Bonsoir à vous ;
J'ai sur mon ordi un pb récurent auquel je ne me suis jamais attelé et que les circonstances (confinement !) me laissent le temps de traiter .
Il s'agit de la désactivation intempestive de ma souris raccordée en filaire sur port USB .
Je m'étais un peu habitué au pb , qui disparaissait suite à un reboot ...
J'ai tout de même un petit doute sur le démarrage correct de tout l'environnement . En effet, le dmesg laisse apparaître quelques erreurs .
Tout d'abord celle-ci :
[ 0.859132] ERROR: Unable to locate IOAPIC for GSI 56
et ensuite celles-ci :
[ 5.966940] usb 1-2: device not accepting address 6, error -71
[ 6.282902] usb 1-2: new high-speed USB device number 7 using ehci-pci
[ 6.818869] usb 1-2: device not accepting address 7, error -71
Voici le dmesg dans son entier :
xx@pc-yy:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-145-generic (buildd@lcy01-amd64-027) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.10) ) #171-Ubuntu SMP Tue Mar 26 12:43:40 UTC 2019 (Ubuntu 4.4.0-145.171-generic 4.4.176)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-145-generic root=UUID=4629d1ac-7daa-49e9-a167-e0547bb3e62e ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] tseg: 009f000000
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009c5d5fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009c5d6000-0x000000009c605fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009c606000-0x000000009c8d9fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009c8da000-0x000000009c9a6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009c9a7000-0x000000009e166fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009e167000-0x000000009e1c3fff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000009e1c4000-0x000000009e1c4fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e1c5000-0x000000009e3cafff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009e3cb000-0x000000009e84ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e850000-0x000000009efe0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009efe1000-0x000000009effffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0x9c95e000 ACPI 2.0=0x9c95e000 SMBIOS=0xf04c0 MPS=0xfd400
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A88XM-D3H, BIOS F5 01/09/2014
[ 0.000000] Kernel/User page tables isolation: disabled
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000013f000000 aka 5104M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xa0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9f000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd6d0-0x000fd6df] mapped at [ffff8800000fd6d0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 28672
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
[ 0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE
[ 0.000000] BRK [0x02210000, 0x02210fff] PGTABLE
[ 0.000000] BRK [0x02211000, 0x02211fff] PGTABLE
[ 0.000000] BRK [0x02212000, 0x02212fff] PGTABLE
[ 0.000000] BRK [0x02213000, 0x02213fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3331a000-0x35984fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000009C95E000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000009C95E080 000084 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009C9647A0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150930/tbfadt-654)
[ 0.000000] ACPI: DSDT 0x000000009C95E1A0 006600 (v02 ALASKA A M I 00000088 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000009C99C080 000040
[ 0.000000] ACPI: APIC 0x000000009C9648B0 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000009C964930 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000009C964978 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x000000009C9649B8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: IVRS 0x000000009C9649F0 000078 (v02 AMD BANTRY 00000001 AMD 00000000)
[ 0.000000] ACPI: BGRT 0x000000009C964A68 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000009C964AA0 000B9C (v01 AMD BANTRY 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009C965640 00033B (v02 AMD BANTRY 00000002 MSFT 04000000)
[ 0.000000] ACPI: CRAT 0x000000009C965980 000550 (v01 AMD BANTRY 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009C965ED0 0013A4 (v01 AMD CPMDFIGP 00000001 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x000000009C967278 001120 (v01 AMD CPMCMN 00000001 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13eff5000-0x13eff9fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000009c5d5fff]
[ 0.000000] node 0: [mem 0x000000009c606000-0x000000009c8d9fff]
[ 0.000000] node 0: [mem 0x000000009e1c4000-0x000000009e1c4fff]
[ 0.000000] node 0: [mem 0x000000009e3cb000-0x000000009e84ffff]
[ 0.000000] node 0: [mem 0x000000009efe1000-0x000000009effffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000013effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013effffff]
[ 0.000000] On node 0 totalpages: 900334
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 26 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9974 pages used for memmap
[ 0.000000] DMA32 zone: 638287 pages, LIFO batch:31
[ 0.000000] Normal zone: 4032 pages used for memmap
[ 0.000000] Normal zone: 258048 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c5d6000-0x9c605fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c8da000-0x9c9a6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c9a7000-0x9e166fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e167000-0x9e1c3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e1c5000-0x9e3cafff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e850000-0x9efe0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x9f000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 34 pages/cpu @ffff88013ec00000 s99480 r8192 d31592 u524288
[ 0.000000] pcpu-alloc: s99480 r8192 d31592 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 886238
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-145-generic root=UUID=4629d1ac-7daa-49e9-a167-e0547bb3e62e ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3228580K/3601336K available (8608K kernel code, 1333K rwdata, 4008K rodata, 1484K init, 1284K bss, 372756K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:1000 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3094.629 MHz processor
[ 0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 6189.25 BogoMIPS (lpj=12378516)
[ 0.000031] pid_max: default: 32768 minimum: 301
[ 0.000039] ACPI: Core revision 20150930
[ 0.004132] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.004818] Security Framework initialized
[ 0.004822] Yama: becoming mindful.
[ 0.004839] AppArmor: AppArmor initialized
[ 0.005079] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006188] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.006706] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.006715] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.006928] Initializing cgroup subsys io
[ 0.006936] Initializing cgroup subsys memory
[ 0.006946] Initializing cgroup subsys devices
[ 0.006951] Initializing cgroup subsys freezer
[ 0.006955] Initializing cgroup subsys net_cls
[ 0.006960] Initializing cgroup subsys perf_event
[ 0.006964] Initializing cgroup subsys net_prio
[ 0.006969] Initializing cgroup subsys hugetlb
[ 0.006973] Initializing cgroup subsys pids
[ 0.006996] mce: CPU supports 7 MCE banks
[ 0.007005] LVT offset 1 assigned for vector 0xf9
[ 0.007013] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.007016] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.007020] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.007023] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.007029] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.007400] Freeing SMP alternatives memory: 36K
[ 0.013858] ftrace: allocating 32283 entries in 127 pages
[ 0.032447] smpboot: APIC(10) Converting physical 1 to logical package 0
[ 0.032454] smpboot: Max logical packages: 2
[ 0.115108] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.259274] smpboot: CPU0: AMD A8-7600 Radeon R7, 10 Compute Cores 4C+6G (family: 0x15, model: 0x30, stepping: 0x1)
[ 0.259294] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.259302] ... version: 0
[ 0.259305] ... bit width: 48
[ 0.259307] ... generic registers: 6
[ 0.259310] ... value mask: 0000ffffffffffff
[ 0.259313] ... max period: 00007fffffffffff
[ 0.259316] ... fixed-purpose events: 0
[ 0.259319] ... event mask: 000000000000003f
[ 0.260085] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.260179] x86: Booting SMP configuration:
[ 0.260183] .... node #0, CPUs: #1 #2 #3
[ 0.267116] x86: Booted up 1 node, 4 CPUs
[ 0.267124] smpboot: Total of 4 processors activated (24757.03 BogoMIPS)
[ 0.267955] devtmpfs: initialized
[ 0.270080] evm: security.selinux
[ 0.270083] evm: security.SMACK64
[ 0.270086] evm: security.SMACK64EXEC
[ 0.270089] evm: security.SMACK64TRANSMUTE
[ 0.270092] evm: security.SMACK64MMAP
[ 0.270094] evm: security.ima
[ 0.270097] evm: security.capability
[ 0.270264] PM: Registering ACPI NVS region [mem 0x9c8da000-0x9c9a6fff] (839680 bytes)
[ 0.270279] PM: Registering ACPI NVS region [mem 0x9e1c5000-0x9e3cafff] (2121728 bytes)
[ 0.270374] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.270390] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.270492] pinctrl core: initialized pinctrl subsystem
[ 0.270658] RTC time: 10:44:02, date: 03/18/20
[ 0.270787] NET: Registered protocol family 16
[ 0.279300] cpuidle: using governor ladder
[ 0.285029] cpuidle: using governor menu
[ 0.285055] PCCT header not found.
[ 0.285250] ACPI: bus type PCI registered
[ 0.285255] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.285407] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.285414] PCI: not using MMCONFIG
[ 0.285417] PCI: Using configuration type 1 for base access
[ 0.285420] PCI: Using configuration type 1 for extended access
[ 0.293696] ACPI: Added _OSI(Module Device)
[ 0.293704] ACPI: Added _OSI(Processor Device)
[ 0.293707] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.293711] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.295493] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.298380] ACPI: Interpreter enabled
[ 0.298402] ACPI: (supports S0 S3 S4 S5)
[ 0.298405] ACPI: Using IOAPIC for interrupt routing
[ 0.298568] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.298604] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.298620] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.299043] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.299155] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.299273] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.304255] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.304265] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.304439] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.304750] PCI host bridge to bus 0000:00
[ 0.304755] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.304759] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.304763] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.304767] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.304772] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.304778] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.304783] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[ 0.304789] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.304798] pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
[ 0.304920] pci 0000:00:00.2: [1022:1423] type 00 class 0x080600
[ 0.305043] pci 0000:00:01.0: [1002:1313] type 00 class 0x030000
[ 0.305058] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.305065] pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
[ 0.305070] pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
[ 0.305075] pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff]
[ 0.305080] pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref]
[ 0.305099] pci 0000:00:01.0: supports D1 D2
[ 0.305101] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.305171] pci 0000:00:01.1: [1002:1308] type 00 class 0x040300
[ 0.305185] pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit]
[ 0.305211] pci 0000:00:01.1: supports D1 D2
[ 0.305331] pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
[ 0.305436] pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
[ 0.305509] pci 0000:00:03.1: [1022:1426] type 01 class 0x060400
[ 0.305550] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.305681] pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
[ 0.305809] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.305844] pci 0000:00:10.0: reg 0x10: [mem 0xfeb6a000-0xfeb6bfff 64bit]
[ 0.305924] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.305967] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.306042] pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
[ 0.306077] pci 0000:00:10.1: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit]
[ 0.306150] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.306194] pci 0000:00:10.1: System wakeup disabled by ACPI
[ 0.306267] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.306289] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
[ 0.306298] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
[ 0.306306] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
[ 0.306314] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
[ 0.306322] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
[ 0.306330] pci 0000:00:11.0: reg 0x24: [mem 0xfeb71000-0xfeb717ff]
[ 0.306443] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.306456] pci 0000:00:12.0: reg 0x10: [mem 0xfeb70000-0xfeb70fff]
[ 0.306530] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.306599] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.306620] pci 0000:00:12.2: reg 0x10: [mem 0xfeb6f000-0xfeb6f0ff]
[ 0.306677] pci 0000:00:12.2: supports D1 D2
[ 0.306679] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.306714] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.306784] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.306797] pci 0000:00:13.0: reg 0x10: [mem 0xfeb6e000-0xfeb6efff]
[ 0.306871] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.306941] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.306962] pci 0000:00:13.2: reg 0x10: [mem 0xfeb6d000-0xfeb6d0ff]
[ 0.307019] pci 0000:00:13.2: supports D1 D2
[ 0.307020] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.307054] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.307131] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.307276] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.307298] pci 0000:00:14.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff 64bit]
[ 0.307346] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.307381] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.307447] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.307589] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.307647] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.307713] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[ 0.307726] pci 0000:00:14.5: reg 0x10: [mem 0xfeb6c000-0xfeb6cfff]
[ 0.307801] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.307868] pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
[ 0.307931] pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
[ 0.307992] pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
[ 0.308053] pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
[ 0.308118] pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
[ 0.308183] pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
[ 0.308352] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.308381] pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.308402] pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea00fff 64bit]
[ 0.308416] pci 0000:01:00.0: reg 0x20: [mem 0xd0800000-0xd0803fff 64bit pref]
[ 0.308468] pci 0000:01:00.0: supports D1 D2
[ 0.308470] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.315300] pci 0000:00:03.1: PCI bridge to [bus 01]
[ 0.315312] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
[ 0.315315] pci 0000:00:03.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.315320] pci 0000:00:03.1: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.315512] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.315523] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.315525] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.315527] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 0.315529] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.315530] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.315532] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.315534] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[ 0.316276] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.316341] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.316401] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.316459] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.316506] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.316543] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.316580] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.316617] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.317006] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.317013] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.317024] vgaarb: loaded
[ 0.317027] vgaarb: bridge control possible 0000:00:01.0
[ 0.317271] SCSI subsystem initialized
[ 0.317349] libata version 3.00 loaded.
[ 0.317377] ACPI: bus type USB registered
[ 0.317397] usbcore: registered new interface driver usbfs
[ 0.317410] usbcore: registered new interface driver hub
[ 0.317434] usbcore: registered new device driver usb
[ 0.317661] PCI: Using ACPI for IRQ routing
[ 0.324477] PCI: pci_cache_line_size set to 64 bytes
[ 0.324531] e820: reserve RAM buffer [mem 0x9c5d6000-0x9fffffff]
[ 0.324533] e820: reserve RAM buffer [mem 0x9c8da000-0x9fffffff]
[ 0.324534] e820: reserve RAM buffer [mem 0x9e1c5000-0x9fffffff]
[ 0.324536] e820: reserve RAM buffer [mem 0x9e850000-0x9fffffff]
[ 0.324537] e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
[ 0.324538] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[ 0.324668] NetLabel: Initializing
[ 0.324674] NetLabel: domain hash size = 128
[ 0.324676] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.324690] NetLabel: unlabeled traffic allowed by default
[ 0.324939] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.324946] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.327142] clocksource: Switched to clocksource hpet
[ 0.333922] AppArmor: AppArmor Filesystem Enabled
[ 0.334003] pnp: PnP ACPI init
[ 0.334132] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.334140] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.334224] system 00:01: [mem 0xa0000000-0xbfffffff] has been reserved
[ 0.334230] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.334307] system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved
[ 0.334314] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.334476] system 00:03: [io 0x0220-0x0227] has been reserved
[ 0.334481] system 00:03: [io 0x0228-0x0237] has been reserved
[ 0.334485] system 00:03: [io 0x0a20-0x0a2f] has been reserved
[ 0.334491] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.334805] pnp 00:04: [dma 0 disabled]
[ 0.334852] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.335163] pnp 00:05: [dma 0 disabled]
[ 0.335266] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.335315] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.335340] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.335510] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.335517] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.335798] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.335804] system 00:09: [io 0x040b] has been reserved
[ 0.335809] system 00:09: [io 0x04d6] has been reserved
[ 0.335813] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.335816] system 00:09: [io 0x0c14] has been reserved
[ 0.335820] system 00:09: [io 0x0c50-0x0c51] has been reserved
[ 0.335824] system 00:09: [io 0x0c52] has been reserved
[ 0.335828] system 00:09: [io 0x0c6c] has been reserved
[ 0.335832] system 00:09: [io 0x0c6f] has been reserved
[ 0.335835] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
[ 0.335839] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
[ 0.335843] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
[ 0.335847] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
[ 0.335851] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
[ 0.335855] system 00:09: [io 0x0800-0x089f] has been reserved
[ 0.335859] system 00:09: [io 0x0b20-0x0b3f] has been reserved
[ 0.335863] system 00:09: [io 0x0900-0x090f] has been reserved
[ 0.335866] system 00:09: [io 0x0910-0x091f] has been reserved
[ 0.335871] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 0.335876] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.335880] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.335885] system 00:09: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.335889] system 00:09: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.335894] system 00:09: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.335899] system 00:09: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.335903] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 0.335908] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.336121] pnp: PnP ACPI: found 10 devices
[ 0.343441] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.343477] pci 0000:00:03.1: PCI bridge to [bus 01]
[ 0.343483] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
[ 0.343489] pci 0000:00:03.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.343494] pci 0000:00:03.1: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.343503] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.343517] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.343519] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.343521] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.343522] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.343524] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.343526] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.343527] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.343529] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.343531] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.343532] pci_bus 0000:01: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.343534] pci_bus 0000:02: resource 4 [io 0x0000-0x03af window]
[ 0.343536] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.343538] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df window]
[ 0.343539] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff window]
[ 0.343541] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.343542] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.343544] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.343582] NET: Registered protocol family 2
[ 0.343761] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.343853] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.343997] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.344049] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.344070] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.344158] NET: Registered protocol family 1
[ 0.344183] pci 0000:00:01.0: Video device with shadowed ROM
[ 0.345517] PCI: CLS 64 bytes, default 64
[ 0.345577] Unpacking initramfs...
[ 0.858837] Freeing initrd memory: 39340K
[ 0.858906] AMD-Vi: IOMMU performance counters supported
[ 0.858920] AMD-Vi: Applying ATS write check workaround for IOMMU at 0000:00:00.2
[ 0.859132] ERROR: Unable to locate IOAPIC for GSI 56
[ 0.859137] pci 0000:00:00.2: PCI INT A: failed to register GSI
[ 0.859515] iommu: Adding device 0000:00:00.0 to group 0
[ 0.859875] iommu: Adding device 0000:00:01.0 to group 1
[ 0.859895] iommu: Using direct mapping for device 0000:00:01.0
[ 0.859919] iommu: Adding device 0000:00:01.1 to group 1
[ 0.860222] iommu: Adding device 0000:00:02.0 to group 2
[ 0.860560] iommu: Adding device 0000:00:03.0 to group 3
[ 0.860577] iommu: Adding device 0000:00:03.1 to group 3
[ 0.860916] iommu: Adding device 0000:00:04.0 to group 4
[ 0.861326] iommu: Adding device 0000:00:10.0 to group 5
[ 0.861408] iommu: Adding device 0000:00:10.1 to group 5
[ 0.861742] iommu: Adding device 0000:00:11.0 to group 6
[ 0.862086] iommu: Adding device 0000:00:12.0 to group 7
[ 0.862102] iommu: Adding device 0000:00:12.2 to group 7
[ 0.862449] iommu: Adding device 0000:00:13.0 to group 8
[ 0.862466] iommu: Adding device 0000:00:13.2 to group 8
[ 0.862816] iommu: Adding device 0000:00:14.0 to group 9
[ 0.862833] iommu: Adding device 0000:00:14.2 to group 9
[ 0.862849] iommu: Adding device 0000:00:14.3 to group 9
[ 0.863279] iommu: Adding device 0000:00:14.4 to group 10
[ 0.863632] iommu: Adding device 0000:00:14.5 to group 11
[ 0.864006] iommu: Adding device 0000:00:18.0 to group 12
[ 0.864025] iommu: Adding device 0000:00:18.1 to group 12
[ 0.864043] iommu: Adding device 0000:00:18.2 to group 12
[ 0.864060] iommu: Adding device 0000:00:18.3 to group 12
[ 0.864078] iommu: Adding device 0000:00:18.4 to group 12
[ 0.864102] iommu: Adding device 0000:00:18.5 to group 12
[ 0.864117] iommu: Adding device 0000:01:00.0 to group 3
[ 0.864560] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.864566] AMD-Vi: Extended features: PPR GT IA PC
[ 0.864572] AMD-Vi: Interrupt remapping enabled
[ 0.864901] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.866362] perf: AMD NB counters detected
[ 0.866556] LVT offset 0 assigned for vector 0x400
[ 0.866572] perf: AMD IBS detected (0x000001ff)
[ 0.866582] perf: amd_iommu: Detected. (2 banks, 4 counters/bank)
[ 0.866702] Scanning for low memory corruption every 60 seconds
[ 0.867251] audit: initializing netlink subsys (disabled)
[ 0.867281] audit: type=2000 audit(1584528242.684:1): initialized
[ 0.867624] Initialise system trusted keyring
[ 0.867830] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.867835] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.869234] zbud: loaded
[ 0.869685] VFS: Disk quotas dquot_6.6.0
[ 0.869719] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.869982] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.870415] fuse init (API version 7.23)
[ 0.870572] Key type big_key registered
[ 0.870591] Allocating IMA MOK and blacklist keyrings.
[ 0.871252] Key type asymmetric registered
[ 0.871257] Asymmetric key parser 'x509' registered
[ 0.871292] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.871372] io scheduler noop registered
[ 0.871382] io scheduler deadline registered (default)
[ 0.871440] io scheduler cfq registered
[ 0.871796] pcieport 0000:00:03.1: Signaling PME through PCIe PME interrupt
[ 0.871803] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.871809] pcie_pme 0000:00:03.1:pcie01: service driver pcie_pme loaded
[ 0.871816] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.871826] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.871871] efifb: probing for efifb
[ 0.871896] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90000c00000, using 3072k, total 3072k
[ 0.871902] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.871905] efifb: scrolling: redraw
[ 0.871908] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.873518] Console: switching to colour frame buffer device 128x48
[ 0.874881] fb0: EFI VGA frame buffer device
[ 0.874983] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.875012] ACPI: Power Button [PWRB]
[ 0.875063] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.875155] ACPI: Power Button [PWRF]
[ 0.875220] ACPI: acpi_idle registered with cpuidle
[ 0.875853] GHES: HEST is not enabled!
[ 0.876025] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.896486] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.898374] Linux agpgart interface v0.103
[ 0.901068] loop: module loaded
[ 0.901318] libphy: Fixed MDIO Bus: probed
[ 0.901336] tun: Universal TUN/TAP device driver, 1.6
[ 0.901353] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.901482] PPP generic driver version 2.4.2
[ 0.901597] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.901624] ehci-pci: EHCI PCI platform driver
[ 0.901819] QUIRK: Enable AMD PLL fix
[ 0.901846] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 0.901871] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.901899] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.901963] ehci-pci 0000:00:12.2: debug port 1
[ 0.902021] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6f000
[ 0.911309] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.911392] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.912072] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.912742] usb usb1: Product: EHCI Host Controller
[ 0.913397] usb usb1: Manufacturer: Linux 4.4.0-145-generic ehci_hcd
[ 0.914053] usb usb1: SerialNumber: 0000:00:12.2
[ 0.914974] hub 1-0:1.0: USB hub found
[ 0.915719] hub 1-0:1.0: 5 ports detected
[ 0.916738] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.917396] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.918055] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.918781] ehci-pci 0000:00:13.2: debug port 1
[ 0.919548] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6d000
[ 0.931316] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.932044] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.932709] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.933359] usb usb2: Product: EHCI Host Controller
[ 0.934002] usb usb2: Manufacturer: Linux 4.4.0-145-generic ehci_hcd
[ 0.934647] usb usb2: SerialNumber: 0000:00:13.2
[ 0.935704] hub 2-0:1.0: USB hub found
[ 0.936373] hub 2-0:1.0: 5 ports detected
[ 0.937243] ehci-platform: EHCI generic platform driver
[ 0.937882] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.938512] ohci-pci: OHCI PCI platform driver
[ 0.939385] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 0.940028] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.940759] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb70000
[ 0.999343] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.999973] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.000581] usb usb3: Product: OHCI PCI host controller
[ 1.001181] usb usb3: Manufacturer: Linux 4.4.0-145-generic ohci_hcd
[ 1.001779] usb usb3: SerialNumber: 0000:00:12.0
[ 1.002732] hub 3-0:1.0: USB hub found
[ 1.003404] hub 3-0:1.0: 5 ports detected
[ 1.004299] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.004888] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 1.005570] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6e000
[ 1.063334] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.063941] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.064534] usb usb4: Product: OHCI PCI host controller
[ 1.065122] usb usb4: Manufacturer: Linux 4.4.0-145-generic ohci_hcd
[ 1.065712] usb usb4: SerialNumber: 0000:00:13.0
[ 1.066585] hub 4-0:1.0: USB hub found
[ 1.067200] hub 4-0:1.0: 5 ports detected
[ 1.068119] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.068705] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[ 1.069317] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb6c000
[ 1.127326] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.127945] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.128541] usb usb5: Product: OHCI PCI host controller
[ 1.129126] usb usb5: Manufacturer: Linux 4.4.0-145-generic ohci_hcd
[ 1.129710] usb usb5: SerialNumber: 0000:00:14.5
[ 1.130583] hub 5-0:1.0: USB hub found
[ 1.131189] hub 5-0:1.0: 2 ports detected
[ 1.131952] ohci-platform: OHCI generic platform driver
[ 1.132555] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.133351] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.133945] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[ 1.134785] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
[ 1.135650] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.136270] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.136871] usb usb6: Product: xHCI Host Controller
[ 1.137466] usb usb6: Manufacturer: Linux 4.4.0-145-generic xhci-hcd
[ 1.138066] usb usb6: SerialNumber: 0000:00:10.0
[ 1.138928] hub 6-0:1.0: USB hub found
[ 1.139612] hub 6-0:1.0: 2 ports detected
[ 1.140323] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.140916] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
[ 1.141598] usb usb7: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.142222] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.142831] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.143503] usb usb7: Product: xHCI Host Controller
[ 1.144126] usb usb7: Manufacturer: Linux 4.4.0-145-generic xhci-hcd
[ 1.144742] usb usb7: SerialNumber: 0000:00:10.0
[ 1.145604] hub 7-0:1.0: USB hub found
[ 1.146262] hub 7-0:1.0: 2 ports detected
[ 1.147160] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.147774] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
[ 1.148599] xhci_hcd 0000:00:10.1: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
[ 1.149438] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.150048] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.150664] usb usb8: Product: xHCI Host Controller
[ 1.151329] usb usb8: Manufacturer: Linux 4.4.0-145-generic xhci-hcd
[ 1.151959] usb usb8: SerialNumber: 0000:00:10.1
[ 1.152840] hub 8-0:1.0: USB hub found
[ 1.153529] hub 8-0:1.0: 2 ports detected
[ 1.154284] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.154885] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 9
[ 1.155597] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.156242] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.156855] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.157476] usb usb9: Product: xHCI Host Controller
[ 1.158094] usb usb9: Manufacturer: Linux 4.4.0-145-generic xhci-hcd
[ 1.158715] usb usb9: SerialNumber: 0000:00:10.1
[ 1.159548] hub 9-0:1.0: USB hub found
[ 1.160247] hub 9-0:1.0: 2 ports detected
[ 1.161047] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.162320] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.162952] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.163898] mousedev: PS/2 mouse device common for all mice
[ 1.164932] rtc_cmos 00:07: RTC can wake from S4
[ 1.165867] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.166583] rtc_cmos 00:07: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.167245] i2c /dev entries driver
[ 1.167937] device-mapper: uevent: version 1.0.3
[ 1.168755] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.169420] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.170054] EFI Variables Facility v0.08 2004-May-17
[ 1.176795] NET: Registered protocol family 10
[ 1.177924] NET: Registered protocol family 17
[ 1.178584] Key type dns_resolver registered
[ 1.179684] microcode: CPU0: patch_level=0x06003103
[ 1.180327] microcode: CPU1: patch_level=0x06003103
[ 1.180949] microcode: CPU2: patch_level=0x06003103
[ 1.181639] microcode: CPU3: patch_level=0x06003103
[ 1.182487] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.183332] registered taskstats version 1
[ 1.183949] Loading compiled-in X.509 certificates
[ 1.185249] Loaded X.509 cert 'Build time autogenerated kernel key: 766cb56454e39ea623681e1efb4bf4db48a2396c'
[ 1.185884] zswap: loaded using pool lzo/zbud
[ 1.189382] Key type trusted registered
[ 1.194860] Key type encrypted registered
[ 1.195576] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.196204] ima: No TPM chip found, activating TPM-bypass!
[ 1.196819] ima: Allocated hash algorithm: sha1
[ 1.197443] evm: HMAC attrs: 0x1
[ 1.198419] Magic number: 12:78:730
[ 1.199189] rtc_cmos 00:07: setting system clock to 2020-03-18 10:44:03 UTC (1584528243)
[ 1.200104] acpi-cpufreq: overriding BIOS provided _PSD data
[ 1.201060] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.201681] EDD information not available.
[ 1.202369] PM: Hibernation image not present or could not be loaded.
[ 1.203794] Freeing unused kernel memory: 1484K
[ 1.239296] Write protecting the kernel read-only data: 14336k
[ 1.240675] Freeing unused kernel memory: 1620K
[ 1.241666] Freeing unused kernel memory: 88K
[ 1.261796] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.262537] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.262754] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.262785] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.264440] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.265080] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.270413] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.271155] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.271759] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.272748] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.308683] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.313727] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.314442] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 1.315400] acpi device:02: registered as cooling_device4
[ 1.316170] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4
[ 1.328395] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.329830] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xffffc900006e6000, 74:d4:35:b1:ed:c7, XID 0c900800 IRQ 37
[ 1.330567] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.331532] [drm] Initialized drm 1.1.0 20060810
[ 1.334470] ahci 0000:00:11.0: version 3.0
[ 1.334814] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x13 impl SATA mode
[ 1.335618] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.336377] ahci 0000:00:11.0: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
[ 1.339141] scsi host0: ahci
[ 1.340099] scsi host1: ahci
[ 1.341042] scsi host2: ahci
[ 1.342266] scsi host3: ahci
[ 1.343314] scsi host4: ahci
[ 1.344146] ata1: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71100 irq 38
[ 1.344918] ata2: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71180 irq 39
[ 1.345675] ata3: DUMMY
[ 1.346392] ata4: DUMMY
[ 1.347113] ata5: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71300 irq 42
[ 1.368508] [drm] radeon kernel modesetting enabled.
[ 1.372387] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.375991] Found CRAT image with size=1360
[ 1.376672] Parsing CRAT table with 1 nodes
[ 1.377318] Found CU entry in CRAT table with proximity_domain=0 caps=0
[ 1.377960] CU CPU: cores=4 id_base=16
[ 1.378589] Found CU entry in CRAT table with proximity_domain=0 caps=0
[ 1.379248] CU GPU: simds=32 id_base=-2147483648
[ 1.379892] Found memory entry in CRAT table with proximity_domain=0
[ 1.380717] Found memory entry in CRAT table with proximity_domain=0
[ 1.381360] Found cache entry in CRAT table with processor_id=16
[ 1.382000] Found cache entry in CRAT table with processor_id=16
[ 1.382613] Found cache entry in CRAT table with processor_id=16
[ 1.383243] Found cache entry in CRAT table with processor_id=17
[ 1.383859] Found cache entry in CRAT table with processor_id=18
[ 1.384466] Found cache entry in CRAT table with processor_id=18
[ 1.385039] Found cache entry in CRAT table with processor_id=18
[ 1.385611] Found cache entry in CRAT table with processor_id=19
[ 1.386164] Found TLB entry in CRAT table (not processing)
[ 1.386726] Found TLB entry in CRAT table (not processing)
[ 1.387317] Found TLB entry in CRAT table (not processing)
[ 1.387876] Found TLB entry in CRAT table (not processing)
[ 1.388430] Found TLB entry in CRAT table (not processing)
[ 1.388974] Found TLB entry in CRAT table (not processing)
[ 1.389518] Found TLB entry in CRAT table (not processing)
[ 1.390062] Found TLB entry in CRAT table (not processing)
[ 1.390584] Found TLB entry in CRAT table (not processing)
[ 1.391101] Found TLB entry in CRAT table (not processing)
[ 1.391601] Creating topology SYSFS entries
[ 1.392121] Finished initializing topology ret=0
[ 1.392735] kfd kfd: Initialized module
[ 1.393484] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[ 1.393487] fb: switching to radeondrmfb from EFI VGA
[ 1.393978] Console: switching to colour dummy device 80x25
[ 1.394677] [drm] initializing kernel modesetting (KAVERI 0x1002:0x1313 0x1002:0x0123).
[ 1.394704] [drm] register mmio base: 0xFEB00000
[ 1.394708] [drm] register mmio size: 262144
[ 1.394717] [drm] doorbell mmio base: 0xD0000000
[ 1.394720] [drm] doorbell mmio size: 8388608
[ 1.394789] ATOM BIOS: 113
[ 1.394871] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 1.394879] radeon 0000:00:01.0: GTT: 2048M 0x0000000020000000 - 0x000000009FFFFFFF
[ 1.394891] [drm] Detected VRAM RAM=512M, BAR=256M
[ 1.394895] [drm] RAM width 128bits DDR
[ 1.394987] [TTM] Zone kernel: Available graphics memory: 1763834 kiB
[ 1.394993] [TTM] Initializing pool allocator
[ 1.395000] [TTM] Initializing DMA pool allocator
[ 1.395087] [drm] radeon: 512M of VRAM memory ready
[ 1.395092] [drm] radeon: 2048M of GTT memory ready.
[ 1.395113] [drm] Loading kaveri Microcode
[ 1.395243] [drm] Internal thermal controller without fan control
[ 1.396190] [drm] radeon: dpm initialized
[ 1.398340] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[ 1.398359] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 1.427152] [drm] PCIE GART of 2048M enabled (table at 0x0000000000324000).
[ 1.427300] radeon 0000:00:01.0: WB enabled
[ 1.427313] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88008f763c00
[ 1.427323] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff88008f763c04
[ 1.427333] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff88008f763c08
[ 1.427342] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88008f763c0c
[ 1.427351] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff88008f763c10
[ 1.427772] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc90001036c98
[ 1.427937] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0xffff88008f763c18
[ 1.427947] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0xffff88008f763c1c
[ 1.427955] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.427960] [drm] Driver supports precise vblank timestamp query.
[ 1.428010] radeon 0000:00:01.0: radeon: using MSI.
[ 1.428043] [drm] radeon: irq initialized.
[ 1.429953] [drm] ring test on 0 succeeded in 3 usecs
[ 1.430034] [drm] ring test on 1 succeeded in 2 usecs
[ 1.430049] [drm] ring test on 2 succeeded in 2 usecs
[ 1.430180] [drm] ring test on 3 succeeded in 3 usecs
[ 1.430189] [drm] ring test on 4 succeeded in 3 usecs
[ 1.435147] usb 3-1: new low-speed USB device number 2 using ohci-pci
[ 1.463118] usb 8-2: new low-speed USB device number 2 using xhci_hcd
[ 1.475910] [drm] ring test on 5 succeeded in 1 usecs
[ 1.495796] [drm] UVD initialized successfully.
[ 1.535140] usb 4-2: new full-speed USB device number 2 using ohci-pci
[ 1.604373] usb 3-1: New USB device found, idVendor=046d, idProduct=c31c
[ 1.604385] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.604391] usb 3-1: Product: USB Keyboard
[ 1.604397] usb 3-1: Manufacturer: Logitech
[ 1.604990] [drm] ring test on 6 succeeded in 16 usecs
[ 1.605006] [drm] ring test on 7 succeeded in 4 usecs
[ 1.605010] [drm] VCE initialized successfully.
[ 1.606817] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.621546] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.625822] usb 8-2: New USB device found, idVendor=046d, idProduct=c05a
[ 1.625834] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.625841] usb 8-2: Product: USB Optical Mouse
[ 1.625847] usb 8-2: Manufacturer: Logitech
[ 1.626059] usb 8-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.639323] usbcore: registered new interface driver usbhid
[ 1.639334] usbhid: USB HID core driver
[ 1.642020] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:046D:C31C.0001/input/input6
[ 1.695569] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:12.0-1/input0
[ 1.699478] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/0003:046D:C31C.0002/input/input7
[ 1.755675] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:12.0-1/input1
[ 1.755881] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.0/0003:046D:C05A.0003/input/input8
[ 1.756080] hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:10.1-2/input0
[ 1.839186] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.839225] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.840062] ata2.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133
[ 1.840069] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.840819] ata2.00: configured for UDMA/133
[ 1.841625] ata1.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB01, max UDMA/100
[ 1.842493] ata1.00: configured for UDMA/100
[ 1.843159] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.844082] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224DB SB01 PQ: 0 ANSI: 5
[ 1.863081] tsc: Refined TSC clocksource calibration: 3094.475 MHz
[ 1.863086] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.863088] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.863104] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c9ae47356a, max_idle_ns: 440795281132 ns
[ 1.863306] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.863431] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.863759] scsi 1:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5
[ 1.864043] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.864059] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 1.864071] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.864136] sd 1:0:0:0: [sda] Write Protect is off
[ 1.864145] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.864194] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.891857] ata5.00: ATA-7: ST3320820AS, 3.AAD, max UDMA/133
[ 1.891869] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.904490] usb 4-2: New USB device found, idVendor=0a12, idProduct=0001
[ 1.904502] usb 4-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.904508] usb 4-2: Product: BT2.0
[ 1.907430] sda: sda1 sda2 sda3
[ 1.908108] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.950343] ata5.00: configured for UDMA/133
[ 1.950733] scsi 4:0:0:0: Direct-Access ATA ST3320820AS D PQ: 0 ANSI: 5
[ 1.951035] usb 1-2: new high-speed USB device number 3 using ehci-pci
[ 1.951120] sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.951180] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1.951229] sd 4:0:0:0: [sdb] Write Protect is off
[ 1.951237] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.951281] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.989956] sdb: sdb1
[ 1.990484] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 2.085555] usb 1-2: New USB device found, idVendor=04a9, idProduct=1722
[ 2.085566] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.085572] usb 1-2: Product: MP220 series
[ 2.085578] usb 1-2: Manufacturer: Canon
[ 2.085584] usb 1-2: SerialNumber: 602496
[ 2.103198] [drm] ib test on ring 1 succeeded in 0 usecs
[ 2.217346] usb-storage 1-2:1.2: USB Mass Storage device detected
[ 2.217517] scsi host5: usb-storage 1-2:1.2
[ 2.217631] usbcore: registered new interface driver usb-storage
[ 2.219494] usbcore: registered new interface driver uas
[ 2.603260] [drm] ib test on ring 2 succeeded in 0 usecs
[ 2.603334] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.603415] [drm] ib test on ring 4 succeeded in 0 usecs
[ 2.863281] clocksource: Switched to clocksource tsc
[ 3.123215] [drm] ib test on ring 5 succeeded
[ 3.143725] [drm] ib test on ring 6 succeeded
[ 3.144355] [drm] ib test on ring 7 succeeded
[ 3.146044] [drm] Radeon Display Connectors
[ 3.146054] [drm] Connector 0:
[ 3.146059] [drm] DVI-D-1
[ 3.146063] [drm] HPD3
[ 3.146069] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 3.146076] [drm] Encoders:
[ 3.146080] [drm] DFP2: INTERNAL_UNIPHY2
[ 3.146084] [drm] Connector 1:
[ 3.146088] [drm] HDMI-A-1
[ 3.146093] [drm] HPD1
[ 3.146097] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 3.146104] [drm] Encoders:
[ 3.146108] [drm] DFP1: INTERNAL_UNIPHY
[ 3.146113] [drm] Connector 2:
[ 3.146117] [drm] VGA-1
[ 3.146120] [drm] HPD2
[ 3.146125] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 3.146132] [drm] Encoders:
[ 3.146136] [drm] CRT1: INTERNAL_UNIPHY3
[ 3.146140] [drm] CRT1: NUTMEG
[ 3.217049] scsi 5:0:0:0: Direct-Access Canon MP220 series 1050 PQ: 0 ANSI: 2
[ 3.217505] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 3.223853] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[ 3.328153] [drm] fb mappable at 0xC0728000
[ 3.328163] [drm] vram apper at 0xC0000000
[ 3.328168] [drm] size 5324800
[ 3.328172] [drm] fb depth is 24
[ 3.328177] [drm] pitch is 5888
[ 3.328539] fbcon: radeondrmfb (fb0) is primary device
[ 3.451771] Console: switching to colour frame buffer device 180x56
[ 3.455566] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 3.462263] usb 1-2: USB disconnect, device number 3
[ 3.479618] ACPI Error: [\_SB_.ALIB] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 3.479683] ACPI Error: Method parse/execution failed [\_SB.PCI0.VGA.ATC0] (Node ffff88013a8c1028), AE_NOT_FOUND (20150930/psparse-542)
[ 3.479756] ACPI Error: Method parse/execution failed [\_SB.PCI0.VGA.ATCS] (Node ffff88013a8c1000), AE_NOT_FOUND (20150930/psparse-542)
[ 3.483485] kfd kfd: Allocated 3944480 bytes on gart for device(1002:1313)
[ 3.483606] kfd kfd: added device (1002:1313)
[ 3.483633] [drm] Initialized radeon 2.43.0 20080528 for 0000:00:01.0 on minor 0
[ 3.696473] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.742957] usb 1-2: new high-speed USB device number 4 using ehci-pci
[ 3.877170] usb 1-2: New USB device found, idVendor=04a9, idProduct=1722
[ 3.877214] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.877250] usb 1-2: Product: MP220 series
[ 3.877273] usb 1-2: Manufacturer: Canon
[ 3.877293] usb 1-2: SerialNumber: 602496
[ 3.878116] usb-storage 1-2:1.2: USB Mass Storage device detected
[ 3.878284] scsi host6: usb-storage 1-2:1.2
[ 4.025070] random: nonblocking pool is initialized
[ 4.547553] usb 1-2: USB disconnect, device number 4
[ 4.818904] usb 1-2: new high-speed USB device number 5 using ehci-pci
[ 4.953063] usb 1-2: New USB device found, idVendor=04a9, idProduct=1722
[ 4.954274] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.955466] usb 1-2: Product: MP220 series
[ 4.956628] usb 1-2: Manufacturer: Canon
[ 4.957787] usb 1-2: SerialNumber: 602496
[ 4.960551] usb-storage 1-2:1.2: USB Mass Storage device detected
[ 4.962081] scsi host7: usb-storage 1-2:1.2
[ 5.000788] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 5.003642] systemd[1]: Detected architecture x86-64.
[ 5.056440] systemd[1]: Set hostname to <pc-hascoet>.
[ 5.159016] usb 1-2: USB disconnect, device number 5
[ 5.430974] usb 1-2: new high-speed USB device number 6 using ehci-pci
[ 5.966940] usb 1-2: device not accepting address 6, error -71
[ 6.282902] usb 1-2: new high-speed USB device number 7 using ehci-pci
[ 6.818869] usb 1-2: device not accepting address 7, error -71
[ 6.820288] usb usb1-port2: attempt power cycle
[ 7.317377] systemd[1]: [/etc/systemd/system/snap-vlc-1397.mount:10] Unknown lvalue 'LazyUnmount' in section 'Mount'
[ 7.321900] systemd[1]: [/etc/systemd/system/snap-core-8689.mount:10] Unknown lvalue 'LazyUnmount' in section 'Mount'
[ 7.341910] systemd[1]: [/etc/systemd/system/snap-core-8592.mount:10] Unknown lvalue 'LazyUnmount' in section 'Mount'
[ 7.442843] usb 1-2: new high-speed USB device number 8 using ehci-pci
[ 7.454276] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.457377] systemd[1]: Listening on Journal Socket.
[ 7.460336] systemd[1]: Created slice System Slice.
[ 7.474978] systemd[1]: Mounting Debug File System...
[ 7.477938] systemd[1]: Listening on udev Kernel Socket.
[ 7.480945] systemd[1]: Listening on Journal Audit Socket.
[ 7.483860] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[ 7.487544] systemd[1]: Started Braille Device Support.
[ 7.490831] systemd[1]: Listening on udev Control Socket.
[ 7.493633] systemd[1]: Reached target Encrypted Volumes.
[ 7.496421] systemd[1]: Reached target User and Group Name Lookups.
[ 7.499220] systemd[1]: Reached target Remote File Systems (Pre).
[ 7.502010] systemd[1]: Reached target Remote File Systems.
[ 7.504978] systemd[1]: Created slice User and Session Slice.
[ 7.523075] systemd[1]: Starting Set console keymap...
[ 7.526226] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 7.529956] systemd[1]: Started Read required files in advance.
[ 7.533914] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.537287] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.541317] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 7.545515] systemd[1]: Mounting Huge Pages File System...
[ 7.548689] systemd[1]: Reached target Slices.
[ 7.552515] systemd[1]: Starting Uncomplicated firewall...
[ 7.866834] usb 1-2: device not accepting address 8, error -71
[ 8.155039] systemd[1]: Starting Load Kernel Modules...
[ 8.158181] systemd[1]: Listening on Syslog Socket.
[ 8.161265] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 8.164401] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 8.168290] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 8.171674] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.175590] systemd[1]: Starting Journal Service...
[ 8.181033] systemd[1]: Mounted POSIX Message Queue File System.
[ 8.182684] usb 1-2: new high-speed USB device number 9 using ehci-pci
[ 8.185699] systemd[1]: Mounted Huge Pages File System.
[ 8.188763] systemd[1]: Mounted Debug File System.
[ 8.192316] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 8.195841] systemd[1]: Started Uncomplicated firewall.
[ 8.251059] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 8.321022] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 8.323991] systemd[1]: Started Remount Root and Kernel File Systems.
[ 8.347091] systemd[1]: Starting udev Coldplug all Devices...
[ 8.351109] systemd[1]: Starting Load/Save Random Seed...
[ 8.539856] systemd[1]: Started Load/Save Random Seed.
[ 8.606725] usb 1-2: device not accepting address 9, error -71
[ 8.608317] usb usb1-port2: unable to enumerate USB device
[ 8.641801] systemd[1]: Started udev Coldplug all Devices.
[ 8.853747] lp: driver loaded but no devices found
[ 8.859005] ppdev: user-space parallel port driver
[ 8.870791] usb 3-2: new full-speed USB device number 3 using ohci-pci
[ 8.893728] parport_pc 00:05: reported by Plug and Play ACPI
[ 8.895358] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[ 8.978848] systemd[1]: Started Journal Service.
[ 8.994844] lp0: using parport0 (interrupt-driven).
[ 9.257827] usb 3-2: not running at top speed; connect to a high speed hub
[ 9.269821] usb 3-2: New USB device found, idVendor=04a9, idProduct=1722
[ 9.271215] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.272546] usb 3-2: Product: MP220 series
[ 9.273869] usb 3-2: Manufacturer: Canon
[ 9.275192] usb 3-2: SerialNumber: 602496
[ 9.278050] usb-storage 3-2:1.2: USB Mass Storage device detected
[ 9.279605] scsi host8: usb-storage 3-2:1.2
[ 9.426487] systemd-journald[281]: Received request to flush runtime journal from PID 1
[ 10.285816] scsi 8:0:0:0: Direct-Access Canon MP220 series 1050 PQ: 0 ANSI: 2
[ 10.286292] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 10.315856] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 13.701053] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.563623] snd_hda_intel 0000:00:01.1: enabling device (0000 -> 0002)
[ 14.563757] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 14.601188] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
[ 14.601811] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 14.601816] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 14.601819] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 14.601822] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 14.601825] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x1e
[ 14.601827] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 14.601830] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 14.601833] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 14.601836] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 14.601838] snd_hda_codec_realtek hdaudioC1D0: CD=0x1c
[ 14.615468] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 14.615594] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 14.615711] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 14.615802] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 14.738787] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 14.739011] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 14.751273] EDAC MC: Ver: 3.0.0
[ 14.775454] MCE: In-kernel MCE decoding enabled.
[ 14.941379] AMD64 EDAC driver v3.4.0
[ 14.941425] EDAC amd64: DRAM ECC disabled.
[ 14.941434] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 15.207555] AVX version of gcm_enc/dec engaged.
[ 15.207560] AES CTR mode by8 optimization enabled
[ 15.253254] Bluetooth: Core ver 2.21
[ 15.253277] NET: Registered protocol family 31
[ 15.253279] Bluetooth: HCI device and connection manager initialized
[ 15.253284] Bluetooth: HCI socket layer initialized
[ 15.253288] Bluetooth: L2CAP socket layer initialized
[ 15.253294] Bluetooth: SCO socket layer initialized
[ 15.395771] usbcore: registered new interface driver btusb
[ 15.936463] kvm: Nested Virtualization enabled
[ 15.936469] kvm: Nested Paging enabled
[ 17.185341] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[ 17.185378] usbcore: registered new interface driver usblp
[ 23.860781] Adding 3609596k swap on /dev/sda3. Priority:-1 extents:1 across:3609596k FS
[ 24.094434] audit: type=1400 audit(1584528266.392:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=855 comm="apparmor_parser"
[ 24.094449] audit: type=1400 audit(1584528266.392:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=855 comm="apparmor_parser"
[ 24.094457] audit: type=1400 audit(1584528266.392:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=855 comm="apparmor_parser"
[ 24.094464] audit: type=1400 audit(1584528266.392:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=855 comm="apparmor_parser"
[ 24.128055] audit: type=1400 audit(1584528266.428:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=854 comm="apparmor_parser"
[ 24.128068] audit: type=1400 audit(1584528266.428:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=854 comm="apparmor_parser"
[ 24.149378] audit: type=1400 audit(1584528266.444:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=858 comm="apparmor_parser"
[ 24.335464] audit: type=1400 audit(1584528266.632:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=856 comm="apparmor_parser"
[ 24.335478] audit: type=1400 audit(1584528266.632:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=856 comm="apparmor_parser"
[ 24.335485] audit: type=1400 audit(1584528266.632:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=856 comm="apparmor_parser"
[ 26.186272] cgroup: new mount options do not match the existing superblock, will be ignored
[ 36.983751] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 36.983756] Bluetooth: BNEP filters: protocol multicast
[ 36.983763] Bluetooth: BNEP socket layer initialized
[ 39.997581] usblp0: removed
[ 40.014359] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[ 40.774851] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 41.226547] r8169 0000:01:00.0 eth0: link down
[ 41.226549] r8169 0000:01:00.0 eth0: link down
[ 41.226620] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 42.849467] r8169 0000:01:00.0 eth0: link up
[ 42.849482] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 53.042540] Bluetooth: RFCOMM TTY layer initialized
[ 53.042554] Bluetooth: RFCOMM socket layer initialized
[ 53.042564] Bluetooth: RFCOMM ver 1.11
[ 4882.459427] r8169 0000:01:00.0 eth0: link down
[ 4886.032840] r8169 0000:01:00.0 eth0: link up
[ 4893.990054] r8169 0000:01:00.0 eth0: link down
[ 4915.245084] r8169 0000:01:00.0 eth0: link up
[ 7583.630998] usb 8-1: new high-speed USB device number 3 using xhci_hcd
[ 7583.762035] usb 8-1: New USB device found, idVendor=03f0, idProduct=0653
[ 7583.762044] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7583.762049] usb 8-1: Product: DeskJet 3700 series
[ 7583.762053] usb 8-1: Manufacturer: HP
[ 7583.762057] usb 8-1: SerialNumber: CN7193P0TV06GZ
[ 7583.766778] usblp 8-1:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0653
[ 7589.171205] usblp0: removed
[ 7589.189722] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[ 7589.190735] usblp1: removed
[ 7589.196863] usblp 8-1:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0653
[ 7764.465945] usblp0: removed
[ 7764.482231] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[ 7764.484435] usblp1: removed
[ 7796.513932] usblp 8-1:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0653
[ 7861.785233] usblp0: removed
[ 7861.805641] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[ 7861.808019] usblp1: removed
[ 7876.583007] usblp 8-1:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0653
[ 8255.161000] usblp0: removed
[ 8255.177408] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[ 8255.178913] usblp1: removed
[ 8274.951932] usblp 8-1:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0653
[ 8871.822818] usblp0: removed
[ 8871.843500] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[ 8871.845566] usblp1: removed
[ 8902.876853] usblp 8-1:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0653
[ 9151.550061] usblp0: removed
[ 9151.569644] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[ 9151.572657] usblp1: removed
[ 9166.095897] usblp 8-1:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0653
[ 9293.206876] usblp0: removed
[ 9293.230252] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[ 9293.240017] usblp1: removed
[ 9307.508948] usblp 8-1:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0653
[ 9968.126104] usblp0: removed
[ 9968.258865] usb 3-2: reset full-speed USB device number 3 using ohci-pci
[ 9968.662063] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[23266.231866] audit_printk_skb: 93 callbacks suppressed
[23266.231872] audit: type=1400 audit(1584551510.761:43): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/var/lib/snapd/desktop/applications/mimeinfo.cache" pid=8887 comm="evince" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
[23279.429192] usblp0: removed
[23279.447122] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[23279.447373] usblp1: removed
[23288.207206] usblp 8-1:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0653
[23529.876226] audit: type=1400 audit(1584551774.426:44): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/var/lib/snapd/desktop/applications/mimeinfo.cache" pid=9082 comm="evince" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
[23595.286937] usblp0: removed
[23595.301088] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[23595.301305] usblp1: removed
[23619.331082] usblp 8-1:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0653
xx@pc-yy:~$
Pour info, le BIOS est un GIGABYTE-UEFI DualBios F2A88XM-D3H/F5
