attention sa fait mal a la tete!!
=> Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 6.03
Boot sector info: Syslinux looks at sector 32776 of /dev/sda1 for its
second stage. The integrity check of Syslinux failed.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg
/EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 7.5 GiB, 8002732032 bytes, 15630336 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 15,630,335 15,628,288 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 squashfs
/dev/loop2 squashfs
/dev/loop3 squashfs
/dev/loop4 squashfs
/dev/loop5 squashfs
/dev/loop6 squashfs
/dev/loop7 squashfs
/dev/loop8 squashfs
/dev/sda1 8E04-8F18 vfat UBUNTU 18_0
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Sep 4 21:36 usb-SanDisk_Cruzer_Blade_4C531001550409111210-0:0 -> ../../sda
lrwxrwxrwx 1 root root 10 Sep 4 21:36 usb-SanDisk_Cruzer_Blade_4C531001550409111210-0:0-part1 -> ../../sda1
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sda1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
set timeout=5
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
initrd /casper/initrd
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
initrd /casper/initrd
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
initrd /casper/initrd
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz boot=casper integrity-check quiet splash ---
initrd /casper/initrd
}
--------------------------------------------------------------------------------
============================== sda1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
DEFAULT loadconfig
LABEL loadconfig
CONFIG /isolinux/isolinux.cfg
APPEND /isolinux/
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sda1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? syslinux.cfg 1
?? = ?? ldlinux.sys 1
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/7997/mountinfo) leaked on lvs invocation. Parent PID 12712: bash
File descriptor 63 (pipe:[89019]) leaked on lvs invocation. Parent PID 12712: bash
ADDITIONAL INFORMATION :
=================== log of boot-info 20190904_2136 ===================
boot-info version : 4ppa66
boot-sav version : 4ppa66
boot-sav-extra version : 4ppa66
glade2script version : 3.2.3~ppa4
boot-info is executed in live-session (Ubuntu 18.04.3 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
ls: cannot access '/home/usr/.config': No such file or directory
=================== os-prober:
=================== blkid:
/dev/sda1: LABEL="UBUNTU 18_0" UUID="8E04-8F18" TYPE="vfat" PARTUUID="0009836c-01"
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/loop8: TYPE="squashfs"
/usr/share/boot-sav/bs-cmd_terminal.sh: line 179: warning: command substitution: ignored null byte in input
=================== efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0001,0000,2001,2002,2003
Boot0000* Linpus lite HD(1,MBR,0x9836c,0x800,0xee7800)/File(EFIBootgrubx64.efi)RC
Boot0001* Windows Boot Manager HD(1,GPT,fc0c1aa9-80c0-4f44-949b-2dc0396e12ab,0x800,0x82000)/File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...e............. ...
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot2003* EFI Network RC
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
=================== parted -lm:
BYT;
/dev/sda:8003MB:scsi:512:512:msdos:SanDisk Cruzer Blade:;
1:1049kB:8003MB:8002MB:fat32::boot, lba;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop0 loop squashfs 1.9G
loop1 loop squashfs 88.5M
loop2 loop squashfs 54.4M
loop3 loop squashfs 42.8M
loop4 loop squashfs 149.9M
loop5 loop squashfs 4M
loop6 loop squashfs 14.8M
loop7 loop squashfs 1008K
loop8 loop squashfs 3.7M
sda disk 7.5G
sda1 part vfat 7.5G UBUNTU 18_0
KNAME ROTA RO RM STATE MOUNTPOINT
loop0 1 1 0 /rofs
loop1 1 1 0 /snap/core/7270
loop2 1 1 0 /snap/core18/1066
loop3 1 1 0 /snap/gtk-common-themes/1313
loop4 1 1 0 /snap/gnome-3-28-1804/67
loop5 1 1 0 /snap/gnome-calculator/406
loop6 1 1 0 /snap/gnome-characters/296
loop7 1 1 0 /snap/gnome-logs/61
loop8 1 1 0 /snap/gnome-system-monitor/100
sda 1 0 1 running
sda1 1 0 1 /cdrom
=================== mount:
voila j'espere que tu as tout !
je vais voir ce matin apres ma chichi la page a voir qu'on ma donné, encore merci
chris
