Alors...
A chaque essai j'ai activé / désactivé le touchpad avec le bouton approprié, sans succès (car je le rappelle ce bouton fonctionnait également au premier boot)
Voici les retours demandés :
lsmod
Module Size Used by
rfcomm 77824 2
ccm 20480 3
bnep 20480 2
nls_iso8859_1 16384 1
intel_rapl 20480 0
x86_pkg_temp_thermal 16384 0
intel_powerclamp 16384 0
coretemp 16384 0
kvm_intel 163840 0
kvm 598016 1 kvm_intel
snd_hda_codec_hdmi 49152 1
arc4 16384 2
irqbypass 16384 1 kvm
snd_hda_codec_realtek 98304 1
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
crct10dif_pclmul 16384 0
crc32_pclmul 16384 0
ghash_clmulni_intel 16384 0
iwldvm 229376 0
pcbc 16384 0
snd_hda_intel 40960 3
mac80211 778240 1 iwldvm
snd_hda_codec 126976 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
aesni_intel 188416 2
aes_x86_64 20480 1 aesni_intel
snd_hda_core 81920 5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hwdep 20480 1 snd_hda_codec
btusb 45056 0
crypto_simd 16384 1 aesni_intel
snd_pcm 98304 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
glue_helper 16384 1 aesni_intel
btrtl 16384 1 btusb
input_leds 16384 0
cryptd 24576 3 crypto_simd,ghash_clmulni_intel,aesni_intel
snd_seq_midi 16384 0
btbcm 16384 1 btusb
iwlwifi 282624 1 iwldvm
snd_seq_midi_event 16384 1 snd_seq_midi
serio_raw 16384 0
btintel 20480 1 btusb
intel_cstate 20480 0
intel_rapl_perf 16384 0
bluetooth 544768 31 btrtl,btintel,bnep,btbcm,rfcomm,btusb
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 65536 2 snd_seq_midi_event,snd_seq_midi
ecdh_generic 24576 1 bluetooth
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
cfg80211 626688 3 iwlwifi,mac80211,iwldvm
snd_timer 32768 2 snd_seq,snd_pcm
lpc_ich 24576 0
snd 81920 17 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
soundcore 16384 1 snd
mei_me 40960 0
mei 90112 1 mei_me
shpchp 36864 0
mac_hid 16384 0
parport_pc 36864 0
ppdev 20480 0
lp 20480 0
parport 49152 3 lp,parport_pc,ppdev
autofs4 40960 2
hid_generic 16384 0
usbhid 49152 0
hid 122880 2 hid_generic,usbhid
i915 1671168 83
i2c_algo_bit 16384 1 i915
drm_kms_helper 172032 1 i915
psmouse 147456 0
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
fb_sys_fops 16384 1 drm_kms_helper
ahci 36864 3
drm 401408 6 i915,drm_kms_helper
libahci 32768 1 ahci
r8169 86016 0
mii 16384 1 r8169
video 40960 1 i915
cat /proc/bus/input/devices
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=3
B: KEY=4000 0 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
U: Uniq=
H: Handlers=event2
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0011 Vendor=0001 Product=0001 Version=ab83
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input4
U: Uniq=
H: Handlers=sysrq kbd event4 leds
B: PROP=0
B: EV=120013
B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
U: Uniq=
H: Handlers=kbd event5
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0003 Vendor=15ca Product=00c3 Version=0110
N: Name="USB Optical Mouse"
P: Phys=usb-0000:00:14.0-3/input0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:15CA:00C3.0001/input/input8
U: Uniq=
H: Handlers=mouse0 event6
B: PROP=0
B: EV=17
B: KEY=70000 0 0 0 0
B: REL=103
B: MSC=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
U: Uniq=
H: Handlers=event7
B: PROP=0
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
U: Uniq=
H: Handlers=event8
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
U: Uniq=
H: Handlers=event9
B: PROP=0
B: EV=21
B: SW=140
Après redémarrage
cat /var/log/Xorg.0.log
[ 4.616]
X.Org X Server 1.19.5
Release Date: 2017-10-12
[ 4.616] X Protocol Version 11, Revision 0
[ 4.616] Build Operating System: Linux 4.4.0-101-generic x86_64 Ubuntu
[ 4.616] Current Operating System: Linux joker 4.16.2-041602-generic #201804121130 SMP Thu Apr 12 11:32:17 UTC 2018 x86_64
[ 4.616] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.16.2-041602-generic root=UUID=a02deb83-27fd-45d9-b182-c07f76407262 ro quiet splash vt.handoff=7
[ 4.616] Build Date: 24 November 2017 09:44:25AM
[ 4.616] xorg-server 2:1.19.5-0ubuntu2~16.04.1 (For technical support please see http://www.ubuntu.com/support)
[ 4.616] Current version of pixman: 0.33.6
[ 4.616] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.616] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.616] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 15 12:05:19 2018
[ 4.617] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.617] (==) No Layout section. Using the first Screen section.
[ 4.617] (==) No screen section available. Using defaults.
[ 4.617] (**) |-->Screen "Default Screen Section" (0)
[ 4.617] (**) | |-->Monitor "<default monitor>"
[ 4.617] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4.617] (==) Automatically adding devices
[ 4.617] (==) Automatically enabling devices
[ 4.617] (==) Automatically adding GPU devices
[ 4.617] (==) Automatically binding GPU devices
[ 4.617] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 4.618] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 4.618] Entry deleted from font path.
[ 4.618] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 4.618] Entry deleted from font path.
[ 4.618] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 4.618] Entry deleted from font path.
[ 4.618] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 4.618] Entry deleted from font path.
[ 4.618] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 4.618] Entry deleted from font path.
[ 4.618] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 4.618] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 4.618] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.618] (II) Loader magic: 0x5580c19d0e00
[ 4.618] (II) Module ABI versions:
[ 4.618] X.Org ANSI C Emulation: 0.4
[ 4.618] X.Org Video Driver: 23.0
[ 4.618] X.Org XInput driver : 24.1
[ 4.618] X.Org Server Extension : 10.0
[ 4.618] (++) using VT number 7
[ 4.618] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 4.619] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4.634] (--) PCI:*(0:0:2:0) 8086:0166:1b50:571c rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 4.634] (II) LoadModule: "glx"
[ 4.635] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.644] (II) Module glx: vendor="X.Org Foundation"
[ 4.644] compiled for 1.19.5, module version = 1.0.0
[ 4.644] ABI class: X.Org Server Extension, version 10.0
[ 4.644] (==) Matched modesetting as autoconfigured driver 0
[ 4.644] (==) Matched fbdev as autoconfigured driver 1
[ 4.644] (==) Matched vesa as autoconfigured driver 2
[ 4.644] (==) Assigned the driver to the xf86ConfigLayout
[ 4.644] (II) LoadModule: "modesetting"
[ 4.644] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 4.644] (II) Module modesetting: vendor="X.Org Foundation"
[ 4.644] compiled for 1.19.5, module version = 1.19.5
[ 4.644] Module class: X.Org Video Driver
[ 4.644] ABI class: X.Org Video Driver, version 23.0
[ 4.644] (II) LoadModule: "fbdev"
[ 4.644] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 4.644] (II) Module fbdev: vendor="X.Org Foundation"
[ 4.644] compiled for 1.19.3, module version = 0.4.4
[ 4.644] Module class: X.Org Video Driver
[ 4.644] ABI class: X.Org Video Driver, version 23.0
[ 4.644] (II) LoadModule: "vesa"
[ 4.645] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 4.645] (II) Module vesa: vendor="X.Org Foundation"
[ 4.645] compiled for 1.19.3, module version = 2.3.4
[ 4.645] Module class: X.Org Video Driver
[ 4.645] ABI class: X.Org Video Driver, version 23.0
[ 4.645] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 4.645] (II) FBDEV: driver for framebuffer: fbdev
[ 4.645] (II) VESA: driver for VESA chipsets: vesa
[ 4.666] (II) modeset(0): using drv /dev/dri/card0
[ 4.666] (WW) Falling back to old probe method for fbdev
[ 4.666] (II) Loading sub module "fbdevhw"
[ 4.666] (II) LoadModule: "fbdevhw"
[ 4.666] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 4.666] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 4.666] compiled for 1.19.5, module version = 0.0.2
[ 4.666] ABI class: X.Org Video Driver, version 23.0
[ 4.666] (WW) Falling back to old probe method for vesa
[ 4.666] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.666] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 4.666] (==) modeset(0): RGB weight 888
[ 4.666] (==) modeset(0): Default visual is TrueColor
[ 4.666] (II) Loading sub module "glamoregl"
[ 4.666] (II) LoadModule: "glamoregl"
[ 4.666] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 4.673] (II) Module glamoregl: vendor="X.Org Foundation"
[ 4.673] compiled for 1.19.5, module version = 1.0.0
[ 4.673] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.673] (II) glamor: OpenGL accelerated X.org driver based.
[ 4.691] (II) glamor: EGL version 1.4 (DRI2):
[ 4.694] (II) modeset(0): glamor initialized
[ 4.694] (II) modeset(0): Output LVDS-1 has no monitor section
[ 4.695] (II) modeset(0): Output VGA-1 has no monitor section
[ 4.697] (II) modeset(0): Output HDMI-1 has no monitor section
[ 4.697] (II) modeset(0): Output DP-1 has no monitor section
[ 4.697] (II) modeset(0): EDID for output LVDS-1
[ 4.697] (II) modeset(0): Printing probed modes for output LVDS-1
[ 4.697] (II) modeset(0): Modeline "1366x768"x59.9 72.00 1366 1380 1436 1502 768 769 772 800 -hsync -vsync (47.9 kHz P)
[ 4.697] (II) modeset(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 4.697] (II) modeset(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 4.697] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 4.697] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 4.697] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 4.697] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 4.697] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 4.697] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 4.697] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 4.697] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 4.697] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 4.697] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 4.697] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 4.697] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 4.697] (II) modeset(0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[ 4.697] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 4.697] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 4.697] (II) modeset(0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[ 4.697] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 4.697] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 4.697] (II) modeset(0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[ 4.697] (II) modeset(0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[ 4.697] (II) modeset(0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[ 4.697] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 4.697] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 4.697] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 4.697] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 4.698] (II) modeset(0): EDID for output VGA-1
[ 4.700] (II) modeset(0): EDID for output HDMI-1
[ 4.700] (II) modeset(0): EDID for output DP-1
[ 4.700] (II) modeset(0): Output LVDS-1 connected
[ 4.700] (II) modeset(0): Output VGA-1 disconnected
[ 4.700] (II) modeset(0): Output HDMI-1 disconnected
[ 4.700] (II) modeset(0): Output DP-1 disconnected
[ 4.700] (II) modeset(0): Using exact sizes for initial modes
[ 4.700] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[ 4.700] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.700] (==) modeset(0): DPI set to (96, 96)
[ 4.700] (II) Loading sub module "fb"
[ 4.700] (II) LoadModule: "fb"
[ 4.700] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4.700] (II) Module fb: vendor="X.Org Foundation"
[ 4.700] compiled for 1.19.5, module version = 1.0.0
[ 4.700] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.700] (II) UnloadModule: "fbdev"
[ 4.700] (II) Unloading fbdev
[ 4.700] (II) UnloadSubModule: "fbdevhw"
[ 4.700] (II) Unloading fbdevhw
[ 4.700] (II) UnloadModule: "vesa"
[ 4.700] (II) Unloading vesa
[ 4.700] (==) Depth 24 pixmap format is 32 bpp
[ 4.772] (==) modeset(0): Backing store enabled
[ 4.772] (==) modeset(0): Silken mouse enabled
[ 4.772] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 4.800] (==) modeset(0): DPMS enabled
[ 4.800] (II) modeset(0): [DRI2] Setup complete
[ 4.800] (II) modeset(0): [DRI2] DRI driver: i965
[ 4.800] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 4.800] (--) RandR disabled
[ 4.804] (II) SELinux: Disabled on system
[ 4.809] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 4.809] (II) AIGLX: enabled GLX_ARB_create_context
[ 4.809] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 4.809] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 4.809] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 4.809] (II) AIGLX: enabled GLX_SGI_swap_control
[ 4.809] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 4.809] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 4.809] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 4.809] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 4.809] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 4.810] (II) AIGLX: Loaded and initialized i965
[ 4.810] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4.811] (II) modeset(0): Damage tracking initialized
[ 4.811] (II) modeset(0): Setting screen physical size to 361 x 203
[ 4.845] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 4.845] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4.845] (II) LoadModule: "evdev"
[ 4.845] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4.847] (II) Module evdev: vendor="X.Org Foundation"
[ 4.847] compiled for 1.19.3, module version = 2.10.5
[ 4.847] Module class: X.Org XInput Driver
[ 4.847] ABI class: X.Org XInput driver, version 24.1
[ 4.847] (II) Using input driver 'evdev' for 'Power Button'
[ 4.847] (**) Power Button: always reports core events
[ 4.847] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 4.847] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4.847] (--) evdev: Power Button: Found keys
[ 4.847] (II) evdev: Power Button: Configuring as keyboard
[ 4.847] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 4.847] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4.847] (**) Option "xkb_rules" "evdev"
[ 4.847] (**) Option "xkb_model" "pc105"
[ 4.847] (**) Option "xkb_layout" "fr"
[ 4.865] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 4.865] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 4.865] (II) Using input driver 'evdev' for 'Video Bus'
[ 4.865] (**) Video Bus: always reports core events
[ 4.865] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 4.865] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 4.865] (--) evdev: Video Bus: Found keys
[ 4.865] (II) evdev: Video Bus: Configuring as keyboard
[ 4.865] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event5"
[ 4.865] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 4.865] (**) Option "xkb_rules" "evdev"
[ 4.865] (**) Option "xkb_model" "pc105"
[ 4.865] (**) Option "xkb_layout" "fr"
[ 4.865] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 4.865] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4.865] (II) Using input driver 'evdev' for 'Power Button'
[ 4.865] (**) Power Button: always reports core events
[ 4.865] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 4.866] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4.866] (--) evdev: Power Button: Found keys
[ 4.866] (II) evdev: Power Button: Configuring as keyboard
[ 4.866] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 4.866] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 4.866] (**) Option "xkb_rules" "evdev"
[ 4.866] (**) Option "xkb_model" "pc105"
[ 4.866] (**) Option "xkb_layout" "fr"
[ 4.866] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 4.866] (II) No input driver specified, ignoring this device.
[ 4.866] (II) This device may have been added with another device file.
[ 4.866] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 4.867] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 4.867] (II) Using input driver 'evdev' for 'Sleep Button'
[ 4.867] (**) Sleep Button: always reports core events
[ 4.867] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[ 4.867] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 4.867] (--) evdev: Sleep Button: Found keys
[ 4.867] (II) evdev: Sleep Button: Configuring as keyboard
[ 4.867] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[ 4.867] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 4.867] (**) Option "xkb_rules" "evdev"
[ 4.867] (**) Option "xkb_model" "pc105"
[ 4.867] (**) Option "xkb_layout" "fr"
[ 4.868] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 4.868] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 4.868] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 4.868] (**) USB Optical Mouse: always reports core events
[ 4.868] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 4.928] (--) evdev: USB Optical Mouse: Vendor 0x15ca Product 0xc3
[ 4.928] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[ 4.928] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 4.928] (--) evdev: USB Optical Mouse: Found relative axes
[ 4.928] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 4.928] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 4.928] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 4.928] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 4.928] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4.928] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:15CA:00C3.0001/input/input8/event6"
[ 4.928] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 10)
[ 4.928] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 4.928] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 4.928] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 4.928] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 4.928] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 4.928] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 4.928] (II) No input driver specified, ignoring this device.
[ 4.928] (II) This device may have been added with another device file.
[ 4.929] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[ 4.929] (II) No input driver specified, ignoring this device.
[ 4.929] (II) This device may have been added with another device file.
[ 4.929] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[ 4.929] (II) No input driver specified, ignoring this device.
[ 4.929] (II) This device may have been added with another device file.
[ 4.929] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[ 4.929] (II) No input driver specified, ignoring this device.
[ 4.929] (II) This device may have been added with another device file.
[ 4.930] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 4.930] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 4.930] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 4.930] (**) AT Translated Set 2 keyboard: always reports core events
[ 4.930] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 4.930] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 4.930] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 4.930] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 4.930] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 4.930] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 4.930] (**) Option "xkb_rules" "evdev"
[ 4.930] (**) Option "xkb_model" "pc105"
[ 4.930] (**) Option "xkb_layout" "fr"
dmesg
[ 0.000000] Linux version 4.16.2-041602-generic (kernel@kathleen) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3.2)) #201804121130 SMP Thu Apr 12 11:32:17 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.16.2-041602-generic root=UUID=a02deb83-27fd-45d9-b182-c07f76407262 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d9921fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9922000-0x00000000da060fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da061000-0x00000000da070fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000da071000-0x00000000da188fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000da189000-0x00000000da6c5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da6c6000-0x00000000da75efff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000da75f000-0x00000000da75ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da760000-0x00000000da7a2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000da7a3000-0x00000000dadf5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dadf6000-0x00000000daff1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000daff2000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xda065000 ACPI 2.0=0xda065000 SMBIOS=0xf04c0 MPS=0xfd410
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: wortmann To be filled by O.E.M./ChiefRiver, BIOS X300V TR.2 09/21/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x11f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0DB800000 mask FFF800000 uncachable
[ 0.000000] 5 base 11F800000 mask FFF800000 uncachable
[ 0.000000] 6 base 11F600000 mask FFFE00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 4014M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 8 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd6f0-0x000fd6ff] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576
[ 0.000000] BRK [0x61740000, 0x61740fff] PGTABLE
[ 0.000000] BRK [0x61741000, 0x61741fff] PGTABLE
[ 0.000000] BRK [0x61742000, 0x61742fff] PGTABLE
[ 0.000000] BRK [0x61743000, 0x61743fff] PGTABLE
[ 0.000000] BRK [0x61744000, 0x61744fff] PGTABLE
[ 0.000000] BRK [0x61745000, 0x61745fff] PGTABLE
[ 0.000000] BRK [0x61746000, 0x61746fff] PGTABLE
[ 0.000000] BRK [0x61747000, 0x61747fff] PGTABLE
[ 0.000000] BRK [0x61748000, 0x61748fff] PGTABLE
[ 0.000000] BRK [0x61749000, 0x61749fff] PGTABLE
[ 0.000000] BRK [0x6174a000, 0x6174afff] PGTABLE
[ 0.000000] BRK [0x6174b000, 0x6174bfff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x320d6000-0x35062fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000DA065000 000024 (v02 WORTMA)
[ 0.000000] ACPI: XSDT 0x00000000DA065088 00008C (v01 WORTMA WORTMANN 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DA06E3D8 00010C (v05 WORTMA WORTMANN 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DA0651A0 009231 (v02 WORTMA WORTMANN 00000022 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000DA187080 000040
[ 0.000000] ACPI: APIC 0x00000000DA06E4E8 000072 (v03 WORTMA WORTMANN 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DA06E560 000044 (v01 WORTMA WORTMANN 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000DA06E5A8 00003C (v01 WORTMA WORTMANN 01072009 MSFT 00000097)
[ 0.000000] ACPI: MSDM 0x00000000DA06E5E8 000055 (v03 WORTMA WORTMANN 01072009 AMI 00010013)
[ 0.000000] ACPI: SLIC 0x00000000DA06E640 000176 (v01 WORTMA WORTMANN 01072009 AMI 00010013)
[ 0.000000] ACPI: HPET 0x00000000DA06E7B8 000038 (v01 WORTMA WORTMANN 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DA06E7F0 000315 (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DA06EB08 0008E4 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000DA06F3F0 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: ECDT 0x00000000DA06FE88 0000C1 (v01 WORTMA WORTMANN 01072009 AMI. 00000005)
[ 0.000000] ACPI: DMAR 0x00000000DA06FF50 0000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: BGRT 0x00000000DA070008 000038 (v00 WORTMA WORTMANN 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x11f5d3000-0x11f5fdfff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000011f5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ 0.000000] node 0: [mem 0x0000000040005000-0x00000000d9921fff]
[ 0.000000] node 0: [mem 0x00000000da75f000-0x00000000da75ffff]
[ 0.000000] node 0: [mem 0x00000000da7a3000-0x00000000dadf5fff]
[ 0.000000] node 0: [mem 0x00000000daff2000-0x00000000daffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011f5fffff]
[ 0.000000] On node 0 totalpages: 1020705
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 26 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13879 pages used for memmap
[ 0.000000] DMA32 zone: 888195 pages, LIFO batch:31
[ 0.000000] Normal zone: 2008 pages used for memmap
[ 0.000000] Normal zone: 128512 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9922000-0xda060fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda061000-0xda070fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda071000-0xda188fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda189000-0xda6c5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda6c6000-0xda75efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda760000-0xda7a2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdadf6000-0xdaff1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1004728
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.16.2-041602-generic root=UUID=a02deb83-27fd-45d9-b182-c07f76407262 ro quiet splash vt.handoff=7
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3680216K/4082820K available (12300K kernel code, 2478K rwdata, 4244K rodata, 2404K init, 2416K bss, 402604K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39348 entries in 154 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180105
[ 0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] DMAR: Host address width 36
[ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.000000] DMAR: RMRR base: 0x000000d9db3000 end: 0x000000d9dcffff
[ 0.000000] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[ 0.000000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.000000] x2apic enabled
[ 0.000000] Switched APIC routing to cluster x2apic.
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 1795.880 MHz processor
[ 0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19e2f5a71a1, max_idle_ns: 440795238425 ns
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.76 BogoMIPS (lpj=7183520)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: becoming mindful.
[ 0.024000] AppArmor: AppArmor initialized
[ 0.024000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.024000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.024000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.024000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.024000] CPU: Physical Processor ID: 0
[ 0.024000] CPU: Processor Core ID: 0
[ 0.024000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.024000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.024000] mce: CPU supports 7 MCE banks
[ 0.024000] CPU0: Thermal monitoring enabled (TM1)
[ 0.024000] process: using mwait in idle threads
[ 0.024000] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.024000] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.024000] Spectre V2 : Mitigation: Full generic retpoline
[ 0.024000] Freeing SMP alternatives memory: 36K
[ 0.038111] TSC deadline timer enabled
[ 0.038115] smpboot: CPU0: Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.038219] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.038249] ... version: 3
[ 0.038250] ... bit width: 48
[ 0.038251] ... generic registers: 4
[ 0.038252] ... value mask: 0000ffffffffffff
[ 0.038253] ... max period: 00007fffffffffff
[ 0.038254] ... fixed-purpose events: 3
[ 0.038255] ... event mask: 000000070000000f
[ 0.038305] Hierarchical SRCU implementation.
[ 0.039515] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.039536] smp: Bringing up secondary CPUs ...
[ 0.039650] x86: Booting SMP configuration:
[ 0.039652] .... node #0, CPUs: #1 #2 #3
[ 0.044069] smp: Brought up 1 node, 4 CPUs
[ 0.044069] smpboot: Max logical packages: 1
[ 0.044069] smpboot: Total of 4 processors activated (14367.04 BogoMIPS)
[ 0.048293] devtmpfs: initialized
[ 0.048293] x86/mm: Memory block size: 128MB
[ 0.048596] evm: security.selinux
[ 0.048597] evm: security.SMACK64
[ 0.048598] evm: security.SMACK64EXEC
[ 0.048598] evm: security.SMACK64TRANSMUTE
[ 0.048599] evm: security.SMACK64MMAP
[ 0.048600] evm: security.apparmor
[ 0.048601] evm: security.ima
[ 0.048601] evm: security.capability
[ 0.048621] PM: Registering ACPI NVS region [mem 0xda071000-0xda188fff] (1146880 bytes)
[ 0.048621] PM: Registering ACPI NVS region [mem 0xda760000-0xda7a2fff] (274432 bytes)
[ 0.048621] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.048621] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.048621] pinctrl core: initialized pinctrl subsystem
[ 0.048621] RTC time: 10:05:13, date: 04/15/18
[ 0.048621] NET: Registered protocol family 16
[ 0.048621] audit: initializing netlink subsys (disabled)
[ 0.048621] audit: type=2000 audit(1523786713.048:1): state=initialized audit_enabled=0 res=1
[ 0.048621] cpuidle: using governor ladder
[ 0.048621] cpuidle: using governor menu
[ 0.048621] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.048621] ACPI: bus type PCI registered
[ 0.048621] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.048621] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.048621] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.048621] PCI: Using configuration type 1 for base access
[ 0.048621] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.052016] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.052111] ACPI: Added _OSI(Module Device)
[ 0.052112] ACPI: Added _OSI(Processor Device)
[ 0.052113] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.052114] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.052119] ACPI: EC: EC started
[ 0.052120] ACPI: EC: interrupt blocked
[ 0.064506] ACPI: \: Used as first EC
[ 0.064509] ACPI: \: GPE=0x0, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.064511] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.064740] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.088961] ACPI: Dynamic OEM Table Load:
[ 0.088971] ACPI: SSDT 0xFFFF928059954000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.089213] ACPI: Dynamic OEM Table Load:
[ 0.089213] ACPI: SSDT 0xFFFF928059A88000 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.089218] ACPI: Dynamic OEM Table Load:
[ 0.089218] ACPI: SSDT 0xFFFF928059A55E00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.093224] ACPI: Interpreter enabled
[ 0.093256] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.093257] ACPI: Using IOAPIC for interrupt routing
[ 0.093302] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.093641] ACPI: Enabled 8 GPEs in block 00 to 3F
[ 0.106602] ACPI: Power Resource [FN00] (off)
[ 0.106745] ACPI: Power Resource [FN01] (off)
[ 0.106884] ACPI: Power Resource [FN02] (off)
[ 0.107023] ACPI: Power Resource [FN03] (off)
[ 0.107159] ACPI: Power Resource [FN04] (off)
[ 0.108339] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.108347] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.108873] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.109209] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.109211] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.110243] PCI host bridge to bus 0000:00
[ 0.110247] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.110249] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.110251] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.110253] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.110255] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.110257] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.110259] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.110261] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[ 0.110263] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.110274] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.110429] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.110445] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.110454] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.110460] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.110478] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.110674] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.110705] pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[ 0.110792] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.110928] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.110959] pci 0000:00:16.0: reg 0x10: [mem 0xf7d1b000-0xf7d1b00f 64bit]
[ 0.111047] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.111183] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.111210] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d18000-0xf7d183ff]
[ 0.111310] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.111444] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.111468] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d10000-0xf7d13fff 64bit]
[ 0.111551] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.111691] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.111798] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.111941] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.112050] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.112205] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.112233] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d17000-0xf7d173ff]
[ 0.112333] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.112465] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 0.112712] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.112735] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.112745] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.112755] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.112764] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.112774] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.112784] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d16000-0xf7d167ff]
[ 0.112836] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.112964] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.112990] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d15000-0xf7d150ff 64bit]
[ 0.113014] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.113291] pci 0000:01:00.0: [8086:0887] type 00 class 0x028000
[ 0.113382] pci 0000:01:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
[ 0.113662] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.124109] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.124117] pci 0000:00:1c.0: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.124222] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.124263] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.124300] pci 0000:02:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 0.124324] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.124464] pci 0000:02:00.0: supports D1 D2
[ 0.124466] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.136055] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.136060] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.136070] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.137486] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.137601] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.137715] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.137828] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.137940] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.138052] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.138165] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.138277] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.138786] ACPI: EC: interrupt unblocked
[ 0.138795] ACPI: EC: event unblocked
[ 0.138817] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x0, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.138819] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events
[ 0.138915] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.138915] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.138915] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.138915] vgaarb: loaded
[ 0.138915] SCSI subsystem initialized
[ 0.138915] libata version 3.00 loaded.
[ 0.138915] ACPI: bus type USB registered
[ 0.138915] usbcore: registered new interface driver usbfs
[ 0.138915] usbcore: registered new interface driver hub
[ 0.138915] usbcore: registered new device driver usb
[ 0.138915] EDAC MC: Ver: 3.0.0
[ 0.138915] Registered efivars operations
[ 0.151842] PCI: Using ACPI for IRQ routing
[ 0.153810] PCI: pci_cache_line_size set to 64 bytes
[ 0.153920] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.153922] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.153923] e820: reserve RAM buffer [mem 0xd9922000-0xdbffffff]
[ 0.153926] e820: reserve RAM buffer [mem 0xda760000-0xdbffffff]
[ 0.153927] e820: reserve RAM buffer [mem 0xdadf6000-0xdbffffff]
[ 0.153929] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.153931] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
[ 0.154055] NetLabel: Initializing
[ 0.154057] NetLabel: domain hash size = 128
[ 0.154057] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.154076] NetLabel: unlabeled traffic allowed by default
[ 0.154097] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.154097] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.156020] clocksource: Switched to clocksource tsc-early
[ 0.171082] VFS: Disk quotas dquot_6.6.0
[ 0.171105] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.171229] AppArmor: AppArmor Filesystem Enabled
[ 0.171264] pnp: PnP ACPI init
[ 0.171444] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.171452] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.171586] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.171589] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.171591] system 00:01: [io 0x1100-0x110f] has been reserved
[ 0.171594] system 00:01: [io 0xffff] has been reserved
[ 0.171596] system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.171599] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.171601] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.171605] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.171611] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.171645] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.171726] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.171732] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.171948] system 00:04: [io 0x0680-0x068f] has been reserved
[ 0.171951] system 00:04: [io 0x0a10-0x0a1f] has been reserved
[ 0.171956] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.172052] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.172058] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.188137] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.188215] pnp 00:07: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.188623] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.188626] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.188629] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.188631] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.188634] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.188636] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.188639] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.188641] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.188644] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.188646] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.188648] system 00:08: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 0.188654] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.188961] system 00:09: [mem 0x20000000-0x201fffff] has been reserved
[ 0.188963] system 00:09: [mem 0x40004000-0x40004fff] has been reserved
[ 0.188969] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.188994] pnp: PnP ACPI: found 10 devices
[ 0.195202] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.195236] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.195244] pci 0000:00:1c.0: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.195256] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.195260] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.195270] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.195280] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.195282] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.195285] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.195287] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.195289] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.195291] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.195294] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.195296] pci_bus 0000:00: resource 11 [mem 0xdfa00000-0xfeafffff window]
[ 0.195298] pci_bus 0000:01: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.195301] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.195303] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.195466] NET: Registered protocol family 2
[ 0.195721] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.195743] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.195827] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.195930] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.195969] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.195988] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.196067] NET: Registered protocol family 1
[ 0.196084] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.244205] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.244256] Unpacking initramfs...
[ 1.307078] Freeing initrd memory: 48692K
[ 1.307164] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.307168] software IO TLB [mem 0xc9987000-0xcd987000] (64MB) mapped at [000000001a525f40-00000000a8f7d873]
[ 1.307466] Scanning for low memory corruption every 60 seconds
[ 1.308309] Initialise system trusted keyrings
[ 1.308321] Key type blacklist registered
[ 1.308364] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 1.310049] zbud: loaded
[ 1.310729] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.310956] fuse init (API version 7.26)
[ 1.312368] Key type asymmetric registered
[ 1.312370] Asymmetric key parser 'x509' registered
[ 1.312415] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.312456] io scheduler noop registered
[ 1.312457] io scheduler deadline registered
[ 1.312513] io scheduler cfq registered (default)
[ 1.313160] efifb: probing for efifb
[ 1.313174] efifb: framebuffer at 0xe0000000, using 4160k, total 4160k
[ 1.313175] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 1.313176] efifb: scrolling: redraw
[ 1.313178] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.317309] Console: switching to colour frame buffer device 170x48
[ 1.321213] fb0: EFI VGA frame buffer device
[ 1.321226] intel_idle: MWAIT substates: 0x21120
[ 1.321228] intel_idle: v0.4.1 model 0x3A
[ 1.321402] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.336094] ACPI: AC Adapter [AC0] (off-line)
[ 1.336186] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 1.336197] ACPI: Sleep Button [SLPB]
[ 1.336238] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.336320] ACPI: Power Button [PWRB]
[ 1.336390] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 1.336398] ACPI: Lid Switch [LID0]
[ 1.336447] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.336557] ACPI: Power Button [PWRF]
[ 1.416234] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.416236] ACPI: Thermal Zone [TZ00] (50 C)
[ 1.464118] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.464120] ACPI: Thermal Zone [TZ01] (50 C)
[ 1.464306] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.872158] ACPI: Battery Slot [BAT0] (battery present)
[ 1.872482] Linux agpgart interface v0.103
[ 1.874886] loop: module loaded
[ 1.875348] libphy: Fixed MDIO Bus: probed
[ 1.875350] tun: Universal TUN/TAP device driver, 1.6
[ 1.875412] PPP generic driver version 2.4.2
[ 1.875487] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.875491] ehci-pci: EHCI PCI platform driver
[ 1.875687] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.875695] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.875711] ehci-pci 0000:00:1a.0: debug port 2
[ 1.879614] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.879636] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d18000
[ 1.892028] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.892084] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.892086] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.892089] usb usb1: Product: EHCI Host Controller
[ 1.892091] usb usb1: Manufacturer: Linux 4.16.2-041602-generic ehci_hcd
[ 1.892092] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.892241] hub 1-0:1.0: USB hub found
[ 1.892252] hub 1-0:1.0: 2 ports detected
[ 1.892614] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.892621] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.892636] ehci-pci 0000:00:1d.0: debug port 2
[ 1.896551] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.896569] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d17000
[ 1.912031] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.912089] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.912092] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.912094] usb usb2: Product: EHCI Host Controller
[ 1.912096] usb usb2: Manufacturer: Linux 4.16.2-041602-generic ehci_hcd
[ 1.912098] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.912241] hub 2-0:1.0: USB hub found
[ 1.912250] hub 2-0:1.0: 2 ports detected
[ 1.912448] ehci-platform: EHCI generic platform driver
[ 1.912462] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.912466] ohci-pci: OHCI PCI platform driver
[ 1.912476] ohci-platform: OHCI generic platform driver
[ 1.912483] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.912664] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.912670] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.913736] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[ 1.913742] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.913897] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.913899] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.913901] usb usb3: Product: xHCI Host Controller
[ 1.913903] usb usb3: Manufacturer: Linux 4.16.2-041602-generic xhci-hcd
[ 1.913905] usb usb3: SerialNumber: 0000:00:14.0
[ 1.914016] hub 3-0:1.0: USB hub found
[ 1.914028] hub 3-0:1.0: 4 ports detected
[ 1.914580] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.914584] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.914623] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.914626] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.914627] usb usb4: Product: xHCI Host Controller
[ 1.914629] usb usb4: Manufacturer: Linux 4.16.2-041602-generic xhci-hcd
[ 1.914631] usb usb4: SerialNumber: 0000:00:14.0
[ 1.914756] hub 4-0:1.0: USB hub found
[ 1.914769] hub 4-0:1.0: 4 ports detected
[ 1.915378] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.920661] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.920668] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.920814] mousedev: PS/2 mouse device common for all mice
[ 1.921007] rtc_cmos 00:02: RTC can wake from S4
[ 1.921139] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.921170] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.921180] i2c /dev entries driver
[ 1.921241] device-mapper: uevent: version 1.0.3
[ 1.921316] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.921324] intel_pstate: Intel P-state driver initializing
[ 1.921533] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.921535] EFI Variables Facility v0.08 2004-May-17
[ 1.933957] NET: Registered protocol family 10
[ 1.937862] Segment Routing with IPv6
[ 1.937884] NET: Registered protocol family 17
[ 1.937922] Key type dns_resolver registered
[ 1.938127] RAS: Correctable Errors collector initialized.
[ 1.938156] microcode: sig=0x306a9, pf=0x10, revision=0x12
[ 1.938192] microcode: Microcode Update Driver: v2.2.
[ 1.938202] sched_clock: Marking stable (1938188369, 0)->(2238558989, -300370620)
[ 1.938355] registered taskstats version 1
[ 1.938368] Loading compiled-in X.509 certificates
[ 1.940894] Loaded X.509 cert 'Build time autogenerated kernel key: efe3adf509cf2eedd1f0c70fb3a57f43c186fd56'
[ 1.940912] zswap: loaded using pool lzo/zbud
[ 1.944380] Key type big_key registered
[ 1.944384] Key type trusted registered
[ 1.946016] Key type encrypted registered
[ 1.946019] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.946022] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.946043] evm: HMAC attrs: 0x1
[ 1.946329] Magic number: 14:685:72
[ 1.946428] rtc_cmos 00:02: setting system clock to 2018-04-15 10:05:16 UTC (1523786716)
[ 1.946476] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.946476] EDD information not available.
[ 1.949106] Freeing unused kernel memory: 2404K
[ 1.949107] Write protecting the kernel read-only data: 20480k
[ 1.949660] Freeing unused kernel memory: 2008K
[ 1.953500] Freeing unused kernel memory: 1900K
[ 1.960332] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.960333] x86/mm: Checking user space page tables
[ 1.967002] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.068650] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.111097] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.111108] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.111778] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0x00000000e8ff485e, 00:23:81:18:40:68, XID 0c900800 IRQ 27
[ 2.111781] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.118105] ahci 0000:00:1f.2: version 3.0
[ 2.118407] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[ 2.118412] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 2.121972] scsi host0: ahci
[ 2.122258] scsi host1: ahci
[ 2.128423] scsi host2: ahci
[ 2.133048] scsi host3: ahci
[ 2.133144] scsi host4: ahci
[ 2.133225] scsi host5: ahci
[ 2.133289] ata1: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16100 irq 28
[ 2.133291] ata2: DUMMY
[ 2.133292] ata3: DUMMY
[ 2.133293] ata4: DUMMY
[ 2.133294] ata5: DUMMY
[ 2.133295] ata6: DUMMY
[ 2.134386] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 2.183171] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[ 2.183172] fb: switching to inteldrmfb from EFI VGA
[ 2.183199] Console: switching to colour dummy device 80x25
[ 2.183303] [drm] Replacing VGA console driver
[ 2.183897] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.183898] [drm] Driver supports precise vblank timestamp query.
[ 2.184720] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.189505] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
[ 2.190446] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.220155] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 2.228062] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.233367] fbcon: inteldrmfb (fb0) is primary device
[ 2.248027] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.248039] usb 3-3: new low-speed USB device number 2 using xhci_hcd
[ 2.336039] tsc: Refined TSC clocksource calibration: 1795.919 MHz
[ 2.336057] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e31a4ce6b, max_idle_ns: 440795217410 ns
[ 2.336093] clocksource: Switched to clocksource tsc
[ 2.384792] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.384793] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.385174] hub 1-1:1.0: USB hub found
[ 2.385393] hub 1-1:1.0: 6 ports detected
[ 2.400387] usb 3-3: New USB device found, idVendor=15ca, idProduct=00c3
[ 2.400389] usb 3-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.400390] usb 3-3: Product: USB Optical Mouse
[ 2.404014] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.404310] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.404313] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.404468] hub 2-1:1.0: USB hub found
[ 2.404556] hub 2-1:1.0: 8 ports detected
[ 2.408400] usbcore: registered new interface driver usbhid
[ 2.408400] usbhid: USB HID core driver
[ 2.409763] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:15CA:00C3.0001/input/input8
[ 2.409847] hid-generic 0003:15CA:00C3.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-3/input0
[ 2.446633] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.447260] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.447262] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.447264] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.447708] ata1.00: ATA-9: TOSHIBA THNSNJ128GMCU, JUT10101, max UDMA/100
[ 2.447721] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.448819] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.448821] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.448823] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.449454] ata1.00: configured for UDMA/100
[ 2.449791] scsi 0:0:0:0: Direct-Access ATA TOSHIBA THNSNJ12 0101 PQ: 0 ANSI: 5
[ 2.449985] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 2.449988] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.449998] sd 0:0:0:0: [sda] Write Protect is off
[ 2.450000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.450018] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.451179] sda: sda1 sda2 sda3 sda4
[ 2.451444] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.672089] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 2.785215] usb 1-1.1: New USB device found, idVendor=8087, idProduct=07da
[ 2.785217] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.967287] Console: switching to colour frame buffer device 170x48
[ 2.986418] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.070500] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.176027] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 3.196126] systemd[1]: Detected architecture x86-64.
[ 3.196363] systemd[1]: Set hostname to <joker>.
[ 3.255627] systemd[1]: Created slice User and Session Slice.
[ 3.255818] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.255893] systemd[1]: Listening on Journal Audit Socket.
[ 3.255904] systemd[1]: Reached target Remote File Systems (Pre).
[ 3.255912] systemd[1]: Reached target Remote File Systems.
[ 3.255957] systemd[1]: Listening on Journal Socket.
[ 3.256000] systemd[1]: Listening on udev Control Socket.
[ 3.276854] lp: driver loaded but no devices found
[ 3.280740] ppdev: user-space parallel port driver
[ 3.335662] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 3.345030] systemd-journald[266]: Received request to flush runtime journal from PID 1
[ 3.684462] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.685631] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20180105/utaddress-247)
[ 3.685640] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.685643] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180105/utaddress-247)
[ 3.685649] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.685650] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180105/utaddress-247)
[ 3.685656] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.685657] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180105/utaddress-247)
[ 3.685662] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.685662] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.704922] Bluetooth: Core ver 2.22
[ 3.704941] NET: Registered protocol family 31
[ 3.704942] Bluetooth: HCI device and connection manager initialized
[ 3.704945] Bluetooth: HCI socket layer initialized
[ 3.704948] Bluetooth: L2CAP socket layer initialized
[ 3.704954] Bluetooth: SCO socket layer initialized
[ 3.718966] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.721476] usbcore: registered new interface driver btusb
[ 3.756982] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 3.756984] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 3.756985] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 3.756986] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 3.760182] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.762757] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 3.762761] cfg80211: failed to load regulatory.db
[ 3.785569] cryptd: max_cpu_qlen set to 1000
[ 3.785575] Intel(R) Wireless WiFi driver for Linux
[ 3.785576] Copyright(c) 2003- 2015 Intel Corporation
[ 3.785676] iwlwifi 0000:01:00.0: enabling device (0100 -> 0102)
[ 3.785861] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.830339] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 3.861218] AVX version of gcm_enc/dec engaged.
[ 3.861220] AES CTR mode by8 optimization enabled
[ 3.890177] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 3.890180] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 3.890182] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 3.890184] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[ 3.936711] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 3.961882] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 3.962160] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 4.008443] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
[ 4.019901] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 4.019905] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.019908] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 4.019910] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.019911] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.019914] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 4.019916] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 4.029685] intel_rapl: Found RAPL domain package
[ 4.029687] intel_rapl: Found RAPL domain core
[ 4.029688] intel_rapl: Found RAPL domain uncore
[ 4.040240] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.040309] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.040364] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.112690] Adding 6290428k swap on /dev/sda4. Priority:-2 extents:1 across:6290428k SSFS
[ 4.252600] audit: type=1400 audit(1523786718.801:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=723 comm="apparmor_parser"
[ 4.252606] audit: type=1400 audit(1523786718.801:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=723 comm="apparmor_parser"
[ 4.252609] audit: type=1400 audit(1523786718.801:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=723 comm="apparmor_parser"
[ 4.252612] audit: type=1400 audit(1523786718.801:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=723 comm="apparmor_parser"
[ 4.253483] audit: type=1400 audit(1523786718.801:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=722 comm="apparmor_parser"
[ 4.253487] audit: type=1400 audit(1523786718.801:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=722 comm="apparmor_parser"
[ 4.256109] audit: type=1400 audit(1523786718.805:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=728 comm="apparmor_parser"
[ 4.256954] audit: type=1400 audit(1523786718.805:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=727 comm="apparmor_parser"
[ 4.256958] audit: type=1400 audit(1523786718.805:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=727 comm="apparmor_parser"
[ 4.330430] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.330432] Bluetooth: BNEP filters: protocol multicast
[ 4.330437] Bluetooth: BNEP socket layer initialized
[ 4.512557] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 4.526524] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0
[ 4.813529] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0
[ 4.876257] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 4.880575] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 4.990185] r8169 0000:02:00.0 enp2s0: link down
[ 4.990265] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 5.062269] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 6.000624] wlp1s0: authenticate with 7a:5b:2a:2d:c6:5c
[ 6.002136] wlp1s0: send auth to 7a:5b:2a:2d:c6:5c (try 1/3)
[ 6.004508] wlp1s0: authenticated
[ 6.004899] iwlwifi 0000:01:00.0 wlp1s0: disabling HT as WMM/QoS is not supported by the AP
[ 6.004902] iwlwifi 0000:01:00.0 wlp1s0: disabling VHT as WMM/QoS is not supported by the AP
[ 6.004905] wlp1s0: waiting for beacon from 7a:5b:2a:2d:c6:5c
[ 6.056017] wlp1s0: associate with 7a:5b:2a:2d:c6:5c (try 1/3)
[ 6.060892] wlp1s0: RX AssocResp from 7a:5b:2a:2d:c6:5c (capab=0x411 status=0 aid=2)
[ 6.063260] wlp1s0: associated
[ 7.777370] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 8.202261] Bluetooth: RFCOMM TTY layer initialized
[ 8.202267] Bluetooth: RFCOMM socket layer initialized
[ 8.202273] Bluetooth: RFCOMM ver 1.11
[ 31.553086] random: crng init done
Enfin :
sudo modprobe -r psmouse ; sudo modprobe psmouse
N'a rien fait.
Je n'ai pas tout suivi là... C'est quoi le but des opérations ? et de la dernière en particulier ?
