Bon, j'ai modifié la commande x11vnc en rajoutant -v, mais aussi -o, et ça donne ceci:
Acer GX723
###############################################################
#@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@#
#@ @#
#@ ** WARNING ** WARNING ** WARNING ** WARNING ** @#
#@ @#
#@ YOU ARE RUNNING X11VNC WITHOUT A PASSWORD!! @#
#@ @#
#@ This means anyone with network access to this computer @#
#@ may be able to view and control your desktop. @#
#@ @#
#@ >>> If you did not mean to do this Press CTRL-C now!! <<< @#
#@ @#
#@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@#
#@ @#
#@ You can create an x11vnc password file by running: @#
#@ @#
#@ x11vnc -storepasswd password /path/to/passfile @#
#@ or x11vnc -storepasswd /path/to/passfile @#
#@ or x11vnc -storepasswd @#
#@ @#
#@ (the last one will use ~/.vnc/passwd) @#
#@ @#
#@ and then starting x11vnc via: @#
#@ @#
#@ x11vnc -rfbauth /path/to/passfile @#
#@ @#
#@ an existing ~/.vnc/passwd file from another VNC @#
#@ application will work fine too. @#
#@ @#
#@ You can also use the -passwdfile or -passwd options. @#
#@ (note -passwd is unsafe if local users are not trusted) @#
#@ @#
#@ Make sure any -rfbauth and -passwdfile password files @#
#@ cannot be read by untrusted users. @#
#@ @#
#@ Use x11vnc -usepw to automatically use your @#
#@ ~/.vnc/passwd or ~/.vnc/passwdfile password files. @#
#@ (and prompt you to create ~/.vnc/passwd if neither @#
#@ file exists.) Under -usepw, x11vnc will exit if it @#
#@ cannot find a password to use. @#
#@ @#
#@ @#
#@ Even with a password, the subsequent VNC traffic is @#
#@ sent in the clear. Consider tunnelling via ssh(1): @#
#@ @#
#@ http://www.karlrunge.com/x11vnc/#tunnelling @#
#@ @#
#@ Or using the x11vnc SSL options: -ssl and -stunnel @#
#@ @#
#@ Please Read the documention for more info about @#
#@ passwords, security, and encryption. @#
#@ @#
#@ http://www.karlrunge.com/x11vnc/faq.html#faq-passwd @#
#@ @#
#@ To disable this warning use the -nopw option, or put @#
#@ 'nopw' on a line in your ~/.x11vncrc file. @#
#@ @#
#@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@#
###############################################################
Settings:
display: :0
authfile: null
subwin: 0x0
-sid mode: 0
clip: null
flashcmap: 0
shiftcmap: 0
force_idx: 0
cmap8to24: 0
8to24_opts: null
24to32: 0
visual: null
overlay: 0
ovl_cursor: 1
scaling: 0 1.0000 1.0000
viewonly: 0
shared: 0
conn_once: 1
timeout: 0
ping: 0
inetd: 0
tightfilexfer: 0
http: 0
connect: null
connectfile null
vnc_conn: 1
allow: null
input: null
passfile: null
unixpw: 0
unixpw_lst: null
ssl: null
ssldir: null
ssltimeout -1
sslverify: null
stunnel: 0
accept: null
accept: null
gone: null
users: null
using_shm: 1
flipbytes: 0
onetile: 0
solid: null
blackout: null
xinerama: 1
xtrap: 0
xrandr: 0
xrandrmode: null
padgeom: null
logfile: /home/alain/x11vnc.log
logappend: 0
flag: null
rm_flag: null
rc_file: ""
norc: 0
dbg: 0
bg: 0
mod_tweak: 1
isolevel3: 0
xkb: 0
skipkeys: null
sloppykeys: 0
skip_dups: 0
addkeysyms: 1
xkbcompat: 0
clearmods: 0
remap: null
norepeat: 1
norepeatcnt:2
nofb: 0
watchbell: 1
watchsel: 1
watchprim: 1
seldir: null
cursor: 1
multicurs: 0
curs_mode: null
arrow: 1
xfixes: 1
alphacut: 240
alphafrac: 0.33
alpharemove:0
alphablend: 1
cursorshape:1
cursorpos: 1
xwarpptr: 0
alwaysinj: 0
buttonmap: null
dragging: 1
ncache: 0
wireframe: 0xff,2,0,32+8+8+8,all,0.15+0.30+5.0+0.125
wirecopy: always
scrollcopy: always
scr_area: 60000
scr_skip: ##Soffice.bin,##StarOffice,##OpenOffice
scr_inc: ##Nomatch
scr_keys: null
scr_term: null
scr_keyrep: null
scr_parms: 0+64+32+32,0.02+0.10+0.9,0.03+0.06+0.5+0.1+5.0
fixscreen: null
noxrecord: 0
grabbuster: 0
ptr_mode: 2
inputskip: 10
speeds: null
wmdt: null
debug_ptr: 0
debug_key: 0
defer: 20
waitms: 20
wait_ui: 2.00
nowait_bog: 0
slow_fb: 0.00
xrefresh: 0.00
readtimeout: 20
take_naps: 1
sb: 60
fbpm: 1
dpms: 1
xdamage: 1
xd_area: 20000
xd_mem: 1.000
sigpipe: null
threads: 0
fs_frac: 0.75
gaps_fill: 4
grow_fill: 3
tile_fuzz: 2
snapfb: 0
rawfb: null
pipeinput: null
gui: 0
gui_mode: null
noremote: 0
unsafe: 0
privremote: 0
safer: 0
nocmds: 0
deny_all: 0
pid: 11316
10/08/2018 09:13:19 x11vnc version: 0.9.13 lastmod: 2011-08-10 pid: 11316
10/08/2018 09:13:19 Using X display :0
10/08/2018 09:13:19 rootwin: 0x251 reswin: 0x4400001 dpy: 0x2816260
10/08/2018 09:13:19
10/08/2018 09:13:19 ------------------ USEFUL INFORMATION ------------------
10/08/2018 09:13:19 X DAMAGE available on display, using it for polling hints.
10/08/2018 09:13:19 To disable this behavior use: '-noxdamage'
10/08/2018 09:13:19
10/08/2018 09:13:19 Most compositing window managers like 'compiz' or 'beryl'
10/08/2018 09:13:19 cause X DAMAGE to fail, and so you may not see any screen
10/08/2018 09:13:19 updates via VNC. Either disable 'compiz' (recommended) or
10/08/2018 09:13:19 supply the x11vnc '-noxdamage' command line option.
10/08/2018 09:13:19
10/08/2018 09:13:19 Wireframing: -wireframe mode is in effect for window moves.
10/08/2018 09:13:19 If this yields undesired behavior (poor response, painting
10/08/2018 09:13:19 errors, etc) it may be disabled:
10/08/2018 09:13:19 - use '-nowf' to disable wireframing completely.
10/08/2018 09:13:19 - use '-nowcr' to disable the Copy Rectangle after the
10/08/2018 09:13:19 moved window is released in the new position.
10/08/2018 09:13:19 Also see the -help entry for tuning parameters.
10/08/2018 09:13:19 You can press 3 Alt_L's (Left "Alt" key) in a row to
10/08/2018 09:13:19 repaint the screen, also see the -fixscreen option for
10/08/2018 09:13:19 periodic repaints.
10/08/2018 09:13:19 Note: '-scale' is on and this can cause more problems.
10/08/2018 09:13:19
10/08/2018 09:13:19 XFIXES available on display, resetting cursor mode
10/08/2018 09:13:19 to: '-cursor most'.
10/08/2018 09:13:19 to disable this behavior use: '-cursor arrow'
10/08/2018 09:13:19 or '-noxfixes'.
10/08/2018 09:13:19 using XFIXES for cursor drawing.
10/08/2018 09:13:19 GrabServer control via XTEST.
10/08/2018 09:13:19
10/08/2018 09:13:19 Scroll Detection: -scrollcopyrect mode is in effect to
10/08/2018 09:13:19 use RECORD extension to try to detect scrolling windows
10/08/2018 09:13:19 (induced by either user keystroke or mouse input).
10/08/2018 09:13:19 If this yields undesired behavior (poor response, painting
10/08/2018 09:13:19 errors, etc) it may be disabled via: '-noscr'
10/08/2018 09:13:19 Also see the -help entry for tuning parameters.
10/08/2018 09:13:19 You can press 3 Alt_L's (Left "Alt" key) in a row to
10/08/2018 09:13:19 repaint the screen, also see the -fixscreen option for
10/08/2018 09:13:19 periodic repaints.
10/08/2018 09:13:19 Note: '-scale' is on and this can cause more problems.
10/08/2018 09:13:19
10/08/2018 09:13:19 XKEYBOARD: number of keysyms per keycode 7 is greater
10/08/2018 09:13:19 than 4 and 51 keysyms are mapped above 4.
10/08/2018 09:13:19 Automatically switching to -xkb mode.
10/08/2018 09:13:19 If this makes the key mapping worse you can
10/08/2018 09:13:19 disable it with the "-noxkb" option.
10/08/2018 09:13:19 Also, remember "-remap DEAD" for accenting characters.
10/08/2018 09:13:19
10/08/2018 09:13:19 X FBPM extension not supported.
10/08/2018 09:13:19 X display is capable of DPMS.
10/08/2018 09:13:19 --------------------------------------------------------
10/08/2018 09:13:19
10/08/2018 09:13:19 Default visual ID: 0x21
10/08/2018 09:13:19 Read initial data from X display into framebuffer.
10/08/2018 09:13:19 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/5760
10/08/2018 09:13:19 reset scaled width 1267 -> 1268 to be a multiple of 4 (to
10/08/2018 09:13:19 make vncviewers happy). use -scale m/n:n4 to disable.
10/08/2018 09:13:19 scaling screen: 1440x900 -> 1268x792
10/08/2018 09:13:19 scaling screen: scale_fac_x=0.88000 scale_fac_y=0.88000
10/08/2018 09:13:19
10/08/2018 09:13:19 X display :0 is 32bpp depth=24 true color
FrameBuffer Info:
width: 1440
height: 900
scaled_width: 1268
scaled_height: 792
indexed_color: 0
bits_per_pixel: 32
depth: 24
red_mask: 0x00ff0000 00000000111111110000000000000000
green_mask: 0x0000ff00 00000000000000001111111100000000
blue_mask: 0x000000ff 00000000000000000000000011111111
red: max: 255 shift: 16
green: max: 255 shift: 8
blue: max: 255 shift: 0
mainfb_bytes_per_line: 5760
rfb_fb_bytes_per_line: 5072
rot_fb_bytes_per_line: 0
raw_fb_bytes_per_line: 0
format: ZPixmap
byte_order: LSBFirst
bitmap_pad: 32
bitmap_unit: 32
bitmap_bit_order: LSBFirst
rfb_fb: 0x286f340
main_fb: 0x7fcc28fd5010
8to24_fb: (nil)
rot_fb: (nil)
snap_fb: (nil)
raw_fb: (nil)
fake_fb: (nil)
10/08/2018 09:13:19 setting up 32 cursors...
10/08/2018 09:13:19 done.
10/08/2018 09:13:19
10/08/2018 09:13:19 Autoprobing TCP port
10/08/2018 09:13:19 Autoprobing selected TCP port 5900
10/08/2018 09:13:19 Autoprobing TCP6 port
10/08/2018 09:13:19 Autoprobing selected TCP6 port 5900
10/08/2018 09:13:19 listen6: bind: Address already in use
10/08/2018 09:13:19 Not listening on IPv6 interface.
10/08/2018 09:13:19
10/08/2018 09:13:19 Xinerama is present and active (e.g. multi-head).
10/08/2018 09:13:19 Xinerama: number of sub-screens: 1
10/08/2018 09:13:19 Xinerama: no blackouts needed (only one sub-screen)
10/08/2018 09:13:19
10/08/2018 09:13:19 created 45 tile_row shm polling images.
10/08/2018 09:13:19 fb read rate: 158 MB/sec
10/08/2018 09:13:19 fast read: reset -wait ms to: 10
10/08/2018 09:13:19 fast read: reset -defer ms to: 10
10/08/2018 09:13:19 The X server says there are 15 mouse buttons.
10/08/2018 09:13:19 screen setup finished.
10/08/2018 09:13:19
10/08/2018 09:13:19 WARNING: You are running x11vnc WITHOUT a password. See
10/08/2018 09:13:19 WARNING: the warning message printed above for more info.
10/08/2018 09:13:19
The VNC desktop is: aupeix-GX723:0
******************************************************************************
Have you tried the x11vnc '-ncache' VNC client-side pixel caching feature yet?
The scheme stores pixel data offscreen on the VNC viewer side for faster
retrieval. It should work with any VNC viewer. Try it by running:
x11vnc -ncache 10 ...
One can also add -ncache_cr for smooth 'copyrect' window motion.
More info: http://www.karlrunge.com/x11vnc/faq.html#faq-client-caching
10/08/2018 09:13:23 Got connection from client 127.0.0.1
10/08/2018 09:13:23 other clients:
10/08/2018 09:13:23 Normal socket connection
10/08/2018 09:13:23 Disabled X server key autorepeat.
10/08/2018 09:13:23 to force back on run: 'xset r on' (3 times)
10/08/2018 09:13:23 incr accepted_client=1 for 127.0.0.1:55862 sock=12
10/08/2018 09:13:23 Client Protocol Version 3.8
10/08/2018 09:13:23 Protocol version sent 3.8, using 3.8
10/08/2018 09:13:23 rfbProcessClientSecurityType: executing handler for type 1
10/08/2018 09:13:23 rfbProcessClientSecurityType: returning securityResult for client rfb version >= 3.8
10/08/2018 09:13:23 Pixel format for client 127.0.0.1:
10/08/2018 09:13:23 8 bpp, depth 6
10/08/2018 09:13:23 true colour: max r 3 g 3 b 3, shift r 4 g 2 b 0
10/08/2018 09:13:23 Enabling full-color cursor updates for client 127.0.0.1
10/08/2018 09:13:23 Enabling NewFBSize protocol extension for client 127.0.0.1
10/08/2018 09:13:23 Using ZRLE encoding for client 127.0.0.1
10/08/2018 09:13:23 Pixel format for client 127.0.0.1:
10/08/2018 09:13:23 32 bpp, depth 24, little endian
10/08/2018 09:13:23 true colour: max r 255 g 255 b 255, shift r 16 g 8 b 0
10/08/2018 09:13:23 no translation needed
10/08/2018 09:13:23 Enabling full-color cursor updates for client 127.0.0.1
10/08/2018 09:13:23 Enabling NewFBSize protocol extension for client 127.0.0.1
10/08/2018 09:13:23 Switching from ZRLE to hextile Encoding for client 127.0.0.1
10/08/2018 09:13:24 client 1 network rate 5709.5 KB/sec (14285.4 eff KB/sec)
10/08/2018 09:13:24 client 1 latency: 1.0 ms
10/08/2018 09:13:24 dt1: 0.0480, dt2: 0.2338 dt3: 0.0010 bytes: 1605893
10/08/2018 09:13:24 link_rate: LR_LAN - 1 ms, 5709 KB/s
10/08/2018 09:13:24 client useCopyRect: 127.0.0.1 -1
10/08/2018 09:13:24 client_set_net: 127.0.0.1 0.0004
10/08/2018 09:13:24 created xdamage object: 0x4400031
10/08/2018 09:13:24 copy_tiles: allocating first_line at size 46
10/08/2018 09:13:29 Enabling full-color cursor updates for client 127.0.0.1
10/08/2018 09:13:29 Enabling NewFBSize protocol extension for client 127.0.0.1
10/08/2018 09:13:29 Switching from hextile to raw Encoding for client 127.0.0.1
10/08/2018 09:13:31 cursor_noshape_updates_clients: 0
10/08/2018 09:13:31 cursor_noshape_updates_clients: 0
10/08/2018 09:13:33 created selwin: 0x4400032
10/08/2018 09:13:33 called initialize_xfixes()
10/08/2018 09:14:01 Got connection from client 45.199.154.16
10/08/2018 09:14:01 other clients:
10/08/2018 09:14:01 127.0.0.1
10/08/2018 09:14:01 Normal socket connection
10/08/2018 09:14:01 denying additional client: 45.199.154.16:3038
10/08/2018 09:14:01 Client 45.199.154.16 gone
10/08/2018 09:14:01 Statistics events Transmit/ RawEquiv ( saved)
10/08/2018 09:14:01 TOTALS : 0 | 0/ 0 ( 0.0%)
10/08/2018 09:14:01 Statistics events Received/ RawEquiv ( saved)
10/08/2018 09:14:01 TOTALS : 0 | 0/ 0 ( 0.0%)
10/08/2018 09:14:45 cursor_noshape_updates_clients: 0
10/08/2018 09:15:45 cursor_noshape_updates_clients: 0
HP15
###############################################################
#@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@#
#@ @#
#@ ** WARNING ** WARNING ** WARNING ** WARNING ** @#
#@ @#
#@ YOU ARE RUNNING X11VNC WITHOUT A PASSWORD!! @#
#@ @#
#@ This means anyone with network access to this computer @#
#@ may be able to view and control your desktop. @#
#@ @#
#@ >>> If you did not mean to do this Press CTRL-C now!! <<< @#
#@ @#
#@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@#
#@ @#
#@ You can create an x11vnc password file by running: @#
#@ @#
#@ x11vnc -storepasswd password /path/to/passfile @#
#@ or x11vnc -storepasswd /path/to/passfile @#
#@ or x11vnc -storepasswd @#
#@ @#
#@ (the last one will use ~/.vnc/passwd) @#
#@ @#
#@ and then starting x11vnc via: @#
#@ @#
#@ x11vnc -rfbauth /path/to/passfile @#
#@ @#
#@ an existing ~/.vnc/passwd file from another VNC @#
#@ application will work fine too. @#
#@ @#
#@ You can also use the -passwdfile or -passwd options. @#
#@ (note -passwd is unsafe if local users are not trusted) @#
#@ @#
#@ Make sure any -rfbauth and -passwdfile password files @#
#@ cannot be read by untrusted users. @#
#@ @#
#@ Use x11vnc -usepw to automatically use your @#
#@ ~/.vnc/passwd or ~/.vnc/passwdfile password files. @#
#@ (and prompt you to create ~/.vnc/passwd if neither @#
#@ file exists.) Under -usepw, x11vnc will exit if it @#
#@ cannot find a password to use. @#
#@ @#
#@ @#
#@ Even with a password, the subsequent VNC traffic is @#
#@ sent in the clear. Consider tunnelling via ssh(1): @#
#@ @#
#@ http://www.karlrunge.com/x11vnc/#tunnelling @#
#@ @#
#@ Or using the x11vnc SSL options: -ssl and -stunnel @#
#@ @#
#@ Please Read the documention for more info about @#
#@ passwords, security, and encryption. @#
#@ @#
#@ http://www.karlrunge.com/x11vnc/faq.html#faq-passwd @#
#@ @#
#@ To disable this warning use the -nopw option, or put @#
#@ 'nopw' on a line in your ~/.x11vncrc file. @#
#@ @#
#@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@#
###############################################################
Settings:
display: :0
authfile: null
subwin: 0x0
-sid mode: 0
clip: null
flashcmap: 0
shiftcmap: 0
force_idx: 0
cmap8to24: 0
8to24_opts: null
24to32: 0
visual: null
overlay: 0
ovl_cursor: 1
scaling: 0 1.0000 1.0000
viewonly: 0
shared: 0
conn_once: 1
timeout: 0
ping: 0
inetd: 0
tightfilexfer: 0
http: 0
connect: null
connectfile null
vnc_conn: 1
allow: null
input: null
passfile: null
unixpw: 0
unixpw_lst: null
ssl: null
ssldir: null
ssltimeout -1
sslverify: null
stunnel: 0
accept: null
accept: null
gone: null
users: null
using_shm: 1
flipbytes: 0
onetile: 0
solid: null
blackout: null
xinerama: 1
xtrap: 0
xrandr: 0
xrandrmode: null
padgeom: null
logfile: /home/beatrice/x11vnc.log
logappend: 0
flag: null
rm_flag: null
rc_file: ""
norc: 0
dbg: 0
bg: 0
mod_tweak: 1
isolevel3: 0
xkb: 0
skipkeys: null
sloppykeys: 0
skip_dups: 0
addkeysyms: 1
xkbcompat: 0
clearmods: 0
remap: null
norepeat: 1
norepeatcnt:2
nofb: 0
watchbell: 1
watchsel: 1
watchprim: 1
seldir: null
cursor: 1
multicurs: 0
curs_mode: null
arrow: 1
xfixes: 1
alphacut: 240
alphafrac: 0.33
alpharemove:0
alphablend: 1
cursorshape:1
cursorpos: 1
xwarpptr: 0
alwaysinj: 0
buttonmap: null
dragging: 1
ncache: 0
wireframe: 0xff,2,0,32+8+8+8,all,0.15+0.30+5.0+0.125
wirecopy: always
scrollcopy: always
scr_area: 60000
scr_skip: ##Soffice.bin,##StarOffice,##OpenOffice
scr_inc: ##Nomatch
scr_keys: null
scr_term: null
scr_keyrep: null
scr_parms: 0+64+32+32,0.02+0.10+0.9,0.03+0.06+0.5+0.1+5.0
fixscreen: null
noxrecord: 0
grabbuster: 0
ptr_mode: 2
inputskip: 10
speeds: null
wmdt: null
debug_ptr: 0
debug_key: 0
defer: 20
waitms: 20
wait_ui: 2.00
nowait_bog: 0
slow_fb: 0.00
xrefresh: 0.00
readtimeout: 20
take_naps: 1
sb: 60
fbpm: 1
dpms: 1
xdamage: 1
xd_area: 20000
xd_mem: 1.000
sigpipe: null
threads: 0
fs_frac: 0.75
gaps_fill: 4
grow_fill: 3
tile_fuzz: 2
snapfb: 0
rawfb: null
pipeinput: null
gui: 0
gui_mode: null
noremote: 0
unsafe: 0
privremote: 0
safer: 0
nocmds: 0
deny_all: 0
pid: 5886
10/08/2018 09:17:39 x11vnc version: 0.9.13 lastmod: 2011-08-10 pid: 5886
10/08/2018 09:17:39 Using X display :0
10/08/2018 09:17:39 rootwin: 0x5f7 reswin: 0x1c00001 dpy: 0x24a2380
10/08/2018 09:17:39
10/08/2018 09:17:39 ------------------ USEFUL INFORMATION ------------------
10/08/2018 09:17:39 X DAMAGE available on display, using it for polling hints.
10/08/2018 09:17:39 To disable this behavior use: '-noxdamage'
10/08/2018 09:17:39
10/08/2018 09:17:39 Most compositing window managers like 'compiz' or 'beryl'
10/08/2018 09:17:39 cause X DAMAGE to fail, and so you may not see any screen
10/08/2018 09:17:39 updates via VNC. Either disable 'compiz' (recommended) or
10/08/2018 09:17:39 supply the x11vnc '-noxdamage' command line option.
10/08/2018 09:17:39
10/08/2018 09:17:39 Wireframing: -wireframe mode is in effect for window moves.
10/08/2018 09:17:39 If this yields undesired behavior (poor response, painting
10/08/2018 09:17:39 errors, etc) it may be disabled:
10/08/2018 09:17:39 - use '-nowf' to disable wireframing completely.
10/08/2018 09:17:39 - use '-nowcr' to disable the Copy Rectangle after the
10/08/2018 09:17:39 moved window is released in the new position.
10/08/2018 09:17:39 Also see the -help entry for tuning parameters.
10/08/2018 09:17:39 You can press 3 Alt_L's (Left "Alt" key) in a row to
10/08/2018 09:17:39 repaint the screen, also see the -fixscreen option for
10/08/2018 09:17:39 periodic repaints.
10/08/2018 09:17:39 Note: '-scale' is on and this can cause more problems.
10/08/2018 09:17:39
10/08/2018 09:17:39 XFIXES available on display, resetting cursor mode
10/08/2018 09:17:39 to: '-cursor most'.
10/08/2018 09:17:39 to disable this behavior use: '-cursor arrow'
10/08/2018 09:17:39 or '-noxfixes'.
10/08/2018 09:17:39 using XFIXES for cursor drawing.
10/08/2018 09:17:39 GrabServer control via XTEST.
10/08/2018 09:17:39
10/08/2018 09:17:39 Scroll Detection: -scrollcopyrect mode is in effect to
10/08/2018 09:17:39 use RECORD extension to try to detect scrolling windows
10/08/2018 09:17:39 (induced by either user keystroke or mouse input).
10/08/2018 09:17:39 If this yields undesired behavior (poor response, painting
10/08/2018 09:17:39 errors, etc) it may be disabled via: '-noscr'
10/08/2018 09:17:39 Also see the -help entry for tuning parameters.
10/08/2018 09:17:39 You can press 3 Alt_L's (Left "Alt" key) in a row to
10/08/2018 09:17:39 repaint the screen, also see the -fixscreen option for
10/08/2018 09:17:39 periodic repaints.
10/08/2018 09:17:39 Note: '-scale' is on and this can cause more problems.
10/08/2018 09:17:39
10/08/2018 09:17:39 XKEYBOARD: number of keysyms per keycode 7 is greater
10/08/2018 09:17:39 than 4 and 51 keysyms are mapped above 4.
10/08/2018 09:17:39 Automatically switching to -xkb mode.
10/08/2018 09:17:39 If this makes the key mapping worse you can
10/08/2018 09:17:39 disable it with the "-noxkb" option.
10/08/2018 09:17:39 Also, remember "-remap DEAD" for accenting characters.
10/08/2018 09:17:39
10/08/2018 09:17:39 X FBPM extension not supported.
10/08/2018 09:17:39 X display is capable of DPMS.
10/08/2018 09:17:39 --------------------------------------------------------
10/08/2018 09:17:39
10/08/2018 09:17:39 Default visual ID: 0x41
10/08/2018 09:17:39 Read initial data from X display into framebuffer.
10/08/2018 09:17:39 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/13144
10/08/2018 09:17:39 reset scaled width 3023 -> 3024 to be a multiple of 4 (to
10/08/2018 09:17:39 make vncviewers happy). use -scale m/n:n4 to disable.
10/08/2018 09:17:39 scaling screen: 3286x1080 -> 3024x993
10/08/2018 09:17:39 scaling screen: scale_fac_x=0.92000 scale_fac_y=0.92000
10/08/2018 09:17:39
10/08/2018 09:17:39 X display :0 is 32bpp depth=24 true color
FrameBuffer Info:
width: 3286
height: 1080
scaled_width: 3024
scaled_height: 993
indexed_color: 0
bits_per_pixel: 32
depth: 24
red_mask: 0x00ff0000 00000000111111110000000000000000
green_mask: 0x0000ff00 00000000000000001111111100000000
blue_mask: 0x000000ff 00000000000000000000000011111111
red: max: 255 shift: 16
green: max: 255 shift: 8
blue: max: 255 shift: 0
mainfb_bytes_per_line: 13144
rfb_fb_bytes_per_line: 12096
rot_fb_bytes_per_line: 0
raw_fb_bytes_per_line: 0
format: ZPixmap
byte_order: LSBFirst
bitmap_pad: 32
bitmap_unit: 32
bitmap_bit_order: LSBFirst
rfb_fb: 0x251e710
main_fb: 0x7f0b23a2d010
8to24_fb: (nil)
rot_fb: (nil)
snap_fb: (nil)
raw_fb: (nil)
fake_fb: (nil)
10/08/2018 09:17:39 setting up 32 cursors...
10/08/2018 09:17:39 done.
10/08/2018 09:17:39
10/08/2018 09:17:40 Autoprobing TCP port
10/08/2018 09:17:40 Autoprobing selected TCP port 5900
10/08/2018 09:17:40 Autoprobing TCP6 port
10/08/2018 09:17:40 Autoprobing selected TCP6 port 5900
10/08/2018 09:17:40 listen6: bind: Address already in use
10/08/2018 09:17:40 Not listening on IPv6 interface.
10/08/2018 09:17:40
10/08/2018 09:17:40 Xinerama is present and active (e.g. multi-head).
10/08/2018 09:17:40 Xinerama: number of sub-screens: 2
10/08/2018 09:17:40 Xinerama: enabling -xwarppointer mode to try to correct
10/08/2018 09:17:40 Xinerama: mouse pointer motion. XTEST+XINERAMA bug.
10/08/2018 09:17:40 Xinerama: Use -noxwarppointer to force XTEST.
10/08/2018 09:17:40 Xinerama: sub-screen[0] 1366x768+0+0
10/08/2018 09:17:40 Xinerama: sub-screen[1] 1920x1080+1366+0
10/08/2018 09:17:40 blackout rect: 1366x312+0+768: x=0-1366 y=768-1080
10/08/2018 09:17:40
10/08/2018 09:17:40 created 1 tile_row shm polling images.
10/08/2018 09:17:40 fb read rate: 451 MB/sec
10/08/2018 09:17:40 fast read: reset -wait ms to: 10
10/08/2018 09:17:40 fast read: reset -defer ms to: 10
10/08/2018 09:17:40 The X server says there are 13 mouse buttons.
10/08/2018 09:17:40 screen setup finished.
10/08/2018 09:17:40
10/08/2018 09:17:40 WARNING: You are running x11vnc WITHOUT a password. See
10/08/2018 09:17:40 WARNING: the warning message printed above for more info.
10/08/2018 09:17:40
The VNC desktop is: hp15-ubuntu:0
******************************************************************************
Have you tried the x11vnc '-ncache' VNC client-side pixel caching feature yet?
The scheme stores pixel data offscreen on the VNC viewer side for faster
retrieval. It should work with any VNC viewer. Try it by running:
x11vnc -ncache 10 ...
One can also add -ncache_cr for smooth 'copyrect' window motion.
More info: http://www.karlrunge.com/x11vnc/faq.html#faq-client-caching
10/08/2018 09:17:42 Got connection from client 127.0.0.1
10/08/2018 09:17:42 other clients:
10/08/2018 09:17:42 Normal socket connection
10/08/2018 09:17:42 Disabled X server key autorepeat.
10/08/2018 09:17:42 to force back on run: 'xset r on' (3 times)
10/08/2018 09:17:42 incr accepted_client=1 for 127.0.0.1:37292 sock=12
10/08/2018 09:17:42 Client Protocol Version 3.8
10/08/2018 09:17:42 Protocol version sent 3.8, using 3.8
10/08/2018 09:17:42 rfbProcessClientSecurityType: executing handler for type 1
10/08/2018 09:17:42 rfbProcessClientSecurityType: returning securityResult for client rfb version >= 3.8
10/08/2018 09:17:42 Pixel format for client 127.0.0.1:
10/08/2018 09:17:42 8 bpp, depth 6
10/08/2018 09:17:42 true colour: max r 3 g 3 b 3, shift r 4 g 2 b 0
10/08/2018 09:17:42 Enabling full-color cursor updates for client 127.0.0.1
10/08/2018 09:17:42 Enabling NewFBSize protocol extension for client 127.0.0.1
10/08/2018 09:17:42 Using ZRLE encoding for client 127.0.0.1
10/08/2018 09:17:43 Pixel format for client 127.0.0.1:
10/08/2018 09:17:43 32 bpp, depth 24, little endian
10/08/2018 09:17:43 true colour: max r 255 g 255 b 255, shift r 16 g 8 b 0
10/08/2018 09:17:43 no translation needed
10/08/2018 09:17:43 Enabling full-color cursor updates for client 127.0.0.1
10/08/2018 09:17:43 Enabling NewFBSize protocol extension for client 127.0.0.1
10/08/2018 09:17:43 Switching from ZRLE to hextile Encoding for client 127.0.0.1
10/08/2018 09:17:44 Enabling full-color cursor updates for client 127.0.0.1
10/08/2018 09:17:44 Enabling NewFBSize protocol extension for client 127.0.0.1
10/08/2018 09:17:44 Switching from hextile to raw Encoding for client 127.0.0.1
10/08/2018 09:17:44 client 1 network rate 114.4 KB/sec (2569.5 eff KB/sec)
10/08/2018 09:17:44 client 1 latency: 1.8 ms
10/08/2018 09:17:44 dt1: 0.0755, dt2: 1.0942 dt3: 0.0018 bytes: 133725
10/08/2018 09:17:44 link_rate: LR_BROADBAND - 1 ms, 114 KB/s
10/08/2018 09:17:44 client useCopyRect: 127.0.0.1 -1
10/08/2018 09:17:44 client_set_net: 127.0.0.1 0.0007
10/08/2018 09:17:44 created xdamage object: 0x1c00005
10/08/2018 09:17:44 copy_tiles: allocating first_line at size 104
10/08/2018 09:17:50 increased wireframe timeouts for slow network connection.
10/08/2018 09:17:50 netrate: 114 KB/sec, latency: 1 ms
10/08/2018 09:17:50 cursor_noshape_updates_clients: 0
10/08/2018 09:17:52 created selwin: 0x1c00006
10/08/2018 09:17:52 called initialize_xfixes()
10/08/2018 09:17:54 cursor_noshape_updates_clients: 0
10/08/2018 09:17:54 non-existent cursor: which=9
10/08/2018 09:18:38 cursor_noshape_updates_clients: 0
Je vais passer çà à meld, ça sera plus digeste ...
A+
