Contrairement à la première installation, cette fois ça a planté, comprends pas.
Voici le rapport !
Jun 29 2017, bisnext report id b857b also available at [url]https://paste.debian.net/973973/[/url]
bisnext 0.05
============================ Hardware and System Summary ======================
System: Kernel: 4.10.0-19-generic x86_64 (64 bit gcc: 6.3.0)
Console: tty 0 dm: gdm3 Distro: Ubuntu 17.04
Machine: Device: laptop System: ASUSTeK product: E403SA v: 1.0
Mobo: ASUSTeK model: E403SA v: 1.0
UEFI: American Megatrends v: E403SA.213 date: 09/09/2015
Battery BAT0: charge: 8.8 Wh 17.4% condition: 50.7/57.0 Wh (89%)
volts: 11.4/11.4
model: ASUSTeK E403-50 status: Discharging
CPU: Quad core Intel Pentium N3700 (-MCP-) cache: 1024 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 12800
clock speeds: min/max: 480/2400 MHz 1: 479 MHz 2: 479 MHz
3: 538 MHz 4: 779 MHz
Memory: Array-1 capacity: 8 GB devices: 2 EC: None
Device-1: A1_DIMM0 size: 2 GB speed: 1066 MHz type: DDR3
manufacturer: Hynix Semiconduc part: HMT425S6AFR6A-PB
Device-2: A1_DIMM1 size: 2 GB speed: 1066 MHz type: DDR3
manufacturer: N/A part: N/A
Graphics: Card: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller
bus-ID: 00:02.0 chip-ID: 8086:22b1
Display Server: X.Org 1.19.3 drivers: modesetting (unloaded: fbdev,vesa)
Resolution: 1366x768@60.00hz
OpenGL: renderer: Mesa DRI Intel HD Graphics 405 (Braswell)
version: 4.5 Mesa 17.0.3 (compat-v: 3.0) Direct Render: Yes
Audio: Card Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:2284
Sound: Advanced Linux Sound Architecture v: k4.10.0-19-generic
Network: Card: Qualcomm Atheros AR9462 Wireless Network Adapter
driver: ath9k bus-ID: 02:00.0 chip-ID: 168c:0034
IF: wlp2s0 state: up mac: <filter>
Drives: HDD Total Size: 8.0GB (87.1% used)
ID-1: /dev/mmcblk0 model: N/A size: 125.1GB
ID-2: USB /dev/sda model: Transcend_8GB size: 8.0GB
Optical: No optical drives detected.
Partition: ID-1: /target size: 55G used: 6.6G (13%) fs: ext4 dev: /dev/mmcblk0p5
label: N/A uuid: 0f167c67-73d3-44d6-b1f4-b9eb9b047cdf
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/mmcblk0 size: 125.07G label: N/A uuid: N/A
ID-2: /dev/mmcblk0p1 size: 65.45G
fs: ext4 label: N/A uuid: 85b8daed-15c9-4b0b-8a8b-4021661a3b9d
ID-3: /dev/mmcblk0boot1 size: 0.00G label: N/A uuid: N/A
ID-4: /dev/mmcblk0boot0 size: 0.00G label: N/A uuid: N/A
ID-5: /dev/sda1 size: 1.52G
label: N/A uuid: 2017-04-12-03-43-30-00
ID-6: /dev/sda2 size: 0.00G
fs: FAT (12 bit) label: Ubuntu-GNOME 17.04 amd64 uuid: C1B1-9637
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb cdrom:[Ubuntu-GNOME 17.04 _Zesty Zapus_ - Release amd64 (20170412)]/ zesty main multiverse restricted universe
deb [url]http://archive.ubuntu.com/ubuntu/[/url] zesty main restricted universe
deb [url]http://security.ubuntu.com/ubuntu/[/url] zesty-security main restricted universe
deb [url]http://archive.ubuntu.com/ubuntu/[/url] zesty-updates main restricted universe
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 14.0% command: gnome-shell pid: 15545 mem: 167.34MB (4.3%)
2: cpu: 13.9% command: firefox pid: 15845 mem: 272.24MB (7.0%)
3: cpu: 10.4% command: gnome-software pid: 16002 mem: 151.50MB (3.9%)
4: cpu: 6.6% command: plugin-container pid: 15943 mem: 172.08MB (4.4%)
5: cpu: 5.5% command: Xorg pid: 15425 mem: 51.14MB (1.3%)
6: cpu: 1.9% command: aptd (started by: python3) pid: 16272 mem: 77.15MB (2.0%)
7: cpu: 1.4% command: gnome-terminal-server pid: 16001 mem: 38.46MB (0.9%)
8: cpu: 0.9% command: fwupd pid: 16126 mem: 48.90MB (1.2%)
9: cpu: 0.8% command: bash pid: 22309 mem: 4.40MB (0.1%)
10: cpu: 0.5% command: tracker-store pid: 15715 mem: 26.27MB (0.6%)
Info: Processes: 237 Uptime: 1:22 Memory: 1450.1/3853.4MB
Init: systemd v: 232 runlevel: 5 Gcc sys: 6.3.0
Client: Shell (bash 4.4.51 running in bash) inxi: 2.3.22
_______________________________ UEFI settings _________________________________
Computer booted in UEFI mode for this session.
BootCurrent: 0001
Timeout: 1 seconds
BootOrder: 0001,0002
Boot0001* UEFI: JetFlashTranscend 8GB 8.07, Partition 1 PciRoot(0x0)/Pci(0x14,0x0)/USB(0,0)/HD(1,MBR,0x4294967282,0x14a80,0x1200)..BO
Boot0002* Hard Drive BBS(HD,,0x0)..GO..NO........S.J.e.t.F.l.a.s.h.T.r.a.n.s.c.e.n.d. .8.G.B. .8...0.7....................A.......................&..Gd-.;.A..MQ..L.A.M.D.A.5.P.I.3........BO
vfat partition details:
/dev/sda2: SEC_TYPE="msdos" UUID="C1B1-9637" TYPE="vfat" PARTUUID="782a20f2-02"
Secure Boot disabled or not available on this system.
__________________________________ OS prober ________________________________
/dev/mmcblk0p1:Ubuntu 17.04 (17.04):Ubuntu:linux
========================= Boot Information Details ============================
=> No known boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: iso9660
Boot sector type: Unknown
Boot sector info:
Mounting failed: mount: /dev/sda1 is already mounted or /tmp/bisnext-IlGGqB5d/sda1 busy
sda2: __________________________________________________________________________
File system: vfat
Boot sector type: FAT16
Boot sector info: According to the info in the boot sector, sda2 starts
at sector 0. But according to the info from fdisk,
sda2 starts at sector 84608. According to the info in
the boot sector, sda2 has 0 sectors.
Mounting failed: mount: /dev/sda1 is already mounted or /tmp/bisnext-IlGGqB5d/sda1 busy
mount: /dev/sda2 is already mounted or /tmp/bisnext-IlGGqB5d/sda2 busy
mmcblk0: _______________________________________________________________________
File system:
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v1.99-2.00) is installed in the boot sector of
mmcblk0 and looks at sector 1 of the same hard drive
for core.img, but core.img can not be found at this
location, PROBLEM !.
Mounting failed: mount: /dev/sda1 is already mounted or /tmp/bisnext-IlGGqB5d/sda1 busy
mount: /dev/sda2 is already mounted or /tmp/bisnext-IlGGqB5d/sda2 busy
mount: unknown filesystem type ''
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disk /dev/sda: 7.5 GiB, 8032092160 bytes, 15687680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 0 2,964,415 2,964,416 0 Empty
/dev/sda2 84,608 89,215 4,608 ef EFI (FAT-12/16/32)
/dev/sda1 overlaps with /dev/sda2
GUID Partition Table detected, but does not seem to be used.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 + R 0 2,964,359 2,964,360 Data partition (Windows/Linux)
/dev/sda2 + R 84,608 89,215 4,608 Data partition (Windows/Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/mmcblk0
/dev/mmcblk0p1 85b8daed-15c9-4b0b-8a8b-4021661a3b9d ext4
/dev/mmcblk0p5 0f167c67-73d3-44d6-b1f4-b9eb9b047cdf ext4
/dev/sda1 2017-04-12-03-43-30-00 iso9660 Ubuntu-GNOME 17.04 amd64
/dev/sda2 C1B1-9637 vfat
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 13 Jun 29 19:38 mmc-DF4128_0x8f63638a -> ../../mmcblk0
lrwxrwxrwx 1 root root 15 Jun 29 19:38 mmc-DF4128_0x8f63638a-part1 -> ../../mmcblk0p1
lrwxrwxrwx 1 root root 15 Jun 29 19:38 mmc-DF4128_0x8f63638a-part2 -> ../../mmcblk0p2
lrwxrwxrwx 1 root root 15 Jun 29 19:38 mmc-DF4128_0x8f63638a-part5 -> ../../mmcblk0p5
lrwxrwxrwx 1 root root 9 Jun 29 19:38 usb-JetFlash_Transcend_8GB_AMDA5PI3-0:0 -> ../../sda
lrwxrwxrwx 1 root root 10 Jun 29 19:38 usb-JetFlash_Transcend_8GB_AMDA5PI3-0:0-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jun 29 19:38 usb-JetFlash_Transcend_8GB_AMDA5PI3-0:0-part2 -> ../../sda2
_________________________ "ls -R /dev/mapper/" output _________________________
None
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sda /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/mmcblk0p5 /target ext4 (rw,relatime,errors=remount-ro,data=ordered)
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu-gnome.seed boot=casper only-ubiquity quiet splash ---
______________________________ Boot-up Statistics ______________________________
Startup finished in 4.870s (firmware) + 7.391s (loader) + 30.903s (kernel) + 1h 17min 29.106s (userspace) = 1h 18min 12.272s
blame, first 10:
ubiquity.service1h 17min 27.514s
dev-sda.device 3.588s
fwupd.service 2.864s
snapd.autoimport.service 2.049s
ModemManager.service 1.890s
NetworkManager.service 1.856s
networking.service 1.478s
accounts-daemon.service 1.457s
irqbalance.service 1.259s
apport.service 1.066s
_________________________ RAM usage & Free disk space _________________________
total used free shared buff/cache available
Mem: 3.8G 992M 177M 440M 2.6G 2.1G
Swap: 2.0G 1.3M 2.0G
Swappiness = 60
Filesystem Mounted on Type Size Used Avail Use% IUse%
aufs / aufs 1.9G 297M 1.6G 16% 1%
/dev/loop0 /rofs squashfs 1.4G 1.4G 0 100% 100%
/dev/mmcblk0p1 /tmp/bisnext-IlGGqB5d/mnt/mmcblk0p1 ext4 60G 6.1G 51G 11% 5%
/dev/mmcblk0p5 /target ext4 55G 6.6G 46G 13% 6%
/dev/sda /cdrom iso9660 1.5G 1.5G 0 100% -
_______________________________ Wireless Status _______________________________
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
2: asus-wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
3: asus-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
_______________________________ Modules Loaded _______________________________
Excerpt:
drm 352256 5 i915,drm_kms_helper
drm_kms_helper 151552 1 i915
i2c_algo_bit 16384 1 i915
i915 1449984 11
video 40960 3 asus_wmi,int3406_thermal,i915
______________________________ Additional Drivers _____________________________
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
_____________________________ Upgradable Packages _____________________________
Live Session
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 154 not upgraded.
_________________________ Kernel Packages Installed __________________________
Package Version Status
linux-headers-4.10.0-19 4.10.0-19.21 [installed,automatic]
linux-headers-4.10.0-19-generic 4.10.0-19.21 [installed,automatic]
linux-image-4.10.0-19-generic 4.10.0-19.21 [installed,automatic]
linux-image-extra-4.10.0-19-generic 4.10.0-19.21 [installed,automatic]
linux-signed-image-4.10.0-19-generic 4.10.0-19.21 [installed,automatic]
_________________________________ System Logs ________________________________
Failed services:
UNIT LOAD ACTIVE SUB DESCRIPTION
● smartd.service loaded failed failed Self Monitoring and Reporting Technology (SMART) Daemon
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
1 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.200887] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.211856] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 15.094894] usb 1-3: string descriptor 0 read error: -22
[ 32.445328] elan_i2c i2c-ELAN1000:00: Elan Touchpad: Module ID: 0x0005, Firmware: 0x0004, Sample: 0x000d, IAP: 0x000e
[ 34.122334] usb 1-3: string descriptor 0 read error: -22
[ 225.190840] blk_update_request: I/O error, dev mmcblk0rpmb, sector 0
[ 225.247261] blk_update_request: I/O error, dev mmcblk0rpmb, sector 0
[ 255.575644] blk_update_request: I/O error, dev mmcblk0rpmb, sector 0
[ 255.648615] blk_update_request: I/O error, dev mmcblk0rpmb, sector 0
[ 536.898914] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: errors=remount-ro
_____________________________________ Xorg ____________________________________
Partial log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 36.681] (--) PCI:*(0:0:2:0) 8086:22b1:1043:1bed rev 33, Mem @ 0x80000000/16777216, 0x90000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.10.0-19-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.10.0-19-generic/updates/dkms
Is intel loaded? yes
Vendor/Device Id: 8086:22b1
BusID "PCI:0@0:2:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Found "/dev/dri/card0", driven by "i915"
output 0:
card0-eDP-1
Number of connected outputs for /dev/dri/card0: 1
Does it require offloading? yes
I couldn't open /var/lib/ubuntu-drivers-common/last_gfx_boot for reading.
Create /var/lib/ubuntu-drivers-common/last_gfx_boot for the 1st time
last cards number = 1
Has intel? yes
How many cards? 1
Has the system changed? Yes
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is mesa enabled? yes
Is mesa egl enabled? yes
Is mesa available? yes
Is mesa egl available? yes
System configuration has changed
Single card detected
Nothing to do
No change - nothing to do
==============================================================================
# System Information for Ubuntu 17.04 in /dev/mmcblk0p1
==============================================================================
_____________________________ Upgradable Packages _____________________________
No data available.
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
_________________________ Kernel Packages Installed __________________________
_________________________________ System Logs ________________________________
Selection of relevent log entries:
None
_____________________________________ Xorg ____________________________________
None
============================ Disks SMART Attributes ===========================
### MMC disks: mmcblk0
# Drive mmcblk0:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-19-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, [url=http://www.smartmontools.org]www.smartmontools.org[/url]
/dev/mmcblk0: Unable to detect device type
Please specify device type with the -d option.
Use smartctl -h to get a usage summary
### USB disks: sda
# Drive sda:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-19-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, [url=http://www.smartmontools.org]www.smartmontools.org[/url]
Read Device Identity failed: scsi error badly formed scsi parameters
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
=============================== StdErr Messages ===============================
grub-probe: error: cannot find a GRUB drive for /dev/sda1. Check your device.map.
E: Couldn't create temporary file to work with /var/lib/apt/lists/fr.archive.ubuntu.com_ubuntu_dists_zesty_InRelease - mkstemp (30: Read-only file system)
E: The package lists or status file could not be parsed or opened.
Modération : merci à l'avenir d'utiliser les balises code (explications ici).
