Hello,
Je rencontre depuis quelques jours / semaines un souci avec le wifi qui passe par un dongle usb wifi+bt realtek 0bda:b720.
Je ne pense pas qu'il s'agisse d'un problème de driver ( voir
https://forum.ubuntu-fr.org/viewtopic.php?pid=22016253#p22016253 ) ici ce qui m'inquiète c'est que le périphérique ne semble parfois plus vu du tout par le système :
⋅ il n'apparaît plus dans lsusb
⋅ le dmesg présente des usb disconnect à son encontre :
coeurnoir@Asgard:~$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0x25, date = 2018-04-02
[ 0.000000] Linux version 4.15.0-42-generic (buildd@lgw01-amd64-023) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.10)) #45~16.04.1-Ubuntu SMP Mon Nov 19 13:02:27 UTC 2018 (Ubuntu 4.15.0-42.45~16.04.1-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-42-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c3752fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c3753000-0x00000000c3759fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c375a000-0x00000000c3badfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c3bae000-0x00000000c400efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c400f000-0x00000000d8644fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d8645000-0x00000000d884dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d884e000-0x00000000d8866fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d8867000-0x00000000d8da7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d8da8000-0x00000000d9ffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUS All Series/Z87-C, BIOS 2103 08/15/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00DC000000 mask 7FFC000000 uncachable
[ 0.000000] 4 base 00DB000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 041FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 16302M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 9 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xda000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd850-0x000fd85f] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x2b933f000, 0x2b933ffff] PGTABLE
[ 0.000000] BRK [0x2b9340000, 0x2b9340fff] PGTABLE
[ 0.000000] BRK [0x2b9341000, 0x2b9341fff] PGTABLE
[ 0.000000] BRK [0x2b9342000, 0x2b9342fff] PGTABLE
[ 0.000000] BRK [0x2b9343000, 0x2b9343fff] PGTABLE
[ 0.000000] BRK [0x2b9344000, 0x2b9344fff] PGTABLE
[ 0.000000] BRK [0x2b9345000, 0x2b9345fff] PGTABLE
[ 0.000000] BRK [0x2b9346000, 0x2b9346fff] PGTABLE
[ 0.000000] BRK [0x2b9347000, 0x2b9347fff] PGTABLE
[ 0.000000] BRK [0x2b9348000, 0x2b9348fff] PGTABLE
[ 0.000000] BRK [0x2b9349000, 0x2b9349fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x31790000-0x34bbffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000D8853080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000D8861838 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000D8853198 00E699 (v02 ALASKA A M I 00000031 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000D8DA6080 000040
[ 0.000000] ACPI: APIC 0x00000000D8861948 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000D88619E0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: LPIT 0x00000000D8861A28 00005C (v01 ALASKA A M I 00000000 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D8861A88 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000D8861FC8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20091112)
[ 0.000000] ACPI: MCFG 0x00000000D8862AA0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000D8862AE0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D8862B18 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000D8862E88 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: BGRT 0x00000000D88663C8 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41fdd5000-0x41fdfffff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c3752fff]
[ 0.000000] node 0: [mem 0x00000000c375a000-0x00000000c3badfff]
[ 0.000000] node 0: [mem 0x00000000c400f000-0x00000000d8644fff]
[ 0.000000] node 0: [mem 0x00000000d9fff000-0x00000000d9ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041fdfffff]
[ 0.000000] On node 0 totalpages: 4161402
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13768 pages used for memmap
[ 0.000000] DMA32 zone: 881118 pages, LIFO batch:31
[ 0.000000] Normal zone: 51192 pages used for memmap
[ 0.000000] Normal zone: 3276288 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 100 pages
[ 0.000000] Reserving Intel graphics memory at 0x00000000db200000-0x00000000df1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc3753000-0xc3759fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc3bae000-0xc400efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8645000-0xd884dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd884e000-0xd8866fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8867000-0xd8da7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8da8000-0xd9ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x51b with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4096357
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-42-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash vt.handoff=7
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16234336K/16645608K available (12300K kernel code, 2471K rwdata, 4260K rodata, 2408K init, 2416K bss, 411272K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39192 entries in 154 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 3498.061 MHz processor
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6996.12 BogoMIPS (lpj=13992244)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: becoming mindful.
[ 0.024000] AppArmor: AppArmor initialized
[ 0.024000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.028335] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.028375] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.028408] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.028560] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.028561] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.028564] mce: CPU supports 9 MCE banks
[ 0.028571] CPU0: Thermal monitoring enabled (TM1)
[ 0.028581] process: using mwait in idle threads
[ 0.028583] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.028583] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.028584] Spectre V2 : Mitigation: Full generic retpoline
[ 0.028585] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.028585] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.028585] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.028586] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.032705] Freeing SMP alternatives memory: 36K
[ 0.033654] TSC deadline timer enabled
[ 0.033656] smpboot: CPU0: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.033700] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.033729] ... version: 3
[ 0.033729] ... bit width: 48
[ 0.033730] ... generic registers: 4
[ 0.033730] ... value mask: 0000ffffffffffff
[ 0.033731] ... max period: 00007fffffffffff
[ 0.033731] ... fixed-purpose events: 3
[ 0.033731] ... event mask: 000000070000000f
[ 0.033756] Hierarchical SRCU implementation.
[ 0.034626] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.034637] smp: Bringing up secondary CPUs ...
[ 0.034682] x86: Booting SMP configuration:
[ 0.034683] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.037510] smp: Brought up 1 node, 8 CPUs
[ 0.037510] smpboot: Max logical packages: 1
[ 0.037510] smpboot: Total of 8 processors activated (55968.97 BogoMIPS)
[ 0.040346] devtmpfs: initialized
[ 0.040346] x86/mm: Memory block size: 128MB
[ 0.040814] evm: security.selinux
[ 0.040814] evm: security.SMACK64
[ 0.040815] evm: security.SMACK64EXEC
[ 0.040815] evm: security.SMACK64TRANSMUTE
[ 0.040815] evm: security.SMACK64MMAP
[ 0.040815] evm: security.apparmor
[ 0.040816] evm: security.ima
[ 0.040816] evm: security.capability
[ 0.040826] PM: Registering ACPI NVS region [mem 0xc3753000-0xc3759fff] (28672 bytes)
[ 0.040826] PM: Registering ACPI NVS region [mem 0xd8867000-0xd8da7fff] (5509120 bytes)
[ 0.040826] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.040826] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.040826] pinctrl core: initialized pinctrl subsystem
[ 0.040826] RTC time: 13:54:52, date: 12/15/18
[ 0.040826] NET: Registered protocol family 16
[ 0.040826] audit: initializing netlink subsys (disabled)
[ 0.040826] audit: type=2000 audit(1544882092.040:1): state=initialized audit_enabled=0 res=1
[ 0.040826] cpuidle: using governor ladder
[ 0.040826] cpuidle: using governor menu
[ 0.040826] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.040826] ACPI: bus type PCI registered
[ 0.040826] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.040826] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.040826] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.040826] PCI: Using configuration type 1 for base access
[ 0.040826] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.040930] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.040930] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.040930] ACPI: Added _OSI(Module Device)
[ 0.040930] ACPI: Added _OSI(Processor Device)
[ 0.040930] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.040930] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.040930] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.040930] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.040930] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.045576] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.048131] ACPI: Dynamic OEM Table Load:
[ 0.048135] ACPI: SSDT 0xFFFF9EFD0CC15C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
[ 0.048300] ACPI: Dynamic OEM Table Load:
[ 0.048304] ACPI: SSDT 0xFFFF9EFD0D0E9800 0005AA (v01 PmRef ApIst 00003000 INTL 20091112)
[ 0.048659] ACPI: Dynamic OEM Table Load:
[ 0.048659] ACPI: SSDT 0xFFFF9EFD0CD19400 000119 (v01 PmRef ApCst 00003000 INTL 20091112)
[ 0.049621] ACPI: Interpreter enabled
[ 0.049643] ACPI: (supports S0 S3 S4 S5)
[ 0.049644] ACPI: Using IOAPIC for interrupt routing
[ 0.049668] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.049911] ACPI: Enabled 11 GPEs in block 00 to 3F
[ 0.056698] ACPI: Power Resource [FN00] (off)
[ 0.056763] ACPI: Power Resource [FN01] (off)
[ 0.056826] ACPI: Power Resource [FN02] (off)
[ 0.056888] ACPI: Power Resource [FN03] (off)
[ 0.056950] ACPI: Power Resource [FN04] (off)
[ 0.057729] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.057733] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.057910] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.058056] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.058057] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.058440] PCI host bridge to bus 0000:00
[ 0.058441] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.058442] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.058443] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.058444] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.058445] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.058446] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.058447] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.058447] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.058448] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.058449] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[ 0.058450] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.058456] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.058528] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.058556] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.058655] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[ 0.058663] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.058667] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.058670] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.058734] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.058741] pci 0000:00:03.0: reg 0x10: [mem 0xf7d04000-0xf7d07fff 64bit]
[ 0.058824] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.058841] pci 0000:00:16.0: reg 0x10: [mem 0xf7d0e000-0xf7d0e00f 64bit]
[ 0.058893] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.058953] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.058971] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d0c000-0xf7d0c3ff]
[ 0.059041] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.059098] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.059114] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d00000-0xf7d03fff 64bit]
[ 0.059172] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.059229] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.059288] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.059386] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.059446] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.059542] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
[ 0.059602] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.059701] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.059719] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d0b000-0xf7d0b3ff]
[ 0.059790] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.059848] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
[ 0.059992] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.060006] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.060011] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.060016] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.060022] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.060027] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.060033] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d0a000-0xf7d0a7ff]
[ 0.060062] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.060114] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.060128] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d09000-0xf7d090ff 64bit]
[ 0.060144] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.060230] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.060280] acpiphp: Slot [1] registered
[ 0.060284] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.060345] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.060372] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.060398] pci 0000:03:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
[ 0.060414] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.060506] pci 0000:03:00.0: supports D1 D2
[ 0.060507] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.076017] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.076020] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.076022] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.076026] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.076081] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
[ 0.076201] pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode)
[ 0.076208] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.076209] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.076210] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.076211] pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.076212] pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.076212] pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.076213] pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.076214] pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.076215] pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.076216] pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[ 0.076302] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.076318] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.076319] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.076320] pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.076320] pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.076321] pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.076322] pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.076323] pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.076324] pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.076325] pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.076325] pci 0000:04:00.0: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[ 0.077068] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.077117] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.077166] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.077213] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.077261] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.077308] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.077355] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.077403] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.077843] SCSI subsystem initialized
[ 0.077854] libata version 3.00 loaded.
[ 0.077854] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.077854] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.077854] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.077854] vgaarb: loaded
[ 0.077854] ACPI: bus type USB registered
[ 0.077854] usbcore: registered new interface driver usbfs
[ 0.077854] usbcore: registered new interface driver hub
[ 0.077854] usbcore: registered new device driver usb
[ 0.077854] EDAC MC: Ver: 3.0.0
[ 0.077854] PCI: Using ACPI for IRQ routing
[ 0.077854] PCI: pci_cache_line_size set to 64 bytes
[ 0.077854] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.077854] e820: reserve RAM buffer [mem 0xc3753000-0xc3ffffff]
[ 0.077854] e820: reserve RAM buffer [mem 0xc3bae000-0xc3ffffff]
[ 0.077854] e820: reserve RAM buffer [mem 0xd8645000-0xdbffffff]
[ 0.077854] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
[ 0.077854] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
[ 0.077854] NetLabel: Initializing
[ 0.077854] NetLabel: domain hash size = 128
[ 0.077854] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.077854] NetLabel: unlabeled traffic allowed by default
[ 0.077854] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.077854] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.081015] clocksource: Switched to clocksource hpet
[ 0.087041] VFS: Disk quotas dquot_6.6.0
[ 0.087053] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.087124] AppArmor: AppArmor Filesystem Enabled
[ 0.087144] pnp: PnP ACPI init
[ 0.087232] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.087236] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.087406] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.087407] system 00:01: [io 0xffff] has been reserved
[ 0.087408] system 00:01: [io 0xffff] has been reserved
[ 0.087409] system 00:01: [io 0xffff] has been reserved
[ 0.087410] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.087411] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.087412] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.087413] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.087414] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.087415] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.087418] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.087435] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.087474] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.087477] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.087551] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.087553] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.087593] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.087595] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.087802] pnp 00:06: [dma 0 disabled]
[ 0.087835] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.087867] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.088269] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.088270] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.088271] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.088272] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.088273] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.088274] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.088275] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.088276] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.088278] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.088279] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.088280] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.088281] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.088284] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.088502] pnp: PnP ACPI: found 9 devices
[ 0.094064] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.094096] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.094101] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.094109] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.094111] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.094114] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.094116] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.094120] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.094136] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
[ 0.094144] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.094145] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.094146] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.094147] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.094148] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.094149] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.094150] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.094151] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.094152] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.094153] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.094154] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.094155] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.094156] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.094157] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.094158] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.094159] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.094159] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.094160] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.094161] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.094162] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.094163] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.094164] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.094165] pci_bus 0000:04: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.094166] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.094167] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.094168] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.094169] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.094169] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.094170] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.094171] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.094172] pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.094173] pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.094174] pci_bus 0000:05: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.094262] NET: Registered protocol family 2
[ 0.094412] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.094542] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.094653] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.094680] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.094715] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.094771] NET: Registered protocol family 1
[ 0.094780] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.136085] PCI: CLS 64 bytes, default 64
[ 0.136107] Unpacking initramfs...
[ 0.656389] Freeing initrd memory: 53440K
[ 0.656430] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.656433] software IO TLB [mem 0xd4645000-0xd8645000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 0.656689] Scanning for low memory corruption every 60 seconds
[ 0.657140] Initialise system trusted keyrings
[ 0.657146] Key type blacklist registered
[ 0.657168] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.657875] zbud: loaded
[ 0.658196] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.658277] fuse init (API version 7.26)
[ 0.659079] Key type asymmetric registered
[ 0.659079] Asymmetric key parser 'x509' registered
[ 0.659096] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.659121] io scheduler noop registered
[ 0.659121] io scheduler deadline registered
[ 0.659146] io scheduler cfq registered (default)
[ 0.659569] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.659569] vesafb: scrolling: redraw
[ 0.659570] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.659577] vesafb: framebuffer at 0xe0000000, mapped to 0x (ptrval), using 8128k, total 8128k
[ 0.659627] Console: switching to colour frame buffer device 240x67
[ 0.659643] fb0: VESA VGA frame buffer device
[ 0.659651] intel_idle: MWAIT substates: 0x42120
[ 0.659651] intel_idle: v0.4.1 model 0x3C
[ 0.659835] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.659902] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.659909] ACPI: Power Button [PWRB]
[ 0.659932] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.659948] ACPI: Power Button [PWRF]
[ 0.660578] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.660690] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.660690] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.660911] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.660912] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.660998] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.681471] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.682603] Linux agpgart interface v0.103
[ 0.683838] loop: module loaded
[ 0.683935] libphy: Fixed MDIO Bus: probed
[ 0.683935] tun: Universal TUN/TAP device driver, 1.6
[ 0.683953] PPP generic driver version 2.4.2
[ 0.683976] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.683978] ehci-pci: EHCI PCI platform driver
[ 0.684076] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.684080] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.684088] ehci-pci 0000:00:1a.0: debug port 2
[ 0.687998] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.688011] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7d0c000
[ 0.704028] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.704053] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.704054] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.704055] usb usb1: Product: EHCI Host Controller
[ 0.704056] usb usb1: Manufacturer: Linux 4.15.0-42-generic ehci_hcd
[ 0.704057] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.704129] hub 1-0:1.0: USB hub found
[ 0.704133] hub 1-0:1.0: 2 ports detected
[ 0.704290] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.704293] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.704302] ehci-pci 0000:00:1d.0: debug port 2
[ 0.708201] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.708208] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d0b000
[ 0.724029] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.724052] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.724054] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.724054] usb usb2: Product: EHCI Host Controller
[ 0.724055] usb usb2: Manufacturer: Linux 4.15.0-42-generic ehci_hcd
[ 0.724056] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.724124] hub 2-0:1.0: USB hub found
[ 0.724127] hub 2-0:1.0: 2 ports detected
[ 0.724214] ehci-platform: EHCI generic platform driver
[ 0.724219] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.724221] ohci-pci: OHCI PCI platform driver
[ 0.724227] ohci-platform: OHCI generic platform driver
[ 0.724230] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.724260] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.724260] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.724882] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.724944] mousedev: PS/2 mouse device common for all mice
[ 0.725035] rtc_cmos 00:02: RTC can wake from S4
[ 0.725132] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.725152] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.725156] i2c /dev entries driver
[ 0.725159] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[ 0.725194] device-mapper: uevent: version 1.0.3
[ 0.725231] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 0.725235] intel_pstate: Intel P-state driver initializing
[ 0.725583] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.725884] NET: Registered protocol family 10
[ 0.728693] Segment Routing with IPv6
[ 0.728705] NET: Registered protocol family 17
[ 0.728751] Key type dns_resolver registered
[ 0.729195] RAS: Correctable Errors collector initialized.
[ 0.729209] microcode: sig=0x306c3, pf=0x2, revision=0x25
[ 0.729344] microcode: Microcode Update Driver: v2.2.
[ 0.729350] sched_clock: Marking stable (729341581, 0)->(713862466, 15479115)
[ 0.729496] registered taskstats version 1
[ 0.729501] Loading compiled-in X.509 certificates
[ 0.731108] Loaded X.509 cert 'Build time autogenerated kernel key: 2e7d761f2a59f0511a4bdf8e420ba040dde1244e'
[ 0.731119] zswap: loaded using pool lzo/zbud
[ 0.733391] Key type big_key registered
[ 0.733394] Key type trusted registered
[ 0.734543] Key type encrypted registered
[ 0.734544] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.734546] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 0.734548] ima: Allocated hash algorithm: sha1
[ 0.734557] evm: HMAC attrs: 0x1
[ 0.734871] Magic number: 14:433:938
[ 0.734971] rtc_cmos 00:02: setting system clock to 2018-12-15 13:54:53 UTC (1544882093)
[ 0.734999] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.734999] EDD information not available.
[ 0.746683] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.980693] Freeing unused kernel memory: 2408K
[ 1.008035] Write protecting the kernel read-only data: 20480k
[ 1.008824] Freeing unused kernel memory: 2008K
[ 1.011420] Freeing unused kernel memory: 1884K
[ 1.015591] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.015592] x86/mm: Checking user space page tables
[ 1.019688] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.027871] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.027922] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.027929] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.040004] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.060005] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.065818] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.065825] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.066476] ahci 0000:00:1f.2: version 3.0
[ 1.066601] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x35 impl SATA mode
[ 1.066602] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 1.076939] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0x (ptrval), 74:d0:2b:9e:fb:40, XID 0c000800 IRQ 25
[ 1.076940] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.085398] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 1.104850] scsi host0: ahci
[ 1.104982] scsi host1: ahci
[ 1.105179] scsi host2: ahci
[ 1.105293] scsi host3: ahci
[ 1.105366] scsi host4: ahci
[ 1.105416] scsi host5: ahci
[ 1.105439] ata1: SATA max UDMA/133 abar m2048@0xf7d0a000 port 0xf7d0a100 irq 24
[ 1.105440] ata2: DUMMY
[ 1.105441] ata3: SATA max UDMA/133 abar m2048@0xf7d0a000 port 0xf7d0a200 irq 24
[ 1.105441] ata4: DUMMY
[ 1.105443] ata5: SATA max UDMA/133 abar m2048@0xf7d0a000 port 0xf7d0a300 irq 24
[ 1.105444] ata6: SATA max UDMA/133 abar m2048@0xf7d0a000 port 0xf7d0a380 irq 24
[ 1.132134] [drm] Memory usable by graphics device = 2048M
[ 1.132135] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[ 1.132136] fb: switching to inteldrmfb from VESA VGA
[ 1.132151] Console: switching to colour dummy device 80x25
[ 1.132203] [drm] Replacing VGA console driver
[ 1.138063] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.138064] [drm] Driver supports precise vblank timestamp query.
[ 1.140055] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.142898] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 1.143986] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.144206] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.196462] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.196463] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.196698] hub 1-1:1.0: USB hub found
[ 1.196831] hub 1-1:1.0: 6 ports detected
[ 1.216462] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.216463] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.216744] hub 2-1:1.0: USB hub found
[ 1.216813] hub 2-1:1.0: 8 ports detected
[ 1.264745] fbcon: inteldrmfb (fb0) is primary device
[ 1.264786] Console: switching to colour frame buffer device 240x67
[ 1.264804] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.418817] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.418832] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.418845] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.418903] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.419002] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 1.419008] No Local Variables are initialized for Method [_GTF]
[ 1.419009] No Arguments are initialized for method [_GTF]
[ 1.419011] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 1.419321] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 1.419327] No Local Variables are initialized for Method [_GTF]
[ 1.419328] No Arguments are initialized for method [_GTF]
[ 1.419329] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT5._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 1.419417] ata5.00: NCQ Send/Recv Log not supported
[ 1.419418] ata5.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB0Q, max UDMA/133
[ 1.419419] ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.419524] ata6.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
[ 1.419525] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.419656] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 1.419662] No Local Variables are initialized for Method [_GTF]
[ 1.419663] No Arguments are initialized for method [_GTF]
[ 1.419665] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 1.419872] ata3.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3MA, max UDMA/133
[ 1.419873] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.419973] ata5.00: NCQ Send/Recv Log not supported
[ 1.419975] ata5.00: configured for UDMA/133
[ 1.420031] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 1.420036] No Local Variables are initialized for Method [_GTF]
[ 1.420037] No Arguments are initialized for method [_GTF]
[ 1.420038] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT5._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 1.420201] ata6.00: configured for UDMA/133
[ 1.420467] ata1.00: ATAPI: ATAPI iHAS124 Y, BL0V, max UDMA/100
[ 1.421073] ata3.00: configured for UDMA/133
[ 1.422439] ata1.00: configured for UDMA/100
[ 1.424261] scsi 0:0:0:0: CD-ROM ATAPI iHAS124 Y BL0V PQ: 0 ANSI: 5
[ 1.484022] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.493662] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.493663] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.493770] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.493840] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.493988] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72101 A3MA PQ: 0 ANSI: 5
[ 1.494094] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.494198] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.494223] scsi 4:0:0:0: Direct-Access ATA Samsung SSD 840 BB0Q PQ: 0 ANSI: 5
[ 1.494228] sd 2:0:0:0: [sda] Write Protect is off
[ 1.494229] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.494284] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.494314] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1.494323] sd 4:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 1.494330] sd 4:0:0:0: [sdb] Write Protect is off
[ 1.494331] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.494341] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.494411] scsi 5:0:0:0: Direct-Access ATA WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
[ 1.494500] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.494501] sd 5:0:0:0: [sdc] 4096-byte physical blocks
[ 1.494506] sd 5:0:0:0: [sdc] Write Protect is off
[ 1.494507] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.494514] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 1.494517] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.494740] sdb: sdb1 < sdb5 > sdb2 sdb3 sdb4
[ 1.495010] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 1.508021] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[ 1.517119] sda: sda1 sda2
[ 1.517756] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.549307] sdc: sdc1 sdc2 < sdc5 >
[ 1.549744] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 1.597648] random: fast init done
[ 1.599175] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52f
[ 1.599176] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.599177] usb 1-1.1: Product: USB Receiver
[ 1.599178] usb 1-1.1: Manufacturer: Logitech
[ 1.602349] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.605849] usbcore: registered new interface driver usbhid
[ 1.605849] usbhid: USB HID core driver
[ 1.606900] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C52F.0001/input/input4
[ 1.606957] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input0
[ 1.607071] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52F.0002/input/input5
[ 1.620899] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 1.620901] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.620902] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 1.620903] usb 2-1.1: Manufacturer: Realtek
[ 1.620903] usb 2-1.1: SerialNumber: 00E04C000001
[ 1.660004] tsc: Refined TSC clocksource calibration: 3497.972 MHz
[ 1.660009] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x326bd592a83, max_idle_ns: 440795311901 ns
[ 1.664168] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input1
[ 1.680022] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[ 2.205717] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.407300] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0158
[ 2.407301] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.407302] usb 1-1.2: Product: USB2.0-CRW
[ 2.407303] usb 1-1.2: Manufacturer: Generic
[ 2.407304] usb 1-1.2: SerialNumber: 20060413092100000
[ 2.512958] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 2.532128] systemd[1]: Detected architecture x86-64.
[ 2.532272] systemd[1]: Set hostname to <Asgard>.
[ 2.678006] systemd[1]: Listening on Syslog Socket.
[ 2.678069] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[ 2.678080] systemd[1]: Reached target User and Group Name Lookups.
[ 2.678107] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.678127] systemd[1]: Listening on udev Kernel Socket.
[ 2.678188] systemd[1]: Created slice User and Session Slice.
[ 2.678198] systemd[1]: Reached target Remote File Systems (Pre).
[ 2.684053] clocksource: Switched to clocksource tsc
[ 2.716371] EXT4-fs (sdb2): re-mounted. Opts: discard,errors=remount-ro
[ 2.746456] lp: driver loaded but no devices found
[ 2.749084] ppdev: user-space parallel port driver
[ 2.763269] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.764676] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.889782] 8723bu: loading out-of-tree module taints kernel.
[ 2.890006] 8723bu: module verification failed: signature and/or required key missing - tainting kernel
[ 2.892124] RTL871X: module init start
[ 2.892125] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40
[ 2.892126] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40
[ 3.041402] RTL871X: rtw_ndev_init(wlan0)
[ 3.041574] usbcore: registered new interface driver rtl8723bu
[ 3.041574] RTL871X: module init ret=0
[ 3.156581] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170831/utaddress-247)
[ 3.156587] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.156597] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
[ 3.156601] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.156602] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247)
[ 3.156610] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
[ 3.156615] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.156616] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247)
[ 3.156620] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
[ 3.156623] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.156624] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.157082] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.157401] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 3.157402] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 3.157403] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 3.157404] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 3.157404] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 3.159744] asus_wmi: ASUS WMI generic driver loaded
[ 3.161010] usbcore: registered new interface driver usb-storage
[ 3.161890] asus_wmi: Initialization: 0x0
[ 3.161914] asus_wmi: BIOS WMI version: 0.9
[ 3.161956] asus_wmi: SFUN value: 0x0
[ 3.162414] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input6
[ 3.162530] asus_wmi: Number of fans: 1
[ 3.163059] usbcore: registered new interface driver uas
[ 3.171547] ums-realtek 1-1.2:1.0: USB Mass Storage device detected
[ 3.172598] random: crng init done
[ 3.172599] random: 7 urandom warning(s) missed due to ratelimiting
[ 3.175417] scsi host6: usb-storage 1-1.2:1.0
[ 3.175464] usbcore: registered new interface driver ums-realtek
[ 3.185671] Bluetooth: Core ver 2.22
[ 3.185681] NET: Registered protocol family 31
[ 3.185682] Bluetooth: HCI device and connection manager initialized
[ 3.185684] Bluetooth: HCI socket layer initialized
[ 3.185686] Bluetooth: L2CAP socket layer initialized
[ 3.185689] Bluetooth: SCO socket layer initialized
[ 3.193961] AVX2 version of gcm_enc/dec engaged.
[ 3.193962] AES CTR mode by8 optimization enabled
[ 3.205561] usbcore: registered new interface driver btusb
[ 3.234337] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 3.243952] intel_rapl: Found RAPL domain package
[ 3.243953] intel_rapl: Found RAPL domain core
[ 3.243954] intel_rapl: Found RAPL domain uncore
[ 3.243955] intel_rapl: Found RAPL domain dram
[ 3.251536] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 3.251538] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.251539] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.251540] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 3.251542] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
[ 3.251542] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 3.251544] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 3.251546] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 3.251547] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 3.258252] rtl8723bu 2-1.1:1.2 wlx0013efd002c3: renamed from wlan0
[ 3.261958] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
[ 3.261998] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
[ 3.262030] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 3.262067] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 3.264569] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 3.264632] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 3.264681] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 3.264716] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 3.264753] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 3.264783] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 3.264811] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[ 3.264844] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[ 4.200566] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 4.200772] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 4.204536] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 4.465652] Adding 760828k swap on /dev/sdc5. Priority:-2 extents:1 across:760828k FS
[ 4.667704] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.670827] systemd-journald[367]: Received request to flush runtime journal from PID 1
[ 4.687287] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.702938] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.739095] audit: type=1400 audit(1544882097.497:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=984 comm="apparmor_parser"
[ 4.739098] audit: type=1400 audit(1544882097.497:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=984 comm="apparmor_parser"
[ 4.739177] audit: type=1400 audit(1544882097.497:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=983 comm="apparmor_parser"
[ 4.739179] audit: type=1400 audit(1544882097.497:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=983 comm="apparmor_parser"
[ 4.739181] audit: type=1400 audit(1544882097.497:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=983 comm="apparmor_parser"
[ 4.739183] audit: type=1400 audit(1544882097.497:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=983 comm="apparmor_parser"
[ 4.739485] audit: type=1400 audit(1544882097.497:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=992 comm="apparmor_parser"
[ 4.739487] audit: type=1400 audit(1544882097.497:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=992 comm="apparmor_parser"
[ 4.739806] audit: type=1400 audit(1544882097.497:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=995 comm="apparmor_parser"
[ 4.828671] rfkill: input handler disabled
[ 5.007552] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 5.216009] Bluetooth: hci0: command 0x1001 tx timeout
[ 5.741402] RTL871X: RTW_ADAPTIVITY_EN_
[ 5.741403] AUTO, chplan:0x20, Regulation:0,0
[ 5.741404] RTL871X: RTW_ADAPTIVITY_MODE_
[ 5.741404] NORMAL
[ 6.442620] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 6.444392] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 6.698087] r8169 0000:03:00.0 enp3s0: link down
[ 6.698133] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 6.794983] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 6.949497] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.949498] Bluetooth: BNEP filters: protocol multicast
[ 6.949501] Bluetooth: BNEP socket layer initialized
[ 9.648034] RTL871X: rtw_set_802_11_connect(wlx0013efd002c3) fw_state=0x00000008
[ 9.752187] RTL871X: start auth
[ 9.754182] RTL871X: auth success, start assoc
[ 9.757191] RTL871X: rtw_cfg80211_indicate_connect(wlx0013efd002c3) BSS not found !!
[ 9.757197] RTL871X: assoc success
[ 9.764562] RTL871X: send eapol packet
[ 9.774510] RTL871X: send eapol packet
[ 9.774545] RTL871X: set pairwise key camid:4, addr:38:35:fb:f3:e5:d0, kid:0, type:AES
[ 9.774597] IPv6: ADDRCONF(NETDEV_CHANGE): wlx0013efd002c3: link becomes ready
[ 9.777532] RTL871X: set group key camid:5, addr:38:35:fb:f3:e5:d0, kid:1, type:AES
[ 12.007626] usbcore: deregistering interface driver ums-realtek
[ 12.717448] ums-realtek 1-1.2:1.0: USB Mass Storage device detected
[ 12.876851] scsi host6: usb-storage 1-1.2:1.0
[ 12.876942] usbcore: registered new interface driver ums-realtek
[ 13.276007] Bluetooth: hci0: HCI_OP_READ_LOCAL_VERSION failed (-110)
[ 13.889304] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 13.889499] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 13.891798] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 77.510370] usb 2-1.1: USB disconnect, device number 3
[ 77.510686] RTL871X: rtw_cmd_thread: DriverStopped(0) SurpriseRemoved(1) break at line 452
[ 77.540423] RTL871X: rtw_ndev_uninit(wlx0013efd002c3)
[ 77.600448] RTL871X: rtw_dev_unload: driver not in IPS
[ 77.828346] usb 2-1.1: new high-speed USB device number 4 using ehci-pci
[ 77.937231] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 77.937233] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 77.937234] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 77.937235] usb 2-1.1: Manufacturer: Realtek
[ 77.937235] usb 2-1.1: SerialNumber: 00E04C000001
[ 78.087343] RTL871X: rtw_ndev_init(wlan0)
[ 78.099556] rtl8723bu 2-1.1:1.2 wlx0013efd002c3: renamed from wlan0
[ 78.132790] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 78.873865] RTL871X: RTW_ADAPTIVITY_EN_
[ 78.873867] AUTO, chplan:0x20, Regulation:0,0
[ 78.873868] RTL871X: RTW_ADAPTIVITY_MODE_
[ 78.873868] NORMAL
[ 79.439143] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 79.491441] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 79.964376] Bluetooth: hci0: command 0x1001 tx timeout
[ 82.340756] RTL871X: rtw_set_802_11_connect(wlx0013efd002c3) fw_state=0x00000008
[ 82.355507] RTL871X: start auth
[ 82.357771] RTL871X: auth success, start assoc
[ 82.361040] RTL871X: rtw_cfg80211_indicate_connect(wlx0013efd002c3) BSS not found !!
[ 82.361047] RTL871X: assoc success
[ 82.369749] RTL871X: send eapol packet
[ 82.380712] RTL871X: send eapol packet
[ 82.380798] RTL871X: set pairwise key camid:4, addr:38:35:fb:f3:e5:d0, kid:0, type:AES
[ 82.380916] IPv6: ADDRCONF(NETDEV_CHANGE): wlx0013efd002c3: link becomes ready
[ 82.383866] RTL871X: set group key camid:5, addr:38:35:fb:f3:e5:d0, kid:1, type:AES
[ 88.028536] Bluetooth: hci0: HCI_OP_READ_LOCAL_VERSION failed (-110)
[ 1850.824249] usb 2-1.1: USB disconnect, device number 4
[ 1850.825082] RTL871X: rtw_cmd_thread: DriverStopped(0) SurpriseRemoved(1) break at line 452
[ 1850.840259] RTL871X: rtw_ndev_uninit(wlx0013efd002c3)
[ 1850.912274] RTL871X: rtw_dev_unload: driver not in IPS
[ 1851.136231] usb 2-1.1: new high-speed USB device number 5 using ehci-pci
[ 1851.245116] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 1851.245119] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1851.245121] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 1851.245123] usb 2-1.1: Manufacturer: Realtek
[ 1851.245124] usb 2-1.1: SerialNumber: 00E04C000001
[ 1851.395978] RTL871X: rtw_ndev_init(wlan0)
[ 1851.406006] rtl8723bu 2-1.1:1.2 wlx0013efd002c3: renamed from wlan0
[ 1851.438053] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 1852.173612] RTL871X: RTW_ADAPTIVITY_EN_
[ 1852.173614] AUTO, chplan:0x20, Regulation:0,0
[ 1852.173615] RTL871X: RTW_ADAPTIVITY_MODE_
[ 1852.173615] NORMAL
[ 1852.738942] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 1852.794508] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 1853.268248] Bluetooth: hci0: command 0x1001 tx timeout
[ 1855.648892] RTL871X: rtw_set_802_11_connect(wlx0013efd002c3) fw_state=0x00000008
[ 1855.750408] RTL871X: start auth
[ 1855.752520] RTL871X: auth success, start assoc
[ 1855.755907] RTL871X: rtw_cfg80211_indicate_connect(wlx0013efd002c3) BSS not found !!
[ 1855.755916] RTL871X: assoc success
[ 1855.770265] RTL871X: send eapol packet
[ 1855.779632] RTL871X: send eapol packet
[ 1855.779734] RTL871X: set pairwise key camid:4, addr:38:35:fb:f3:e5:d0, kid:0, type:AES
[ 1855.779900] IPv6: ADDRCONF(NETDEV_CHANGE): wlx0013efd002c3: link becomes ready
[ 1855.782996] RTL871X: set group key camid:5, addr:38:35:fb:f3:e5:d0, kid:1, type:AES
[ 1861.364375] Bluetooth: hci0: HCI_OP_READ_LOCAL_VERSION failed (-110)
[ 1981.896430] usb 2-1.1: USB disconnect, device number 5
[ 1981.897120] RTL871X: rtw_cmd_thread: DriverStopped(0) SurpriseRemoved(1) break at line 452
[ 1981.925593] RTL871X: rtw_ndev_uninit(wlx0013efd002c3)
[ 1981.989629] RTL871X: rtw_dev_unload: driver not in IPS
[ 1982.213598] usb 2-1.1: new high-speed USB device number 6 using ehci-pci
[ 1982.322389] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 1982.322395] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1982.322399] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 1982.322403] usb 2-1.1: Manufacturer: Realtek
[ 1982.322407] usb 2-1.1: SerialNumber: 00E04C000001
[ 1982.474019] RTL871X: rtw_ndev_init(wlan0)
[ 1982.485187] rtl8723bu 2-1.1:1.2 wlx0013efd002c3: renamed from wlan0
[ 1982.506912] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 1983.239000] RTL871X: RTW_ADAPTIVITY_EN_
[ 1983.239003] AUTO, chplan:0x20, Regulation:0,0
[ 1983.239004] RTL871X: RTW_ADAPTIVITY_MODE_
[ 1983.239004] NORMAL
[ 1983.852275] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 1983.893721] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 1984.341614] Bluetooth: hci0: command 0x1001 tx timeout
[ 1986.745890] RTL871X: rtw_set_802_11_connect(wlx0013efd002c3) fw_state=0x00000008
[ 1986.824542] RTL871X: start auth
[ 1986.826294] RTL871X: auth success, start assoc
[ 1986.829441] RTL871X: rtw_cfg80211_indicate_connect(wlx0013efd002c3) BSS not found !!
[ 1986.829459] RTL871X: assoc success
[ 1986.838702] RTL871X: send eapol packet
[ 1986.849781] RTL871X: send eapol packet
[ 1986.849891] RTL871X: set pairwise key camid:4, addr:38:35:fb:f3:e5:d0, kid:0, type:AES
[ 1986.850058] IPv6: ADDRCONF(NETDEV_CHANGE): wlx0013efd002c3: link becomes ready
[ 1986.852889] RTL871X: set group key camid:5, addr:38:35:fb:f3:e5:d0, kid:1, type:AES
[ 1992.437713] Bluetooth: hci0: HCI_OP_READ_LOCAL_VERSION failed (-110)
[ 6012.620658] usb 2-1.1: USB disconnect, device number 6
[ 6012.621058] RTL871X: rtw_cmd_thread: DriverStopped(0) SurpriseRemoved(1) break at line 452
[ 6012.649872] RTL871X: rtw_ndev_uninit(wlx0013efd002c3)
[ 6012.721954] RTL871X: rtw_dev_unload: driver not in IPS
[ 6012.945861] usb 2-1.1: new high-speed USB device number 7 using ehci-pci
[ 6013.054663] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 6013.054669] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6013.054674] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 6013.054678] usb 2-1.1: Manufacturer: Realtek
[ 6013.054681] usb 2-1.1: SerialNumber: 00E04C000001
[ 6013.206018] RTL871X: rtw_ndev_init(wlan0)
[ 6013.215164] rtl8723bu 2-1.1:1.2 wlx0013efd002c3: renamed from wlan0
[ 6013.265990] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 6013.999150] RTL871X: RTW_ADAPTIVITY_EN_
[ 6013.999153] AUTO, chplan:0x20, Regulation:0,0
[ 6013.999153] RTL871X: RTW_ADAPTIVITY_MODE_
[ 6013.999154] NORMAL
[ 6014.652581] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 6014.698235] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 6015.061796] Bluetooth: hci0: command 0x1001 tx timeout
[ 6017.557825] RTL871X: rtw_set_802_11_connect(wlx0013efd002c3) fw_state=0x00000008
[ 6017.658294] RTL871X: start auth
[ 6017.660046] RTL871X: auth success, start assoc
[ 6017.663811] RTL871X: rtw_cfg80211_indicate_connect(wlx0013efd002c3) BSS not found !!
[ 6017.663821] RTL871X: assoc success
[ 6017.672514] RTL871X: send eapol packet
[ 6017.683689] RTL871X: send eapol packet
[ 6017.683768] RTL871X: set pairwise key camid:4, addr:38:35:fb:f3:e5:d0, kid:0, type:AES
[ 6017.683899] IPv6: ADDRCONF(NETDEV_CHANGE): wlx0013efd002c3: link becomes ready
[ 6017.686785] RTL871X: set group key camid:5, addr:38:35:fb:f3:e5:d0, kid:1, type:AES
[ 6023.221530] Bluetooth: hci0: HCI_OP_READ_LOCAL_VERSION failed (-110)
[ 6520.269243] usb 2-1.1: USB disconnect, device number 7
[ 6520.270164] RTL871X: rtw_cmd_thread: DriverStopped(0) SurpriseRemoved(1) break at line 452
[ 6520.297959] RTL871X: rtw_ndev_uninit(wlx0013efd002c3)
[ 6520.374010] RTL871X: rtw_dev_unload: driver not in IPS
[ 6520.597931] usb 2-1.1: new high-speed USB device number 8 using ehci-pci
[ 6520.706687] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 6520.706689] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6520.706690] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 6520.706691] usb 2-1.1: Manufacturer: Realtek
[ 6520.706691] usb 2-1.1: SerialNumber: 00E04C000001
[ 6520.857542] RTL871X: rtw_ndev_init(wlan0)
[ 6520.868570] rtl8723bu 2-1.1:1.2 wlx0013efd002c3: renamed from wlan0
[ 6520.899864] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 6521.635188] RTL871X: RTW_ADAPTIVITY_EN_
[ 6521.635191] AUTO, chplan:0x20, Regulation:0,0
[ 6521.635191] RTL871X: RTW_ADAPTIVITY_MODE_
[ 6521.635192] NORMAL
[ 6522.336591] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 6522.396690] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 6522.733890] Bluetooth: hci0: command 0x1001 tx timeout
[ 6525.246978] RTL871X: rtw_set_802_11_connect(wlx0013efd002c3) fw_state=0x00000008
[ 6525.262580] RTL871X: start auth
[ 6525.264699] RTL871X: auth success, start assoc
[ 6525.267839] RTL871X: rtw_cfg80211_indicate_connect(wlx0013efd002c3) BSS not found !!
[ 6525.267843] RTL871X: assoc success
[ 6525.279934] RTL871X: send eapol packet
[ 6525.291540] RTL871X: send eapol packet
[ 6525.291581] RTL871X: set pairwise key camid:4, addr:38:35:fb:f3:e5:d0, kid:0, type:AES
[ 6525.291657] IPv6: ADDRCONF(NETDEV_CHANGE): wlx0013efd002c3: link becomes ready
[ 6525.294694] RTL871X: set group key camid:5, addr:38:35:fb:f3:e5:d0, kid:1, type:AES
[ 6530.861843] Bluetooth: hci0: HCI_OP_READ_LOCAL_VERSION failed (-110)
[ 6611.917287] usb 2-1.1: USB disconnect, device number 8
[ 6611.917764] RTL871X: rtw_cmd_thread: DriverStopped(0) SurpriseRemoved(1) break at line 452
[ 6611.953551] RTL871X: rtw_ndev_uninit(wlx0013efd002c3)
[ 6612.025659] RTL871X: rtw_dev_unload: driver not in IPS
[ 6612.249547] usb 2-1.1: new high-speed USB device number 9 using ehci-pci
[ 6612.358422] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 6612.358427] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6612.358431] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 6612.358435] usb 2-1.1: Manufacturer: Realtek
[ 6612.358438] usb 2-1.1: SerialNumber: 00E04C000001
[ 6612.510192] RTL871X: rtw_ndev_init(wlan0)
[ 6612.524468] rtl8723bu 2-1.1:1.2 wlx0013efd002c3: renamed from wlan0
[ 6612.556269] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 6613.290910] RTL871X: RTW_ADAPTIVITY_EN_
[ 6613.290914] AUTO, chplan:0x20, Regulation:0,0
[ 6613.290915] RTL871X: RTW_ADAPTIVITY_MODE_
[ 6613.290915] NORMAL
[ 6613.992105] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 6614.035292] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 6614.381512] Bluetooth: hci0: command 0x1001 tx timeout
[ 6616.881813] RTL871X: rtw_set_802_11_connect(wlx0013efd002c3) fw_state=0x00000008
[ 6616.911953] RTL871X: start auth
[ 6616.914197] RTL871X: auth success, start assoc
[ 6616.918342] RTL871X: rtw_cfg80211_indicate_connect(wlx0013efd002c3) BSS not found !!
[ 6616.918357] RTL871X: assoc success
[ 6616.931466] RTL871X: send eapol packet
[ 6616.942009] RTL871X: send eapol packet
[ 6616.942128] RTL871X: set pairwise key camid:4, addr:38:35:fb:f3:e5:d0, kid:0, type:AES
[ 6616.942325] IPv6: ADDRCONF(NETDEV_CHANGE): wlx0013efd002c3: link becomes ready
[ 6616.945175] RTL871X: set group key camid:5, addr:38:35:fb:f3:e5:d0, kid:1, type:AES
[ 6622.509484] Bluetooth: hci0: HCI_OP_READ_LOCAL_VERSION failed (-110)
[ 6992.333726] usb 2-1.1: USB disconnect, device number 9
[ 6992.334107] RTL871X: rtw_cmd_thread: DriverStopped(0) SurpriseRemoved(1) break at line 452
[ 6992.357786] RTL871X: rtw_ndev_uninit(wlx0013efd002c3)
[ 6992.433838] RTL871X: rtw_dev_unload: driver not in IPS
[ 6992.657780] usb 2-1.1: new high-speed USB device number 10 using ehci-pci
[ 6992.766571] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 6992.766575] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6992.766577] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 6992.766580] usb 2-1.1: Manufacturer: Realtek
[ 6992.766583] usb 2-1.1: SerialNumber: 00E04C000001
[ 6992.917679] RTL871X: rtw_ndev_init(wlan0)
[ 6992.927739] rtl8723bu 2-1.1:1.2 wlx0013efd002c3: renamed from wlan0
[ 6992.965253] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 6993.699064] RTL871X: RTW_ADAPTIVITY_EN_
[ 6993.699066] AUTO, chplan:0x20, Regulation:0,0
[ 6993.699066] RTL871X: RTW_ADAPTIVITY_MODE_
[ 6993.699067] NORMAL
[ 6994.340460] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 6994.385377] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 6994.797781] Bluetooth: hci0: command 0x1001 tx timeout
[ 6997.238880] RTL871X: rtw_set_802_11_connect(wlx0013efd002c3) fw_state=0x00000008
[ 6997.333732] RTL871X: start auth
[ 6997.335856] RTL871X: auth success, start assoc
[ 6997.339624] RTL871X: rtw_cfg80211_indicate_connect(wlx0013efd002c3) BSS not found !!
[ 6997.339637] RTL871X: assoc success
[ 6997.351558] RTL871X: send eapol packet
[ 6997.360239] RTL871X: send eapol packet
[ 6997.360324] RTL871X: set pairwise key camid:4, addr:38:35:fb:f3:e5:d0, kid:0, type:AES
[ 6997.360449] IPv6: ADDRCONF(NETDEV_CHANGE): wlx0013efd002c3: link becomes ready
[ 6997.363449] RTL871X: set group key camid:5, addr:38:35:fb:f3:e5:d0, kid:1, type:AES
[ 7002.925808] Bluetooth: hci0: HCI_OP_READ_LOCAL_VERSION failed (-110)
[ 7011.277745] usb 2-1.1: USB disconnect, device number 10
[ 7011.278204] RTL871X: rtw_cmd_thread: DriverStopped(0) SurpriseRemoved(1) break at line 452
[ 7011.297862] RTL871X: rtw_ndev_uninit(wlx0013efd002c3)
[ 7011.361954] RTL871X: rtw_dev_unload: driver not in IPS
[ 7011.585850] usb 2-1.1: new high-speed USB device number 11 using ehci-pci
[ 7011.694718] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 7011.694722] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7011.694725] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 7011.694728] usb 2-1.1: Manufacturer: Realtek
[ 7011.694731] usb 2-1.1: SerialNumber: 00E04C000001
[ 7011.845660] RTL871X: rtw_ndev_init(wlan0)
[ 7011.858775] rtl8723bu 2-1.1:1.2 wlx0013efd002c3: renamed from wlan0
[ 7011.892433] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 7012.627209] RTL871X: RTW_ADAPTIVITY_EN_
[ 7012.627211] AUTO, chplan:0x20, Regulation:0,0
[ 7012.627211] RTL871X: RTW_ADAPTIVITY_MODE_
[ 7012.627212] NORMAL
[ 7013.356648] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 7013.412151] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 7013.709850] Bluetooth: hci0: command 0x1001 tx timeout
[ 7016.262741] RTL871X: rtw_set_802_11_connect(wlx0013efd002c3) fw_state=0x00000008
[ 7016.277964] RTL871X: start auth
[ 7016.280085] RTL871X: auth success, start assoc
[ 7016.283349] RTL871X: rtw_cfg80211_indicate_connect(wlx0013efd002c3) BSS not found !!
[ 7016.283358] RTL871X: assoc success
[ 7016.293437] RTL871X: send eapol packet
[ 7016.303967] RTL871X: send eapol packet
[ 7016.304050] RTL871X: set pairwise key camid:4, addr:38:35:fb:f3:e5:d0, kid:0, type:AES
[ 7016.304183] IPv6: ADDRCONF(NETDEV_CHANGE): wlx0013efd002c3: link becomes ready
[ 7016.307467] RTL871X: set group key camid:5, addr:38:35:fb:f3:e5:d0, kid:1, type:AES
[ 7021.869879] Bluetooth: hci0: HCI_OP_READ_LOCAL_VERSION failed (-110)
[ 7465.840334] RTL871X: rtw_cmd_thread: DriverStopped(0) SurpriseRemoved(1) break at line 452
[ 7465.934236] usb 2-1.1: USB disconnect, device number 11
[ 7465.976373] RTL871X: rtw_ndev_uninit(wlx0013efd002c3)
[ 7466.044429] RTL871X: rtw_dev_unload: driver not in IPS
[ 7466.268330] usb 2-1.1: new high-speed USB device number 12 using ehci-pci
[ 7466.377193] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 7466.377195] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7466.377197] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 7466.377198] usb 2-1.1: Manufacturer: Realtek
[ 7466.377200] usb 2-1.1: SerialNumber: 00E04C000001
[ 7466.528310] RTL871X: rtw_ndev_init(wlan0)
[ 7466.541034] rtl8723bu 2-1.1:1.2 wlx0013efd002c3: renamed from wlan0
[ 7466.569995] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 7467.305690] RTL871X: RTW_ADAPTIVITY_EN_
[ 7467.305691] AUTO, chplan:0x20, Regulation:0,0
[ 7467.305692] RTL871X: RTW_ADAPTIVITY_MODE_
[ 7467.305692] NORMAL
[ 7467.871016] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 7467.916741] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 7468.400361] Bluetooth: hci0: command 0x1001 tx timeout
[ 7470.772460] RTL871X: rtw_set_802_11_connect(wlx0013efd002c3) fw_state=0x00000008
[ 7470.838343] RTL871X: start auth
[ 7470.840588] RTL871X: auth success, start assoc
[ 7470.843977] RTL871X: rtw_cfg80211_indicate_connect(wlx0013efd002c3) BSS not found !!
[ 7470.843986] RTL871X: assoc success
[ 7470.854726] RTL871X: send eapol packet
[ 7470.865177] RTL871X: send eapol packet
[ 7470.865259] RTL871X: set pairwise key camid:4, addr:38:35:fb:f3:e5:d0, kid:0, type:AES
[ 7470.865383] IPv6: ADDRCONF(NETDEV_CHANGE): wlx0013efd002c3: link becomes ready
[ 7470.868326] RTL871X: set group key camid:5, addr:38:35:fb:f3:e5:d0, kid:1, type:AES
[ 7476.528434] Bluetooth: hci0: HCI_OP_READ_LOCAL_VERSION failed (-110)
[ 7792.590420] usb 2-1.1: USB disconnect, device number 12
[ 7792.591341] RTL871X: rtw_cmd_thread: DriverStopped(1) SurpriseRemoved(1) break at line 452
[ 7792.634833] RTL871X: rtw_ndev_uninit(wlx0013efd002c3)
[ 7792.706898] RTL871X: rtw_dev_unload: driver not in IPS
[ 7792.930805] usb 2-1.1: new high-speed USB device number 13 using ehci-pci
[ 7793.039667] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 7793.039670] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7793.039672] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 7793.039674] usb 2-1.1: Manufacturer: Realtek
[ 7793.039676] usb 2-1.1: SerialNumber: 00E04C000001
[ 7793.190147] RTL871X: rtw_ndev_init(wlan0)
[ 7793.201414] rtl8723bu 2-1.1:1.2 wlx0013efd002c3: renamed from wlan0
[ 7793.237355] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 7793.972163] RTL871X: RTW_ADAPTIVITY_EN_
[ 7793.972165] AUTO, chplan:0x20, Regulation:0,0
[ 7793.972165] RTL871X: RTW_ADAPTIVITY_MODE_
[ 7793.972166] NORMAL
[ 7794.585571] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 7794.638101] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 7795.058816] Bluetooth: hci0: command 0x1001 tx timeout
[ 7797.491438] RTL871X: rtw_set_802_11_connect(wlx0013efd002c3) fw_state=0x00000008
[ 7797.601820] RTL871X: start auth
[ 7797.604068] RTL871X: auth success, start assoc
[ 7797.607077] RTL871X: rtw_cfg80211_indicate_connect(wlx0013efd002c3) BSS not found !!
[ 7797.607084] RTL871X: assoc success
[ 7797.615560] RTL871X: send eapol packet
[ 7797.626729] RTL871X: send eapol packet
[ 7797.626774] RTL871X: set pairwise key camid:4, addr:38:35:fb:f3:e5:d0, kid:0, type:AES
[ 7797.626843] IPv6: ADDRCONF(NETDEV_CHANGE): wlx0013efd002c3: link becomes ready
[ 7797.629940] RTL871X: set group key camid:5, addr:38:35:fb:f3:e5:d0, kid:1, type:AES
[ 7803.186885] Bluetooth: hci0: HCI_OP_READ_LOCAL_VERSION failed (-110)
[ 7861.966639] usb 2-1.1: USB disconnect, device number 13
[ 7861.966940] RTL871X: rtw_cmd_thread: DriverStopped(0) SurpriseRemoved(1) break at line 452
[ 7862.011407] RTL871X: rtw_ndev_uninit(wlx0013efd002c3)
[ 7862.083472] RTL871X: rtw_dev_unload: driver not in IPS
[ 7862.307385] usb 2-1.1: new high-speed USB device number 14 using ehci-pci
[ 7862.416246] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 7862.416251] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7862.416254] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 7862.416257] usb 2-1.1: Manufacturer: Realtek
[ 7862.416260] usb 2-1.1: SerialNumber: 00E04C000001
[ 7862.567509] RTL871X: rtw_ndev_init(wlan0)
[ 7862.583181] rtl8723bu 2-1.1:1.2 wlx0013efd002c3: renamed from wlan0
[ 7862.608596] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 7863.344736] RTL871X: RTW_ADAPTIVITY_EN_
[ 7863.344739] AUTO, chplan:0x20, Regulation:0,0
[ 7863.344739] RTL871X: RTW_ADAPTIVITY_MODE_
[ 7863.344740] NORMAL
[ 7863.758489] usb 2-1.1: USB disconnect, device number 14
[ 7863.963588] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 7864.017371] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 7864.018009] RTL871X: rtw_cmd_thread: DriverStopped(0) SurpriseRemoved(1) break at line 452
[ 7864.435394] Bluetooth: hci0: command 0x1001 tx timeout
[ 7872.563450] Bluetooth: hci0: HCI_OP_READ_LOCAL_VERSION failed (-110)
[ 7872.583465] RTL871X: rtw_ndev_uninit(wlx0013efd002c3)
[ 7872.659516] RTL871X: rtw_dev_unload: driver not in IPS
[ 7872.883476] usb 2-1.1: new high-speed USB device number 15 using ehci-pci
[ 7872.992380] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 7872.992385] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7872.992388] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 7872.992390] usb 2-1.1: Manufacturer: Realtek
[ 7872.992393] usb 2-1.1: SerialNumber: 00E04C000001
[ 7873.143250] RTL871X: rtw_ndev_init(wlan0)
[ 7873.152630] rtl8723bu 2-1.1:1.2 wlx0013efd002c3: renamed from wlan0
[ 7873.190160] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 7873.924872] RTL871X: RTW_ADAPTIVITY_EN_
[ 7873.924874] AUTO, chplan:0x20, Regulation:0,0
[ 7873.924875] RTL871X: RTW_ADAPTIVITY_MODE_
[ 7873.924876] NORMAL
[ 7874.430161] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 7874.480459] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 7874.995478] Bluetooth: hci0: command 0x1001 tx timeout
[ 7877.332264] RTL871X: rtw_set_802_11_connect(wlx0013efd002c3) fw_state=0x00000008
[ 7877.372507] RTL871X: start auth
[ 7877.374001] RTL871X: auth success, start assoc
[ 7877.377138] RTL871X: rtw_cfg80211_indicate_connect(wlx0013efd002c3) BSS not found !!
[ 7877.377145] RTL871X: assoc success
[ 7877.385339] RTL871X: send eapol packet
[ 7877.400940] RTL871X: send eapol packet
[ 7877.400982] RTL871X: set pairwise key camid:4, addr:38:35:fb:f3:e5:d0, kid:0, type:AES
[ 7877.401032] IPv6: ADDRCONF(NETDEV_CHANGE): wlx0013efd002c3: link becomes ready
[ 7877.404024] RTL871X: set group key camid:5, addr:38:35:fb:f3:e5:d0, kid:1, type:AES
[ 7883.059545] Bluetooth: hci0: HCI_OP_READ_LOCAL_VERSION failed (-110)
[ 7928.866340] RTL871X: rtw_cmd_thread: DriverStopped(0) SurpriseRemoved(1) break at line 480
[ 7929.038738] usb 2-1.1: USB disconnect, device number 15
[ 7929.067937] RTL871X: rtw_ndev_uninit(wlx0013efd002c3)
[ 7929.127993] RTL871X: rtw_dev_unload: driver not in IPS
[ 7929.351952] usb 2-1.1: new high-speed USB device number 16 using ehci-pci
[ 7929.460818] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 7929.460824] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7929.460828] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 7929.460831] usb 2-1.1: Manufacturer: Realtek
[ 7929.460834] usb 2-1.1: SerialNumber: 00E04C000001
[ 7929.614194] RTL871X: rtw_ndev_init(wlan0)
[ 7929.623594] rtl8723bu 2-1.1:1.2 wlx0013efd002c3: renamed from wlan0
[ 7929.644884] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 7930.377182] RTL871X: RTW_ADAPTIVITY_EN_
[ 7930.377184] AUTO, chplan:0x20, Regulation:0,0
[ 7930.377185] RTL871X: RTW_ADAPTIVITY_MODE_
[ 7930.377185] NORMAL
[ 7931.030701] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 7931.074564] IPv6: ADDRCONF(NETDEV_UP): wlx0013efd002c3: link is not ready
[ 7931.475940] Bluetooth: hci0: command 0x1001 tx timeout
[ 7933.924322] RTL871X: rtw_set_802_11_connect(wlx0013efd002c3) fw_state=0x00000008
[ 7934.000613] RTL871X: start auth
[ 7934.003358] RTL871X: auth success, start assoc
[ 7934.006622] RTL871X: rtw_cfg80211_indicate_connect(wlx0013efd002c3) BSS not found !!
[ 7934.006635] RTL871X: assoc success
[ 7934.017216] RTL871X: send eapol packet
[ 7934.027438] RTL871X: send eapol packet
[ 7934.027526] RTL871X: set pairwise key camid:4, addr:38:35:fb:f3:e5:d0, kid:0, type:AES
[ 7934.027725] IPv6: ADDRCONF(NETDEV_CHANGE): wlx0013efd002c3: link becomes ready
[ 7934.030693] RTL871X: set group key camid:5, addr:38:35:fb:f3:e5:d0, kid:1, type:AES
[ 7939.636022] Bluetooth: hci0: HCI_OP_READ_LOCAL_VERSION failed (-110)
coeurnoir@Asgard:~$
ou en résumé :
coeurnoir@Asgard:~$ dmesg | grep usb
[ 0.077854] usbcore: registered new interface driver usbfs
[ 0.077854] usbcore: registered new interface driver hub
[ 0.077854] usbcore: registered new device driver usb
[ 0.704053] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.704054] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.704055] usb usb1: Product: EHCI Host Controller
[ 0.704056] usb usb1: Manufacturer: Linux 4.15.0-42-generic ehci_hcd
[ 0.704057] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.724052] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.724054] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.724054] usb usb2: Product: EHCI Host Controller
[ 0.724055] usb usb2: Manufacturer: Linux 4.15.0-42-generic ehci_hcd
[ 0.724056] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.040004] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.060005] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.196462] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.196463] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.216462] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.216463] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.484022] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.508021] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[ 1.599175] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52f
[ 1.599176] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.599177] usb 1-1.1: Product: USB Receiver
[ 1.599178] usb 1-1.1: Manufacturer: Logitech
[ 1.605849] usbcore: registered new interface driver usbhid
[ 1.605849] usbhid: USB HID core driver
[ 1.606900] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C52F.0001/input/input4
[ 1.606957] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input0
[ 1.607071] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52F.0002/input/input5
[ 1.620899] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 1.620901] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.620902] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 1.620903] usb 2-1.1: Manufacturer: Realtek
[ 1.620903] usb 2-1.1: SerialNumber: 00E04C000001
[ 1.664168] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input1
[ 1.680022] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[ 2.407300] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0158
[ 2.407301] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.407302] usb 1-1.2: Product: USB2.0-CRW
[ 2.407303] usb 1-1.2: Manufacturer: Generic
[ 2.407304] usb 1-1.2: SerialNumber: 20060413092100000
[ 3.041574] usbcore: registered new interface driver rtl8723bu
[ 3.161010] usbcore: registered new interface driver usb-storage
[ 3.163059] usbcore: registered new interface driver uas
[ 3.175417] scsi host6: usb-storage 1-1.2:1.0
[ 3.175464] usbcore: registered new interface driver ums-realtek
[ 3.205561] usbcore: registered new interface driver btusb
[ 4.739806] audit: type=1400 audit(1544882097.497:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=995 comm="apparmor_parser"
[ 12.007626] usbcore: deregistering interface driver ums-realtek
[ 12.876851] scsi host6: usb-storage 1-1.2:1.0
[ 12.876942] usbcore: registered new interface driver ums-realtek
[ 77.510370] usb 2-1.1: USB disconnect, device number 3
[ 77.828346] usb 2-1.1: new high-speed USB device number 4 using ehci-pci
[ 77.937231] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 77.937233] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 77.937234] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 77.937235] usb 2-1.1: Manufacturer: Realtek
[ 77.937235] usb 2-1.1: SerialNumber: 00E04C000001
[ 1850.824249] usb 2-1.1: USB disconnect, device number 4
[ 1851.136231] usb 2-1.1: new high-speed USB device number 5 using ehci-pci
[ 1851.245116] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 1851.245119] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1851.245121] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 1851.245123] usb 2-1.1: Manufacturer: Realtek
[ 1851.245124] usb 2-1.1: SerialNumber: 00E04C000001
[ 1981.896430] usb 2-1.1: USB disconnect, device number 5
[ 1982.213598] usb 2-1.1: new high-speed USB device number 6 using ehci-pci
[ 1982.322389] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 1982.322395] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1982.322399] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 1982.322403] usb 2-1.1: Manufacturer: Realtek
[ 1982.322407] usb 2-1.1: SerialNumber: 00E04C000001
[ 6012.620658] usb 2-1.1: USB disconnect, device number 6
[ 6012.945861] usb 2-1.1: new high-speed USB device number 7 using ehci-pci
[ 6013.054663] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 6013.054669] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6013.054674] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 6013.054678] usb 2-1.1: Manufacturer: Realtek
[ 6013.054681] usb 2-1.1: SerialNumber: 00E04C000001
[ 6520.269243] usb 2-1.1: USB disconnect, device number 7
[ 6520.597931] usb 2-1.1: new high-speed USB device number 8 using ehci-pci
[ 6520.706687] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 6520.706689] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6520.706690] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 6520.706691] usb 2-1.1: Manufacturer: Realtek
[ 6520.706691] usb 2-1.1: SerialNumber: 00E04C000001
[ 6611.917287] usb 2-1.1: USB disconnect, device number 8
[ 6612.249547] usb 2-1.1: new high-speed USB device number 9 using ehci-pci
[ 6612.358422] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 6612.358427] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6612.358431] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 6612.358435] usb 2-1.1: Manufacturer: Realtek
[ 6612.358438] usb 2-1.1: SerialNumber: 00E04C000001
[ 6992.333726] usb 2-1.1: USB disconnect, device number 9
[ 6992.657780] usb 2-1.1: new high-speed USB device number 10 using ehci-pci
[ 6992.766571] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 6992.766575] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6992.766577] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 6992.766580] usb 2-1.1: Manufacturer: Realtek
[ 6992.766583] usb 2-1.1: SerialNumber: 00E04C000001
[ 7011.277745] usb 2-1.1: USB disconnect, device number 10
[ 7011.585850] usb 2-1.1: new high-speed USB device number 11 using ehci-pci
[ 7011.694718] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 7011.694722] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7011.694725] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 7011.694728] usb 2-1.1: Manufacturer: Realtek
[ 7011.694731] usb 2-1.1: SerialNumber: 00E04C000001
[ 7465.934236] usb 2-1.1: USB disconnect, device number 11
[ 7466.268330] usb 2-1.1: new high-speed USB device number 12 using ehci-pci
[ 7466.377193] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 7466.377195] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7466.377197] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 7466.377198] usb 2-1.1: Manufacturer: Realtek
[ 7466.377200] usb 2-1.1: SerialNumber: 00E04C000001
[ 7792.590420] usb 2-1.1: USB disconnect, device number 12
[ 7792.930805] usb 2-1.1: new high-speed USB device number 13 using ehci-pci
[ 7793.039667] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 7793.039670] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7793.039672] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 7793.039674] usb 2-1.1: Manufacturer: Realtek
[ 7793.039676] usb 2-1.1: SerialNumber: 00E04C000001
[ 7861.966639] usb 2-1.1: USB disconnect, device number 13
[ 7862.307385] usb 2-1.1: new high-speed USB device number 14 using ehci-pci
[ 7862.416246] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 7862.416251] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7862.416254] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 7862.416257] usb 2-1.1: Manufacturer: Realtek
[ 7862.416260] usb 2-1.1: SerialNumber: 00E04C000001
[ 7863.758489] usb 2-1.1: USB disconnect, device number 14
[ 7872.883476] usb 2-1.1: new high-speed USB device number 15 using ehci-pci
[ 7872.992380] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 7872.992385] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7872.992388] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 7872.992390] usb 2-1.1: Manufacturer: Realtek
[ 7872.992393] usb 2-1.1: SerialNumber: 00E04C000001
[ 7929.038738] usb 2-1.1: USB disconnect, device number 15
[ 7929.351952] usb 2-1.1: new high-speed USB device number 16 using ehci-pci
[ 7929.460818] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 7929.460824] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7929.460828] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 7929.460831] usb 2-1.1: Manufacturer: Realtek
[ 7929.460834] usb 2-1.1: SerialNumber: 00E04C000001
coeurnoir@Asgard:~$
Comment tester / m'assurer du bon fonctionnement des ports USB de cette tour ( les connectiques sur CM ont l'air ok ) ?
Ce qui me pousse à croire qu'il s'agit d'un problème matériel :
⋅ même souci sur 16.04 et 18.04,
⋅ j'ai aussi de temps en temps des soucis avec la souris sans fil qui ne répond plus de courts instants ( elle utilise aussi un port usb )
⋅ le wifi a fonctionné plusieurs semaines / mois plutôt bien…
Après c'est peut-être le dongle wifi/bt en lui-même qui est en train de rendre l'âme.
Bref comment « cerner » l'origine de ces USB disconnect ? L'utilisation de ehci-pci est-elle cohérente ( c'est réglable dans le bios il me semble ça ) ?
