Voici les retours demandés :
[ 0.000000] Memory: 2033728K/2096248K available (6628K kernel code, 647K rwdata, 2788K rodata, 888K init, 924K bss, 62520K reserved, 1183240K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc19d6000 - 0xc1ab4000 ( 888 kB)
[ 0.000000] .data : 0xc167945c - 0xc19d5f80 (3442 kB)
[ 0.000000] .text : 0xc1000000 - 0xc167945c (6629 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f4008000 soft=f400a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3000.251 MHz processor
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.50 BogoMIPS (lpj=12001004)
[ 0.004005] pid_max: default: 32768 minimum: 301
[ 0.004029] Security Framework initialized
[ 0.004048] AppArmor: AppArmor initialized
[ 0.004049] Yama: becoming mindful.
[ 0.004091] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004093] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004291] Initializing cgroup subsys memory
[ 0.004298] Initializing cgroup subsys devices
[ 0.004300] Initializing cgroup subsys freezer
[ 0.004302] Initializing cgroup subsys blkio
[ 0.004304] Initializing cgroup subsys perf_event
[ 0.004307] Initializing cgroup subsys hugetlb
[ 0.004331] CPU: Physical Processor ID: 0
[ 0.004332] CPU: Processor Core ID: 0
[ 0.004333] FEATURE SPEC_CTRL Not Present
[ 0.004336] mce: CPU supports 6 MCE banks
[ 0.004343] CPU0: Thermal monitoring enabled (TM2)
[ 0.004346] process: using mwait in idle threads
[ 0.004354] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.004354] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.004358] Spectre V2 mitigation: Mitigation: Full generic retpoline
[ 0.004359] Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported
[ 0.004360] Speculative Store Bypass: Vulnerable
[ 0.004651] Freeing SMP alternatives memory: 32K (c1ab4000 - c1abc000)
[ 0.008246] ACPI: Core revision 20131115
[ 0.011144] ACPI: All ACPI Tables successfully acquired
[ 0.012005] ftrace: allocating 27993 entries in 55 pages
[ 0.028056] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028401] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.069764] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (fam: 06, model: 17, stepping: 06)
[ 0.072000] APIC calibration not consistent with PM-Timer: 155ms instead of 100ms
[ 0.072000] APIC delta adjusted to PM-Timer: 2083293 (3249896)
[ 0.072000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.072000] ... version: 2
[ 0.072000] ... bit width: 40
[ 0.072000] ... generic registers: 2
[ 0.072000] ... value mask: 000000ffffffffff
[ 0.072000] ... max period: 000000007fffffff
[ 0.072000] ... fixed-purpose events: 3
[ 0.072000] ... event mask: 0000000700000003
[ 0.072000] CPU 1 irqstacks, hard=f4100000 soft=f4102000
[ 0.072000] x86: Booting SMP configuration:
[ 0.008000] CPU1 microcode updated early to revision 0x60f, date = 2010-09-29
[ 0.008000] Initializing CPU#1
[ 0.072000] .... node #0, CPUs: #1
[ 0.086358] x86: Booted up 1 node, 2 CPUs
[ 0.086363] smpboot: Total of 2 processors activated (12001.00 BogoMIPS)
[ 0.086453] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.088141] devtmpfs: initialized
[ 0.088195] EVM: security.selinux
[ 0.088197] EVM: security.SMACK64
[ 0.088198] EVM: security.ima
[ 0.088199] EVM: security.capability
[ 0.088280] PM: Registering ACPI NVS region [mem 0x7ff8e000-0x7ffdffff] (335872 bytes)
[ 0.088346] pinctrl core: initialized pinctrl subsystem
[ 0.088346] regulator-dummy: no parameters
[ 0.088346] RTC time: 22:15:37, date: 06/03/18
[ 0.088346] NET: Registered protocol family 16
[ 0.088466] EISA bus registered
[ 0.088468] cpuidle: using governor ladder
[ 0.088469] cpuidle: using governor menu
[ 0.088537] ACPI: bus type PCI registered
[ 0.088539] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.088598] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.088600] PCI: not using MMCONFIG
[ 0.088688] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.088737] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.088739] PCI: Using configuration type 1 for base access
[ 0.088847] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.088848] mtrr: probably your BIOS does not setup all CPUs.
[ 0.088850] mtrr: corrected configuration.
[ 0.092060] bio: create slab <bio-0> at 0
[ 0.092087] ACPI: Added _OSI(Module Device)
[ 0.092089] ACPI: Added _OSI(Processor Device)
[ 0.092090] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.092092] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.094023] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.096204] ACPI: SSDT 7ff8e0d0 0001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.096439] ACPI: Dynamic OEM Table Load:
[ 0.096441] ACPI: SSDT (null) 0001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.096604] ACPI: SSDT 7ff8e2b0 000143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.096837] ACPI: Dynamic OEM Table Load:
[ 0.096840] ACPI: SSDT (null) 000143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.096977] ACPI: Interpreter enabled
[ 0.096993] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.097004] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.097006] ACPI: Using IOAPIC for interrupt routing
[ 0.097024] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.097452] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.097454] PCI: Using MMCONFIG for extended config space
[ 0.097466] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.097571] ACPI: No dock devices found.
[ 0.104863] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.104868] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.104873] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.104960] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.104963] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.104965] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.104967] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.104969] acpi PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
[ 0.104971] PCI: root bus 00: using default resources
[ 0.105127] PCI host bridge to bus 0000:00
[ 0.105130] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.105133] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.105135] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.105143] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.105229] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.105261] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.105302] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.105351] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.105387] pci 0000:00:1a.0: reg 0x20: [io 0xa800-0xa81f]
[ 0.105468] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.105501] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.105537] pci 0000:00:1a.1: reg 0x20: [io 0xa880-0xa89f]
[ 0.105617] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.105649] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.105686] pci 0000:00:1a.2: reg 0x20: [io 0xac00-0xac1f]
[ 0.105765] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.105804] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.105822] pci 0000:00:1a.7: reg 0x10: [mem 0xf9fffc00-0xf9ffffff]
[ 0.105900] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.105945] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.105980] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.105994] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
[ 0.106050] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.106120] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.106178] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.106223] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.106256] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 0.106313] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.106358] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.106390] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.106449] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.106495] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.106528] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.106565] pci 0000:00:1d.0: reg 0x20: [io 0xa080-0xa09f]
[ 0.106644] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.106675] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.106711] pci 0000:00:1d.1: reg 0x20: [io 0xa400-0xa41f]
[ 0.106790] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.106823] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.106859] pci 0000:00:1d.2: reg 0x20: [io 0xa480-0xa49f]
[ 0.106939] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.106980] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.106999] pci 0000:00:1d.7: reg 0x10: [mem 0xf9fff800-0xf9fffbff]
[ 0.107076] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.107121] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.107151] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.107227] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.107261] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
[ 0.107330] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[ 0.107335] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.107339] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.107432] pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018f
[ 0.107445] pci 0000:00:1f.2: reg 0x10: [io 0x9000-0x9007]
[ 0.107452] pci 0000:00:1f.2: reg 0x14: [io 0x8c00-0x8c03]
[ 0.107459] pci 0000:00:1f.2: reg 0x18: [io 0x8880-0x8887]
[ 0.107466] pci 0000:00:1f.2: reg 0x1c: [io 0x8800-0x8803]
[ 0.107473] pci 0000:00:1f.2: reg 0x20: [io 0x8480-0x848f]
[ 0.107479] pci 0000:00:1f.2: reg 0x24: [io 0x8400-0x840f]
[ 0.107565] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.107579] pci 0000:00:1f.3: reg 0x10: [mem 0xf9fff400-0xf9fff4ff 64bit]
[ 0.107596] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.107674] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
[ 0.107687] pci 0000:00:1f.5: reg 0x10: [io 0xa000-0xa007]
[ 0.107694] pci 0000:00:1f.5: reg 0x14: [io 0x9c00-0x9c03]
[ 0.107701] pci 0000:00:1f.5: reg 0x18: [io 0x9880-0x9887]
[ 0.107708] pci 0000:00:1f.5: reg 0x1c: [io 0x9800-0x9803]
[ 0.107715] pci 0000:00:1f.5: reg 0x20: [io 0x9480-0x948f]
[ 0.107721] pci 0000:00:1f.5: reg 0x24: [io 0x9400-0x940f]
[ 0.107843] pci 0000:01:00.0: [10de:0421] type 00 class 0x030000
[ 0.107852] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.107862] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.107871] pci 0000:01:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.107878] pci 0000:01:00.0: reg 0x24: [io 0xbc00-0xbc7f]
[ 0.107885] pci 0000:01:00.0: reg 0x30: [mem 0xfe8e0000-0xfe8fffff pref]
[ 0.107949] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.107952] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.107955] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe8fffff]
[ 0.107958] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.108008] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.108016] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.108095] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[ 0.108176] pci 0000:03:00.0: reg 0x24: [mem 0xfeafe000-0xfeafffff]
[ 0.108188] pci 0000:03:00.0: reg 0x30: [mem 0xfeae0000-0xfeaeffff pref]
[ 0.108236] pci 0000:03:00.0: PME# supported from D3hot
[ 0.108291] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[ 0.108311] pci 0000:03:00.1: reg 0x10: [io 0xdc00-0xdc07]
[ 0.108320] pci 0000:03:00.1: reg 0x14: [io 0xd880-0xd883]
[ 0.108330] pci 0000:03:00.1: reg 0x18: [io 0xd800-0xd807]
[ 0.108340] pci 0000:03:00.1: reg 0x1c: [io 0xd480-0xd483]
[ 0.108349] pci 0000:03:00.1: reg 0x20: [io 0xd400-0xd40f]
[ 0.108445] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.108454] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.108457] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.108461] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.108526] pci 0000:02:00.0: [11ab:4364] type 00 class 0x020000
[ 0.108547] pci 0000:02:00.0: reg 0x10: [mem 0xfe9fc000-0xfe9fffff 64bit]
[ 0.108558] pci 0000:02:00.0: reg 0x18: [io 0xc800-0xc8ff]
[ 0.108597] pci 0000:02:00.0: reg 0x30: [mem 0xfe9c0000-0xfe9dffff pref]
[ 0.108657] pci 0000:02:00.0: supports D1 D2
[ 0.108659] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.116017] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.116022] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.116027] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.116081] pci 0000:05:01.0: [14f1:2f00] type 00 class 0x078000
[ 0.116098] pci 0000:05:01.0: reg 0x10: [mem 0xfebf0000-0xfebfffff]
[ 0.116114] pci 0000:05:01.0: reg 0x14: [io 0xec00-0xec07]
[ 0.116170] pci 0000:05:01.0: supports D1 D2
[ 0.116172] pci 0000:05:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.116213] pci 0000:05:03.0: [11c1:5811] type 00 class 0x0c0010
[ 0.116228] pci 0000:05:03.0: reg 0x10: [mem 0xfebef000-0xfebeffff]
[ 0.116292] pci 0000:05:03.0: supports D1 D2
[ 0.116294] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.116354] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.116358] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.116361] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.116366] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.116369] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.116391] pci_bus 0000:00: on NUMA node 0
[ 0.117130] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.117181] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.117232] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.117282] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.117332] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.117383] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.117434] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.117484] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.117574] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.117580] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.117614] Found 1 acpi root devices
[ 0.120014] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.120016] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.120019] vgaarb: loaded
[ 0.120020] vgaarb: bridge control possible 0000:01:00.0
[ 0.120193] SCSI subsystem initialized
[ 0.120205] libata version 3.00 loaded.
[ 0.120205] ACPI: bus type USB registered
[ 0.120205] usbcore: registered new interface driver usbfs
[ 0.120205] usbcore: registered new interface driver hub
[ 0.120205] usbcore: registered new device driver usb
[ 0.120205] PCI: Using ACPI for IRQ routing
[ 0.120205] PCI: pci_cache_line_size set to 64 bytes
[ 0.120205] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.120205] e820: reserve RAM buffer [mem 0x7ff80000-0x7fffffff]
[ 0.120205] NetLabel: Initializing
[ 0.120205] NetLabel: domain hash size = 128
[ 0.120205] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.120205] NetLabel: unlabeled traffic allowed by default
[ 0.120205] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.120205] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.120205] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.122091] Switched to clocksource hpet
[ 0.126492] AppArmor: AppArmor Filesystem Enabled
[ 0.126507] pnp: PnP ACPI init
[ 0.126518] ACPI: bus type PNP registered
[ 0.126568] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.126571] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.126604] pnp 00:01: [dma 4]
[ 0.126622] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.126654] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.126677] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.126703] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.126919] pnp 00:05: [dma 2]
[ 0.126964] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.127015] system 00:06: [io 0x0290-0x0297] has been reserved
[ 0.127018] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.127158] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.127161] system 00:07: [io 0x0800-0x087f] could not be reserved
[ 0.127163] system 00:07: [io 0x0480-0x04bf] has been reserved
[ 0.127166] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.127168] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.127171] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.127174] system 00:07: [mem 0xffa00000-0xffafffff] has been reserved
[ 0.127176] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.127179] system 00:07: [mem 0xffe00000-0xffefffff] has been reserved
[ 0.127181] system 00:07: [mem 0xfff00000-0xfffffffe] has been reserved
[ 0.127184] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.127255] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.127434] pnp 00:09: [dma 0 disabled]
[ 0.127490] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.127554] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.127557] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.127560] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.127608] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.127661] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.127664] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.128085] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.128089] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.128091] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.128094] system 00:0d: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.128096] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.128205] pnp: PnP ACPI: found 14 devices
[ 0.128206] ACPI: bus type PNP unregistered
[ 0.128209] PnPBIOS: Disabled by ACPI PNP
[ 0.164348] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.164352] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000
[ 0.164360] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.164367] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.164376] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.164379] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.164382] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.164384] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.164387] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.164391] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x803fffff]
[ 0.164394] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.164396] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
[ 0.164399] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.164402] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.164405] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.164408] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe8fffff]
[ 0.164411] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.164414] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.164417] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.164421] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x803fffff]
[ 0.164425] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.164430] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.164432] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.164437] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.164440] pci 0000:00:1c.4: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.164445] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.164448] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.164452] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.164455] pci 0000:00:1c.5: bridge window [mem 0x80600000-0x807fffff 64bit pref]
[ 0.164461] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.164463] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.164468] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.164474] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.164477] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.164479] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.164481] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe8fffff]
[ 0.164483] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.164485] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.164487] pci_bus 0000:04: resource 1 [mem 0x80000000-0x803fffff]
[ 0.164489] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.164492] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.164494] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.164496] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 0.164498] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.164500] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.164502] pci_bus 0000:02: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[ 0.164504] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.164506] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.164508] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
[ 0.164510] pci_bus 0000:05: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.164537] NET: Registered protocol family 2
[ 0.164704] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.164717] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.164735] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.164753] TCP: reno registered
[ 0.164755] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.164761] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.164806] NET: Registered protocol family 1
[ 0.165717] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.165729] PCI: CLS 32 bytes, default 64
[ 0.165767] Trying to unpack rootfs image as initramfs...
[ 0.632754] Freeing initrd memory: 28900K (f477e000 - f63b7000)
[ 0.632962] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60f
[ 0.632969] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60f
[ 0.633033] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.633035] Scanning for low memory corruption every 60 seconds
[ 0.633274] Initialise system trusted keyring
[ 0.633318] audit: initializing netlink socket (disabled)
[ 0.633331] type=2000 audit(1528064137.632:1): initialized
[ 0.651466] bounce pool size: 64 pages
[ 0.651477] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.652650] zbud: loaded
[ 0.652714] VFS: Disk quotas dquot_6.5.2
[ 0.652757] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.653168] fuse init (API version 7.22)
[ 0.653239] msgmni has been set to 1717
[ 0.653298] Key type big_key registered
[ 0.653614] Key type asymmetric registered
[ 0.653616] Asymmetric key parser 'x509' registered
[ 0.653645] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.653674] io scheduler noop registered
[ 0.653676] io scheduler deadline registered (default)
[ 0.653702] io scheduler cfq registered
[ 0.653904] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.653942] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.654009] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.654119] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.654226] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.654292] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.654306] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.654347] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[ 0.654348] vesafb: scrolling: redraw
[ 0.654350] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.657039] vesafb: framebuffer at 0xfb000000, mapped to 0xf8480000, using 4032k, total 4032k
[ 0.660481] Console: switching to colour frame buffer device 160x50
[ 0.663800] fb0: VESA VGA frame buffer device
[ 0.663823] intel_idle: does not run on family 6 model 23
[ 0.663830] ipmi message handler version 39.2
[ 0.663911] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.663915] ACPI: Power Button [PWRB]
[ 0.663954] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.663957] ACPI: Power Button [PWRF]
[ 0.664082] GHES: HEST is not enabled!
[ 0.664127] isapnp: Scanning for PnP cards...
[ 0.672043] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.692427] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.693508] Linux agpgart interface v0.103
[ 0.694797] brd: module loaded
[ 0.695407] loop: module loaded
[ 0.695509] ata_piix 0000:00:1f.2: version 2.13
[ 0.695587] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.696507] scsi0 : ata_piix
[ 0.696557] scsi1 : ata_piix
[ 0.696590] ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 22
[ 0.696594] ata2: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 22
[ 0.696661] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.697380] scsi2 : ata_piix
[ 0.697421] scsi3 : ata_piix
[ 0.697451] ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
[ 0.697454] ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
[ 0.697722] libphy: Fixed MDIO Bus: probed
[ 0.697813] tun: Universal TUN/TAP device driver, 1.6
[ 0.697814] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.697845] PPP generic driver version 2.4.2
[ 0.697876] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.697880] ehci-pci: EHCI PCI platform driver
[ 0.697962] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.697968] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.697979] ehci-pci 0000:00:1a.7: debug port 1
[ 0.701886] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.701901] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[ 0.712012] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.712055] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.712058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.712060] usb usb1: Product: EHCI Host Controller
[ 0.712062] usb usb1: Manufacturer: Linux 3.13.0-149-generic ehci_hcd
[ 0.712064] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.712144] hub 1-0:1.0: USB hub found
[ 0.712153] hub 1-0:1.0: 6 ports detected
[ 0.712347] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.712352] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.712362] ehci-pci 0000:00:1d.7: debug port 1
[ 0.716260] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.716275] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9fff800
[ 0.728011] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.728054] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.728056] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.728058] usb usb2: Product: EHCI Host Controller
[ 0.728060] usb usb2: Manufacturer: Linux 3.13.0-149-generic ehci_hcd
[ 0.728062] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.728133] hub 2-0:1.0: USB hub found
[ 0.728139] hub 2-0:1.0: 6 ports detected
[ 0.728258] ehci-platform: EHCI generic platform driver
[ 0.728265] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.728267] ohci-pci: OHCI PCI platform driver
[ 0.728277] ohci-platform: OHCI generic platform driver
[ 0.728282] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.728351] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.728355] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.728384] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[ 0.728420] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.728423] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.728425] usb usb3: Product: UHCI Host Controller
[ 0.728427] usb usb3: Manufacturer: Linux 3.13.0-149-generic uhci_hcd
[ 0.728429] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.728499] hub 3-0:1.0: USB hub found
[ 0.728505] hub 3-0:1.0: 2 ports detected
[ 0.728630] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.728634] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.728661] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[ 0.728696] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.728698] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.728700] usb usb4: Product: UHCI Host Controller
[ 0.728702] usb usb4: Manufacturer: Linux 3.13.0-149-generic uhci_hcd
[ 0.728704] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.728773] hub 4-0:1.0: USB hub found
[ 0.728779] hub 4-0:1.0: 2 ports detected
[ 0.728902] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.728907] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.728927] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
[ 0.728961] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.728964] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.728966] usb usb5: Product: UHCI Host Controller
[ 0.728968] usb usb5: Manufacturer: Linux 3.13.0-149-generic uhci_hcd
[ 0.728970] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.729040] hub 5-0:1.0: USB hub found
[ 0.729045] hub 5-0:1.0: 2 ports detected
[ 0.729170] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.729175] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.729194] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[ 0.729228] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.729231] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.729233] usb usb6: Product: UHCI Host Controller
[ 0.729235] usb usb6: Manufacturer: Linux 3.13.0-149-generic uhci_hcd
[ 0.729237] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.729306] hub 6-0:1.0: USB hub found
[ 0.729312] hub 6-0:1.0: 2 ports detected
[ 0.729437] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.729442] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.729469] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[ 0.729505] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.729507] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.729509] usb usb7: Product: UHCI Host Controller
[ 0.729511] usb usb7: Manufacturer: Linux 3.13.0-149-generic uhci_hcd
[ 0.729513] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.729583] hub 7-0:1.0: USB hub found
[ 0.729588] hub 7-0:1.0: 2 ports detected
[ 0.729711] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.729716] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.729735] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[ 0.729769] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.729772] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.729774] usb usb8: Product: UHCI Host Controller
[ 0.729776] usb usb8: Manufacturer: Linux 3.13.0-149-generic uhci_hcd
[ 0.729778] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.729850] hub 8-0:1.0: USB hub found
[ 0.729856] hub 8-0:1.0: 2 ports detected
[ 0.729984] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.729986] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.730497] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.730564] mousedev: PS/2 mouse device common for all mice
[ 0.730659] rtc_cmos 00:02: RTC can wake from S4
[ 0.730750] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.730771] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.730833] device-mapper: uevent: version 1.0.3
[ 0.730884] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.730901] platform eisa.0: Probing EISA bus 0
[ 0.730906] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.730923] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.730925] platform eisa.0: EISA: Detected 0 cards
[ 0.730931] cpufreq-nforce2: No nForce2 chipset.
[ 0.730934] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.731055] TCP: cubic registered
[ 0.731139] NET: Registered protocol family 10
[ 0.731311] NET: Registered protocol family 17
[ 0.731319] Key type dns_resolver registered
[ 0.731449] Using IPI No-Shortcut mode
[ 0.731513] Loading compiled-in X.509 certificates
[ 0.734345] Loaded X.509 cert 'Magrathea: Glacier signing key: 8d6b2e107c27dd40580b07cf47d8f598de7e5b48'
[ 0.734356] registered taskstats version 1
[ 0.736167] Key type trusted registered
[ 0.739151] Key type encrypted registered
[ 0.739154] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.739157] IMA: No TPM chip found, activating TPM-bypass!
[ 0.739430] regulator-dummy: disabling
[ 0.739465] Magic number: 6:279:299
[ 0.739522] rtc_cmos 00:02: setting system clock to 2018-06-03 22:15:38 UTC (1528064138)
[ 0.739746] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.739748] EDD information not available.
[ 0.739772] PM: Hibernation image not present or could not be loaded.
[ 0.754364] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.973524] isapnp: No Plug & Play device found
[ 1.030540] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.041070] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 1.041074] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.178447] usb 1-3: New USB device found, idVendor=0bda, idProduct=8187
[ 1.178451] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.178454] usb 1-3: Product: RTL8187_Wireless
[ 1.178457] usb 1-3: Manufacturer: Manufacturer_Realtek_RTL8187_
[ 1.178460] usb 1-3: SerialNumber: 0015AF651029
[ 1.288013] usb 2-3: new high-speed USB device number 2 using ehci-pci
[ 1.428071] usb 2-3: New USB device found, idVendor=04b8, idProduct=0885
[ 1.428075] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.428078] usb 2-3: Product: EPSON Epson Stylus SX235 Series
[ 1.428081] usb 2-3: Manufacturer: EPSON
[ 1.428083] usb 2-3: SerialNumber: 4E3841593035363040
[ 1.508061] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.508074] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.524623] ata1.00: ATA-8: WDC WD3200AAKX-00ERMA0, 15.01H15, max UDMA/133
[ 1.524627] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.524828] ata1.01: ATA-7: Hitachi HDS721616PLA380, P22OABEA, max UDMA/133
[ 1.524832] ata1.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.540632] ata1.00: configured for UDMA/133
[ 1.556300] ata1.01: configured for UDMA/133
[ 1.556423] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKX-0 15.0 PQ: 0 ANSI: 5
[ 1.556509] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.556523] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.556553] sd 0:0:0:0: [sda] Write Protect is off
[ 1.556555] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.556575] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.556616] scsi 0:0:1:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
[ 1.556738] sd 0:0:1:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.556770] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 1.568060] sd 0:0:1:0: [sdb] Write Protect is off
[ 1.568069] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.582077] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.600011] usb 2-6: new high-speed USB device number 4 using ehci-pci
[ 1.605309] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 1.613781] sdb: sdb1
[ 1.613878] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.613977] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 1.632016] tsc: Refined TSC clocksource calibration: 2999.944 MHz
[ 1.760442] usb 2-6: New USB device found, idVendor=06f8, idProduct=3005
[ 1.760446] usb 2-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 1.760449] usb 2-6: Product: Hercules Dualpix Exchange
[ 1.760452] usb 2-6: Manufacturer: Guillemot Corporation
[ 2.004014] usb 8-1: new low-speed USB device number 2 using uhci_hcd
[ 2.180766] usb 8-1: New USB device found, idVendor=046d, idProduct=c03d
[ 2.180770] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.180773] usb 8-1: Product: USB-PS/2 Optical Mouse
[ 2.180776] usb 8-1: Manufacturer: Logitech
[ 2.632053] Switched to clocksource tsc
[ 6.548009] ata2.00: link is slow to respond, please be patient (ready=0)
[ 10.748009] ata2.00: SRST failed (errno=-16)
[ 16.584009] ata2.00: link is slow to respond, please be patient (ready=0)
[ 20.784010] ata2.00: SRST failed (errno=-16)
[ 26.620009] ata2.00: link is slow to respond, please be patient (ready=0)
[ 55.796009] ata2.00: SRST failed (errno=-16)
[ 55.796014] ata2.00: limiting SATA link speed to 1.5 Gbps
[ 55.796017] ata2.01: limiting SATA link speed to 1.5 Gbps
[ 60.848010] ata2.00: SRST failed (errno=-16)
[ 60.858548] ata2.00: reset failed, giving up
[ 60.858799] Freeing unused kernel memory: 888K (c19d6000 - c1ab4000)
[ 60.858831] Write protecting the kernel text: 6632k
[ 60.858899] Write protecting the kernel read-only data: 2792k
[ 60.858900] NX-protecting the kernel data: 5656k
[ 60.869906] systemd-udevd[110]: starting version 204
[ 60.900854] [drm] Initialized drm 1.1.0 20060810
[ 60.902882] Floppy drive(s): fd0 is 1.44M
[ 60.916339] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 60.922468] wmi: Mapper loaded
[ 60.923042] sky2: driver version 1.30
[ 60.923109] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3
[ 60.923160] sky2 0000:02:00.0: irq 44 for MSI/MSI-X
[ 60.923191] scsi4 : pata_jmicron
[ 60.923855] FDC 0 is a post-1991 82077
[ 60.925393] sky2 0000:02:00.0 eth0: addr 00:1f:c6:01:1f:e3
[ 60.936493] hidraw: raw HID events driver (C) Jiri Kosina
[ 60.952527] scsi5 : pata_jmicron
[ 60.952570] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 60.952572] ata6: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 60.952718] ahci 0000:03:00.0: version 3.0
[ 60.967448] checking generic (fb000000 3f0000) vs hw (d0000000 10000000)
[ 60.967451] checking generic (fb000000 3f0000) vs hw (fa000000 2000000)
[ 60.967453] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 60.967468] Console: switching to colour dummy device 80x25
[ 60.968152] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 60.968156] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 60.971138] usbcore: registered new interface driver usbhid
[ 60.971140] usbhid: USB HID core driver
[ 60.971971] scsi6 : ahci
[ 60.976072] scsi7 : ahci
[ 60.976122] ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[ 60.976125] ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
[ 60.979578] [drm] hdmi device not found 1 0 1
[ 60.979650] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x086100a2
[ 60.979652] nouveau [ DEVICE][0000:01:00.0] Chipset: G86 (NV86)
[ 60.979654] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 60.980497] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 61.022612] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 61.022614] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 61.022697] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 61.022700] nouveau [ VBIOS][0000:01:00.0] version 60.86.59.00.00
[ 61.044130] firewire_ohci 0000:05:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 61.045151] nouveau 0000:01:00.0: irq 45 for MSI/MSI-X
[ 61.045160] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 61.045261] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
[ 61.045263] nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
[ 61.045265] nouveau [ PFB][0000:01:00.0] ZCOMP: 1292 tags
[ 61.046081] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3
[ 61.046878] hid-generic 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0
[ 61.049043] nouveau [ VOLT][0000:01:00.0] GPU voltage: 1320000uv
[ 61.071209] nouveau [ PTHERM][0000:01:00.0] FAN control: PWM
[ 61.071229] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 61.071242] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 61.071263] nouveau [ CLK][0000:01:00.0] 20: core 459 MHz shader 918 MHz memory 333 MHz
[ 61.071295] nouveau [ CLK][0000:01:00.0] --: core 459 MHz shader 918 MHz memory 399 MHz
[ 61.071391] [TTM] Zone kernel: Available graphics memory: 440154 kiB
[ 61.071393] [TTM] Zone highmem: Available graphics memory: 1031774 kiB
[ 61.071394] [TTM] Initializing pool allocator
[ 61.071398] [TTM] Initializing DMA pool allocator
[ 61.071405] nouveau [ DRM] VRAM: 1024 MiB
[ 61.071407] nouveau [ DRM] GART: 1048576 MiB
[ 61.071411] nouveau [ DRM] TMDS table version 2.0
[ 61.071414] nouveau [ DRM] DCB version 4.0
[ 61.071416] nouveau [ DRM] DCB outp 00: 02000300 00000028
[ 61.071419] nouveau [ DRM] DCB outp 01: 01000302 00020030
[ 61.071421] nouveau [ DRM] DCB outp 02: 04011310 00000028
[ 61.071423] nouveau [ DRM] DCB outp 03: 010223f1 00c0c080
[ 61.071425] nouveau [ DRM] DCB conn 00: 1030
[ 61.071427] nouveau [ DRM] DCB conn 01: 0100
[ 61.071429] nouveau [ DRM] DCB conn 02: 0210
[ 61.071430] nouveau [ DRM] DCB conn 03: 0211
[ 61.071432] nouveau [ DRM] DCB conn 04: 0213
[ 61.080114] nouveau W[ DRM] failed to create encoder 0/1/0: -19
[ 61.080116] nouveau W[ DRM] TV-1 has no encoders, removing
[ 61.080134] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 61.080136] [drm] No driver support for vblank timestamp query.
[ 61.089193] nouveau [ DRM] MM: using CRYPT for buffer copies
[ 61.116555] ata5.01: ATAPI: Pioneer DVD-ROM ATAPIModel DVD-115 0122, E1.22, max UDMA/33
[ 61.132526] ata5.01: configured for UDMA/33
[ 61.133477] nouveau [ DRM] allocated 1440x900 fb: 0x70000, bo f5e20000
[ 61.133515] fbcon: nouveaufb (fb0) is primary device
[ 61.134784] scsi 4:0:1:0: CD-ROM PIONEER DVD-ROM DVD-115 1.22 PQ: 0 ANSI: 5
[ 61.136119] sr0: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray
[ 61.136121] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 61.136332] sr 4:0:1:0: Attached scsi CD-ROM sr0
[ 61.136412] sr 4:0:1:0: Attached scsi generic sg2 type 5
[ 61.200207] Console: switching to colour frame buffer device 180x56
[ 61.201039] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 61.201041] nouveau 0000:01:00.0: registered panic notifier
[ 61.201046] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
[ 61.296028] ata8: SATA link down (SStatus 0 SControl 300)
[ 61.328030] ata7: SATA link down (SStatus 0 SControl 300)
[ 61.544112] firewire_core 0000:05:03.0: created device fw0: GUID 001e8c000110e926, S400
[ 62.469770] random: nonblocking pool is initialized
[ 62.672015] raid6: mmxx1 3830 MB/s
[ 62.740005] raid6: mmxx2 4344 MB/s
[ 62.808003] raid6: sse1x1 2634 MB/s
[ 62.876009] raid6: sse1x2 3370 MB/s
[ 62.944010] raid6: sse2x1 4809 MB/s
[ 63.012013] raid6: sse2x2 5430 MB/s
[ 63.012015] raid6: using algorithm sse2x2 (5430 MB/s)
[ 63.012016] raid6: using ssse3x1 recovery algorithm
[ 63.015520] xor: measuring software checksum speed
[ 63.052002] pIII_sse : 10663.000 MB/sec
[ 63.092002] prefetch64-sse: 12051.000 MB/sec
[ 63.092004] xor: using function: prefetch64-sse (12051.000 MB/sec)
[ 63.120310] bio: create slab <bio-1> at 1
[ 63.120668] Btrfs loaded
[ 63.436682] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 73.133421] Adding 3052312k swap on /dev/sda7. Priority:-1 extents:1 across:3052312k FS
[ 73.958298] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[ 74.148631] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 74.472436] systemd-udevd[452]: starting version 204
[ 74.610475] lp: driver loaded but no devices found
[ 74.619562] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 74.621623] ppdev: user-space parallel port driver
[ 74.824015] device-mapper: multipath: version 1.6.0 loaded
[ 74.844450] WARNING! power/level is deprecated; use power/control instead
[ 74.887624] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 75.013348] type=1400 audit(1528057012.771:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=526 comm="apparmor_parser"
[ 75.013354] type=1400 audit(1528057012.771:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=526 comm="apparmor_parser"
[ 75.013358] type=1400 audit(1528057012.771:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=526 comm="apparmor_parser"
[ 75.015972] type=1400 audit(1528057012.771:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=540 comm="apparmor_parser"
[ 75.115843] Linux video capture interface: v2.00
[ 75.133934] cfg80211: Calling CRDA to update world regulatory domain
[ 75.188359] 4:3:1: cannot get freq at ep 0x84
[ 75.196484] usb_audio: Warning! Unlikely big volume range (=3328), cval->res is probably wrong.
[ 75.196488] usb_audio: [2] FU [Mic Capture Volume] ch = 1, val = 4608/7936/1<6>[ 75.196646] usbcore: registered new interface driver snd-usb-audio
[ 75.199894] uvcvideo: Found UVC 1.00 device Hercules Dualpix Exchange (06f8:3005)
[ 75.206229] input: Hercules Dualpix Exchange as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input4
[ 75.206292] usbcore: registered new interface driver uvcvideo
[ 75.206293] USB Video Class driver (1.1.1)
[ 75.261245] autoconfig: line_outs=4 (0x12/0x16/0x24/0x25/0x0) type:line
[ 75.261248] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 75.261250] hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[ 75.261251] mono: mono_out=0x0
[ 75.261252] dig-out=0x1b/0x0
[ 75.261253] inputs:
[ 75.261255] Front Mic=0x14
[ 75.261257] Rear Mic=0x17
[ 75.261258] Line=0x15
[ 75.261259] CD=0x18
[ 75.273769] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 75.275014] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 75.276246] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 75.276309] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 75.277526] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 75.278757] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 75.279969] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 75.280051] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 75.324464] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 75.324634] ieee80211 phy0: hwaddr 00:15:af:65:10:29, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
[ 75.335617] rtl8187: Customer ID is 0x00
[ 75.336104] rtl8187: wireless switch is on
[ 75.336150] usbcore: registered new interface driver rtl8187
[ 75.518209] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 75.745104] cfg80211: World regulatory domain updated:
[ 75.745108] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 75.745110] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 75.745112] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 75.745113] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 75.745115] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 75.745117] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 76.387609] init: failsafe main process (746) killed by TERM signal
[ 76.983774] Bluetooth: Core ver 2.17
[ 76.983791] NET: Registered protocol family 31
[ 76.983792] Bluetooth: HCI device and connection manager initialized
[ 76.983799] Bluetooth: HCI socket layer initialized
[ 76.983802] Bluetooth: L2CAP socket layer initialized
[ 76.983806] Bluetooth: SCO socket layer initialized
[ 76.998292] Bluetooth: RFCOMM TTY layer initialized
[ 76.998301] Bluetooth: RFCOMM socket layer initialized
[ 76.998306] Bluetooth: RFCOMM ver 1.11
[ 77.003761] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 77.003763] Bluetooth: BNEP filters: protocol multicast
[ 77.003768] Bluetooth: BNEP socket layer initialized
[ 77.034383] type=1400 audit(1528057014.791:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=823 comm="apparmor_parser"
[ 77.034390] type=1400 audit(1528057014.791:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=823 comm="apparmor_parser"
[ 77.496910] usblp 2-3:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0885
[ 77.497116] usbcore: registered new interface driver usblp
[ 77.514278] init: cups main process (824) killed by HUP signal
[ 77.514287] init: cups main process ended, respawning
[ 77.519949] type=1400 audit(1528057015.275:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=895 comm="apparmor_parser"
[ 77.519957] type=1400 audit(1528057015.275:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=895 comm="apparmor_parser"
[ 77.519962] type=1400 audit(1528057015.275:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=895 comm="apparmor_parser"
[ 77.520891] type=1400 audit(1528057015.279:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=894 comm="apparmor_parser"
[ 78.971027] init: samba-ad-dc main process (963) terminated with status 1
[ 80.284764] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 80.290175] sky2 0000:02:00.0 eth0: enabling interface
[ 80.290560] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 80.575732] init: plymouth-upstart-bridge main process ended, respawning
[ 80.583453] init: plymouth-upstart-bridge main process (1280) terminated with status 1
[ 80.583465] init: plymouth-upstart-bridge main process ended, respawning
[ 82.084758] wlan0: authenticate with 30:7e:cb:4d:5a:bc
[ 82.281677] wlan0: send auth to 30:7e:cb:4d:5a:bc (try 1/3)
[ 82.283369] wlan0: authenticated
[ 82.284363] wlan0: associate with 30:7e:cb:4d:5a:bc (try 1/3)
[ 82.286990] wlan0: RX AssocResp from 30:7e:cb:4d:5a:bc (capab=0x411 status=0 aid=1)
[ 82.287613] wlan0: associated
[ 82.287641] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 82.566739] 4:3:1: cannot get freq at ep 0x84
[ 82.588861] 4:3:1: cannot get freq at ep 0x84
[ 82.621861] 4:3:1: cannot get freq at ep 0x84
[ 82.643985] 4:3:1: cannot get freq at ep 0x84
[ 90.788491] 4:3:1: cannot get freq at ep 0x84
[ 90.810614] 4:3:1: cannot get freq at ep 0x84
[ 93.336327] init: plymouth-stop pre-start process (2376) terminated with status 1
[ 107.098326] audit_printk_skb: 51 callbacks suppressed
[ 107.098330] type=1400 audit(1528057044.855:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2481 comm="apparmor_parser"
[ 107.098336] type=1400 audit(1528057044.855:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2481 comm="apparmor_parser"
alain @ alain-P5K-E ~/Bureau
└─ $ ▶ sudo systemd-analyse
[sudo] password for alain:
sudo: systemd-analyse: command not found
alain @ alain-P5K-E ~/Bureau
└─ $ ▶ sudo systemd-analyse blame
sudo: systemd-analyse: command not found
alain @ alain-P5K-E ~/Bureau
└─ $ ▶ sudo systemd-analyse critical-chain
sudo: systemd-analyse: command not found
alain @ alain-P5K-E ~/Bureau
└─ $ ▶
Pas de problème pour "dmesg" mais les trois commandes suivantes sont inconnues
Le "boot info" m'a donné un peu de mal car je ne connaissais pas cette procédure :/ Quoiqu'il en soit, voilà l'URL
http://paste.ubuntu.com/p/q5TZQmrwfy/
J'espère que j'ai bien recopié...Que dois-je faire pour les"systemd" qui ne marchent pas ?
