Bonjour,
Je colle ci-dessous le Boot-info dont tu as donné le lien (
http://paste.ubuntu.com/p/9PFrVMQCsq/ ) dans ton post :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector
117227520 of the same hard drive for core.img. core.img is at this
location and looks for (,gpt2)/boot/grub. It also embeds following
components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_gpt biosdisk
---------------------------------------------------------------------------
=> ISOhybrid (Syslinux 4.05 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu Focal Fossa (development branch)
Boot files: /etc/fstab
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu Focal Fossa (development branch)
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda3: __________________________________________________________________________
File system: BIOS Boot partition
Boot sector type: Grub2's core.img
Boot sector info:
sdb1: __________________________________________________________________________
File system: iso9660
Boot sector type: Unknown
Boot sector info:
Mounting failed: mount: /mnt/BootInfo/sdb1: /dev/sdb1 already mounted or mount point busy.
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 55.9 GiB, 60022480896 bytes, 117231408 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 117,231,407 117,231,407 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 2,050,047 2,048,000 Data partition (Linux)
/dev/sda2 2,050,048 117,226,271 115,176,224 Data partition (Linux)
/dev/sda3 117,227,520 117,229,567 2,048 BIOS Boot partition
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 58.6 GiB, 62914560000 bytes, 122880000 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 0 1,449,983 1,449,984 17 Hidden NTFS / HPFS
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 a4b19743-0ad6-4622-bc45-0e73c321f3c0 ext4
/dev/sda2 3b3d640b-4d48-4f0f-9a88-6481406d8e38 ext4
/dev/sda3
/dev/sdb1 2017-10-29-00-56-18-00 iso9660 Boot-Repair-Disk 64bit
/dev/zram0 b0aac1c6-f4ae-4d05-82ef-8c4f23386298 swap
/dev/zram1 ddf4f962-3a57-4483-872d-55e3bf93f0cc swap
/dev/zram2 190a0deb-6a4c-4fab-b748-791c70a5af48 swap
/dev/zram3 22448c4c-2f82-4245-8cf6-b9ad653c9161 swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Mar 29 23:23 ata-KINGSTON_SV300S37A60G_50026B774900C871 -> ../../sda
lrwxrwxrwx 1 root root 10 Mar 29 23:23 ata-KINGSTON_SV300S37A60G_50026B774900C871-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Mar 29 23:23 ata-KINGSTON_SV300S37A60G_50026B774900C871-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Mar 29 23:23 ata-KINGSTON_SV300S37A60G_50026B774900C871-part3 -> ../../sda3
lrwxrwxrwx 1 root root 9 Mar 29 23:23 ata-TSSTcorp_CDDVDW_TS-L633J_R8H06GNB722394 -> ../../sr0
lrwxrwxrwx 1 root root 9 Mar 29 23:23 usb-SMI_USB_DISK-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Mar 29 23:23 usb-SMI_USB_DISK-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Mar 29 23:23 wwn-0x50026b774900c871 -> ../../sda
lrwxrwxrwx 1 root root 10 Mar 29 23:23 wwn-0x50026b774900c871-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Mar 29 23:23 wwn-0x50026b774900c871-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Mar 29 23:23 wwn-0x50026b774900c871-part3 -> ../../sda3
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb /cdrom iso9660 (ro,noatime,nojoliet,check=s,map=n,blocksize=2048)
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# UNCONFIGURED FSTAB FOR BASE SYSTEM
--------------------------------------------------------------------------------
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${initrdfail}" = 2 ]; then
set initrdfail=
elif [ "${initrdfail}" = 1 ]; then
set next_entry="${prev_entry}"
set prev_entry=
save_env prev_entry
if [ "${next_entry}" ]; then
set initrdfail=2
fi
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function initrdfail {
if [ -n "${have_grubenv}" ]; then if [ -n "${partuuid}" ]; then
if [ -z "${initrdfail}" ]; then
set initrdfail=1
if [ -n "${boot_once}" ]; then
set prev_entry="${default}"
save_env prev_entry
fi
fi
save_env initrdfail
fi; fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 3b3d640b-4d48-4f0f-9a88-6481406d8e38
else
search --no-floppy --fs-uuid --set=root 3b3d640b-4d48-4f0f-9a88-6481406d8e38
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=10
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 10 ; then
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-3b3d640b-4d48-4f0f-9a88-6481406d8e38' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 3b3d640b-4d48-4f0f-9a88-6481406d8e38
else
search --no-floppy --fs-uuid --set=root 3b3d640b-4d48-4f0f-9a88-6481406d8e38
fi
linux /boot/vmlinuz-5.4.0-18-generic root=UUID=3b3d640b-4d48-4f0f-9a88-6481406d8e38 ro quiet splash $vt_handoff
initrd /boot/initrd.img-5.4.0-18-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-3b3d640b-4d48-4f0f-9a88-6481406d8e38' {
menuentry 'Ubuntu, with Linux 5.4.0-18-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-18-generic-advanced-3b3d640b-4d48-4f0f-9a88-6481406d8e38' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 3b3d640b-4d48-4f0f-9a88-6481406d8e38
else
search --no-floppy --fs-uuid --set=root 3b3d640b-4d48-4f0f-9a88-6481406d8e38
fi
echo 'Loading Linux 5.4.0-18-generic ...'
linux /boot/vmlinuz-5.4.0-18-generic root=UUID=3b3d640b-4d48-4f0f-9a88-6481406d8e38 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-5.4.0-18-generic
}
menuentry 'Ubuntu, with Linux 5.4.0-18-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-18-generic-recovery-3b3d640b-4d48-4f0f-9a88-6481406d8e38' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 3b3d640b-4d48-4f0f-9a88-6481406d8e38
else
search --no-floppy --fs-uuid --set=root 3b3d640b-4d48-4f0f-9a88-6481406d8e38
fi
echo 'Loading Linux 5.4.0-18-generic ...'
linux /boot/vmlinuz-5.4.0-18-generic root=UUID=3b3d640b-4d48-4f0f-9a88-6481406d8e38 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-5.4.0-18-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_linux_zfs ###
### END /etc/grub.d/10_linux_zfs ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 3b3d640b-4d48-4f0f-9a88-6481406d8e38
else
search --no-floppy --fs-uuid --set=root 3b3d640b-4d48-4f0f-9a88-6481406d8e38
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 3b3d640b-4d48-4f0f-9a88-6481406d8e38
else
search --no-floppy --fs-uuid --set=root 3b3d640b-4d48-4f0f-9a88-6481406d8e38
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a device; this may
# be used with UUID= as a more robust way to name devices that works even if
# disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
UUID=3b3d640b-4d48-4f0f-9a88-6481406d8e38 / ext4 defaults,discard 0 1
tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
29.110179901 = 31.256817664 boot/grub/grub.cfg 1
29.116844177 = 31.263973376 boot/grub/i386-pc/core.img 1
2.258785248 = 2.425352192 boot/vmlinuz 2
2.258785248 = 2.425352192 boot/vmlinuz-5.4.0-18-generic 2
2.258785248 = 2.425352192 boot/vmlinuz.old 2
2.337566376 = 2.509942784 boot/initrd.img 2
2.337566376 = 2.509942784 boot/initrd.img-5.4.0-18-generic 2
2.337566376 = 2.509942784 boot/initrd.img.old 2
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sdb1
00000000 33 ed 90 90 90 90 90 90 90 90 90 90 90 90 90 90 |3...............|
00000010 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 |................|
00000020 33 ed fa 8e d5 bc 00 7c fb fc 66 31 db 66 31 c9 |3......|..f1.f1.|
00000030 66 53 66 51 06 57 8e dd 8e c5 52 be 00 7c bf 00 |fSfQ.W....R..|..|
00000040 06 b9 00 01 f3 a5 ea 4b 06 00 00 52 b4 41 bb aa |.......K...R.A..|
00000050 55 31 c9 30 f6 f9 cd 13 72 16 81 fb 55 aa 75 10 |U1.0....r...U.u.|
00000060 83 e1 01 74 0b 66 c7 06 f1 06 b4 42 eb 15 eb 00 |...t.f.....B....|
00000070 5a 51 b4 08 cd 13 83 e1 3f 5b 51 0f b6 c6 40 50 |ZQ......?[Q...@P|
00000080 f7 e1 53 52 50 bb 00 7c b9 04 00 66 a1 b0 07 e8 |..SRP..|...f....|
00000090 44 00 0f 82 80 00 66 40 80 c7 02 e2 f2 66 81 3e |D.....f@.....f.>|
000000a0 40 7c fb c0 78 70 75 09 fa bc ec 7b ea 44 7c 00 |@|..xpu....{.D|.|
000000b0 00 e8 83 00 69 73 6f 6c 69 6e 75 78 2e 62 69 6e |....isolinux.bin|
000000c0 20 6d 69 73 73 69 6e 67 20 6f 72 20 63 6f 72 72 | missing or corr|
000000d0 75 70 74 2e 0d 0a 66 60 66 31 d2 66 03 06 f8 7b |upt...f`f1.f...{|
000000e0 66 13 16 fc 7b 66 52 66 50 06 53 6a 01 6a 10 89 |f...{fRfP.Sj.j..|
000000f0 e6 66 f7 36 e8 7b c0 e4 06 88 e1 88 c5 92 f6 36 |.f.6.{.........6|
00000100 ee 7b 88 c6 08 e1 41 b8 01 02 8a 16 f2 7b cd 13 |.{....A......{..|
00000110 8d 64 10 66 61 c3 e8 1e 00 4f 70 65 72 61 74 69 |.d.fa....Operati|
00000120 6e 67 20 73 79 73 74 65 6d 20 6c 6f 61 64 20 65 |ng system load e|
00000130 72 72 6f 72 2e 0d 0a 5e ac b4 0e 8a 3e 62 04 b3 |rror...^....>b..|
00000140 07 cd 10 3c 0a 75 f1 cd 18 f4 eb fd 00 00 00 00 |...<.u..........|
00000150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001b0 68 03 00 00 00 00 00 00 67 45 8b 6b 00 00 80 00 |h.......gE.k....|
000001c0 01 00 17 3f a0 c3 00 00 00 00 00 20 16 00 00 00 |...?....... ....|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
ADDITIONAL INFORMATION :
=================== log of boot-repair 20200329_2323 ===================
boot-repair version : 4ppa62
boot-sav version : 4ppa62
boot-sav-extra version : 4ppa62
glade2script version : 3.2.3~ppa4
Error: Invalid partition table - recursive partition on /dev/sdb.
boot-repair is executed in live-session (Boot-Repair-Disk 64bit 1oct2017, zesty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
file=/cdrom/preseed/lubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- debian-installer/language=fr keyboard-configuration/layoutcode?=fr keyboard-configuration/variantcode?=oss
ls: cannot access '/home/usr/.config': No such file or directory
=================== os-prober:
/dev/sda1:Ubuntu Focal Fossa (development branch) (20.04):Ubuntu:linux
/dev/sda2:Ubuntu Focal Fossa (development branch) (20.04):Ubuntu1:linux
=================== blkid:
/dev/sda1: UUID="a4b19743-0ad6-4622-bc45-0e73c321f3c0" TYPE="ext4" PARTUUID="abea914a-c182-2d41-871a-a1bb988ec50a"
/dev/sda2: UUID="3b3d640b-4d48-4f0f-9a88-6481406d8e38" TYPE="ext4" PARTUUID="8b0230ba-ccfa-8346-95f0-ad8fc91c386d"
/dev/loop0: TYPE="squashfs"
/dev/sdb1: UUID="2017-10-29-00-56-18-00" LABEL="Boot-Repair-Disk 64bit" TYPE="iso9660" PTUUID="6b8b4567" PTTYPE="dos" PARTUUID="6b8b4567-01"
/dev/zram0: UUID="b0aac1c6-f4ae-4d05-82ef-8c4f23386298" TYPE="swap"
/dev/zram1: UUID="ddf4f962-3a57-4483-872d-55e3bf93f0cc" TYPE="swap"
/dev/zram2: UUID="190a0deb-6a4c-4fab-b748-791c70a5af48" TYPE="swap"
/dev/zram3: UUID="22448c4c-2f82-4245-8cf6-b9ad653c9161" TYPE="swap"
/dev/sda3: PARTLABEL="Bios-Boot" PARTUUID="ba115bc3-096c-435e-8a72-5ef32ffbe769"
1 disks with OS, 2 OS : 2 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Linux not detected by os-prober on sda3. Veuillez indiquer ce message à boot.repair@gmail.com
=================== sda1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 mars 28 16:50 grub.d
total 128
-rwxr-xr-x 1 root root 10627 mars 11 16:46 00_header
-rwxr-xr-x 1 root root 6258 mars 11 16:46 05_debian_theme
-rwxr-xr-x 1 root root 17123 mars 11 16:46 10_linux
-rwxr-xr-x 1 root root 38596 mars 11 16:46 10_linux_zfs
-rwxr-xr-x 1 root root 12894 mars 11 16:46 20_linux_xen
-rwxr-xr-x 1 root root 1992 févr. 13 23:09 20_memtest86+
-rwxr-xr-x 1 root root 12059 mars 11 16:46 30_os-prober
-rwxr-xr-x 1 root root 1424 mars 11 16:46 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mars 11 16:46 40_custom
-rwxr-xr-x 1 root root 216 mars 11 16:46 41_custom
-rw-r--r-- 1 root root 483 mars 11 16:46 README
=================== sda1/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sda2/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 mars 28 16:50 grub.d
total 128
-rwxr-xr-x 1 root root 10627 mars 11 16:46 00_header
-rwxr-xr-x 1 root root 6258 mars 11 16:46 05_debian_theme
-rwxr-xr-x 1 root root 17123 mars 11 16:46 10_linux
-rwxr-xr-x 1 root root 38596 mars 11 16:46 10_linux_zfs
-rwxr-xr-x 1 root root 12894 mars 11 16:46 20_linux_xen
-rwxr-xr-x 1 root root 1992 févr. 13 23:09 20_memtest86+
-rwxr-xr-x 1 root root 12059 mars 11 16:46 30_os-prober
-rwxr-xr-x 1 root root 1424 mars 11 16:46 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mars 11 16:46 40_custom
-rwxr-xr-x 1 root root 216 mars 11 16:46 41_custom
-rw-r--r-- 1 root root 483 mars 11 16:46 README
=================== sda2/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 204 oct. 17 2017 grub.d
total 58
-rwxr-xr-x 1 root root 9783 oct. 12 2017 00_header
-rwxr-xr-x 1 root root 6258 avril 24 2017 05_debian_theme
-rwxr-xr-x 1 root root 12676 oct. 12 2017 10_linux
-rwxr-xr-x 1 root root 11281 oct. 12 2017 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 oct. 12 2017 30_os-prober
-rwxr-xr-x 1 root root 1418 oct. 12 2017 30_uefi-firmware
-rwxr-xr-x 1 root root 214 oct. 12 2017 40_custom
-rwxr-xr-x 1 root root 216 oct. 12 2017 41_custom
-rw-r--r-- 1 root root 483 oct. 12 2017 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== No kernel in /boot:
abi-4.13.0-16-generic
config-4.13.0-16-generic
grub
initrd.img-4.13.0-16-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.13.0-16-generic
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
EFI in dmesg.
[ 0.000000] ACPI: UEFI 0x00000000BB7E2000 00003E (v01 PTL PTLBUFxffxff 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI 0x00000000BB7E1000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI 0x00000000BB7E0000 0000DA (v01 PTL PTLSWI 00000001 PTL 00000001)
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, nogrubinstall, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sda2.
sda3 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, no-kernel, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, is-biosboot, .
sda : GPT, BIOS_boot, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:60.0GB:scsi:512:512:gpt:ATA KINGSTON SV300S3:;
1:1049kB:1050MB:1049MB:ext4::;
2:1050MB:60.0GB:59.0GB:ext4::;
3:60.0GB:60.0GB:1049kB::Bios-Boot:bios_grub;
BYT;
/dev/sdb:62.9GB:scsi:512:512:unknown:SMI USB DISK:;
BYT;
/dev/zram3:491MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:491MB:491MB:linux-swap(v1)::;
BYT;
/dev/zram1:491MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:491MB:491MB:linux-swap(v1)::;
BYT;
/dev/zram2:491MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:491MB:491MB:linux-swap(v1)::;
BYT;
/dev/zram0:491MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:491MB:491MB:linux-swap(v1)::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop0 loop squashfs 629,3M
sda disk 55,9G
sda1 part ext4 1000M
sda2 part ext4 54,9G
sda3 part 1M
sdb disk iso9660 58,6G Boot-Repair-Disk 64bit
sdb1 part iso9660 708M Boot-Repair-Disk 64bit
sr0 rom 1024M
zram0 disk 468,1M
zram1 disk 468,1M
zram2 disk 468,1M
zram3 disk 468,1M
KNAME ROTA RO RM STATE MOUNTPOINT
loop0 1 1 0 /rofs
sda 0 0 0 running
sda1 0 0 0 /mnt/boot-sav/sda1
sda2 0 0 0 /mnt/boot-sav/sda2
sda3 0 0 0
sdb 1 0 1 running /cdrom
sdb1 1 0 1
sr0 1 0 1 running
zram0 0 0 0 [SWAP]
zram1 0 0 0 [SWAP]
zram2 0 0 0 [SWAP]
zram3 0 0 0 [SWAP]
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1890192k,nr_inodes=472548,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=383476k,mode=755)
/dev/sdb on /cdrom type iso9660 (ro,noatime,nojoliet,check=s,map=n,blocksize=2048)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=25,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=12973)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=383472k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw,relatime,data=ordered)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw,relatime,data=ordered)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd full fuse gpiochip0 hidraw0 hidraw1 hidraw2 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout toshiba_acpi uhid uinput urandom usb userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper: control
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 375M 6.0M 369M 2% /run
/dev/sdb iso9660 708M 708M 0 100% /cdrom
/dev/loop0 squashfs 630M 630M 0 100% /rofs
/cow overlay 1.9G 7.8M 1.9G 1% /
tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
tmpfs tmpfs 1.9G 4.0K 1.9G 1% /tmp
tmpfs tmpfs 375M 4.0K 375M 1% /run/user/999
/dev/sda1 ext4 969M 939M 0 100% /mnt/boot-sav/sda1
/dev/sda2 ext4 54G 4.7G 47G 10% /mnt/boot-sav/sda2
=================== fdisk -l:
Disk /dev/loop0: 629.3 MiB, 659873792 bytes, 1288816 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 55.9 GiB, 60022480896 bytes, 117231408 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 529EAE00-1D55-2142-BEC7-723809B84320
Device Start End Sectors Size Type
/dev/sda1 2048 2050047 2048000 1000M Linux filesystem
/dev/sda2 2050048 117226271 115176224 54.9G Linux filesystem
/dev/sda3 117227520 117229567 2048 1M BIOS boot
Disk /dev/sdb: 58.6 GiB, 62914560000 bytes, 122880000 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x6b8b4567
Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 0 1449983 1449984 708M 17 Hidden HPFS/NTFS
Disk /dev/zram0: 468.1 MiB, 490848256 bytes, 119836 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram1: 468.1 MiB, 490848256 bytes, 119836 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram2: 468.1 MiB, 490848256 bytes, 119836 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram3: 468.1 MiB, 490848256 bytes, 119836 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda2 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== User settings
The settings chosen by the user will not act on the boot.
Pas mal de choses anormales :
1) type de partition GPT pour le SSD alors que le type de partition MSDOS est celui qui conviendrait le mieux à mon avis
2) installation d'une version en développement (Focal Fossa qui est la future version 20.04) alors que l'ordi est une vieille bécane sortie en 2011 (voir fiche technique
ici). C'est la version 18.04 qui convient.
EDIT : je te conseille de faire une installation automatique
"Effacer le disque et installer Ubuntu" de la version 18.04. L'installateur fera automatiquement une création d'une nouvelle table de partition MSDOS (à la place de la GPT) et il créera automatiquement une seule partition - la partition racine - qui occupera toute la place sur le SSD.
