Je fais ca tout de suite. Je mets ces imprimes écran du message d'erreur si jamais
EDIT: Voila la suite.
bisnext report id fc5be also available at [url]http://paste.debian.net/929864/[/url]
bisnext 0.02
============================ Hardware and System Summary ======================
System: Kernel: 4.8.0-49-generic i686 (32 bit gcc: 5.4.0)
Desktop: N/A dm: lightdm Distro: Ubuntu 16.04.2 LTS
Machine: Device: laptop System: Notebook product: N24_25JU Chassis: type: 10
Mobo: Notebook model: N24_25JU
UEFI [Legacy]: American Megatrends v: 5.11 date: 06/03/2016
CPU: Dual core Intel Pentium 4405U (-HT-MCP-) cache: 2048 KB
flags: (lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 8448
clock speeds: min/max: 400/2100 MHz 1: 499 MHz 2: 500 MHz
3: 499 MHz 4: 500 MHz
Memory: Array-1 capacity: 16 GB devices: 2 EC: None
Device-1: ChannelA-DIMM0 size: 4 GB speed: 1600 MHz type: DDR3
manufacturer: 1315 part: CT51264BF160BJ.M8F
Device-2: ChannelB-DIMM0 size: No Module Installed type: N/A
Graphics: Card: Intel Device 1906 bus-ID: 00:02.0 chip-ID: 8086:1906
Display Server: X.Org 1.18.4 drivers: modesetting (unloaded: fbdev,vesa)
tty size: 1366x768@60.06hz
GLX Renderer: Mesa DRI Intel HD Graphics 510 (Skylake GT1) x86/MMX/SSE2
GLX Version: 3.0 Mesa 12.0.6 Direct Rendering: Yes
Audio: Card Intel Sunrise Point-LP HD Audio
driver: snd_hda_intel bus-ID: 00:1f.3 chip-ID: 8086:9d70
Sound: Advanced Linux Sound Architecture v: k4.8.0-49-generic
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: e000
bus-ID: 01:00.1 chip-ID: 10ec:8168
IF: enp1s0f1 state: down mac: <filter>
Card-2: Intel Wireless 7265
driver: iwlwifi bus-ID: 02:00.0 chip-ID: 8086:095a
IF: wlp2s0 state: up mac: <filter>
Drives: HDD Total Size: 1000.2GB (1.1% used)
ID-1: /dev/sda model: ST1000LM035 size: 1000.2GB
Optical: No optical drives detected.
Partition: ID-1: / size: 913G used: 6.2G (1%) fs: ext4 dev: /dev/sda1
label: N/A uuid: a339ac78-3348-41ba-8de4-698d11f93979
ID-2: swap-1 size: 4.20GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
label: N/A uuid: 4b746e79-9b81-478e-80a8-640634fd5f99
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: No unmounted partitions detected
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb [url]http://fr.archive.ubuntu.com/ubuntu/[/url] xenial main restricted
deb [url]http://fr.archive.ubuntu.com/ubuntu/[/url] xenial-updates main restricted
deb [url]http://fr.archive.ubuntu.com/ubuntu/[/url] xenial universe
deb [url]http://fr.archive.ubuntu.com/ubuntu/[/url] xenial-updates universe
deb [url]http://fr.archive.ubuntu.com/ubuntu/[/url] xenial multiverse
deb [url]http://fr.archive.ubuntu.com/ubuntu/[/url] xenial-updates multiverse
deb [url]http://fr.archive.ubuntu.com/ubuntu/[/url] xenial-backports main restricted universe multiverse
deb [url]http://archive.canonical.com/ubuntu[/url] xenial partner
Active apt sources in file: /etc/apt/sources.list.d/xenial-partner.list
deb [url]http://archive.canonical.com/ubuntu[/url] xenial partner
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 50.5% command: firefox pid: 2581 mem: 316.41MB (8.0%)
2: cpu: 5.2% command: libflashplayer.so (started by: plugin-container) pid: 2803 mem: 67.59MB (1.7%)
3: cpu: 3.5% command: compiz pid: 1420 mem: 96.75MB (2.4%)
4: cpu: 3.4% command: Xorg pid: 922 mem: 72.22MB (1.8%)
5: cpu: 2.1% command: apport-gtk (started by: python3) pid: 1702 mem: 92.64MB (2.3%)
6: cpu: 1.3% command: gnome-terminal-server pid: 2885 mem: 31.83MB (0.8%)
7: cpu: 0.5% command: bash pid: 5182 mem: 3.83MB (0.0%)
8: cpu: 0.3% command: sudo pid: 5181 mem: 3.77MB (0.0%)
9: cpu: 0.2% command: gnome-software pid: 1542 mem: 67.93MB (1.7%)
10: cpu: 0.2% command: nautilus pid: 1525 mem: 47.93MB (1.2%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 316.34MB (8.0%) command: firefox pid: 2581 cpu: 50.4%
2: mem: 96.75MB (2.4%) command: compiz pid: 1420 cpu: 3.5%
3: mem: 92.64MB (2.3%) command: apport-gtk (started by: python3) pid: 1702 cpu: 2.1%
4: mem: 72.21MB (1.8%) command: Xorg pid: 922 cpu: 3.4%
5: mem: 67.93MB (1.7%) command: gnome-software pid: 1542 cpu: 0.2%
6: mem: 67.59MB (1.7%) command: libflashplayer.so (started by: plugin-container) pid: 2803 cpu: 5.2%
7: mem: 48.73MB (1.2%) command: evolution-calendar-factory pid: 1545 cpu: 0.0%
8: mem: 47.93MB (1.2%) command: nautilus pid: 1525 cpu: 0.2%
9: mem: 39.58MB (1.0%) command: evolution-calendar-factory-subprocess pid: 1618 cpu: 0.0%
10: mem: 39.17MB (0.9%) command: hud-service pid: 1309 cpu: 0.0%
Info: Processes: 220 Uptime: 21 min Memory: 974.7/3951.9MB
Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
Client: Shell (bash 4.3.461 running in bash) inxi: 2.3.8
_______________________________ UEFI settings _________________________________
Computer booted in Legacy mode for this session.
UEFI currently not active or not available on this system.
__________________________________ Secure Boot ________________________________
Secure Boot disabled or not available on this system.
__________________________________ OS prober ________________________________
============================= Boot Info Summary ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info =============================
Drive: sda _____________________________________________________________________
Disque /dev/sda : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 1,945,309,183 1,945,307,136 83 Linux
/dev/sda2 1,945,311,230 1,953,523,711 8,212,482 5 Extended
/dev/sda5 1,945,311,232 1,953,523,711 8,212,480 82 Linux swap / Solaris
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 a339ac78-3348-41ba-8de4-698d11f93979 ext4
/dev/sda5 4b746e79-9b81-478e-80a8-640634fd5f99 swap
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 avril 28 14:34 ata-ST1000LM035-1RK172_WCB18X1Q -> ../../sda
lrwxrwxrwx 1 root root 10 avril 28 14:34 ata-ST1000LM035-1RK172_WCB18X1Q-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 avril 28 14:34 ata-ST1000LM035-1RK172_WCB18X1Q-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 avril 28 14:34 ata-ST1000LM035-1RK172_WCB18X1Q-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 avril 28 14:34 wwn-0x5000c5009c5ff6f6 -> ../../sda
lrwxrwxrwx 1 root root 10 avril 28 14:34 wwn-0x5000c5009c5ff6f6-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 avril 28 14:34 wwn-0x5000c5009c5ff6f6-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 avril 28 14:34 wwn-0x5000c5009c5ff6f6-part5 -> ../../sda5
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
_______________________________ Free disk space _______________________________
Filesystem Mounted on Type Size Used Avail Use% IUse%
/dev/sda1 / ext4 913G 6.2G 861G 1% 1%
============================= Boot Files Content ==============================
___________________________ sda1/boot/grub/grub.cfg: ___________________________
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/10_linux ###
--- Notice bisnext removed top of file content from the report for readability
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-a339ac78-3348-41ba-8de4-698d11f93979' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a339ac78-3348-41ba-8de4-698d11f93979
else
search --no-floppy --fs-uuid --set=root a339ac78-3348-41ba-8de4-698d11f93979
fi
linux /boot/vmlinuz-4.8.0-49-generic root=UUID=a339ac78-3348-41ba-8de4-698d11f93979 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.8.0-49-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a339ac78-3348-41ba-8de4-698d11f93979
else
search --no-floppy --fs-uuid --set=root a339ac78-3348-41ba-8de4-698d11f93979
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a339ac78-3348-41ba-8de4-698d11f93979
else
search --no-floppy --fs-uuid --set=root a339ac78-3348-41ba-8de4-698d11f93979
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
_______________________________ sda1/etc/fstab: ________________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=a339ac78-3348-41ba-8de4-698d11f93979 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=4b746e79-9b81-478e-80a8-640634fd5f99 none swap sw 0 0
____________________________ sda1/etc/default/grub: ____________________________
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
===============================================================================
System Info for The Running System
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/boot/vmlinuz-4.8.0-49-generic root=UUID=a339ac78-3348-41ba-8de4-698d11f93979 ro quiet splash vt.handoff=7
_______________________________ Wireless Status _______________________________
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
_________________________________ USB devices __________________________________
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 04f2:b59e Chicony Electronics Co., Ltd
Bus 001 Device 002: ID 8087:0a2a Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M
|__ Port 5: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 5: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
|__ Port 6: Dev 3, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 6: Dev 3, If 1, Class=Video, Driver=uvcvideo, 480M
______________________________ Boot-up Statistics ______________________________
Startup finished in 10.770s (kernel) + 13.714s (userspace) = 24.484s
blame, first 10:
dev-sda1.device 5.675s
apport.service 5.451s
irqbalance.service 5.319s
ondemand.service 5.194s
speech-dispatcher.service 5.173s
apparmor.service 3.839s
accounts-daemon.service 3.820s
grub-common.service 3.463s
systemd-tmpfiles-setup.service 3.276s
lightdm.service 3.068s
critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
1 graphical.target @13.688s
2 multi-user.target @13.688s
3 grub-common.service @10.224s +3.463s
4 basic.target @7.861s
5 sockets.target @7.861s
6 snapd.socket @7.860s +852us
7 sysinit.target @7.804s
8 swap.target @7.804s
9 dev-disk-by\x2duuid-4b746e79\x2d9b81\x2d478e\x2d80a8\x2d640634fd5f99.swap @7.661s +140ms
10 dev-disk-by\x2duuid-4b746e79\x2d9b81\x2d478e\x2d80a8\x2d640634fd5f99.device @7.647s
___________________________________ Modules Loaded ____________________________
Module Size Used by
ablk_helper 16384 1 aesni_intel
ac97_bus 16384 1 snd_soc_core
acpi_pad 16384 0
aes_i586 20480 1 aesni_intel
aesni_intel 20480 2
ahci 36864 2
arc4 16384 2
autofs4 40960 2
bluetooth 491520 33 btrtl,hci_uart,btintel,btqca,bnep,btbcm,rfcomm,btusb
bnep 20480 2
btbcm 16384 2 hci_uart,btusb
btintel 16384 2 hci_uart,btusb
btqca 16384 1 hci_uart
btrfs 1077248 0
btrtl 16384 1 btusb
btusb 36864 0
ccm 20480 1
cfg80211 512000 3 iwlmvm,iwlwifi,mac80211
coretemp 16384 0
crc32_pclmul 16384 0
cryptd 20480 1 ablk_helper
drm 311296 5 i915,drm_kms_helper
drm_kms_helper 155648 1 i915
fb_sys_fops 16384 1 drm_kms_helper
fjes 28672 0
hci_uart 81920 0
hfs 57344 0
hfsplus 98304 0
hid 98304 1 i2c_hid
i2c_algo_bit 16384 1 i915
i2c_hid 20480 0
i915 1249280 97
input_leds 16384 0
intel_cstate 16384 0
intel_lpss 16384 1 intel_lpss_acpi
intel_lpss_acpi 16384 0
intel_powerclamp 16384 0
intel_rapl 20480 0
intel_rapl_perf 16384 0
irqbypass 16384 1 kvm
iwlmvm 339968 0
iwlwifi 200704 1 iwlmvm
jfs 176128 0
joydev 20480 0
kvm 520192 1 kvm_intel
kvm_intel 192512 0
libahci 32768 1 ahci
libcrc32c 16384 1 xfs
lp 20480 0
lrw 16384 1 aesni_intel
mac80211 679936 1 iwlmvm
mac_hid 16384 0
media 36864 2 uvcvideo,videodev
mei 90112 1 mei_me
mei_me 28672 0
memstick 16384 1 rtsx_pci_ms
mii 16384 1 r8169
minix 36864 0
msdos 20480 0
ntfs 102400 0
parport 49152 3 lp,parport_pc,ppdev
parport_pc 32768 0
pinctrl_intel 20480 1 pinctrl_sunrisepoint
pinctrl_sunrisepoint 24576 0
ppdev 20480 0
psmouse 122880 0
qnx4 16384 0
r8169 77824 0
raid6_pq 102400 1 btrfs
rfcomm 65536 2
rtsx_pci 53248 2 rtsx_pci_sdmmc,rtsx_pci_ms
rtsx_pci_ms 20480 0
rtsx_pci_sdmmc 24576 0
serio_raw 16384 0
shpchp 32768 0
snd 69632 19 snd_compress,snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_soc_core,snd_pcm
snd_compress 20480 1 snd_soc_core
snd_hda_codec 118784 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_generic 69632 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 45056 1
snd_hda_codec_realtek 77824 1
snd_hda_core 69632 7 snd_hda_intel,snd_hda_codec,snd_hda_ext_core,snd_soc_skl,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_ext_core 28672 1 snd_soc_skl
snd_hda_intel 32768 3
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 94208 8 snd_hda_intel,snd_hda_codec,snd_pcm_dmaengine,snd_hda_ext_core,snd_hda_core,snd_soc_skl,snd_hda_codec_hdmi,snd_soc_core
snd_pcm_dmaengine 16384 1 snd_soc_core
snd_rawmidi 28672 1 snd_seq_midi
snd_seq 57344 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_soc_core 200704 1 snd_soc_skl
snd_soc_skl 53248 0
snd_soc_skl_ipc 45056 1 snd_soc_skl
snd_soc_sst_dsp 28672 1 snd_soc_skl_ipc
snd_soc_sst_ipc 16384 1 snd_soc_skl_ipc
snd_soc_sst_match 16384 1 snd_soc_skl
snd_timer 32768 2 snd_seq,snd_pcm
soundcore 16384 1 snd
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
ufs 73728 0
uvcvideo 77824 0
video 36864 1 i915
videobuf2_core 40960 2 uvcvideo,videobuf2_v4l2
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_v4l2 24576 1 uvcvideo
videobuf2_vmalloc 16384 1 uvcvideo
videodev 159744 3 uvcvideo,videobuf2_core,videobuf2_v4l2
wmi 16384 0
x86_pkg_temp_thermal 16384 0
xfs 954368 0
xor 28672 1 btrfs
______________________________ Additional Drivers _____________________________
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
__________________________________ Locales ___________________________________
locale command output:
LANG=fr_FR.UTF-8
LANGUAGE=fr_FR
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_ALL=
/etc/default/locale:
# File generated by update-locale
LANG="fr_FR.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: fr,fr,us
variant: latin9,oss,
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="latin9"
XKBOPTIONS=""
BACKSPACE="guess"
_____________________________ Upgradable Packages _____________________________
None
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
__________________ Configuration files of uninstalled packages: ________________
Package Version
linux-image-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-image-extra-4.8.0-36-generic 4.8.0-36.36~16.04.1
snap-confine 2.24.1
Use the following command to clean old configuration files:
sudo apt purge linux-image-4.8.0-36-generic linux-image-extra-4.8.0-36-generic snap-confine
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic-hwe-16.04 4.8.0.49.21
linux-headers-4.8.0-46 4.8.0-46.49~16.04.1
linux-headers-4.8.0-46-generic 4.8.0-46.49~16.04.1
linux-headers-4.8.0-49 4.8.0-49.52~16.04.1
linux-headers-4.8.0-49-generic 4.8.0-49.52~16.04.1
linux-headers-generic-hwe-16.04 4.8.0.49.21
linux-image-4.8.0-46-generic 4.8.0-46.49~16.04.1
linux-image-4.8.0-49-generic 4.8.0-49.52~16.04.1
linux-image-extra-4.8.0-46-generic 4.8.0-46.49~16.04.1
linux-image-extra-4.8.0-49-generic 4.8.0-49.52~16.04.1
linux-image-generic-hwe-16.04 4.8.0.49.21
File list in /boot directory:
abi-4.8.0-46-generic
abi-4.8.0-49-generic
config-4.8.0-46-generic
config-4.8.0-49-generic
grub
initrd.img-4.8.0-46-generic
initrd.img-4.8.0-49-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.8.0-46-generic
System.map-4.8.0-49-generic
vmlinuz-4.8.0-46-generic
vmlinuz-4.8.0-49-generic
_________________________________ System Logs ________________________________
Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.000000] ACPI: UEFI 0x0000000087B7FA30 000042 (v01 00000000 00000000)
[ 0.164824] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.175856] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.178254] ACPI Error: [PEGS] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 0.178258] ACPI Error: Method parse/execution failed [\_SB.PCI0.PEG0.PG00._ON] (Node f20c83c0), AE_NOT_FOUND (20160422/psparse-542)
[ 0.178605] ACPI Error: [PEGS] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 0.178608] ACPI Error: Method parse/execution failed [\_SB.PCI0.PEG1.PG01._ON] (Node f20cab10), AE_NOT_FOUND (20160422/psparse-542)
[ 0.178941] ACPI Error: [PEGS] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 0.178944] ACPI Error: Method parse/execution failed [\_SB.PCI0.PEG2.PG02._ON] (Node f20cadc8), AE_NOT_FOUND (20160422/psparse-542)
[ 0.193570] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.221586] ACPI : EC: GPE = 0x50, I/O: command/status = 0x66, data = 0x62
[ 2.068362] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.069041] ata2: SATA link down (SStatus 4 SControl 300)
[ 13.570321] WARNING: CPU: 1 PID: 245 at /build/linux-hwe-BnNP_5/linux-hwe-4.8.0/arch/x86/include/asm/fpu/internal.h:368 fpu__restore+0x21b/0x230
[ 14.137898] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 15.536643] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2
[ 15.536657] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2
[ 17.730547] audit: type=1400 audit(1493382887.582:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=637 comm="apparmor_parser"
[ 17.730557] audit: type=1400 audit(1493382887.582:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=637 comm="apparmor_parser"
[ 17.730564] audit: type=1400 audit(1493382887.582:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=637 comm="apparmor_parser"
[ 17.730570] audit: type=1400 audit(1493382887.582:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=637 comm="apparmor_parser"
[ 17.731268] audit: type=1400 audit(1493382887.582:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=636 comm="apparmor_parser"
[ 17.731274] audit: type=1400 audit(1493382887.582:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=636 comm="apparmor_parser"
[ 17.735655] audit: type=1400 audit(1493382887.586:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=658 comm="apparmor_parser"
[ 17.760917] audit: type=1400 audit(1493382887.610:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=659 comm="apparmor_parser"
[ 17.760926] audit: type=1400 audit(1493382887.610:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=659 comm="apparmor_parser"
[ 17.760930] audit: type=1400 audit(1493382887.610:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=659 comm="apparmor_parser"
[ 25.641877] wlp2s0: RX AssocResp from 5c:33:8e:06:dd:ed (capab=0x431 status=0 aid=2)
_____________________________________ Xorg ____________________________________
xinput:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=12 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ Chicony USB2.0 Camera id=10 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=11 [slave keyboard (3)]
xrandr:
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
eDP-1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 309mm x 173mm
1366x768 60.06*+
1360x768 59.80 59.96
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
960x600 60.00
960x540 59.99
800x600 60.00 60.32 56.25
840x525 60.01 59.88
800x512 60.17
700x525 59.98
640x512 60.02
720x450 59.89
640x480 60.00 59.94
680x384 59.80 59.96
576x432 60.06
512x384 60.00
400x300 60.32 56.34
320x240 60.05
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.679] (==) No Layout section. Using the first Screen section.
[ 24.679] (==) No screen section available. Using defaults.
[ 24.679] (**) |-->Screen "Default Screen Section" (0)
[ 24.679] (**) | |-->Monitor "<default monitor>"
[ 24.680] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 24.695] (--) PCI:*(0:0:2:0) 8086:1906:1558:2425 rev 7, Mem @ 0xde000000/16777216, 0xc0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 24.695] (II) LoadModule: "glx"
[ 24.732] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 24.791] (II) LoadModule: "modesetting"
[ 24.791] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 24.804] (II) LoadModule: "fbdev"
[ 24.804] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 24.811] (II) LoadModule: "vesa"
[ 24.811] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 24.827] (WW) Falling back to old probe method for fbdev
[ 24.827] (II) Loading sub module "fbdevhw"
[ 24.827] (II) LoadModule: "fbdevhw"
[ 24.827] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 24.837] (WW) Falling back to old probe method for vesa
[ 24.837] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 24.837] (II) Loading sub module "glamoregl"
[ 24.837] (II) LoadModule: "glamoregl"
[ 24.837] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 25.072] (II) modeset(0): Output eDP-1 has no monitor section
[ 25.074] (II) modeset(0): Output DP-1 has no monitor section
[ 25.075] (II) modeset(0): Output HDMI-1 has no monitor section
[ 25.080] (II) Loading sub module "fb"
[ 25.080] (II) LoadModule: "fb"
[ 25.080] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.081] (II) UnloadModule: "fbdev"
[ 25.081] (II) UnloadModule: "vesa"
[ 25.256] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 25.305] (II) modeset(0): Setting screen physical size to 361 x 203
[ 25.509] (II) LoadModule: "evdev"
[ 25.510] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.593] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
[ 25.593] (II) LoadModule: "synaptics"
[ 25.593] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.8.0-49-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.8.0-49-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 8086:1906
BusID "PCI:0@0:2:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Found "/dev/dri/card0", driven by "i915"
output 0:
card0-eDP-1
Number of connected outputs for /dev/dri/card0: 1
Does it require offloading? yes
last cards number = 1
Has amd? no
Has intel? yes
Has nvidia? no
How many cards? 1
Has the system changed? No
main_arch_path i386-linux-gnu, other_arch_path x86_64-linux-gnu
Current alternative: /usr/lib/i386-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/i386-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no
Single card detected
Nothing to do
No change - nothing to do
============================ Disks SMART attributes ===========================
### ATA disks: sda
# Drive sda:
smartctl 6.5 2016-01-24 r4214 [i686-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, [url=http://www.smartmontools.org]www.smartmontools.org[/url]
=== START OF INFORMATION SECTION ===
Device Model: ST1000LM035-1RK172
LU WWN Device Id: 5 000c50 09c5ff6f6
Firmware Version: SDM1
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Apr 28 14:55:52 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 076 064 006 - 37499850
3 Spin_Up_Time PO---- 099 099 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 89
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 068 060 045 - 6530753
9 Power_On_Hours -O--CK 100 100 000 - 96 (29 244 0)
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 57
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 068 059 040 - 32 (Min/Max 32/34)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 4
192 Power-Off_Retract_Count -O--CK 100 100 000 - 1
193 Load_Cycle_Count -O--CK 100 100 000 - 1475
194 Temperature_Celsius -O---K 032 041 000 - 32 (0 12 0 0 0)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 86 (34 80 0)
241 Total_LBAs_Written ------ 100 253 000 - 201848628
242 Total_LBAs_Read ------ 100 253 000 - 79792006
254 Free_Fall_Sensor -O--CK 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
