La commande me donne ceci ...
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.18.0-10-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar SE Serial ATA
Device Model: WDC WD2500JS-60MHB1
Serial Number: WD-WCANK1928577
Firmware Version: 10.02E02
User Capacity: 250059350016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Mon Feb 25 19:35:19 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 8280) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 96) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 1
3 Spin_Up_Time 0x0003 193 172 021 Pre-fail Always - 5341
4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5343
5 Reallocated_Sector_Ct 0x0033 196 196 140 Pre-fail Always - 25
7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 063 063 000 Old_age Always - 27280
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 095 095 000 Old_age Always - 5215
190 Airflow_Temperature_Cel 0x0022 042 008 045 Old_age Always FAILING_NOW 58
194 Temperature_Celsius 0x0022 092 058 000 Old_age Always - 58
196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 1
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 1571 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1571 occurred at disk power-on lifetime: 27280 hours (1136 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 00 01 08 00 e0 Error: AMNF at LBA = 0x00000801 = 2049
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 08 00 00 00 00:03:46.876 READ DMA
ec 00 00 00 00 00 00 00 00:03:46.874 IDENTIFY DEVICE
ef 03 45 00 00 00 00 00 00:03:46.874 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 00 00 00:03:46.871 IDENTIFY DEVICE
c8 00 08 00 08 00 00 00 00:03:44.905 READ DMA
Error 1570 occurred at disk power-on lifetime: 27280 hours (1136 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 01 08 00 e0 Error: UNC at LBA = 0x00000801 = 2049
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 08 00 00 00 00:03:44.905 READ DMA
25 00 08 60 4d 1c 1d 00 00:03:44.905 READ DMA EXT
25 00 08 b8 55 1c 1d 00 00:03:44.898 READ DMA EXT
25 00 08 90 55 1c 1d 00 00:03:44.897 READ DMA EXT
25 00 08 a0 55 1c 1d 00 00:03:44.894 READ DMA EXT
Error 1569 occurred at disk power-on lifetime: 27280 hours (1136 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 01 08 00 e0 Error: UNC at LBA = 0x00000801 = 2049
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 08 00 00 00 00:02:59.971 READ DMA
ec 00 00 00 00 00 00 00 00:02:59.968 IDENTIFY DEVICE
ef 03 45 00 00 00 00 00 00:02:59.968 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 00 00 00:02:59.966 IDENTIFY DEVICE
c8 00 08 00 08 00 00 00 00:02:57.976 READ DMA
Error 1568 occurred at disk power-on lifetime: 27280 hours (1136 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 00 01 08 00 e0 Error: AMNF at LBA = 0x00000801 = 2049
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 08 00 00 00 00:02:57.976 READ DMA
25 00 08 60 4d 1c 1d 00 00:02:57.971 READ DMA EXT
25 00 08 b8 55 1c 1d 00 00:02:57.971 READ DMA EXT
25 00 08 90 55 1c 1d 00 00:02:57.971 READ DMA EXT
25 00 08 a0 55 1c 1d 00 00:02:57.970 READ DMA EXT
Error 1567 occurred at disk power-on lifetime: 27280 hours (1136 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 01 08 00 e0 Error: UNC at LBA = 0x00000801 = 2049
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 08 00 00 00 00:02:55.770 READ DMA
ec 00 00 00 00 00 00 00 00:02:55.764 IDENTIFY DEVICE
ef 03 45 00 00 00 00 00 00:02:55.764 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 00 00 00:02:55.762 IDENTIFY DEVICE
c8 00 08 00 08 00 00 00 00:02:53.856 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Conveyance offline Completed: read failure 90% 27280 2049
# 2 Short offline Completed: read failure 70% 27280 2049
# 3 Extended offline Completed: read failure 90% 27280 2049
# 4 Short captive Completed: read failure 70% 27270 2049
# 5 Short offline Completed without error 00% 25855 -
# 6 Short offline Aborted by host 60% 25788 -
# 7 Short offline Completed without error 00% 21214 -
# 8 Short offline Completed without error 00% 1412 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
