Bonjour et merci pour ta réponse !
Voici les premières réponses:
C'est juste pour enregistrer des programmes TV derrière une box SFR, le risque est donc faible et assumé. 😉
Ce disque a été démonté d'un petit PC Samsung sous Windows et placé dans un boitier USB3, je n'ai jamais eu de problème avec.
Il a été formaté en NTFS hier sous Windows avec la méthode lente (1h10) sans aucune erreur.
Après je ne sais pas si c'est utile de lancer les tests de plusieurs heures ?
caille@caille-N76VB:~$ sudo smartctl --smart=on --offlineauto=on --saveauto=on /dev/sdb
[sudo] Mot de passe de caille :
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.3.0-28-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
SMART Attribute Autosave Enabled.
SMART Automatic Offline Testing Enabled every four hours.
caille@caille-N76VB:~$ sudo smartctl -H -i /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.3.0-28-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint M7
Device Model: SAMSUNG HM250HI
Serial Number: S20TJDQZ342947
LU WWN Device Id: 5 0024e9 0033c992d
Firmware Version: 2AC101C4
User Capacity: 250059350016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sat Feb 8 14:28:52 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
caille@caille-N76VB:~$ sudo smartctl -s on -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.3.0-28-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint M7
Device Model: SAMSUNG HM250HI
Serial Number: S20TJDQZ342947
LU WWN Device Id: 5 0024e9 0033c992d
Firmware Version: 2AC101C4
User Capacity: 250059350016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sat Feb 8 14:29:14 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 249) Self-test routine in progress...
90% of test remaining.
Total time to complete Offline
data collection: ( 4260) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 71) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 31
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 093 092 025 Pre-fail Always - 2390
4 Start_Stop_Count 0x0032 094 094 000 Old_age Always - 6600
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3080
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 096 096 000 Old_age Always - 4162
12 Power_Cycle_Count 0x0032 095 095 000 Old_age Always - 5582
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 2480
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 058 000 Old_age Always - 35 (Min/Max 9/43)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 180
223 Load_Retry_Count 0x0032 096 096 000 Old_age Always - 4162
225 Load_Cycle_Count 0x0032 094 094 000 Old_age Always - 66511
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 3079 -
# 2 Extended offline Self-test routine in progress 90% 3080 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Self_test_in_progress [90% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
caille@caille-N76VB:~$ sudo smartctl -t short /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.3.0-28-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Can't start self-test without aborting current test (90% remaining),
add '-t force' option to override, or run 'smartctl -X' to abort test.
caille@caille-N76VB:~$ sudo smartctl -t long /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.3.0-28-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Can't start self-test without aborting current test (90% remaining),
add '-t force' option to override, or run 'smartctl -X' to abort test.
caille@caille-N76VB:~$ sudo smartctl -l selftest /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.3.0-28-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 3079 -
# 2 Extended offline Self-test routine in progress 80% 3080 -
caille@caille-N76VB:~$ sudo smartctl -q errorsonly -H -l selftest /dev/sdb
caille@caille-N76VB:~$ sudo smartctl -t select,N-max /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.3.0-28-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=======> INVALID ARGUMENT TO -t: select,N-max
=======> VALID ARGUMENTS ARE: offline, short, long, conveyance, force, vendor,N, select,M-N, pending,N, afterselect,[on|off] <=======
=======> Option -t select,M-N must have non-negative integer M and N
Use smartctl -h to get a usage summary
caille@caille-N76VB:~$ sudo smartctl -a /dev/sdX | grep left
caille@caille-N76VB:~$
