😉
LeJediGris a écritSalut,
Et le retour d'un dmesg par exemple ?
A+
ça fait lourd, 800 lignes...
[ 0.000000] microcode: microcode updated early to revision 0x29, date = 2013-06-12
[ 0.000000] Linux version 4.9.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.80-2 (2018-02-09)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-5-amd64 root=UUID=640106ae-b108-485a-bb56-4184c850b1a8 ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000cabc3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cabc4000-0x00000000cac10fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cac11000-0x00000000cac1efff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cac1f000-0x00000000cac1ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cac20000-0x00000000cac3cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cac3d000-0x00000000cac41fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000cac42000-0x00000000cac4dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cac4e000-0x00000000cac6ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cac70000-0x00000000cacf0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cacf1000-0x00000000cacf5fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000cacf6000-0x00000000cacf6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cacf7000-0x00000000cacf7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cacf8000-0x00000000cad09fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cad0a000-0x00000000cad16fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cad17000-0x00000000cad19fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000cad1a000-0x00000000cad1bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cad1c000-0x00000000cad25fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000cad26000-0x00000000cad28fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cad29000-0x00000000cad6bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cad6c000-0x00000000caffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cb800000-0x00000000cf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000003ae5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.10 by American Megatrends
[ 0.000000] efi: SMBIOS=0xcad27c18 ACPI=0xcac11000 ACPI 2.0=0xcac11000 MPS=0xf4ca0
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP Compaq 8200 Elite SFF PC/1495, BIOS J01 v02.29 04/04/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3ae600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0CB800000 mask FFF800000 uncachable
[ 0.000000] 1 base 0CC000000 mask FFC000000 uncachable
[ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 base 3AE600000 mask FFFE00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f4c90-0x000f4c9f] mapped at [ffff8e71800f4c90]
[ 0.000000] Base memory trampoline at [ffff8e7180095000] 95000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] BRK [0xb9737000, 0xb9737fff] PGTABLE
[ 0.000000] BRK [0xb9738000, 0xb9738fff] PGTABLE
[ 0.000000] BRK [0xb9739000, 0xb9739fff] PGTABLE
[ 0.000000] BRK [0xb973a000, 0xb973afff] PGTABLE
[ 0.000000] BRK [0xb973b000, 0xb973bfff] PGTABLE
[ 0.000000] BRK [0xb973c000, 0xb973cfff] PGTABLE
[ 0.000000] BRK [0xb973d000, 0xb973dfff] PGTABLE
[ 0.000000] BRK [0xb973e000, 0xb973efff] PGTABLE
[ 0.000000] BRK [0xb973f000, 0xb973ffff] PGTABLE
[ 0.000000] BRK [0xb9740000, 0xb9740fff] PGTABLE
[ 0.000000] BRK [0xb9741000, 0xb9741fff] PGTABLE
[ 0.000000] BRK [0xb9742000, 0xb9742fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35d09000-0x36e7bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000CAC11000 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x00000000CAC11070 000064 (v01 HPQOEM SLIC-BPC 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CAC18C40 0000F4 (v04 HPQOEM SLIC-BPC 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CAC11168 007AD7 (v02 HPQOEM SLIC-BPC 00000008 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000CAD0EF80 000040
[ 0.000000] ACPI: APIC 0x00000000CAC18D38 000092 (v03 HPQOEM SLIC-BPC 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000CAC18DD0 0001D6 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 0x00000000CAC18FA8 00003C (v01 HPQOEM SLIC-BPC 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CAC18FE8 000038 (v01 HPQOEM SLIC-BPC 01072009 AMI. 00000004)
[ 0.000000] ACPI: ASF! 0x00000000CAC19020 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000CAC190C0 005270 (v01 COMPAQ WMI 00000001 MSFT 03000001)
[ 0.000000] ACPI: TCPA 0x00000000CAC1E330 000032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000003ae5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x3ae5f3000-0x3ae5f7fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000003ae5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff]
[ 0.000000] node 0: [mem 0x0000000040200000-0x00000000cabc3fff]
[ 0.000000] node 0: [mem 0x00000000cad6c000-0x00000000caffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000003ae5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000003ae5fffff]
[ 0.000000] On node 0 totalpages: 3641335
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 175 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12906 pages used for memmap
[ 0.000000] DMA32 zone: 825944 pages, LIFO batch:31
[ 0.000000] Normal zone: 43928 pages used for memmap
[ 0.000000] Normal zone: 2811392 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000cba00000-0x00000000cf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcabc4000-0xcac10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcac11000-0xcac1efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcac1f000-0xcac1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcac20000-0xcac3cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcac3d000-0xcac41fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcac42000-0xcac4dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcac4e000-0xcac6ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcac70000-0xcacf0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcacf1000-0xcacf5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcacf6000-0xcacf6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcacf7000-0xcacf7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcacf8000-0xcad09fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcad0a000-0xcad16fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcad17000-0xcad19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcad1a000-0xcad1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcad1c000-0xcad25fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcad26000-0xcad28fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcad29000-0xcad6bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcb7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb800000-0xcf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcfa00000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff8e752e200000 s105304 r8192 d29864 u262144
[ 0.000000] pcpu-alloc: s105304 r8192 d29864 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 3584262
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-5-amd64 root=UUID=640106ae-b108-485a-bb56-4184c850b1a8 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 14204388K/14565340K available (6201K kernel code, 1158K rwdata, 2864K rodata, 1408K init, 688K bss, 360952K reserved, 0K cma-reserved)
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:488 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 3391.543 MHz processor
[ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 6783.08 BogoMIPS (lpj=13566172)
[ 0.000023] pid_max: default: 32768 minimum: 301
[ 0.000036] ACPI: Core revision 20160831
[ 0.003142] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.003549] Security Framework initialized
[ 0.003550] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.003554] AppArmor: AppArmor disabled by boot time parameter
[ 0.004156] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.006471] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.007491] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.007502] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.007743] CPU: Physical Processor ID: 0
[ 0.007744] CPU: Processor Core ID: 0
[ 0.007748] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.007748] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.007750] mce: CPU supports 9 MCE banks
[ 0.007756] CPU0: Thermal monitoring enabled (TM1)
[ 0.007764] process: using mwait in idle threads
[ 0.007767] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.007767] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.007768] Spectre V2 mitigation: Vulnerable: Minimal generic ASM retpoline
[ 0.008067] Freeing SMP alternatives memory: 24K
[ 0.010305] ftrace: allocating 25230 entries in 99 pages
[ 0.019183] smpboot: Max logical packages: 2
[ 0.019351] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.020126] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059813] TSC deadline timer enabled
[ 0.059817] smpboot: CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.059819] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.059837] ... version: 3
[ 0.059837] ... bit width: 48
[ 0.059838] ... generic registers: 4
[ 0.059838] ... value mask: 0000ffffffffffff
[ 0.059839] ... max period: 00007fffffffffff
[ 0.059839] ... fixed-purpose events: 3
[ 0.059839] ... event mask: 000000070000000f
[ 0.060316] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.060394] x86: Booting SMP configuration:
[ 0.060394] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.078681] x86: Booted up 1 node, 8 CPUs
[ 0.078683] smpboot: Total of 8 processors activated (54264.68 BogoMIPS)
[ 0.084919] devtmpfs: initialized
[ 0.084974] x86/mm: Memory block size: 128MB
[ 0.087464] PM: Registering ACPI NVS region [mem 0xcabc4000-0xcac10fff] (315392 bytes)
[ 0.087471] PM: Registering ACPI NVS region [mem 0xcac1f000-0xcac1ffff] (4096 bytes)
[ 0.087472] PM: Registering ACPI NVS region [mem 0xcac4e000-0xcac6ffff] (139264 bytes)
[ 0.087475] PM: Registering ACPI NVS region [mem 0xcacf7000-0xcacf7fff] (4096 bytes)
[ 0.087475] PM: Registering ACPI NVS region [mem 0xcad0a000-0xcad16fff] (53248 bytes)
[ 0.087478] PM: Registering ACPI NVS region [mem 0xcad29000-0xcad6bfff] (274432 bytes)
[ 0.087487] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[ 0.087529] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.087539] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.087579] pinctrl core: initialized pinctrl subsystem
[ 0.087665] NET: Registered protocol family 16
[ 0.100509] cpuidle: using governor ladder
[ 0.116515] cpuidle: using governor menu
[ 0.116549] ACPI: bus type PCI registered
[ 0.116551] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.116629] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.116630] PCI: not using MMCONFIG
[ 0.116631] PCI: Using configuration type 1 for base access
[ 0.116668] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.136647] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.136828] ACPI: Added _OSI(Module Device)
[ 0.136829] ACPI: Added _OSI(Processor Device)
[ 0.136830] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.136830] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.136988] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.139683] ACPI: Dynamic OEM Table Load:
[ 0.139688] ACPI: SSDT 0xFFFF8E751D50E000 0006F4 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.139899] ACPI: Dynamic OEM Table Load:
[ 0.139901] ACPI: SSDT 0xFFFF8E751D967600 0000E4 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.140727] ACPI: Interpreter enabled
[ 0.140737] ACPI: (supports S0 S3 S4 S5)
[ 0.140738] ACPI: Using IOAPIC for interrupt routing
[ 0.140760] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.140801] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.140811] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.141079] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.145345] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.145348] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.145486] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.145766] PCI host bridge to bus 0000:00
[ 0.145768] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.145769] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.145769] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.145770] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.145771] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.145772] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.145773] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xffffffff window]
[ 0.145774] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.145779] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.145856] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[ 0.145862] pci 0000:00:02.0: reg 0x10: [mem 0xfe000000-0xfe3fffff 64bit]
[ 0.145866] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.145869] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.145960] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.145980] pci 0000:00:16.0: reg 0x10: [mem 0xfe42a000-0xfe42a00f 64bit]
[ 0.146052] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.146121] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
[ 0.146137] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7]
[ 0.146147] pci 0000:00:16.3: reg 0x14: [mem 0xfe429000-0xfe429fff]
[ 0.146277] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.146293] pci 0000:00:19.0: reg 0x10: [mem 0xfe400000-0xfe41ffff]
[ 0.146301] pci 0000:00:19.0: reg 0x14: [mem 0xfe428000-0xfe428fff]
[ 0.146311] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.146368] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.146404] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.146441] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.146458] pci 0000:00:1a.0: reg 0x10: [mem 0xfe427000-0xfe4273ff]
[ 0.146538] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.146575] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.146613] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.146628] pci 0000:00:1b.0: reg 0x10: [mem 0xfe420000-0xfe423fff 64bit]
[ 0.146688] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.146771] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.146937] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.146992] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.147043] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.147204] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.147260] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.147304] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[ 0.147474] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.147532] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.147579] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[ 0.147755] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.147813] pci 0000:00:1c.7: System wakeup disabled by ACPI
[ 0.147849] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.147866] pci 0000:00:1d.0: reg 0x10: [mem 0xfe426000-0xfe4263ff]
[ 0.147947] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.147984] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.148018] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.148093] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.148137] pci 0000:00:1f.0: [8086:1c4e] type 00 class 0x060100
[ 0.148402] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.148416] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.148425] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.148433] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.148442] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.148450] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.148458] pci 0000:00:1f.2: reg 0x24: [mem 0xfe425000-0xfe4257ff]
[ 0.148498] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.148566] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.148581] pci 0000:00:1f.3: reg 0x10: [mem 0xfe424000-0xfe4240ff 64bit]
[ 0.148601] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.148758] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.148856] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.148951] pci 0000:00:1c.6: PCI bridge to [bus 03]
[ 0.149049] pci 0000:00:1c.7: PCI bridge to [bus 04]
[ 0.149135] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.149145] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.149146] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.149147] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 0.149147] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.149148] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.149149] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.149151] pci 0000:00:1e.0: bridge window [mem 0xcfa00000-0xffffffff window] (subtractive decode)
[ 0.149700] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.149751] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.149796] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.149847] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.149896] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.149937] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.149987] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.150034] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.150111] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.150182] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.150183] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.150184] vgaarb: loaded
[ 0.150185] vgaarb: bridge control possible 0000:00:02.0
[ 0.150210] Registered efivars operations
[ 0.163671] PCI: Using ACPI for IRQ routing
[ 0.169409] PCI: pci_cache_line_size set to 64 bytes
[ 0.169470] e820: reserve RAM buffer [mem 0xcabc4000-0xcbffffff]
[ 0.169472] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.169473] e820: reserve RAM buffer [mem 0x3ae600000-0x3afffffff]
[ 0.169589] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.169593] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.171614] clocksource: Switched to clocksource hpet
[ 0.176157] VFS: Disk quotas dquot_6.6.0
[ 0.176183] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.176251] pnp: PnP ACPI init
[ 0.176352] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.176353] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.176354] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.176355] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.176356] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.176359] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.176448] system 00:01: [io 0x0620-0x063f] has been reserved
[ 0.176449] system 00:01: [io 0x0610-0x061f] has been reserved
[ 0.176451] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.176488] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.176527] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.176548] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.176585] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.176587] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.176760] pnp 00:06: [dma 0 disabled]
[ 0.176775] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.177084] pnp 00:07: [dma 1]
[ 0.177097] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.177134] pnp 00:08: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.177251] system 00:09: [io 0x0400-0x0453] has been reserved
[ 0.177252] system 00:09: [io 0x0458-0x047f] has been reserved
[ 0.177253] system 00:09: [io 0x1180-0x119f] has been reserved
[ 0.177254] system 00:09: [io 0x0500-0x057f] has been reserved
[ 0.177256] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.177257] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.177258] system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.177259] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 0.177260] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.177302] system 00:0a: [io 0x0454-0x0457] has been reserved
[ 0.177303] system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.177499] pnp: PnP ACPI: found 11 devices
[ 0.183806] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.183879] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.183906] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.183929] pci 0000:00:1c.6: PCI bridge to [bus 03]
[ 0.183952] pci 0000:00:1c.7: PCI bridge to [bus 04]
[ 0.183975] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.183986] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.183987] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.183988] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.183989] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.183990] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.183990] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.183991] pci_bus 0000:00: resource 10 [mem 0xcfa00000-0xffffffff window]
[ 0.183993] pci_bus 0000:05: resource 4 [io 0x0000-0x03af window]
[ 0.183993] pci_bus 0000:05: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.183994] pci_bus 0000:05: resource 6 [io 0x03b0-0x03df window]
[ 0.183995] pci_bus 0000:05: resource 7 [io 0x0d00-0xffff window]
[ 0.183996] pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.183997] pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.183998] pci_bus 0000:05: resource 10 [mem 0xcfa00000-0xffffffff window]
[ 0.184085] NET: Registered protocol family 2
[ 0.184257] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.184422] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.184543] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.184563] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.184603] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.184670] NET: Registered protocol family 1
[ 0.184682] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[ 0.184686] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.231741] PCI: CLS 64 bytes, default 64
[ 0.231776] Unpacking initramfs...
[ 0.464638] Freeing initrd memory: 17868K
[ 0.464643] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.464645] software IO TLB [mem 0xc6bc4000-0xcabc4000] (64MB) mapped at [ffff8e7246bc4000-ffff8e724abc3fff]
[ 0.465011] audit: initializing netlink subsys (disabled)
[ 0.465025] audit: type=2000 audit(1519133210.460:1): initialized
[ 0.465356] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 0.465435] zbud: loaded
[ 0.466080] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.466109] io scheduler noop registered
[ 0.466110] io scheduler deadline registered
[ 0.466121] io scheduler cfq registered (default)
[ 0.467069] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.467078] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[ 0.467110] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.467118] pcie_pme 0000:00:1c.4:pcie001: service driver pcie_pme loaded
[ 0.467146] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
[ 0.467154] pcie_pme 0000:00:1c.6:pcie001: service driver pcie_pme loaded
[ 0.467183] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
[ 0.467191] pcie_pme 0000:00:1c.7:pcie001: service driver pcie_pme loaded
[ 0.467199] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.467203] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.467210] efifb: probing for efifb
[ 0.467219] efifb: framebuffer at 0xd0000000, using 1920k, total 1920k
[ 0.467219] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 0.467219] efifb: scrolling: redraw
[ 0.467220] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.468079] Console: switching to colour frame buffer device 100x37
[ 0.468837] fb0: EFI VGA frame buffer device
[ 0.468847] intel_idle: MWAIT substates: 0x1120
[ 0.468848] intel_idle: v0.4.1 model 0x2A
[ 0.469065] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.469718] GHES: HEST is not enabled!
[ 0.469767] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.491048] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.511948] 0000:00:16.3: ttyS1 at I/O 0xf0e0 (irq = 17, base_baud = 115200) is a 16550A
[ 0.512078] Linux agpgart interface v0.103
[ 0.591799] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[ 1.071897] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
[ 1.071920] tpm tpm0: TPM is disabled/deactivated (0x7)
[ 1.072043] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.072043] AMD IOMMUv2 functionality not available on this system
[ 1.072613] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.076034] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.076038] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.076269] mousedev: PS/2 mouse device common for all mice
[ 1.076322] rtc_cmos 00:04: RTC can wake from S4
[ 1.076637] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.076690] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.076699] intel_pstate: Intel P-state driver initializing
[ 1.077465] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.078388] NET: Registered protocol family 10
[ 1.078811] mip6: Mobile IPv6
[ 1.078814] NET: Registered protocol family 17
[ 1.078818] mpls_gso: MPLS GSO support
[ 1.079244] microcode: sig=0x206a7, pf=0x2, revision=0x29
[ 1.079460] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.079670] registered taskstats version 1
[ 1.079694] zswap: loaded using pool lzo/zbud
[ 1.105299] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.143950] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
[ 1.143994] ima: No TPM chip found, activating TPM-bypass!
[ 1.144480] rtc_cmos 00:04: setting system clock to 2018-02-20 13:26:52 UTC (1519133212)
[ 1.144599] PM: Hibernation image not present or could not be loaded.
[ 1.146413] Freeing unused kernel memory: 1408K
[ 1.146414] Write protecting the kernel read-only data: 12288k
[ 1.147137] Freeing unused kernel memory: 1976K
[ 1.151197] Freeing unused kernel memory: 1232K
[ 1.159054] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.180479] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.180578] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.180592] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.181748] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.181790] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.183240] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.183318] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.183338] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.183727] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.183800] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.219683] pps_core: LinuxPPS API ver. 1 registered
[ 1.219685] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.220034] PTP clock support registered
[ 1.221714] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.221714] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.221823] ACPI: bus type USB registered
[ 1.221860] usbcore: registered new interface driver usbfs
[ 1.221878] usbcore: registered new interface driver hub
[ 1.221925] usbcore: registered new device driver usb
[ 1.221947] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.222661] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.223067] ehci-pci: EHCI PCI platform driver
[ 1.223793] SCSI subsystem initialized
[ 1.225375] libata version 3.00 loaded.
[ 1.230432] AVX version of gcm_enc/dec engaged.
[ 1.230434] AES CTR mode by8 optimization enabled
[ 1.329144] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.436694] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 08:2e:5f:25:34:36
[ 1.436696] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.436750] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF
[ 1.436995] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.437004] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.437019] ehci-pci 0000:00:1a.0: debug port 2
[ 1.438356] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 1.440949] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.440969] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe427000
[ 1.455975] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.456031] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.456033] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.456035] usb usb1: Product: EHCI Host Controller
[ 1.456036] usb usb1: Manufacturer: Linux 4.9.0-5-amd64 ehci_hcd
[ 1.456037] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.456336] hub 1-0:1.0: USB hub found
[ 1.456344] hub 1-0:1.0: 3 ports detected
[ 1.456673] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.456679] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.456699] ehci-pci 0000:00:1d.0: debug port 2
[ 1.460604] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.460618] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe426000
[ 1.471968] tsc: Refined TSC clocksource calibration: 3392.296 MHz
[ 1.471978] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5e08003f, max_idle_ns: 440795205735 ns
[ 1.476002] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.476051] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.476053] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.476055] usb usb2: Product: EHCI Host Controller
[ 1.476056] usb usb2: Manufacturer: Linux 4.9.0-5-amd64 ehci_hcd
[ 1.476057] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.476333] hub 2-0:1.0: USB hub found
[ 1.476340] hub 2-0:1.0: 3 ports detected
[ 1.476588] i801_smbus 0000:00:1f.3: enabling device (0101 -> 0103)
[ 1.476726] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.477873] ahci 0000:00:1f.2: version 3.0
[ 1.478103] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x15 impl SATA mode
[ 1.478106] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
[ 1.501159] scsi host0: ahci
[ 1.501591] scsi host1: ahci
[ 1.502016] scsi host2: ahci
[ 1.502364] scsi host3: ahci
[ 1.502586] scsi host4: ahci
[ 1.502787] scsi host5: ahci
[ 1.502862] ata1: SATA max UDMA/133 abar m2048@0xfe425000 port 0xfe425100 irq 29
[ 1.502863] ata2: DUMMY
[ 1.502868] ata3: SATA max UDMA/133 abar m2048@0xfe425000 port 0xfe425200 irq 29
[ 1.502868] ata4: DUMMY
[ 1.502874] ata5: SATA max UDMA/133 abar m2048@0xfe425000 port 0xfe425300 irq 29
[ 1.502874] ata6: DUMMY
[ 1.784045] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.804049] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.819403] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.819429] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.819459] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.821002] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.821104] ata1.00: supports DRM functions and may not be fully accessible
[ 1.821921] ata1.00: disabling queued TRIM support
[ 1.821924] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT03B6Q, max UDMA/133
[ 1.821926] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.821976] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.821979] ata3.00: ATAPI: hp DVD A DH16ABSH, YHDF, max UDMA/100
[ 1.822599] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.822703] ata1.00: supports DRM functions and may not be fully accessible
[ 1.823040] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.823045] ata3.00: configured for UDMA/100
[ 1.823360] ata1.00: disabling queued TRIM support
[ 1.823853] ata1.00: configured for UDMA/133
[ 1.824320] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 3B6Q PQ: 0 ANSI: 5
[ 1.868202] scsi 2:0:0:0: CD-ROM hp DVD A DH16ABSH YHDF PQ: 0 ANSI: 5
[ 1.884336] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.884387] sd 0:0:0:0: [sda] Write Protect is off
[ 1.884389] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.884404] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.887438] sda: sda1 sda2
[ 1.887790] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.901175] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.901177] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.901383] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.936750] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.936753] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.937154] hub 1-1:1.0: USB hub found
[ 1.937302] hub 1-1:1.0: 6 ports detected
[ 1.952617] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.952620] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.953140] hub 2-1:1.0: USB hub found
[ 1.953292] hub 2-1:1.0: 8 ports detected
[ 2.010948] random: fast init done
[ 2.224157] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 2.240137] usb 2-1.7: new low-speed USB device number 3 using ehci-pci
[ 2.334091] usb 1-1.1: New USB device found, idVendor=152d, idProduct=0578
[ 2.334094] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.334095] usb 1-1.1: Product: USB to ATA/ATAPI Bridge
[ 2.334097] usb 1-1.1: Manufacturer: JMicron
[ 2.334107] usb 1-1.1: SerialNumber: 0123456789ABCDEF
[ 2.337004] usbcore: registered new interface driver usb-storage
[ 2.337854] scsi host6: uas
[ 2.338010] usbcore: registered new interface driver uas
[ 2.338717] scsi 6:0:0:0: Direct-Access JMicron Generic 0203 PQ: 0 ANSI: 6
[ 2.353876] usb 2-1.7: New USB device found, idVendor=046d, idProduct=c408
[ 2.353888] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.353889] usb 2-1.7: Product: USB Trackball
[ 2.353891] usb 2-1.7: Manufacturer: Logitech
[ 2.356266] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.359732] usbcore: registered new interface driver usbhid
[ 2.359733] usbhid: USB HID core driver
[ 2.360643] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/0003:046D:C408.0001/input/input3
[ 2.360744] hid-generic 0003:046D:C408.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1d.0-1.7/input0
[ 2.385139] sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 2.385142] sd 6:0:0:0: [sdb] 4096-byte physical blocks
[ 2.386636] sd 6:0:0:0: [sdb] Write Protect is off
[ 2.386639] sd 6:0:0:0: [sdb] Mode Sense: 5f 00 00 08
[ 2.387389] sd 6:0:0:0: [sdb] Disabling FUA
[ 2.387392] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.391879] sdb: sdb1
[ 2.394229] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 2.416164] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[ 2.496415] clocksource: Switched to clocksource tsc
[ 2.526283] usb 1-1.2: New USB device found, idVendor=152d, idProduct=0578
[ 2.526286] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.526288] usb 1-1.2: Product: USB to ATA/ATAPI Bridge
[ 2.526298] usb 1-1.2: Manufacturer: JMicron
[ 2.526299] usb 1-1.2: SerialNumber: 0123456789ABCDEF
[ 2.527319] scsi host7: uas
[ 2.528291] scsi 7:0:0:0: Direct-Access JMicron Generic 0203 PQ: 0 ANSI: 6
[ 2.560888] sd 7:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.560890] sd 7:0:0:0: [sdc] 4096-byte physical blocks
[ 2.561886] sd 7:0:0:0: [sdc] Write Protect is off
[ 2.561889] sd 7:0:0:0: [sdc] Mode Sense: 5f 00 00 08
[ 2.562380] sd 7:0:0:0: [sdc] Disabling FUA
[ 2.562382] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.566020] sdc: sdc1
[ 2.568391] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 2.604186] usb 1-1.3: new high-speed USB device number 5 using ehci-pci
[ 2.737831] usb 1-1.3: New USB device found, idVendor=14cd, idProduct=6116
[ 2.737834] usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 2.737835] usb 1-1.3: Product: USB Mass Storage Device
[ 2.737837] usb 1-1.3: Manufacturer: Generic
[ 2.737838] usb 1-1.3: SerialNumber: 116AC2101219
[ 2.738264] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 2.738544] scsi host8: usb-storage 1-1.3:1.0
[ 2.816271] usb 1-1.4: new high-speed USB device number 6 using ehci-pci
[ 2.928809] usb 1-1.4: New USB device found, idVendor=1bcf, idProduct=0c31
[ 2.928812] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.928813] usb 1-1.4: Product: USB to Serial-ATA bridge
[ 2.928815] usb 1-1.4: Manufacturer: Sunplus Innovation Technology
[ 2.928817] usb 1-1.4: SerialNumber: FF500FF000000000000000F372FEFF
[ 2.930817] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 2.931078] scsi host9: usb-storage 1-1.4:1.0
[ 3.008258] usb 1-1.5: new low-speed USB device number 7 using ehci-pci
[ 3.745464] scsi 8:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0
[ 3.746874] sd 8:0:0:0: [sdd] 62533294 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 3.747536] sd 8:0:0:0: [sdd] Write Protect is off
[ 3.747541] sd 8:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 3.748157] sd 8:0:0:0: [sdd] No Caching mode page found
[ 3.748218] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[ 3.752824] sdd: sdd1
[ 3.755163] sd 8:0:0:0: [sdd] Attached SCSI disk
[ 3.940662] scsi 9:0:0:0: Direct-Access ST500LM0 00-1EJ162 0200 PQ: 0 ANSI: 4
[ 3.942352] sd 9:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 3.949411] sd 9:0:0:0: [sde] Write Protect is off
[ 3.949414] sd 9:0:0:0: [sde] Mode Sense: 38 00 00 00
[ 3.956473] sd 9:0:0:0: [sde] No Caching mode page found
[ 3.956533] sd 9:0:0:0: [sde] Assuming drive cache: write through
[ 3.983868] sde: sde1
[ 4.002919] sd 9:0:0:0: [sde] Attached SCSI disk
[ 4.426626] usb 1-1.5: New USB device found, idVendor=0463, idProduct=ffff
[ 4.426629] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 4.426631] usb 1-1.5: Product: PROTECTIONCENTER
[ 4.426632] usb 1-1.5: Manufacturer: MGE OPS SYSTEMS
[ 4.426634] usb 1-1.5: SerialNumber: 000000000
[ 4.679786] hid-generic 0003:0463:FFFF.0002: hiddev0,hidraw1: USB HID v1.00 Device [MGE OPS SYSTEMS PROTECTIONCENTER] on usb-0000:00:1a.0-1.5/input0
[ 4.756700] usb 1-1.6: new high-speed USB device number 8 using ehci-pci
[ 4.869975] usb 1-1.6: New USB device found, idVendor=04b8, idProduct=082b
[ 4.869978] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.869980] usb 1-1.6: Product: USB2.0 MFP(Hi-Speed)
[ 4.869981] usb 1-1.6: Manufacturer: EPSON
[ 4.869983] usb 1-1.6: SerialNumber: 007030610041943390
[ 4.875388] usb-storage 1-1.6:1.2: USB Mass Storage device detected
[ 4.875823] scsi host10: usb-storage 1-1.6:1.2
[ 5.892780] scsi 10:0:0:0: Direct-Access EPSON Stylus Storage 1.00 PQ: 0 ANSI: 2
[ 5.902402] sd 10:0:0:0: [sdf] Attached SCSI removable disk
[ 8.308131] random: crng init done
[ 32.629736] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 32.703257] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 32.726699] efivars: duplicate variable: SlotPresent-ec87d643-eba4-4bb5-a1e5-3f3e36b20da9
[ 32.730574] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 32.730746] systemd[1]: Detected architecture x86-64.
[ 32.730905] systemd[1]: Set hostname to <debian-fixe>.
[ 32.780620] systemd[1]: nut-monitor.service: Cannot add dependency job, ignoring: Unit nut-monitor.service is masked.
[ 32.780630] systemd[1]: nut-server.service: Cannot add dependency job, ignoring: Unit nut-server.service is masked.
[ 32.781138] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 32.781188] systemd[1]: Reached target User and Group Name Lookups.
[ 32.781199] systemd[1]: Reached target Swap.
[ 32.781244] systemd[1]: Listening on Journal Socket.
[ 32.781372] systemd[1]: Created slice User and Session Slice.
[ 32.789199] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 32.792785] lp: driver loaded but no devices found
[ 32.794679] ppdev: user-space parallel port driver
[ 32.796066] parport_pc 00:07: reported by Plug and Play ACPI
[ 32.796217] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 32.823668] systemd-journald[404]: Received request to flush runtime journal from PID 1
[ 32.845961] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 32.845965] ACPI: Power Button [PWRB]
[ 32.846023] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 32.846025] ACPI: Power Button [PWRF]
[ 32.854068] wmi: Mapper loaded
[ 32.862130] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 32.866222] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 32.866263] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 32.866305] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 32.866358] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 32.866425] sd 8:0:0:0: Attached scsi generic sg4 type 0
[ 32.866479] sd 9:0:0:0: Attached scsi generic sg5 type 0
[ 32.866522] sd 10:0:0:0: Attached scsi generic sg6 type 0
[ 32.868206] [drm] Initialized
[ 32.894949] lp0: using parport0 (interrupt-driven).
[ 32.899154] EFI Variables Facility v0.08 2004-May-17
[ 32.899887] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 32.906243] efivars: duplicate variable: SlotPresent-ec87d643-eba4-4bb5-a1e5-3f3e36b20da9
[ 32.927510] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 32.927512] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 32.927512] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 32.927513] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 32.929067] pstore: using zlib compression
[ 32.929081] pstore: Registered efi as persistent store backend
[ 32.929439] usblp 1-1.6:1.1: usblp1: USB Bidirectional printer dev 8 if 1 alt 0 proto 2 vid 0x04B8 pid 0x082B
[ 32.929459] usbcore: registered new interface driver usblp
[ 32.942862] snd_hda_intel 0000:00:1b.0: enabling device (0100 -> 0102)
[ 32.943950] [drm] Memory usable by graphics device = 2048M
[ 32.943953] checking generic (d0000000 1e0000) vs hw (d0000000 10000000)
[ 32.943954] fb: switching to inteldrmfb from EFI VGA
[ 32.943988] Console: switching to colour dummy device 80x25
[ 32.944441] [drm] Replacing VGA console driver
[ 32.944614] i801_smbus 0000:00:1f.3: BIOS is accessing SMBus registers
[ 32.944619] i801_smbus 0000:00:1f.3: Driver SMBus register access inhibited
[ 32.949481] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 32.949482] [drm] Driver supports precise vblank timestamp query.
[ 32.951320] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 32.952941] kvm: disabled by bios
[ 32.955516] intel_rapl: Found RAPL domain package
[ 32.955518] intel_rapl: Found RAPL domain core
[ 32.955519] intel_rapl: Found RAPL domain uncore
[ 32.955524] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 32.955527] iTCO_vendor_support: vendor-support=0
[ 32.955898] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 32.955930] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 32.956077] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 32.958918] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 32.958920] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 32.958922] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 32.958923] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 32.958924] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 32.958926] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 32.958927] snd_hda_codec_realtek hdaudioC0D0: Line=0x18
[ 32.959932] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 32.961648] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 32.979664] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 32.980464] fbcon: inteldrmfb (fb0) is primary device
[ 33.003536] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 33.003587] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 33.003628] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 33.003668] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 33.003706] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 33.062780] Console: switching to colour frame buffer device 240x67
[ 33.082737] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 33.182866] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[ 33.419593] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
[ 34.809131] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 34.844140] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 35.355992] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 35.599824] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 39.278408] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 39.278453] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 40.160190] usblp1: removed
[ 40.167759] usblp 1-1.6:1.1: usblp1: USB Bidirectional printer dev 8 if 1 alt 0 proto 2 vid 0x04B8 pid 0x082B
Tu trouves des anomalies "explicables" et surtout, rectifiables ?
Merci pour ton retour 🙂
