$ sudo smartctl -s on -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-45-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA (AF)
Device Model: WDC WD10JPVT-75A1YT0
Serial Number: WX61C62C5764
LU WWN Device Id: 5 0014ee 20743de7f
Firmware Version: 01.01A01
User Capacity: 1000204886016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sun Feb 3 09:24:15 2019 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (16800) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 183) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x70b5) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 1806
3 Spin_Up_Time 0x0027 192 181 021 Pre-fail Always - 1366
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1399
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 072 072 000 Old_age Always - 20913
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1088
191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 5130
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 388
193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 883095
194 Temperature_Celsius 0x0022 115 089 000 Old_age Always - 32
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 2
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 14
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
240 Head_Flying_Hours 0x0032 078 078 000 Old_age Always - 16565
241 Total_LBAs_Written 0x0032 200 200 000 Old_age Always - 34426368157
242 Total_LBAs_Read 0x0032 200 200 000 Old_age Always - 51802291463
254 Free_Fall_Sensor 0x0032 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 20905 1656949040
# 2 Short offline Completed: read failure 90% 4005 43087056
# 3 Short offline Completed: read failure 90% 4004 43087056
# 4 Short offline Completed: read failure 90% 3986 260922656
# 5 Extended offline Completed: read failure 90% 3958 260922656
# 6 Short offline Completed: read failure 90% 3958 260922656
# 7 Short offline Completed: read failure 90% 3958 260922656
# 8 Short offline Completed: read failure 90% 3958 260922656
# 9 Short offline Completed: read failure 90% 3957 260922656
#10 Short offline Completed: read failure 90% 3957 260922656
#11 Short offline Completed: read failure 90% 3957 260922656
#12 Short offline Completed: read failure 90% 3957 260922656
#13 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
j’aimerais redimensionner la partition
boucebci@boucebci-SATELLITE-C55D-C:~$ sudo lsblk -o name,fstype,label,size,mountpoint | grep -v loop
[sudo] Mot de passe de boucebci :
NAME FSTYPE LABEL SIZE MOUNTPOINT
sda 931,5G
└─sda1 ext4 931,5G /
sr0 1024M
