Merci de me répondre
Voici la réponse :
anthony@AR-X542UAR:~$ grep -i pstate /boot/config-$(uname -r)
CONFIG_X86_INTEL_PSTATE=y
anthony@AR-X542UAR:~$ cat /etc/init.d/cpufrequtils
#!/bin/sh
### BEGIN INIT INFO
# Provides: cpufrequtils
# Required-Start: $remote_fs loadcpufreq
# Required-Stop:
# Default-Start: 2 3 4 5
# Default-Stop:
# Short-Description: set CPUFreq kernel parameters
# Description: utilities to deal with CPUFreq Linux
# kernel support
### END INIT INFO
#
DESC="CPUFreq Utilities"
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
CPUFREQ_SET=/usr/bin/cpufreq-set
CPUFREQ_INFO=/usr/bin/cpufreq-info
CPUFREQ_OPTIONS=""
# use lsb-base
. /lib/lsb/init-functions
# Which governor to use. Must be one of the governors listed in:
# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors
#
# and which limits to set. Both MIN_SPEED and MAX_SPEED must be values
# listed in:
# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies
# a value of 0 for any of the two variables will disabling the use of
# that limit variable.
#
# WARNING: the correct kernel module must already be loaded or compiled in.
#
# Set ENABLE to "true" to let the script run at boot time.
#
# eg: ENABLE="true"
# GOVERNOR="ondemand"
# MAX_SPEED=1000
# MIN_SPEED=500
ENABLE="true"
GOVERNOR="ondemand"
MAX_SPEED="0"
MIN_SPEED="0"
check_governor_avail() {
info="/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors"
if [ -f $info ] && grep -q "\<$GOVERNOR\>" $info ; then
return 0;
fi
return 1;
}
[ -x $CPUFREQ_SET ] || exit 0
if [ -f /etc/default/cpufrequtils ] ; then
. /etc/default/cpufrequtils
fi
# if not enabled then exit gracefully
[ "$ENABLE" = "true" ] || exit 0
if [ -n "$MAX_SPEED" ] && [ $MAX_SPEED != "0" ] ; then
CPUFREQ_OPTIONS="$CPUFREQ_OPTIONS --max $MAX_SPEED"
fi
if [ -n "$MIN_SPEED" ] && [ $MIN_SPEED != "0" ] ; then
CPUFREQ_OPTIONS="$CPUFREQ_OPTIONS --min $MIN_SPEED"
fi
if [ -n "$GOVERNOR" ] ; then
CPUFREQ_OPTIONS="$CPUFREQ_OPTIONS --governor $GOVERNOR"
fi
CPUS=$(cat /proc/stat|sed -ne 's/^cpu\([[:digit:]]\+\).*/\1/p')
RETVAL=0
case "$1" in
start|force-reload|restart|reload)
log_action_begin_msg "$DESC: Setting $GOVERNOR CPUFreq governor"
if check_governor_avail ; then
for cpu in $CPUS ; do
log_action_cont_msg "CPU${cpu}"
$CPUFREQ_SET --cpu $cpu $CPUFREQ_OPTIONS 2>&1 > /dev/null || \
RETVAL=$?
done
log_action_end_msg $RETVAL ""
else
log_action_cont_msg "disabled, governor not available"
log_action_end_msg $RETVAL
fi
;;
stop)
;;
*)
echo "Usage: $0 {start|stop|restart|reload|force-reload}"
exit 1
esac
exit 0
anthony@AR-X542UAR:~$
Pour info, en ce qui concerne la limite matérielle, j'avais désactivé intel paste dans le grub pour accéder à plus de réglages de gouverneurs (à la demande et conservateur ...). Je l'ai enlevé et je ne retrouve plus que performances ou powersave ... Mais la limite matérielle est enlevée et j'ai bien 3.40 Gh en performance.
