Ce site est optimisé pour être consulté depuis un navigateur moderne dans lequel JavaScript est activé.

impossible de lire les CD/DVD

goliath60

bonjour,

UBUTU/LINUX ouvre automatiquement de mes CD/DVD (qui contiennent des photos) qu'avec le logiciel pour la gravure

j'obtiens le message suivant: « Impossible de monter l'emplacement aucun média dans le lecteur »

ces cd/dvd ont été gravés il y a quelques années avec linux

J'ai trouvé sur les forums des explications et manipulations a faire dans un terminal mais ça n'a pas marché

ici par exemple

merci de votre aide

erresse

Bonjour,
Est-ce que toutefois ton CD/DVD est bien accessible et utilisable, malgré le message d'erreur ?
Parce-que ce message sort parfois à tort me semble-t-il, mais il n'empêche pas d'utiliser normalement le média si on l'ignore...

goliath60

a vrai dire je n'ai pas le choix:
je mets le cd dans le lecteur,
une fenêtre s'ouvre "que faire": je clique sur ouvrir le dossier,
puis s'ouvre automatiquement la gage pour la gravure, avec le message « Impossible de monter l'emplacement aucun média dans le lecteur »

avec un clic droit sur le cd, je ne peux que ouvrir,

goliath60

bonjour,

je continue a chercher mais je ne trouve pas mon bonheur.

Mes CD qui contiennent des photos ne s'ouvrent qu'avec le logiciel pour la gravure.

je ne peux donc pas regarder mes photos,

merci d'avance

erresse

As-tu essayé de modifier l'application qui doit ouvrir le CD par défaut (genre option "Ouvrir avec...") ?
Note: Plus compliqué si cette option ne marche pas :
As-tu vérifié dans les fichiers "mime" (il en existe dans ton répertoire personnel et dans les répertoires système) quelle application est prévue pour ouvrir le média ? Et la changer pour une autre (par exemple le gestionnaire de fichiers) ?

goliath60

Merci erresse de me venir en aide,

lorsque j'insère un cd avec des photos, s'ouvre automatiquement la page pour la gravure, avec le message « Impossible de monter l'emplacement aucun média dans le lecteur »

lorsque je clic droit sur l'icone du cd, je n'ai que: ouvrir / disque cd vierge / retirer du lanceur / ejecter
il n'y a pas ouvrir avec

Pour ce qui est des fichiers mimes, après recherches car je ne connais pas, j'ai cru comprendre que cela servait à ouvrir "telle extension" avec "tel programme"
sur mon ordi, lorsque j'ouvre une photo, c'est bien visionneuse d'image qui s'ouvre.
Dans mon cas, je n'arrive pas à ouvrir les cd, il indique "cd vierge" et ne lance que le logiciel pour la gravure, je n'ai pas d'autre choix

si tu as d'autres idées je suis preneur,

merci

cqfd93

Bonjour,

Je pense que c'est lié au comportement de ton gestionnaire de fichiers.

Je suis sous Unity (sur lequel le gestionnaire standard est Nautilus) mais j'utilise aussi Caja et dans les préférences de Caja, j'ai ces paramètres :

Je ne sais plus comment on fait pour Nautilus, désolée.

goliath60

je continue mes recherche et j'ai effectué des commandes (sans trop savoir a quoi elles correspondaient), mais voici le résultat:

vadee@vadee:~$ kernel/drivers/ide
bash: kernel/drivers/ide: Aucun fichier ou dossier de ce type
vadee@vadee:~$  /etc/fstab
bash: /etc/fstab: Permission non accordée
vadee@vadee:~$  sudo fdisk -l 
[sudo] Mot de passe de vadee : 
Disque /dev/ram0 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram1 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram2 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram3 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram4 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram5 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram6 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram7 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram8 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram9 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram10 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram11 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram12 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram13 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram14 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram15 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/sda : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x000b9b9c

Périphérique Amorçage Start        Fin   Secteurs   Size Id Type
/dev/sda2              2048 1953521663 1953519616 931,5G  7 HPFS/NTFS/exFAT


Disque /dev/sdb : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x000e8201

Périphérique Amorçage      Start        Fin   Secteurs   Size Id Type
/dev/sdb1    *              2048 1921662975 1921660928 916,3G 83 Linux
/dev/sdb2             1921665022 1953523711   31858690  15,2G  5 Étendue
/dev/sdb5             1921665024 1953523711   31858688  15,2G 82 partition d'éch

Partition 2 does not start on physical sector boundary.
vadee@vadee:~$ cat /proc/sys/dev/cdrom/info
CD-ROM information, Id: cdrom.c 3.20 2003/12/17

drive name:		sr0
drive speed:		48
drive # of slots:	1
Can close tray:		1
Can open tray:		1
Can lock tray:		1
Can change speed:	1
Can select disk:	0
Can read multisession:	1
Can read MCN:		1
Reports media changed:	1
Can play audio:		1
Can write CD-R:		1
Can write CD-RW:	1
Can read DVD:		1
Can write DVD-R:	1
Can write DVD-RAM:	1
Can read MRW:		1
Can write MRW:		1
Can write RAM:		1


vadee@vadee:~$ etc/modules/piix
bash: etc/modules/piix: Aucun fichier ou dossier de ce type
vadee@vadee:~$ ls /dev |grep cdrom
cdrom
vadee@vadee:~$ ls -l /dev | grep -i sc
vadee@vadee:~$ cdrecord -scanbus
scsibus1:
	1,0,0	100) 'ASUS    ' 'DRW-24F1ST   a  ' '1.00' Removable CD-ROM
	1,1,0	101) *
	1,2,0	102) *
	1,3,0	103) *
	1,4,0	104) *
	1,5,0	105) *
	1,6,0	106) *
	1,7,0	107) *
vadee@vadee:~$ cat /var/log/messages | grep -i CD-ROM
cat: /var/log/messages: Aucun fichier ou dossier de ce type
vadee@vadee:~$ wodim --devices
wodim: Overview of accessible drives (1 found) :
-------------------------------------------------------------------------
 0  dev='/dev/sg1'	rwrw-- : 'ASUS' 'DRW-24F1ST   a'
-------------------------------------------------------------------------
vadee@vadee:~$ cat /proc/sys/dev/cdrom/info
CD-ROM information, Id: cdrom.c 3.20 2003/12/17

drive name:		sr0
drive speed:		48
drive # of slots:	1
Can close tray:		1
Can open tray:		1
Can lock tray:		1
Can change speed:	1
Can select disk:	0
Can read multisession:	1
Can read MCN:		1
Reports media changed:	1
Can play audio:		1
Can write CD-R:		1
Can write CD-RW:	1
Can read DVD:		1
Can write DVD-R:	1
Can write DVD-RAM:	1
Can read MRW:		1
Can write MRW:		1
Can write RAM:		1


vadee@vadee:~$ lsmod | grep -i cdrom
vadee@vadee:~$ sudo modprobe cdrom
[sudo] Mot de passe de vadee : 
vadee@vadee:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-66-generic (buildd@lgw01-28) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #87-Ubuntu SMP Fri Mar 3 15:29:05 UTC 2017 (Ubuntu 4.4.0-66.87-generic 4.4.44)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-66-generic root=UUID=496e9007-632f-49ee-a0ce-7f2a5eb1a540 ro quiet splash nomodeset vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] tseg: 00af000000
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ad12bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ad12c000-0x00000000ad15bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ad15c000-0x00000000ad16bfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000ad16c000-0x00000000ad7edfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ad7ee000-0x00000000ae3e7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ae3e8000-0x00000000ae3e8fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ae3e9000-0x00000000ae5eefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ae5ef000-0x00000000aea32fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000aea33000-0x00000000aeff3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aeff4000-0x00000000aeffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: System manufacturer System Product Name/A68HM-PLUS, BIOS 0803 04/09/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFE0000000 write-back
[    0.000000]   2 base 0000A0000000 mask FFFFF0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000041f000000 aka 16880M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xb0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xaf000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd840-0x000fd84f] mapped at [ffff8800000fd840]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x0220c000, 0x0220cfff] PGTABLE
[    0.000000] BRK [0x0220d000, 0x0220dfff] PGTABLE
[    0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
[    0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE
[    0.000000] BRK [0x02210000, 0x02210fff] PGTABLE
[    0.000000] BRK [0x02211000, 0x02211fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x336da000-0x35b64fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000AD163078 00006C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000AD16A280 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150930/tbfadt-654)
[    0.000000] ACPI: DSDT 0x00000000AD163180 007100 (v02 ALASKA A M I    00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000AD7E3080 000040
[    0.000000] ACPI: APIC 0x00000000AD16A390 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000AD16A408 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000AD16A450 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 0x00000000AD16A490 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: CRAT 0x00000000AD16B5C0 000578 (v01 AMD    BANTRY   00000001 AMD  00000001)
[    0.000000] ACPI: UEFI 0x00000000AD16A520 000042 (v01 ALASKA A M I    01072009      00000000)
[    0.000000] ACPI: SSDT 0x00000000AD16A568 000B9C (v01 AMD    BANTRY   00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000AD16B108 0004B7 (v02 AMD    BANTRY   00000001 MSFT 04000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x41eff7000-0x41effbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000041effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000ad12bfff]
[    0.000000]   node   0: [mem 0x00000000ae3e8000-0x00000000ae3e8fff]
[    0.000000]   node   0: [mem 0x00000000ae5ef000-0x00000000aea32fff]
[    0.000000]   node   0: [mem 0x00000000aeff4000-0x00000000aeffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000041effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff]
[    0.000000] On node 0 totalpages: 3982618
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11030 pages used for memmap
[    0.000000]   DMA32 zone: 705917 pages, LIFO batch:31
[    0.000000]   Normal zone: 51136 pages used for memmap
[    0.000000]   Normal zone: 3272704 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xad12c000-0xad15bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xad15c000-0xad16bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xad16c000-0xad7edfff]
[    0.000000] PM: Registered nosave memory: [mem 0xad7ee000-0xae3e7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xae3e9000-0xae5eefff]
[    0.000000] PM: Registered nosave memory: [mem 0xaea33000-0xaeff3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xaf000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfeb7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xaf000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88041ec00000 s98264 r8192 d28712 u524288
[    0.000000] pcpu-alloc: s98264 r8192 d28712 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 3920367
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-66-generic root=UUID=496e9007-632f-49ee-a0ce-7f2a5eb1a540 ro quiet splash nomodeset vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 15557740K/15930472K available (8452K kernel code, 1293K rwdata, 3980K rodata, 1488K init, 1316K bss, 372732K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3890.631 MHz processor
[    0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 7781.26 BogoMIPS (lpj=15562524)
[    0.000022] pid_max: default: 32768 minimum: 301
[    0.000027] ACPI: Core revision 20150930
[    0.003069] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.003086] Security Framework initialized
[    0.003087] Yama: becoming mindful.
[    0.003103] AppArmor: AppArmor initialized
[    0.003972] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.007725] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.009397] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.009413] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.009677] Initializing cgroup subsys io
[    0.009682] Initializing cgroup subsys memory
[    0.009689] Initializing cgroup subsys devices
[    0.009692] Initializing cgroup subsys freezer
[    0.009694] Initializing cgroup subsys net_cls
[    0.009696] Initializing cgroup subsys perf_event
[    0.009698] Initializing cgroup subsys net_prio
[    0.009701] Initializing cgroup subsys hugetlb
[    0.009703] Initializing cgroup subsys pids
[    0.009721] CPU: Physical Processor ID: 0
[    0.009722] CPU: Processor Core ID: 0
[    0.009724] mce: CPU supports 7 MCE banks
[    0.009733] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.009746] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.009974] Freeing SMP alternatives memory: 32K (ffffffff820b9000 - ffffffff820c1000)
[    0.019359] ftrace: allocating 32123 entries in 126 pages
[    0.028310] smpboot: APIC(10) Converting physical 1 to logical package 0
[    0.028313] smpboot: Max logical packages: 2
[    0.028622] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.173725] smpboot: CPU0: AMD A8-6600K APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x13, stepping: 0x1)
[    0.173740] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.173744] ... version:                0
[    0.173745] ... bit width:              48
[    0.173746] ... generic registers:      6
[    0.173747] ... value mask:             0000ffffffffffff
[    0.173748] ... max period:             00007fffffffffff
[    0.173749] ... fixed-purpose events:   0
[    0.173749] ... event mask:             000000000000003f
[    0.174351] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.174411] x86: Booting SMP configuration:
[    0.174413] .... node  #0, CPUs:      #1 #2 #3
[    0.181030] x86: Booted up 1 node, 4 CPUs
[    0.181033] smpboot: Total of 4 processors activated (31125.04 BogoMIPS)
[    0.181707] devtmpfs: initialized
[    0.185721] evm: security.selinux
[    0.185724] evm: security.SMACK64
[    0.185725] evm: security.SMACK64EXEC
[    0.185726] evm: security.SMACK64TRANSMUTE
[    0.185727] evm: security.SMACK64MMAP
[    0.185727] evm: security.ima
[    0.185728] evm: security.capability
[    0.185857] PM: Registering ACPI NVS region [mem 0xad16c000-0xad7edfff] (6823936 bytes)
[    0.185935] PM: Registering ACPI NVS region [mem 0xae3e9000-0xae5eefff] (2121728 bytes)
[    0.186026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.186099] pinctrl core: initialized pinctrl subsystem
[    0.186195] RTC time:  4:15:21, date: 03/29/18
[    0.186291] NET: Registered protocol family 16
[    0.197791] cpuidle: using governor ladder
[    0.209788] cpuidle: using governor menu
[    0.209800] PCCT header not found.
[    0.209956] ACPI: bus type PCI registered
[    0.209958] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.210035] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.210037] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.210045] PCI: Using configuration type 1 for base access
[    0.210415] mtrr: your CPUs had inconsistent fixed MTRR settings
[    0.210416] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.210417] mtrr: probably your BIOS does not setup all CPUs.
[    0.210417] mtrr: corrected configuration.
[    0.222288] ACPI: Added _OSI(Module Device)
[    0.222290] ACPI: Added _OSI(Processor Device)
[    0.222292] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.222293] ACPI: Added _OSI(Processor Aggregator Device)
[    0.223565] ACPI: Executed 1 blocks of module-level executable AML code
[    0.225322] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.225627] ACPI: Interpreter enabled
[    0.225642] ACPI: (supports S0 S3 S4 S5)
[    0.225643] ACPI: Using IOAPIC for interrupt routing
[    0.225773] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.226177] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.230249] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.230254] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.230375] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.230490] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.230500] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.230729] PCI host bridge to bus 0000:00
[    0.230731] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.230733] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.230734] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.230736] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.230737] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.230738] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.230740] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff window]
[    0.230741] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.230748] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[    0.230841] pci 0000:00:01.0: [1002:990e] type 00 class 0x030000
[    0.230862] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[    0.230867] pci 0000:00:01.0: reg 0x14: [io  0xf000-0xf0ff]
[    0.230873] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
[    0.230915] pci 0000:00:01.0: supports D1 D2
[    0.230979] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[    0.230995] pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
[    0.231037] pci 0000:00:01.1: supports D1 D2
[    0.231123] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[    0.231162] pci 0000:00:10.0: reg 0x10: [mem 0xfeb48000-0xfeb49fff 64bit]
[    0.231245] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.231289] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.231335] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[    0.231360] pci 0000:00:11.0: reg 0x10: [io  0xf140-0xf147]
[    0.231369] pci 0000:00:11.0: reg 0x14: [io  0xf130-0xf133]
[    0.231377] pci 0000:00:11.0: reg 0x18: [io  0xf120-0xf127]
[    0.231386] pci 0000:00:11.0: reg 0x1c: [io  0xf110-0xf113]
[    0.231395] pci 0000:00:11.0: reg 0x20: [io  0xf100-0xf10f]
[    0.231403] pci 0000:00:11.0: reg 0x24: [mem 0xfeb4e000-0xfeb4e7ff]
[    0.231493] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[    0.231507] pci 0000:00:12.0: reg 0x10: [mem 0xfeb4d000-0xfeb4dfff]
[    0.231590] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.231628] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[    0.231652] pci 0000:00:12.2: reg 0x10: [mem 0xfeb4c000-0xfeb4c0ff]
[    0.231719] pci 0000:00:12.2: supports D1 D2
[    0.231720] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.231756] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.231795] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[    0.231809] pci 0000:00:13.0: reg 0x10: [mem 0xfeb4b000-0xfeb4bfff]
[    0.231900] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.231938] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[    0.231962] pci 0000:00:13.2: reg 0x10: [mem 0xfeb4a000-0xfeb4a0ff]
[    0.232028] pci 0000:00:13.2: supports D1 D2
[    0.232029] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.232064] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.232102] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.232220] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[    0.232245] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
[    0.232300] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.232334] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.232367] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.232488] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[    0.232551] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.232594] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[    0.232662] pci 0000:00:15.0: supports D1 D2
[    0.232663] pci 0000:00:15.0: PME# supported from D0 D3hot D3cold
[    0.232702] pci 0000:00:15.0: System wakeup disabled by ACPI
[    0.232739] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
[    0.232806] pci 0000:00:15.1: supports D1 D2
[    0.232807] pci 0000:00:15.1: PME# supported from D0 D3hot D3cold
[    0.232846] pci 0000:00:15.1: System wakeup disabled by ACPI
[    0.232883] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
[    0.232949] pci 0000:00:15.2: supports D1 D2
[    0.232950] pci 0000:00:15.2: PME# supported from D0 D3hot D3cold
[    0.232989] pci 0000:00:15.2: System wakeup disabled by ACPI
[    0.233028] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[    0.233113] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[    0.233180] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[    0.233248] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[    0.233320] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[    0.233388] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[    0.233528] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[    0.233536] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    0.233538] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    0.233539] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    0.233540] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.233542] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.233543] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.233544] pci 0000:00:14.4:   bridge window [mem 0xe0000000-0xffffffff window] (subtractive decode)
[    0.233589] pci 0000:00:15.0: PCI bridge to [bus 02]
[    0.233659] pci 0000:03:00.0: [1b21:1142] type 00 class 0x0c0330
[    0.233705] pci 0000:03:00.0: reg 0x10: [mem 0xfea00000-0xfea07fff 64bit]
[    0.233824] pci 0000:03:00.0: PME# supported from D3cold
[    0.241802] pci 0000:00:15.1: PCI bridge to [bus 03]
[    0.241825] pci 0000:00:15.1:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.241925] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    0.241968] pci 0000:04:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.241997] pci 0000:04:00.0: reg 0x18: [mem 0xfe900000-0xfe900fff 64bit]
[    0.242016] pci 0000:04:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.242094] pci 0000:04:00.0: supports D1 D2
[    0.242095] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.242139] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.249802] pci 0000:00:15.2: PCI bridge to [bus 04]
[    0.249815] pci 0000:00:15.2:   bridge window [io  0xe000-0xefff]
[    0.249826] pci 0000:00:15.2:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.249831] pci 0000:00:15.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.250289] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 6 7 10 11 14 15) *0
[    0.250340] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 6 7 10 11 14 15) *0
[    0.250392] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 6 7 10 11 14 15) *0
[    0.250444] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 10 11 14 15) *0
[    0.250486] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 6 7 10 11 14 15) *0
[    0.250519] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0
[    0.250552] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 6 7 10 11 14 15) *0
[    0.250585] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0
[    0.250858] vgaarb: setting as boot device: PCI:0000:00:01.0
[    0.250860] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.250864] vgaarb: loaded
[    0.250866] vgaarb: bridge control possible 0000:00:01.0
[    0.251081] SCSI subsystem initialized
[    0.251133] libata version 3.00 loaded.
[    0.251154] ACPI: bus type USB registered
[    0.251170] usbcore: registered new interface driver usbfs
[    0.251179] usbcore: registered new interface driver hub
[    0.251194] usbcore: registered new device driver usb
[    0.251324] PCI: Using ACPI for IRQ routing
[    0.253246] PCI: pci_cache_line_size set to 64 bytes
[    0.253301] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.253303] e820: reserve RAM buffer [mem 0xad12c000-0xafffffff]
[    0.253304] e820: reserve RAM buffer [mem 0xae3e9000-0xafffffff]
[    0.253305] e820: reserve RAM buffer [mem 0xaea33000-0xafffffff]
[    0.253306] e820: reserve RAM buffer [mem 0xaf000000-0xafffffff]
[    0.253307] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
[    0.253408] NetLabel: Initializing
[    0.253409] NetLabel:  domain hash size = 128
[    0.253410] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.253420] NetLabel:  unlabeled traffic allowed by default
[    0.253482] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.253485] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.255569] clocksource: Switched to clocksource hpet
[    0.261791] AppArmor: AppArmor Filesystem Enabled
[    0.261854] pnp: PnP ACPI init
[    0.261970] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.261974] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.262040] system 00:01: [mem 0xb0000000-0xdfffffff] has been reserved
[    0.262042] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.262107] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.262245] system 00:03: [io  0x0300-0x031f] has been reserved
[    0.262247] system 00:03: [io  0x0290-0x029f] has been reserved
[    0.262248] system 00:03: [io  0x0230-0x023f] has been reserved
[    0.262251] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.262299] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.262397] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.262399] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.262433] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.262628] pnp 00:07: [dma 0 disabled]
[    0.262669] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.262870] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.262872] system 00:08: [io  0x040b] has been reserved
[    0.262875] system 00:08: [io  0x04d6] has been reserved
[    0.262877] system 00:08: [io  0x0c00-0x0c01] has been reserved
[    0.262878] system 00:08: [io  0x0c14] has been reserved
[    0.262879] system 00:08: [io  0x0c50-0x0c51] has been reserved
[    0.262881] system 00:08: [io  0x0c52] has been reserved
[    0.262882] system 00:08: [io  0x0c6c] has been reserved
[    0.262884] system 00:08: [io  0x0c6f] has been reserved
[    0.262885] system 00:08: [io  0x0cd0-0x0cd1] has been reserved
[    0.262886] system 00:08: [io  0x0cd2-0x0cd3] has been reserved
[    0.262888] system 00:08: [io  0x0cd4-0x0cd5] has been reserved
[    0.262890] system 00:08: [io  0x0cd6-0x0cd7] has been reserved
[    0.262892] system 00:08: [io  0x0cd8-0x0cdf] has been reserved
[    0.262893] system 00:08: [io  0x0800-0x089f] could not be reserved
[    0.262895] system 00:08: [io  0x0b20-0x0b3f] has been reserved
[    0.262896] system 00:08: [io  0x0900-0x090f] has been reserved
[    0.262897] system 00:08: [io  0x0910-0x091f] has been reserved
[    0.262899] system 00:08: [io  0xfe00-0xfefe] has been reserved
[    0.262901] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.262903] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.262904] system 00:08: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.262906] system 00:08: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.262908] system 00:08: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.262909] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    0.262911] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.263052] pnp: PnP ACPI: found 9 devices
[    0.269402] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.269432] pci 0000:00:14.4: PCI bridge to [bus 01]
[    0.269443] pci 0000:00:15.0: PCI bridge to [bus 02]
[    0.269453] pci 0000:00:15.1: PCI bridge to [bus 03]
[    0.269457] pci 0000:00:15.1:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.269464] pci 0000:00:15.2: PCI bridge to [bus 04]
[    0.269466] pci 0000:00:15.2:   bridge window [io  0xe000-0xefff]
[    0.269470] pci 0000:00:15.2:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.269473] pci 0000:00:15.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.269479] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.269480] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.269481] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.269483] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.269484] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.269486] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.269487] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xffffffff window]
[    0.269489] pci_bus 0000:01: resource 4 [io  0x0000-0x03af window]
[    0.269490] pci_bus 0000:01: resource 5 [io  0x03e0-0x0cf7 window]
[    0.269491] pci_bus 0000:01: resource 6 [io  0x03b0-0x03df window]
[    0.269493] pci_bus 0000:01: resource 7 [io  0x0d00-0xffff window]
[    0.269494] pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.269495] pci_bus 0000:01: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.269497] pci_bus 0000:01: resource 10 [mem 0xe0000000-0xffffffff window]
[    0.269498] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.269500] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.269501] pci_bus 0000:04: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.269502] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.269528] NET: Registered protocol family 2
[    0.269705] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.269970] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.270171] TCP: Hash tables configured (established 131072 bind 65536)
[    0.270209] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.270272] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.270383] NET: Registered protocol family 1
[    0.270399] pci 0000:00:01.0: Video device with shadowed ROM
[    0.463888] PCI: CLS 64 bytes, default 64
[    0.463938] Trying to unpack rootfs image as initramfs...
[    0.905120] Freeing initrd memory: 37420K (ffff8800336da000 - ffff880035b65000)
[    0.905159] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.905161] software IO TLB [mem 0xa912c000-0xad12c000] (64MB) mapped at [ffff8800a912c000-ffff8800ad12bfff]
[    0.905215] perf: AMD NB counters detected
[    0.905252] LVT offset 0 assigned for vector 0x400
[    0.905264] perf: AMD IBS detected (0x000000ff)
[    0.905338] Scanning for low memory corruption every 60 seconds
[    0.905681] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.905710] audit: initializing netlink subsys (disabled)
[    0.905726] audit: type=2000 audit(1522296920.796:1): initialized
[    0.906004] Initialise system trusted keyring
[    0.906207] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.906210] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.907709] zbud: loaded
[    0.907872] VFS: Disk quotas dquot_6.6.0
[    0.907904] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.908156] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.908472] fuse init (API version 7.23)
[    0.908621] Key type big_key registered
[    0.908635] Allocating IMA MOK and blacklist keyrings.
[    0.909090] Key type asymmetric registered
[    0.909093] Asymmetric key parser 'x509' registered
[    0.909130] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.909160] io scheduler noop registered
[    0.909162] io scheduler deadline registered (default)
[    0.909190] io scheduler cfq registered
[    0.909543] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.909548] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.909577] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[    0.909578] vesafb: scrolling: redraw
[    0.909579] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.909591] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90002000000, using 8128k, total 8128k
[    0.909769] Console: switching to colour frame buffer device 240x67
[    0.909791] fb0: VESA VGA frame buffer device
[    0.909865] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.909868] ACPI: Power Button [PWRB]
[    0.909900] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.909902] ACPI: Power Button [PWRF]
[    0.909954] ACPI: acpi_idle registered with cpuidle
[    0.910300] GHES: HEST is not enabled!
[    0.910389] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.930743] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.932306] Linux agpgart interface v0.103
[    0.935151] brd: module loaded
[    0.936410] loop: module loaded
[    0.936619] libphy: Fixed MDIO Bus: probed
[    0.936622] tun: Universal TUN/TAP device driver, 1.6
[    0.936623] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.936674] PPP generic driver version 2.4.2
[    0.936729] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.936735] ehci-pci: EHCI PCI platform driver
[    0.936840] QUIRK: Enable AMD PLL fix
[    0.936861] ehci-pci 0000:00:12.2: EHCI Host Controller
[    0.936866] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    0.936869] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    0.936877] ehci-pci 0000:00:12.2: debug port 1
[    0.936906] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4c000
[    0.947588] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    0.947658] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.947659] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.947661] usb usb1: Product: EHCI Host Controller
[    0.947662] usb usb1: Manufacturer: Linux 4.4.0-66-generic ehci_hcd
[    0.947664] usb usb1: SerialNumber: 0000:00:12.2
[    0.947787] hub 1-0:1.0: USB hub found
[    0.947792] hub 1-0:1.0: 5 ports detected
[    0.948018] ehci-pci 0000:00:13.2: EHCI Host Controller
[    0.948022] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    0.948025] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    0.948033] ehci-pci 0000:00:13.2: debug port 1
[    0.948058] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4a000
[    0.959581] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    0.959646] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.959648] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.959650] usb usb2: Product: EHCI Host Controller
[    0.959651] usb usb2: Manufacturer: Linux 4.4.0-66-generic ehci_hcd
[    0.959653] usb usb2: SerialNumber: 0000:00:13.2
[    0.959773] hub 2-0:1.0: USB hub found
[    0.959778] hub 2-0:1.0: 5 ports detected
[    0.959909] ehci-platform: EHCI generic platform driver
[    0.959925] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.959928] ohci-pci: OHCI PCI platform driver
[    0.960045] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    0.960049] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    0.960070] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4d000
[    1.019604] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.019607] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.019609] usb usb3: Product: OHCI PCI host controller
[    1.019610] usb usb3: Manufacturer: Linux 4.4.0-66-generic ohci_hcd
[    1.019611] usb usb3: SerialNumber: 0000:00:12.0
[    1.019745] hub 3-0:1.0: USB hub found
[    1.019751] hub 3-0:1.0: 5 ports detected
[    1.019970] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.019975] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[    1.019997] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4b000
[    1.079599] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.079602] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.079603] usb usb4: Product: OHCI PCI host controller
[    1.079605] usb usb4: Manufacturer: Linux 4.4.0-66-generic ohci_hcd
[    1.079606] usb usb4: SerialNumber: 0000:00:13.0
[    1.079743] hub 4-0:1.0: USB hub found
[    1.079749] hub 4-0:1.0: 5 ports detected
[    1.079878] ohci-platform: OHCI generic platform driver
[    1.079892] uhci_hcd: USB Universal Host Controller Interface driver
[    1.080025] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.080030] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
[    1.080210] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
[    1.080343] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    1.080345] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.080346] usb usb5: Product: xHCI Host Controller
[    1.080347] usb usb5: Manufacturer: Linux 4.4.0-66-generic xhci-hcd
[    1.080348] usb usb5: SerialNumber: 0000:00:10.0
[    1.080431] hub 5-0:1.0: USB hub found
[    1.080437] hub 5-0:1.0: 2 ports detected
[    1.080504] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.080507] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[    1.083626] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.083640] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    1.083641] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.083642] usb usb6: Product: xHCI Host Controller
[    1.083643] usb usb6: Manufacturer: Linux 4.4.0-66-generic xhci-hcd
[    1.083644] usb usb6: SerialNumber: 0000:00:10.0
[    1.083727] hub 6-0:1.0: USB hub found
[    1.083733] hub 6-0:1.0: 2 ports detected
[    1.083835] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.083838] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 7
[    1.144193] xhci_hcd 0000:03:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010
[    1.144302] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    1.144304] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.144305] usb usb7: Product: xHCI Host Controller
[    1.144306] usb usb7: Manufacturer: Linux 4.4.0-66-generic xhci-hcd
[    1.144307] usb usb7: SerialNumber: 0000:03:00.0
[    1.144390] hub 7-0:1.0: USB hub found
[    1.144397] hub 7-0:1.0: 2 ports detected
[    1.144466] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.144468] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
[    1.144513] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.144525] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
[    1.144527] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.144528] usb usb8: Product: xHCI Host Controller
[    1.144529] usb usb8: Manufacturer: Linux 4.4.0-66-generic xhci-hcd
[    1.144530] usb usb8: SerialNumber: 0000:03:00.0
[    1.144626] hub 8-0:1.0: USB hub found
[    1.144633] hub 8-0:1.0: 2 ports detected
[    1.144732] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.145078] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.145081] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.145198] mousedev: PS/2 mouse device common for all mice
[    1.145342] rtc_cmos 00:04: RTC can wake from S4
[    1.145447] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.145466] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.145473] i2c /dev entries driver
[    1.145520] device-mapper: uevent: version 1.0.3
[    1.145578] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.145595] ledtrig-cpu: registered to indicate activity on CPUs
[    1.145974] NET: Registered protocol family 10
[    1.146142] NET: Registered protocol family 17
[    1.146150] Key type dns_resolver registered
[    1.146432] microcode: CPU0: patch_level=0x06001119
[    1.146439] microcode: CPU1: patch_level=0x06001119
[    1.146446] microcode: CPU2: patch_level=0x06001119
[    1.146451] microcode: CPU3: patch_level=0x06001119
[    1.146484] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.146629] registered taskstats version 1
[    1.146641] Loading compiled-in X.509 certificates
[    1.147337] Loaded X.509 cert 'Build time autogenerated kernel key: 32ca4feee90b5cde51f5f8c0e024b22f8c679982'
[    1.147351] zswap: loaded using pool lzo/zbud
[    1.149320] Key type trusted registered
[    1.152590] Key type encrypted registered
[    1.152599] AppArmor: AppArmor sha1 policy hashing enabled
[    1.152603] ima: No TPM chip found, activating TPM-bypass!
[    1.152629] evm: HMAC attrs: 0x1
[    1.152915]   Magic number: 10:302:263
[    1.153008] rtc_cmos 00:04: setting system clock to 2018-03-29 04:15:22 UTC (1522296922)
[    1.153164] acpi-cpufreq: overriding BIOS provided _PSD data
[    1.153296] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.153297] EDD information not available.
[    1.153367] PM: Hibernation image not present or could not be loaded.
[    1.154428] Freeing unused kernel memory: 1488K (ffffffff81f45000 - ffffffff820b9000)
[    1.154429] Write protecting the kernel read-only data: 14336k
[    1.155063] Freeing unused kernel memory: 1776K (ffff880001844000 - ffff880001a00000)
[    1.155341] Freeing unused kernel memory: 116K (ffff880001de3000 - ffff880001e00000)
[    1.165123] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    1.165184] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    1.165194] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    1.165585] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    1.165604] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    1.171815] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    1.171835] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    1.171841] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    1.172073] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    1.172089] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    1.203187] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.203220] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    1.203298] ACPI Error: [AFN7] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[    1.203302] ACPI Error: Method parse/execution failed [\_SB.PCI0.VGA.LCD._BCM] (Node ffff88040eca5c30), AE_NOT_FOUND (20150930/psparse-542)
[    1.203309] ACPI Error: Evaluating _BCM failed (20150930/video-367)
[    1.203367] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    1.204864] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.210538] wmi: Mapper loaded
[    1.213075] ahci 0000:00:11.0: version 3.0
[    1.213298] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.213302] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio 
[    1.214375] scsi host0: ahci
[    1.214487] scsi host1: ahci
[    1.214587] scsi host2: ahci
[    1.214779] scsi host3: ahci
[    1.214939] scsi host4: ahci
[    1.215039] scsi host5: ahci
[    1.215092] ata1: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e100 irq 34
[    1.215094] ata2: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e180 irq 34
[    1.215096] ata3: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e200 irq 34
[    1.215098] ata4: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e280 irq 34
[    1.215100] ata5: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e300 irq 34
[    1.215102] ata6: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e380 irq 34
[    1.215519] [drm] Initialized drm 1.1.0 20060810
[    1.218064] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.224413] r8169 0000:04:00.0 eth0: RTL8168g/8111g at 0xffffc90001b52000, 14:dd:a9:79:64:8d, XID 0c000800 IRQ 35
[    1.224417] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.243454] [drm] VGACON disable radeon kernel modesetting.
[    1.243475] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module!
[    1.259561] usb 1-5: new high-speed USB device number 2 using ehci-pci
[    1.391548] usb 5-2: new high-speed USB device number 2 using xhci_hcd
[    1.511533] usb 7-2: new full-speed USB device number 2 using xhci_hcd
[    1.532668] usb 5-2: New USB device found, idVendor=05e3, idProduct=0745
[    1.532671] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[    1.532673] usb 5-2: Product: USB Storage
[    1.532674] usb 5-2: SerialNumber: 000000000903
[    1.535556] ata5: SATA link down (SStatus 0 SControl 300)
[    1.536368] usb-storage 5-2:1.0: USB Mass Storage device detected
[    1.536480] scsi host6: usb-storage 5-2:1.0
[    1.536554] usbcore: registered new interface driver usb-storage
[    1.537640] usbcore: registered new interface driver uas
[    1.539544] ata6: SATA link down (SStatus 0 SControl 300)
[    1.539580] ata4: SATA link down (SStatus 0 SControl 300)
[    1.662387] usb 1-5: New USB device found, idVendor=046d, idProduct=0826
[    1.662390] usb 1-5: New USB device strings: Mfr=0, Product=2, SerialNumber=1
[    1.662392] usb 1-5: Product: HD Webcam C525
[    1.662393] usb 1-5: SerialNumber: 0A943420
[    1.703526] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.703562] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.704413] ata1.00: ATA-8: WDC WD1002FBYS-18A6B0, 03.00C06, max UDMA/133
[    1.704416] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.705386] ata1.00: configured for UDMA/133
[    1.705579] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1002FBYS-1 0C06 PQ: 0 ANSI: 5
[    1.705779] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.705815] ata2.00: ATAPI: ASUS     DRW-24F1ST   a, 1.00, max UDMA/100
[    1.705818] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.705826] sd 0:0:0:0: [sda] Write Protect is off
[    1.705829] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.705846] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    1.706872] ata2.00: configured for UDMA/100
[    1.707538] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.708151] ata3.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
[    1.708154] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.708472] scsi 1:0:0:0: CD-ROM            ASUS     DRW-24F1ST   a   1.00 PQ: 0 ANSI: 5
[    1.708718] ata3.00: configured for UDMA/133
[    1.724566] usb 7-2: New USB device found, idVendor=058f, idProduct=9254
[    1.724569] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.724571] usb 7-2: Product: Generic USB Hub
[    1.724572] usb 7-2: Manufacturer: ALCOR
[    1.724691] usb 7-2: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[    1.724955]  sda: sda2
[    1.725209] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.726100] hub 7-2:1.0: USB hub found
[    1.726401] hub 7-2:1.0: 4 ports detected
[    1.727148] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.727152] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.727295] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.727451] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.727635] scsi 2:0:0:0: Direct-Access     ATA      WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
[    1.727806] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.727816] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[    1.727841] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.727857] sd 2:0:0:0: [sdb] Write Protect is off
[    1.727860] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.727888] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.782010]  sdb: sdb1 sdb2 < sdb5 >
[    1.782466] sd 2:0:0:0: [sdb] Attached SCSI disk
[    1.903500] tsc: Refined TSC clocksource calibration: 3890.256 MHz
[    1.903506] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x7026ca3a93f, max_idle_ns: 881590760163 ns
[    1.999486] usb 7-2.2: new full-speed USB device number 3 using xhci_hcd
[    2.115308] usb 7-2.2: not running at top speed; connect to a high speed hub
[    2.122094] usb 7-2.2: New USB device found, idVendor=04b8, idProduct=0848
[    2.122097] usb 7-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.122099] usb 7-2.2: Product: USB2.0 MFP
[    2.122100] usb 7-2.2: Manufacturer: EPSON
[    2.122102] usb 7-2.2: SerialNumber: 4B504A593031323429
[    2.199469] usb 7-2.3: new full-speed USB device number 4 using xhci_hcd
[    2.314257] usb 7-2.3: not running at top speed; connect to a high speed hub
[    2.315684] usb 7-2.3: New USB device found, idVendor=04f9, idProduct=003a
[    2.315686] usb 7-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.315688] usb 7-2.3: Product: HL-5350DN series
[    2.315689] usb 7-2.3: Manufacturer: Brother
[    2.315690] usb 7-2.3: SerialNumber: K0J807812
[    2.387451] usb 7-2.4: new full-speed USB device number 5 using xhci_hcd
[    2.505113] usb 7-2.4: New USB device found, idVendor=062a, idProduct=4101
[    2.505116] usb 7-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.505118] usb 7-2.4: Product: 2.4G Keyboard Mouse
[    2.505119] usb 7-2.4: Manufacturer: MOSART Semi.
[    2.505249] usb 7-2.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.509771] hidraw: raw HID events driver (C) Jiri Kosina
[    2.515096] usbcore: registered new interface driver usbhid
[    2.515101] usbhid: USB HID core driver
[    2.516592] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:15.1/0000:03:00.0/usb7/7-2/7-2.4/7-2.4:1.0/0003:062A:4101.0001/input/input6
[    2.533211] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    2.537121] scsi 6:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0903 PQ: 0 ANSI: 6
[    2.537452] sd 6:0:0:0: Attached scsi generic sg3 type 0
[    2.540923] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    2.571504] hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:03:00.0-2.4/input0
[    2.571818] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:15.1/0000:03:00.0/usb7/7-2/7-2.4/7-2.4:1.1/0003:062A:4101.0002/input/input7
[    2.627705] hid-generic 0003:062A:4101.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:03:00.0-2.4/input1
[    2.903519] clocksource: Switched to clocksource tsc
[    3.000357] random: nonblocking pool is initialized
[    3.568834] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    3.568957] systemd[1]: Detected architecture x86-64.
[    3.576387] systemd[1]: Set hostname to <vadee>.
[    5.976903] systemd[1]: Listening on Journal Socket.
[    5.977017] systemd[1]: Created slice System Slice.
[    5.987280] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    5.987301] systemd[1]: Reached target Encrypted Volumes.
[    5.987755] systemd[1]: Started Braille Device Support.
[    5.988317] systemd[1]: Mounting Debug File System...
[    5.988402] systemd[1]: Created slice User and Session Slice.
[    5.988462] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.988487] systemd[1]: Listening on Syslog Socket.
[    5.988547] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    5.988957] systemd[1]: Starting Set console keymap...
[    6.047272] systemd[1]: Starting Load Kernel Modules...
[    6.047493] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.079508] systemd[1]: Reached target Slices.
[    6.085221] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.085276] systemd[1]: Listening on fsck to fsckd communication Socket.
[    6.111147] systemd[1]: Mounting POSIX Message Queue File System...
[    6.111713] systemd[1]: Mounting Huge Pages File System...
[    6.111743] systemd[1]: Reached target User and Group Name Lookups.
[    6.112292] systemd[1]: Starting Uncomplicated firewall...
[    6.112395] systemd[1]: Listening on Journal Audit Socket.
[    6.112434] systemd[1]: Reached target Remote File Systems (Pre).
[    6.112449] systemd[1]: Reached target Remote File Systems.
[    6.113032] systemd[1]: Starting Journal Service...
[    6.113088] systemd[1]: Listening on udev Kernel Socket.
[    6.113161] systemd[1]: Listening on udev Control Socket.
[    6.113713] systemd[1]: Started Read required files in advance.
[    6.113844] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.331345] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.347268] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.425492] systemd[1]: Started Uncomplicated firewall.
[    6.474079] systemd[1]: Mounted Huge Pages File System.
[    6.474116] systemd[1]: Mounted Debug File System.
[    6.474129] systemd[1]: Mounted POSIX Message Queue File System.
[    6.677537] lp: driver loaded but no devices found
[    6.725732] ppdev: user-space parallel port driver
[    6.820380] systemd[1]: Started Load Kernel Modules.
[    6.831163] systemd[1]: Mounting FUSE Control File System...
[    6.831725] systemd[1]: Starting Apply Kernel Variables...
[    6.833671] systemd[1]: Mounted FUSE Control File System.
[    7.070699] systemd[1]: Started Set console keymap.
[    7.140243] systemd[1]: Started Journal Service.
[   10.656910] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[   11.004934] systemd-journald[263]: Received request to flush runtime journal from PID 1
[   11.934319] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   11.934430] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[   11.960630] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.060882] media: Linux media interface: v0.10
[   13.104753] usblp 7-2.2:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0848
[   13.107542] usblp 7-2.3:1.0: usblp2: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x003A
[   13.107567] usbcore: registered new interface driver usblp
[   13.132438] [drm] VGACON disable radeon kernel modesetting.
[   13.132458] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module!
[   13.223810] Linux video capture interface: v2.00
[   13.426417] usb 1-5: current rate 0 is different from the runtime rate 16000
[   13.430086] usb 1-5: current rate 0 is different from the runtime rate 24000
[   13.433628] usb 1-5: current rate 0 is different from the runtime rate 32000
[   13.437130] usb 1-5: current rate 0 is different from the runtime rate 48000
[   13.450418] usb 1-5: set resolution quirk: cval->res = 384
[   13.450609] usbcore: registered new interface driver snd-usb-audio
[   13.498518] AVX version of gcm_enc/dec engaged.
[   13.498520] AES CTR mode by8 optimization enabled
[   13.500158] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[   13.691161] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
[   13.800188] uvcvideo: Found UVC 1.00 device HD Webcam C525 (046d:0826)
[   13.805618] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   13.805622] snd_hda_codec_realtek hdaudioC2D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   13.805624] snd_hda_codec_realtek hdaudioC2D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   13.805626] snd_hda_codec_realtek hdaudioC2D0:    mono: mono_out=0x0
[   13.805628] snd_hda_codec_realtek hdaudioC2D0:    dig-out=0x11/0x0
[   13.805629] snd_hda_codec_realtek hdaudioC2D0:    inputs:
[   13.805632] snd_hda_codec_realtek hdaudioC2D0:      Front Mic=0x19
[   13.805633] snd_hda_codec_realtek hdaudioC2D0:      Rear Mic=0x18
[   13.805635] snd_hda_codec_realtek hdaudioC2D0:      Line=0x1a
[   13.812215] input: HD Webcam C525 as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.2/input/input9
[   13.812287] usbcore: registered new interface driver uvcvideo
[   13.812288] USB Video Class driver (1.1.1)
[   13.818561] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card2/input10
[   13.818621] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card2/input11
[   13.818675] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card2/input12
[   13.818727] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card2/input13
[   13.818780] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card2/input14
[   14.271550] kvm: Nested Virtualization enabled
[   14.271554] kvm: Nested Paging enabled
[   15.030916] audit: type=1400 audit(1522296936.374:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=683 comm="apparmor_parser"
[   15.030925] audit: type=1400 audit(1522296936.374:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=683 comm="apparmor_parser"
[   15.030931] audit: type=1400 audit(1522296936.374:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=683 comm="apparmor_parser"
[   15.030936] audit: type=1400 audit(1522296936.374:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=683 comm="apparmor_parser"
[   15.088125] audit: type=1400 audit(1522296936.430:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=682 comm="apparmor_parser"
[   15.088137] audit: type=1400 audit(1522296936.430:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=682 comm="apparmor_parser"
[   15.164921] audit: type=1400 audit(1522296936.506:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=684 comm="apparmor_parser"
[   15.164929] audit: type=1400 audit(1522296936.506:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=684 comm="apparmor_parser"
[   15.164933] audit: type=1400 audit(1522296936.506:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=684 comm="apparmor_parser"
[   15.164937] audit: type=1400 audit(1522296936.506:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=684 comm="apparmor_parser"
[   16.133117] asus_wmi: ASUS WMI generic driver loaded
[   16.138125] usb 1-5: reset high-speed USB device number 2 using ehci-pci
[   16.170663] asus_wmi: Initialization: 0x0
[   16.170688] asus_wmi: BIOS WMI version: 0.9
[   16.170730] asus_wmi: SFUN value: 0x0
[   16.170999] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input15
[   16.171114] asus_wmi: Number of fans: 1
[   17.697664] Adding 15929340k swap on /dev/sdb5.  Priority:-1 extents:1 across:15929340k FS
[   21.880495] cgroup: new mount options do not match the existing superblock, will be ignored
[   28.414119] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   28.891417] r8169 0000:04:00.0 eth0: link down
[   28.891442] r8169 0000:04:00.0 eth0: link down
[   28.891502] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   30.536930] usblp2: removed
[   30.540879] usblp 7-2.3:1.0: usblp2: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x003A
[   30.540999] usblp1: removed
[   30.550899] usblp 7-2.2:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0848
[   32.332424] r8169 0000:04:00.0 eth0: link up
[   32.332439] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   37.379235] usblp2: removed
[   37.383155] usblp 7-2.3:1.0: usblp2: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x003A
[   37.383277] usblp1: removed
[   37.393006] usblp 7-2.2:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0848
[   46.670224] usb 1-5: current rate 0 is different from the runtime rate 48000
[   46.673593] usb 1-5: current rate 0 is different from the runtime rate 48000
[   46.687417] usb 1-5: current rate 0 is different from the runtime rate 48000
[   46.690412] usb 1-5: current rate 0 is different from the runtime rate 48000
[44383.462121] usblp2: removed
[44425.983759] usblp 7-2.3:1.0: usblp2: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x003A
[44787.625582] usblp2: removed
[44832.399828] usblp 7-2.3:1.0: usblp2: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x003A
[50367.169937] usblp2: removed
[50408.191407] usblp 7-2.3:1.0: usblp2: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x003A
[162781.559809] usb 2-1: new high-speed USB device number 2 using ehci-pci
[162781.695232] usb 2-1: New USB device found, idVendor=04e8, idProduct=6860
[162781.695238] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[162781.695242] usb 2-1: Product: GT-P5210
[162781.695245] usb 2-1: Manufacturer: samsung
[162781.695247] usb 2-1: SerialNumber: 3200141583c3a000
[162781.749760] cdc_acm 2-1:1.1: ttyACM0: USB ACM device
[162781.750407] usbcore: registered new interface driver cdc_acm
[162781.750410] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[162786.374446] usb 2-1: USB disconnect, device number 2
[162786.376832] cdc_acm 2-1:1.1: failed to set dtr/rts
[162786.647240] usb 2-1: new high-speed USB device number 3 using ehci-pci
[162786.782641] usb 2-1: New USB device found, idVendor=04e8, idProduct=6860
[162786.782647] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[162786.782651] usb 2-1: Product: GT-P5210
[162786.782654] usb 2-1: Manufacturer: samsung
[162786.782656] usb 2-1: SerialNumber: 3200141583c3a000
[162786.784869] cdc_acm 2-1:1.1: ttyACM0: USB ACM device
[178081.640124] usb 2-1: USB disconnect, device number 3
vadee@vadee:~$ ls -l /dev | grep -i sd
brw-rw----  1 root disk      8,   0 mars  29 06:15 sda
brw-rw----  1 root disk      8,   2 mars  31 08:12 sda2
brw-rw----  1 root disk      8,  16 mars  29 06:15 sdb
brw-rw----  1 root disk      8,  17 mars  29 06:15 sdb1
brw-rw----  1 root disk      8,  18 mars  29 06:15 sdb2
brw-rw----  1 root disk      8,  21 mars  29 06:15 sdb5
brw-rw----  1 root disk      8,  32 mars  29 06:15 sdc
vadee@vadee:~$ sudo modprobe ata_piix
vadee@vadee:~$

goliath60

cqfd93:

voici ce que j'ai:

https://euasharefile.bureauveritas.com/public/file/w-KKRjZ7ZkCsLpQqWOPT6A/Capture%20du%202018-03-31%2009-19-11.png

[sub]Modération : merci d'utiliser des images de petite taille (300x300) ou des miniatures pointant sur ces images (Des hébergeurs comme Toile Libre, TDCT'Pix le permettent).[/sub]

cqfd93

Pour poster ton image, tu aurais pu l'éditer et ne garder que la fenêtre des propriétés que tu veux montrer et utiliser un hébergeur qui permet les miniatures cliquables, ça aurait fait une image bien plus légère !

Tu peux changer le choix concernant les photos, sinon qu'est-ce que ça donne quand tu coches la case « Ne jamais demander… » ?

goliath60

lorsque je passe la ligne photo en "ne rien faire"

même cinéma: "impossible de monter disque cd R vierge"
+
une fenêtre "vous venez d'insérer un cd vierge" que faire

(pour insérer des image, effectivement, je ne suis pas très au point)

cqfd93

Et en cochant la case que j'ai mentionnée ?

goliath60

il n'y a que
demander que faire
ne rien faire ouvrir le dossier

et là il est en "ne rien faire"

xubu1957

Bonjour,

Et dans cette réponse > [RÉSOLU] CD audio : impossible à monter ?

Le 08/01/2011, Zubrowkaa a écritEffectivement il me manquait trois paquets parmi ceux de ta liste (gvfs-bin, gvfs-backend et gvfscommon-dev) et la lecture de CD est de nouveau opérationnelle, merci beaucoup pour ton aide, j'passe le sujet en résolu ! Merci ! 🙂

goliath60

voici ce que j'ai:

vadee@vadee:~$  dpkg --get-selections | grep gvfs
deja-dup-backend-gvfs				install
gvfs:amd64					install
gvfs-backends					install
gvfs-bin					install
gvfs-common					install
gvfs-daemons					install
gvfs-fuse					install
gvfs-libs:amd64					install

donc je m'y colle pour les manquants

goliath60

d'après la liste dans le poste 4, il me manque:

libgvfscommon0
ligvfscommon-dev

je ne trouve pas comment les installer

une idée?

xubu1957

La réponse datant de 2011, ces paquets ont peut être été remplacés par d'autres !

_ _ _

Pour packages.ubuntu.com/xenial/gvfs

goliath60

j'ai peut etre quelque chose:

j'ai trouvé ça: 3.2 dans l'encadré orange

qui m'a amené à ça: au post 15

ce qui donne, si pas d'erreur: (c'est censé être dans une fenêtre blanche mais je sais pas faire)

# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
piix

lp

mais aussi:

vadee@vadee:~$  sudo gedit /etc/modules
[sudo] Mot de passe de vadee : 

(gedit:3609): Gtk-WARNING **: Calling Inhibit failed: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files

** (gedit:3609): WARNING **: Set document metadata failed: La définition de l’attribut metadata::gedit-spell-enabled n’est pas prise en charge

et donc...

erresse

Je ne suis pas sûr que tu ne suives pas une fausse piste...
Chez moi, j'ai ça dans les modules (rien) et seulement les mêmes éléments que toi pour gvfs :

user@user-mate:~$ cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

user@user-mate:~$ dpkg --get-selections | grep gvfs
gvfs:i386					install
gvfs-backends					install
gvfs-bin					install
gvfs-common					install
gvfs-daemons					install
gvfs-fuse					install
gvfs-libs:i386					install
user@user-mate:~$

Pour moi, si l'introduction d'un disque (CD ou DVD) dans le lecteur lance directement l'application de gravure, c'est certainement une association qui le provoque.
J'ai remarqué dans ton message #13 que tu as aussi des choix (Demander, Ne rien faire, Ouvrir) autres que le démarrage automatique du logiciel de gravure. As-tu essayé de choisir "Ouvrir" pour voir avec quoi il ouvre ? Ou "Ne rien faire", puis d'ouvrir le média (qui doit apparaître sur ton bureau) avec le gestionnaire de fichiers ?
Si tu peux voir les répertoires et/ou fichiers que contient le disque dans le gestionnaire de fichiers, tu dois aussi pouvoir les afficher...
Un média CD/DVD n'est traité automatiquement que pour de la vidéo ou de l'audio, s'il contient des photos, il faut l'ouvrir dans le gestionnaire de fichiers pour y avoir accès.

goliath60

ok pour la comparaison de gvfs: cela veut dire que c'est ok chez moi

donc, si je choisi :
ne rien faire:
le cd est reconnu par l'ordinateur "disque cd-R vierge" (si je passe la souris sur l'icone "burn:///")
si je clic droit dessus je ne peut que ouvrir / ajouter le signet / éjecter / formater
clic sur ouvrir ouvre le logiciel de gravure, + messages

https://euasharefile.bureauveritas.com/public/file/1FnKfG_2H0_HOigU1zGV8A/Capture%20du%202018-03-31%2016-25-38.png

ce que je constate c'est que les cd (car il y en a plusieurs) sont reconnus en cd-r vierge, l'icone cd-r vierge s'affiche, mais je ne peux pas accéder au contenu du cd
par le gestionnaire de fichier, idem, je dois passer par l'icone cd-r vierge qui m'envoi, dans tous les cas ver la gravure cd

(

[sub]Modération : merci d'utiliser des images de petite taille (300x300) ou des miniatures pointant sur ces images (Des hébergeurs comme Toile Libre, TDCT'Pix le permettent).[/sub]

Page suivante »