Salut,
Voici le retour de la commande :
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MQ01ABD...
Device Model: TOSHIBA MQ01ABD075
Serial Number: Z3MAPVPDT
LU WWN Device Id: 5 000039 532608dc2
Firmware Version: AX0A4M
User Capacity: 750 156 374 016 bytes [750 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Dec 20 19:34:35 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 112) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 159) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1670
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 1789
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 32
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 084 084 000 Old_age Always - 6403
10 Spin_Retry_Count 0x0033 135 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1577
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 113
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 18
193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 19459
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 39 (Min/Max 6/48)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 4
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 80
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 9
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0
222 Loaded_Hours 0x0032 086 086 000 Old_age Always - 5835
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 190
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 46563 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 46563 occurred at disk power-on lifetime: 6399 hours (266 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 78 f0 6a 8b 40 Error: UNC at LBA = 0x008b6af0 = 9136880
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 78 f0 6a 8b 40 00 00:01:48.338 READ FPDMA QUEUED
60 08 70 90 67 8d 40 00 00:01:48.338 READ FPDMA QUEUED
60 e0 68 28 5b 73 40 00 00:01:48.338 READ FPDMA QUEUED
61 08 60 60 e5 14 40 00 00:01:48.338 WRITE FPDMA QUEUED
61 08 58 40 dd 14 40 00 00:01:48.338 WRITE FPDMA QUEUED
Error 46562 occurred at disk power-on lifetime: 6399 hours (266 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 e0 f0 6a 8b 40 Error: WP at LBA = 0x008b6af0 = 9136880
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 a0 48 48 e5 5c 40 00 00:01:47.784 WRITE FPDMA QUEUED
61 08 40 40 dd 14 40 00 00:01:47.784 WRITE FPDMA QUEUED
61 08 38 60 e5 14 40 00 00:01:47.784 WRITE FPDMA QUEUED
60 e0 30 28 5b 73 40 00 00:01:46.963 READ FPDMA QUEUED
60 08 28 90 67 8d 40 00 00:01:44.553 READ FPDMA QUEUED
Error 46561 occurred at disk power-on lifetime: 6399 hours (266 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 50 f0 6a 8b 40 Error: UNC at LBA = 0x008b6af0 = 9136880
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 50 f0 6a 8b 40 00 00:01:38.960 READ FPDMA QUEUED
60 00 48 00 b1 89 40 00 00:01:38.960 READ FPDMA QUEUED
61 08 40 a0 bd 0d 40 00 00:01:38.960 WRITE FPDMA QUEUED
ea 00 00 00 00 00 a0 00 00:01:38.960 FLUSH CACHE EXT
ea 00 00 00 00 00 a0 00 00:01:38.931 FLUSH CACHE EXT
Error 46560 occurred at disk power-on lifetime: 6399 hours (266 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 68 f0 6a 8b 40 Error: WP at LBA = 0x008b6af0 = 9136880
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 28 d0 c0 e4 5c 40 00 00:01:35.736 WRITE FPDMA QUEUED
60 08 c8 48 ed cc 40 00 00:01:35.087 READ FPDMA QUEUED
60 08 c0 18 4f cd 40 00 00:01:35.086 READ FPDMA QUEUED
60 08 b8 38 4f cd 40 00 00:01:35.086 READ FPDMA QUEUED
60 08 b0 48 4f cd 40 00 00:01:35.086 READ FPDMA QUEUED
Error 46559 occurred at disk power-on lifetime: 6399 hours (266 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 f0 f0 6a 8b 40 Error: WP at LBA = 0x008b6af0 = 9136880
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 e8 00 90 14 40 00 00:44:28.603 WRITE FPDMA QUEUED
61 28 e0 00 88 11 40 00 00:44:28.603 WRITE FPDMA QUEUED
61 00 d8 00 84 11 40 00 00:44:28.603 WRITE FPDMA QUEUED
61 00 d0 00 80 11 40 00 00:44:28.603 WRITE FPDMA QUEUED
61 e8 c8 00 e4 10 40 00 00:44:28.603 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 00% 6402 382320165
# 2 Short offline Completed without error 00% 6399 -
# 3 Short offline Completed without error 00% 6252 -
# 4 Short offline Completed without error 00% 6247 -
# 5 Short offline Completed without error 00% 6247 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Merci de ta réponse ! 🙂
