Salut, j'avance dans ma galère !
J'ai trouvé
ceci qui permet de définir les préférences de sorties audio utlisées, mais je n'arrive pas à l'adapter à ma configuration...
J'ai essayé d'éditer mon /etc/pulse/default.pa mais rien n'y fait...
Voici mon
pacmd list-cards
:
1 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_1b.0>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xd0440000 irq 43"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "27d8"
device.product.name = "NM10/ICH7 Family High Definition Audio Controller (STAC9221 HD Audio Codec)"
device.form_factor = "internal"
device.string = "0"
device.description = "Audio interne"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:analog-stereo: Stéréo analogique Input (priority 60, available: unknown)
input:iec958-stereo: Stéréo numérique (IEC958) Input (priority 55, available: unknown)
output:analog-stereo: Stéréo analogique Output (priority 6000, available: unknown)
output:analog-stereo+input:analog-stereo: Duplex stéréo analogique (priority 6060, available: unknown)
output:analog-stereo+input:iec958-stereo: Stéréo analogique Output + Stéréo numérique (IEC958) Input (priority 6055, available: unknown)
output:analog-surround-40: Surround analogique 4.0 Output (priority 700, available: unknown)
output:analog-surround-40+input:analog-stereo: Surround analogique 4.0 Output + Stéréo analogique Input (priority 760, available: unknown)
output:analog-surround-40+input:iec958-stereo: Surround analogique 4.0 Output + Stéréo numérique (IEC958) Input (priority 755, available: unknown)
output:iec958-stereo: Stéréo numérique (IEC958) Output (priority 5500, available: unknown)
output:iec958-stereo+input:analog-stereo: Stéréo numérique (IEC958) Output + Stéréo analogique Input (priority 5560, available: unknown)
output:iec958-stereo+input:iec958-stereo: Duplex stéréo numérique (IEC958) (priority 5555, available: unknown)
off: Éteint (priority 0, available: unknown)
active profile: <output:analog-stereo+input:analog-stereo>
sinks:
alsa_output.pci-0000_00_1b.0.analog-stereo/#0: Audio interne Stéréo analogique
sources:
alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#0: Monitor of Audio interne Stéréo analogique
alsa_input.pci-0000_00_1b.0.analog-stereo/#1: Audio interne Stéréo analogique
ports:
analog-input: Entrée analogique (priority 10000, latency offset 0 usec, available: unknown)
properties:
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Entrée-ligne (priority 8100, latency offset 0 usec, available: no)
properties:
iec958-stereo-input: Digital Input (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
properties:
analog-output: Sortie analogique (priority 9900, latency offset 0 usec, available: unknown)
properties:
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Casques analogiques (priority 9000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
properties:
J'aimerais que la sortie analogique soit par défaut et que le volume des écouteurs ne soit pas muté (c'est bizarre mais c'est la seule solution pour que le son soit potable sans aucun casque ou enceinte branchés dessus.
Edit : remplacement des balises quote par code
