Bonsoir,
merci pour ton message, j'ai fait la manip que tu proposais mais cela n'a rien changé. Ci après le dmesg :
tem wakeup disabled by ACPI
[ 0.217682] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.217739] pci 0000:00:1f.4: reg 0x10: [mem 0xdfb32000-0xdfb320ff 64bit]
[ 0.217811] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.218060] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.218063] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.218066] pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf9fffff]
[ 0.218072] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd09fffff 64bit pref]
[ 0.218348] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
[ 0.218458] pci 0000:02:00.0: reg 0x10: [mem 0xdfa00000-0xdfa01fff 64bit]
[ 0.218812] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.225923] pci 0000:00:1c.7: PCI bridge to [bus 02]
[ 0.225928] pci 0000:00:1c.7: bridge window [mem 0xdfa00000-0xdfafffff]
[ 0.227888] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.227952] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.228012] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.228071] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.228131] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.228190] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.228249] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.228308] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.228794] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.228932] ACPI : EC: GPE = 0x50, I/O: command/status = 0x66, data = 0x62
[ 0.229034] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.229036] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.229039] vgaarb: loaded
[ 0.229040] vgaarb: bridge control possible 0000:00:02.0
[ 0.229260] SCSI subsystem initialized
[ 0.229297] libata version 3.00 loaded.
[ 0.229318] ACPI: bus type USB registered
[ 0.229332] usbcore: registered new interface driver usbfs
[ 0.229339] usbcore: registered new interface driver hub
[ 0.229353] usbcore: registered new device driver usb
[ 0.229510] PCI: Using ACPI for IRQ routing
[ 0.258277] PCI: pci_cache_line_size set to 64 bytes
[ 0.258654] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.258655] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.258656] e820: reserve RAM buffer [mem 0x824c9000-0x83ffffff]
[ 0.258657] e820: reserve RAM buffer [mem 0x851a3000-0x87ffffff]
[ 0.258659] e820: reserve RAM buffer [mem 0x8621a000-0x87ffffff]
[ 0.258660] e820: reserve RAM buffer [mem 0x87fff000-0x87ffffff]
[ 0.258661] e820: reserve RAM buffer [mem 0x172000000-0x173ffffff]
[ 0.258770] NetLabel: Initializing
[ 0.258771] NetLabel: domain hash size = 128
[ 0.258772] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.258782] NetLabel: unlabeled traffic allowed by default
[ 0.258886] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.258891] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.260931] amd_nb: Cannot enumerate AMD northbridges
[ 0.260962] clocksource: Switched to clocksource hpet
[ 0.266417] AppArmor: AppArmor Filesystem Enabled
[ 0.266469] pnp: PnP ACPI init
[ 0.266760] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.266762] system 00:00: [io 0xffff] has been reserved
[ 0.266764] system 00:00: [io 0xffff] has been reserved
[ 0.266766] system 00:00: [io 0xffff] has been reserved
[ 0.266767] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.266769] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.266772] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.266867] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.266902] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.266905] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.267017] system 00:03: [io 0x0240-0x0259] has been reserved
[ 0.267020] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.267057] pnp 00:04: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.267216] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.267218] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.267219] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.267221] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.267222] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.267224] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.267225] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.267227] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.267228] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.267230] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.267232] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.267271] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.267272] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.267274] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.267275] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.267277] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.267279] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.267281] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.267283] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.267570] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.267572] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.268661] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.268663] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.268665] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.268667] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.269564] pnp: PnP ACPI: found 9 devices
[ 0.278477] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.278506] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.278513] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.278518] pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf9fffff]
[ 0.278521] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd09fffff 64bit pref]
[ 0.278527] pci 0000:00:1c.7: PCI bridge to [bus 02]
[ 0.278532] pci 0000:00:1c.7: bridge window [mem 0xdfa00000-0xdfafffff]
[ 0.278540] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.278542] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.278543] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.278545] pci_bus 0000:00: resource 7 [mem 0x8d000000-0xdfffffff window]
[ 0.278546] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.278548] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.278549] pci_bus 0000:01: resource 1 [mem 0xdf000000-0xdf9fffff]
[ 0.278550] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd09fffff 64bit pref]
[ 0.278552] pci_bus 0000:02: resource 1 [mem 0xdfa00000-0xdfafffff]
[ 0.278581] NET: Registered protocol family 2
[ 0.278708] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.278772] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.278870] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.278892] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.278907] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.278951] NET: Registered protocol family 1
[ 0.278965] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.279801] PCI: CLS 0 bytes, default 64
[ 0.279841] Trying to unpack rootfs image as initramfs...
[ 0.875940] Freeing initrd memory: 37048K (ffff880033794000 - ffff880035bc2000)
[ 0.876017] DMAR: ACPI device "device:6a" under DMAR at fed91000 as 00:15.0
[ 0.876021] DMAR: ACPI device "device:6b" under DMAR at fed91000 as 00:15.1
[ 0.876033] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.876035] software IO TLB [mem 0x7d494000-0x81494000] (64MB) mapped at [ffff88007d494000-ffff880081493fff]
[ 0.876200] Scanning for low memory corruption every 60 seconds
[ 0.876580] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.876611] audit: initializing netlink subsys (disabled)
[ 0.876626] audit: type=2000 audit(1483386185.872:1): initialized
[ 0.877055] Initialise system trusted keyring
[ 0.877275] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.877277] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.878652] zbud: loaded
[ 0.878880] VFS: Disk quotas dquot_6.6.0
[ 0.878909] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.879145] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.879447] fuse init (API version 7.23)
[ 0.879604] Key type big_key registered
[ 0.879628] Allocating IMA MOK and blacklist keyrings.
[ 0.880594] Key type asymmetric registered
[ 0.880597] Asymmetric key parser 'x509' registered
[ 0.880631] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.880708] io scheduler noop registered
[ 0.880711] io scheduler deadline registered (default)
[ 0.880741] io scheduler cfq registered
[ 0.881453] aer 0000:00:1c.0:pcie02: service driver aer loaded
[ 0.881493] aer 0000:00:1c.7:pcie02: service driver aer loaded
[ 0.881511] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.881514] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.881523] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
[ 0.881525] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.881528] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
[ 0.881533] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.881548] pciehp 0000:00:1c.0:pcie04: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.881586] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.881590] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.881619] efifb: probing for efifb
[ 0.881633] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90000800000, using 1920k, total 1920k
[ 0.881634] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 0.881635] efifb: scrolling: redraw
[ 0.881636] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.881725] Console: switching to colour frame buffer device 100x37
[ 0.881734] fb0: EFI VGA frame buffer device
[ 0.881741] intel_idle: MWAIT substates: 0x11142120
[ 0.881742] intel_idle: v0.4.1 model 0x4E
[ 0.881743] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.882075] ACPI: AC Adapter [AC0] (off-line)
[ 0.882139] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.883352] ACPI: Lid Switch [LID]
[ 0.883384] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.883387] ACPI: Sleep Button [SLPB]
[ 0.883415] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.883417] ACPI: Power Button [PWRF]
[ 0.884293] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.884295] ACPI: Thermal Zone [THRM] (28 C)
[ 0.884372] GHES: HEST is not enabled!
[ 0.884516] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.893439] ACPI: Battery Slot [BAT0] (battery present)
[ 0.893458] Linux agpgart interface v0.103
[ 0.897716] brd: module loaded
[ 0.899669] loop: module loaded
[ 0.899875] libphy: Fixed MDIO Bus: probed
[ 0.899880] tun: Universal TUN/TAP device driver, 1.6
[ 0.899881] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.899953] PPP generic driver version 2.4.2
[ 0.900043] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.900048] ehci-pci: EHCI PCI platform driver
[ 0.900057] ehci-platform: EHCI generic platform driver
[ 0.900068] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.900072] ohci-pci: OHCI PCI platform driver
[ 0.900081] ohci-platform: OHCI generic platform driver
[ 0.900090] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.900266] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.900271] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.901381] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 0.901386] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.901480] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.901481] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.901483] usb usb1: Product: xHCI Host Controller
[ 0.901484] usb usb1: Manufacturer: Linux 4.4.0-57-generic xhci-hcd
[ 0.901485] usb usb1: SerialNumber: 0000:00:14.0
[ 0.901621] hub 1-0:1.0: USB hub found
[ 0.901642] hub 1-0:1.0: 12 ports detected
[ 0.902479] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.902482] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.902510] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.902511] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.902513] usb usb2: Product: xHCI Host Controller
[ 0.902514] usb usb2: Manufacturer: Linux 4.4.0-57-generic xhci-hcd
[ 0.902515] usb usb2: SerialNumber: 0000:00:14.0
[ 0.902641] hub 2-0:1.0: USB hub found
[ 0.902656] hub 2-0:1.0: 6 ports detected
[ 0.903160] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
[ 0.903162] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.904612] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.904785] mousedev: PS/2 mouse device common for all mice
[ 0.905249] rtc_cmos 00:01: RTC can wake from S4
[ 0.905674] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.905760] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.905769] i2c /dev entries driver
[ 0.905817] device-mapper: uevent: version 1.0.3
[ 0.905911] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.905927] Intel P-state driver initializing.
[ 0.905931] intel_pstate: HWP enabled
[ 0.906686] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.906690] EFI Variables Facility v0.08 2004-May-17
[ 0.911711] NET: Registered protocol family 10
[ 0.911963] NET: Registered protocol family 17
[ 0.911973] Key type dns_resolver registered
[ 0.912157] microcode: CPU0 sig=0x406e3, pf=0x80, revision=0x84
[ 0.912176] microcode: CPU1 sig=0x406e3, pf=0x80, revision=0x84
[ 0.912196] microcode: CPU2 sig=0x406e3, pf=0x80, revision=0x84
[ 0.912210] microcode: CPU3 sig=0x406e3, pf=0x80, revision=0x84
[ 0.912289] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.912631] registered taskstats version 1
[ 0.912648] Loading compiled-in X.509 certificates
[ 0.913382] Loaded X.509 cert 'Build time autogenerated kernel key: a2268f7e4ca1e818c997a5071614f42c2a90855b'
[ 0.913396] zswap: loaded using pool lzo/zbud
[ 0.915552] Key type trusted registered
[ 0.919484] Key type encrypted registered
[ 0.919490] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.919493] ima: No TPM chip found, activating TPM-bypass!
[ 0.919512] evm: HMAC attrs: 0x1
[ 0.920815] Magic number: 1:817:747
[ 0.921188] rtc_cmos 00:01: setting system clock to 2017-01-02 19:43:06 UTC (1483386186)
[ 0.921372] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.921373] EDD information not available.
[ 0.921460] PM: Hibernation image not present or could not be loaded.
[ 0.922461] Freeing unused kernel memory: 1484K (ffffffff81f44000 - ffffffff820b7000)
[ 0.922462] Write protecting the kernel read-only data: 14336k
[ 0.923113] Freeing unused kernel memory: 1796K (ffff88000283f000 - ffff880002a00000)
[ 0.923419] Freeing unused kernel memory: 136K (ffff880002dde000 - ffff880002e00000)
[ 0.934981] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 0.935041] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 0.935051] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 0.935064] random: systemd-udevd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[ 0.935465] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[ 0.935501] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[ 0.935681] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[ 0.935717] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[ 0.935763] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[ 0.935795] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[ 0.944720] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.955387] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 0.979884] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.984905] wmi: Mapper loaded
[ 0.989433] ahci 0000:00:17.0: version 3.0
[ 0.989648] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x5 impl SATA mode
[ 0.989651] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.990131] scsi host0: ahci
[ 0.990281] scsi host1: ahci
[ 0.990436] scsi host2: ahci
[ 0.990513] ata1: SATA max UDMA/133 abar m2048@0xdfb33000 port 0xdfb33100 irq 125
[ 0.990514] ata2: DUMMY
[ 0.990517] ata3: SATA max UDMA/133 abar m2048@0xdfb33000 port 0xdfb33200 irq 125
[ 0.990635] [drm] Initialized drm 1.1.0 20060810
[ 1.015100] [drm] Memory usable by graphics device = 4096M
[ 1.015109] checking generic (c0000000 1e0000) vs hw (c0000000 10000000)
[ 1.015110] fb: switching to inteldrmfb from EFI VGA
[ 1.015129] Console: switching to colour dummy device 80x25
[ 1.015248] [drm] Replacing VGA console driver
[ 1.021176] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.021179] [drm] Driver supports precise vblank timestamp query.
[ 1.030017] [drm] Finished loading i915/skl_dmc_ver1.bin (v1.26)
[ 1.034864] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.047831] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.050252] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 1.050421] [drm] Initialized i915_bpo 1.6.0 20160425 for 0000:00:02.0 on minor 0
[ 1.269314] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[ 1.302668] fbcon: inteldrmfb (fb0) is primary device
[ 1.302756] Console: switching to colour frame buffer device 240x67
[ 1.302778] i915_bpo 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.309293] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.313251] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.315101] ata3.00: ATA-9: SanDisk SD8SNAT128G1002, Z2317002, max UDMA/133
[ 1.315104] ata3.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.323527] ata3.00: configured for UDMA/133
[ 1.345092] ata1.00: ATA-8: ST500LT012-1DG142, 0003SDM1, max UDMA/133
[ 1.345095] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.457893] usb 1-2: New USB device found, idVendor=1d57, idProduct=fa60
[ 1.457896] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.457897] usb 1-2: Product: 2.4G Receiver
[ 1.457898] usb 1-2: Manufacturer: Compx
[ 1.458147] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.458171] usb 1-2: ep 0x83 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.464347] usbcore: registered new interface driver usbhid
[ 1.464368] usbhid: USB HID core driver
[ 1.466018] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1D57:FA60.0001/input/input5
[ 1.468364] ata1.00: configured for UDMA/133
[ 1.468762] scsi 0:0:0:0: Direct-Access ATA ST500LT012-1DG14 SDM1 PQ: 0 ANSI: 5
[ 1.469089] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.469092] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.469105] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.469219] sd 0:0:0:0: [sda] Write Protect is off
[ 1.469221] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.469340] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.469386] scsi 2:0:0:0: Direct-Access ATA SanDisk SD8SNAT1 7002 PQ: 0 ANSI: 5
[ 1.469626] sd 2:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.469639] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.469819] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.469822] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.469854] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.471477] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6
[ 1.472682] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.521605] hid-generic 0003:1D57:FA60.0001: input,hidraw0: USB HID v1.00 Keyboard [Compx 2.4G Receiver] on usb-0000:00:14.0-2/input0
[ 1.521771] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:1D57:FA60.0002/input/input6
[ 1.522169] hid-generic 0003:1D57:FA60.0002: input,hidraw1: USB HID v1.00 Mouse [Compx 2.4G Receiver] on usb-0000:00:14.0-2/input1
[ 1.522883] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:1D57:FA60.0003/input/input7
[ 1.539839] sda: sda1
[ 1.540730] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.577264] hid-generic 0003:1D57:FA60.0003: input,hidraw2: USB HID v1.00 Device [Compx 2.4G Receiver] on usb-0000:00:14.0-2/input2
[ 1.625282] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[ 1.861863] usb 1-6: New USB device found, idVendor=04f2, idProduct=b57a
[ 1.861866] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.861867] usb 1-6: Product: USB2.0 HD UVC WebCam
[ 1.861868] usb 1-6: Manufacturer: Chicony Electronics Co.,Ltd.
[ 1.861869] usb 1-6: SerialNumber: 0x0001
[ 1.873381] tsc: Refined TSC clocksource calibration: 2399.999 MHz
[ 1.873385] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2298364cab5, max_idle_ns: 440795214892 ns
[ 2.023729] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 2.033173] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[ 2.219797] usb 1-8: New USB device found, idVendor=8087, idProduct=0a2a
[ 2.219800] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.781558] [drm] RC6 on
[ 2.873613] clocksource: Switched to clocksource tsc
[ 3.396803] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 3.396902] systemd[1]: Detected architecture x86-64.
[ 3.397088] systemd[1]: Set hostname to <philippe-UX310UA>.
[ 3.518433] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.518451] systemd[1]: Reached target Remote File Systems (Pre).
[ 3.518468] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.518486] systemd[1]: Listening on udev Kernel Socket.
[ 3.518506] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.518639] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.518681] systemd[1]: Listening on Journal Audit Socket.
[ 3.518689] systemd[1]: Reached target Encrypted Volumes.
[ 3.518751] systemd[1]: Created slice System Slice.
[ 3.518766] systemd[1]: Reached target Remote File Systems.
[ 3.518789] systemd[1]: Listening on udev Control Socket.
[ 3.518810] systemd[1]: Listening on Journal Socket.
[ 3.541425] systemd[1]: Mounting Huge Pages File System...
[ 3.542111] systemd[1]: Starting Set console keymap...
[ 3.542676] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.543114] systemd[1]: Mounting Debug File System...
[ 3.543576] systemd[1]: Starting Uncomplicated firewall...
[ 3.547906] systemd[1]: Starting Load Kernel Modules...
[ 3.548301] systemd[1]: Starting Nameserver information manager...
[ 3.548794] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.548869] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.549020] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.549461] systemd[1]: Started Read required files in advance.
[ 3.554096] systemd[1]: Created slice User and Session Slice.
[ 3.554115] systemd[1]: Reached target Slices.
[ 3.554129] systemd[1]: Reached target User and Group Name Lookups.
[ 3.554169] systemd[1]: Listening on Syslog Socket.
[ 3.554659] systemd[1]: Starting Journal Service...
[ 3.555732] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.555786] systemd[1]: Mounted Debug File System.
[ 3.555816] systemd[1]: Mounted Huge Pages File System.
[ 3.556047] systemd[1]: Started Uncomplicated firewall.
[ 3.556565] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 3.560879] systemd[1]: Started Nameserver information manager.
[ 3.575498] lp: driver loaded but no devices found
[ 3.579296] ppdev: user-space parallel port driver
[ 3.584328] systemd[1]: Started Load Kernel Modules.
[ 3.613353] systemd[1]: Starting Apply Kernel Variables...
[ 3.613941] systemd[1]: Mounting FUSE Control File System...
[ 3.614463] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.614648] systemd[1]: Started Journal Service.
[ 3.616283] random: nonblocking pool is initialized
[ 3.852021] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
[ 3.870298] systemd-journald[297]: Received request to flush runtime journal from PID 1
[ 3.932665] tpm_crb MSFT0101:00: can't request region for resource [mem 0xfed40080-0xfed40fff]
[ 3.932672] tpm_crb: probe of MSFT0101:00 failed with error -16
[ 3.962664] Bluetooth: Core ver 2.21
[ 3.962679] NET: Registered protocol family 31
[ 3.962680] Bluetooth: HCI device and connection manager initialized
[ 3.962683] Bluetooth: HCI socket layer initialized
[ 3.962685] Bluetooth: L2CAP socket layer initialized
[ 3.962689] Bluetooth: SCO socket layer initialized
[ 3.976874] Bluetooth: HCI UART driver ver 2.3
[ 3.976877] Bluetooth: HCI UART protocol H4 registered
[ 3.976879] Bluetooth: HCI UART protocol BCSP registered
[ 3.976880] Bluetooth: HCI UART protocol LL registered
[ 3.976881] Bluetooth: HCI UART protocol ATH3K registered
[ 3.976882] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 3.976908] Bluetooth: HCI UART protocol Intel registered
[ 3.976919] Bluetooth: HCI UART protocol BCM registered
[ 3.976920] Bluetooth: HCI UART protocol QCA registered
[ 3.977694] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 3.989848] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 4.003013] usbcore: registered new interface driver btusb
[ 4.005460] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 4.005733] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 4.021501] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 4.025225] Bluetooth: hci0: read Intel version: 370810011003110e23
[ 4.025228] Bluetooth: hci0: Intel device is already patched. patch num: 23
[ 4.025515] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.033945] media: Linux media interface: v0.10
[ 4.048032] Linux video capture interface: v2.00
[ 4.073135] AVX2 version of gcm_enc/dec engaged.
[ 4.073138] AES CTR mode by8 optimization enabled
[ 4.083979] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b57a)
[ 4.086798] Intel(R) Wireless WiFi driver for Linux
[ 4.086800] Copyright(c) 2003- 2015 Intel Corporation
[ 4.088721] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input8
[ 4.088789] usbcore: registered new interface driver uvcvideo
[ 4.088792] USB Video Class driver (1.1.1)
[ 4.099813] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-19.ucode failed with error -2
[ 4.101191] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-18.ucode failed with error -2
[ 4.102119] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915_bpo])
[ 4.118513] iwlwifi 0000:02:00.0: loaded firmware version 17.352738.0 op_mode iwlmvm
[ 4.161778] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[ 4.162111] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 4.162551] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 4.183090] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 4.183094] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.183096] snd_hda_codec_generic hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 4.183098] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
[ 4.183100] snd_hda_codec_generic hdaudioC0D0: inputs:
[ 4.183102] snd_hda_codec_generic hdaudioC0D0: Internal Mic=0x1a
[ 4.183104] snd_hda_codec_generic hdaudioC0D0: Mic=0x19
[ 4.189365] intel_rapl: Found RAPL domain package
[ 4.189369] intel_rapl: Found RAPL domain core
[ 4.189373] intel_rapl: Found RAPL domain uncore
[ 4.189375] intel_rapl: Found RAPL domain dram
[ 4.193965] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 4.194063] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 4.194133] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 4.194194] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 4.194245] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 4.238717] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 4.312281] Adding 4055036k swap on /dev/sdb6. Priority:-1 extents:1 across:4055036k SSFS
[ 4.363406] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 4.381355] cfg80211: World regulatory domain updated:
[ 4.381358] cfg80211: DFS Master region: unset
[ 4.381359] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4.381361] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.381362] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.381363] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.381365] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 4.381366] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 4.381367] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 4.381368] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.381369] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 4.427792] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.496072] audit: type=1400 audit(1483386190.068:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=865 comm="apparmor_parser"
[ 4.496080] audit: type=1400 audit(1483386190.068:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=865 comm="apparmor_parser"
[ 4.499597] audit: type=1400 audit(1483386190.072:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=863 comm="apparmor_parser"
[ 4.499604] audit: type=1400 audit(1483386190.072:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=863 comm="apparmor_parser"
[ 4.499608] audit: type=1400 audit(1483386190.072:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=863 comm="apparmor_parser"
[ 4.499612] audit: type=1400 audit(1483386190.072:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=863 comm="apparmor_parser"
[ 4.500214] audit: type=1400 audit(1483386190.072:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=867 comm="apparmor_parser"
[ 4.501333] audit: type=1400 audit(1483386190.076:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=869 comm="apparmor_parser"
[ 4.503757] audit: type=1400 audit(1483386190.076:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=868 comm="apparmor_parser"
[ 4.575431] hid-multitouch 0018:04F3:3022.0004: Ignoring the extra HID_DG_INPUTMODE
[ 4.575483] input: ELAN1200:00 04F3:3022 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-ELAN1200:00/0018:04F3:3022.0004/input/input14
[ 4.575675] hid-multitouch 0018:04F3:3022.0004: input,hidraw3: I2C HID v1.00 Mouse [ELAN1200:00 04F3:3022] on i2c-ELAN1200:00
[ 5.418075] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.418078] Bluetooth: BNEP filters: protocol multicast
[ 5.418083] Bluetooth: BNEP socket layer initialized
[ 5.673468] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5.674299] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 5.675050] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 5.737082] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 5.738040] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 5.769375] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5.875641] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 7.785916] Bluetooth: RFCOMM TTY layer initialized
[ 7.785923] Bluetooth: RFCOMM socket layer initialized
[ 7.785928] Bluetooth: RFCOMM ver 1.11
[ 9.115169] audit_printk_skb: 45 callbacks suppressed
[ 9.115173] audit: type=1400 audit(1483386194.688:26): apparmor="DENIED" operation="exec" profile="/usr/share/hplip/systray.py" name="/usr/bin/curl" pid=1729 comm="hp-upgrade" requested_mask="x" denied_mask="x" fsuid=1000 ouid=0
[ 9.247754] audit: type=1400 audit(1483386194.820:27): apparmor="DENIED" operation="exec" profile="/usr/share/hplip/systray.py" name="/bin/ping" pid=1739 comm="hp-upgrade" requested_mask="x" denied_mask="x" fsuid=1000 ouid=0
[ 9.280885] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 12.949295] xembedsniproxy[1508]: segfault at 2 ip 000000000040f435 sp 00007ffe51cbafb0 error 4 in xembedsniproxy[400000+16000]
[ 39.053179] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 55.802982] wlp2s0: authenticate with 24:95:04:c1:a8:9c
[ 55.809165] wlp2s0: send auth to 24:95:04:c1:a8:9c (try 1/3)
[ 55.811094] wlp2s0: authenticated
[ 55.815216] wlp2s0: associate with 24:95:04:c1:a8:9c (try 1/3)
[ 55.819000] wlp2s0: RX AssocResp from 24:95:04:c1:a8:9c (capab=0x411 status=0 aid=3)
[ 55.820534] wlp2s0: associated
[ 55.820574] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
philippe@philippe-UX310UA:~$ dmesg | -500
-500 : commande introuvable
philippe@philippe-UX310UA:~$ dmesg tail | -500
-500 : commande introuvable
philippe@philippe-UX310UA:~$ dmesg |tail -500
[ 0.217682] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.217739] pci 0000:00:1f.4: reg 0x10: [mem 0xdfb32000-0xdfb320ff 64bit]
[ 0.217811] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.218060] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.218063] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.218066] pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf9fffff]
[ 0.218072] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd09fffff 64bit pref]
[ 0.218348] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
[ 0.218458] pci 0000:02:00.0: reg 0x10: [mem 0xdfa00000-0xdfa01fff 64bit]
[ 0.218812] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.225923] pci 0000:00:1c.7: PCI bridge to [bus 02]
[ 0.225928] pci 0000:00:1c.7: bridge window [mem 0xdfa00000-0xdfafffff]
[ 0.227888] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.227952] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.228012] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.228071] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.228131] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.228190] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.228249] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.228308] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.228794] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.228932] ACPI : EC: GPE = 0x50, I/O: command/status = 0x66, data = 0x62
[ 0.229034] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.229036] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.229039] vgaarb: loaded
[ 0.229040] vgaarb: bridge control possible 0000:00:02.0
[ 0.229260] SCSI subsystem initialized
[ 0.229297] libata version 3.00 loaded.
[ 0.229318] ACPI: bus type USB registered
[ 0.229332] usbcore: registered new interface driver usbfs
[ 0.229339] usbcore: registered new interface driver hub
[ 0.229353] usbcore: registered new device driver usb
[ 0.229510] PCI: Using ACPI for IRQ routing
[ 0.258277] PCI: pci_cache_line_size set to 64 bytes
[ 0.258654] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.258655] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.258656] e820: reserve RAM buffer [mem 0x824c9000-0x83ffffff]
[ 0.258657] e820: reserve RAM buffer [mem 0x851a3000-0x87ffffff]
[ 0.258659] e820: reserve RAM buffer [mem 0x8621a000-0x87ffffff]
[ 0.258660] e820: reserve RAM buffer [mem 0x87fff000-0x87ffffff]
[ 0.258661] e820: reserve RAM buffer [mem 0x172000000-0x173ffffff]
[ 0.258770] NetLabel: Initializing
[ 0.258771] NetLabel: domain hash size = 128
[ 0.258772] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.258782] NetLabel: unlabeled traffic allowed by default
[ 0.258886] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.258891] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.260931] amd_nb: Cannot enumerate AMD northbridges
[ 0.260962] clocksource: Switched to clocksource hpet
[ 0.266417] AppArmor: AppArmor Filesystem Enabled
[ 0.266469] pnp: PnP ACPI init
[ 0.266760] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.266762] system 00:00: [io 0xffff] has been reserved
[ 0.266764] system 00:00: [io 0xffff] has been reserved
[ 0.266766] system 00:00: [io 0xffff] has been reserved
[ 0.266767] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.266769] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.266772] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.266867] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.266902] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.266905] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.267017] system 00:03: [io 0x0240-0x0259] has been reserved
[ 0.267020] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.267057] pnp 00:04: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.267216] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.267218] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.267219] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.267221] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.267222] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.267224] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.267225] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.267227] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.267228] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.267230] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.267232] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.267271] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.267272] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.267274] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.267275] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.267277] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.267279] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.267281] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.267283] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.267570] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.267572] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.268661] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.268663] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.268665] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.268667] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.269564] pnp: PnP ACPI: found 9 devices
[ 0.278477] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.278506] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.278513] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.278518] pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf9fffff]
[ 0.278521] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd09fffff 64bit pref]
[ 0.278527] pci 0000:00:1c.7: PCI bridge to [bus 02]
[ 0.278532] pci 0000:00:1c.7: bridge window [mem 0xdfa00000-0xdfafffff]
[ 0.278540] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.278542] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.278543] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.278545] pci_bus 0000:00: resource 7 [mem 0x8d000000-0xdfffffff window]
[ 0.278546] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.278548] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.278549] pci_bus 0000:01: resource 1 [mem 0xdf000000-0xdf9fffff]
[ 0.278550] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd09fffff 64bit pref]
[ 0.278552] pci_bus 0000:02: resource 1 [mem 0xdfa00000-0xdfafffff]
[ 0.278581] NET: Registered protocol family 2
[ 0.278708] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.278772] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.278870] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.278892] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.278907] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.278951] NET: Registered protocol family 1
[ 0.278965] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.279801] PCI: CLS 0 bytes, default 64
[ 0.279841] Trying to unpack rootfs image as initramfs...
[ 0.875940] Freeing initrd memory: 37048K (ffff880033794000 - ffff880035bc2000)
[ 0.876017] DMAR: ACPI device "device:6a" under DMAR at fed91000 as 00:15.0
[ 0.876021] DMAR: ACPI device "device:6b" under DMAR at fed91000 as 00:15.1
[ 0.876033] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.876035] software IO TLB [mem 0x7d494000-0x81494000] (64MB) mapped at [ffff88007d494000-ffff880081493fff]
[ 0.876200] Scanning for low memory corruption every 60 seconds
[ 0.876580] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.876611] audit: initializing netlink subsys (disabled)
[ 0.876626] audit: type=2000 audit(1483386185.872:1): initialized
[ 0.877055] Initialise system trusted keyring
[ 0.877275] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.877277] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.878652] zbud: loaded
[ 0.878880] VFS: Disk quotas dquot_6.6.0
[ 0.878909] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.879145] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.879447] fuse init (API version 7.23)
[ 0.879604] Key type big_key registered
[ 0.879628] Allocating IMA MOK and blacklist keyrings.
[ 0.880594] Key type asymmetric registered
[ 0.880597] Asymmetric key parser 'x509' registered
[ 0.880631] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.880708] io scheduler noop registered
[ 0.880711] io scheduler deadline registered (default)
[ 0.880741] io scheduler cfq registered
[ 0.881453] aer 0000:00:1c.0:pcie02: service driver aer loaded
[ 0.881493] aer 0000:00:1c.7:pcie02: service driver aer loaded
[ 0.881511] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.881514] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.881523] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
[ 0.881525] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.881528] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
[ 0.881533] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.881548] pciehp 0000:00:1c.0:pcie04: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.881586] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.881590] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.881619] efifb: probing for efifb
[ 0.881633] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90000800000, using 1920k, total 1920k
[ 0.881634] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 0.881635] efifb: scrolling: redraw
[ 0.881636] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.881725] Console: switching to colour frame buffer device 100x37
[ 0.881734] fb0: EFI VGA frame buffer device
[ 0.881741] intel_idle: MWAIT substates: 0x11142120
[ 0.881742] intel_idle: v0.4.1 model 0x4E
[ 0.881743] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.882075] ACPI: AC Adapter [AC0] (off-line)
[ 0.882139] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.883352] ACPI: Lid Switch [LID]
[ 0.883384] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.883387] ACPI: Sleep Button [SLPB]
[ 0.883415] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.883417] ACPI: Power Button [PWRF]
[ 0.884293] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.884295] ACPI: Thermal Zone [THRM] (28 C)
[ 0.884372] GHES: HEST is not enabled!
[ 0.884516] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.893439] ACPI: Battery Slot [BAT0] (battery present)
[ 0.893458] Linux agpgart interface v0.103
[ 0.897716] brd: module loaded
[ 0.899669] loop: module loaded
[ 0.899875] libphy: Fixed MDIO Bus: probed
[ 0.899880] tun: Universal TUN/TAP device driver, 1.6
[ 0.899881] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.899953] PPP generic driver version 2.4.2
[ 0.900043] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.900048] ehci-pci: EHCI PCI platform driver
[ 0.900057] ehci-platform: EHCI generic platform driver
[ 0.900068] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.900072] ohci-pci: OHCI PCI platform driver
[ 0.900081] ohci-platform: OHCI generic platform driver
[ 0.900090] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.900266] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.900271] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.901381] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 0.901386] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.901480] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.901481] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.901483] usb usb1: Product: xHCI Host Controller
[ 0.901484] usb usb1: Manufacturer: Linux 4.4.0-57-generic xhci-hcd
[ 0.901485] usb usb1: SerialNumber: 0000:00:14.0
[ 0.901621] hub 1-0:1.0: USB hub found
[ 0.901642] hub 1-0:1.0: 12 ports detected
[ 0.902479] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.902482] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.902510] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.902511] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.902513] usb usb2: Product: xHCI Host Controller
[ 0.902514] usb usb2: Manufacturer: Linux 4.4.0-57-generic xhci-hcd
[ 0.902515] usb usb2: SerialNumber: 0000:00:14.0
[ 0.902641] hub 2-0:1.0: USB hub found
[ 0.902656] hub 2-0:1.0: 6 ports detected
[ 0.903160] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
[ 0.903162] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.904612] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.904785] mousedev: PS/2 mouse device common for all mice
[ 0.905249] rtc_cmos 00:01: RTC can wake from S4
[ 0.905674] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.905760] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.905769] i2c /dev entries driver
[ 0.905817] device-mapper: uevent: version 1.0.3
[ 0.905911] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.905927] Intel P-state driver initializing.
[ 0.905931] intel_pstate: HWP enabled
[ 0.906686] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.906690] EFI Variables Facility v0.08 2004-May-17
[ 0.911711] NET: Registered protocol family 10
[ 0.911963] NET: Registered protocol family 17
[ 0.911973] Key type dns_resolver registered
[ 0.912157] microcode: CPU0 sig=0x406e3, pf=0x80, revision=0x84
[ 0.912176] microcode: CPU1 sig=0x406e3, pf=0x80, revision=0x84
[ 0.912196] microcode: CPU2 sig=0x406e3, pf=0x80, revision=0x84
[ 0.912210] microcode: CPU3 sig=0x406e3, pf=0x80, revision=0x84
[ 0.912289] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.912631] registered taskstats version 1
[ 0.912648] Loading compiled-in X.509 certificates
[ 0.913382] Loaded X.509 cert 'Build time autogenerated kernel key: a2268f7e4ca1e818c997a5071614f42c2a90855b'
[ 0.913396] zswap: loaded using pool lzo/zbud
[ 0.915552] Key type trusted registered
[ 0.919484] Key type encrypted registered
[ 0.919490] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.919493] ima: No TPM chip found, activating TPM-bypass!
[ 0.919512] evm: HMAC attrs: 0x1
[ 0.920815] Magic number: 1:817:747
[ 0.921188] rtc_cmos 00:01: setting system clock to 2017-01-02 19:43:06 UTC (1483386186)
[ 0.921372] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.921373] EDD information not available.
[ 0.921460] PM: Hibernation image not present or could not be loaded.
[ 0.922461] Freeing unused kernel memory: 1484K (ffffffff81f44000 - ffffffff820b7000)
[ 0.922462] Write protecting the kernel read-only data: 14336k
[ 0.923113] Freeing unused kernel memory: 1796K (ffff88000283f000 - ffff880002a00000)
[ 0.923419] Freeing unused kernel memory: 136K (ffff880002dde000 - ffff880002e00000)
[ 0.934981] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 0.935041] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 0.935051] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 0.935064] random: systemd-udevd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[ 0.935465] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[ 0.935501] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[ 0.935681] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[ 0.935717] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[ 0.935763] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[ 0.935795] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[ 0.944720] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.955387] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 0.979884] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.984905] wmi: Mapper loaded
[ 0.989433] ahci 0000:00:17.0: version 3.0
[ 0.989648] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x5 impl SATA mode
[ 0.989651] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.990131] scsi host0: ahci
[ 0.990281] scsi host1: ahci
[ 0.990436] scsi host2: ahci
[ 0.990513] ata1: SATA max UDMA/133 abar m2048@0xdfb33000 port 0xdfb33100 irq 125
[ 0.990514] ata2: DUMMY
[ 0.990517] ata3: SATA max UDMA/133 abar m2048@0xdfb33000 port 0xdfb33200 irq 125
[ 0.990635] [drm] Initialized drm 1.1.0 20060810
[ 1.015100] [drm] Memory usable by graphics device = 4096M
[ 1.015109] checking generic (c0000000 1e0000) vs hw (c0000000 10000000)
[ 1.015110] fb: switching to inteldrmfb from EFI VGA
[ 1.015129] Console: switching to colour dummy device 80x25
[ 1.015248] [drm] Replacing VGA console driver
[ 1.021176] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.021179] [drm] Driver supports precise vblank timestamp query.
[ 1.030017] [drm] Finished loading i915/skl_dmc_ver1.bin (v1.26)
[ 1.034864] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.047831] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.050252] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 1.050421] [drm] Initialized i915_bpo 1.6.0 20160425 for 0000:00:02.0 on minor 0
[ 1.269314] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[ 1.302668] fbcon: inteldrmfb (fb0) is primary device
[ 1.302756] Console: switching to colour frame buffer device 240x67
[ 1.302778] i915_bpo 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.309293] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.313251] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.315101] ata3.00: ATA-9: SanDisk SD8SNAT128G1002, Z2317002, max UDMA/133
[ 1.315104] ata3.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.323527] ata3.00: configured for UDMA/133
[ 1.345092] ata1.00: ATA-8: ST500LT012-1DG142, 0003SDM1, max UDMA/133
[ 1.345095] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.457893] usb 1-2: New USB device found, idVendor=1d57, idProduct=fa60
[ 1.457896] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.457897] usb 1-2: Product: 2.4G Receiver
[ 1.457898] usb 1-2: Manufacturer: Compx
[ 1.458147] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.458171] usb 1-2: ep 0x83 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.464347] usbcore: registered new interface driver usbhid
[ 1.464368] usbhid: USB HID core driver
[ 1.466018] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1D57:FA60.0001/input/input5
[ 1.468364] ata1.00: configured for UDMA/133
[ 1.468762] scsi 0:0:0:0: Direct-Access ATA ST500LT012-1DG14 SDM1 PQ: 0 ANSI: 5
[ 1.469089] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.469092] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.469105] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.469219] sd 0:0:0:0: [sda] Write Protect is off
[ 1.469221] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.469340] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.469386] scsi 2:0:0:0: Direct-Access ATA SanDisk SD8SNAT1 7002 PQ: 0 ANSI: 5
[ 1.469626] sd 2:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.469639] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.469819] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.469822] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.469854] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.471477] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6
[ 1.472682] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.521605] hid-generic 0003:1D57:FA60.0001: input,hidraw0: USB HID v1.00 Keyboard [Compx 2.4G Receiver] on usb-0000:00:14.0-2/input0
[ 1.521771] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:1D57:FA60.0002/input/input6
[ 1.522169] hid-generic 0003:1D57:FA60.0002: input,hidraw1: USB HID v1.00 Mouse [Compx 2.4G Receiver] on usb-0000:00:14.0-2/input1
[ 1.522883] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:1D57:FA60.0003/input/input7
[ 1.539839] sda: sda1
[ 1.540730] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.577264] hid-generic 0003:1D57:FA60.0003: input,hidraw2: USB HID v1.00 Device [Compx 2.4G Receiver] on usb-0000:00:14.0-2/input2
[ 1.625282] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[ 1.861863] usb 1-6: New USB device found, idVendor=04f2, idProduct=b57a
[ 1.861866] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.861867] usb 1-6: Product: USB2.0 HD UVC WebCam
[ 1.861868] usb 1-6: Manufacturer: Chicony Electronics Co.,Ltd.
[ 1.861869] usb 1-6: SerialNumber: 0x0001
[ 1.873381] tsc: Refined TSC clocksource calibration: 2399.999 MHz
[ 1.873385] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2298364cab5, max_idle_ns: 440795214892 ns
[ 2.023729] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 2.033173] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[ 2.219797] usb 1-8: New USB device found, idVendor=8087, idProduct=0a2a
[ 2.219800] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.781558] [drm] RC6 on
[ 2.873613] clocksource: Switched to clocksource tsc
[ 3.396803] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 3.396902] systemd[1]: Detected architecture x86-64.
[ 3.397088] systemd[1]: Set hostname to <philippe-UX310UA>.
[ 3.518433] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.518451] systemd[1]: Reached target Remote File Systems (Pre).
[ 3.518468] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.518486] systemd[1]: Listening on udev Kernel Socket.
[ 3.518506] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.518639] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.518681] systemd[1]: Listening on Journal Audit Socket.
[ 3.518689] systemd[1]: Reached target Encrypted Volumes.
[ 3.518751] systemd[1]: Created slice System Slice.
[ 3.518766] systemd[1]: Reached target Remote File Systems.
[ 3.518789] systemd[1]: Listening on udev Control Socket.
[ 3.518810] systemd[1]: Listening on Journal Socket.
[ 3.541425] systemd[1]: Mounting Huge Pages File System...
[ 3.542111] systemd[1]: Starting Set console keymap...
[ 3.542676] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.543114] systemd[1]: Mounting Debug File System...
[ 3.543576] systemd[1]: Starting Uncomplicated firewall...
[ 3.547906] systemd[1]: Starting Load Kernel Modules...
[ 3.548301] systemd[1]: Starting Nameserver information manager...
[ 3.548794] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.548869] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.549020] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.549461] systemd[1]: Started Read required files in advance.
[ 3.554096] systemd[1]: Created slice User and Session Slice.
[ 3.554115] systemd[1]: Reached target Slices.
[ 3.554129] systemd[1]: Reached target User and Group Name Lookups.
[ 3.554169] systemd[1]: Listening on Syslog Socket.
[ 3.554659] systemd[1]: Starting Journal Service...
[ 3.555732] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.555786] systemd[1]: Mounted Debug File System.
[ 3.555816] systemd[1]: Mounted Huge Pages File System.
[ 3.556047] systemd[1]: Started Uncomplicated firewall.
[ 3.556565] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 3.560879] systemd[1]: Started Nameserver information manager.
[ 3.575498] lp: driver loaded but no devices found
[ 3.579296] ppdev: user-space parallel port driver
[ 3.584328] systemd[1]: Started Load Kernel Modules.
[ 3.613353] systemd[1]: Starting Apply Kernel Variables...
[ 3.613941] systemd[1]: Mounting FUSE Control File System...
[ 3.614463] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.614648] systemd[1]: Started Journal Service.
[ 3.616283] random: nonblocking pool is initialized
[ 3.852021] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
[ 3.870298] systemd-journald[297]: Received request to flush runtime journal from PID 1
[ 3.932665] tpm_crb MSFT0101:00: can't request region for resource [mem 0xfed40080-0xfed40fff]
[ 3.932672] tpm_crb: probe of MSFT0101:00 failed with error -16
[ 3.962664] Bluetooth: Core ver 2.21
[ 3.962679] NET: Registered protocol family 31
[ 3.962680] Bluetooth: HCI device and connection manager initialized
[ 3.962683] Bluetooth: HCI socket layer initialized
[ 3.962685] Bluetooth: L2CAP socket layer initialized
[ 3.962689] Bluetooth: SCO socket layer initialized
[ 3.976874] Bluetooth: HCI UART driver ver 2.3
[ 3.976877] Bluetooth: HCI UART protocol H4 registered
[ 3.976879] Bluetooth: HCI UART protocol BCSP registered
[ 3.976880] Bluetooth: HCI UART protocol LL registered
[ 3.976881] Bluetooth: HCI UART protocol ATH3K registered
[ 3.976882] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 3.976908] Bluetooth: HCI UART protocol Intel registered
[ 3.976919] Bluetooth: HCI UART protocol BCM registered
[ 3.976920] Bluetooth: HCI UART protocol QCA registered
[ 3.977694] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 3.989848] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 4.003013] usbcore: registered new interface driver btusb
[ 4.005460] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 4.005733] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 4.021501] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 4.025225] Bluetooth: hci0: read Intel version: 370810011003110e23
[ 4.025228] Bluetooth: hci0: Intel device is already patched. patch num: 23
[ 4.025515] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.033945] media: Linux media interface: v0.10
[ 4.048032] Linux video capture interface: v2.00
[ 4.073135] AVX2 version of gcm_enc/dec engaged.
[ 4.073138] AES CTR mode by8 optimization enabled
[ 4.083979] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b57a)
[ 4.086798] Intel(R) Wireless WiFi driver for Linux
[ 4.086800] Copyright(c) 2003- 2015 Intel Corporation
[ 4.088721] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input8
[ 4.088789] usbcore: registered new interface driver uvcvideo
[ 4.088792] USB Video Class driver (1.1.1)
[ 4.099813] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-19.ucode failed with error -2
[ 4.101191] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-18.ucode failed with error -2
[ 4.102119] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915_bpo])
[ 4.118513] iwlwifi 0000:02:00.0: loaded firmware version 17.352738.0 op_mode iwlmvm
[ 4.161778] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[ 4.162111] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 4.162551] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 4.183090] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 4.183094] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.183096] snd_hda_codec_generic hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 4.183098] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
[ 4.183100] snd_hda_codec_generic hdaudioC0D0: inputs:
[ 4.183102] snd_hda_codec_generic hdaudioC0D0: Internal Mic=0x1a
[ 4.183104] snd_hda_codec_generic hdaudioC0D0: Mic=0x19
[ 4.189365] intel_rapl: Found RAPL domain package
[ 4.189369] intel_rapl: Found RAPL domain core
[ 4.189373] intel_rapl: Found RAPL domain uncore
[ 4.189375] intel_rapl: Found RAPL domain dram
[ 4.193965] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 4.194063] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 4.194133] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 4.194194] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 4.194245] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 4.238717] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 4.312281] Adding 4055036k swap on /dev/sdb6. Priority:-1 extents:1 across:4055036k SSFS
[ 4.363406] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 4.381355] cfg80211: World regulatory domain updated:
[ 4.381358] cfg80211: DFS Master region: unset
[ 4.381359] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4.381361] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.381362] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.381363] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.381365] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 4.381366] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 4.381367] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 4.381368] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.381369] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 4.427792] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.496072] audit: type=1400 audit(1483386190.068:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=865 comm="apparmor_parser"
[ 4.496080] audit: type=1400 audit(1483386190.068:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=865 comm="apparmor_parser"
[ 4.499597] audit: type=1400 audit(1483386190.072:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=863 comm="apparmor_parser"
[ 4.499604] audit: type=1400 audit(1483386190.072:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=863 comm="apparmor_parser"
[ 4.499608] audit: type=1400 audit(1483386190.072:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=863 comm="apparmor_parser"
[ 4.499612] audit: type=1400 audit(1483386190.072:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=863 comm="apparmor_parser"
[ 4.500214] audit: type=1400 audit(1483386190.072:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=867 comm="apparmor_parser"
[ 4.501333] audit: type=1400 audit(1483386190.076:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=869 comm="apparmor_parser"
[ 4.503757] audit: type=1400 audit(1483386190.076:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=868 comm="apparmor_parser"
[ 4.575431] hid-multitouch 0018:04F3:3022.0004: Ignoring the extra HID_DG_INPUTMODE
[ 4.575483] input: ELAN1200:00 04F3:3022 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-ELAN1200:00/0018:04F3:3022.0004/input/input14
[ 4.575675] hid-multitouch 0018:04F3:3022.0004: input,hidraw3: I2C HID v1.00 Mouse [ELAN1200:00 04F3:3022] on i2c-ELAN1200:00
[ 5.418075] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.418078] Bluetooth: BNEP filters: protocol multicast
[ 5.418083] Bluetooth: BNEP socket layer initialized
[ 5.673468] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5.674299] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 5.675050] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 5.737082] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 5.738040] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 5.769375] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5.875641] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 7.785916] Bluetooth: RFCOMM TTY layer initialized
[ 7.785923] Bluetooth: RFCOMM socket layer initialized
[ 7.785928] Bluetooth: RFCOMM ver 1.11
[ 9.115169] audit_printk_skb: 45 callbacks suppressed
[ 9.115173] audit: type=1400 audit(1483386194.688:26): apparmor="DENIED" operation="exec" profile="/usr/share/hplip/systray.py" name="/usr/bin/curl" pid=1729 comm="hp-upgrade" requested_mask="x" denied_mask="x" fsuid=1000 ouid=0
[ 9.247754] audit: type=1400 audit(1483386194.820:27): apparmor="DENIED" operation="exec" profile="/usr/share/hplip/systray.py" name="/bin/ping" pid=1739 comm="hp-upgrade" requested_mask="x" denied_mask="x" fsuid=1000 ouid=0
[ 9.280885] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 12.949295] xembedsniproxy[1508]: segfault at 2 ip 000000000040f435 sp 00007ffe51cbafb0 error 4 in xembedsniproxy[400000+16000]
[ 39.053179] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 55.802982] wlp2s0: authenticate with 24:95:04:c1:a8:9c
[ 55.809165] wlp2s0: send auth to 24:95:04:c1:a8:9c (try 1/3)
[ 55.811094] wlp2s0: authenticated
[ 55.815216] wlp2s0: associate with 24:95:04:c1:a8:9c (try 1/3)
[ 55.819000] wlp2s0: RX AssocResp from 24:95:04:c1:a8:9c (capab=0x411 status=0 aid=3)
[ 55.820534] wlp2s0: associated
[ 55.820574] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
philippe@philippe-UX310UA:~$
je n'y connais vraiment rien mais je ne comprends pas pourquoi la ligne :
[ 55.802982] wlp2s0: authenticate with 24:95:04:c1:a8:9c
qui semble débloquer la situation intervient si tard
Bonne soirée
