J'ai un problème avec le lecteur de carte SD. Vu dans la commande "dmesg" :
mmc0: tuning execution failed: -22
mmc0: error -22 whilst initialising SD card
Extrait (bizarre ?) de "lspci -v" :
03:00.0 Non-Volatile memory controller: Kingston Technology Company, Inc. Device 5008 (rev 01) (prog-if 02 [NVM Express])
Subsystem: Kingston Technology Company, Inc. Device 5008
Flags: bus master, fast devsel, latency 0, IRQ 16, NUMA node 0
Memory at df000000 (64-bit, non-prefetchable) [size=16K]
I/O ports at e000 [size=8]
Capabilities: [80] Express Endpoint, MSI 00
Capabilities: [d0] MSI-X: Enable+ Count=9 Masked-
Capabilities: [e0] MSI: Enable- Count=1/8 Maskable- 64bit+
Capabilities: [f8] Power Management version 3
Capabilities: [100] Vendor Specific Information: ID=1556 Rev=1 Len=008 <?>
Capabilities: [108] Latency Tolerance Reporting
Capabilities: [110] L1 PM Substates
Capabilities: [128] Alternative Routing-ID Interpretation (ARI)
Capabilities: [200] Advanced Error Reporting
Capabilities: [300] #19
Kernel driver in use: nvme
Kernel modules: nvme
Quelqu'un a-t-il une piste?
