Bonjour,
Merci pour ton conseil effectivement j'ai verifié les ports USB tout est correcte, j'ai lancé une réinisialisation ça ne donne pas grand chose :rolleyes::/
linuxmint:~$ df -h
Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur
udev 7,8G 0 7,8G 0% /dev
tmpfs 1,6G 1,5M 1,6G 1% /run
/dev/sdb1 210G 21G 179G 11% /
tmpfs 7,9G 25M 7,8G 1% /dev/shm
tmpfs 5,0M 4,0K 5,0M 1% /run/lock
tmpfs 7,9G 0 7,9G 0% /sys/fs/cgroup
/dev/sda 917G 407G 464G 47% /home
tmpfs 1,6G 68K 1,6G 1% /run/user/1000
/dev/sdc5 466G 187G 280G 41% /media/patrice/StockageData
dmesg
linuxmint:~$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0xc2, date = 2017-11-16
[ 0.000000] Linux version 4.15.0-32-generic (buildd@lgw01-amd64-039) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #35-Ubuntu SMP Fri Aug 10 17:58:07 UTC 2018 (Ubuntu 4.15.0-32.35-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-32-generic root=UUID=c1e48aed-1193-4e82-986d-e56c0e4d1602 ro quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cd84ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd850000-0x00000000cd87efff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cd87f000-0x00000000cf390fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf391000-0x00000000cf391fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cf392000-0x00000000cf3abfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf3ac000-0x00000000d506afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d506b000-0x00000000d674afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d674b000-0x00000000d676dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d676e000-0x00000000d696bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d696c000-0x00000000d70a2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d70a3000-0x00000000d7bfefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d7bff000-0x00000000d7bfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d7c00000-0x00000000d7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000426ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0 present.
[ 0.000000] DMI: System manufacturer System Product Name/H110M-K, BIOS 1802 05/20/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x427000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 1 base 00D8000000 mask 7FF8000000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0xd7c00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcc10-0x000fcc1f] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 96000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x1bcf3f000, 0x1bcf3ffff] PGTABLE
[ 0.000000] BRK [0x1bcf40000, 0x1bcf40fff] PGTABLE
[ 0.000000] BRK [0x1bcf41000, 0x1bcf41fff] PGTABLE
[ 0.000000] BRK [0x1bcf42000, 0x1bcf42fff] PGTABLE
[ 0.000000] BRK [0x1bcf43000, 0x1bcf43fff] PGTABLE
[ 0.000000] BRK [0x1bcf44000, 0x1bcf44fff] PGTABLE
[ 0.000000] BRK [0x1bcf45000, 0x1bcf45fff] PGTABLE
[ 0.000000] BRK [0x1bcf46000, 0x1bcf46fff] PGTABLE
[ 0.000000] BRK [0x1bcf47000, 0x1bcf47fff] PGTABLE
[ 0.000000] BRK [0x1bcf48000, 0x1bcf48fff] PGTABLE
[ 0.000000] BRK [0x1bcf49000, 0x1bcf49fff] PGTABLE
[ 0.000000] BRK [0x1bcf4a000, 0x1bcf4afff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x31095000-0x34841fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000CD8500A0 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CD873320 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CD8501E8 023134 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000D70A2F80 000040
[ 0.000000] ACPI: APIC 0x00000000CD873430 000068 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CD873498 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000CD8734E0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000CD873580 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CD8735C0 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
[ 0.000000] ACPI: SSDT 0x00000000CD8735F8 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: LPIT 0x00000000CD873968 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000CD873A00 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CD873C48 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CD8767F8 000BE3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CD8773E0 0004A3 (v02 INTEL zpodd 00001000 INTL 20120913)
[ 0.000000] ACPI: DBGP 0x00000000CD877888 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x00000000CD8778C0 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000CD877918 000705 (v02 INTEL xh_rvp08 00000000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CD878020 005359 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000CD87D380 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x00000000CD87D3C8 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000426ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x426fd5000-0x426ffffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000426ffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cd84ffff]
[ 0.000000] node 0: [mem 0x00000000cd87f000-0x00000000cf390fff]
[ 0.000000] node 0: [mem 0x00000000cf3ac000-0x00000000d506afff]
[ 0.000000] node 0: [mem 0x00000000d676e000-0x00000000d696bfff]
[ 0.000000] node 0: [mem 0x00000000d7bff000-0x00000000d7bfffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000426ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000426ffffff]
[ 0.000000] On node 0 totalpages: 4178363
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13577 pages used for memmap
[ 0.000000] DMA32 zone: 868896 pages, LIFO batch:31
[ 0.000000] Normal zone: 51648 pages used for memmap
[ 0.000000] Normal zone: 3305472 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 101 pages
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd850000-0xcd87efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf391000-0xcf391fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf392000-0xcf3abfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd506b000-0xd674afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd674b000-0xd676dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd696c000-0xd70a2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd70a3000-0xd7bfefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7c00000-0xd7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xd8000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u1048576
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4113053
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-32-generic root=UUID=c1e48aed-1193-4e82-986d-e56c0e4d1602 ro quiet splash vt.handoff=1
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16299708K/16713452K available (12300K kernel code, 2470K rwdata, 4244K rodata, 2408K init, 2416K bss, 413744K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39116 entries in 153 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 524544, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#1
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20170831/dswload-210)
[ 0.000000] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170831/psobject-252)
[ 0.000000] ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20170831/tbxfload-228)
[ 0.000000] ACPI Error: 1 table load failures, 8 successful (20170831/tbxfload-246)
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.004000] APIC: Switch to symmetric I/O mode setup
[ 0.004000] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.028000] tsc: Detected 3300.000 MHz processor
[ 0.028000] tsc: Detected 3312.000 MHz TSC
[ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6624.00 BogoMIPS (lpj=13248000)
[ 0.028000] pid_max: default: 32768 minimum: 301
[ 0.028000] Security Framework initialized
[ 0.028000] Yama: becoming mindful.
[ 0.028000] AppArmor: AppArmor initialized
[ 0.028000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.028000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.028000] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.028000] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.028000] mce: CPU supports 8 MCE banks
[ 0.028000] CPU0: Thermal monitoring enabled (TM1)
[ 0.028000] process: using mwait in idle threads
[ 0.028000] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[ 0.028000] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.028000] Spectre V2 : Mitigation: Full generic retpoline
[ 0.028000] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[ 0.028000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.028000] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.028000] Speculative Store Bypass: Vulnerable
[ 0.036829] Freeing SMP alternatives memory: 36K
[ 0.037760] TSC deadline timer enabled
[ 0.037764] smpboot: CPU0: Intel(R) Pentium(R) CPU G4400 @ 3.30GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.037806] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.037827] ... version: 4
[ 0.037828] ... bit width: 48
[ 0.037828] ... generic registers: 8
[ 0.037829] ... value mask: 0000ffffffffffff
[ 0.037829] ... max period: 00007fffffffffff
[ 0.037830] ... fixed-purpose events: 3
[ 0.037830] ... event mask: 00000007000000ff
[ 0.037855] Hierarchical SRCU implementation.
[ 0.038450] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.038458] smp: Bringing up secondary CPUs ...
[ 0.038503] x86: Booting SMP configuration:
[ 0.038504] .... node #0, CPUs: #1
[ 0.040000] smp: Brought up 1 node, 2 CPUs
[ 0.040000] smpboot: Max logical packages: 1
[ 0.040000] smpboot: Total of 2 processors activated (13248.00 BogoMIPS)
[ 0.040000] devtmpfs: initialized
[ 0.040000] x86/mm: Memory block size: 128MB
[ 0.040000] evm: security.selinux
[ 0.040000] evm: security.SMACK64
[ 0.040000] evm: security.SMACK64EXEC
[ 0.040000] evm: security.SMACK64TRANSMUTE
[ 0.040000] evm: security.SMACK64MMAP
[ 0.040000] evm: security.apparmor
[ 0.040000] evm: security.ima
[ 0.040000] evm: security.capability
[ 0.040020] PM: Registering ACPI NVS region [mem 0xcf391000-0xcf391fff] (4096 bytes)
[ 0.040021] PM: Registering ACPI NVS region [mem 0xd696c000-0xd70a2fff] (7565312 bytes)
[ 0.040109] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.040109] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.040109] pinctrl core: initialized pinctrl subsystem
[ 0.040178] RTC time: 11:48:49, date: 08/15/18
[ 0.040242] NET: Registered protocol family 16
[ 0.040292] audit: initializing netlink subsys (disabled)
[ 0.040296] audit: type=2000 audit(1534333729.040:1): state=initialized audit_enabled=0 res=1
[ 0.040296] cpuidle: using governor ladder
[ 0.040296] cpuidle: using governor menu
[ 0.040296] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.040296] ACPI: bus type PCI registered
[ 0.040296] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.040296] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.040296] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.040296] PCI: Using configuration type 1 for base access
[ 0.040818] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.040818] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.040818] ACPI: Added _OSI(Module Device)
[ 0.040818] ACPI: Added _OSI(Processor Device)
[ 0.040818] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.040818] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.040818] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.040818] ACPI: Executed 25 blocks of module-level executable AML code
[ 0.055013] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.058178] ACPI: Dynamic OEM Table Load:
[ 0.058183] ACPI: SSDT 0xFFFF9A1994073000 0006A2 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.058459] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.059961] ACPI: Dynamic OEM Table Load:
[ 0.059964] ACPI: SSDT 0xFFFF9A199409D000 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.060816] ACPI: Dynamic OEM Table Load:
[ 0.060820] ACPI: SSDT 0xFFFF9A1994074000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.061437] ACPI: Dynamic OEM Table Load:
[ 0.061440] ACPI: SSDT 0xFFFF9A1994131000 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.063413] ACPI: Interpreter enabled
[ 0.063444] ACPI: (supports S0 S3 S4 S5)
[ 0.063445] ACPI: Using IOAPIC for interrupt routing
[ 0.063476] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.064359] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.066697] ACPI: Power Resource [PG00] (on)
[ 0.067086] ACPI: Power Resource [PG01] (on)
[ 0.067448] ACPI: Power Resource [PG02] (on)
[ 0.070131] ACPI: Power Resource [WRST] (on)
[ 0.070506] ACPI: Power Resource [WRST] (on)
[ 0.070880] ACPI: Power Resource [WRST] (on)
[ 0.071260] ACPI: Power Resource [WRST] (on)
[ 0.071639] ACPI: Power Resource [WRST] (on)
[ 0.072013] ACPI: Power Resource [WRST] (on)
[ 0.072387] ACPI: Power Resource [WRST] (on)
[ 0.072758] ACPI: Power Resource [WRST] (on)
[ 0.073132] ACPI: Power Resource [WRST] (on)
[ 0.073504] ACPI: Power Resource [WRST] (on)
[ 0.073875] ACPI: Power Resource [WRST] (on)
[ 0.074247] ACPI: Power Resource [WRST] (on)
[ 0.074625] ACPI: Power Resource [WRST] (on)
[ 0.074999] ACPI: Power Resource [WRST] (on)
[ 0.075376] ACPI: Power Resource [WRST] (on)
[ 0.075756] ACPI: Power Resource [WRST] (on)
[ 0.076133] ACPI: Power Resource [WRST] (on)
[ 0.076503] ACPI: Power Resource [WRST] (on)
[ 0.076879] ACPI: Power Resource [WRST] (on)
[ 0.077251] ACPI: Power Resource [WRST] (on)
[ 0.089130] ACPI: Power Resource [FN00] (off)
[ 0.089214] ACPI: Power Resource [FN01] (off)
[ 0.089297] ACPI: Power Resource [FN02] (off)
[ 0.089379] ACPI: Power Resource [FN03] (off)
[ 0.089461] ACPI: Power Resource [FN04] (off)
[ 0.090690] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.090695] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.090732] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.091448] PCI host bridge to bus 0000:00
[ 0.091449] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.091450] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.091451] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.091452] pci_bus 0000:00: root bus resource [mem 0xd8000000-0xf7ffffff window]
[ 0.091453] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.091455] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.091461] pci 0000:00:00.0: [8086:190f] type 00 class 0x060000
[ 0.091764] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.091797] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.092028] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.092049] pci 0000:00:14.0: reg 0x10: [mem 0xf7210000-0xf721ffff 64bit]
[ 0.092112] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.092319] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.092343] pci 0000:00:16.0: reg 0x10: [mem 0xf722d000-0xf722dfff 64bit]
[ 0.092410] pci 0000:00:16.0: PME# supported from D3hot
[ 0.092551] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 0.092567] pci 0000:00:17.0: reg 0x10: [mem 0xf7228000-0xf7229fff]
[ 0.092573] pci 0000:00:17.0: reg 0x14: [mem 0xf722c000-0xf722c0ff]
[ 0.092580] pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
[ 0.092587] pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
[ 0.092593] pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
[ 0.092600] pci 0000:00:17.0: reg 0x24: [mem 0xf722b000-0xf722b7ff]
[ 0.092636] pci 0000:00:17.0: PME# supported from D3hot
[ 0.092771] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
[ 0.092830] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.092999] pci 0000:00:1c.7: [8086:a117] type 01 class 0x060400
[ 0.093061] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.093217] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[ 0.093284] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.093458] pci 0000:00:1f.0: [8086:a143] type 00 class 0x060100
[ 0.093683] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.093697] pci 0000:00:1f.2: reg 0x10: [mem 0xf7224000-0xf7227fff]
[ 0.093871] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.093898] pci 0000:00:1f.3: reg 0x10: [mem 0xf7220000-0xf7223fff 64bit]
[ 0.093928] pci 0000:00:1f.3: reg 0x20: [mem 0xf7200000-0xf720ffff 64bit]
[ 0.093976] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.094157] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.094217] pci 0000:00:1f.4: reg 0x10: [mem 0xf722a000-0xf722a0ff 64bit]
[ 0.094285] pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
[ 0.094505] pci 0000:01:00.0: [10de:1287] type 00 class 0x030000
[ 0.094516] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.094523] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.094530] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.094535] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.094539] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.094603] pci 0000:01:00.1: [10de:0e0f] type 00 class 0x040300
[ 0.094612] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.104033] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.104040] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.104057] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.104060] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.104110] acpiphp: Slot [1] registered
[ 0.104113] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.104173] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.104202] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.104226] pci 0000:03:00.0: reg 0x18: [mem 0xf7104000-0xf7104fff 64bit]
[ 0.104242] pci 0000:03:00.0: reg 0x20: [mem 0xf7100000-0xf7103fff 64bit]
[ 0.104335] pci 0000:03:00.0: supports D1 D2
[ 0.104336] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.104417] pci 0000:00:1c.7: PCI bridge to [bus 03]
[ 0.104419] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff]
[ 0.104421] pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.104475] acpiphp: Slot [1-1] registered
[ 0.104478] pci 0000:00:1d.0: PCI bridge to [bus 04]
[ 0.106499] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.106554] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.106607] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.106661] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15)
[ 0.106713] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.106766] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.106819] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.106871] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.107499] SCSI subsystem initialized
[ 0.107519] libata version 3.00 loaded.
[ 0.107519] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.107519] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.107519] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.107519] vgaarb: loaded
[ 0.107519] ACPI: bus type USB registered
[ 0.107519] usbcore: registered new interface driver usbfs
[ 0.107519] usbcore: registered new interface driver hub
[ 0.107519] usbcore: registered new device driver usb
[ 0.107519] EDAC MC: Ver: 3.0.0
[ 0.107519] PCI: Using ACPI for IRQ routing
[ 0.114270] PCI: pci_cache_line_size set to 64 bytes
[ 0.114310] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[ 0.114311] e820: reserve RAM buffer [mem 0xcd850000-0xcfffffff]
[ 0.114312] e820: reserve RAM buffer [mem 0xcf391000-0xcfffffff]
[ 0.114312] e820: reserve RAM buffer [mem 0xd506b000-0xd7ffffff]
[ 0.114313] e820: reserve RAM buffer [mem 0xd696c000-0xd7ffffff]
[ 0.114314] e820: reserve RAM buffer [mem 0xd7c00000-0xd7ffffff]
[ 0.114315] e820: reserve RAM buffer [mem 0x427000000-0x427ffffff]
[ 0.114369] NetLabel: Initializing
[ 0.114369] NetLabel: domain hash size = 128
[ 0.114369] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.114379] NetLabel: unlabeled traffic allowed by default
[ 0.114388] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.114388] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.116014] clocksource: Switched to clocksource hpet
[ 0.122968] VFS: Disk quotas dquot_6.6.0
[ 0.122977] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.123038] AppArmor: AppArmor Filesystem Enabled
[ 0.123053] pnp: PnP ACPI init
[ 0.123264] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.123267] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.123586] pnp 00:01: [dma 0 disabled]
[ 0.123620] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.123686] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.123794] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.123902] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.123903] system 00:04: [io 0xffff] has been reserved
[ 0.123905] system 00:04: [io 0xffff] has been reserved
[ 0.123906] system 00:04: [io 0xffff] has been reserved
[ 0.123907] system 00:04: [io 0x1800-0x18fe] has been reserved
[ 0.123908] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.123910] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.123984] system 00:05: [io 0x0800-0x087f] has been reserved
[ 0.123986] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.123999] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.124050] system 00:07: [io 0x1854-0x1857] has been reserved
[ 0.124052] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.124308] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.124309] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.124311] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.124312] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.124313] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.124314] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.124315] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.124316] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.124317] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.124319] system 00:08: [mem 0xf7fc0000-0xf7fdffff] has been reserved
[ 0.124320] system 00:08: [mem 0xd7c00000-0xd7fffffe] has been reserved
[ 0.124322] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.124352] system 00:09: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.124353] system 00:09: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.124354] system 00:09: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.124355] system 00:09: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.124357] system 00:09: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.124358] system 00:09: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.124359] system 00:09: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.124361] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.124620] system 00:0a: [io 0xfe00-0xfefe] has been reserved
[ 0.124622] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.125724] system 00:0b: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.125725] system 00:0b: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.125726] system 00:0b: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.125729] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.126558] pnp: PnP ACPI: found 12 devices
[ 0.133758] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.133771] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.133773] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.133775] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 0.133786] pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.133788] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 0.133789] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[ 0.133793] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd8000000-0xd81fffff]
[ 0.133796] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd8200000-0xd83fffff 64bit pref]
[ 0.133798] pci 0000:00:1d.0: BAR 14: assigned [mem 0xd8400000-0xd85fffff]
[ 0.133800] pci 0000:00:1d.0: BAR 15: assigned [mem 0xd8600000-0xd87fffff 64bit pref]
[ 0.133801] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.133803] pci 0000:00:1d.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.133805] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.133806] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.133808] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.133810] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.133812] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.133814] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.133817] pci 0000:00:1c.0: bridge window [mem 0xd8000000-0xd81fffff]
[ 0.133819] pci 0000:00:1c.0: bridge window [mem 0xd8200000-0xd83fffff 64bit pref]
[ 0.133823] pci 0000:00:1c.7: PCI bridge to [bus 03]
[ 0.133824] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff]
[ 0.133827] pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.133832] pci 0000:00:1d.0: PCI bridge to [bus 04]
[ 0.133835] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff]
[ 0.133839] pci 0000:00:1d.0: bridge window [mem 0xd8400000-0xd85fffff]
[ 0.133841] pci 0000:00:1d.0: bridge window [mem 0xd8600000-0xd87fffff 64bit pref]
[ 0.133846] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.133847] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.133848] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.133849] pci_bus 0000:00: resource 7 [mem 0xd8000000-0xf7ffffff window]
[ 0.133850] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.133851] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.133852] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.133853] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.133854] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.133855] pci_bus 0000:02: resource 1 [mem 0xd8000000-0xd81fffff]
[ 0.133855] pci_bus 0000:02: resource 2 [mem 0xd8200000-0xd83fffff 64bit pref]
[ 0.133856] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.133857] pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.133858] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.133859] pci_bus 0000:04: resource 1 [mem 0xd8400000-0xd85fffff]
[ 0.133860] pci_bus 0000:04: resource 2 [mem 0xd8600000-0xd87fffff 64bit pref]
[ 0.133993] NET: Registered protocol family 2
[ 0.134109] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.134224] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.134292] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.134311] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.134337] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.134376] NET: Registered protocol family 1
[ 0.134979] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.134986] PCI: CLS 0 bytes, default 64
[ 0.135009] Unpacking initramfs...
[ 0.762528] Freeing initrd memory: 57012K
[ 0.762533] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.762535] software IO TLB [mem 0xd106b000-0xd506b000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 0.762662] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fbd93f9e57, max_idle_ns: 440795263784 ns
[ 0.762716] Scanning for low memory corruption every 60 seconds
[ 0.763183] Initialise system trusted keyrings
[ 0.763188] Key type blacklist registered
[ 0.763225] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.763925] zbud: loaded
[ 0.764292] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.764386] fuse init (API version 7.26)
[ 0.766558] Key type asymmetric registered
[ 0.766558] Asymmetric key parser 'x509' registered
[ 0.766580] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.766616] io scheduler noop registered
[ 0.766616] io scheduler deadline registered
[ 0.766642] io scheduler cfq registered (default)
[ 0.767170] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.767170] vesafb: scrolling: redraw
[ 0.767171] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.767177] vesafb: framebuffer at 0xf1000000, mapped to 0x (ptrval), using 1216k, total 1216k
[ 0.767244] Console: switching to colour frame buffer device 80x30
[ 0.767249] fb0: VESA VGA frame buffer device
[ 0.767258] intel_idle: MWAIT substates: 0x142120
[ 0.767258] intel_idle: v0.4.1 model 0x5E
[ 0.767323] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.767414] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.767423] ACPI: Sleep Button [SLPB]
[ 0.767443] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.767450] ACPI: Power Button [PWRB]
[ 0.767469] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.767517] ACPI: Power Button [PWRF]
[ 0.832616] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.892302] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.892303] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.892452] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.892452] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.892628] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.913487] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.916318] Linux agpgart interface v0.103
[ 0.917295] loop: module loaded
[ 0.917393] libphy: Fixed MDIO Bus: probed
[ 0.917394] tun: Universal TUN/TAP device driver, 1.6
[ 0.917434] PPP generic driver version 2.4.2
[ 0.917479] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.917480] ehci-pci: EHCI PCI platform driver
[ 0.917485] ehci-platform: EHCI generic platform driver
[ 0.917490] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.917491] ohci-pci: OHCI PCI platform driver
[ 0.917496] ohci-platform: OHCI generic platform driver
[ 0.917499] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.917611] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.917615] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.918701] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 0.918705] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.918824] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.918825] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.918826] usb usb1: Product: xHCI Host Controller
[ 0.918827] usb usb1: Manufacturer: Linux 4.15.0-32-generic xhci-hcd
[ 0.918828] usb usb1: SerialNumber: 0000:00:14.0
[ 0.918909] hub 1-0:1.0: USB hub found
[ 0.918921] hub 1-0:1.0: 10 ports detected
[ 0.919078] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.919080] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.919101] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.919102] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.919103] usb usb2: Product: xHCI Host Controller
[ 0.919104] usb usb2: Manufacturer: Linux 4.15.0-32-generic xhci-hcd
[ 0.919105] usb usb2: SerialNumber: 0000:00:14.0
[ 0.919209] hub 2-0:1.0: USB hub found
[ 0.919215] hub 2-0:1.0: 4 ports detected
[ 0.919456] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.922814] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.922817] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.922989] mousedev: PS/2 mouse device common for all mice
[ 0.923291] rtc_cmos 00:06: RTC can wake from S4
[ 0.923699] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.923778] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.923781] i2c /dev entries driver
[ 0.923812] device-mapper: uevent: version 1.0.3
[ 0.923872] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 0.923874] intel_pstate: Intel P-state driver initializing
[ 0.924020] intel_pstate: HWP enabled
[ 0.924057] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.924281] intel_pmc_core: initialized
[ 0.924412] NET: Registered protocol family 10
[ 0.927405] Segment Routing with IPv6
[ 0.927419] NET: Registered protocol family 17
[ 0.927478] Key type dns_resolver registered
[ 0.927640] RAS: Correctable Errors collector initialized.
[ 0.927659] microcode: sig=0x506e3, pf=0x2, revision=0xc2
[ 0.927713] microcode: Microcode Update Driver: v2.2.
[ 0.927719] sched_clock: Marking stable (927710867, 0)->(902234454, 25476413)
[ 0.927978] registered taskstats version 1
[ 0.927983] Loading compiled-in X.509 certificates
[ 0.929716] Loaded X.509 cert 'Build time autogenerated kernel key: cfed0c3f90bc86a77e51937f71922b89c4c6bbd5'
[ 0.929728] zswap: loaded using pool lzo/zbud
[ 0.932298] Key type big_key registered
[ 0.932300] Key type trusted registered
[ 0.933480] Key type encrypted registered
[ 0.933482] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.933484] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 0.933495] evm: HMAC attrs: 0x1
[ 0.934313] Magic number: 14:93:833
[ 0.934493] rtc_cmos 00:06: setting system clock to 2018-08-15 11:48:50 UTC (1534333730)
[ 0.934540] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.934541] EDD information not available.
[ 1.368198] Freeing unused kernel memory: 2408K
[ 1.376493] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.388103] Write protecting the kernel read-only data: 20480k
[ 1.389224] Freeing unused kernel memory: 2008K
[ 1.391774] Freeing unused kernel memory: 1900K
[ 1.396206] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.396206] x86/mm: Checking user space page tables
[ 1.400514] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.493235] ahci 0000:00:17.0: version 3.0
[ 1.494356] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.494361] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.503480] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.503483] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 1.505301] r8169 0000:03:00.0 eth0: RTL8168h/8111h at 0x (ptrval), 70:8b:cd:9e:60:77, XID 14100800 IRQ 122
[ 1.505303] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.511788] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 1.536423] scsi host0: ahci
[ 1.536485] scsi host1: ahci
[ 1.536536] scsi host2: ahci
[ 1.536586] scsi host3: ahci
[ 1.536611] ata1: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b100 irq 121
[ 1.536615] ata2: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b180 irq 121
[ 1.536620] ata3: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b200 irq 121
[ 1.536624] ata4: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b280 irq 121
[ 1.600102] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 1.748828] usb 1-3: New USB device found, idVendor=03f0, idProduct=a011
[ 1.748830] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.748831] usb 1-3: Product: Deskjet 3050A J611 series
[ 1.748832] usb 1-3: Manufacturer: HP
[ 1.748832] usb 1-3: SerialNumber: CN24B536F505PJ
[ 1.788317] clocksource: Switched to clocksource tsc
[ 1.851659] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.851676] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.851690] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.851704] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.852845] ata3.00: ATA-8: ST1000DM003-1SB102, CC43, max UDMA/133
[ 1.852847] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.854030] ata3.00: configured for UDMA/133
[ 1.854077] ata2.00: ATAPI: TSSTcorp CDDVDW SH-224FB, SB00, max UDMA/100
[ 1.855072] ata2.00: configured for UDMA/100
[ 1.856584] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224FB SB00 PQ: 0 ANSI: 5
[ 1.865620] ata4.00: ATA-8: KINGSTON SV300S37A240G, 605ABBF2, max UDMA/133
[ 1.865622] ata4.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.871389] ata4.00: configured for UDMA/133
[ 1.876079] usb 1-7: new high-speed USB device number 3 using xhci_hcd
[ 1.924114] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.924128] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.924207] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.924238] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.924485] scsi 2:0:0:0: Direct-Access ATA ST1000DM003-1SB1 CC43 PQ: 0 ANSI: 5
[ 1.924772] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.924774] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 1.924779] sd 2:0:0:0: [sda] Write Protect is off
[ 1.924780] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.924787] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.924887] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.924966] scsi 3:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF2 PQ: 0 ANSI: 5
[ 1.925065] sd 3:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 1.925066] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.925075] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.925076] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.925084] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.927627] sdb: sdb1 sdb2 sdb3
[ 1.927768] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.932584] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.028066] usb 1-7: New USB device found, idVendor=1bcf, idProduct=0c31
[ 2.028067] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.028069] usb 1-7: Product: USB to Serial-ATA bridge
[ 2.028070] usb 1-7: Manufacturer: Sunplus Innovation Technology
[ 2.028070] usb 1-7: SerialNumber: FDC0FD500000000FD0FCAFF0247716
[ 2.042051] random: fast init done
[ 2.081525] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.081536] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.081541] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.146904] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.146916] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.146978] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.147909] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.147939] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.147996] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.148020] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.160086] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[ 2.314084] usb 1-8: New USB device found, idVendor=3938, idProduct=1031
[ 2.314085] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.314086] usb 1-8: Product: 2.4G Wireless Mouse
[ 2.314087] usb 1-8: Manufacturer: MOSART Semi.
[ 2.440079] usb 1-9: new high-speed USB device number 5 using xhci_hcd
[ 2.591731] usb 1-9: New USB device found, idVendor=05e3, idProduct=0716
[ 2.591732] usb 1-9: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 2.591733] usb 1-9: Product: USB Storage
[ 2.591734] usb 1-9: SerialNumber: 000000009744
[ 2.595292] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.597485] usb-storage 1-7:1.0: USB Mass Storage device detected
[ 2.597929] scsi host4: usb-storage 1-7:1.0
[ 2.597974] usb-storage 1-9:1.0: USB Mass Storage device detected
[ 2.598112] scsi host5: usb-storage 1-9:1.0
[ 2.598146] usbcore: registered new interface driver usb-storage
[ 2.598879] usbcore: registered new interface driver uas
[ 2.599070] usbcore: registered new interface driver usbhid
[ 2.599071] usbhid: USB HID core driver
[ 2.600277] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:3938:1031.0001/input/input6
[ 2.600694] hid-generic 0003:3938:1031.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [MOSART Semi. 2.4G Wireless Mouse] on usb-0000:00:14.0-8/input0
[ 3.395859] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 3.613288] scsi 5:0:0:0: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
[ 3.613968] scsi 5:0:0:1: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
[ 3.614637] scsi 5:0:0:2: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
[ 3.615370] scsi 5:0:0:3: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
[ 3.615902] scsi 4:0:0:0: Direct-Access WDC WD50 00AAKS-00TMA0 0200 PQ: 0 ANSI: 4
[ 3.616009] scsi 5:0:0:4: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
[ 3.616089] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 3.616719] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 3.617022] sd 5:0:0:0: [sdd] Attached SCSI removable disk
[ 3.617024] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 3.617116] sd 5:0:0:1: Attached scsi generic sg5 type 0
[ 3.617186] sd 5:0:0:2: Attached scsi generic sg6 type 0
[ 3.617252] sd 5:0:0:3: Attached scsi generic sg7 type 0
[ 3.617315] sd 5:0:0:4: Attached scsi generic sg8 type 0
[ 3.621242] sd 5:0:0:2: [sdf] Attached SCSI removable disk
[ 3.621637] sd 5:0:0:3: [sdg] Attached SCSI removable disk
[ 3.623471] sd 4:0:0:0: [sdc] Write Protect is off
[ 3.623473] sd 4:0:0:0: [sdc] Mode Sense: 38 00 00 00
[ 3.630216] sd 4:0:0:0: [sdc] No Caching mode page found
[ 3.630219] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 3.642162] sd 5:0:0:1: [sde] Attached SCSI removable disk
[ 3.644439] sd 5:0:0:4: [sdh] Attached SCSI removable disk
[ 8.622374] sdc: sdc1 < sdc5 >
[ 8.645055] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 9.008031] raid6: sse2x1 gen() 11789 MB/s
[ 9.056030] raid6: sse2x1 xor() 8618 MB/s
[ 9.104030] raid6: sse2x2 gen() 14806 MB/s
[ 9.152002] raid6: sse2x2 xor() 9969 MB/s
[ 9.200029] raid6: sse2x4 gen() 17224 MB/s
[ 9.248027] raid6: sse2x4 xor() 10601 MB/s
[ 9.248028] raid6: using algorithm sse2x4 gen() 17224 MB/s
[ 9.248028] raid6: .... xor() 10601 MB/s, rmw enabled
[ 9.248029] raid6: using ssse3x2 recovery algorithm
[ 9.250014] xor: measuring software checksum speed
[ 9.288028] prefetch64-sse: 17883.000 MB/sec
[ 9.328027] generic_sse: 16730.000 MB/sec
[ 9.328028] xor: using function: prefetch64-sse (17883.000 MB/sec)
[ 9.339344] Btrfs loaded, crc32c=crc32c-intel
[ 41.534471] random: crng init done
[ 46.798690] EXT4-fs (sdb1): INFO: recovery required on readonly filesystem
[ 46.798691] EXT4-fs (sdb1): write access will be enabled during recovery
[ 46.869940] EXT4-fs (sdb1): recovery complete
[ 46.870133] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 46.980007] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 46.985140] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 47.004149] systemd[1]: Detected architecture x86-64.
[ 47.006040] systemd[1]: Set hostname to <patrice-linuxmint>.
[ 47.067570] systemd[1]: Configuration file /etc/systemd/system/openvpnas.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[ 47.082147] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 47.082264] systemd[1]: Created slice User and Session Slice.
[ 47.082417] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 47.082433] systemd[1]: Reached target Remote File Systems.
[ 47.082443] systemd[1]: Reached target User and Group Name Lookups.
[ 47.082523] systemd[1]: Created slice System Slice.
[ 47.118550] lp: driver loaded but no devices found
[ 47.135582] ppdev: user-space parallel port driver
[ 47.151491] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 47.190779] systemd-journald[414]: Received request to flush runtime journal from PID 1
[ 47.199694] systemd-journald[414]: File /var/log/journal/4095cb9d62054733b651d895c996ea84/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 47.405266] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 47.414947] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 47.427244] ipmi message handler version 39.2
[ 47.429587] ipmi device interface
[ 47.512879] nvidia: loading out-of-tree module taints kernel.
[ 47.512884] nvidia: module license 'NVIDIA' taints kernel.
[ 47.512885] Disabling lock debugging due to kernel taint
[ 47.515805] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 47.525466] nvidia-nvlink: Nvlink Core is being initialized, major device number 240
[ 47.525739] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 47.525980] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.48 Thu Mar 22 00:42:57 PDT 2018 (using threaded interrupts)
[ 47.538608] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.48 Wed Mar 21 23:48:34 PDT 2018
[ 47.545796] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 47.545798] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 47.578632] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 47.578633] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 47.578634] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 47.578634] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 47.578634] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 47.578635] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 47.583839] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 47.583842] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 47.601103] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 47.601105] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 47.601106] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 47.601107] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 47.601108] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
[ 47.601108] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 47.601109] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 47.601111] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 47.601111] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 47.610444] SSE version of gcm_enc/dec engaged.
[ 47.615019] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[ 47.615130] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[ 47.615182] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 47.615245] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 47.615275] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 48.209086] asus_wmi: ASUS WMI generic driver loaded
[ 48.211498] asus_wmi: Initialization: 0x0
[ 48.211524] asus_wmi: BIOS WMI version: 0.9
[ 48.211613] asus_wmi: SFUN value: 0x0
[ 48.211971] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input12
[ 48.212806] asus_wmi: Number of fans: 1
[ 48.272638] intel_rapl: Found RAPL domain package
[ 48.272639] intel_rapl: Found RAPL domain core
[ 48.272640] intel_rapl: Found RAPL domain dram
[ 48.305721] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 239
[ 48.580291] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 48.580322] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 48.652344] usblp 1-3:1.1: usblp1: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0xA011
[ 48.652398] usbcore: registered new interface driver usblp
[ 48.952885] NVRM: Your system is not currently configured to drive a VGA console
on the primary VGA device. The NVIDIA Linux graphics driver
requires the use of a text-mode VGA console. Use of other console
drivers including, but not limited to, vesafb, may result in
corruption and stability problems, and is not supported.
[ 57.120793] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: (null)
[ 57.166123] audit: type=1400 audit(1534333786.725:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=866 comm="apparmor_parser"
[ 57.166126] audit: type=1400 audit(1534333786.725:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=866 comm="apparmor_parser"
[ 57.166127] audit: type=1400 audit(1534333786.725:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=866 comm="apparmor_parser"
[ 57.166128] audit: type=1400 audit(1534333786.725:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=866 comm="apparmor_parser"
[ 57.166316] audit: type=1400 audit(1534333786.725:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=865 comm="apparmor_parser"
[ 57.166317] audit: type=1400 audit(1534333786.725:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=865 comm="apparmor_parser"
[ 57.167348] audit: type=1400 audit(1534333786.725:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=868 comm="apparmor_parser"
[ 57.167350] audit: type=1400 audit(1534333786.725:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=868 comm="apparmor_parser"
[ 57.167351] audit: type=1400 audit(1534333786.725:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=868 comm="apparmor_parser"
[ 57.167445] audit: type=1400 audit(1534333786.725:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=869 comm="apparmor_parser"
[ 137.630374] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 137.650798] r8169 0000:03:00.0 enp3s0: link down
[ 137.650858] r8169 0000:03:00.0 enp3s0: link down
[ 137.650947] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 138.166439] nvidia-modeset: Allocated GPU:0 (GPU-5f947f73-1b4e-8f27-20fb-c8f34f2721be) @ PCI:0000:01:00.0
[ 141.262150] r8169 0000:03:00.0 enp3s0: link up
[ 141.262155] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 142.509021] usblp1: removed
[ 142.512858] usblp 1-3:1.1: usblp1: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0xA011
[ 143.856686] vboxdrv: Found 2 processor cores
[ 143.876109] vboxdrv: TSC mode is Invariant, tentative frequency 3312000052 Hz
[ 143.876110] vboxdrv: Successfully loaded version 5.2.10_Ubuntu (interface 0x00290001)
[ 143.880682] VBoxNetFlt: Successfully started.
[ 143.884316] VBoxNetAdp: Successfully started.
[ 143.897452] VBoxPciLinuxInit
[ 143.902003] vboxpci: IOMMU not found (not registered)
[ 5963.287944] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device ViewSonic VX2460 SERIES (HDMI-0)
[ 6127.887817] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device ViewSonic VX2460 SERIES (HDMI-0)
Evidemment j'ai été sur le site du fabriquant je leur ai fourni le tiquet de caisse etc.. Afin de lancer le service de garantie étant donné que la liseuse a été acheté il y a un mois et demi.
Pas de réponse.......
Je n'ai aucune possibilité de transférer mes EBOOK sur la liseuse puisqu'elle n'est pas reconnue ! ! ! !
C'est très très énervant :lol: :lol: :lol: :mad: :mad:
Merci pour votre aide. 🙂 😐
