Bonjour toul'monde,
J'ai trouvé ce post
ici et n'ayant reçu aucune réponse à mon message ci-dessus, je me permets de vous poster le retour de la commande indiquée :
poun@Gigapoun:~$ dmesg | tail -1 > tail.txt ; sleep 45 && echo ; mount -l | tail -1 ; echo ; lsusb ; echo ; lsusb -t ; echo ; dmesg | grep -A1000 "$(sed -r 's/([].[])/\\\1/g' tail.txt)" | grep -Evi "80211|associate|authenticat|dhclient|dhcp|ipv6|network|phy0|tx status|ufw|wlan"; echo; ls -la /media ; echo ; ls -la /media/$USER; echo
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 006: ID 046d:08ca Logitech, Inc. Mic (Fusion)
Bus 001 Device 005: ID 03f0:062a Hewlett-Packard
Bus 001 Device 004: ID 046d:c050 Logitech, Inc. RX 250 Optical Mouse
Bus 001 Device 003: ID 15a9:0004 Gemtek WUBR-177G [Ralink RT2571W]
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 0e8d:201d MediaTek Inc.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M
|__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=, 480M
|__ Port 1: Dev 2, If 1, Class=Vendor Specific Class, Driver=, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
|__ Port 2: Dev 3, If 0, Class=Vendor Specific Class, Driver=rt73usb, 480M
|__ Port 3: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 4: Dev 5, If 1, Class=Printer, Driver=usblp, 480M
|__ Port 4: Dev 5, If 2, Class=Vendor Specific Class, Driver=, 480M
|__ Port 4: Dev 5, If 0, Class=Vendor Specific Class, Driver=, 480M
|__ Port 6: Dev 6, If 2, Class=Audio, Driver=snd-usb-audio, 480M
|__ Port 6: Dev 6, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 6: Dev 6, If 3, Class=Audio, Driver=snd-usb-audio, 480M
|__ Port 6: Dev 6, If 1, Class=Video, Driver=uvcvideo, 480M
[ 128.368220] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 128.517038] usb 3-1: New USB device found, idVendor=0e8d, idProduct=201d
[ 128.517042] usb 3-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 128.517044] usb 3-1: Product: U FEEL
[ 128.517046] usb 3-1: Manufacturer: WIKO
[ 128.517048] usb 3-1: SerialNumber: AIAYH6T8SWRGFE4L
total 12
drwxr-xr-x 3 root root 4096 sept. 2 16:18 .
drwxr-xr-x 24 root root 4096 oct. 3 14:10 ..
drwxr-x---+ 2 root root 4096 oct. 13 04:14 poun
total 8
drwxr-x---+ 2 root root 4096 oct. 13 04:14 .
drwxr-xr-x 3 root root 4096 sept. 2 16:18 ..
poun@Gigapoun:~$
Peut-être que ça peut inspirer quelqu'un...
Mon espoir est de monter la mémoire de ce téléphone Wiko comme une clé USB et de pouvoir récupérer les fichiers effacés avec "Photorec".
Merci beaucoup pour votre aide 🙂
