Bonjour 🙂
je possède un WD Caviar Green et j'aimerais l'utiliser sous GNU/Linux. Seulement je n'y connais rien en données SMART (c'esrt encore une langue étrangère pour moi :/ ) et je me souvenais de l'existence de ce long fil au titre inquiétant sur les WD Caviar Green :
https://forum.ubuntu-fr.org/viewtopic.php?id=403064
Voici les données SMART de mon HDD :
sudo smartctl -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-3-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green
Device Model: WDC WD10EADS-65M2B0
Serial Number: WD-WCAV52170658
LU WWN Device Id: 5 0014ee 2ae12baa6
Firmware Version: 01.00A01
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Fri Sep 21 09:02:00 2018 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (20400) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 235) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 114 106 021 Pre-fail Always - 7266
4 Start_Stop_Count 0x0032 094 094 000 Old_age Always - 6941
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5157
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 094 094 000 Old_age Always - 6918
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 614
193 Load_Cycle_Count 0x0032 137 137 000 Old_age Always - 191796
194 Temperature_Celsius 0x0022 122 110 000 Old_age Always - 25
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 5018 -
# 2 Short offline Completed without error 00% 5018 -
# 3 Short offline Completed without error 00% 5018 -
# 4 Short offline Completed without error 00% 5018 -
# 5 Short offline Completed without error 00% 5017 -
# 6 Short offline Completed without error 00% 4503 -
# 7 Short offline Completed without error 00% 4358 -
# 8 Short offline Aborted by host 10% 4098 -
# 9 Short offline Completed without error 00% 3664 -
#10 Short offline Completed without error 00% 3552 -
#11 Short offline Completed without error 00% 3256 -
#12 Short offline Completed without error 00% 2874 -
#13 Short offline Completed without error 00% 2331 -
#14 Short offline Completed without error 00% 2157 -
#15 Short offline Completed without error 00% 1865 -
#16 Short offline Completed without error 00% 1730 -
#17 Short offline Completed without error 00% 1613 -
#18 Short offline Completed without error 00% 1013 -
#19 Short offline Completed without error 00% 820 -
#20 Short offline Completed without error 00% 1 -
#21 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Sinon, j'ai d'autres disques de substitition :
- Un Seagate Barracuda de 500 Go :
humain@debian:~$ sudo smartctl -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-3-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.12
Device Model: ST3500413AS
Serial Number: Z2A9R3MJ
LU WWN Device Id: 5 000c50 035c90dd7
Firmware Version: JC47
User Capacity: 500 107 862 016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Sep 21 16:30:50 2018 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 609) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 85) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 118 099 006 Pre-fail Always - 189559884
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3698
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 331991728
9 Power_On_Hours 0x0032 077 077 000 Old_age Always - 20913
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always - 3698
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 4295032834
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 073 056 045 Old_age Always - 27 (Min/Max 19/27)
194 Temperature_Celsius 0x0022 027 044 000 Old_age Always - 27 (0 7 0 0 0)
195 Hardware_ECC_Recovered 0x001a 049 029 000 Old_age Always - 189559884
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 30845 (105 207 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3856757351
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1515250158
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 20900 -
# 2 Short offline Completed without error 00% 19246 -
# 3 Short offline Completed without error 00% 18515 -
# 4 Short offline Completed without error 00% 17795 -
# 5 Short offline Completed without error 00% 17051 -
# 6 Short offline Completed without error 00% 16379 -
# 7 Short offline Completed without error 00% 15635 -
# 8 Short offline Completed without error 00% 14891 -
# 9 Short offline Completed without error 00% 14171 -
#10 Short offline Completed without error 00% 13426 -
#11 Short offline Completed without error 00% 12706 -
#12 Short offline Completed without error 00% 11962 -
#13 Short offline Completed without error 00% 11218 -
#14 Short offline Completed without error 00% 10498 -
#15 Short offline Completed without error 00% 9776 -
#16 Short offline Completed without error 00% 9056 -
#17 Short offline Completed without error 00% 8314 -
#18 Short offline Completed without error 00% 7656 -
#19 Short offline Completed without error 00% 6928 -
#20 Short offline Completed without error 00% 5480 -
#21 Short offline Completed without error 00% 4735 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
humain@debian:~$
- Un Maxtor de 80 Go :
sudo smartctl -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-3-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Maxtor DiamondMax Plus 9
Device Model: Maxtor 6Y080M0
Serial Number: Y236RLEC
Firmware Version: YAR511W0
User Capacity: 80 032 038 912 bytes [80,0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 T13/1532D revision 0
Local Time is: Fri Sep 21 17:06:01 2018 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 241) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 36) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 226 225 063 Pre-fail Always - 9413
4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 83
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 0
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0
8 Seek_Time_Performance 0x0027 249 245 187 Pre-fail Always - 44168
9 Power_On_Minutes 0x0032 241 241 000 Old_age Always - 68h+57m
10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 253 253 000 Old_age Always - 118
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0
194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 21
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 1604
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 1
202 Data_Address_Mark_Errs 0x000a 253 252 000 Old_age Always - 0
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 5
204 Soft_ECC_Correction 0x000a 253 252 000 Old_age Always - 0
205 Thermal_Asperity_Rate 0x000a 253 252 000 Old_age Always - 0
207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0
208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0
209 Offline_Seek_Performnce 0x0024 191 191 000 Old_age Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
SMART Error Log Version: 1
Warning: ATA error count 11956 inconsistent with error log pointer 5
ATA Error Count: 11956 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 11956 occurred at disk power-on lifetime: 4133 hours (172 days + 5 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 00 f6 00 00 a0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
70 ff 00 f6 00 00 a0 00 24d+11:43:36.736 SEEK [OBS-7]
c5 ff 01 f6 60 0e e0 00 24d+11:43:36.736 WRITE MULTIPLE
c5 ff 01 f5 60 0e e0 00 24d+11:43:36.736 WRITE MULTIPLE
c5 ff 01 0c 8f 0e e0 00 24d+11:43:36.736 WRITE MULTIPLE
c5 ff 04 5a 83 79 e0 00 24d+11:43:36.736 WRITE MULTIPLE
Error 11955 occurred at disk power-on lifetime: 4133 hours (172 days + 5 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 00 8e 00 00 a0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
70 ff 00 8e 00 00 a0 00 24d+11:43:36.672 SEEK [OBS-7]
c4 ff 08 8e 3d 11 e0 00 24d+11:43:36.672 READ MULTIPLE
c5 ff 01 d3 44 0c e0 00 24d+11:43:36.672 WRITE MULTIPLE
c5 ff 01 d3 44 0c e0 00 24d+11:43:36.672 WRITE MULTIPLE
c5 ff 01 33 62 11 e0 00 24d+11:43:36.672 WRITE MULTIPLE
Error 11954 occurred at disk power-on lifetime: 4111 hours (171 days + 7 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 00 f6 00 00 a0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
70 ff 00 f6 00 00 a0 00 23d+09:10:16.000 SEEK [OBS-7]
c5 ff 01 f6 60 0e e0 00 23d+09:10:16.000 WRITE MULTIPLE
c5 ff 01 f5 60 0e e0 00 23d+09:10:16.000 WRITE MULTIPLE
c5 ff 01 0c 8f 0e e0 00 23d+09:10:16.000 WRITE MULTIPLE
c5 ff 01 18 c1 0e e0 00 23d+09:10:16.000 WRITE MULTIPLE
Error 11953 occurred at disk power-on lifetime: 4111 hours (171 days + 7 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 00 49 00 00 a0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
70 ff 00 49 00 00 a0 00 23d+09:10:15.936 SEEK [OBS-7]
c5 ff 04 46 04 11 e0 00 23d+09:10:15.936 WRITE MULTIPLE
c5 ff 04 ae 41 18 e0 00 23d+09:10:15.936 WRITE MULTIPLE
c5 ff 04 46 04 11 e0 00 23d+09:10:15.936 WRITE MULTIPLE
c5 ff 02 eb 82 79 e0 00 23d+09:10:15.936 WRITE MULTIPLE
Error 11952 occurred at disk power-on lifetime: 4111 hours (171 days + 7 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 00 8e 00 00 a0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
70 ff 00 8e 00 00 a0 00 23d+09:10:15.152 SEEK [OBS-7]
c4 ff 08 8e 3d 11 e0 00 23d+09:10:15.152 READ MULTIPLE
c5 ff 01 33 62 11 e0 00 23d+09:10:15.136 WRITE MULTIPLE
c5 ff 01 33 62 11 e0 00 23d+09:10:15.136 WRITE MULTIPLE
c5 ff 01 d3 44 0c e0 00 23d+09:10:15.136 WRITE MULTIPLE
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
- Un WD Blue de 1 To :
sudo smartctl -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-3-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue
Device Model: WDC WD10EZEX-08M2NA0
Serial Number: WD-WCC3F3584219
LU WWN Device Id: 5 0014ee 20a012fa3
Firmware Version: 01.01A01
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Sep 21 17:09:34 2018 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (11760) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 122) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 187 183 051 Pre-fail Always - 48486
3 Spin_Up_Time 0x0027 173 169 021 Pre-fail Always - 2350
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 426
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1238
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 420
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 168
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 264
194 Temperature_Celsius 0x0022 121 108 000 Old_age Always - 22
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 91
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 42
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1
SMART Error Log Version: 1
ATA Error Count: 792 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 792 occurred at disk power-on lifetime: 1235 hours (51 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a8 11 44 e6 Error: UNC 8 sectors at LBA = 0x064411a8 = 105124264
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 a8 11 44 e6 00 12:13:43.392 READ DMA
ec 00 00 00 00 00 a0 02 12:13:43.378 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 02 12:13:43.378 SET FEATURES [Set transfer mode]
Error 791 occurred at disk power-on lifetime: 1235 hours (51 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a8 11 44 e6 Error: UNC 8 sectors at LBA = 0x064411a8 = 105124264
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 a8 11 44 e6 00 12:13:39.426 READ DMA
ec 00 00 00 00 00 a0 02 12:13:39.412 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 02 12:13:39.392 SET FEATURES [Set transfer mode]
Error 790 occurred at disk power-on lifetime: 1235 hours (51 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a8 11 44 e6 Error: UNC 8 sectors at LBA = 0x064411a8 = 105124264
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 a8 11 44 e6 00 12:13:35.428 READ DMA
ec 00 00 00 00 00 a0 02 12:13:35.416 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 02 12:13:35.396 SET FEATURES [Set transfer mode]
Error 789 occurred at disk power-on lifetime: 1235 hours (51 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a8 11 44 e6 Error: UNC 8 sectors at LBA = 0x064411a8 = 105124264
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 a8 11 44 e6 00 12:13:31.436 READ DMA
ec 00 00 00 00 00 a0 02 12:13:31.422 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 02 12:13:31.422 SET FEATURES [Set transfer mode]
Error 788 occurred at disk power-on lifetime: 1235 hours (51 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a8 11 44 e6 Error: UNC 8 sectors at LBA = 0x064411a8 = 105124264
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 a8 11 44 e6 00 12:13:27.472 READ DMA
ec 00 00 00 00 00 a0 02 12:13:27.458 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 02 12:13:27.458 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1213 -
# 2 Short offline Completed: read failure 90% 1157 275236
# 3 Short offline Completed: read failure 90% 1157 275236
# 4 Extended offline Completed: read failure 40% 1155 275232
# 5 Extended offline Aborted by host 90% 1154 -
# 6 Short offline Completed: read failure 90% 1154 9652224
# 7 Extended offline Completed: read failure 90% 1139 346112
# 8 Short offline Completed: read failure 90% 1139 346112
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
- Et un hitachi de 1 To :
sudo smartctl -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-3-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K1000.C
Device Model: Hitachi HDS721010CLA630
Serial Number: JP2940N03N9JGV
LU WWN Device Id: 5 000cca 39af381b6
Firmware Version: JP4OA41A
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Sep 21 17:12:22 2018 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 9929) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 166) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 079 016 Pre-fail Always - 0
2 Throughput_Performance 0x0027 136 100 054 Pre-fail Always - 93
3 Spin_Up_Time 0x0023 127 100 024 Pre-fail Always - 307 (Average 291)
4 Start_Stop_Count 0x0022 099 099 000 Old_age Always - 4520
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 5 (0 5)
7 Seek_Error_Rate 0x002f 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 138 100 020 Pre-fail Offline - 31
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 12654
10 Spin_Retry_Count 0x0033 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 4514
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
185 Unknown_Attribute 0x0032 095 095 000 Old_age Always - 393215
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 014 000 Old_age Always - 2235343
189 High_Fly_Writes 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 079 047 000 Old_age Always - 21 (Min/Max 21/21)
192 Power-Off_Retract_Count 0x0032 097 097 000 Old_age Always - 4520
193 Load_Cycle_Count 0x0032 097 097 000 Old_age Always - 4520
194 Temperature_Celsius 0x0002 253 115 000 Old_age Always - 21 (Min/Max 14/53)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 5
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
SMART Error Log Version: 0
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 11638 -
# 2 Short offline Completed without error 00% 11594 -
# 3 Short offline Completed without error 00% 11575 -
# 4 Short offline Completed without error 00% 11560 -
# 5 Short offline Completed without error 00% 11525 -
# 6 Short offline Completed without error 00% 11504 -
# 7 Short offline Completed without error 00% 11475 -
# 8 Short offline Completed without error 00% 11442 -
# 9 Short offline Completed without error 00% 11426 -
#10 Short offline Completed without error 00% 11395 -
#11 Short offline Completed without error 00% 11365 -
#12 Short offline Completed without error 00% 11346 -
#13 Short offline Completed without error 00% 11317 -
#14 Short offline Completed without error 00% 11285 -
#15 Short offline Completed without error 00% 11249 -
#16 Extended offline Interrupted (host reset) 90% 2 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Concrètement, que puis-je tirer de chacun de ces disques ? (Installation d'un OS ? Usage comme disque de stockage uniquement ? Poubelle ? Autre chose ?)
Merci à vous 🙂 Ce fil va être l'occasion de me former à la lecture des données SMART et faire du tri dans mes disques durs ! 😃
D'avance merci 😃
