Ce site est optimisé pour être consulté depuis un navigateur moderne dans lequel JavaScript est activé.

Problème au démarrage ubuntu

ricotta10

Bonjour,
Après avoir eu un message run fsck manuelle au démarrage j’ai lancé boot repair avec une clé usb.
Au redémarrage j’avais le même problème.
Merci de m’aider.
Voici le rapport boot repair :

 http://paste.ubuntu.com/p/Fr2kTGdFfF/plain/

ricotta10

Je ne suis pas sûre que vous puissiez lire le rapport.... dites moi si ça marche

xubu1957

Bonjour,

Lien > paste.ubuntu.com/p/Fr2kTGdFfF/

Nouvelle discussion autonome > Problème au démarrage ubuntu

ricotta10

J’ai donc (initramfs) en mode console au démarrage du système avec le curseur qui clignote.
Merci de m’aider

ricotta10

Bonjour,
Après avoir eu un message run fsck manually au démarrage j’ai lancé boot repair avec une clé usb.
Au redémarrage j’avais le même problème.

J’ai donc (initramfs) en mode console au démarrage du système avec le curseur qui clignote.
Merci de m’aider

Merci de m’aider.
Voici le rapport boot repair :

 Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => Grub2 (v1.99-2.00) is installed in the MBR of /dev/sda and looks at sector 
    1071124 of the same hard drive for core.img, but core.img can not be found 
    at this location.
 => Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/ubuntu/grub.cfg /EFI/Boot/bkpbootx64.efi 
                       /EFI/Boot/bootx64.efi /EFI/Boot/fbx64.efi 
                       /EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi 
                       /EFI/ubuntu/mmx64.efi /EFI/ubuntu/shimx64.efi

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04.4 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.03 0x4d8ae235
    Boot sector info:  Syslinux looks at sector 6800320 of /dev/sdb1 for its 
                       second stage. SYSLINUX is installed in the / 
                       directory. No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux.cfg /casper/vmlinuz.efi 
                       /EFI/BOOT/grubx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 698.7 GiB, 750156374016 bytes, 1465149168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 1,465,149,167 1,465,149,167  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sda1                 2,048     1,050,623     1,048,576 EFI System partition
/dev/sda2             1,050,624 1,465,147,391 1,464,096,768 Data partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 7.5 GiB, 8004304896 bytes, 15633408 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *             32    15,633,407    15,633,376   b W95 FAT32


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        13C1-5644                              vfat       
/dev/sda2        8133a5ce-2aa5-4c43-bb5c-fc7524153ba1   ext4       
/dev/sdb1        B02A-E391                              vfat       DCP_MMS
/dev/zram0       7588d515-b64b-4c19-a026-9091fc859c8c   swap       
/dev/zram1       569402d3-b2d5-4c1e-99df-5491a5aa0185   swap       
/dev/zram2       62755e03-373c-4175-a9d5-ed9b493ef069   swap       
/dev/zram3       5c9de89e-b27f-4d68-820a-3994f6d0399f   swap       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Feb 13 18:20 ata-HL-DT-ST_DVDRAM_GU71N_KW3D1JD5206 -> ../../sr0
lrwxrwxrwx 1 root root  9 Feb 13 18:22 ata-ST750LM022_HN-M750MBB_S2UQJ9DD301359 -> ../../sda
lrwxrwxrwx 1 root root 10 Feb 13 18:22 ata-ST750LM022_HN-M750MBB_S2UQJ9DD301359-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Feb 13 18:22 ata-ST750LM022_HN-M750MBB_S2UQJ9DD301359-part2 -> ../../sda2
lrwxrwxrwx 1 root root  9 Feb 13 18:22 usb-SanDisk_Cruzer_20053247430F0AC18FC0-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Feb 13 18:22 usb-SanDisk_Cruzer_20053247430F0AC18FC0-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root  9 Feb 13 18:22 wwn-0x50004cf20a04703a -> ../../sda
lrwxrwxrwx 1 root root 10 Feb 13 18:22 wwn-0x50004cf20a04703a-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Feb 13 18:22 wwn-0x50004cf20a04703a-part2 -> ../../sda2
lrwxrwxrwx 1 root root  9 Feb 13 18:20 wwn-0x5001480000000000 -> ../../sr0

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


========================== sda1/EFI/ubuntu/grub.cfg: ===========================

--------------------------------------------------------------------------------
search.fs_uuid 8133a5ce-2aa5-4c43-bb5c-fc7524153ba1 root hd0,gpt2 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------

=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  8133a5ce-2aa5-4c43-bb5c-fc7524153ba1
else
  search --no-floppy --fs-uuid --set=root 8133a5ce-2aa5-4c43-bb5c-fc7524153ba1
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=C
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=10
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=10
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 10 ; then
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-8133a5ce-2aa5-4c43-bb5c-fc7524153ba1' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  8133a5ce-2aa5-4c43-bb5c-fc7524153ba1
	else
	  search --no-floppy --fs-uuid --set=root 8133a5ce-2aa5-4c43-bb5c-fc7524153ba1
	fi
        linux	/boot/vmlinuz-4.15.0-76-generic root=UUID=8133a5ce-2aa5-4c43-bb5c-fc7524153ba1 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.15.0-76-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-8133a5ce-2aa5-4c43-bb5c-fc7524153ba1' {
	menuentry 'Ubuntu, with Linux 4.15.0-76-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-76-generic-advanced-8133a5ce-2aa5-4c43-bb5c-fc7524153ba1' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  8133a5ce-2aa5-4c43-bb5c-fc7524153ba1
		else
		  search --no-floppy --fs-uuid --set=root 8133a5ce-2aa5-4c43-bb5c-fc7524153ba1
		fi
		echo	'Loading Linux 4.15.0-76-generic ...'
	        linux	/boot/vmlinuz-4.15.0-76-generic root=UUID=8133a5ce-2aa5-4c43-bb5c-fc7524153ba1 ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.15.0-76-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-76-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-76-generic-recovery-8133a5ce-2aa5-4c43-bb5c-fc7524153ba1' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  8133a5ce-2aa5-4c43-bb5c-fc7524153ba1
		else
		  search --no-floppy --fs-uuid --set=root 8133a5ce-2aa5-4c43-bb5c-fc7524153ba1
		fi
		echo	'Loading Linux 4.15.0-76-generic ...'
	        linux	/boot/vmlinuz-4.15.0-76-generic root=UUID=8133a5ce-2aa5-4c43-bb5c-fc7524153ba1 ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.15.0-76-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-74-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-74-generic-advanced-8133a5ce-2aa5-4c43-bb5c-fc7524153ba1' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  8133a5ce-2aa5-4c43-bb5c-fc7524153ba1
		else
		  search --no-floppy --fs-uuid --set=root 8133a5ce-2aa5-4c43-bb5c-fc7524153ba1
		fi
		echo	'Loading Linux 4.15.0-74-generic ...'
	        linux	/boot/vmlinuz-4.15.0-74-generic root=UUID=8133a5ce-2aa5-4c43-bb5c-fc7524153ba1 ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.15.0-74-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-74-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-74-generic-recovery-8133a5ce-2aa5-4c43-bb5c-fc7524153ba1' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  8133a5ce-2aa5-4c43-bb5c-fc7524153ba1
		else
		  search --no-floppy --fs-uuid --set=root 8133a5ce-2aa5-4c43-bb5c-fc7524153ba1
		fi
		echo	'Loading Linux 4.15.0-74-generic ...'
	        linux	/boot/vmlinuz-4.15.0-74-generic root=UUID=8133a5ce-2aa5-4c43-bb5c-fc7524153ba1 ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.15.0-74-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/25_custom ###

menuentry "Boot UEFI bkpbootx64.efi" {
search --fs-uuid --no-floppy --set=root 13C1-5644
chainloader (${root})/EFI/Boot/bkpbootx64.efi
}

menuentry "Boot UEFI fbx64.efi" {
search --fs-uuid --no-floppy --set=root 13C1-5644
chainloader (${root})/EFI/Boot/fbx64.efi
}

menuentry "EFI/ubuntu/fwupx64.efi" {
search --fs-uuid --no-floppy --set=root 13C1-5644
chainloader (${root})/EFI/ubuntu/fwupx64.efi
}

menuentry "EFI/ubuntu/mmx64.efi" {
search --fs-uuid --no-floppy --set=root 13C1-5644
chainloader (${root})/EFI/ubuntu/mmx64.efi
}
### END /etc/grub.d/25_custom ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=8133a5ce-2aa5-4c43-bb5c-fc7524153ba1 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
#UUID=13C1-5644  /boot/efi       vfat    umask=0077      0       1
/swapfile                                 none            swap    sw              0       0
UUID=13C1-5644	/boot/efi	vfat	defaults	0	1
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 180.626705170 = 193.946447872  boot/grub/grub.cfg                             1
 481.235328674 = 516.722499584  boot/vmlinuz-4.15.0-74-generic                 1
 380.036109924 = 408.060665856  boot/vmlinuz-4.15.0-76-generic                 2
 380.036109924 = 408.060665856  vmlinuz                                        2
 481.235328674 = 516.722499584  vmlinuz.old                                    1
 380.071285248 = 408.098435072  boot/initrd.img-4.15.0-74-generic              4
 432.617584229 = 464.519593984  boot/initrd.img-4.15.0-76-generic              2
 432.617584229 = 464.519593984  initrd.img                                     2
 380.071285248 = 408.098435072  initrd.img.old                                 4

=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Boot-Repair-Disk session" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

============================== sdb1/syslinux.cfg: ==============================

--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100

label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --

label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit 

label ubnentry1
menu label ^64bit session
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/lubuntu.seed boot=casper  quiet splash --

label ubnentry2
menu label ^64bit session (failsafe)
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/lubuntu.seed boot=casper  noapic noapm nodma nomce nolapic nomodeset nosmp vga=normal --

label ubnentry3
menu label Boot-Repair-Disk session
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --

--------------------------------------------------------------------------------

=================== sdb1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/grub/grub.cfg                             1

================= sdb1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             syslinux.cfg                                   1
            ?? = ??             ldlinux.sys                                    1
            ?? = ??             menu.c32                                       1

============== sdb1: Version of COM32(R) files used by Syslinux: ===============

 menu.c32                           :  COM32R module (v4.xx)


ADDITIONAL INFORMATION :
=================== log of boot-repair 20200213_1822 ===================
boot-repair version : 4ppa62
boot-sav version : 4ppa62
boot-sav-extra version : 4ppa62
glade2script version : 3.2.3~ppa4
boot-repair is executed in live-session (Boot-Repair-Disk 64bit 1oct2017, zesty, Ubuntu, x86_64)
CPU op-mode(s):      32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --
ls: cannot access '/home/usr/.config': No such file or directory

=================== os-prober:
/dev/sda2:Ubuntu 18.04.4 LTS (18.04):Ubuntu:linux

=================== blkid:
/dev/sda1: UUID="13C1-5644" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="5da616bf-383d-439e-bc17-f3243a4629e1"
/dev/sda2: UUID="8133a5ce-2aa5-4c43-bb5c-fc7524153ba1" TYPE="ext4" PARTUUID="e2e0d69f-7c4e-42f9-a481-a11bd2bf9201"
/dev/sdb1: LABEL="DCP_MMS" UUID="B02A-E391" TYPE="vfat"
/dev/loop0: TYPE="squashfs"
/dev/zram0: UUID="7588d515-b64b-4c19-a026-9091fc859c8c" TYPE="swap"
/dev/zram1: UUID="569402d3-b2d5-4c1e-99df-5491a5aa0185" TYPE="swap"
/dev/zram2: UUID="62755e03-373c-4175-a9d5-ed9b493ef069" TYPE="swap"
/dev/zram3: UUID="5c9de89e-b27f-4d68-820a-3994f6d0399f" TYPE="swap"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

Presence of EFI/Boot file detected: /mnt/boot-sav/sda1/EFI/Boot/bkpbootx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda1/EFI/Boot/bootx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda1/EFI/Boot/fbx64.efi
Presence of bkp file detected: /mnt/boot-sav/sda1/EFI/Boot/bkpbootx64.efi

=================== sda2/etc/grub.d/ :
drwxr-xr-x  2 root root     4096 Feb 13 18:06 grub.d
total 84
-rwxr-xr-x 1 root root 10046 Feb  7  2019 00_header
-rwxr-xr-x 1 root root  6258 Jul 16  2018 05_debian_theme
-rwxr-xr-x 1 root root 12693 Jul 17  2018 10_linux
-rwxr-xr-x 1 root root 11298 Jul 17  2018 20_linux_xen
-rwxr-xr-x 1 root root  1992 Jan 28  2016 20_memtest86+
-rwxr-xr-x 1 root root   561 Feb 13 18:06 25_custom
-rwxr-xr-x 1 root root 12059 Jul 17  2018 30_os-prober
-rwxr-xr-x 1 root root  1418 Jul 17  2018 30_uefi-firmware
-rwxr-xr-x 1 root root   214 Jul 17  2018 40_custom
-rwxr-xr-x 1 root root   216 Jul 17  2018 41_custom
-rw-r--r-- 1 root root   483 Jul 17  2018 README




=================== sda2/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda2: UUID=13C1-5644	 (sda1)

=================== sda2recordfail=1/grub/grubenv :
recordfail=1



/usr/share/boot-sav/bs-cmd_terminal.sh: line 179: warning: command substitution: ignored null byte in input

=================== efibootmgr -v
BootCurrent: 0008
Timeout: 2 seconds
BootOrder: 0000,0008,0009
Boot0000* ubuntu	HD(1,GPT,5da616bf-383d-439e-bc17-f3243a4629e1,0x800,0x100000)/File(EFIubuntushimx64.efi)
Boot0008* UEFI: SanDisk Cruzer 1.26	PciRoot(0x0)/Pci(0x1d,0x0)/USB(1,0)/USB(1,0)/HD(1,MBR,0x0,0x20,0xee8be0)AMBO
Boot0009* ubuntu	HD(1,GPT,5da616bf-383d-439e-bc17-f3243a4629e1,0x800,0x100000)/File(EFIUbuntugrubx64.efi)

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sda1.
sda2	: sda,	not-sepboot,	grubenv-ng	grub2,	signed grub-pc grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda2.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:750GB:scsi:512:4096:gpt:ATA ST750LM022 HN-M7:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:750GB:750GB:ext4::;

BYT;
/dev/sdb:8004MB:scsi:512:512:msdos:SanDisk Cruzer:;
1:16.4kB:8004MB:8004MB:fat32::boot;

BYT;
/dev/zram3:767MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:767MB:767MB:linux-swap(v1)::;

BYT;
/dev/zram1:767MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:767MB:767MB:linux-swap(v1)::;

BYT;
/dev/zram2:767MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:767MB:767MB:linux-swap(v1)::;

BYT;
/dev/zram0:767MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:767MB:767MB:linux-swap(v1)::;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL
loop0 loop squashfs 629.3M
sda   disk          698.7G
sda1  part vfat       512M
sda2  part ext4     698.1G
sdb   disk            7.5G
sdb1  part vfat       7.5G DCP_MMS
sr0   rom            1024M
zram0 disk          731.3M
zram1 disk          731.3M
zram2 disk          731.3M
zram3 disk          731.3M

KNAME ROTA RO RM STATE   MOUNTPOINT
loop0    1  1  0         /rofs
sda      1  0  0 running
sda1     1  0  0         /mnt/boot-sav/sda1
sda2     1  0  0         /mnt/boot-sav/sda2
sdb      1  0  1 running
sdb1     1  0  1         /cdrom
sr0      1  0  1 running
zram0    0  0  0         [SWAP]
zram1    0  0  0         [SWAP]
zram2    0  0  0         [SWAP]
zram3    0  0  0         [SWAP]


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=2968140k,nr_inodes=742035,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=599068k,mode=755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=34,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=12054)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=599064k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw,relatime,data=ordered)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  acpi_thermal_rel autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hidraw1 hpet hugepages hwrng i2c-0 i2c-1 i2c-10 i2c-11 i2c-12 i2c-13 i2c-14 i2c-15 i2c-16 i2c-17 i2c-18 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 6d 6b 66 73 2e  66 61 74 00 02 08 20 00  |.X.mkfs.fat... .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 10 00 fe 03 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 44 56 c1 13 4e  4f 20 4e 41 4d 45 20 20  |..)DV..NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  2.9G     0  2.9G   0% /dev
tmpfs          tmpfs     586M  8.7M  577M   2% /run
/dev/sdb1      vfat      7.5G  816M  6.7G  11% /cdrom
/dev/loop0     squashfs  630M  630M     0 100% /rofs
/cow           overlay   2.9G  7.2M  2.9G   1% /
tmpfs          tmpfs     2.9G     0  2.9G   0% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     2.9G     0  2.9G   0% /sys/fs/cgroup
tmpfs          tmpfs     2.9G  256K  2.9G   1% /tmp
tmpfs          tmpfs     586M  4.0K  586M   1% /run/user/999
/dev/sda1      vfat      511M  7.4M  504M   2% /mnt/boot-sav/sda1
/dev/sda2      ext4      687G  544G  108G  84% /mnt/boot-sav/sda2

=================== fdisk -l:
Disk /dev/loop0: 629.3 MiB, 659873792 bytes, 1288816 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 698.7 GiB, 750156374016 bytes, 1465149168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 839888BC-47DC-4F65-8ED9-226D5A0784D8

Device       Start        End    Sectors   Size Type
/dev/sda1     2048    1050623    1048576   512M EFI System
/dev/sda2  1050624 1465147391 1464096768 698.1G Linux filesystem




Disk /dev/sdb: 7.5 GiB, 8004304896 bytes, 15633408 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000

Device     Boot Start      End  Sectors  Size Id Type
/dev/sdb1  *       32 15633407 15633376  7.5G  b W95 FAT32


Disk /dev/zram0: 731.3 MiB, 766803968 bytes, 187208 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/zram1: 731.3 MiB, 766803968 bytes, 187208 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/zram2: 731.3 MiB, 766803968 bytes, 187208 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/zram3: 731.3 MiB, 766803968 bytes, 187208 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes



=================== Recommended repair
The default repair of the Boot-Repair utility will reinstall the grub-efi-amd64-signed of sda2, using the following options:        sda1/boot/efi,
Additional repair will be performed: unhide-bootmenu-10s    use-standard-efi-file  restore-efi-backups


rm /mnt/boot-sav/sda1/efi/Boot/bootx64.efi
Mount sda1 on /mnt/boot-sav/sda2/boot/efi
efi files in sda1/efi: /ubuntu/shimx64.efi /ubuntu/mmx64.efi /ubuntu/grubx64.efi /ubuntu/fwupx64.efi /Boot/fbx64.efi /Boot/bootx64.efi
lspci: Unable to load libkmod resources: error -12

*******lspci -nnk | grep -iA3 vga
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09)
Subsystem: ASUSTeK Computer Inc. 3rd Gen Core processor Graphics Controller [1043:1587]
Kernel driver in use: i915
00:04.0 Signal processing controller [1180]: Intel Corporation 3rd Gen Core Processor Thermal Subsystem [8086:0153] (rev 09)
*******

grub-install --version
grub-install (GRUB) 2.02-2ubuntu8.14,grub-install (GRUB) 2.

chroot /mnt/boot-sav/sda2 efibootmgr -v
BootCurrent: 0008
Timeout: 2 seconds
BootOrder: 0000,0008,0009
Boot0000* ubuntu	HD(1,GPT,5da616bf-383d-439e-bc17-f3243a4629e1,0x800,0x100000)/File(EFIubuntushimx64.efi)
Boot0008* UEFI: SanDisk Cruzer 1.26	PciRoot(0x0)/Pci(0x1d,0x0)/USB(1,0)/USB(1,0)/HD(1,MBR,0x0,0x20,0xee8be0)AMBO
Boot0009* ubuntu	HD(1,GPT,5da616bf-383d-439e-bc17-f3243a4629e1,0x800,0x100000)/File(EFIUbuntugrubx64.efi)

chroot /mnt/boot-sav/sda2 uname -r
Kernel: 4.13.0-16-generic

Reinstall the grub-efi-amd64-signed of sda2
Installing for x86_64-efi platform.
Installation finished. No error reported.
grub-install --efi-directory=/boot/efi --target=x86_64-efi --uefi-secure-boot : exit code of grub-install :0
mv 25_custom
efi files in sda1/efi: /ubuntu/shimx64.efi /ubuntu/mmx64.efi /ubuntu/grubx64.efi /ubuntu/fwupx64.efi /Boot/fbx64.efi /Boot/bootx64.efi
df /dev/sda1
Save and rename /mnt/boot-sav/sda2/boot/efi/EFI/Boot/bootx64.efi (/mnt/boot-sav/sda2/boot/efi/EFI/Boot/bkpbootx64.efi)
cp /mnt/boot-sav/sda2/boot/efi/EFI/ubuntu/shimx64.efi /mnt/boot-sav/sda2/boot/efi/EFI/Boot/bootx64.efi
efi files in sda1/efi: /ubuntu/shimx64.efi /ubuntu/mmx64.efi /ubuntu/grubx64.efi /ubuntu/fwupx64.efi /Boot/fbx64.efi /Boot/bootx64.efi /Boot/bkpbootx64.efi
Add /mnt/boot-sav/sda2/boot/efi efi entries in /mnt/boot-sav/sda2/etc/grub.d/25_custom
Adding custom /mnt/boot-sav/sda2/boot/efi/EFI/Boot/bkpbootx64.efi
Adding custom /mnt/boot-sav/sda2/boot/efi/EFI/Boot/fbx64.efi
sda1/bkpbootx64.efi already added
sda1/fbx64.efi already added
Adding custom /mnt/boot-sav/sda2/boot/efi/EFI/ubuntu/fwupx64.efi
Adding custom /mnt/boot-sav/sda2/boot/efi/EFI/ubuntu/mmx64.efi
Installing for x86_64-efi platform.
Installation finished. No error reported.
grub-install --efi-directory=/boot/efi --target=x86_64-efi --uefi-secure-boot : exit code of grub-install :0

chroot /mnt/boot-sav/sda2 efibootmgr -v
BootCurrent: 0008
Timeout: 2 seconds
BootOrder: 0000,0008
Boot0000* ubuntu	HD(1,GPT,5da616bf-383d-439e-bc17-f3243a4629e1,0x800,0x100000)/File(EFIubuntushimx64.efi)
Boot0008* UEFI: SanDisk Cruzer 1.26	PciRoot(0x0)/Pci(0x1d,0x0)/USB(1,0)/USB(1,0)/HD(1,MBR,0x0,0x20,0xee8be0)AMBO

chroot /mnt/boot-sav/sda2 update-grub
Sourcing file `/etc/default/grub'
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-4.15.0-76-generic
Found initrd image: /boot/initrd.img-4.15.0-76-generic
Found linux image: /boot/vmlinuz-4.15.0-74-generic
Found initrd image: /boot/initrd.img-4.15.0-74-generic
Adding boot menu entry for EFI firmware configuration
Unhide GRUB boot menu in sda2/boot/grub/grub.cfg

Boot successfully repaired.

You can now reboot your computer.
Please do not forget to make your BIOS boot on sda1/EFI/ubuntu/shimx64.efi file!

nany

Bonjour,

ricotta10 a écrit un message run fsck manually au démarrage

J’ai donc (initramfs) en mode console au démarrage du système avec le curseur qui clignote.

Quel est le message exact d’initramfs ?

nany

Dans cet écran d’initramfs, saisis cette commande :

fsck -y /dev/sda2

Puis :

reboot

ricotta10

https://framapic.org/GYxeN6stA61e/GVSllyVGJUVg.jpeg

[sub]Modération : merci d'utiliser des images de petite taille (300x300) ou des miniatures pointant sur ces images (Des hébergeurs comme Toile Libre ou TDCT'Pix le permettent).[/sub]

ricotta10

Cela ne marche pas. J’ai le même écran de démarrage

nany

Que s’est-il passé après avoir saisi la commande ?

ricotta10

Quand je tape la première commande il me met

fsck from util-linux 2.31.1

Puis le Reboot le fait redémarrer

C’est pour cette raison que j’ai lancé un boot repair avec une clé usb.

nany

Essaie :

fsck -fy /dev/sda2

ricotta10

J’ai essayé et Il n’y a pas de changement.

nany

Il va falloir redémarrer sur un support d’installation ([doc]live_cd[/doc] ou [doc]live_usb[/doc]) pour tenter la manipulation en session live.

Donc, il faut démarrer une session live (essayer Ubuntu… ou try Ubuntu…) puis, dans un terminal, passer cette commande :

sudo fsck -y /dev/sda2

Copie/colle la commande pour être sûr qu’il n’y a pas d’erreur de frappe.

ricotta10

J’ai redémarré avec le live usb et j’ai ouvert un terminal en mettant la commande indiquée et j’ai le même retour c’est à dire:

fsck from util-linux 2.30.1

nany

Bon, on va vérifier l’état du disque.
Toujours en session live, donne les retours de :

sudo apt-get install --no-install-recommends smartmontools

 sudo smartctl -s on -a /dev/sda

ricotta10

lubuntu@lubuntu:~$ sudo apt-get install --no-install-recommends smartmontools
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Suggested packages:
  gsmartcontrol smart-notifier
Recommended packages:
  mailx | mailutils
The following NEW packages will be installed:
  smartmontools
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 464 kB of archives.
After this operation, 1774 kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu artful/main amd64 smartmontools amd64 6.5+svn4324-1 [464 kB]
Fetched 464 kB in 0s (1587 kB/s)     
Selecting previously unselected package smartmontools.
(Reading database ... 84611 files and directories currently installed.)
Preparing to unpack .../smartmontools_6.5+svn4324-1_amd64.deb ...
Unpacking smartmontools (6.5+svn4324-1) ...
Processing triggers for ureadahead (0.100.0-20) ...
Setting up smartmontools (6.5+svn4324-1) ...
Created symlink /etc/systemd/system/multi-user.target.wants/smartd.service → /lib/systemd/system/smartd.service.
Processing triggers for systemd (234-2ubuntu12) ...
Processing triggers for ureadahead (0.100.0-20) ...
lubuntu@lubuntu:~$

ricotta10

lubuntu@lubuntu:~$ sudo smartctl -s on -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.13.0-16-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Samsung SpinPoint M8 (AF)
Device Model:     ST750LM022 HN-M750MBB
Serial Number:    S2UQJ9DD301359
LU WWN Device Id: 5 0004cf 20a04703a
Firmware Version: 2AR10001
User Capacity:    750,156,374,016 bytes [750 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Thu Feb 13 22:36:18 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(10980) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 183) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       16000
  2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0
  3 Spin_Up_Time            0x0023   089   087   025    Pre-fail  Always       -       3465
  4 Start_Stop_Count        0x0032   092   092   000    Old_age   Always       -       8557
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       12362
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   096   096   000    Old_age   Always       -       4225
191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       439
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   064   055   000    Old_age   Always       -       31 (Min/Max 10/45)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       7
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       725
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       145
225 Load_Cycle_Count        0x0032   079   079   000    Old_age   Always       -       218522

SMART Error Log Version: 1
ATA Error Count: 2
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2 occurred at disk power-on lifetime: 12127 hours (505 days + 7 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 b8 d0 99 d3 e0  Error: UNC 184 sectors at LBA = 0x00d399d0 = 13867472

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 00 88 99 d3 e0 00      00:00:09.771  READ DMA
  c8 00 d8 e8 a8 d3 e0 00      00:00:09.771  READ DMA
  c8 00 00 d8 90 d3 e0 00      00:00:09.771  READ DMA
  c8 00 00 90 aa d3 e0 00      00:00:09.771  READ DMA
  c8 00 00 a0 a6 d3 e0 00      00:00:09.771  READ DMA

Error 1 occurred at disk power-on lifetime: 11999 hours (499 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 e0 98 d3 e0  Error: UNC 8 sectors at LBA = 0x00d398e0 = 13867232

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 e0 98 d3 e0 00      00:00:00.148  READ DMA
  25 00 08 70 e7 ff e0 00      00:00:00.148  READ DMA EXT
  25 00 08 e8 7a b0 e0 00      00:00:00.147  READ DMA EXT
  25 00 08 70 09 11 e0 00      00:00:00.147  READ DMA EXT
  ef 10 02 00 00 00 a0 00      00:00:00.147  SET FEATURES [Enable SATA feature]

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

lubuntu@lubuntu:~$

nany

197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       7

Avec cette ligne, on voit qu’il y a sept secteurs en attente de réallocation.
Mais je ne comprends pas pourquoi fsck ne donne rien.

191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       439

Là on voit que le disque est plutôt malmené. C’est un portable ?

Je ne sais pas trop déchiffrer les données smart. J’ai fait appel à quelqu’un qui s’y connaît mieux que moi.

ricotta10

Oui c’est un ordi portable.
Que voulez vous dire par malmené?

Page suivante »