Ce site est optimisé pour être consulté depuis un navigateur moderne dans lequel JavaScript est activé.

redémarrage en boucle depuis quelques temps

jajaX

oui je trouve aussi !!! j'avais déjà le me soucis quand je rabattais l'écran. enfin, plutôt à la fin du relevage, mon pc s'éteignait...

j'ai contourné lé problème en enlevant le cache qui le protège.

c'est bizarre que ça coupe comme ça mais bon...

jajaX

salut,

bon je crois que j'ai parlé un peux vite... moko138 tu peux m'en dire plus sur les résultats de smartmontools stp.

merci

moko138

Le 18/2, jajaX a écrit bon je crois que j'ai parlé un peux vite... moko138 tu peux m'en dire plus sur les résultats de smartmontools stp.

Oui je tâcherai bien sûr, quand tu auras donné les retours demandés le 9/2.
Mais n'oublie pas :

après plusieurs minutes de fonctionnement

jajaX

ok alors.

jaja@quadcore:~$ uptime
 14:40:16 up 50 min,  2 users,  load average: 2,02, 1,78, 1,25

jaja@quadcore:~$ sudo hddtemp /dev/sda ; echo ; sudo smartctl -s on -a /dev/sda
[sudo] Mot de passe de jaja : 
/dev/sda: ST2000LM003 HN-M201RAD: 41°C

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.13.0-32-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Samsung SpinPoint M9T
Device Model:     ST2000LM003 HN-M201RAD
Serial Number:    S321J9FFC00106
LU WWN Device Id: 5 0004cf 20ec7fe1b
Firmware Version: 2BC10001
User Capacity:    2 000 398 934 016 bytes [2,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Sun Feb 18 14:39:56 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (  41) The self-test routine was interrupted
                                        by the host with a hard or soft reset.
Total time to complete Offline 
data collection:                (23520) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.            
                                        Suspend Offline collection upon new                     
                                        command.                                                
                                        Offline surface scan supported.                         
                                        Self-test supported.                                    
                                        No Conveyance Self-test supported.                      
                                        Selective Self-test supported.                          
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 392) minutes.
SCT capabilities:              (0x003f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       17
  2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0
  3 Spin_Up_Time            0x0023   092   092   025    Pre-fail  Always       -       2580
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1453
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       18167
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1458
191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       405
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   059   046   000    Old_age   Always       -       41 (Min/Max 17/54)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       1
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       418
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       504
225 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       8852

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Interrupted (host reset)      90%     18009         -
# 2  Short offline       Completed: read failure       90%     18009         2424976416

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Interrupted [90% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

jaja@quadcore:~$ sudo hddtemp /dev/sdb ; echo ; sudo smartctl -s on -a /dev/sdb 
ATTENTION : Le lecteur /dev/sdb semble ne pas avoir de capteur de température.
ATTENTION : Cela ne veut pas dire qu'il n'en n'a pas.
ATTENTION : Si vous êtes sûr qu'il en a un, contactez moi (hddtemp@guzu.net).
ATTENTION : Voir les options --help, --debug et --drivebase.
/dev/sdb: INTEL SSDSA2CT040G3 :  pas de capteur

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.13.0-32-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Intel 320 Series SSDs
Device Model:     INTEL SSDSA2CT040G3
Serial Number:    PEPR4092005Q040AGN
LU WWN Device Id: 5 5cd2e4 0003e93a3
Firmware Version: 4PC10362
User Capacity:    40 020 664 320 bytes [40,0 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Sun Feb 18 14:41:12 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (    1) seconds.
Offline data collection
capabilities:                    (0x75) SMART execute Offline immediate.
                                        No Auto Offline data collection support.
                                        Abort Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (   1) minutes.
Conveyance self-test routine
recommended polling time:        (   1) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 5
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  3 Spin_Up_Time            0x0020   100   100   000    Old_age   Offline      -       0
  4 Start_Stop_Count        0x0030   100   100   000    Old_age   Offline      -       0
  5 Reallocated_Sector_Ct   0x0032   100   100   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       21429
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       1752
170 Reserve_Block_Count     0x0033   100   100   010    Pre-fail  Always       -       0
171 Program_Fail_Count      0x0032   100   100   000    Old_age   Always       -       0
172 Erase_Fail_Count        0x0032   100   100   000    Old_age   Always       -       0
183 SATA_Downshift_Count    0x0030   100   100   000    Old_age   Offline      -       0
184 End-to-End_Error        0x0032   100   100   090    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
192 Unsafe_Shutdown_Count   0x0032   100   100   000    Old_age   Always       -       337
199 CRC_Error_Count         0x0030   100   100   000    Old_age   Offline      -       1
225 Host_Writes_32MiB       0x0032   100   100   000    Old_age   Always       -       51772
226 Workld_Media_Wear_Indic 0x0032   100   100   000    Old_age   Always       -       337515
227 Workld_Host_Reads_Perc  0x0032   100   100   000    Old_age   Always       -       30
228 Workload_Minutes        0x0032   100   100   000    Old_age   Always       -       810795641
232 Available_Reservd_Space 0x0033   100   100   010    Pre-fail  Always       -       0
233 Media_Wearout_Indicator 0x0032   099   099   000    Old_age   Always       -       0
241 Host_Writes_32MiB       0x0032   100   100   000    Old_age   Always       -       51772
242 Host_Reads_32MiB        0x0032   100   100   000    Old_age   Always       -       491593

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Abort offline test  Completed without error       00%     21429         -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

pas de température pour le SSD.

note : je viens de changer de driver NVIDIA pour tester. je suis repasser au 304.137 (au lieu du 340.104 (recommandé))

jajaX

pc en route depuis :

jaja@quadcore:~$ uptime
 23:46:12 up  8:46,  2 users,  load average: 1,40, 2,13, 1,64

RAS 🙂 mon changement de driver NVIDIA est bénéfique je pense. réponse dans les prochains jours....

jajaX

salut,

j'ai 2 redémarrages depuis l'autre jour. je pensais que c'était bon.

par précaution, j'avais activé lé démon de smartmontools.

et une fois rentré du taf, j'ai eu ce message =>

This message was generated by the smartd daemon running on:

host name: quadcore
DNS domain: [Empty]

The following warning/error was logged by the smartd daemon:

Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors

Device info:
ST2000LM003 HN-M201RAD, S/N:S321J9FFC00106, WWN:5-0004cf-20ec7fe1b, FW:2BC10001, 2.00 TB

For details see host's SYSLOG.

You can also use the smartctl utility for further investigation.
The original message about this issue was sent at Fri Feb 16 06:55:48 2018 CET
Another message will be sent in 24 hours if the problem persists.

si je regarde mon syslog, j'ai plein de truc comme ça =>

Feb 20 18:48:19 quadcore xdg-document-portal[19192]:    unique: 10507, success, outsize: 96
Feb 20 18:48:27 quadcore xdg-document-portal[19192]: unique: 10508, opcode: GETATTR (3), nodeid: 1, insize: 56, pid: 17994
Feb 20 18:48:27 quadcore xdg-document-portal[19192]:    unique: 10508, success, outsize: 120
Feb 20 18:48:27 quadcore xdg-document-portal[19192]: unique: 10509, opcode: STATFS (17), nodeid: 1, insize: 40, pid: 17994
Feb 20 18:48:27 quadcore xdg-document-portal[19192]:    unique: 10509, success, outsize: 96
Feb 20 18:48:35 quadcore xdg-document-portal[19192]: unique: 10510, opcode: STATFS (17), nodeid: 1, insize: 40, pid: 18010
Feb 20 18:48:35 quadcore xdg-document-portal[19192]:    unique: 10510, success, outsize: 96
Feb 20 18:48:43 quadcore xdg-document-portal[19192]: unique: 10511, opcode: STATFS (17), nodeid: 1, insize: 40, pid: 18032
Feb 20 18:48:43 quadcore xdg-document-portal[19192]:    unique: 10511, success, outsize: 96
Feb 20 18:48:51 quadcore xdg-document-portal[19192]: unique: 10512, opcode: STATFS (17), nodeid: 1, insize: 40, pid: 18052
Feb 20 18:48:51 quadcore xdg-document-portal[19192]:    unique: 10512, success, outsize: 96
Feb 20 18:48:59 quadcore xdg-document-portal[19192]: unique: 10513, opcode: STATFS (17), nodeid: 1, insize: 40, pid: 18112
Feb 20 18:48:59 quadcore xdg-document-portal[19192]:    unique: 10513, success, outsize: 96
Feb 20 18:49:07 quadcore xdg-document-portal[19192]: unique: 10514, opcode: STATFS (17), nodeid: 1, insize: 40, pid: 18138

par précaution, je viens de recommander un disque dur....

??

Bonsoir
On peut lancer une écriture pour réparer ce secteur illisible et voir si la réparation se passe bien

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Interrupted (host reset)      90%     18009         -
# 2  Short offline       Completed: read failure       90%     18009         [b]2424976416[/b]

A lire https://github.com/alexlarsson/xdg-document-portal/issues/29 puis comprendre https://www.mail-archive.com/kde-bugs-dist@kde.org/msg128361.html
https://bugs.launchpad.net/ubuntu/+source/psad/+bug/1711500

jajaX

salut,

merci de tes informations. je suis en usb avec un vieux disque dur là. le malade fait dodo en attendant qu'il soit cloné !

je verrais pour les réparations après, en espérant de ne pas avoir de soucis pendant la copie.

comble du hasard, je suis tombé sur ça aujourd'hui !

« Page précédente