Ce site est optimisé pour être consulté depuis un navigateur moderne dans lequel JavaScript est activé.

Non-detection de telephone Dallas ( ou medaitek flash disk )

swenrage

Bonjour tout le monde !

Cela fait un petit moment que je cherche une solution à mon problème de téléphone.

Ce n'est pas un smartphone , c'est un vieux portable de récup de la marque Dallas, ZTE-G R250. Avec comme fonction le lecteur de carte sd (mini) .

Il tourne automatiquement sur un windows, m'affiche les fichier (divisé en deux lecteur différents), et peut-être même sur un linux Kubuntu que j'avais avant. Mais depuis plusieurs semaine il n'est pas "detecté" sur mon ubuntu 16.04 LTS.

Lorsque je lance lsusb je peux le trouver sous "Mediatek Inc." sans rien de plus indiqué.

seido_@Bronze:~$ lsusb
Bus 001 Device 004: ID 174c:1153 ASMedia Technology Inc. ASM2115 SATA 6Gb/s bridge
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 005: ID 0e8d:0002 MediaTek Inc. 
Bus 002 Device 003: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 002 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Lorsque je lance fdisk -l rien n'y fait, il est absent (en plus il est lent à me sortir le résultat)

seido_@Bronze:~$ sudo fdisk -l
Disk /dev/sda: 14,3 GiB, 15367790592 bytes, 30015216 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x88d770a4

Device     Boot    Start      End  Sectors  Size Id Type
/dev/sda1  *        2048 23724031 23721984 11,3G 83 Linux
/dev/sda2       23726078 30013439  6287362    3G  5 Extended
/dev/sda5       23726080 30013439  6287360    3G 82 Linux swap / Solaris

De plus lorsque j'ouvre Gparted il n'est visible nul part, même avec "refresh devices"

J'ai trouvé ceci sur internet qui devrai à priori m'aider, j'ai effectué ce qu'il à dit (je suis pas non plus un flĉhe avec la commande cat pour écrire sur le fichier mais bon...) sans succès.

Lorsque j'ouvre le fichier /var/log/kern.log je peux le retrouver même si cela ne m'avance pas trop.
(j'obtiens pas mal de ligne j'espère ne pas trop en mettre ):

Apr 10 12:30:30 Bronze kernel: [ 5882.601070] perf interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Apr 10 12:53:07 Bronze kernel: [ 7239.604061] usb 2-6: new full-speed USB device number 4 using ohci-pci
Apr 10 12:53:07 Bronze kernel: [ 7239.819350] usb 2-6: New USB device found, idVendor=0e8d, idProduct=0002
Apr 10 12:53:07 Bronze kernel: [ 7239.819364] usb 2-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
Apr 10 12:53:07 Bronze kernel: [ 7239.819371] usb 2-6: Product: MT6225 
Apr 10 12:53:07 Bronze kernel: [ 7239.819377] usb 2-6: Manufacturer: MediaTek Inc
Apr 10 12:53:07 Bronze kernel: [ 7239.819382] usb 2-6: SerialNumber: 68205310743160f
Apr 10 12:53:07 Bronze kernel: [ 7239.827504] usb-storage 2-6:1.0: USB Mass Storage device detected
Apr 10 12:53:07 Bronze kernel: [ 7239.828644] scsi host7: usb-storage 2-6:1.0
Apr 10 12:53:08 Bronze kernel: [ 7240.836462] scsi 7:0:0:0: Direct-Access     MEDIATEK  FLASH DISK      6225 PQ: 0 ANSI: 0 CCS
Apr 10 12:53:08 Bronze kernel: [ 7240.843436] scsi 7:0:0:1: Direct-Access     MEDIATEK  FLASH DISK      6225 PQ: 0 ANSI: 0 CCS
Apr 10 12:53:08 Bronze kernel: [ 7240.846232] sd 7:0:0:0: Attached scsi generic sg3 type 0
Apr 10 12:53:08 Bronze kernel: [ 7240.849902] sd 7:0:0:1: Attached scsi generic sg4 type 0
Apr 10 12:53:08 Bronze kernel: [ 7240.855056] sd 7:0:0:0: [sdc] 31275008 512-byte logical blocks: (16.0 GB/14.9 GiB)
Apr 10 12:53:08 Bronze kernel: [ 7240.866021] sd 7:0:0:0: [sdc] Write Protect is off
Apr 10 12:53:08 Bronze kernel: [ 7240.866033] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00
Apr 10 12:53:08 Bronze kernel: [ 7240.872411] sd 7:0:0:1: [sdd] 2900 512-byte logical blocks: (1.48 MB/1.42 MiB)
Apr 10 12:53:08 Bronze kernel: [ 7240.879423] sd 7:0:0:0: [sdc] No Caching mode page found
Apr 10 12:53:08 Bronze kernel: [ 7240.879434] sd 7:0:0:0: [sdc] Assuming drive cache: write through
Apr 10 12:53:08 Bronze kernel: [ 7240.886426] sd 7:0:0:1: [sdd] Write Protect is off
Apr 10 12:53:08 Bronze kernel: [ 7240.886436] sd 7:0:0:1: [sdd] Mode Sense: 03 00 00 00
Apr 10 12:53:08 Bronze kernel: [ 7240.897530] sd 7:0:0:1: [sdd] No Caching mode page found
Apr 10 12:53:08 Bronze kernel: [ 7240.897541] sd 7:0:0:1: [sdd] Assuming drive cache: write through
Apr 10 12:53:08 Bronze kernel: [ 7240.969415]  sdc: sdc1
Apr 10 12:53:08 Bronze kernel: [ 7241.001393]  sdd:
Apr 10 12:53:08 Bronze kernel: [ 7241.030418] sd 7:0:0:0: [sdc] Attached SCSI removable disk
Apr 10 12:53:09 Bronze kernel: [ 7241.063438] sd 7:0:0:1: [sdd] Attached SCSI removable disk
Apr 10 12:53:11 Bronze kernel: [ 7243.201917] usbcore: registered new interface driver usbserial
Apr 10 12:53:11 Bronze kernel: [ 7243.201945] usbcore: registered new interface driver usbserial_generic
Apr 10 12:53:11 Bronze kernel: [ 7243.201969] usbserial: USB Serial support registered for generic
Apr 10 12:53:11 Bronze kernel: [ 7243.241839] usbcore: registered new interface driver option
Apr 10 12:53:11 Bronze kernel: [ 7243.241875] usbserial: USB Serial support registered for GSM modem (1-port)

ma version ubuntu :

seido_@Bronze:~$ uname -a
Linux Bronze 4.4.0-119-generic #143-Ubuntu SMP Mon Apr 2 16:08:24 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

Voilà pour le problème. J'ai cherché, mais peut-être pas assez, et si je ne suis pas au bon endroit n'hésitez pas à me le faire savoir.

Bonne journuit à vous !

S-r

??

Bonjour
Que donnent les deux commandes suivantes

sudo mount -v  /dev/sdc1 /mnt

ls -ls /mnt

xubu1957

Bonjour,

Cette discussion > [SOLVED] does not recognize any pendrive

Un bug > bugs.launchpad.net/ubuntu/+source/linux/+bug/1171638

#12 a écritChanging the line in /etc/usb_modeswitch.conf to

DisableSwitching=0

DisableSwitching=1

solved the problem

swenrage

Salut, alors j'essaie dans l'ordre et vais voir cet autre topic de xubu1957

sudo mount -v /dev/sdc1 /mnt donne

seido_@Bronze:~$ sudo mount -v /dev/sdc1 /mnt
[sudo] password for seido_: 
mount: special device /dev/sdc1 does not exist
seido_@Bronze:~$ sudo mount -v /dev/sdb /mnt
mount: special device /dev/sdb does not exist
seido_@Bronze:~$ sudo mount -v /dev/sdb1 /mnt
mount: special device /dev/sdb1 does not exist

ls -ls /mnt donne

seido_@Bronze:~$ ls -ls /mnt
total 0

Ais-je bien fait ?

??

swenrage a écritBonjour tout le monde !

Lorsque j'ouvre le fichier /var/log/kern.log je peux le retrouver même si cela ne m'avance pas trop.
(j'obtiens pas mal de ligne j'espère ne pas trop en mettre ):

Apr 10 12:53:07 Bronze kernel: [ 7239.604061] usb 2-6: new full-speed USB device number 4 using ohci-pci
Apr 10 12:53:07 Bronze kernel: [ 7239.819350] usb 2-6: New USB device found, idVendor=0e8d, idProduct=0002
Apr 10 12:53:07 Bronze kernel: [ 7239.819364] usb 2-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
Apr 10 12:53:07 Bronze kernel: [ 7239.819371] usb 2-6: Product: MT6225 
Apr 10 12:53:07 Bronze kernel: [ 7239.819377] usb 2-6: Manufacturer: MediaTek Inc
Apr 10 12:53:07 Bronze kernel: [ 7239.819382] usb 2-6: SerialNumber: 68205310743160f
Apr 10 12:53:07 Bronze kernel: [ 7239.827504] usb-storage 2-6:1.0: USB Mass Storage device detected
Apr 10 12:53:07 Bronze kernel: [ 7239.828644] scsi host7: usb-storage 2-6:1.0
Apr 10 12:53:08 Bronze kernel: [ 7240.836462] scsi 7:0:0:0: Direct-Access     MEDIATEK  FLASH DISK      6225 PQ: 0 ANSI: 0 CCS
Apr 10 12:53:08 Bronze kernel: [ 7240.846232] sd 7:0:0:0: Attached scsi generic sg3 type 0
Apr 10 12:53:08 Bronze kernel: [ 7240.855056] sd 7:0:0:0: [sdc] 31275008 512-byte logical blocks: (16.0 GB/14.9 GiB)
Apr 10 12:53:08 Bronze kernel: [ 7240.866021] sd 7:0:0:0: [sdc] Write Protect is off
Apr 10 12:53:08 Bronze kernel: [ 7240.866033] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00
Apr 10 12:53:08 Bronze kernel: [ 7240.879423] sd 7:0:0:0: [sdc] No Caching mode page found
Apr 10 12:53:08 Bronze kernel: [ 7240.879434] sd 7:0:0:0: [sdc] Assuming drive cache: write through
Apr 10 12:53:08 Bronze kernel: [ 7240.969415]  sdc: sdc1

......

C'est pour cela que je demandais le montage de sdc1

Bizarre. Mais peut-être as-tu débranché dans l'intervalle.

Peux-tu rebrancher, attendre 40 secondes et donner le retour de la commande

dmesg | tail -60

swenrage

Hello ; je suis en recherche de travail, désolé pour les délais ;

Donc, voici la sortie de la commande. Sachant que lorsque je branche le téléphone il me demande choisir si je le met en tant que stockage de masse ou non. Je tiens à préciser que, non, je ne l'ai pas débranché dans les message d'avant. Cela-ce voit-il ici ?

Pour xubu1957 : J'ai lu le post que tu m'a proposé, si je ne m'y intéresse pas maintenant c'est par volonté d'explorer 🙂 En espérant ne pas trop déroger à la règle.

seido_@Bronze:~$ dmesg | tail -60
[   30.748867] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
[   30.748951] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
[   30.749026] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
[   38.052799] Adding 3143676k swap on /dev/sda5.  Priority:-1 extents:1 across:3143676k FS
[   46.280105] audit: type=1400 audit(1523436392.052:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=637 comm="apparmor_parser"
[   46.280119] audit: type=1400 audit(1523436392.052:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=637 comm="apparmor_parser"
[   46.280126] audit: type=1400 audit(1523436392.052:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=637 comm="apparmor_parser"
[   46.280133] audit: type=1400 audit(1523436392.052:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=637 comm="apparmor_parser"
[   49.457013] audit: type=1400 audit(1523436395.228:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=636 comm="apparmor_parser"
[   49.457029] audit: type=1400 audit(1523436395.228:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=636 comm="apparmor_parser"
[   49.529357] audit: type=1400 audit(1523436395.300:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=640 comm="apparmor_parser"
[   52.915889] audit: type=1400 audit(1523436398.684:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=638 comm="apparmor_parser"
[   52.915905] audit: type=1400 audit(1523436398.684:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=638 comm="apparmor_parser"
[   52.915912] audit: type=1400 audit(1523436398.684:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=638 comm="apparmor_parser"
[   52.915918] audit: type=1400 audit(1523436398.684:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=638 comm="apparmor_parser"
[   52.915925] audit: type=1400 audit(1523436398.684:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=638 comm="apparmor_parser"
[   52.915931] audit: type=1400 audit(1523436398.684:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=638 comm="apparmor_parser"
[   52.974701] audit: type=1400 audit(1523436398.744:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=641 comm="apparmor_parser"
[   52.974717] audit: type=1400 audit(1523436398.744:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=641 comm="apparmor_parser"
[   52.977340] audit: type=1400 audit(1523436398.748:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=644 comm="apparmor_parser"
[   52.981590] audit: type=1400 audit(1523436398.752:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=645 comm="apparmor_parser"
[   62.471584] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready
[   62.472237] forcedeth 0000:00:07.0 enp0s7: MSI enabled
[  112.734885] ISO 9660 Extensions: Microsoft Joliet Level 3
[  112.976866] ISO 9660 Extensions: RRIP_1991A
[ 5092.340073] usb 2-5: new full-speed USB device number 4 using ohci-pci
[ 5092.555956] usb 2-5: New USB device found, idVendor=0e8d, idProduct=0002
[ 5092.555969] usb 2-5: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 5092.555976] usb 2-5: Product: MT6225 
[ 5092.555983] usb 2-5: Manufacturer: MediaTek Inc
[ 5092.555988] usb 2-5: SerialNumber: 68205310743160f
[ 5092.709427] usb-storage 2-5:1.0: USB Mass Storage device detected
[ 5092.709624] scsi host6: usb-storage 2-5:1.0
[ 5092.709775] usbcore: registered new interface driver usb-storage
[ 5092.758845] usbcore: registered new interface driver uas
[ 5093.717009] scsi 6:0:0:0: Direct-Access     MEDIATEK  FLASH DISK      6225 PQ: 0 ANSI: 0 CCS
[ 5093.723979] scsi 6:0:0:1: Direct-Access     MEDIATEK  FLASH DISK      6225 PQ: 0 ANSI: 0 CCS
[ 5093.724766] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 5093.725943] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 5093.741042] sd 6:0:0:0: [sdb] 31275008 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 5093.748090] sd 6:0:0:1: [sdc] 2900 512-byte logical blocks: (1.48 MB/1.42 MiB)
[ 5093.755028] sd 6:0:0:0: [sdb] Write Protect is off
[ 5093.755038] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 5093.762008] sd 6:0:0:1: [sdc] Write Protect is off
[ 5093.762019] sd 6:0:0:1: [sdc] Mode Sense: 03 00 00 00
[ 5093.768994] sd 6:0:0:0: [sdb] No Caching mode page found
[ 5093.769003] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 5093.776082] sd 6:0:0:1: [sdc] No Caching mode page found
[ 5093.776093] sd 6:0:0:1: [sdc] Assuming drive cache: write through
[ 5093.837076] ldm_validate_partition_table(): Disk read failed.
[ 5093.837104] Dev sdb: unable to read RDB block 0
[ 5093.837136]  sdb: unable to read partition table
[ 5093.870011]  sdc:
[ 5093.899058] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 5093.928064] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 5096.058700] usbcore: registered new interface driver usbserial
[ 5096.058723] usbcore: registered new interface driver usbserial_generic
[ 5096.058741] usbserial: USB Serial support registered for generic
[ 5096.102709] usbcore: registered new interface driver option
[ 5096.102776] usbserial: USB Serial support registered for GSM modem (1-port)
seido_@Bronze:~$

??

Bonjour

Ici, on a un message totalement différant

[ 5093.741042] sd 6:0:0:0: [sdb] 31275008 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 5093.748090] sd 6:0:0:1: [sdc] 2900 512-byte logical blocks: (1.48 MB/1.42 MiB)
...
[ 5093.837104] Dev sdb: unable to read RDB block 0
[ 5093.837136] sdb: unable to read partition table
Donc impossible de lire quoi que ce soit.

swenrage

Bonjour,

vu que mon support n'en fait qu'à sa tête je suis allé voir du côté de ce que donnais xubu1957 :

seido_@Bronze:~$ sudo gedit /etc/usb_modeswitch.conf
[sudo] password for seido_: 

(gedit:4195): Gtk-WARNING **: Calling Inhibit failed: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files

** (gedit:4195): WARNING **: Set document metadata failed: Setting attribute metadata::gedit-spell-enabled not supported

** (gedit:4195): WARNING **: Set document metadata failed: Setting attribute metadata::gedit-encoding not supported

** (gedit:4195): WARNING **: Set document metadata failed: Setting attribute metadata::gedit-position not supported

Comme stipulé sur le site , j'ai changé les ligne

EnableLogging=0 et DisableSwitching=0 avec la valeur 1

Ca fonctionne !

j'ai donc reitéré.

seido_@Bronze:~$ dmesg | tail -60
[  204.872181] usb 2-6: New USB device found, idVendor=0e8d, idProduct=0002
[  204.872195] usb 2-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[  204.872202] usb 2-6: Product: MT6225 
[  204.872208] usb 2-6: Manufacturer: MediaTek Inc
[  204.872213] usb 2-6: SerialNumber: 68205310743160f
[  204.878305] usb-storage 2-6:1.0: USB Mass Storage device detected
[  204.878759] scsi host7: usb-storage 2-6:1.0
[  205.884228] scsi 7:0:0:0: Direct-Access     MEDIATEK  FLASH DISK      6225 PQ: 0 ANSI: 0 CCS
[  205.891248] scsi 7:0:0:1: Direct-Access     MEDIATEK  FLASH DISK      6225 PQ: 0 ANSI: 0 CCS
[  205.891896] sd 7:0:0:0: Attached scsi generic sg2 type 0
[  205.894934] sd 7:0:0:1: Attached scsi generic sg3 type 0
[  205.907261] sd 7:0:0:0: [sdb] 31275008 512-byte logical blocks: (16.0 GB/14.9 GiB)
[  205.914772] sd 7:0:0:1: [sdc] 2900 512-byte logical blocks: (1.48 MB/1.42 MiB)
[  205.922121] sd 7:0:0:0: [sdb] Write Protect is off
[  205.922132] sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00
[  205.928315] sd 7:0:0:1: [sdc] Write Protect is off
[  205.928326] sd 7:0:0:1: [sdc] Mode Sense: 03 00 00 00
[  205.935224] sd 7:0:0:0: [sdb] No Caching mode page found
[  205.935235] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[  205.942225] sd 7:0:0:1: [sdc] No Caching mode page found
[  205.942235] sd 7:0:0:1: [sdc] Assuming drive cache: write through
[  206.001596] ldm_validate_partition_table(): Disk read failed.
[  206.001623] Dev sdb: unable to read RDB block 0
[  206.001654]  sdb: unable to read partition table
[  206.034233]  sdc:
[  206.063203] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[  206.092211] sd 7:0:0:1: [sdc] Attached SCSI removable disk
[ 1096.213243] usb 2-6: USB disconnect, device number 5
[ 5183.063328] perf interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 9604.080480] blk_update_request: I/O error, dev fd0, sector 0
[ 9604.080490] floppy: error -5 while reading block 0
[ 9616.256764] blk_update_request: I/O error, dev fd0, sector 0
[ 9616.256773] floppy: error -5 while reading block 0
[ 9661.888067] usb 2-6: new full-speed USB device number 6 using ohci-pci
[ 9662.103757] usb 2-6: New USB device found, idVendor=0e8d, idProduct=0002
[ 9662.103770] usb 2-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 9662.103777] usb 2-6: Product: MT6225 
[ 9662.103783] usb 2-6: Manufacturer: MediaTek Inc
[ 9662.103789] usb 2-6: SerialNumber: 68205310743160f
[ 9662.109874] usb-storage 2-6:1.0: USB Mass Storage device detected
[ 9662.110151] scsi host8: usb-storage 2-6:1.0
[ 9663.116832] scsi 8:0:0:0: Direct-Access     MEDIATEK  FLASH DISK      6225 PQ: 0 ANSI: 0 CCS
[ 9663.123802] scsi 8:0:0:1: Direct-Access     MEDIATEK  FLASH DISK      6225 PQ: 0 ANSI: 0 CCS
[ 9663.124995] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 9663.125791] sd 8:0:0:1: Attached scsi generic sg3 type 0
[ 9663.138796] sd 8:0:0:0: [sdb] 31275008 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 9663.148838] sd 8:0:0:1: [sdc] 2900 512-byte logical blocks: (1.48 MB/1.42 MiB)
[ 9663.156850] sd 8:0:0:0: [sdb] Write Protect is off
[ 9663.156861] sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 9663.165200] sd 8:0:0:1: [sdc] Write Protect is off
[ 9663.165211] sd 8:0:0:1: [sdc] Mode Sense: 03 00 00 00
[ 9663.170842] sd 8:0:0:0: [sdb] No Caching mode page found
[ 9663.170853] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 9663.178423] sd 8:0:0:1: [sdc] No Caching mode page found
[ 9663.178434] sd 8:0:0:1: [sdc] Assuming drive cache: write through
[ 9663.256815]  sdb: sdb1
[ 9663.278812]  sdc:
[ 9663.350808] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 9663.376805] sd 8:0:0:1: [sdc] Attached SCSI removable disk
[ 9668.621926] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
seido_@Bronze:~$

Cependant je crois que les changements s'appliquent à toutes les entrées usb, à faire suivre si on veut que ce soit spécifique à un produit en particulier.

Je suis désolé d'avoir fait perdre de ton temps, je vais de ce pas mettre le post en résolu.

Merci beaucoup !!

LeJediGris

Salut,

Et en cadeau: Ne JAMAIS utiliser sudo pour lancer une appli graphique, c'est gksudo qu'il faut !!

A+

??

Vous êtes tous pénibles avec votre gk......
Ce produit n'est pas installé et gedit est standard y compris en 18.04

swenrage

Yo ,

j'ai mis le post en résolu.

Et en effet j'ai voulu utiliser gksudo, mais celui-ci n'était pas trouvable apvec l'apt...