Bonjour,
J'ai une clef wifi HEDEN ref CLW300USBHD branchée sur ma tour PC Ubuntu.
Je n'arrive pas à avoir accès à mon réseau wifi familial...
J'ai le cd d'installation mais ne sais pas comment installer les drivers depuis le cd sur ubuntu.
J'ai branché la clef et fait le diagnostique tel suggéré par le forum.
Merci pour votre aide.
Manu
cat/etc/lsb-release
manu@Manu-PC:~$ cat/etc/lsb-release
bash: cat/etc/lsb-release: Aucun fichier ou dossier de ce type
lsusb
Bus 001 Device 003: ID 058f:6377 Alcor Micro Corp. Multimedia Card Reader
Bus 001 Device 006: ID 0bda:818b Realtek Semiconductor Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 1a2c:2d23 China Resource Semico Co., Ltd
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
lspci
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 01)
sudo lshw -C network
*-network
description: Ethernet interface
produit: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
fabriquant: Realtek Semiconductor Co., Ltd.
identifiant matériel: 0
information bus: pci@0000:01:00.0
nom logique: eth0
version: 01
numéro de série: 00:1b:b9:d6:41:0f
taille: 10Mbit/s
capacité: 100Mbit/s
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s
ressources: irq:40 portE/S:e800(taille=256) mémoire:febff000-febfffff mémoire:febc0000-febdffff
lsmod
manu@Manu-PC:~$ lsmod
Module Size Used by
nls_utf8 12557 1
isofs 39837 1
bnep 19624 2
rfcomm 69160 0
bluetooth 391136 10 bnep,rfcomm
joydev 17381 0
hid_generic 12548 0
usbhid 52659 0
hid 106148 2 hid_generic,usbhid
gpio_ich 13476 0
snd_hda_codec_realtek 65812 1
snd_hda_intel 56531 3
snd_hda_codec 193017 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 13602 1 snd_hda_codec
coretemp 13435 0
snd_pcm 102099 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 18710 2 snd_pcm,snd_hda_intel
snd_seq_midi 13324 0
snd_seq_midi_event 14899 1 snd_seq_midi
snd_rawmidi 30144 1 snd_seq_midi
snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi
serio_raw 13462 0
i915 788212 3
video 19476 1 i915
snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi
drm_kms_helper 55071 1 i915
lpc_ich 21080 0
snd_timer 29482 2 snd_pcm,snd_seq
snd 69322 16 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
shpchp 37032 0
drm 303102 4 i915,drm_kms_helper
soundcore 12680 1 snd
i2c_algo_bit 13413 1 i915
parport_pc 32701 0
mac_hid 13205 0
ppdev 17671 0
lp 17759 0
parport 42348 3 lp,ppdev,parport_pc
usb_storage 62209 0
psmouse 106692 0
r8169 71677 0
pata_acpi 13038 0
mii 13934 1 r8169
iwconfig
eth0 no wireless extensions.
lo no wireless extensions.
ifconfig
eth0 Link encap:Ethernet HWaddr 00:1b:b9:d6:41:0f
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:65536 Metric:1
Packets reçus:2313 erreurs:0 :0 overruns:0 frame:0
TX packets:2313 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:188993 (188.9 KB) Octets transmis:188993 (188.9 KB)
sudo iwlist scan
eth0 Interface doesn't support scanning.
lo Interface doesn't support scanning.
uname -r -m
3.13.0-74-generic x86_64
sudo rfkill list
rien n'apparait !!!
nmcli connection show
COMMAND := { list | status | up | down | delete }
list [id <id> | uuid <id>]
status [id <id> | uuid <id> | path <path>]
up id <id> | uuid <id> [iface <iface>] [ap <BSSID>] [--nowait] [--timeout <timeout>]
down id <id> | uuid <id>
delete id <id> | uuid <id>
Erreur : commande « con » « show » non valide.
Modération : merci à l'avenir d'utiliser les balises code (explications ici).
