C'est sympa de prendre le temps de fouiller là-dedans. 🙂
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-37-generic (buildd@kapok) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #64-Ubuntu SMP Mon Sep 22 21:28:38 UTC 2014 (Ubuntu 3.13.0-37.64-generic 3.13.11.7)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic root=UUID=5db35289-3a5f-428d-b854-33f80bf48f53 ro quiet splash rcutree.rcu_idle_gp_delay=1 vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009c8aefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009c8af000-0x000000009ceaefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ceaf000-0x000000009cfaefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cfaf000-0x000000009cffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001df5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion 17 Notebook PC /2282, BIOS F.11 08/07/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1df600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 0080000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 009D000000 mask 7FFF000000 uncachable
[ 0.000000] 3 base 009E000000 mask 7FFE000000 uncachable
[ 0.000000] 4 base 00FFC00000 mask 7FFFC00000 write-protect
[ 0.000000] 5 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 6 base 01DF600000 mask 7FFFE00000 uncachable
[ 0.000000] 7 base 01DF800000 mask 7FFF800000 uncachable
[ 0.000000] 8 base 01E0000000 mask 7FE0000000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1df400000-0x1df5fffff]
[ 0.000000] [mem 0x1df400000-0x1df5fffff] page 2M
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1dc000000-0x1df3fffff]
[ 0.000000] [mem 0x1dc000000-0x1df3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x180000000-0x1dbffffff]
[ 0.000000] [mem 0x180000000-0x1bfffffff] page 1G
[ 0.000000] [mem 0x1c0000000-0x1dbffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9c8aefff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9c7fffff] page 2M
[ 0.000000] [mem 0x9c800000-0x9c8aefff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9cfff000-0x9cffffff]
[ 0.000000] [mem 0x9cfff000-0x9cffffff] page 4k
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[ 0.000000] [mem 0x100000000-0x17fffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x348ae000-0x3644efff]
[ 0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 000000009cffe210 0000BC (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
[ 0.000000] ACPI: FACP 000000009cff8000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20131115/tbfadt-202)
[ 0.000000] ACPI: DSDT 000000009cfe3000 011187 (v01 HPQOEM SLIC-MPC 00000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 000000009cfaa000 000040
[ 0.000000] ACPI: UEFI 000000009cffd000 000236 (v01 HPQOEM 2282 00000001 HP 00040000)
[ 0.000000] ACPI: FPDT 000000009cffb000 000044 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: MSDM 000000009cffa000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: ASF! 000000009cff9000 0000A5 (v32 HPQOEM 2282 00000001 HP 00040000)
[ 0.000000] ACPI: HPET 000000009cff7000 000038 (v01 HPQOEM 2282 00000001 HP 00040000)
[ 0.000000] ACPI: APIC 000000009cff6000 00008C (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: MCFG 000000009cff5000 00003C (v01 HPQOEM 2282 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 000000009cfe1000 0010BF (v01 HPQOEM 2282 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 000000009cfdf000 000028 (v01 HPQOEM 2282 00000001 HP 00040000)
[ 0.000000] ACPI: LPIT 000000009cfde000 000094 (v01 HPQOEM 2282 00000000 HP 00040000)
[ 0.000000] ACPI: ASPT 000000009cfdc000 000034 (v07 HPQOEM 2282 00000001 HP 00040000)
[ 0.000000] ACPI: DBGP 000000009cfdb000 000034 (v01 HPQOEM 2282 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 000000009cfda000 000539 (v01 HPQOEM 2282 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009cfd9000 000AD8 (v01 HPQOEM 2282 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009cfd5000 0034C1 (v01 HPQOEM 2282 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009cfce000 003625 (v01 HPQOEM 2282 00001000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009cfd4000 000405 (v01 HPQOEM 2282 00001000 ACPI 00040000)
[ 0.000000] ACPI: CSRT 000000009cfd2000 0000C4 (v01 HPQOEM 2282 00000001 HP 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001df5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1df5fffff]
[ 0.000000] NODE_DATA [mem 0x1df5f9000-0x1df5fdfff]
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff8801d8c00000-ffff8801debfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1df5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x9c8aefff]
[ 0.000000] node 0: [mem 0x9cfff000-0x9cffffff]
[ 0.000000] node 0: [mem 0x100000000-0x1df5fffff]
[ 0.000000] On node 0 totalpages: 1556044
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9955 pages used for memmap
[ 0.000000] DMA32 zone: 637104 pages, LIFO batch:31
[ 0.000000] Normal zone: 14296 pages used for memmap
[ 0.000000] Normal zone: 914944 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c8af000-0x9ceaefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ceaf000-0x9cfaefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cfaf000-0x9cffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8801df200000 s86400 r8192 d24192 u262144
[ 0.000000] pcpu-alloc: s86400 r8192 d24192 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1531708
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic root=UUID=5db35289-3a5f-428d-b854-33f80bf48f53 ro quiet splash rcutree.rcu_idle_gp_delay=1 vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 6013948K/6224176K available (7375K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1444K bss, 210228K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] NR_IRQS:16640 nr_irqs:1016 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 25165824 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2593.850 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.70 BogoMIPS (lpj=10375400)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000035] Security Framework initialized
[ 0.000055] AppArmor: AppArmor initialized
[ 0.000056] Yama: becoming mindful.
[ 0.000690] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002562] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003341] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.003353] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.003572] Initializing cgroup subsys memory
[ 0.003577] Initializing cgroup subsys devices
[ 0.003579] Initializing cgroup subsys freezer
[ 0.003581] Initializing cgroup subsys blkio
[ 0.003582] Initializing cgroup subsys perf_event
[ 0.003585] Initializing cgroup subsys hugetlb
[ 0.003608] CPU: Physical Processor ID: 0
[ 0.003609] CPU: Processor Core ID: 0
[ 0.003613] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.003613] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.004709] mce: CPU supports 7 MCE banks
[ 0.004723] CPU0: Thermal monitoring enabled (TM1)
[ 0.004735] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.004735] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
[ 0.004735] tlb_flushall_shift: 6
[ 0.004857] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[ 0.005987] ACPI: Core revision 20131115
[ 0.016951] ACPI: All ACPI Tables successfully acquired
[ 0.018585] ftrace: allocating 28541 entries in 112 pages
[ 0.033296] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073005] smpboot: CPU0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz (fam: 06, model: 45, stepping: 01)
[ 0.073011] TSC deadline timer enabled
[ 0.073020] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.073027] ... version: 3
[ 0.073028] ... bit width: 48
[ 0.073029] ... generic registers: 4
[ 0.073030] ... value mask: 0000ffffffffffff
[ 0.073031] ... max period: 0000ffffffffffff
[ 0.073032] ... fixed-purpose events: 3
[ 0.073033] ... event mask: 000000070000000f
[ 0.074779] x86: Booting SMP configuration:
[ 0.089270] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.074781] .... node #0, CPUs: #1 #2 #3
[ 0.117916] x86: Booted up 1 node, 4 CPUs
[ 0.117919] smpboot: Total of 4 processors activated (20750.80 BogoMIPS)
[ 0.562159] devtmpfs: initialized
[ 0.564300] EVM: security.selinux
[ 0.564302] EVM: security.SMACK64
[ 0.564303] EVM: security.ima
[ 0.564304] EVM: security.capability
[ 0.564351] PM: Registering ACPI NVS region [mem 0x9ceaf000-0x9cfaefff] (1048576 bytes)
[ 0.565152] pinctrl core: initialized pinctrl subsystem
[ 0.565207] regulator-dummy: no parameters
[ 0.565238] RTC time: 6:21:50, date: 01/16/15
[ 0.565271] NET: Registered protocol family 16
[ 0.565371] cpuidle: using governor ladder
[ 0.565372] cpuidle: using governor menu
[ 0.565414] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.565415] ACPI: bus type PCI registered
[ 0.565417] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.565474] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.565476] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.587680] PCI: Using configuration type 1 for base access
[ 0.587848] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.587849] mtrr: probably your BIOS does not setup all CPUs.
[ 0.587850] mtrr: corrected configuration.
[ 0.588591] bio: create slab <bio-0> at 0
[ 0.588739] ACPI: Added _OSI(Module Device)
[ 0.588741] ACPI: Added _OSI(Processor Device)
[ 0.588742] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.588743] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.592813] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.599145] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.600397] ACPI: SSDT 000000009ce6fc18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20121018)
[ 0.600919] ACPI: Dynamic OEM Table Load:
[ 0.600921] ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20121018)
[ 0.602266] ACPI: SSDT 000000009ce6f618 0005AA (v01 PmRef ApIst 00003000 INTL 20121018)
[ 0.602857] ACPI: Dynamic OEM Table Load:
[ 0.602859] ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20121018)
[ 0.606122] ACPI: SSDT 000000009ce6ed98 000119 (v01 PmRef ApCst 00003000 INTL 20121018)
[ 0.606639] ACPI: Dynamic OEM Table Load:
[ 0.606641] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20121018)
[ 0.823015] ACPI: Interpreter enabled
[ 0.823025] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.823032] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.823052] ACPI: (supports S0 S3 S4 S5)
[ 0.823054] ACPI: Using IOAPIC for interrupt routing
[ 0.823086] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.823240] ACPI: No dock devices found.
[ 0.842442] ACPI: Power Resource [NVP3] (on)
[ 0.842466] ACPI: Power Resource [NVP2] (on)
[ 0.852054] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.852060] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.852137] \_SB_.PCI0:_OSC invalid UUID
[ 0.852138] _OSC request data:1 1f 0
[ 0.852142] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.852829] PCI host bridge to bus 0000:00
[ 0.852832] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.852834] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.852836] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.852838] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.852840] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[ 0.852848] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.852974] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.852987] pci 0000:00:02.0: reg 0x10: [mem 0xb5000000-0xb53fffff 64bit]
[ 0.852995] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.853000] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
[ 0.853119] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.853128] pci 0000:00:03.0: reg 0x10: [mem 0xb5610000-0xb5613fff 64bit]
[ 0.853273] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.853291] pci 0000:00:14.0: reg 0x10: [mem 0xb5600000-0xb560ffff 64bit]
[ 0.853348] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.853427] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.853456] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.853477] pci 0000:00:16.0: reg 0x10: [mem 0xb5618000-0xb561801f 64bit]
[ 0.853544] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.853658] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.853671] pci 0000:00:1b.0: reg 0x10: [mem 0xb5614000-0xb5617fff 64bit]
[ 0.853732] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.853834] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.853895] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.853979] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.854004] pci 0000:00:1c.1: [8086:9c12] type 01 class 0x060400
[ 0.854065] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.854148] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.854174] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ 0.854236] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.854318] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.854342] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.854408] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.854492] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.854518] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[ 0.854579] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.854672] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.854705] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.854913] pci 0000:00:1d.0: reg 0x10: [mem 0xb561c000-0xb561c3ff]
[ 0.856087] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.856182] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.856215] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.856424] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.856439] pci 0000:00:1f.2: reg 0x10: [io 0x6088-0x608f]
[ 0.856446] pci 0000:00:1f.2: reg 0x14: [io 0x6094-0x6097]
[ 0.856452] pci 0000:00:1f.2: reg 0x18: [io 0x6080-0x6087]
[ 0.856459] pci 0000:00:1f.2: reg 0x1c: [io 0x6090-0x6093]
[ 0.856466] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
[ 0.856473] pci 0000:00:1f.2: reg 0x24: [mem 0xb561b000-0xb561b7ff]
[ 0.856509] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.856617] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.856631] pci 0000:00:1f.3: reg 0x10: [mem 0xb5619000-0xb56190ff 64bit]
[ 0.856651] pci 0000:00:1f.3: reg 0x20: [io 0x6040-0x605f]
[ 0.856807] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.856873] pci 0000:00:1c.1: PCI bridge to [bus 02-07]
[ 0.856877] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.856880] pci 0000:00:1c.1: bridge window [mem 0xb4000000-0xb4ffffff]
[ 0.856886] pci 0000:00:1c.1: bridge window [mem 0xb2000000-0xb2ffffff 64bit pref]
[ 0.856974] pci 0000:08:00.0: [14e4:4365] type 00 class 0x028000
[ 0.857005] pci 0000:08:00.0: reg 0x10: [mem 0xb5500000-0xb5507fff 64bit]
[ 0.857170] pci 0000:08:00.0: supports D1 D2
[ 0.857172] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.862412] pci 0000:00:1c.2: PCI bridge to [bus 08]
[ 0.862417] pci 0000:00:1c.2: bridge window [mem 0xb5500000-0xb55fffff]
[ 0.862492] pci 0000:09:00.0: [10ec:8136] type 00 class 0x020000
[ 0.862509] pci 0000:09:00.0: reg 0x10: [io 0x4000-0x40ff]
[ 0.862537] pci 0000:09:00.0: reg 0x18: [mem 0xb5404000-0xb5404fff 64bit]
[ 0.862555] pci 0000:09:00.0: reg 0x20: [mem 0xb5400000-0xb5403fff 64bit]
[ 0.862629] pci 0000:09:00.0: supports D1 D2
[ 0.862631] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.862680] pci 0000:09:00.0: System wakeup disabled by ACPI
[ 0.870400] pci 0000:00:1c.3: PCI bridge to [bus 09]
[ 0.870403] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.870406] pci 0000:00:1c.3: bridge window [mem 0xb5400000-0xb54fffff]
[ 0.870482] pci 0000:0a:00.0: [10de:1341] type 00 class 0x030200
[ 0.870501] pci 0000:0a:00.0: reg 0x10: [mem 0xb3000000-0xb3ffffff]
[ 0.870520] pci 0000:0a:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.870538] pci 0000:0a:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[ 0.870551] pci 0000:0a:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.870563] pci 0000:0a:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.878408] pci 0000:00:1c.4: PCI bridge to [bus 0a]
[ 0.878411] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.878415] pci 0000:00:1c.4: bridge window [mem 0xb3000000-0xb3ffffff]
[ 0.878419] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 0.879180] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.879229] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.879277] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.879327] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.879372] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.879418] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.879463] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.879508] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.879968] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.879976] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.880030] Found 1 acpi root devices
[ 0.880077] ACPI : EC: GPE = 0x8, I/O: command/status = 0x66, data = 0x62
[ 0.880162] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.880165] vgaarb: loaded
[ 0.880167] vgaarb: bridge control possible 0000:00:02.0
[ 0.880311] SCSI subsystem initialized
[ 0.880353] libata version 3.00 loaded.
[ 0.880372] ACPI: bus type USB registered
[ 0.880386] usbcore: registered new interface driver usbfs
[ 0.880393] usbcore: registered new interface driver hub
[ 0.880412] usbcore: registered new device driver usb
[ 0.880509] PCI: Using ACPI for IRQ routing
[ 0.885997] PCI: pci_cache_line_size set to 64 bytes
[ 0.886061] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.886063] e820: reserve RAM buffer [mem 0x9c8af000-0x9fffffff]
[ 0.886065] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[ 0.886066] e820: reserve RAM buffer [mem 0x1df600000-0x1dfffffff]
[ 0.886139] NetLabel: Initializing
[ 0.886140] NetLabel: domain hash size = 128
[ 0.886141] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.886153] NetLabel: unlabeled traffic allowed by default
[ 0.886201] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.886207] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.888239] Switched to clocksource hpet
[ 0.892734] AppArmor: AppArmor Filesystem Enabled
[ 0.892756] pnp: PnP ACPI init
[ 0.892768] ACPI: bus type PNP registered
[ 0.893177] pnp 00:00: [dma 4]
[ 0.893197] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.893216] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.893311] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.893372] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.893375] system 00:03: [io 0xffff] has been reserved
[ 0.893376] system 00:03: [io 0xffff] has been reserved
[ 0.893378] system 00:03: [io 0xffff] has been reserved
[ 0.893382] system 00:03: [io 0x1800-0x18fe] could not be reserved
[ 0.893383] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.893385] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.893387] system 00:03: [io 0x0380-0x0387] has been reserved
[ 0.893390] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.893429] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.893459] pnp 00:05: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 0.893489] pnp 00:06: Plug and Play ACPI device, IDs SYN1ec0 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.893526] pnp 00:07: Plug and Play ACPI device, IDs HPQ6007 (active)
[ 0.893800] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.893803] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.893805] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.893807] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.893809] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.893810] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.893812] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.893814] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.893816] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.893818] system 00:08: [mem 0x9fa20000-0x9fa20fff] has been reserved
[ 0.893820] system 00:08: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[ 0.893822] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.894139] pnp: PnP ACPI: found 9 devices
[ 0.894140] ACPI: bus type PNP unregistered
[ 0.900089] pci 0000:0a:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 0.900123] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.900133] pci 0000:00:1c.1: PCI bridge to [bus 02-07]
[ 0.900136] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.900140] pci 0000:00:1c.1: bridge window [mem 0xb4000000-0xb4ffffff]
[ 0.900143] pci 0000:00:1c.1: bridge window [mem 0xb2000000-0xb2ffffff 64bit pref]
[ 0.900149] pci 0000:00:1c.2: PCI bridge to [bus 08]
[ 0.900153] pci 0000:00:1c.2: bridge window [mem 0xb5500000-0xb55fffff]
[ 0.900160] pci 0000:00:1c.3: PCI bridge to [bus 09]
[ 0.900162] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.900166] pci 0000:00:1c.3: bridge window [mem 0xb5400000-0xb54fffff]
[ 0.900175] pci 0000:0a:00.0: BAR 6: can't assign mem pref (size 0x80000)
[ 0.900177] pci 0000:00:1c.4: PCI bridge to [bus 0a]
[ 0.900179] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.900183] pci 0000:00:1c.4: bridge window [mem 0xb3000000-0xb3ffffff]
[ 0.900187] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 0.900193] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.900195] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.900197] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.900198] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[ 0.900200] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.900202] pci_bus 0000:02: resource 1 [mem 0xb4000000-0xb4ffffff]
[ 0.900204] pci_bus 0000:02: resource 2 [mem 0xb2000000-0xb2ffffff 64bit pref]
[ 0.900205] pci_bus 0000:08: resource 1 [mem 0xb5500000-0xb55fffff]
[ 0.900207] pci_bus 0000:09: resource 0 [io 0x4000-0x4fff]
[ 0.900209] pci_bus 0000:09: resource 1 [mem 0xb5400000-0xb54fffff]
[ 0.900211] pci_bus 0000:0a: resource 0 [io 0x3000-0x3fff]
[ 0.900212] pci_bus 0000:0a: resource 1 [mem 0xb3000000-0xb3ffffff]
[ 0.900214] pci_bus 0000:0a: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 0.900248] NET: Registered protocol family 2
[ 0.900464] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.900621] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.900752] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.900769] TCP: reno registered
[ 0.900780] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.900810] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.900877] NET: Registered protocol family 1
[ 0.900888] pci 0000:00:02.0: Boot video device
[ 0.916393] PCI: CLS 64 bytes, default 64
[ 0.916445] Trying to unpack rootfs image as initramfs...
[ 1.435339] Freeing initrd memory: 28292K (ffff8800348ae000 - ffff88003644f000)
[ 1.435344] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.435347] software IO TLB [mem 0x988af000-0x9c8af000] (64MB) mapped at [ffff8800988af000-ffff88009c8aefff]
[ 1.435411] Simple Boot Flag at 0x44 set to 0x1
[ 1.435599] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
[ 1.435605] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
[ 1.435609] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
[ 1.435617] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
[ 1.435666] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.435668] Scanning for low memory corruption every 60 seconds
[ 1.435905] Initialise system trusted keyring
[ 1.435948] audit: initializing netlink socket (disabled)
[ 1.435960] type=2000 audit(1421389309.984:1): initialized
[ 1.466518] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.467500] zbud: loaded
[ 1.467641] VFS: Disk quotas dquot_6.5.2
[ 1.467678] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.468051] fuse init (API version 7.22)
[ 1.468112] msgmni has been set to 11801
[ 1.468162] Key type big_key registered
[ 1.468482] Key type asymmetric registered
[ 1.468484] Asymmetric key parser 'x509' registered
[ 1.468512] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.468542] io scheduler noop registered
[ 1.468544] io scheduler deadline registered (default)
[ 1.468565] io scheduler cfq registered
[ 1.469176] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.469189] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.469224] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[ 1.469225] vesafb: scrolling: redraw
[ 1.469227] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.469734] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010f00000, using 5632k, total 5632k
[ 1.611794] Console: switching to colour frame buffer device 200x56
[ 1.753505] fb0: VESA VGA frame buffer device
[ 1.753520] intel_idle: MWAIT substates: 0x11142120
[ 1.753521] intel_idle: v0.4 model 0x45
[ 1.753522] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.753651] ipmi message handler version 39.2
[ 1.754533] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.754697] ACPI: AC Adapter [ADP1] (off-line)
[ 1.754768] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.755238] ACPI: Lid Switch [LID0]
[ 1.755270] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.755273] ACPI: Power Button [PWRB]
[ 1.755299] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.755301] ACPI: Power Button [PWRF]
[ 1.756262] [Firmware Bug]: Invalid critical threshold (0)
[ 1.758128] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.758130] ACPI: Thermal Zone [TZ01] (43 C)
[ 1.758150] GHES: HEST is not enabled!
[ 1.758223] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.760862] Linux agpgart interface v0.103
[ 1.761993] brd: module loaded
[ 1.762568] loop: module loaded
[ 1.762871] libphy: Fixed MDIO Bus: probed
[ 1.762947] tun: Universal TUN/TAP device driver, 1.6
[ 1.762948] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.762985] PPP generic driver version 2.4.2
[ 1.763024] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.763028] ehci-pci: EHCI PCI platform driver
[ 1.763141] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.763146] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.763158] ehci-pci 0000:00:1d.0: debug port 2
[ 1.767080] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.767095] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb561c000
[ 1.776792] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.776829] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.776831] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.776832] usb usb1: Product: EHCI Host Controller
[ 1.776834] usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[ 1.776835] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.776932] hub 1-0:1.0: USB hub found
[ 1.776937] hub 1-0:1.0: 2 ports detected
[ 1.777036] ehci-platform: EHCI generic platform driver
[ 1.777042] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.777044] ohci-pci: OHCI PCI platform driver
[ 1.777052] ohci-platform: OHCI generic platform driver
[ 1.777057] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.777165] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.777169] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.777246] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.777263] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
[ 1.777318] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.777320] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.777322] usb usb2: Product: xHCI Host Controller
[ 1.777323] usb usb2: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[ 1.777325] usb usb2: SerialNumber: 0000:00:14.0
[ 1.777415] hub 2-0:1.0: USB hub found
[ 1.777425] hub 2-0:1.0: 9 ports detected
[ 1.778119] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.778122] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.778153] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.778154] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.778156] usb usb3: Product: xHCI Host Controller
[ 1.778157] usb usb3: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[ 1.778159] usb usb3: SerialNumber: 0000:00:14.0
[ 1.778247] hub 3-0:1.0: USB hub found
[ 1.778254] hub 3-0:1.0: 4 ports detected
[ 1.784866] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.792004] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.792008] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.792109] mousedev: PS/2 mouse device common for all mice
[ 1.792247] rtc_cmos 00:04: RTC can wake from S4
[ 1.792368] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.792395] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.792450] device-mapper: uevent: version 1.0.3
[ 1.792510] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.792516] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.792604] TCP: cubic registered
[ 1.792679] NET: Registered protocol family 10
[ 1.792842] NET: Registered protocol family 17
[ 1.792849] Key type dns_resolver registered
[ 1.793063] Loading compiled-in X.509 certificates
[ 1.793987] Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9'
[ 1.793999] registered taskstats version 1
[ 1.796103] Key type trusted registered
[ 1.797776] Key type encrypted registered
[ 1.799369] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.799373] IMA: No TPM chip found, activating TPM-bypass!
[ 1.799848] regulator-dummy: disabling
[ 1.799912] Magic number: 15:626:367
[ 1.799992] rtc_cmos 00:04: setting system clock to 2015-01-16 06:21:51 UTC (1421389311)
[ 1.800709] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.800711] EDD information not available.
[ 1.800740] PM: Hibernation image not present or could not be loaded.
[ 1.857846] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.857853] ACPI: Battery Slot [BAT0] (battery present)
[ 1.858671] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[ 1.858673] Write protecting the kernel read-only data: 12288k
[ 1.860488] Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
[ 1.861663] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[ 1.870305] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.874169] systemd-udevd[125]: starting version 204
[ 1.885849] wmi: Mapper loaded
[ 1.890515] [drm] Initialized drm 1.1.0 20060810
[ 1.892886] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.892897] r8169 0000:09:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.893822] ahci 0000:00:1f.2: version 3.0
[ 1.893940] ahci 0000:00:1f.2: irq 57 for MSI/MSI-X
[ 1.901298] r8169 0000:09:00.0: irq 58 for MSI/MSI-X
[ 1.901472] r8169 0000:09:00.0 eth0: RTL8106e at 0xffffc90010c82000, 38:63:bb:a6:6a:28, XID 10900800 IRQ 58
[ 1.908889] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ 1.908895] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 1.909844] scsi0 : ahci
[ 1.910897] scsi1 : ahci
[ 1.912440] scsi2 : ahci
[ 1.913434] scsi3 : ahci
[ 1.913486] ata1: SATA max UDMA/133 abar m2048@0xb561b000 port 0xb561b100 irq 57
[ 1.913489] ata2: SATA max UDMA/133 abar m2048@0xb561b000 port 0xb561b180 irq 57
[ 1.913490] ata3: DUMMY
[ 1.913492] ata4: DUMMY
[ 1.914351] [drm] Memory usable by graphics device = 2048M
[ 1.914355] checking generic (c0000000 580000) vs hw (c0000000 10000000)
[ 1.914357] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 1.914371] Console: switching to colour dummy device 80x25
[ 1.953019] i915 0000:00:02.0: irq 59 for MSI/MSI-X
[ 1.953034] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.953036] [drm] Driver supports precise vblank timestamp query.
[ 1.953154] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.031157] fbcon: inteldrmfb (fb0) is primary device
[ 2.089095] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.221455] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
[ 2.221457] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.221718] hub 1-1:1.0: USB hub found
[ 2.221797] hub 1-1:1.0: 8 ports detected
[ 2.233108] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.233122] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.234605] ata1.00: ATA-9: HGST HTS541075A9E680, JA2OA710, max UDMA/133
[ 2.234607] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.237606] ata2.00: ATAPI: hp DVDRW DU8A5SHL, ZH63, max UDMA/100
[ 2.238423] ata2.00: configured for UDMA/100
[ 2.268029] ata1.00: configured for UDMA/133
[ 2.268156] scsi 0:0:0:0: Direct-Access ATA HGST HTS541075A9 JA2O PQ: 0 ANSI: 5
[ 2.268257] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 2.268259] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.268283] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.268294] sd 0:0:0:0: [sda] Write Protect is off
[ 2.268295] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.268321] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.273187] scsi 1:0:0:0: CD-ROM hp DVDRW DU8A5SHL ZH63 PQ: 0 ANSI: 5
[ 2.282049] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.282050] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.282193] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.282251] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.331350] sda: sda1 sda2 sda3
[ 2.331737] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.433247] tsc: Refined TSC clocksource calibration: 2593.995 MHz
[ 2.493386] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 2.595674] usb 1-1.3: New USB device found, idVendor=064e, idProduct=c344
[ 2.595675] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.595677] usb 1-1.3: Product: HP Truevision HD
[ 2.595677] usb 1-1.3: Manufacturer: SuYin
[ 2.595678] usb 1-1.3: SerialNumber: HF1017-P83A-OV01-REV0102
[ 2.665479] usb 1-1.7: new full-speed USB device number 4 using ehci-pci
[ 2.761001] usb 1-1.7: New USB device found, idVendor=0a5c, idProduct=216c
[ 2.761002] usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.761003] usb 1-1.7: Product: BCM43142A0
[ 2.761004] usb 1-1.7: Manufacturer: Broadcom Corp
[ 2.761005] usb 1-1.7: SerialNumber: 38B1DBF18DDE
[ 2.801407] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x12e800, board id: 2997, fw id: 1665536
[ 2.850171] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 3.265874] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 3.433988] Switched to clocksource tsc
[ 3.725999] Console: switching to colour frame buffer device 200x56
[ 3.731004] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.731005] i915 0000:00:02.0: registered panic notifier
[ 3.731380] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 3.731699] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 3.731797] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[ 3.731802] ACPI Error: Method parse/execution failed [\_SB_.PCI0.RP05.PEGP.DD02._BCL] (Node ffff8801d60ffe38), AE_NOT_FOUND (20131115/psparse-536)
[ 3.731857] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1e/LNXVIDEO:00/input/input6
[ 3.739381] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.739711] acpi device:40: registered as cooling_device4
[ 3.739776] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
[ 3.739854] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.941569] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.291340] random: nonblocking pool is initialized
[ 13.526756] Adding 7812092k swap on /dev/sda2. Priority:-1 extents:1 across:7812092k FS
[ 13.560395] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.664705] systemd-udevd[378]: starting version 204
[ 13.733430] lp: driver loaded but no devices found
[ 13.737159] ppdev: user-space parallel port driver
[ 13.749504] Initializing HPQ6001 module
[ 13.749592] input: HP Wireless hotkeys as /devices/virtual/input/input8
[ 13.754956] hp_accel: laptop model unknown, using default axes configuration
[ 13.764747] lis3lv02d: 8 bits 3DC sensor found
[ 13.777528] mei_me 0000:00:16.0: irq 60 for MSI/MSI-X
[ 13.788083] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 13.788090] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.788094] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[ 13.788097] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.788099] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[ 13.788102] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 2 (20131115/utaddress-251)
[ 13.788106] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.788107] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 13.789322] cfg80211: Calling CRDA to update world regulatory domain
[ 13.791163] lib80211: common routines for IEEE802.11 drivers
[ 13.791166] lib80211_crypt: registered algorithm 'NULL'
[ 13.792638] wl: module license 'MIXED/Proprietary' taints kernel.
[ 13.792643] Disabling lock debugging due to kernel taint
[ 13.794168] wl: module verification failed: signature and/or required key missing - tainting kernel
[ 13.816600] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9
[ 13.827351] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[ 13.830581] lib80211_crypt: registered algorithm 'TKIP'
[ 13.855807] HDA driver get symbol successfully from i915 module
[ 13.857029] snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X
[ 13.860222] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
[ 13.882872] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 13.882933] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 13.882978] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 13.888409] SKU: Nid=0x1d sku_cfg=0x4076a12d
[ 13.888412] SKU: port_connectivity=0x1
[ 13.888414] SKU: enable_pcbeep=0x1
[ 13.888415] SKU: check_sum=0x00000006
[ 13.888416] SKU: customization=0x000000a1
[ 13.888418] SKU: external_amp=0x5
[ 13.888419] SKU: platform_type=0x1
[ 13.888420] SKU: swap=0x0
[ 13.888421] SKU: override=0x1
[ 13.888644] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 13.888645] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.888647] hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 13.888648] mono: mono_out=0x0
[ 13.888649] inputs:
[ 13.888651] Mic=0x1a
[ 13.888653] Internal Mic=0x12
[ 13.888654] realtek: No valid SSID, checking pincfg 0x4076a12d for NID 0x1d
[ 13.888656] realtek: Enabling init ASM_ID=0xa12d CODEC_ID=10ec0290
[ 13.905761] kvm: disabled by bios
[ 13.911505] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 13.911612] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 13.923259] device-mapper: multipath: version 1.6.0 loaded
[ 13.953803] wlan0: Broadcom BCM4365 802.11 Hybrid Wireless Controller 6.30.223.141 (r415941)
[ 14.035515] Linux video capture interface: v2.00
[ 14.042330] Bluetooth: Core ver 2.17
[ 14.042345] NET: Registered protocol family 31
[ 14.042347] Bluetooth: HCI device and connection manager initialized
[ 14.042353] Bluetooth: HCI socket layer initialized
[ 14.042356] Bluetooth: L2CAP socket layer initialized
[ 14.042360] Bluetooth: SCO socket layer initialized
[ 14.047449] uvcvideo: Found UVC 1.00 device HP Truevision HD (064e:c344)
[ 14.048542] usbcore: registered new interface driver btusb
[ 14.055317] input: HP Truevision HD as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input15
[ 14.055361] intel_rapl: domain uncore energy ctr 4472:4472 not working, skip
[ 14.055461] usbcore: registered new interface driver uvcvideo
[ 14.055463] USB Video Class driver (1.1.1)
[ 14.079165] input: HP WMI hotkeys as /devices/virtual/input/input16
[ 14.079391] usb 1-1.7: Direct firmware load failed with error -2
[ 14.079394] usb 1-1.7: Falling back to user helper
[ 14.106611] Bluetooth: can't load firmware, may not work correctly
[ 14.443970] cfg80211: World regulatory domain updated:
[ 14.443974] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.443976] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.443977] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.443979] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.443980] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.443981] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.505210] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 15.060982] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 15.600977] init: failsafe main process (733) killed by TERM signal
[ 15.905655] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.905659] Bluetooth: BNEP filters: protocol multicast
[ 15.905667] Bluetooth: BNEP socket layer initialized
[ 15.906290] Bluetooth: RFCOMM TTY layer initialized
[ 15.906297] Bluetooth: RFCOMM socket layer initialized
[ 15.906300] Bluetooth: RFCOMM ver 1.11
[ 16.205725] init: cups main process (870) killed by HUP signal
[ 16.205732] init: cups main process ended, respawning
[ 17.120275] r8169 0000:09:00.0 eth0: link down
[ 17.120325] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.120632] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.379150] init: samba-ad-dc main process (912) terminated with status 1
[ 18.203548] bbswitch: version 0.8
[ 18.203553] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 18.203556] bbswitch: Found discrete VGA device 0000:0a:00.0: \_SB_.PCI0.RP05.PEGP
[ 18.203564] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 18.203611] bbswitch: detected an Optimus _DSM function
[ 18.203623] pci 0000:0a:00.0: enabling device (0006 -> 0007)
[ 18.203664] bbswitch: Succesfully loaded. Discrete card 0000:0a:00.0 is on
[ 18.204871] bbswitch: disabling discrete graphics
[ 18.204878] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 18.875864] init: plymouth-upstart-bridge main process ended, respawning
[ 18.879553] init: plymouth-upstart-bridge main process (1417) terminated with status 1
[ 18.879559] init: plymouth-upstart-bridge main process ended, respawning
[ 35.543979] init: anacron main process (1153) killed by TERM signal
[ 41.130141] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 41.130155] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 41.226257] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 41.226262] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 41.327520] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 41.327524] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 41.418436] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 41.418441] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 41.514424] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 41.514431] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 41.643513] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 41.643520] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 41.734556] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 41.734568] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 41.857663] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 41.857675] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 41.971701] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 41.971709] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 42.096817] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 42.096829] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 42.166909] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 42.166922] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 42.303055] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 42.303067] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 42.388999] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 42.389011] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 42.510099] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 42.510105] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 42.605222] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 42.605234] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 42.726320] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 42.726326] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 42.827378] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 42.827390] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 42.939398] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 42.939405] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 43.052425] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 43.052431] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 43.279633] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 43.279638] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 43.384131] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 43.384141] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 43.512036] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 43.512043] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 43.686083] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 43.686096] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 43.819058] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 43.819063] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 43.932246] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 43.932260] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 44.039791] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 44.039802] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 44.162581] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 44.162591] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 44.315008] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 44.315014] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 44.403601] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 44.403613] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 44.584809] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 44.584820] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 44.680716] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 44.680726] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 44.830863] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 44.830869] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 44.931934] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 44.931940] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 45.135447] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 45.135459] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 48.230898] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 48.230911] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 48.408273] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 48.408281] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 48.842462] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 48.842467] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 48.932485] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 48.932491] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 49.333831] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 49.333845] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 49.500985] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 49.500991] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
