"
[ 156.423] compiled for 1.11.3, module version = 2.3.0
[ 156.423] Module class: X.Org Video Driver
[ 156.423] ABI class: X.Org Video Driver, version 11.0
[ 156.423] (II) UnloadModule: "vesa"
[ 156.423] (II) Unloading vesa
[ 156.423] (II) Failed to load module "vesa" (already loaded, 0)
[ 156.423] (II) LoadModule: "fbdev"
[ 156.423] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 156.423] (II) Module fbdev: vendor="X.Org Foundation"
[ 156.423] compiled for 1.11.3, module version = 0.4.2
[ 156.423] ABI class: X.Org Video Driver, version 11.0
[ 156.423] (II) UnloadModule: "fbdev"
[ 156.423] (II) Unloading fbdev
[ 156.423] (II) Failed to load module "fbdev" (already loaded, 0)
[ 156.423] (II) LoadModule: "mouse"
[ 156.423] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 156.423] (II) Module mouse: vendor="X.Org Foundation"
[ 156.423] compiled for 1.11.3, module version = 1.7.1
[ 156.423] Module class: X.Org XInput Driver
[ 156.423] ABI class: X.Org XInput driver, version 16.0
[ 156.423] (II) LoadModule: "kbd"
[ 156.423] (WW) Warning, couldn't open module kbd
[ 156.423] (II) UnloadModule: "kbd"
[ 156.423] (II) Unloading kbd
[ 156.423] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 156.423] (II) NVIDIA dlloader X Driver 310.14 Tue Oct 9 11:54:19 PDT 2012
[ 156.423] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 156.423] (II) NOUVEAU driver Date: Wed Sep 12 13:42:43 2012 +0200
[ 156.423] (II) NOUVEAU driver for NVIDIA chipset families :
[ 156.423] RIVA TNT (NV04)
[ 156.423] RIVA TNT2 (NV05)
[ 156.423] GeForce 256 (NV10)
[ 156.423] GeForce 2 (NV11, NV15)
[ 156.423] GeForce 4MX (NV17, NV18)
[ 156.423] GeForce 3 (NV20)
[ 156.423] GeForce 4Ti (NV25, NV28)
[ 156.423] GeForce FX (NV3x)
[ 156.423] GeForce 6 (NV4x)
[ 156.423] GeForce 7 (G7x)
[ 156.423] GeForce 8 (G8x)
[ 156.423] GeForce GTX 200 (NVA0)
[ 156.423] GeForce GTX 400 (NVC0)
[ 156.423] (II) VESA: driver for VESA chipsets: vesa
[ 156.423] (II) FBDEV: driver for framebuffer: fbdev
[ 156.423] (--) using VT number 7

[ 156.424] (II) Loading sub module "wfb"
[ 156.424] (II) LoadModule: "wfb"
[ 156.424] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 156.424] (II) Module wfb: vendor="X.Org Foundation"
[ 156.424] compiled for 1.11.3, module version = 1.0.0
[ 156.424] ABI class: X.Org ANSI C Emulation, version 0.4
[ 156.424] (II) Loading sub module "ramdac"
[ 156.424] (II) LoadModule: "ramdac"
[ 156.424] (II) Module "ramdac" already built-in
[ 156.424] (II) Loading /usr/lib/nvidia-experimental-310/xorg/nvidia_drv.so
[ 156.424] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 156.424] (WW) Falling back to old probe method for vesa
[ 156.424] (WW) Falling back to old probe method for fbdev
[ 156.424] (II) Loading sub module "fbdevhw"
[ 156.424] (II) LoadModule: "fbdevhw"
[ 156.424] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 156.424] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 156.424] compiled for 1.11.3, module version = 0.0.2
[ 156.424] ABI class: X.Org Video Driver, version 11.0
[ 156.424] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 156.424] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 156.424] (==) NVIDIA(0): RGB weight 888
[ 156.424] (==) NVIDIA(0): Default visual is TrueColor
[ 156.424] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 156.424] (**) NVIDIA(0): Enabling 2D acceleration
[ 156.424] (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module. Please see the
[ 156.424] (EE) NVIDIA(0): system's kernel log for additional error messages and
[ 156.424] (EE) NVIDIA(0): consult the NVIDIA README for details.
[ 156.424] (EE) NVIDIA(0): *** Aborting ***
[ 156.424] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 156.424] (II) UnloadModule: "nvidia"
[ 156.424] (II) Unloading nvidia
[ 156.424] (II) UnloadModule: "wfb"
[ 156.424] (II) Unloading wfb
[ 156.424] (EE) Screen(s) found, but none have a usable configuration.
[ 156.424]
Fatal server error:
[ 156.424] no screens found
[ 156.424]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 156.424] Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 156.424]
[ 156.425] ddxSigGiveUp: Closing log
[ 156.425] Server terminated with error (1). Closing log file.

BUMBLEBEE.CONF

# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia

## Client options. Will take effect on the next optirun executed.
[optirun]
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false

# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-current
Module=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-experimental-310:/usr/lib32/nvidia-experimental-310
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-experimental-310/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

XORG.CONF.NVIDIA

Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
EndSection

Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "ConnectedMonitor" "DFP"
EndSection

BUSID.CONF

Section "Device"
Identifier "DiscreteNvidia"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
# BusID "PCI:02:00:0"
EndSection

voila j espère que ça va aider la comunautée

GP974

c'est fais aucun changement ...

sudo apt-get install --reinstall bumblebee
[sudo] password for guillaume: 
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
0 mis à jour, 0 nouvellement installés, 1 réinstallés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 63,1 ko dans les archives.
Après cette opération, 0 o d'espace disque supplémentaires seront utilisés.
Réception de : 1 http://ppa.launchpad.net/bumblebee/stable/ubuntu/ raring/main bumblebee amd64 3.2-1~raringppa1 [63,1 kB]
63,1 ko réceptionnés en 1s (38,5 ko/s)
(Lecture de la base de données... 244161 fichiers et répertoires déjà installés.)
Préparation du remplacement de bumblebee 3.2-1~raringppa1 (en utilisant .../bumblebee_3.2-1~raringppa1_amd64.deb) ...
bumblebeed stop/waiting
Dépaquetage de la mise à jour de bumblebee ...
Traitement des actions différées (« triggers ») pour « ureadahead »...
Traitement des actions différées (« triggers ») pour « man-db »...
Paramétrage de bumblebee (3.2-1~raringppa1) ...
Selecting 01:00:0 as discrete nvidia card. If this is incorrect,
edit the BusID line in /etc/bumblebee/xorg.conf.d/busid.conf
update-initramfs: deferring update (trigger activated)
bumblebeed start/running, process 4685
Traitement des actions différées (« triggers ») pour « initramfs-tools »...
update-initramfs: Generating /boot/initrd.img-3.8.0-19-generic

optirun -vv glxinfo
[  193.499772] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[  193.500893] [DEBUG]optirun version 3.2 starting...
[  193.500920] [DEBUG]Active configuration:
[  193.500931] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[  193.500942] [DEBUG] X display: :8
[  193.500952] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-304:/usr/lib32/nvidia-304
[  193.500963] [DEBUG] Socket path: /var/run/bumblebee.socket
[  193.500973] [DEBUG] Accel/display bridge: primus
[  193.500983] [DEBUG] VGL Compression: proxy
[  193.500993] [DEBUG] VGLrun extra options: 
[  193.501003] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[  194.640772] [INFO]Response: Yes. X is active.

[  194.640822] [INFO]Running application using primus.
[  194.641111] [DEBUG]Process glxinfo started, PID 10151.
name of display: :0
Xlib:  extension "GLX" missing on display ":8".
[  194.842647] [DEBUG]SIGCHILD received, but wait failed with No child processes
[  194.842674] [DEBUG]Socket closed.
[  194.842689] [DEBUG]Killing all remaining processes.

a noter aucun nouveau fichier generé....

cat /etc/bumblebee/xorg.conf.nvidia
cat: /etc/bumblebee/xorg.conf.nvidia: Aucun fichier ou dossier de ce type

ls /etc/bumblebee/
bumblebee.conf 
xorg.conf.nouveau.dpkg-old
bumblebee.conf.dpkg-old     
xorg.conf.d/
xorg.conf.nvidia.dpkg-dist
xorg.conf.nouveau

ArchangeGabriel

Renomme le .dpkg-dist en supprimant cette extension, mais ça ne va rien changer a priori, le bug semble toucher toutes les versions, sauf le driver 319.12...

GP974

@ArchangeGabriel
si c'est a moi que tu parle je n'ai pas compris ta demande...
ou est le .dpkg-dist a renomer
merci

a tous hasard je tente le fichier dont le nom est le plus proche xorg.conf.nvidia.dpkg-dist

ArchangeGabriel

Dans /etc/bumblebee/ : xorg.conf.nvidia.dpkg-dist -> xorg.conf.nvidia, et tu redonnes tes logs, surtout le Xorg.8.log.

« Page précédente Page suivante »