Ce site est optimisé pour être consulté depuis un navigateur moderne dans lequel JavaScript est activé.

Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

Nuliel

Tu peux donner le fichier de conf de hostapd?
(et je sais pas s'il faut aussi configurer un serveur dhcp et compagnie)

[supprimé]

Le mode est supporté ... :/

lubuntu@lubuntu-HP-Pavilion-dv7-Notebook-PC:~$ lspci | grep -i Network
02:00.0 Network controller: Broadcom Limited BCM43225 802.11b/g/n (rev 01)
lubuntu@lubuntu-HP-Pavilion-dv7-Notebook-PC:~$

C'est fou ...

[supprimé]

Le fichier modifié également ce matin pour test a échoué

connection]
id=L&S_WIFI
uuid=5c24f176-bb6e-41fc-b9e8-13d8ea965ca6
type=wifi
interface-name=wlp2s0b1
permissions=
timestamp=1543001774

[wifi]
mac-address=78:E4:00:7C:53:0F
mac-address-blacklist=
mode=ap
seen-bssids=78:E4:00:7C:53:0F;
ssid=L&S_WIFI

[wifi-security]
key-mgmt=wpa-psk
psk=

[supprimé]

Aie ... Désinstallé .. je réinstalle ça et je te dis ...mais plut tard dans la soirée ok ?
Merci 🙂

xubu1957

Vu :

Broadcom Limited BCM43225

C'est un chipset sdio ?

On vient à peine d'en faire fonctionner un,sur un noyau 4.18.

[supprimé]

Euh .. c'est vrai que j'avais galéré pour l'installation mais de là à dire que c'est un chipset sdio n'allons pas trop loin quand même ! 🙂
En fait je ne sais pas 🙂

xubu1957

Le 21/11/2018, moko138 a écritMontre :

dmesg | grep -EiC2 "brcm|sdio|sdhci"

Nuliel

sdio c'est une sorte de port sd amélioré. Habituellement la carte wifi est sur un port pci, mais sur des petits pc il y a ce genre de connectique (sûrement pour éviter des coûts supplémentaires sur la carte mère)
Tu peux tenter de suivre http://ubuntuhandbook.org/index.php/2014/09/3-ways-create-wifi-hotspot-ubuntu/ (3eme méthode)

[supprimé]

Instant de lecture pour les passionnés 🙂 xubu1957 Merci Naziel pour le lien j'y vais de ce doigt 🙂

lubuntu@lubuntu-HP-Pavilion-dv7-Notebook-PC:~$ dmesg | grep -EiC2 "brcm|sdio|sdhci"
[    1.104195] acpi device:10: registered as cooling_device4
[    1.104260] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/LNXVIDEO:02/input/input6
[    1.110698] sdhci: Secure Digital Host Controller Interface driver
[    1.110699] sdhci: Copyright(c) Pierre Ossman
[    1.115156] sdhci-pci 0000:04:00.1: SDHCI controller found [197b:2382] (rev 0)
[    1.115377] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[    1.118400] ahci 0000:00:1f.2: version 3.0
--
[    1.118762] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.118776] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.123772] mmc0: SDHCI controller on PCI [0000:04:00.1] using DMA
[    1.123812] sdhci-pci 0000:04:00.2: SDHCI controller found [197b:2381] (rev 0)
[    1.127406] bcma: bus0: Found chip with id 43225, rev 0x01 and package 0x0A
[    1.127440] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[    1.127467] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[    1.127517] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[    1.132042] sdhci-pci 0000:04:00.2: Refusing to bind to secondary interface.
[    1.132235] firewire_ohci 0000:04:00.0: overriding IsoXmitIntMask
[    1.132569] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0x        (ptrval), c8:0a:a9:c1:af:71, XID 083000c0 IRQ 25
--
[    2.934486] snd_hda_codec_idt hdaudioC0D0:      Mic=0xb
[    2.944242] uvcvideo: Found UVC 1.00 device HP Webcam (064e:c107)
[    2.944389] brcmsmac bcma0:1: mfg 4bf core 812 rev 23 class 0 irq 16
[    2.945202] clocksource: Switched to clocksource tsc
[    2.961339] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
--
[    2.974824] uvcvideo 2-1.5:1.0: Entity type for entity Camera 1 was not initialized!
[    2.978917] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    2.979302] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 497
[    2.982230] input: HP Webcam: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input14
[    2.998217] usbcore: registered new interface driver uvcvideo
--
[    3.037409] kvm: disabled by bios
[    3.065545] kvm: disabled by bios
[    3.098104] brcmsmac bcma0:1 wlp2s0b1: renamed from wlan0
[    3.416726] Bluetooth: Core ver 2.22
[    3.416751] NET: Registered protocol family 31
--
[    3.820322] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    3.822437] r8169 0000:03:00.0 enp3s0: link down
[    3.854559] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[    3.854585] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[    3.855736] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[    3.862664] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
--
[   28.495651] random: crng init done
[   28.495654] random: 7 urandom warning(s) missed due to ratelimiting
[   54.295069] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   54.295085] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[   54.296222] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[   56.864741] wlp2s0b1: Trigger new scan to find an IBSS to join
--
[   63.013105] wlp2s0b1: Trigger new scan to find an IBSS to join
[   63.719335] wlp2s0b1: Creating new IBSS network, BSSID c6:74:13:f2:d6:c9
[   63.719828] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   63.720008] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[   63.720016] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: true (implement)
[   63.721473] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[   95.078045] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[   95.078064] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: false (implement)
[   95.150185] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   95.150201] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[   95.151317] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[  183.022503] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  183.022519] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  183.023639] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[  186.920064] wlp2s0b1: Trigger new scan to find an IBSS to join
[  189.992516] wlp2s0b1: Trigger new scan to find an IBSS to join
[  190.706368] wlp2s0b1: Creating new IBSS network, BSSID 76:f8:fd:f5:68:38
[  190.707137] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  190.707309] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[  190.707318] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: true (implement)
[  190.708839] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[  223.097461] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[  223.097481] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: false (implement)
[  223.147414] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  223.147428] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  223.148505] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[  234.080103] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  234.080117] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  234.081245] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[  237.906333] wlp2s0b1: Trigger new scan to find an IBSS to join
[  240.947102] wlp2s0b1: Trigger new scan to find an IBSS to join
[  241.657009] wlp2s0b1: Creating new IBSS network, BSSID 52:c3:e0:db:d1:17
[  241.657789] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  241.657918] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[  241.657927] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: true (implement)
[  241.658955] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[  272.253675] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  272.253692] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[  272.963767] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[  273.094341] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[  273.094357] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: false (implement)
[  273.157334] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  273.157349] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  273.158527] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[  273.944044] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  273.944058] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  273.945290] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[  277.873428] wlp2s0b1: Trigger new scan to find an IBSS to join
[  280.587754] wlp2s0b1: Trigger new scan to find an IBSS to join
[  281.290472] wlp2s0b1: Creating new IBSS network, BSSID 32:d2:1f:02:d2:b5
[  281.291255] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  281.291408] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[  281.291418] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: true (implement)
[  281.293027] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[  312.087892] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[  312.087906] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: false (implement)
[  312.152896] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  312.152913] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  312.154173] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[  312.948799] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  312.948816] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  312.949899] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[  312.956351] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[  312.956515] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[  312.956617] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[  312.957156] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  312.957471] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  312.957713] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  312.958316] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  364.257410] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[  392.921037] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[  424.541721] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[  424.583906] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  424.583922] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  424.585102] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[  574.832077] perf: interrupt took too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[  741.717831] perf: interrupt took too long (3145 > 3136), lowering kernel.perf_event_max_sample_rate to 63500
[  977.594592] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  977.594608] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  977.595751] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[  979.993211] wlp2s0b1: Trigger new scan to find an IBSS to join
[  983.899035] wlp2s0b1: Trigger new scan to find an IBSS to join
[  984.607129] wlp2s0b1: Creating new IBSS network, BSSID aa:66:81:f8:1b:15
[  984.607945] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  984.608084] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[  984.608093] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: true (implement)
[  984.609516] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[  995.539592] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[  995.539608] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: false (implement)
[  995.600295] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  995.600310] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  995.601407] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1023.330976] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 1023.330993] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1023.332087] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1026.846299] wlp2s0b1: Trigger new scan to find an IBSS to join
[ 1029.914368] wlp2s0b1: Trigger new scan to find an IBSS to join
[ 1030.620205] wlp2s0b1: Creating new IBSS network, BSSID 92:45:68:18:1f:d7
[ 1030.620983] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1030.621148] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1030.621158] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: true (implement)
[ 1030.622555] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[ 1062.805432] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1062.805449] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1063.070393] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1063.070413] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: false (implement)
[ 1063.133560] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1063.133575] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1063.134703] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1131.060325] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1131.060340] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1131.061466] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1131.100314] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1153.015862] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 1153.015877] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1153.016947] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1156.854949] wlp2s0b1: Trigger new scan to find an IBSS to join
[ 1159.569118] wlp2s0b1: Trigger new scan to find an IBSS to join
[ 1160.280710] wlp2s0b1: Creating new IBSS network, BSSID 7e:e2:f3:bc:21:bd
[ 1160.281496] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1160.281682] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1160.281691] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: true (implement)
[ 1160.283373] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[ 1192.066736] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1192.066755] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: false (implement)
[ 1192.129223] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1192.129240] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1192.130588] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1192.907497] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 1192.907514] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1192.908621] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1196.854771] wlp2s0b1: Trigger new scan to find an IBSS to join
[ 1199.894684] wlp2s0b1: Trigger new scan to find an IBSS to join
[ 1200.458946] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1200.458962] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: false (implement)
[ 1210.931211] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1210.931226] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1210.932298] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1210.976282] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1211.751437] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 1211.751451] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1211.752556] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1213.974751] wlp2s0b1: Trigger new scan to find an IBSS to join
--
[ 1219.862712] wlp2s0b1: Trigger new scan to find an IBSS to join
[ 1220.580514] wlp2s0b1: Creating new IBSS network, BSSID 62:0d:cb:10:6e:5e
[ 1220.581307] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1220.581481] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1220.581488] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: true (implement)
[ 1220.582523] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[ 1244.258757] perf: interrupt took too long (3932 > 3931), lowering kernel.perf_event_max_sample_rate to 50750
[ 1254.026012] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1254.026028] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1254.728067] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1286.278162] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1286.278179] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1286.980207] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1321.888786] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1321.888801] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1322.590383] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1352.736561] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1352.736577] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1353.441104] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1384.803766] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1384.803782] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1385.508173] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1416.210445] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1416.210468] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1416.915563] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1424.042805] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1424.042816] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: false (implement)
[ 1433.903040] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1433.903055] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1433.904132] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1433.947229] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1434.730002] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 1434.730018] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1434.731130] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1434.731910] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[ 1434.732051] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1434.732357] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 1434.732584] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 1434.732811] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 1434.733035] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 1434.733681] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[ 1459.664282] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
--
[ 1498.917461] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[ 1505.942647] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[ 1532.324153] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1552.942521] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1552.942536] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1552.943667] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1552.987881] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1631.057815] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1657.092995] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 1657.093010] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1657.094420] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1659.923616] wlp2s0b1: Trigger new scan to find an IBSS to join
--
[ 1666.067740] wlp2s0b1: Trigger new scan to find an IBSS to join
[ 1666.781582] wlp2s0b1: Creating new IBSS network, BSSID f2:b2:46:2f:0b:02
[ 1666.782426] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1666.782594] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1666.782605] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: true (implement)
[ 1666.783712] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[ 1709.076736] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1709.076758] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1709.781913] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1768.470404] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1768.470422] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1769.175528] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1801.011043] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1801.011060] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1801.712488] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1831.960433] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1831.960453] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1832.665529] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1889.306370] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1889.306394] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1890.015517] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1945.102770] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1945.102786] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1945.806087] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1977.542523] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1977.542539] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1978.246819] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 2010.142958] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2010.142976] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 2010.848089] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 2049.114649] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2049.114666] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 2049.819521] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 2081.701156] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2081.701173] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 2082.404971] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 2128.916658] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2128.916678] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 2129.621580] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 2147.839014] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 2147.839029] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: false (implement)
[ 2147.887336] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 2147.887350] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 2147.888468] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 3496.706537] perf: interrupt took too long (4929 > 4915), lowering kernel.perf_event_max_sample_rate to 40500
[ 5604.798861] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 5604.798876] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 5604.800072] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 5604.852786] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[29229.512681] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[29229.512695] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[29229.513775] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[29229.581362] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[31000.162684] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[31000.162698] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[31000.163816] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[31000.164645] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[31000.164732] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[31000.166185] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[31000.166803] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[31000.167035] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[31000.167281] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[31000.167524] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[31234.273115] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[31234.299263] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[31234.299280] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[31234.300450] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[32914.120244] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[32914.120257] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[32914.121278] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[32914.163098] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[32914.163111] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[32914.164338] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[33266.978400] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33266.978415] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[33266.979503] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[33266.980621] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[33266.980774] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[33266.981058] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[33266.981453] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33266.981692] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33266.981947] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33266.982193] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33313.567157] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[33313.569923] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 137/256 dur 1602/1504
[33313.582230] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 241/256 dur 2434/1504
[33337.261820] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[33382.461876] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[33478.255622] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[33478.255637] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[33478.256763] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[33478.307921] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[33479.091718] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33479.091734] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[33479.092804] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[33479.094127] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[33479.094283] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[33479.094752] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[33479.095114] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33479.095380] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33479.095650] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33479.095905] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33513.132603] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[33513.176571] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[33513.176586] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[33513.178182] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[33609.472836] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33609.472850] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[33609.473961] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[33609.475315] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[33609.475467] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[33609.475969] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[33609.476360] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33609.476617] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33609.476874] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33609.477115] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[34095.925356] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[34095.970449] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[34095.970465] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[34095.971849] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[34131.786056] wlp2s0b1: authenticate with 00:24:d4:70:d9:db
[34131.788742] wlp2s0b1: send auth to 00:24:d4:70:d9:db (try 1/3)
[34131.790575] wlp2s0b1: authenticated
[34131.790895] brcmsmac bcma0:1 wlp2s0b1: disabling HT/VHT due to WEP/TKIP use
[34131.793056] wlp2s0b1: associate with 00:24:d4:70:d9:db (try 1/3)
[34131.795747] wlp2s0b1: RX AssocResp from 00:24:d4:70:d9:db (capab=0x411 status=0 aid=2)
[34131.796368] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[34131.796375] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[34131.796403] wlp2s0b1: associated
[34131.796725] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[34151.696767] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[34151.696779] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[34152.502325] wlp2s0b1: authenticate with 00:24:d4:70:d9:db
[34152.502421] wlp2s0b1: send auth to 00:24:d4:70:d9:db (try 1/3)
[34152.504086] wlp2s0b1: authenticated
[34152.504328] brcmsmac bcma0:1 wlp2s0b1: disabling HT/VHT due to WEP/TKIP use
[34152.504845] wlp2s0b1: associate with 00:24:d4:70:d9:db (try 1/3)
[34152.507580] wlp2s0b1: RX AssocResp from 00:24:d4:70:d9:db (capab=0x411 status=0 aid=2)
[34152.508185] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[34152.508191] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[34152.508203] wlp2s0b1: associated
[34162.898891] wlp2s0b1: deauthenticating from 00:24:d4:70:d9:db by local choice (Reason: 3=DEAUTH_LEAVING)
[34162.932183] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[34162.932195] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[34165.603530] wlp2s0b1: authenticate with 00:24:d4:70:d9:db
[34165.603657] wlp2s0b1: send auth to 00:24:d4:70:d9:db (try 1/3)
[34165.605410] wlp2s0b1: authenticated
[34165.605621] brcmsmac bcma0:1 wlp2s0b1: disabling HT/VHT due to WEP/TKIP use
[34165.608725] wlp2s0b1: associate with 00:24:d4:70:d9:db (try 1/3)
[34165.611433] wlp2s0b1: RX AssocResp from 00:24:d4:70:d9:db (capab=0x411 status=0 aid=2)
[34165.612059] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[34165.612064] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[34165.612072] wlp2s0b1: associated
[34211.383599] wlp2s0b1: deauthenticating from 00:24:d4:70:d9:db by local choice (Reason: 3=DEAUTH_LEAVING)
[34211.384643] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[34211.384651] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[34298.338537] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[34332.093937] wlp2s0b1: authenticate with 00:24:d4:70:d9:db
[34332.094041] wlp2s0b1: send auth to 00:24:d4:70:d9:db (try 1/3)
[34332.097030] wlp2s0b1: authenticated
[34332.097297] brcmsmac bcma0:1 wlp2s0b1: disabling HT/VHT due to WEP/TKIP use
[34332.100998] wlp2s0b1: associate with 00:24:d4:70:d9:db (try 1/3)
[34332.103705] wlp2s0b1: RX AssocResp from 00:24:d4:70:d9:db (capab=0x411 status=0 aid=2)
[34332.104393] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[34332.104400] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[34332.104412] wlp2s0b1: associated
[34332.104887] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[34335.736947] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[34335.736960] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[34336.542193] wlp2s0b1: authenticate with 00:24:d4:70:d9:db
[34336.542344] wlp2s0b1: send auth to 00:24:d4:70:d9:db (try 1/3)
[34336.544170] wlp2s0b1: authenticated
[34336.544461] brcmsmac bcma0:1 wlp2s0b1: disabling HT/VHT due to WEP/TKIP use
[34336.544889] wlp2s0b1: associate with 00:24:d4:70:d9:db (try 1/3)
[34336.549909] wlp2s0b1: RX AssocResp from 00:24:d4:70:d9:db (capab=0x411 status=0 aid=2)
[34336.550504] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[34336.550513] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[34336.550525] wlp2s0b1: associated
[34344.704770] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[34344.704786] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[34345.514374] wlp2s0b1: authenticate with 00:24:d4:70:d9:db
[34345.514482] wlp2s0b1: send auth to 00:24:d4:70:d9:db (try 1/3)
--
[34346.917965] wlp2s0b1: send auth to 00:24:d4:70:d9:db (try 1/3)
[34346.919704] wlp2s0b1: authenticated
[34346.919968] brcmsmac bcma0:1 wlp2s0b1: disabling HT/VHT due to WEP/TKIP use
[34346.920708] wlp2s0b1: associate with 00:24:d4:70:d9:db (try 1/3)
[34346.923384] wlp2s0b1: RX AssocResp from 00:24:d4:70:d9:db (capab=0x411 status=0 aid=2)
[34346.924123] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[34346.924131] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[34346.924144] wlp2s0b1: associated
[34350.700667] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[34350.700680] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[34351.510176] wlp2s0b1: authenticate with 00:24:d4:70:d9:db
[34351.510251] wlp2s0b1: send auth to 00:24:d4:70:d9:db (try 1/3)
[34351.516853] wlp2s0b1: authenticated
[34351.517412] brcmsmac bcma0:1 wlp2s0b1: disabling HT/VHT due to WEP/TKIP use
[34351.520485] wlp2s0b1: associate with 00:24:d4:70:d9:db (try 1/3)
[34351.537103] wlp2s0b1: RX AssocResp from 00:24:d4:70:d9:db (capab=0x411 status=0 aid=2)
[34351.537692] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[34351.537697] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[34351.537707] wlp2s0b1: associated
[34353.708570] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[34353.708581] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[34354.513741] wlp2s0b1: authenticate with 00:24:d4:70:d9:db
[34354.513833] wlp2s0b1: send auth to 00:24:d4:70:d9:db (try 1/3)
--
[34361.653451] wlp2s0b1: send auth to 00:24:d4:70:d9:db (try 1/3)
[34361.655316] wlp2s0b1: authenticated
[34361.655594] brcmsmac bcma0:1 wlp2s0b1: disabling HT/VHT due to WEP/TKIP use
[34361.656292] wlp2s0b1: associate with 00:24:d4:70:d9:db (try 1/3)
[34361.659008] wlp2s0b1: RX AssocResp from 00:24:d4:70:d9:db (capab=0x411 status=0 aid=2)
[34361.659607] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[34361.659615] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[34361.659627] wlp2s0b1: associated
[34377.375411] wlp2s0b1: deauthenticating from 00:24:d4:70:d9:db by local choice (Reason: 3=DEAUTH_LEAVING)
[34377.376471] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[34377.376479] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[34393.736682] wlp2s0b1: authenticate with 00:24:d4:70:d9:db
[34393.736782] wlp2s0b1: send auth to 00:24:d4:70:d9:db (try 1/3)
[34393.738476] wlp2s0b1: authenticated
[34393.738715] brcmsmac bcma0:1 wlp2s0b1: disabling HT/VHT due to WEP/TKIP use
[34393.739660] wlp2s0b1: associate with 00:24:d4:70:d9:db (try 1/3)
[34393.742751] wlp2s0b1: RX AssocResp from 00:24:d4:70:d9:db (capab=0x411 status=0 aid=2)
[34393.743405] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[34393.743415] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[34393.743556] wlp2s0b1: associated
[34439.373788] wlp2s0b1: deauthenticating from 00:24:d4:70:d9:db by local choice (Reason: 3=DEAUTH_LEAVING)
[34439.374911] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[34439.374922] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[34510.549748] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[34961.140411] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
--
[34963.640384] r8169 0000:03:00.0 enp3s0: link up
[34963.640401] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[34976.446105] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[34976.446120] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[34976.447255] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[35011.147359] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[35011.147373] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[35011.148659] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[35177.336309] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
--
[35177.730258] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[35177.764363] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[35178.546096] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[35178.546110] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[35178.547288] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[35178.548694] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[35178.550746] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[35178.550933] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[35178.551598] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[35178.551830] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[35178.552079] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[35178.552325] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[35180.401720] r8169 0000:03:00.0 enp3s0: link up
[35180.401738] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[39851.119317] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[39851.160287] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[39851.160303] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[39851.161432] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[39955.835059] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
--
[39960.934085] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[39960.935857] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[39960.949289] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[39960.949302] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[39960.950377] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[39960.998884] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[39961.778662] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[39961.778678] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[39961.779712] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[39961.780560] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[39961.780700] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[39961.780841] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[39961.781187] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[39961.781433] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[39961.781672] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[39961.781916] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[39963.399213] r8169 0000:03:00.0 enp3s0: link up
[39963.399229] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
--
[41746.640224] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[41757.714373] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[41759.622002] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[41759.666230] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[41759.666246] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[41759.667357] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[41773.847179] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[41773.847193] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[41773.848345] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[41773.849121] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[41773.849277] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[41773.849594] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[41773.849992] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[41773.850237] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[41773.850483] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[41773.850716] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[41792.899888] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[41792.902683] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 137/256 dur 1602/1504
[41792.908371] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 241/256 dur 2434/1504
[41855.458500] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[42261.407932] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[44803.734952] CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
[44803.734953] CPU3: Core temperature above threshold, cpu clock throttled (total events = 1)
lubuntu@lubuntu-HP-Pavilion-dv7-Notebook-PC:~$

Nuliel

[44803.734952] CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
[44803.734953] CPU3: Core temperature above threshold, cpu clock throttled (total events = 1)

Il faudrait peut être s'intéresser à la température du pc

[supprimé]

Aie oui j'ai désactivé le ventilateur du bios ce matin mais je vais penser à le remettre , de temps en temps en travaillant la photo ça pousse le processeur limite limite 🙂

Nuliel

Bah justement, si tu coupes le ventilo, c'est pire! (tu vas finir sans pc en faisant ce genre de choses)

[supprimé]

C'était pour le bruit un peu génant le matin , ma femme complaint , du coup là je viens de mettre le ventilateur plateau en route ! 🙂

xubu1957

[    1.123772] mmc0: SDHCI controller on PCI [0000:04:00.1] using DMA
[    1.123812] sdhci-pci 0000:04:00.2: SDHCI controller found [197b:2381] (rev 0)
[    1.127406] bcma: bus0: Found chip with id 43225, rev 0x01 and package 0x0A

mmc0: SDHCI controller on PCI

@Naziel

Tu connais ?

[supprimé]

Ceci dit je viens d'upgrader le processeur en passant du 430M au 640M , ça chauffe un poil plus pour à peine 15% d'amélioration

[supprimé]

Ce serait mon lecteur de carte SD intégré peut-être ?

Nuliel

http://www.varsanofiev.com/inside/WritingLinuxSDIODrivers.htm a écrit mmc/host contains the host adapter drivers. sdhci is of particular interest, as it implements the SDIO host interface for the “Secure Digital Host Controller Interface”-compliant chips, including the near-omnipresent Ricoh controllers.

Maintenant oui 🙂

xubu1957

@Naziel

Le 21/11/2018, Arnaud04 a écritMerci beaucoup

wget https://github.com/khadas/android_hardware_amlogic_wifi/raw/b6709758755568e4a0ff6e80993be0fc64c77fb9/bcm_ampak/config/6255/nvram.txt
sudo cp nvram.txt /lib/firmware/brcm/brcmfmac43455-sdio.txt

un redémarrage, et ça fonctionne, le wifi fonctionne !

🙂

mais :

 uname -mr
4.18.0-10-generic x86_64

rajout lien > [Résolu] carte wifi BCM43455-sdio - Pas de wifi sur un mini PC

[supprimé]

Eh beh , ça c'est un ordi ! 🙂
Je viens d'essayer la méthode Naziel sur le lien que tu as envoyé , alors j'ai une question , le mode infrastructure c'est bien le mode adhoc ?
Cela ne fonctionne toujours pas , par contre impossible de modifier le fichier , j'ai dû l'ouvrir par l'interface en double clic sur le fichier et demandé à l'ouvrir avec le terminal en envoyant la commande sudo nano , mais pas en directement avec le terminal sudo nano chemin du fichier (?)
Bref , ça deconnecte toute les 10 secondes encore ..

Nuliel

@xubu: J'ai pas compris ce que tu veux me dire

@toulibre: c'est pas impossible que la carte wifi soit pas encore assez bien supportée pour ça. Normal que tu aies utilisé sudo nano. Je sais pas trop quoi proposer d'autre

« Page précédente Page suivante »