Ce site est optimisé pour être consulté depuis un navigateur moderne dans lequel JavaScript est activé.

Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1

kalimeth

Voila les retours :

ben@ben-Selecline-notebook-10-1:~$ lspci
00:00.0 Host bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register (rev 0f)
00:02.0 VGA compatible controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display (rev 0f)
00:14.0 USB controller: Intel Corporation Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI (rev 0f)
00:1a.0 Encryption controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine (rev 0f)
00:1f.0 ISA bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit (rev 0f)
ben@ben-Selecline-notebook-10-1:~$

ben@ben-Selecline-notebook-10-1:~$ lshw
ATTENTION: ce programme devrait être lancé en tant que super-utilisateur.
ben-selecline-notebook-10-1 
    description: Computer
    bits: 64 bits
    fonctionnalités: smp vsyscall32
  *-core
       description: Motherboard
       identifiant matériel: 0
     *-memory
          description: Mémoire système
          identifiant matériel: 0
          taille: 921MiB
     *-cpu
          produit: Intel(R) Atom(TM) CPU  Z3735G @ 1.33GHz
          fabriquant: Intel Corp.
          identifiant matériel: 1
          information bus: cpu@0
          taille: 1795MHz
          capacité: 1832MHz
          bits: 64 bits
          fonctionnalités: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch epb pti tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms dtherm ida arat cpufreq
     *-pci
          description: Host bridge
          produit: Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register
          fabriquant: Intel Corporation
          identifiant matériel: 100
          information bus: pci@0000:00:00.0
          version: 0f
          bits: 32 bits
          horloge: 33MHz
          configuration: driver=iosf_mbi_pci
          ressources: irq:0
        *-display
             description: VGA compatible controller
             produit: Atom Processor Z36xxx/Z37xxx Series Graphics & Display
             fabriquant: Intel Corporation
             identifiant matériel: 2
             information bus: pci@0000:00:02.0
             version: 0f
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: vga_controller bus_master cap_list rom
             configuration: driver=i915 latency=0
             ressources: irq:81 mémoire:50000000-503fffff mémoire:40000000-4fffffff portE/S:1000(taille=8) mémoire:c0000-dffff
        *-usb
             description: USB controller
             produit: Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI
             fabriquant: Intel Corporation
             identifiant matériel: 14
             information bus: pci@0000:00:14.0
             version: 0f
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: xhci bus_master cap_list
             configuration: driver=xhci_hcd latency=0
             ressources: irq:29 mémoire:50800000-5080ffff
        *-generic
             description: Encryption controller
             produit: Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine
             fabriquant: Intel Corporation
             identifiant matériel: 1a
             information bus: pci@0000:00:1a.0
             version: 0f
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: bus_master cap_list
             configuration: driver=mei_txe latency=0
             ressources: irq:74 mémoire:50700000-507fffff mémoire:50600000-506fffff
        *-isa
             description: ISA bridge
             produit: Atom Processor Z36xxx/Z37xxx Series Power Control Unit
             fabriquant: Intel Corporation
             identifiant matériel: 1f
             information bus: pci@0000:00:1f.0
             version: 0f
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: isa bus_master cap_list
             configuration: driver=lpc_ich latency=0
             ressources: irq:0
  *-network
       description: Interface réseau sans fil
       identifiant matériel: 1
       nom logique: wlan0
       numéro de série: a0:2c:36:58:b9:c1
       fonctionnalités: ethernet physical wireless
       configuration: broadcast=yes driver=rtl8723bs ip=192.168.1.21 multicast=yes wireless=IEEE 802.11bgn
ATTENTION: les informations sont potentiellement incomplètes ou erronées, vous devriez lancer ce programme en tant que super-utilisateur.
ben@ben-Selecline-notebook-10-1:~$

diesel

En résultat du lspci, ce n'est pas normal que tu n'aies que ça (et je trouve qu'il en manque aussi beaucoup dans le résultat du lshw).

Essaye avec

sudo lspci
sudo lshw

Amicalement.

Jean-Marie

diesel

Et donne nous aussi le résultat de

grep "es8316" /lib/modules/$(uname -a)/modules.alias

[EDIT] En fait, la bonne commande est :

grep "es8316" /lib/modules/$(uname -r)/modules.alias

[/EDIT]

Amicalement.

Jean-Marie

kalimeth

Ok, je te donne les retours :

ben@ben-Selecline-notebook-10-1:~$ sudo lspci
[sudo] Mot de passe de ben : 
00:00.0 Host bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register (rev 0f)
00:02.0 VGA compatible controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display (rev 0f)
00:14.0 USB controller: Intel Corporation Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI (rev 0f)
00:1a.0 Encryption controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine (rev 0f)
00:1f.0 ISA bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit (rev 0f)
ben@ben-Selecline-notebook-10-1:~$

ben@ben-Selecline-notebook-10-1:~$ sudo lshw
ben-selecline-notebook-10-1 
    description: Ordinateur Bloc-notes
    produit: Selecline notebook 10,1" (Type1 - SKU0)
    fabriquant: Auchan - SNCOIA
    version: 1.0
    numéro de série: Type1 - 123456789
    bits: 64 bits
    fonctionnalités: smbios-2.7 dmi-2.7 smp vsyscall32
    configuration: boot=normal chassis=notebook family=Type1 - Family sku=Type1 - SKU0 uuid=78563412-3412-7856-90AB-CDDEEFAABBCC
  *-core
       description: Carte mère
       produit: Selecline notebook 10,1"
       fabriquant: Auchan - SNCOIA
       identifiant matériel: 0
       version: 1.0
       numéro de série: Type2 - Board Serial Number
       emplacement: Type2 - Board Chassis Location
     *-firmware
          description: BIOS
          fabriquant: INSYDE Corp.
          identifiant matériel: 0
          version: SNCOIA.54450053.AUO.09
          date: 11/21/2016
          taille: 64KiB
          capacité: 576KiB
          fonctionnalités: pci upgrade shadowing cdboot bootselect edd int9keyboard int14serial int17printer int10video acpi usb zipboot biosbootspecification netboot
     *-cpu
          description: CPU
          produit: Intel(R) Atom(TM) CPU  Z3735G @ 1.33GHz
          fabriquant: Intel Corp.
          identifiant matériel: 4
          information bus: cpu@0
          version: Intel(R) Atom(TM) CPU  Z3735G @ 1.33GHz
          emplacement: CPU 1
          taille: 741MHz
          capacité: 1832MHz
          bits: 64 bits
          horloge: 83MHz
          fonctionnalités: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch epb pti tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms dtherm ida arat cpufreq
          configuration: cores=4 enabledcores=4 threads=1
        *-cache:0
             description: L1 cache
             identifiant matériel: 8
             emplacement: Unknown
             taille: 32KiB
             capacité: 32KiB
             fonctionnalités: synchronous internal write-back instruction
             configuration: level=1
        *-cache:1
             description: L2 cache
             identifiant matériel: 9
             emplacement: Unknown
             taille: 1MiB
             capacité: 1MiB
             fonctionnalités: synchronous internal write-back unified
             configuration: level=2
     *-cache
          description: L1 cache
          identifiant matériel: 7
          emplacement: Unknown
          taille: 24KiB
          capacité: 24KiB
          fonctionnalités: synchronous internal write-back data
          configuration: level=1
     *-memory
          description: Mémoire Système
          identifiant matériel: 14
          emplacement: Carte mère
          taille: 1GiB
        *-bank:0
             description: SODIMM DDR3 Synchrone 1333 MHz (0,8 ns)
             produit: To be filled by O.E.M
             fabriquant: To be filled by O.E.M
             identifiant matériel: 0
             numéro de série: To be filled by O.E.M
             emplacement: DIMM0
             taille: 1GiB
             bits: 32 bits
             horloge: 1333MHz (0.8ns)
        *-bank:1
             description: SODIMM DDR3 Synchrone 1333 MHz (0,8 ns) [vide]
             produit: To be filled by O.E.M
             fabriquant: To be filled by O.E.M
             identifiant matériel: 1
             numéro de série: To be filled by O.E.M
             emplacement: DIMM1
             bits: 32 bits
             horloge: 1333MHz (0.8ns)
     *-pci
          description: Host bridge
          produit: Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register
          fabriquant: Intel Corporation
          identifiant matériel: 100
          information bus: pci@0000:00:00.0
          version: 0f
          bits: 32 bits
          horloge: 33MHz
          configuration: driver=iosf_mbi_pci
          ressources: irq:0
        *-display
             description: VGA compatible controller
             produit: Atom Processor Z36xxx/Z37xxx Series Graphics & Display
             fabriquant: Intel Corporation
             identifiant matériel: 2
             information bus: pci@0000:00:02.0
             version: 0f
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pm msi vga_controller bus_master cap_list rom
             configuration: driver=i915 latency=0
             ressources: irq:81 mémoire:50000000-503fffff mémoire:40000000-4fffffff portE/S:1000(taille=8) mémoire:c0000-dffff
        *-usb
             description: USB controller
             produit: Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI
             fabriquant: Intel Corporation
             identifiant matériel: 14
             information bus: pci@0000:00:14.0
             version: 0f
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi xhci bus_master cap_list
             configuration: driver=xhci_hcd latency=0
             ressources: irq:29 mémoire:50800000-5080ffff
           *-usbhost:0
                produit: xHCI Host Controller
                fabriquant: Linux 4.19.34 xhci-hcd
                identifiant matériel: 0
                information bus: usb@1
                nom logique: usb1
                version: 4.19
                fonctionnalités: usb-2.00
                configuration: driver=hub slots=6 speed=480Mbit/s
              *-usb
                   description: Concentrateur USB
                   produit: USB2.0 Hub
                   fabriquant: Genesys Logic, Inc.
                   identifiant matériel: 2
                   information bus: usb@1:2
                   version: 85.36
                   fonctionnalités: usb-2.00
                   configuration: driver=hub maxpower=100mA slots=4 speed=480Mbit/s
                 *-usb:0
                      description: Vidéo
                      produit: VGA Webcam
                      fabriquant: Alcor Micro, Corp.
                      identifiant matériel: 2
                      information bus: usb@1:2.2
                      version: 0.01
                      fonctionnalités: usb-2.00
                      configuration: driver=uvcvideo maxpower=200mA speed=480Mbit/s
                 *-usb:1
                      description: Clavier
                      fabriquant: Philips Speech Processing
                      identifiant matériel: 3
                      information bus: usb@1:2.3
                      version: 10.01
                      fonctionnalités: usb-1.10
                      configuration: driver=usbhid maxpower=100mA speed=1Mbit/s
           *-usbhost:1
                produit: xHCI Host Controller
                fabriquant: Linux 4.19.34 xhci-hcd
                identifiant matériel: 1
                information bus: usb@2
                nom logique: usb2
                version: 4.19
                fonctionnalités: usb-3.00
                configuration: driver=hub slots=1 speed=5000Mbit/s
        *-generic
             description: Encryption controller
             produit: Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine
             fabriquant: Intel Corporation
             identifiant matériel: 1a
             information bus: pci@0000:00:1a.0
             version: 0f
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pm msi bus_master cap_list
             configuration: driver=mei_txe latency=0
             ressources: irq:74 mémoire:50700000-507fffff mémoire:50600000-506fffff
        *-isa
             description: ISA bridge
             produit: Atom Processor Z36xxx/Z37xxx Series Power Control Unit
             fabriquant: Intel Corporation
             identifiant matériel: 1f
             information bus: pci@0000:00:1f.0
             version: 0f
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: isa bus_master cap_list
             configuration: driver=lpc_ich latency=0
             ressources: irq:0
  *-battery
       description: Lithium Ion Battery
       produit: SR Real Battery
       fabriquant: Intel SR 1
       identifiant matériel: 1
       version: Date
       numéro de série: 123456789
       emplacement: I2C2
       configuration: voltage=3,8V
  *-power NON-RÉCLAMÉ
       description: OEM_Define1
       produit: OEM_Define5
       fabriquant: OEM_Define2
       identifiant matériel: 2
       version: OEM_Define6
       numéro de série: OEM_Define3
       capacité: 42mWh
  *-network
       description: Interface réseau sans fil
       identifiant matériel: 3
       nom logique: wlan0
       numéro de série: a0:2c:36:58:b9:c1
       fonctionnalités: ethernet physical wireless
       configuration: broadcast=yes driver=rtl8723bs ip=192.168.1.21 multicast=yes wireless=IEEE 802.11bgn
ben@ben-Selecline-notebook-10-1:~$

Et :

ben@ben-Selecline-notebook-10-1:~$ grep "es8316" /lib/modules/$(uname -a)/modules.alias
grep: /lib/modules/Linux: Aucun fichier ou dossier de ce type
grep: ben-Selecline-notebook-10-1: Aucun fichier ou dossier de ce type
grep: 4.19.34: Aucun fichier ou dossier de ce type
grep: #1: Aucun fichier ou dossier de ce type
grep: SMP: Aucun fichier ou dossier de ce type
grep: Wed: Aucun fichier ou dossier de ce type
grep: Apr: Aucun fichier ou dossier de ce type
grep: 10: Aucun fichier ou dossier de ce type
grep: 23:20:30: Aucun fichier ou dossier de ce type
grep: CEST: Aucun fichier ou dossier de ce type
grep: 2019: Aucun fichier ou dossier de ce type
grep: x86_64: Aucun fichier ou dossier de ce type
grep: x86_64: Aucun fichier ou dossier de ce type
grep: x86_64: Aucun fichier ou dossier de ce type
grep: GNU/Linux/modules.alias: Aucun fichier ou dossier de ce type
ben@ben-Selecline-notebook-10-1:~$

Sinon, une idée me taraude depuis ce midi : Si je réinstalle maintenant que le son est "enable" dans le Bios, ça peut mieux fonctionner ???

Nuliel

Sinon, une idée me taraude depuis ce midi : Si je réinstalle maintenant que le son est "enable" dans le Bios, ça peut mieux fonctionner ???

Bonne question, ça peut avec tous les bidouillages faits.

Il y a une erreur dans la commande du dessus, c'est

grep "es8316" /lib/modules/$(uname -r)/modules.alias

kalimeth

Ca donne :

ben@ben-Selecline-notebook-10-1:~$ grep "es8316" /lib/modules/$(uname -r)/modules.alias
alias acpi*:ESSX8316:* snd_soc_es8316
alias of:N*T*Ceverest,es8316C* snd_soc_es8316
alias of:N*T*Ceverest,es8316 snd_soc_es8316
alias i2c:es8316 snd_soc_es8316
alias platform:bytcht_es8316 snd_soc_sst_byt_cht_es8316
ben@ben-Selecline-notebook-10-1:~$

diesel

Bonjour Kalimeth,

Donc, a priori, ton circuit son est connu de ton kernel (désolé pour le "-a" à la place du "-r" et merci Naziel pour la correction). Il devrait donc s'installer automatiquement.

Par contre, il y a manifestement un problème avec ton installation. le résultat du lspci est beaucoup trop limité.

Avant de te lancer à corps perdu dans une réinstallation, donne nous le résultat de

sudo fdisk -l

Amicalement.

Jean-Marie

kalimeth

Voici :

ben@ben-Selecline-notebook-10-1:~$ sudo fdisk -l
[sudo] Mot de passe de ben : 
Disque /dev/mmcblk1 : 28,9 GiB, 31037849600 octets, 60620800 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : gpt
Identifiant de disque : 2CD3455F-E76C-4711-B7BF-1759144A8767

Périphérique     Début      Fin Secteurs Taille Type
/dev/mmcblk1p1    2048  1050623  1048576   512M Système EFI
/dev/mmcblk1p2 1050624 60618751 59568128  28,4G Système de fichiers Linux
ben@ben-Selecline-notebook-10-1:~$

Nuliel

A noter qu'en faisant "réinstaller ubuntu par dessus l'ancien ubuntu" (me souviens plus du nom exact qu'il y a dans l'installateur), cela ne supprime pas la partition EFI, donc le fichier bootia32 qui est dans cette partition ne devrait pas bouger.
Tu peux laisser le paramètre du bios sur acpi stp vu

alias acpi*:ESSX8316:* snd_soc_es8316

kalimeth

Ok, je réinstalle ce midi alors ?

diesel

Une dernière chose ; je n'ai pas vu le modèle de ton circuit wifi.

Tu as ça dans la doc de ta tablette ? C'est bien une tablette ?

Pour l'installation, tu choisis : "utiliser tout le disque" ou un truc comme ça. Enfin, tu fais comme s'il n'y avait rien d'installé précédemment.

Amicalement.

Jean-Marie

Nuliel

C'est un rtl8723bs, tu risques pas de le voir diesel83140 , il est pas connecté en pci, ni en usb, mais sur un port sdio

diesel

Ben..., j'ai vu qu'il y avait un module avec ce nom là mais je n'ai pas vu de mention du circuit lui-même.

Voilà ce qu'on en lit chez Realtek : "The Realtek RTL8723BS-VQ0-CG is an 802.11bgn 2.4G single-chip that integrates Wireless LAN (WLAN) and a network SDIO interface controller...".

Donc, si je lis bien le grand breton, c'est ce circuit qui fournit la capacité sdio ("integrates a network sdio controller") et non pas qu'il est "client" d'une interface sdio existante.

Amicalement.

Jean-Marie

Nuliel

Précision: je ne connais pas la commande pour prouver que ce circuit est dedans, en général soit on remarque que dans le pilote pour windows, il y a un fichier qui y fait référence ou qu'on a direct l'info par d'autres discussions (du coup on se base sur le modèle d'ordi)

Nuliel

Peut être

ls /sys/bus/sdio/devices/

kalimeth

ben@ben-Selecline-notebook-10-1:~$ ls /sys/bus/sdio/devices/
mmc0:0001:1
ben@ben-Selecline-notebook-10-1:~$

Nuliel

mmc c'est sûrement tes 32 Go, pas la rtl8723bs. Honnêtement je ne sais pas comment on fait pour prouver que la rt8723bs est bien dedans

diesel

Et que donne

dmesg

à propos du wifi (éventuellement rechercher rtl8723) ?

Amicalement.

Jean-Marie

xubu1957

Bonjour,

Il faudrait :

sudo lshw -C network

> [Résolu] Problème de connexion au WIFI sur AUCHAN SELECLINE 10,1

kalimeth

Pour diesel83140 :

ben@ben-Selecline-notebook-10-1:~$ dmesg
[    0.000000] Linux version 4.19.34 (naziel@naziel-desktop) (gcc version 7.3.0 (Ubuntu 7.3.0-27ubuntu1~18.04)) #1 SMP Wed Apr 10 23:20:30 CEST 2019
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.34 root=UUID=dd848b90-5607-432a-a3ad-ad511cd8f4d5 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000024a6cfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000024a6d000-0x0000000024afffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000024b00000-0x000000003b6e4fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003b6e5000-0x000000003b744fff] type 20
[    0.000000] BIOS-e820: [mem 0x000000003b745000-0x000000003b964fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003b965000-0x000000003b965fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003b966000-0x000000003b966fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003b967000-0x000000003b968fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003b969000-0x000000003b969fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003b96a000-0x000000003c7fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003cc00000-0x000000003cc1dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003cc1e000-0x000000003cc45fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003cc46000-0x000000003ccb5fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003ccb6000-0x000000003ccf5fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003ccf6000-0x000000003ccfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff60000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi:  ACPI 2.0=0x3ccf5014  ESRT=0x3b754f10  SMBIOS=0x3b91c000 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Auchan - SNCOIA Selecline notebook 10,1"/Selecline notebook 10,1", BIOS SNCOIA.54450053.AUO.09 11/21/2016
[    0.000000] tsc: Detected 1332.800 MHz processor
[    0.000030] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000039] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000067] last_pfn = 0x3cd00 max_arch_pfn = 0x400000000
[    0.000075] MTRR default type: uncachable
[    0.000078] MTRR fixed ranges enabled:
[    0.000082]   00000-9FFFF write-back
[    0.000086]   A0000-FFFFF write-protect
[    0.000088] MTRR variable ranges enabled:
[    0.000093]   0 base 0FFF60000 mask FFFC00000 write-protect
[    0.000097]   1 base 000000000 mask FC0000000 write-back
[    0.000101]   2 base 03E000000 mask FFE000000 uncachable
[    0.000104]   3 base 03D000000 mask FFF000000 uncachable
[    0.000108]   4 base 03CE00000 mask FFFE00000 uncachable
[    0.000111]   5 base 03CD00000 mask FFFF00000 uncachable
[    0.000114]   6 disabled
[    0.000116]   7 disabled
[    0.000354] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.009937] esrt: Reserving ESRT space from 0x000000003b754f10 to 0x000000003b754f48.
[    0.009968] Scanning 1 areas for low memory corruption
[    0.009976] Base memory trampoline at [(____ptrval____)] 98000 size 24576
[    0.009988] BRK [0x10c01000, 0x10c01fff] PGTABLE
[    0.009993] BRK [0x10c02000, 0x10c02fff] PGTABLE
[    0.009997] BRK [0x10c03000, 0x10c03fff] PGTABLE
[    0.010219] BRK [0x10c04000, 0x10c04fff] PGTABLE
[    0.010526] BRK [0x10c05000, 0x10c05fff] PGTABLE
[    0.011463] BRK [0x10c06000, 0x10c06fff] PGTABLE
[    0.011750] BRK [0x10c07000, 0x10c07fff] PGTABLE
[    0.012391] BRK [0x10c08000, 0x10c08fff] PGTABLE
[    0.013049] Secure boot could not be determined
[    0.013053] RAMDISK: [mem 0x33965000-0x35ca9fff]
[    0.013075] ACPI: Early table checksum verification disabled
[    0.013084] ACPI: RSDP 0x000000003CCF5014 000024 (v02 INSYDE)
[    0.013096] ACPI: XSDT 0x000000003CCCD188 0000DC (v01 INSYDE INSYDE   00000003      01000013)
[    0.013114] ACPI: FACP 0x000000003CCEE000 00010C (v05 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.013133] ACPI: DSDT 0x000000003CCD9000 00F64B (v02 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.013146] ACPI: UEFI 0x000000003CCF4000 000236 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.013159] ACPI: TCPA 0x000000003CCF3000 000032 (v02 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.013172] ACPI: MSDM 0x000000003CCF2000 000055 (v03 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.013184] ACPI: UEFI 0x000000003CCF1000 000042 (v01 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.013196] ACPI: OEM0 0x000000003CCF0000 000084 (v05 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.013209] ACPI: DBG2 0x000000003CCEF000 000072 (v00 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.013221] ACPI: HPET 0x000000003CCED000 000038 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.013234] ACPI: LPIT 0x000000003CCEC000 000104 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.013246] ACPI: APIC 0x000000003CCEB000 00006C (v03 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.013259] ACPI: MCFG 0x000000003CCEA000 00003C (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.013271] ACPI: SLIC 0x000000003CCE9000 000176 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.013284] ACPI: SSDT 0x000000003CCD8000 000603 (v01 INSYDE CpuDptf  00000003 ACPI 00040000)
[    0.013296] ACPI: SSDT 0x000000003CCD5000 0024BD (v01 INSYDE DptfTab  00000003 ACPI 00040000)
[    0.013309] ACPI: SSDT 0x000000003CCD4000 000058 (v01 INSYDE LowPwrM  00000003 ACPI 00040000)
[    0.013321] ACPI: SSDT 0x000000003CCD3000 0000FF (v01 INSYDE SoCDptf  00000003 ACPI 00040000)
[    0.013333] ACPI: SSDT 0x000000003CCD2000 00043A (v01 INSYDE Tpm2Tabl 00001000 ACPI 00040000)
[    0.013346] ACPI: TPM2 0x000000003CCD1000 000034 (v03 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.013358] ACPI: SSDT 0x000000003CCD0000 000763 (v01 INSYDE CpuPm    00003000 ACPI 00040000)
[    0.013371] ACPI: SSDT 0x000000003CCCF000 000290 (v01 INSYDE Cpu0Tst  00003000 ACPI 00040000)
[    0.013384] ACPI: SSDT 0x000000003CCCE000 00017A (v01 INSYDE ApTst    00003000 ACPI 00040000)
[    0.013396] ACPI: FPDT 0x000000003CCCC000 000044 (v01 INSYDE INSYDE   00000002 ACPI 00040000)
[    0.013409] ACPI: CSRT 0x000000003CCCB000 00014C (v00 INSYDE INSYDE   00000005 ACPI 00040000)
[    0.013434] ACPI: Local APIC address 0xfee00000
[    0.013726] No NUMA configuration found
[    0.013730] Faking a node at [mem 0x0000000000000000-0x000000003ccfffff]
[    0.013759] NODE_DATA(0) allocated [mem 0x3b6ba000-0x3b6e4fff]
[    0.014723] Zone ranges:
[    0.014725]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.014730]   DMA32    [mem 0x0000000001000000-0x000000003ccfffff]
[    0.014735]   Normal   empty
[    0.014738]   Device   empty
[    0.014742] Movable zone start for each node
[    0.014753] Early memory node ranges
[    0.014756]   node   0: [mem 0x0000000000001000-0x000000000008efff]
[    0.014759]   node   0: [mem 0x0000000000090000-0x000000000009dfff]
[    0.014761]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.014764]   node   0: [mem 0x0000000020200000-0x0000000024a6cfff]
[    0.014767]   node   0: [mem 0x0000000024b00000-0x000000003b6e4fff]
[    0.014769]   node   0: [mem 0x000000003b965000-0x000000003b965fff]
[    0.014772]   node   0: [mem 0x000000003b967000-0x000000003b968fff]
[    0.014774]   node   0: [mem 0x000000003b96a000-0x000000003c7fffff]
[    0.014777]   node   0: [mem 0x000000003cc00000-0x000000003cc1dfff]
[    0.014779]   node   0: [mem 0x000000003ccf6000-0x000000003ccfffff]
[    0.014789] Reserved but unavailable: 98 pages
[    0.014794] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ccfffff]
[    0.014800] On node 0 totalpages: 246447
[    0.014803]   DMA zone: 64 pages used for memmap
[    0.014805]   DMA zone: 22 pages reserved
[    0.014808]   DMA zone: 3996 pages, LIFO batch:0
[    0.015145]   DMA32 zone: 3828 pages used for memmap
[    0.015148]   DMA32 zone: 242451 pages, LIFO batch:63
[    0.034872] x86/hpet: Will disable the HPET for this platform because it's not reliable
[    0.034884] Reserving Intel graphics memory at [mem 0x3cf00000-0x3eefffff]
[    0.034960] ACPI: Local APIC address 0xfee00000
[    0.034993] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[    0.035001] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.035006] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.035013] Using ACPI (MADT) for SMP configuration information
[    0.035018] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.035033] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.035115] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.035122] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[    0.035129] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.035131] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.035138] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.035145] PM: Registered nosave memory: [mem 0x24a6d000-0x24afffff]
[    0.035151] PM: Registered nosave memory: [mem 0x3b6e5000-0x3b744fff]
[    0.035154] PM: Registered nosave memory: [mem 0x3b745000-0x3b964fff]
[    0.035160] PM: Registered nosave memory: [mem 0x3b966000-0x3b966fff]
[    0.035167] PM: Registered nosave memory: [mem 0x3b969000-0x3b969fff]
[    0.035174] PM: Registered nosave memory: [mem 0x3c800000-0x3cbfffff]
[    0.035181] PM: Registered nosave memory: [mem 0x3cc1e000-0x3cc45fff]
[    0.035183] PM: Registered nosave memory: [mem 0x3cc46000-0x3ccb5fff]
[    0.035186] PM: Registered nosave memory: [mem 0x3ccb6000-0x3ccf5fff]
[    0.035191] [mem 0x3ef00000-0xe00f7fff] available for PCI devices
[    0.035196] Booting paravirtualized kernel on bare hardware
[    0.035202] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.035228] random: get_random_bytes called from start_kernel+0x99/0x545 with crng_init=0
[    0.035255] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.036669] percpu: Embedded 47 pages/cpu @(____ptrval____) s155648 r8192 d28672 u524288
[    0.036698] pcpu-alloc: s155648 r8192 d28672 u524288 alloc=1*2097152
[    0.036703] pcpu-alloc: [0] 0 1 2 3 
[    0.036816] Built 1 zonelists, mobility grouping on.  Total pages: 242533
[    0.036819] Policy zone: DMA32
[    0.036824] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.34 root=UUID=dd848b90-5607-432a-a3ad-ad511cd8f4d5 ro quiet splash vt.handoff=1
[    0.037141] Calgary: detecting Calgary via BIOS EBDA area
[    0.037144] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.048020] Memory: 863136K/985788K available (14348K kernel code, 2691K rwdata, 4240K rodata, 2464K init, 4960K bss, 122652K reserved, 0K cma-reserved)
[    0.048399] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.048418] Kernel/User page tables isolation: enabled
[    0.048620] ftrace: allocating 40957 entries in 160 pages
[    0.093849] rcu: Hierarchical RCU implementation.
[    0.093854] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.093856] 	Tasks RCU enabled.
[    0.093859] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.105661] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 0
[    0.105804] Console: colour dummy device 80x25
[    0.105813] console [tty0] enabled
[    0.105864] ACPI: Core revision 20180810
[    0.106376] APIC: Switch to symmetric I/O mode setup
[    0.106433] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x133626f6b26, max_idle_ns: 440795214178 ns
[    0.106463] Calibrating delay loop (skipped), value calculated using timer frequency.. 2665.60 BogoMIPS (lpj=5331200)
[    0.106471] pid_max: default: 32768 minimum: 301
[    0.107885] Security Framework initialized
[    0.107891] Yama: becoming mindful.
[    0.107946] AppArmor: AppArmor initialized
[    0.108484] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.108793] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.108845] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.108860] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.109480] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.109483] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.109501] mce: CPU supports 6 MCE banks
[    0.109513] CPU0: Thermal monitoring enabled (TM1)
[    0.109519] process: using mwait in idle threads
[    0.109528] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.109531] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[    0.109537] Spectre V2 : Mitigation: Full generic retpoline
[    0.109539] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.109983] Freeing SMP alternatives memory: 36K
[    0.110439] TSC deadline timer enabled
[    0.110439] smpboot: CPU0: Intel(R) Atom(TM) CPU  Z3735G @ 1.33GHz (family: 0x6, model: 0x37, stepping: 0x8)
[    0.110439] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.110439] ... version:                3
[    0.110439] ... bit width:              40
[    0.110439] ... generic registers:      2
[    0.110439] ... value mask:             000000ffffffffff
[    0.110439] ... max period:             0000007fffffffff
[    0.110439] ... fixed-purpose events:   3
[    0.110439] ... event mask:             0000000700000003
[    0.110439] rcu: Hierarchical SRCU implementation.
[    0.110439] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.110439] smp: Bringing up secondary CPUs ...
[    0.110439] x86: Booting SMP configuration:
[    0.110439] .... node  #0, CPUs:      #1 #2 #3
[    0.111804] smp: Brought up 1 node, 4 CPUs
[    0.111804] smpboot: Max logical packages: 1
[    0.111804] smpboot: Total of 4 processors activated (10662.40 BogoMIPS)
[    0.114941] devtmpfs: initialized
[    0.114941] x86/mm: Memory block size: 128MB
[    0.115160] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[    0.115160] PM: Registering ACPI NVS region [mem 0x3cc46000-0x3ccb5fff] (458752 bytes)
[    0.115160] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.115160] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.115160] pinctrl core: initialized pinctrl subsystem
[    0.115160] RTC time: 13:59:21, date: 04/12/19
[    0.115346] NET: Registered protocol family 16
[    0.115530] audit: initializing netlink subsys (disabled)
[    0.115554] audit: type=2000 audit(1555077561.008:1): state=initialized audit_enabled=0 res=1
[    0.115554] cpuidle: using governor ladder
[    0.115554] cpuidle: using governor menu
[    0.115554] ACPI: bus type PCI registered
[    0.115554] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.115554] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.115554] PCI: not using MMCONFIG
[    0.115554] PCI: Using configuration type 1 for base access
[    0.123030] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.123030] ACPI: Added _OSI(Module Device)
[    0.123030] ACPI: Added _OSI(Processor Device)
[    0.123030] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.123030] ACPI: Added _OSI(Processor Aggregator Device)
[    0.123030] ACPI: Added _OSI(Linux-Dell-Video)
[    0.123030] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.188191] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.209303] ACPI: Dynamic OEM Table Load:
[    0.209328] ACPI: SSDT 0xFFFFA0C23C1FF800 000501 (v01 PmRef  Cpu0Ist  00003000 INTL 20130117)
[    0.211516] ACPI: Dynamic OEM Table Load:
[    0.211538] ACPI: SSDT 0xFFFFA0C23C1F8800 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    0.214382] ACPI: Dynamic OEM Table Load:
[    0.214402] ACPI: SSDT 0xFFFFA0C23C268A00 00015F (v01 PmRef  ApIst    00003000 INTL 20130117)
[    0.215658] ACPI: Dynamic OEM Table Load:
[    0.215677] ACPI: SSDT 0xFFFFA0C23C288D80 00008D (v01 PmRef  ApCst    00003000 INTL 20130117)
[    0.223675] ACPI: Interpreter enabled
[    0.223726] ACPI: (supports S0 S5)
[    0.223731] ACPI: Using IOAPIC for interrupt routing
[    0.223870] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.236833] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] not reserved in ACPI motherboard resources
[    0.236838] PCI: not using MMCONFIG
[    0.236848] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.244388] ACPI: Power Resource [USBC] (on)
[    0.246064] ACPI: Power Resource [WWPR] (off)
[    0.258576] ACPI: Power Resource [PLPE] (on)
[    0.278298] ACPI: Power Resource [CLK0] (on)
[    0.278477] ACPI: Power Resource [CLK1] (on)
[    0.279628] ACPI: Power Resource [P28P] (off)
[    0.279801] ACPI: Power Resource [P18P] (off)
[    0.280888] ACPI: Power Resource [CLK0] (on)
[    0.281064] ACPI: Power Resource [CLK1] (on)
[    0.290737] ACPI: Power Resource [P28X] (off)
[    0.290918] ACPI: Power Resource [P18X] (off)
[    0.291119] ACPI: Power Resource [P28T] (off)
[    0.291304] ACPI: Power Resource [P18T] (off)
[    0.291482] ACPI: Power Resource [P1XT] (off)
[    0.303832] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.303851] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.304105] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.304153] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.305501] PCI host bridge to bus 0000:00
[    0.305509] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.305514] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.305519] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.305523] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.305528] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.305532] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.305536] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.305541] pci_bus 0000:00: root bus resource [mem 0x50c00000-0x50ffffff window]
[    0.305545] pci_bus 0000:00: root bus resource [mem 0x3cf00001-0x3ef00000 window]
[    0.305549] pci_bus 0000:00: root bus resource [mem 0x40000000-0x508ffffe window]
[    0.305553] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff window]
[    0.305558] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.305576] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[    0.305831] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[    0.305853] pci 0000:00:02.0: reg 0x10: [mem 0x50000000-0x503fffff]
[    0.305868] pci 0000:00:02.0: reg 0x18: [mem 0x40000000-0x4fffffff pref]
[    0.305882] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x1007]
[    0.305914] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.306150] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[    0.306178] pci 0000:00:14.0: reg 0x10: [mem 0x50800000-0x5080ffff 64bit]
[    0.306258] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.306484] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[    0.306514] pci 0000:00:1a.0: reg 0x10: [mem 0x50700000-0x507fffff]
[    0.306528] pci 0000:00:1a.0: reg 0x14: [mem 0x50600000-0x506fffff]
[    0.306629] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.306847] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[    0.308834] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.309226] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.309616] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.310006] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.310395] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.310790] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.311181] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.311574] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.337420] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.337420] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.337420] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.337420] vgaarb: loaded
[    0.337420] SCSI subsystem initialized
[    0.337420] libata version 3.00 loaded.
[    0.337420] ACPI: bus type USB registered
[    0.337420] usbcore: registered new interface driver usbfs
[    0.337420] usbcore: registered new interface driver hub
[    0.337420] usbcore: registered new device driver usb
[    0.511820] pps_core: LinuxPPS API ver. 1 registered
[    0.511823] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.511834] PTP clock support registered
[    0.511902] EDAC MC: Ver: 3.0.0
[    0.511902] Registered efivars operations
[    0.522553] PCI: Using ACPI for IRQ routing
[    0.522560] PCI: pci_cache_line_size set to 64 bytes
[    0.522588] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.522595] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.522599] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.522602] e820: reserve RAM buffer [mem 0x24a6d000-0x27ffffff]
[    0.522605] e820: reserve RAM buffer [mem 0x3b6e5000-0x3bffffff]
[    0.522608] e820: reserve RAM buffer [mem 0x3b966000-0x3bffffff]
[    0.522611] e820: reserve RAM buffer [mem 0x3b969000-0x3bffffff]
[    0.522614] e820: reserve RAM buffer [mem 0x3c800000-0x3fffffff]
[    0.522619] e820: reserve RAM buffer [mem 0x3cc1e000-0x3fffffff]
[    0.522623] e820: reserve RAM buffer [mem 0x3cd00000-0x3fffffff]
[    0.522939] NetLabel: Initializing
[    0.522942] NetLabel:  domain hash size = 128
[    0.522944] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.522991] NetLabel:  unlabeled traffic allowed by default
[    0.526449] clocksource: Switched to clocksource tsc-early
[    0.566279] VFS: Disk quotas dquot_6.6.0
[    0.566327] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.566666] AppArmor: AppArmor Filesystem Enabled
[    0.566774] pnp: PnP ACPI init
[    0.566956] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.567198] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.567204] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.567209] system 00:01: [io  0x0500-0x05fe] has been reserved
[    0.567214] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.567219] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.567235] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.567722] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.576097] pnp: PnP ACPI: found 3 devices
[    0.581757] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.581763] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.581768] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.581772] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.581776] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.581781] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.581785] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.581790] pci_bus 0000:00: resource 11 [mem 0x50c00000-0x50ffffff window]
[    0.581794] pci_bus 0000:00: resource 12 [mem 0x3cf00001-0x3ef00000 window]
[    0.581798] pci_bus 0000:00: resource 13 [mem 0x40000000-0x508ffffe window]
[    0.581803] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed40fff window]
[    0.582062] NET: Registered protocol family 2
[    0.582524] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes)
[    0.582547] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.582599] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    0.582659] TCP: Hash tables configured (established 8192 bind 8192)
[    0.582762] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.582782] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.582984] NET: Registered protocol family 1
[    0.583023] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.583533] PCI: CLS 64 bytes, default 64
[    0.583670] Unpacking initramfs...
[    1.972394] Freeing initrd memory: 36116K
[    1.972592] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x133626f6b26, max_idle_ns: 440795214178 ns
[    1.972631] clocksource: Switched to clocksource tsc
[    1.972880] Scanning for low memory corruption every 60 seconds
[    1.974820] Initialise system trusted keyrings
[    1.974854] Key type blacklist registered
[    1.974968] workingset: timestamp_bits=36 max_order=18 bucket_order=0
[    1.979590] zbud: loaded
[    1.981118] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.981849] fuse init (API version 7.27)
[    1.982072] pstore: using deflate compression
[    1.986500] Key type asymmetric registered
[    1.986505] Asymmetric key parser 'x509' registered
[    1.986539] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.986644] io scheduler noop registered
[    1.986647] io scheduler deadline registered
[    1.986763] io scheduler cfq registered (default)
[    1.987384] efifb: probing for efifb
[    1.987419] efifb: framebuffer at 0x40000000, using 2432k, total 2432k
[    1.987423] efifb: mode is 1024x600x32, linelength=4096, pages=1
[    1.987425] efifb: scrolling: redraw
[    1.987429] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.993618] Console: switching to colour frame buffer device 128x37
[    1.999485] fb0: EFI VGA frame buffer device
[    1.999516] intel_idle: MWAIT substates: 0x33000020
[    1.999519] intel_idle: v0.4.1 model 0x37
[    2.000044] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.000118] ACPI: AC: found native INT33F4 PMIC, not loading
[    2.000293] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    2.000332] ACPI: Lid Switch [LID]
[    2.007767] [Firmware Bug]: No valid trip found
[    2.007914] battery: ACPI: Battery: found native INT33F4 PMIC, not loading
[    2.010317] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.030965] 00:02: ttyS0 at I/O 0x3f8 (irq = 26, base_baud = 115200) is a 16550A
[    2.074684] hpet: number irqs doesn't agree with number of timers
[    2.076351] Linux agpgart interface v0.103
[    2.165043] loop: module loaded
[    2.167149] libphy: Fixed MDIO Bus: probed
[    2.167152] tun: Universal TUN/TAP device driver, 1.6
[    2.168717] PPP generic driver version 2.4.2
[    2.170059] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.170094] ehci-pci: EHCI PCI platform driver
[    2.170178] ehci-platform: EHCI generic platform driver
[    2.170310] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.170330] ohci-pci: OHCI PCI platform driver
[    2.170395] ohci-platform: OHCI generic platform driver
[    2.170533] uhci_hcd: USB Universal Host Controller Interface driver
[    2.171149] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.171166] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    2.172270] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    2.172279] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.172631] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    2.172637] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.172641] usb usb1: Product: xHCI Host Controller
[    2.172645] usb usb1: Manufacturer: Linux 4.19.34 xhci-hcd
[    2.172648] usb usb1: SerialNumber: 0000:00:14.0
[    2.174624] hub 1-0:1.0: USB hub found
[    2.174703] hub 1-0:1.0: 6 ports detected
[    2.699793] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.699806] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.699817] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    2.700182] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    2.700187] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.700191] usb usb2: Product: xHCI Host Controller
[    2.700195] usb usb2: Manufacturer: Linux 4.19.34 xhci-hcd
[    2.700198] usb usb2: SerialNumber: 0000:00:14.0
[    2.702143] hub 2-0:1.0: USB hub found
[    2.702208] hub 2-0:1.0: 1 port detected
[    2.703404] i8042: PNP: No PS/2 controller found.
[    2.706079] mousedev: PS/2 mouse device common for all mice
[    2.710393] rtc_cmos 00:00: registered as rtc0
[    2.710604] rtc_cmos 00:00: no alarms, y3k, 242 bytes nvram
[    2.710691] i2c /dev entries driver
[    2.714968] device-mapper: uevent: version 1.0.3
[    2.716851] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    2.716878] intel_pstate: Intel P-state driver initializing
[    2.720049] ledtrig-cpu: registered to indicate activity on CPUs
[    2.720061] EFI Variables Facility v0.08 2004-May-17
[    2.735230] NET: Registered protocol family 10
[    2.750254] Segment Routing with IPv6
[    2.750310] NET: Registered protocol family 17
[    2.750394] Key type dns_resolver registered
[    2.755499] RAS: Correctable Errors collector initialized.
[    2.755573] microcode: sig=0x30678, pf=0x2, revision=0x82f
[    2.758108] microcode: Microcode Update Driver: v2.2.
[    2.758225] sched_clock: Marking stable (2757317458, 713230)->(2770780720, -12750032)
[    2.761990] registered taskstats version 1
[    2.762021] Loading compiled-in X.509 certificates
[    2.764529] Loaded X.509 cert 'Build time autogenerated kernel key: 8cc112387651ace15bf6947ddea0a57d399ec6ef'
[    2.764581] zswap: loaded using pool lzo/zbud
[    2.778287] Key type big_key registered
[    2.778296] Key type trusted registered
[    2.788428] Key type encrypted registered
[    2.788472] AppArmor: AppArmor sha1 policy hashing enabled
[    2.788538] ima: Allocated hash algorithm: sha1
[    2.873235] evm: Initialising EVM extended attributes:
[    2.873244] evm: security.selinux
[    2.873249] evm: security.SMACK64
[    2.873253] evm: security.SMACK64EXEC
[    2.873257] evm: security.SMACK64TRANSMUTE
[    2.873261] evm: security.SMACK64MMAP
[    2.873264] evm: security.apparmor
[    2.873268] evm: security.ima
[    2.873272] evm: security.capability
[    2.873278] evm: HMAC attrs: 0x1
[    2.903044] i2c_designware 80860F41:04: I2C bus managed by PUNIT
[    2.920925]   Magic number: 15:708:988
[    2.920937] machinecheck machinecheck1: hash matches
[    2.921347] rtc_cmos 00:00: setting system clock to 2019-04-12 13:59:24 UTC (1555077564)
[    2.975076] Freeing unused decrypted memory: 2040K
[    2.979558] Freeing unused kernel image memory: 2464K
[    2.994880] Write protecting the kernel read-only data: 22528k
[    2.999358] Freeing unused kernel image memory: 2008K
[    3.001500] Freeing unused kernel image memory: 1904K
[    3.034355] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.034893] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[    3.034946] x86/mm: Checking user space page tables
[    3.066193] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.066199] Run /init as init process
[    3.187645] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[    3.187652] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.187655] usb 1-2: Product: USB2.0 Hub
[    3.188515] hub 1-2:1.0: USB hub found
[    3.188794] hub 1-2:1.0: 4 ports detected
[    3.189415] usb: port power management may be unreliable
[    3.341553] sdhci: Secure Digital Host Controller Interface driver
[    3.341556] sdhci: Copyright(c) Pierre Ossman
[    3.350919] mmc0: SDHCI controller on ACPI [INT33BB:00] using ADMA
[    3.372295] mmc1: SDHCI controller on ACPI [80860F14:00] using ADMA
[    3.395624] mmc2: SDHCI controller on ACPI [80860F14:02] using ADMA
[    3.399653] mmc0: new high speed SDIO card at address 0001
[    3.471678] mmc1: new HS200 MMC card at address 0001
[    3.472486] mmcblk1: mmc1:0001 NCard  28.9 GiB 
[    3.472781] mmcblk1boot0: mmc1:0001 NCard  partition 1 4.00 MiB
[    3.473137] mmcblk1boot1: mmc1:0001 NCard  partition 2 4.00 MiB
[    3.473303] mmcblk1rpmb: mmc1:0001 NCard  partition 3 4.00 MiB, chardev (241:0)
[    3.476710]  mmcblk1: p1 p2
[    3.486616] usb 1-2.2: new high-speed USB device number 3 using xhci_hcd
[    3.514205] random: fast init done
[    3.624598] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[    3.687190] usb 1-2.2: New USB device found, idVendor=058f, idProduct=5608, bcdDevice= 0.01
[    3.687205] usb 1-2.2: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[    3.687216] usb 1-2.2: Product: VGA Webcam
[    3.687225] usb 1-2.2: Manufacturer: Alcor Micro, Corp.
[    3.775175] usb 1-2.3: new low-speed USB device number 4 using xhci_hcd
[    3.880265] usb 1-2.3: New USB device found, idVendor=0911, idProduct=2188, bcdDevice=10.01
[    3.880270] usb 1-2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.293265] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    4.312199] systemd[1]: Detected architecture x86-64.
[    4.334378] systemd[1]: Set hostname to <ben-Selecline-notebook-10-1>.
[    4.445821] systemd-gpt-auto-generator[238]: Failed to dissect: Input/output error
[    4.446932] systemd[230]: /lib/systemd/system-generators/systemd-gpt-auto-generator failed with exit status 1.
[    4.636669] random: systemd: uninitialized urandom read (16 bytes read)
[    4.637236] systemd[1]: Created slice System Slice.
[    4.637415] random: systemd: uninitialized urandom read (16 bytes read)
[    4.637819] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    4.637862] random: systemd: uninitialized urandom read (16 bytes read)
[    4.638396] systemd[1]: Listening on Journal Socket.
[    4.640299] systemd[1]: Mounting POSIX Message Queue File System...
[    4.640861] systemd[1]: Listening on Journal Audit Socket.
[    4.640951] systemd[1]: Reached target User and Group Name Lookups.
[    4.671500] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro
[    4.756196] lp: driver loaded but no devices found
[    4.788011] ppdev: user-space parallel port driver
[    4.848167] Adding 1381704k swap on /swapfile.  Priority:-2 extents:5 across:1414472k SSFS
[    4.849843] systemd-journald[263]: Received request to flush runtime journal from PID 1
[    7.161795] axp20x-i2c i2c-INT33F4:00: AXP20x variant AXP288 found
[    7.206858] 80860F0A:00: ttyS4 at MMIO 0x5091b000 (irq = 17, base_baud = 2764800) is a 16550A
[    7.207103] serial serial0: tty port ttyS4 registered
[    7.207302] int3401 thermal INT3401:00: Creating sysfs group for PROC_THERMAL_PLATFORM_DEV
[    7.226921] 80860F0A:01: ttyS5 at MMIO 0x5091d000 (irq = 18, base_baud = 2764800) is a 16550A
[    7.227132] axp20x-i2c i2c-INT33F4:00: AXP20X driver loaded
[    7.375053] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[    7.378414] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    7.379540] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    7.415699] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[    7.598494] intel_sst_acpi 80860F28:00: No matching machine driver found
[    7.610035] hidraw: raw HID events driver (C) Jiri Kosina
[    7.616543] r8723bs: module is from the staging directory, the quality is unknown, you have been warned.
[    7.619950] r8723bs: module is from the staging directory, the quality is unknown, you have been warned.
[    7.621016] RTL8723BS: module init start
[    7.621021] RTL8723BS: rtl8723bs v4.3.5.5_12290.20140916_BTCOEX20140507-4E40
[    7.621022] RTL8723BS: rtl8723bs BT-Coex version = BTCOEX20140507-4E40
[    7.676779] usbcore: registered new interface driver usbhid
[    7.676782] usbhid: USB HID core driver
[    7.685878] pnetdev = 00000000eab4ab01
[    7.705256] media: Linux media interface: v0.10
[    7.737455] random: crng init done
[    7.737460] random: 7 urandom warning(s) missed due to ratelimiting
[    7.813287] RTL8723BS: rtw_ndev_init(wlan0)
[    7.813940] RTL8723BS: module init ret =0
[    7.841424] cryptd: max_cpu_qlen set to 1000
[    7.844051] videodev: Linux video capture interface: v2.00
[    7.885843] SSE version of gcm_enc/dec engaged.
[    7.960561] uvcvideo: Found UVC 1.00 device VGA Webcam (058f:5608)
[    7.970861] uvcvideo 1-2.2:1.0: Entity type for entity Extension 6 was not initialized!
[    7.970868] uvcvideo 1-2.2:1.0: Entity type for entity Processing 5 was not initialized!
[    7.970872] uvcvideo 1-2.2:1.0: Entity type for entity Selector 4 was not initialized!
[    7.970876] uvcvideo 1-2.2:1.0: Entity type for entity Camera 1 was not initialized!
[    7.971058] input: VGA Webcam: VGA Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input1
[    7.974801] usbcore: registered new interface driver uvcvideo
[    7.974805] USB Video Class driver (1.1.1)
[    8.027090] input: gpio-keys as /devices/platform/gpio-keys.0.auto/input/input3
[    8.029242] input: gpio-keys as /devices/platform/gpio-keys.1.auto/input/input4
[    8.045103] VFIO - User Level meta-driver version: 0.3
[    8.124675] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 16 -> VIRQ 47
[    8.150640] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 17 -> VIRQ 48
[    8.182174] input: HID 0911:2188 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:0911:2188.0001/input/input5
[    8.188048] intel_rapl: Found RAPL domain package
[    8.188055] intel_rapl: Found RAPL domain core
[    8.207014] checking generic (40000000 260000) vs hw (40000000 10000000)
[    8.207018] fb: switching to inteldrmfb from EFI VGA
[    8.207198] Console: switching to colour dummy device 80x25
[    8.207488] [drm] Replacing VGA console driver
[    8.207714] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    8.207717] [drm] Driver supports precise vblank timestamp query.
[    8.210194] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    8.228982] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[    8.233112] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    8.234230] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    8.240436] [drm] HDaudio controller not detected, using LPE audio instead
[    8.240779] hid-generic 0003:0911:2188.0001: input,hidraw0: USB HID v1.01 Keyboard [HID 0911:2188] on usb-0000:00:14.0-2.3/input0
[    8.245756] input: HID 0911:2188 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:0911:2188.0002/input/input7
[    8.247630] input: HID 0911:2188 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:0911:2188.0002/input/input8
[    8.306926] input: axp20x-pek as /devices/platform/80860F41:04/i2c-4/i2c-INT33F4:00/axp221-pek/input/input2
[    8.308488] input: HID 0911:2188 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:0911:2188.0002/input/input9
[    8.308698] input: HID 0911:2188 Wireless Radio Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:0911:2188.0002/input/input10
[    8.309033] hid-generic 0003:0911:2188.0002: input,hiddev0,hidraw1: USB HID v1.01 Mouse [HID 0911:2188] on usb-0000:00:14.0-2.3/input1
[    8.340857] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 18 -> VIRQ 49
[    8.351875] fbcon: inteldrmfb (fb0) is primary device
[    8.366648] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 19 -> VIRQ 50
[    8.459268] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 24 -> VIRQ 55
[    8.492883] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 25 -> VIRQ 56
[    8.933226] audit: type=1400 audit(1555077570.507:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=512 comm="apparmor_parser"
[    8.933794] audit: type=1400 audit(1555077570.507:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=512 comm="apparmor_parser"
[    8.934544] audit: type=1400 audit(1555077570.511:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=512 comm="apparmor_parser"
[    9.143797] audit: type=1400 audit(1555077570.719:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=515 comm="apparmor_parser"
[    9.307541] audit: type=1400 audit(1555077570.883:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=517 comm="apparmor_parser"
[    9.334328] audit: type=1400 audit(1555077570.907:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=509 comm="apparmor_parser"
[    9.335127] audit: type=1400 audit(1555077570.911:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=509 comm="apparmor_parser"
[    9.383429] audit: type=1400 audit(1555077570.959:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=507 comm="apparmor_parser"
[    9.384306] audit: type=1400 audit(1555077570.959:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=507 comm="apparmor_parser"
[    9.385063] audit: type=1400 audit(1555077570.959:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=507 comm="apparmor_parser"
[    9.764833] Console: switching to colour frame buffer device 128x37
[    9.784063] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   18.636993] kauditd_printk_skb: 8 callbacks suppressed
[   18.637004] audit: type=1400 audit(1555077580.211:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=505 comm="apparmor_parser"
[   18.638408] audit: type=1400 audit(1555077580.211:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=505 comm="apparmor_parser"
[   18.642085] audit: type=1400 audit(1555077580.215:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=505 comm="apparmor_parser"
[   18.642954] audit: type=1400 audit(1555077580.219:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=505 comm="apparmor_parser"
[   18.646128] audit: type=1400 audit(1555077580.219:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=505 comm="apparmor_parser"
[   18.646942] audit: type=1400 audit(1555077580.223:25): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=505 comm="apparmor_parser"
[   19.455147] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.464166] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin
[   20.854572] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.014285] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   22.929299] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
[   30.484428] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
[   30.539045] RTL8723BS: start auth
[   30.542820] RTL8723BS: auth success, start assoc
[   30.546895] RTL8723BS: rtw_cfg80211_indicate_connect(wlan0) BSS not found !!
[   30.546913] RTL8723BS: assoc success
[   30.555197] RTL8723BS: send eapol packet
[   30.564240] RTL8723BS: send eapol packet
[   30.564620] RTL8723BS: set pairwise key camid:4, addr:5c:33:8e:c1:d4:a0, kid:0, type:AES
[   30.565545] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   30.565853] RTL8723BS: set group key camid:5, addr:5c:33:8e:c1:d4:a0, kid:2, type:AES
[  484.576557] RTL8723BS: send eapol packet
[  484.580042] RTL8723BS: set group key camid:6, addr:5c:33:8e:c1:d4:a0, kid:1, type:AES
[ 1237.605309] ACPI: button: The lid device is not compliant to SW_LID.
[ 4086.068117] RTL8723BS: send eapol packet
[ 4086.071918] RTL8723BS: set group key camid:5, addr:5c:33:8e:c1:d4:a0, kid:2, type:AES
[ 7687.554305] RTL8723BS: send eapol packet
[ 7687.555760] RTL8723BS: set group key camid:6, addr:5c:33:8e:c1:d4:a0, kid:1, type:AES
[11289.052457] RTL8723BS: send eapol packet
[11289.053470] RTL8723BS: set group key camid:5, addr:5c:33:8e:c1:d4:a0, kid:2, type:AES
[14890.531139] RTL8723BS: send eapol packet
[14890.532854] RTL8723BS: set group key camid:6, addr:5c:33:8e:c1:d4:a0, kid:1, type:AES
[18492.010850] RTL8723BS: send eapol packet
[18492.011776] RTL8723BS: set group key camid:5, addr:5c:33:8e:c1:d4:a0, kid:2, type:AES
[22093.496109] RTL8723BS: send eapol packet
[22093.497709] RTL8723BS: set group key camid:6, addr:5c:33:8e:c1:d4:a0, kid:1, type:AES
[25694.990572] RTL8723BS: send eapol packet
[25694.992086] RTL8723BS: set group key camid:5, addr:5c:33:8e:c1:d4:a0, kid:2, type:AES
[29296.471766] RTL8723BS: send eapol packet
[29296.473278] RTL8723BS: set group key camid:6, addr:5c:33:8e:c1:d4:a0, kid:1, type:AES
[32897.956562] RTL8723BS: send eapol packet
[32897.958097] RTL8723BS: set group key camid:5, addr:5c:33:8e:c1:d4:a0, kid:2, type:AES
[34510.389590] perf: interrupt took too long (2534 > 2500), lowering kernel.perf_event_max_sample_rate to 78750
[36499.430688] RTL8723BS: send eapol packet
[36499.434810] RTL8723BS: set group key camid:6, addr:5c:33:8e:c1:d4:a0, kid:1, type:AES
[40099.848239] RTL8723BS: send eapol packet
[40099.849221] RTL8723BS: set group key camid:5, addr:5c:33:8e:c1:d4:a0, kid:2, type:AES
[43701.333241] RTL8723BS: send eapol packet
[43701.335105] RTL8723BS: set group key camid:6, addr:5c:33:8e:c1:d4:a0, kid:1, type:AES
[47302.818741] RTL8723BS: send eapol packet
[47302.819613] RTL8723BS: set group key camid:5, addr:5c:33:8e:c1:d4:a0, kid:2, type:AES
[50904.305127] RTL8723BS: send eapol packet
[50904.308849] RTL8723BS: set group key camid:6, addr:5c:33:8e:c1:d4:a0, kid:1, type:AES
[52183.337713] perf: interrupt took too long (3214 > 3167), lowering kernel.perf_event_max_sample_rate to 62000
[54505.792015] RTL8723BS: send eapol packet
[54505.792949] RTL8723BS: set group key camid:5, addr:5c:33:8e:c1:d4:a0, kid:2, type:AES
[58107.278244] RTL8723BS: send eapol packet
[58107.281744] RTL8723BS: set group key camid:6, addr:5c:33:8e:c1:d4:a0, kid:1, type:AES
[61708.765304] RTL8723BS: send eapol packet
[61708.767150] RTL8723BS: set group key camid:5, addr:5c:33:8e:c1:d4:a0, kid:2, type:AES
[65310.253650] RTL8723BS: send eapol packet
[65310.257150] RTL8723BS: set group key camid:6, addr:5c:33:8e:c1:d4:a0, kid:1, type:AES
[68911.760551] RTL8723BS: send eapol packet
[68911.762428] RTL8723BS: set group key camid:5, addr:5c:33:8e:c1:d4:a0, kid:2, type:AES
[70158.688528] perf: interrupt took too long (4025 > 4017), lowering kernel.perf_event_max_sample_rate to 49500
[72513.231889] RTL8723BS: send eapol packet
[72513.233703] RTL8723BS: set group key camid:6, addr:5c:33:8e:c1:d4:a0, kid:1, type:AES
[76114.774528] RTL8723BS: send eapol packet
[76114.775347] RTL8723BS: set group key camid:5, addr:5c:33:8e:c1:d4:a0, kid:2, type:AES
ben@ben-Selecline-notebook-10-1:~$

Pour Xubu :

ben@ben-Selecline-notebook-10-1:~$ sudo lshw -C network 
[sudo] Mot de passe de ben : 
  *-network                 
       description: Interface réseau sans fil
       identifiant matériel: 3
       nom logique: wlan0
       numéro de série: a0:2c:36:58:b9:c1
       fonctionnalités: ethernet physical wireless
       configuration: broadcast=yes driver=rtl8723bs ip=192.168.1.21 multicast=yes wireless=IEEE 802.11bgn
ben@ben-Selecline-notebook-10-1:~$

« Page précédente Page suivante »