Ce site est optimisé pour être consulté depuis un navigateur moderne dans lequel JavaScript est activé.

Clé USB SanDisk Cruzer Blade 64Go morte ?

Mema

Bonjour,
J'ai une clé USB SanDisk Cruzer Blade de 64Go qui m'a l'air morte mais je voudrais en être sûr.

Un lsusb me donne ça (c'est la SanDisk) :

mael@mael-Latitude-E6430:~$ lsusb
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 0c45:6449 Microdia 
Bus 001 Device 011: ID 0781:5530 SanDisk Corp. Cruzer
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
mael@mael-Latitude-E6430:~$

Un fidsk -l me donne ça :

mael@mael-Latitude-E6430:~$ sudo fdisk -l
%% info sur mon DD interne....

Disque /dev/sdb : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
mael@mael-Latitude-E6430:~$

C'est là où ça m'inquiète : elle est censé faire 64Go or là ils indiquent 64MiB, et on ne peut pas la monter... Y a-t-il encore un peu d'espoir ?

Merci beaucoup pour votre aide !
Pour info je suis sous ubuntu 16.04.

shoot76

Salut,

Est-ce qu'à tout hasard tu aurais réalisé une commande "dd" dessus? Tu peux regarder ta clé avec gparted pour voir si un système de fichier est reconnu.

Quel est le retour de

lsblk

erresse

Bonjour,
À mon avis, ta clé n'a pas de table de partition, donc aucun volume à monter. Elle a peut-être été écrasée ou n'a jamais été partitionné...
Regarde dans Gparted si tu trouves cette clé dans la liste des périphériques et, si oui, choisis dans le menu "Périphérique" l'option "Créer une table de partition" : Crée une table de type MSDOS sur ta clé, et applique immédiatement la commande.
Ensuite, tu devrais voir toute la taille de ta clé (pas forcément 64Go, il y a de la perte) en "espace non alloué". Dans le menu "Partition", prends l'option "Créer une partition" et paramètre-la pour occuper toute la surface disponible, en format FAT32.
Applique à nouveau la commande et ta clé devrait alors pouvoir se monter...

Mema

Salut !
Qu'entends-tu par 'une commande "dd"' ?
Malheureusement gparted ne reconnait pas le clé et lsblk non plus :

mael@mael-Latitude-E6430:~$ lsblk
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sr0     11:0    1  1024M  0 rom  
sda      8:0    0 465,8G  0 disk 
├─sda2   8:2    0  10,3G  0 part 
├─sda7   8:7    0  48,1G  0 part /
├─sda5   8:5    0   300G  0 part /media/documents
├─sda3   8:3    0 105,4G  0 part 
├─sda1   8:1    0  39,2M  0 part 
└─sda6   8:6    0   1,9G  0 part [SWAP]
mael@mael-Latitude-E6430:~$

Une chose : au bout d'un moment, la clé ne s'affiche même plus sous lsusb, comme si elle s'étaignait au bout d'un moment :o

shoot76

Si tu m'autorises à formater ta clé ... voici les commandes que tu peux tenter :

1ere étape : créer une table de partition :

sudo fdisk /dev/sdb

Là tu vas avoir une page un peu "batarde".

Il faut taper "N" pour créer une nouvelle table. Puis "p" pour sélectionner une table primaire. Puis 1 pour créer une seule partition. Puis entrée deux fois pour prendre les secteurs d'amorçage et de fin. Enfin, tu peux appuyer sur w pour écrire et quitter.

Maintenant que tu as une table prête, tu peux formater ta clé (en fat32 ici) :

sudo mkfs.vfat -F 32 /dev/sdb1

Nasman

Je pense que les informations de taille de la clé sont indépendante du contenu de cette dernière (dont une table des partitions peut être considérée comme du contenu).
On peut à la rigueur tenter un "nettoyage" avec dd mais si elle se déconnecte ce peut être risqué (des fois qu'un autre média serait aussi branché).
Genre :
- disque dur interne sda
- clé sdb
- disque externe sdc

Si sdb disparait (la clé) au moment où on utilise dd pour l'effacer, on risque d'effacer le disque externe (qui deviendrait à ce moment sdb)

??

Bonjour
Tu peux essayer de débrancher la clé, d'attendre 20 secondes, de rebrancher la clé et d'attendre 20 secondes puis d'indiquer comment le dialogue de reconnaissance c'est passé via la commande

dmesg | tail -20

Tu posteras le résultat
Je ne serais pas surpris de voir que le firmware de la clé a indiqué qu' elle avait maintenant une capacité de 64 Mo

Mema

Merci pour votre aide !!
@shoot76 : j'ai bien peur que le problème soit hardware... En effet quand je branche la clé et que j'effectue un lsusb, elle apparaît. Si j'attends quelques secondes et que je refais un lsusb, elle a disparu...
Du coup j'ai essayé créer la table le plus rapidement possible avec fdisk, mais après avoir écrit les modifications, la clé avait disparu...

@?? : voilà ce que j'obtiens 20 secondes après le branchement de la clé :

mael@mael-Latitude-E6430:~$ dmesg | tail -20
[11297.110357] usb 3-1: SerialNumber: 0123456789ABCDEF
[11297.111260] usb-storage 3-1:1.0: USB Mass Storage device detected
[11297.111587] scsi host6: usb-storage 3-1:1.0
[11298.129831] scsi 6:0:0:0: Direct-Access     SanDisk  Firebird         1.07 PQ: 0 ANSI: 2
[11298.130730] sd 6:0:0:0: Attached scsi generic sg2 type 0
[11298.130871] sd 6:0:0:0: [sdb] 131072 512-byte logical blocks: (67.1 MB/64.0 MiB)
[11298.131216] sd 6:0:0:0: [sdb] Write Protect is off
[11298.131227] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[11298.131480] sd 6:0:0:0: [sdb] No Caching mode page found
[11298.131491] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[11298.209648] sd 6:0:0:0: ioctl_internal_command return code = 8070000
[11298.209654] sd 6:0:0:0: Sense Key : Hardware Error [current] 
[11298.209657] sd 6:0:0:0: Add. Sense: No additional sense information
[11298.213980] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[11298.297564] sd 6:0:0:0: ioctl_internal_command return code = 8070000
[11298.297570] sd 6:0:0:0: Sense Key : Hardware Error [current] 
[11298.297573] sd 6:0:0:0: Add. Sense: No additional sense information
[11298.577595] sd 6:0:0:0: ioctl_internal_command return code = 8070000
[11298.577601] sd 6:0:0:0: Sense Key : Hardware Error [current] 
[11298.577604] sd 6:0:0:0: Add. Sense: No additional sense information
mael@mael-Latitude-E6430:~$

??

[11297.111260] usb-storage 3-1:1.0: USB Mass Storage device detected
[11297.111587] scsi host6: usb-storage 3-1:1.0
[11298.129831] scsi 6:0:0:0: Direct-Access SanDisk Firebird 1.07 PQ: 0 ANSI: 2
[11298.130730] sd 6:0:0:0: Attached scsi generic sg2 type 0
[11298.130871] sd 6:0:0:0: [sdb] 131072 512-byte logical blocks: (67.1 MB/64.0 MiB)
[11298.131216] sd 6:0:0:0: [sdb] Write Protect is off

Je découvre le vrai nom de ta clé http://forums.sandisk.com/t5/All-SanDisk-USB-Flash-Drives/Firebird-16gb-flash-drive-now-shows-only-64mb/td-p/337526

Let me share to you what I have experienced and the solution.
I have the same 16gb and I accidentally nuke it. When I plug it in on my other laptop it shows 64mb and I am not able to reformat. So here's what I did.

1. Usb must be plug in.
2. I downloaded EaseUS data recovery and run it.
3. Select the unallocated data storage.
4. once done no need to hit on recover or anything.
5. close EaseUS data recovery
6. unplug/replug the USB
7. goto disk management on your windows
8. promt will show up.
8. now you should see the 14gb unallocated data
9. On the prompt it will ask you to format the unallocated space. no changes needed just hit on next and proceed with it.
10. Done. USB should be fix

??

Mema a écritMerci pour votre aide !!
@shoot76 : j'ai bien peur que le problème soit hardware... En effet quand je branche la clé et que j'effectue un lsusb, elle apparaît. Si j'attends quelques secondes et que je refais un lsusb, elle a disparu...
Du coup j'ai essayé créer la table le plus rapidement possible avec fdisk, mais après avoir écrit les modifications, la clé avait disparu..

Donc sans toucher à rien, donnes

dmesg | tail -200

Mema

Salut !
Voilà le resultat d'un dmesg quand ma clé disparaît quelques secondes après être branché (j'ai mis que la fin) :

[   52.109795] wlp3s0: authenticate with 00:19:70:a7:17:4f
[   52.156848] wlp3s0: send auth to 00:19:70:a7:17:4f (try 1/3)
[   52.159398] wlp3s0: authenticated
[   52.160053] wlp3s0: associate with 00:19:70:a7:17:4f (try 1/3)
[   52.164167] wlp3s0: RX AssocResp from 00:19:70:a7:17:4f (capab=0x431 status=0 aid=4)
[   52.169724] wlp3s0: associated
[   52.169776] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[  720.138255] usb 3-1: new high-speed USB device number 7 using xhci_hcd
[  720.279303] usb 3-1: New USB device found, idVendor=0781, idProduct=5530
[  720.279308] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  720.279311] usb 3-1: Product: Firebird6Sp9
[  720.279314] usb 3-1: Manufacturer: SanDisk Corporation
[  720.279316] usb 3-1: SerialNumber: 0123456789ABCDEF
[  720.280117] usb-storage 3-1:1.0: USB Mass Storage device detected
[  720.280373] scsi host6: usb-storage 3-1:1.0
[  721.310821] scsi 6:0:0:0: Direct-Access     SanDisk  Firebird         1.07 PQ: 0 ANSI: 2
[  721.311532] sd 6:0:0:0: Attached scsi generic sg2 type 0
[  721.311706] sd 6:0:0:0: [sdb] 131072 512-byte logical blocks: (67.1 MB/64.0 MiB)
[  721.311927] sd 6:0:0:0: [sdb] Write Protect is off
[  721.311931] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[  721.312147] sd 6:0:0:0: [sdb] No Caching mode page found
[  721.312154] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  721.394505] sd 6:0:0:0: ioctl_internal_command return code = 8070000
[  721.394508] sd 6:0:0:0: Sense Key : Hardware Error [current] 
[  721.394509] sd 6:0:0:0: Add. Sense: No additional sense information
[  721.398097] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[  721.478595] sd 6:0:0:0: ioctl_internal_command return code = 8070000
[  721.478601] sd 6:0:0:0: Sense Key : Hardware Error [current] 
[  721.478604] sd 6:0:0:0: Add. Sense: No additional sense information
[  721.754705] sd 6:0:0:0: ioctl_internal_command return code = 8070000
[  721.754712] sd 6:0:0:0: Sense Key : Hardware Error [current] 
[  721.754715] sd 6:0:0:0: Add. Sense: No additional sense information
[  721.838524] sd 6:0:0:0: ioctl_internal_command return code = 8070000
[  721.838530] sd 6:0:0:0: Sense Key : Hardware Error [current] 
[  721.838533] sd 6:0:0:0: Add. Sense: No additional sense information
[  736.086457] usb 3-1: reset high-speed USB device number 7 using xhci_hcd
[  736.206254] usb 3-1: device descriptor read/64, error -71
[  736.434213] usb 3-1: device descriptor read/64, error -71
[  736.662184] usb 3-1: reset high-speed USB device number 7 using xhci_hcd
[  736.782273] usb 3-1: device descriptor read/64, error -71
[  737.010275] usb 3-1: device descriptor read/64, error -71
[  737.238332] usb 3-1: reset high-speed USB device number 7 using xhci_hcd
[  737.238465] usb 3-1: Device not responding to setup address.
[  737.446338] usb 3-1: Device not responding to setup address.
[  737.654232] usb 3-1: device not accepting address 7, error -71
[  737.774251] usb 3-1: reset high-speed USB device number 7 using xhci_hcd
[  737.774399] usb 3-1: Device not responding to setup address.
[  737.982287] usb 3-1: Device not responding to setup address.
[  738.190187] usb 3-1: device not accepting address 7, error -71
[  738.190384] usb 3-1: USB disconnect, device number 7
[  738.370217] usb 3-1: new high-speed USB device number 8 using xhci_hcd
[  738.490172] usb 3-1: device descriptor read/64, error -71
[  738.718293] usb 3-1: device descriptor read/64, error -71
[  739.214175] usb 3-1: new full-speed USB device number 9 using xhci_hcd
[  739.334217] usb 3-1: device descriptor read/64, error -71
[  739.562158] usb 3-1: device descriptor read/64, error -71
[  739.790190] usb 3-1: new full-speed USB device number 10 using xhci_hcd
[  739.790243] usb 3-1: Device not responding to setup address.
[  739.998244] usb 3-1: Device not responding to setup address.
[  740.206201] usb 3-1: device not accepting address 10, error -71
[  741.218209] usb 3-1: new high-speed USB device number 11 using xhci_hcd
[  741.218349] usb 3-1: Device not responding to setup address.
[  741.426274] usb 3-1: Device not responding to setup address.
[  741.634163] usb 3-1: device not accepting address 11, error -71
[  741.634216] usb usb3-port1: unable to enumerate USB device
mael@mael-Latitude-E6430:~$

A part ça je suis passé sous windows essayer le truc avec diskpart que j'ai vu sur le forum dont tu as donné le lien, sans succès (la clé est listée dans diskpart comme faisant 0 octet donc impossible de formateur ni rien...)

??

Si ta clé est encore sous garantie....
sinon on va essayer de regarder ce message

device descriptor read/64, error -71

Mema

Non, la clé a deux ans et demi :/
Tu sais ce que ce message signifie ?

??

Aucune idée de la vraie signification du message
En conséquence, tout le monde indique que le périphérique est fichu..... Ce qui résout le problème.
J'ai malgré tout trouvé une exception. Comme ta clé n'est plus sous garantie, tu peux essayer. C'est réversible.
Dans le net j'ai trouvé cela

http://www.linux-usb.org/FAQ.html a écritQ: My device stopped working in 2.6.10, what can I do?

A:In the 2.6.10 kernel the method of enumerating devices was changed to follow a similar algorithm as Windows (while the standard allows both many devices require the Windows method). It seems some devices do not like this new method though. If you have started having a problem since this kernel with some of your devices you might want to use the option "old_scheme_first=y" with the usbcore module.

Je te propose donc les commandes suivantes

https://www.guyrutenberg.com/2008/06/26/usb-1-4-device-descriptor-read64-error-71/ a écritsudo cp /sys/module/usbcore/parameters/old_scheme_first /sys/module/usbcore/parameters/old_scheme_first.SAVE
sudo echo Y > /sys/module/usbcore/parameters/old_scheme_first

Il est nécessaire de rebooter pour prise en compte

Tu referas un essai et tu attendras environ une minute après avoir branché la clé avant de redonner le résultat de

dmesg | tail -200

Mema

J'ai fait ce que tu as dit, voici la capture de console. J'ai tout mis cette fois-ci, mais il n'y a que la fin d'utile je pense.

mael@mael-Latitude-E6430:~$ dmesg | tail -200
[    1.821924] input: YSTEK USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0E8F:00FB.0001/input/input8
[    1.822007] hid-generic 0003:0E8F:00FB.0001: input,hidraw0: USB HID v1.10 Mouse [YSTEK USB Mouse] on usb-0000:00:1a.0-1.2/input0
[    1.841443] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.841446] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.841447] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.841580] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    1.843121] ata1.00: ATA-8: WDC WD5000BPKT-75PK4T0, 01.01A01, max UDMA/133
[    1.843122] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.845013] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.845015] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.845016] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.846074] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    1.847606] ata1.00: configured for UDMA/133
[    1.847860] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000BPKT-7 1A01 PQ: 0 ANSI: 5
[    1.892062] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[    1.896213] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.896222] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.896224] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.896235] sd 0:0:0:0: [sda] Write Protect is off
[    1.896237] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.896252] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.946982]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[    1.947651] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.979750] tsc: Refined TSC clocksource calibration: 2591.589 MHz
[    1.979756] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255b32af41a, max_idle_ns: 440795337217 ns
[    2.004030] usb 1-1.4: New USB device found, idVendor=413c, idProduct=8197
[    2.004032] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.004033] usb 1-1.4: Product: BCM20702A0
[    2.004041] usb 1-1.4: Manufacturer: Broadcom Corp
[    2.004042] usb 1-1.4: SerialNumber: 20689D648940
[    2.084054] usb 1-1.5: new high-speed USB device number 5 using ehci-pci
[    2.210401] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.212081] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU70N, A102, max UDMA/100
[    2.213962] ata2.00: configured for UDMA/100
[    2.215018] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GU70N    A102 PQ: 0 ANSI: 5
[    2.238148] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.238150] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.238264] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.238325] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.264404] usb 1-1.5: New USB device found, idVendor=0c45, idProduct=6449
[    2.264406] usb 1-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.264407] usb 1-1.5: Product: Laptop_Integrated_Webcam_E4HD
[    2.264408] usb 1-1.5: Manufacturer: 001D600B69F0-CA1C-0D232F
[    2.373342] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input9
[    2.385426] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input7
[    2.550450] ata5: SATA link down (SStatus 0 SControl 300)
[    2.862319] ata6: SATA link down (SStatus 0 SControl 300)
[    3.004133] clocksource: Switched to clocksource tsc
[    3.832898] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    4.751382] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    4.751521] systemd[1]: Detected architecture x86-64.
[    4.761123] systemd[1]: Set hostname to <mael-Latitude-E6430>.
[    5.296304] random: crng init done
[    6.161460] systemd[1]: Reached target Remote File Systems (Pre).
[    6.161590] systemd[1]: Created slice User and Session Slice.
[    6.161658] systemd[1]: Listening on Journal Audit Socket.
[    6.161698] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    6.161727] systemd[1]: Listening on Syslog Socket.
[    6.161759] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.161778] systemd[1]: Listening on udev Kernel Socket.
[    6.841004] lp: driver loaded but no devices found
[    7.051208] ppdev: user-space parallel port driver
[    7.078004] parport_pc 00:07: [io  0x0378-0x037b]
[    7.078180] parport_pc 00:07: [irq 5]
[    7.079303] parport_pc 00:07: activated
[    7.079306] parport_pc 00:07: reported by Plug and Play ACPI
[   14.443674] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[   14.464755] systemd-journald[267]: Received request to flush runtime journal from PID 1
[   14.577551] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.601107] Intel(R) Wireless WiFi driver for Linux
[   14.601109] Copyright(c) 2003- 2015 Intel Corporation
[   14.601329] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[   14.609454] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170531/utaddress-247)
[   14.609461] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.609466] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[   14.609470] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.609471] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[   14.609476] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\_SB.PCI0.PEG0.VID.GPSP) (20170531/utaddress-247)
[   14.609480] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.609481] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[   14.609485] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\_SB.PCI0.PEG0.VID.GPSP) (20170531/utaddress-247)
[   14.609489] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.609489] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   14.614010] media: Linux media interface: v0.10
[   14.619982] Linux video capture interface: v2.00
[   14.635863] Bluetooth: Core ver 2.22
[   14.635877] NET: Registered protocol family 31
[   14.635878] Bluetooth: HCI device and connection manager initialized
[   14.635880] Bluetooth: HCI socket layer initialized
[   14.635882] Bluetooth: L2CAP socket layer initialized
[   14.635887] Bluetooth: SCO socket layer initialized
[   14.638884] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_E4HD (0c45:6449)
[   14.660979] usbcore: registered new interface driver btusb
[   14.674572] snd_hda_intel 0000:01:00.1: Disabling MSI
[   14.674579] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   14.681586] uvcvideo 1-1.5:1.0: Entity type for entity Extension 4 was not initialized!
[   14.681588] uvcvideo 1-1.5:1.0: Entity type for entity Extension 3 was not initialized!
[   14.681590] uvcvideo 1-1.5:1.0: Entity type for entity Processing 2 was not initialized!
[   14.681591] uvcvideo 1-1.5:1.0: Entity type for entity Camera 1 was not initialized!
[   14.681671] input: Laptop_Integrated_Webcam_E4HD:  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input10
[   14.681737] usbcore: registered new interface driver uvcvideo
[   14.681738] USB Video Class driver (1.1.1)
[   14.686961] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD93BXX: line_outs=1 (0xe/0x0/0x0/0x0/0x0) type:line
[   14.686963] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[   14.686966] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[   14.686967] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[   14.686968] snd_hda_codec_idt hdaudioC0D0:    inputs:
[   14.686970] snd_hda_codec_idt hdaudioC0D0:      Dock Mic=0xf
[   14.686972] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x11
[   14.686974] snd_hda_codec_idt hdaudioC0D0:      Headset Mic=0xa
[   14.690151] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   14.698850] dell_wmi: Detected Dell WMI interface version 1
[   14.698921] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input11
[   14.725185] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   14.725227] input: HDA Intel PCH Headset Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   14.725264] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   14.725304] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   14.728150] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   14.728151] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   14.728152] RAPL PMU: hw unit of domain package 2^-16 Joules
[   14.728152] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   14.762923] AVX version of gcm_enc/dec engaged.
[   14.762925] AES CTR mode by8 optimization enabled
[   14.776080] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
[   14.780933] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
[   14.794653] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[   14.830048] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   14.830050] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   14.830052] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   14.830054] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
[   14.831073] intel_rapl: Found RAPL domain package
[   14.831074] intel_rapl: Found RAPL domain core
[   14.831078] intel_rapl: RAPL package 0 domain package locked by BIOS
[   14.869598] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   15.055211] dell_laptop: Using dell-rbtn acpi driver for receiving events
[   15.255649] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[   15.766374] usb 1-1.4: USB disconnect, device number 4
[   15.956554] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[   15.956621] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[   15.956680] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[   15.956740] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[   17.084627] Adding 1998844k swap on /dev/sda6.  Priority:-1 extents:1 across:1998844k FS
[   17.583872] audit: type=1400 audit(1519820344.112:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=787 comm="apparmor_parser"
[   17.583876] audit: type=1400 audit(1519820344.112:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=787 comm="apparmor_parser"
[   17.583879] audit: type=1400 audit(1519820344.112:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=787 comm="apparmor_parser"
[   17.583881] audit: type=1400 audit(1519820344.112:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=787 comm="apparmor_parser"
[   17.585091] audit: type=1400 audit(1519820344.114:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=786 comm="apparmor_parser"
[   17.585094] audit: type=1400 audit(1519820344.114:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=786 comm="apparmor_parser"
[   17.586752] audit: type=1400 audit(1519820344.115:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=794 comm="apparmor_parser"
[   17.590066] audit: type=1400 audit(1519820344.119:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=795 comm="apparmor_parser"
[   17.590070] audit: type=1400 audit(1519820344.119:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=795 comm="apparmor_parser"
[   17.590073] audit: type=1400 audit(1519820344.119:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=795 comm="apparmor_parser"
[   17.769885] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.769887] Bluetooth: BNEP filters: protocol multicast
[   17.769891] Bluetooth: BNEP socket layer initialized
[   20.248379] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   20.261996] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[   20.513722] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[   20.616266] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   20.620193] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   20.844245] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   21.014509] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  220.403994] wlp3s0: authenticate with 00:19:70:a7:17:4f
[  220.450768] wlp3s0: send auth to 00:19:70:a7:17:4f (try 1/3)
[  220.453238] wlp3s0: authenticated
[  220.460057] wlp3s0: associate with 00:19:70:a7:17:4f (try 1/3)
[  220.464117] wlp3s0: RX AssocResp from 00:19:70:a7:17:4f (capab=0x431 status=0 aid=3)
[  220.467956] wlp3s0: associated
[  220.468019] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[  286.015049] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[  286.135090] usb 3-1: device descriptor read/64, error -71
[  286.384106] usb 3-1: New USB device found, idVendor=0781, idProduct=5530
[  286.384111] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  286.384114] usb 3-1: Product: Firebird6Sp9
[  286.384117] usb 3-1: Manufacturer: SanDisk Corporation
[  286.384119] usb 3-1: SerialNumber: 0123456789ABCDEF
[  286.476295] usb-storage 3-1:1.0: USB Mass Storage device detected
[  286.476416] scsi host6: usb-storage 3-1:1.0
[  286.476505] usbcore: registered new interface driver usb-storage
[  286.486185] usbcore: registered new interface driver uas
[  287.483603] scsi 6:0:0:0: Direct-Access     SanDisk  Firebird         1.07 PQ: 0 ANSI: 2
[  287.484742] sd 6:0:0:0: Attached scsi generic sg2 type 0
[  287.484881] sd 6:0:0:0: [sdb] 131072 512-byte logical blocks: (67.1 MB/64.0 MiB)
[  287.485241] sd 6:0:0:0: [sdb] Write Protect is off
[  287.485248] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[  287.485477] sd 6:0:0:0: [sdb] No Caching mode page found
[  287.485486] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  287.563445] sd 6:0:0:0: ioctl_internal_command return code = 8070000
[  287.563455] sd 6:0:0:0: Sense Key : Hardware Error [current] 
[  287.563459] sd 6:0:0:0: Add. Sense: No additional sense information
[  287.567604] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[  287.651351] sd 6:0:0:0: ioctl_internal_command return code = 8070000
[  287.651358] sd 6:0:0:0: Sense Key : Hardware Error [current] 
[  287.651362] sd 6:0:0:0: Add. Sense: No additional sense information
[  287.939490] sd 6:0:0:0: ioctl_internal_command return code = 8070000
[  287.939496] sd 6:0:0:0: Sense Key : Hardware Error [current] 
[  287.939499] sd 6:0:0:0: Add. Sense: No additional sense information
[  288.019481] sd 6:0:0:0: ioctl_internal_command return code = 8070000
[  288.019487] sd 6:0:0:0: Sense Key : Hardware Error [current] 
[  288.019490] sd 6:0:0:0: Add. Sense: No additional sense information
mael@mael-Latitude-E6430:~$

Merci pour ton aide!

??

Mema a écritNon, la clé a deux ans et demi :/

Je pense que tu te trompes sur la durée de garantie à moins que tu habites au états-unis

Qui plus est, tu pourrais faire jouer la garantie des vices cachés si ton vendeur est de mauvaise fois.

https://www.grosbill.com/4-sandisk_cruzer_blade_16_go_usb_2_0_-123074-informatique-_cle_usb#article133 a écrit2. Présenter les caractéristiques définies d’un commun accord par les parties ou être propre à tout usage spécial recherché par l’acheteur, porté à la connaissance du vendeur et que ce dernier a accepté ».

« De la garantie des défauts de la chose vendue » (extrait du Code civil)

Art. 1641. « Le vendeur est tenu de la garantie à raison des défauts cachés de la chose vendue qui la rende impropre à l’usage auquel on la destine, ou qui diminuent tellement cet usage, que l’acheteur ne l’aurait pas acquise, ou n’en aurait donné qu’un moindre prix, s’il les avait connus ».

Art. 1648 - alinéa 1er. « L’action résultant des vices rédhibitoires doit être intentée par l’acquéreur dans un délai de deux ans à compter de la découverte du vice ».

Mema

En effet ! Je ne pensais pas que ce serait garanti aussi longtemps ! Je vais essayer de creuser de ce côté-là du coup !
Merci beaucoup pour ton dévouement, je te tiens au courant si ça a fonctionné !!
Bonne fin de journée à toi 🙂

??

N'oublies pas d'invalider le test fait inutilement

sudo cp  -v  /sys/module/usbcore/parameters/old_scheme_first.SAVE    /sys/module/usbcore/parameters/old_scheme_first

https://www.sandisk.com/about/legal/warranty/warranty-table a écritUSB Flash Drives

Warranty Period (Years)
SanDisk Extreme PRO USB 3.0 Flash Drive Lifetime**; 30***
SanDisk Extreme USB 3.0 Flash Drive Lifetime**; 30***
SanDisk Extreme Contour USB Lifetime** ; 10***