J'obtiens des erreurs mais j'avoue ne savoir quoi faire? ce sont les dernière lignes en sdb.
arno@arno-HP:~$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0xca, date = 2019-09-26
[ 0.000000] Linux version 5.3.0-51-generic (buildd@lgw01-amd64-018) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #44~18.04.2-Ubuntu SMP Thu Apr 23 14:27:18 UTC 2020 (Ubuntu 5.3.0-51.44~18.04.2-generic 5.3.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-51-generic root=UUID=3ee45c53-d78b-43b4-813d-951d7343a25e ro quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000722befff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000722bf000-0x00000000722bffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000722c0000-0x00000000722c0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000722c1000-0x0000000089d9dfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000089d9e000-0x000000008a78dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008a78e000-0x000000008ae7dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008ae7e000-0x000000008aefdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008aefe000-0x000000008aefefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008aeff000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001eeffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x71e52018-0x71e62057] usable ==> usable
[ 0.000000] e820: update [mem 0x71e52018-0x71e62057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000071e52017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000071e52018-0x0000000071e62057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000071e62058-0x00000000722befff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000722bf000-0x00000000722bffff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000722c0000-0x00000000722c0fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000722c1000-0x0000000089d9dfff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000089d9e000-0x000000008a78dfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008a78e000-0x000000008ae7dfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000008ae7e000-0x000000008aefdfff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000008aefe000-0x000000008aefefff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008aeff000-0x000000008fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000001eeffffff] usable
[ 0.000000] efi: EFI v2.50 by INSYDE Corp.
[ 0.000000] efi: ACPI 2.0=0x8aefd014 SMBIOS=0x89fd9000 SMBIOS 3.0=0x89fd7000 ESRT=0x89fd4158 PROP=0x722bb858 TPMEventLog=0x73b99018
[ 0.000000] secureboot: Secure boot disabled
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: HP HP Pavilion Laptop 14-bk0xx/8362, BIOS F.09 06/02/2017
[ 0.000000] tsc: Detected 2400.000 MHz processor
[ 0.000594] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000596] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000602] last_pfn = 0x1ef000 max_arch_pfn = 0x400000000
[ 0.000606] MTRR default type: write-back
[ 0.000607] MTRR fixed ranges enabled:
[ 0.000608] 00000-9FFFF write-back
[ 0.000608] A0000-BFFFF uncachable
[ 0.000609] C0000-FFFFF write-protect
[ 0.000610] MTRR variable ranges enabled:
[ 0.000612] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000612] 1 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000613] 2 base 0090000000 mask 7FF0000000 uncachable
[ 0.000614] 3 base 008C000000 mask 7FFC000000 uncachable
[ 0.000615] 4 base 008B800000 mask 7FFF800000 uncachable
[ 0.000615] 5 disabled
[ 0.000616] 6 disabled
[ 0.000616] 7 disabled
[ 0.000617] 8 disabled
[ 0.000617] 9 disabled
[ 0.001161] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001390] last_pfn = 0x8aeff max_arch_pfn = 0x400000000
[ 0.010193] esrt: Reserving ESRT space from 0x0000000089fd4158 to 0x0000000089fd4190.
[ 0.010200] check: Scanning 1 areas for low memory corruption
[ 0.010205] Using GB pages for direct mapping
[ 0.010207] BRK [0x106a01000, 0x106a01fff] PGTABLE
[ 0.010208] BRK [0x106a02000, 0x106a02fff] PGTABLE
[ 0.010209] BRK [0x106a03000, 0x106a03fff] PGTABLE
[ 0.010245] BRK [0x106a04000, 0x106a04fff] PGTABLE
[ 0.010246] BRK [0x106a05000, 0x106a05fff] PGTABLE
[ 0.010378] BRK [0x106a06000, 0x106a06fff] PGTABLE
[ 0.010404] BRK [0x106a07000, 0x106a07fff] PGTABLE
[ 0.010454] BRK [0x106a08000, 0x106a08fff] PGTABLE
[ 0.010505] BRK [0x106a09000, 0x106a09fff] PGTABLE
[ 0.010570] BRK [0x106a0a000, 0x106a0afff] PGTABLE
[ 0.010661] RAMDISK: [mem 0x3d871000-0x3fffdfff]
[ 0.010671] ACPI: Early table checksum verification disabled
[ 0.010673] ACPI: RSDP 0x000000008AEFD014 000024 (v02 HPQOEM)
[ 0.010677] ACPI: XSDT 0x000000008AEBB188 00011C (v01 HPQOEM SLIC-MPC 00000000 HP 01000013)
[ 0.010682] ACPI: FACP 0x000000008AEE3000 00010C (v05 HPQOEM SLIC-MPC 00000000 HP 00040000)
[ 0.010687] ACPI: DSDT 0x000000008AEBF000 020C1C (v02 HPQOEM 8362 00000000 ACPI 00040000)
[ 0.010690] ACPI: FACS 0x000000008AE56000 000040
[ 0.010692] ACPI: UEFI 0x000000008AEFC000 000236 (v01 HPQOEM 8362 00000001 HP 00040000)
[ 0.010695] ACPI: UEFI 0x000000008AEFB000 000042 (v01 HPQOEM 8362 00000002 HP 00040000)
[ 0.010697] ACPI: SSDT 0x000000008AEF4000 006885 (v01 HPQOEM 8362 00001000 ACPI 00040000)
[ 0.010700] ACPI: MSDM 0x000000008AEF3000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.010703] ACPI: SSDT 0x000000008AEF2000 0004C3 (v02 HPQOEM 8362 00001000 ACPI 00040000)
[ 0.010705] ACPI: SSDT 0x000000008AEF1000 000046 (v02 HPQOEM 8362 00003000 ACPI 00040000)
[ 0.010708] ACPI: TPM2 0x000000008AEF0000 000034 (v03 HPQOEM 8362 00000000 HP 00040000)
[ 0.010710] ACPI: SSDT 0x000000008AEEC000 00315B (v02 HPQOEM 8362 00003000 ACPI 00040000)
[ 0.010713] ACPI: SSDT 0x000000008AEE8000 003B20 (v02 HPQOEM 8362 00001000 ACPI 00040000)
[ 0.010716] ACPI: ASF! 0x000000008AEE7000 0000A5 (v32 HPQOEM 8362 00000001 HP 00040000)
[ 0.010718] ACPI: ASPT 0x000000008AEE6000 000034 (v07 HPQOEM 8362 00000001 HP 00040000)
[ 0.010721] ACPI: BOOT 0x000000008AEE5000 000028 (v01 HPQOEM 8362 00000001 HP 00040000)
[ 0.010723] ACPI: DBGP 0x000000008AEE4000 000034 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.010726] ACPI: HPET 0x000000008AEE2000 000038 (v01 HPQOEM 8362 00000001 HP 00040000)
[ 0.010728] ACPI: APIC 0x000000008AEE1000 0000BC (v03 HPQOEM 8362 00000001 HP 00040000)
[ 0.010731] ACPI: MCFG 0x000000008AEE0000 00003C (v01 HPQOEM 8362 00000001 HP 00040000)
[ 0.010733] ACPI: SSDT 0x000000008AEBE000 0001BC (v02 HPQOEM 8362 00001000 ACPI 00040000)
[ 0.010736] ACPI: LPIT 0x000000008AEBD000 000094 (v01 HPQOEM 8362 00000000 HP 00040000)
[ 0.010738] ACPI: WSMT 0x000000008AEBC000 000028 (v01 HPQOEM 8362 00000000 HP 00040000)
[ 0.010741] ACPI: SSDT 0x000000008AEBA000 00029F (v02 HPQOEM 8362 00000000 ACPI 00040000)
[ 0.010743] ACPI: SSDT 0x000000008AEB9000 000346 (v01 HPQOEM 8362 00000000 ACPI 00040000)
[ 0.010746] ACPI: SSDT 0x000000008AEB5000 003002 (v02 HPQOEM 8362 00001000 ACPI 00040000)
[ 0.010748] ACPI: SSDT 0x000000008AEB4000 00051E (v02 HPQOEM 8362 00001000 ACPI 00040000)
[ 0.010751] ACPI: DBGP 0x000000008AEB3000 000034 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000)
[ 0.010753] ACPI: DBG2 0x000000008AEB2000 000054 (v00 HPQOEM 8362 00000002 HP 00040000)
[ 0.010755] ACPI: SSDT 0x000000008AEB0000 0010B0 (v02 HPQOEM 8362 00001000 ACPI 00040000)
[ 0.010758] ACPI: SSDT 0x000000008AEAF000 000EDE (v02 HPQOEM 8362 00003000 ACPI 00040000)
[ 0.010760] ACPI: DMAR 0x000000008AEAE000 0000A8 (v01 HPQOEM 8362 00000001 HP 00040000)
[ 0.010763] ACPI: FPDT 0x000000008AEAD000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000)
[ 0.010765] ACPI: BGRT 0x000000008AEAC000 000038 (v01 HPQOEM 8362 00000001 HP 00040000)
[ 0.010773] ACPI: Local APIC address 0xfee00000
[ 0.010945] No NUMA configuration found
[ 0.010946] Faking a node at [mem 0x0000000000000000-0x00000001eeffffff]
[ 0.010956] NODE_DATA(0) allocated [mem 0x1eefd5000-0x1eeffffff]
[ 0.011155] Zone ranges:
[ 0.011156] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.011157] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.011158] Normal [mem 0x0000000100000000-0x00000001eeffffff]
[ 0.011158] Device empty
[ 0.011159] Movable zone start for each node
[ 0.011162] Early memory node ranges
[ 0.011163] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.011164] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.011165] node 0: [mem 0x0000000000100000-0x00000000722befff]
[ 0.011166] node 0: [mem 0x00000000722c1000-0x0000000089d9dfff]
[ 0.011166] node 0: [mem 0x000000008aefe000-0x000000008aefefff]
[ 0.011167] node 0: [mem 0x0000000100000000-0x00000001eeffffff]
[ 0.011396] Zeroed struct page in unavailable ranges: 29383 pages
[ 0.011397] Initmem setup node 0 [mem 0x0000000000001000-0x00000001eeffffff]
[ 0.011399] On node 0 totalpages: 1543481
[ 0.011399] DMA zone: 64 pages used for memmap
[ 0.011400] DMA zone: 21 pages reserved
[ 0.011401] DMA zone: 3996 pages, LIFO batch:0
[ 0.011452] DMA32 zone: 8759 pages used for memmap
[ 0.011453] DMA32 zone: 560541 pages, LIFO batch:63
[ 0.021693] Normal zone: 15296 pages used for memmap
[ 0.021693] Normal zone: 978944 pages, LIFO batch:63
[ 0.033901] Reserving Intel graphics memory at [mem 0x8c000000-0x8fffffff]
[ 0.034048] ACPI: PM-Timer IO Port: 0x1808
[ 0.034050] ACPI: Local APIC address 0xfee00000
[ 0.034056] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.034057] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.034057] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.034058] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.034058] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.034059] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.034060] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.034060] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.034107] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.034109] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.034110] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.034111] ACPI: IRQ0 used by override.
[ 0.034112] ACPI: IRQ9 used by override.
[ 0.034114] Using ACPI (MADT) for SMP configuration information
[ 0.034116] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.034122] e820: update [mem 0x7a5a8000-0x7a5bbfff] usable ==> reserved
[ 0.034132] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.034150] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.034152] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.034153] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.034154] PM: Registered nosave memory: [mem 0x71e52000-0x71e52fff]
[ 0.034156] PM: Registered nosave memory: [mem 0x71e62000-0x71e62fff]
[ 0.034157] PM: Registered nosave memory: [mem 0x722bf000-0x722bffff]
[ 0.034158] PM: Registered nosave memory: [mem 0x722c0000-0x722c0fff]
[ 0.034159] PM: Registered nosave memory: [mem 0x7a5a8000-0x7a5bbfff]
[ 0.034161] PM: Registered nosave memory: [mem 0x89d9e000-0x8a78dfff]
[ 0.034161] PM: Registered nosave memory: [mem 0x8a78e000-0x8ae7dfff]
[ 0.034162] PM: Registered nosave memory: [mem 0x8ae7e000-0x8aefdfff]
[ 0.034163] PM: Registered nosave memory: [mem 0x8aeff000-0x8fffffff]
[ 0.034164] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[ 0.034164] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.034165] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
[ 0.034165] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[ 0.034166] PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
[ 0.034166] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.034167] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.034167] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.034168] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[ 0.034168] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.034169] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[ 0.034169] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[ 0.034170] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[ 0.034170] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.034171] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.034171] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.034173] [mem 0x90000000-0xdfffffff] available for PCI devices
[ 0.034174] Booting paravirtualized kernel on bare hardware
[ 0.034177] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.034183] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.034354] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[ 0.034360] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[ 0.034360] pcpu-alloc: [0] 0 1 2 3
[ 0.034387] Built 1 zonelists, mobility grouping on. Total pages: 1519341
[ 0.034387] Policy zone: Normal
[ 0.034389] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-51-generic root=UUID=3ee45c53-d78b-43b4-813d-951d7343a25e ro quiet splash vt.handoff=1
[ 0.034920] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.035156] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.035205] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.038810] Calgary: detecting Calgary via BIOS EBDA area
[ 0.038812] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.054076] Memory: 5863580K/6173924K available (14339K kernel code, 2369K rwdata, 4668K rodata, 2664K init, 5072K bss, 310344K reserved, 0K cma-reserved)
[ 0.054204] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.054215] Kernel/User page tables isolation: enabled
[ 0.054229] ftrace: allocating 43304 entries in 170 pages
[ 0.071696] rcu: Hierarchical RCU implementation.
[ 0.071698] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.071698] Tasks RCU enabled.
[ 0.071699] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.071700] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.075100] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.075439] random: crng done (trusting CPU's manufacturer)
[ 0.075461] vt handoff: transparent VT on vt#1
[ 0.075471] Console: colour dummy device 80x25
[ 0.075475] printk: console [tty0] enabled
[ 0.075492] ACPI: Core revision 20190703
[ 0.075853] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.075932] APIC: Switch to symmetric I/O mode setup
[ 0.075934] DMAR: Host address width 39
[ 0.075935] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.075941] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.075942] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.075947] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.075948] DMAR: RMRR base: 0x0000008a6b9000 end: 0x0000008a6d8fff
[ 0.075948] DMAR: RMRR base: 0x0000008b800000 end: 0x0000008fffffff
[ 0.075950] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.075951] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.075952] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.075952] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.077580] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.077580] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.081661] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.099903] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns
[ 0.099908] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=9600000)
[ 0.099910] pid_max: default: 32768 minimum: 301
[ 0.102989] LSM: Security Framework initializing
[ 0.103000] Yama: becoming mindful.
[ 0.103029] AppArmor: AppArmor initialized
[ 0.103074] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.103086] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.103260] *** VALIDATE proc ***
[ 0.103309] *** VALIDATE cgroup1 ***
[ 0.103310] *** VALIDATE cgroup2 ***
[ 0.103368] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.103385] process: using mwait in idle threads
[ 0.103388] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.103388] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.103392] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.103393] Spectre V2 : Mitigation: Full generic retpoline
[ 0.103394] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.103394] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.103396] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.103396] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.103397] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.103401] MDS: Mitigation: Clear CPU buffers
[ 0.103667] Freeing SMP alternatives memory: 40K
[ 0.107066] TSC deadline timer enabled
[ 0.107070] smpboot: CPU0: Intel(R) Core(TM) i3-7100U CPU @ 2.40GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[ 0.107189] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.107196] ... version: 4
[ 0.107196] ... bit width: 48
[ 0.107197] ... generic registers: 4
[ 0.107197] ... value mask: 0000ffffffffffff
[ 0.107198] ... max period: 00007fffffffffff
[ 0.107198] ... fixed-purpose events: 3
[ 0.107199] ... event mask: 000000070000000f
[ 0.107239] rcu: Hierarchical SRCU implementation.
[ 0.107905] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.107905] smp: Bringing up secondary CPUs ...
[ 0.107905] x86: Booting SMP configuration:
[ 0.107905] .... node #0, CPUs: #1 #2
[ 0.108388] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.108388] #3
[ 0.108412] smp: Brought up 1 node, 4 CPUs
[ 0.108412] smpboot: Max logical packages: 1
[ 0.108412] smpboot: Total of 4 processors activated (19200.00 BogoMIPS)
[ 0.109650] devtmpfs: initialized
[ 0.109650] x86/mm: Memory block size: 128MB
[ 0.109650] PM: Registering ACPI NVS region [mem 0x722bf000-0x722bffff] (4096 bytes)
[ 0.109650] PM: Registering ACPI NVS region [mem 0x8a78e000-0x8ae7dfff] (7274496 bytes)
[ 0.109650] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.109650] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.109650] pinctrl core: initialized pinctrl subsystem
[ 0.111911] PM: RTC time: 07:35:39, date: 2020-05-03
[ 0.112029] NET: Registered protocol family 16
[ 0.112123] audit: initializing netlink subsys (disabled)
[ 0.112129] audit: type=2000 audit(1588491339.036:1): state=initialized audit_enabled=0 res=1
[ 0.112129] EISA bus registered
[ 0.112129] cpuidle: using governor ladder
[ 0.112129] cpuidle: using governor menu
[ 0.112129] Simple Boot Flag at 0x44 set to 0x80
[ 0.112129] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.112129] ACPI: bus type PCI registered
[ 0.112129] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.112129] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.112129] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.112129] PCI: Using configuration type 1 for base access
[ 0.112333] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.113212] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.113212] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.115992] ACPI: Added _OSI(Module Device)
[ 0.115993] ACPI: Added _OSI(Processor Device)
[ 0.115993] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.115994] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.115995] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.115996] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.115997] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.158732] ACPI: 13 ACPI AML tables successfully acquired and loaded
[ 0.162587] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.166644] ACPI: Dynamic OEM Table Load:
[ 0.166659] ACPI: SSDT 0xFFFF8AD866C3F800 000630 (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
[ 0.168464] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.169612] ACPI: Dynamic OEM Table Load:
[ 0.169620] ACPI: SSDT 0xFFFF8AD8672A2C00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
[ 0.171323] ACPI: Dynamic OEM Table Load:
[ 0.171330] ACPI: SSDT 0xFFFF8AD866FD0000 000115 (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
[ 0.172867] ACPI: Dynamic OEM Table Load:
[ 0.172874] ACPI: SSDT 0xFFFF8AD866FD0400 0001A4 (v02 PmRef HwpLvt 00003000 INTL 20160527)
[ 0.174844] ACPI: Dynamic OEM Table Load:
[ 0.174853] ACPI: SSDT 0xFFFF8AD866C3C000 00065C (v02 PmRef ApIst 00003000 INTL 20160527)
[ 0.176730] ACPI: Dynamic OEM Table Load:
[ 0.176730] ACPI: SSDT 0xFFFF8AD866EE1E00 000197 (v02 PmRef ApHwp 00003000 INTL 20160527)
[ 0.177786] ACPI: Dynamic OEM Table Load:
[ 0.177793] ACPI: SSDT 0xFFFF8AD866EE1800 00018A (v02 PmRef ApCst 00003000 INTL 20160527)
[ 0.181420] ACPI: EC: EC started
[ 0.181420] ACPI: EC: interrupt blocked
[ 0.321390] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.321391] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.321392] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 0.321393] ACPI: Interpreter enabled
[ 0.321443] ACPI: (supports S0 S3 S4 S5)
[ 0.321444] ACPI: Using IOAPIC for interrupt routing
[ 0.321490] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.322162] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.331533] ACPI: Power Resource [WRST] (on)
[ 0.332054] ACPI: Power Resource [WRST] (on)
[ 0.332574] ACPI: Power Resource [WRST] (on)
[ 0.333094] ACPI: Power Resource [WRST] (on)
[ 0.333448] ACPI: Power Resource [WRST] (on)
[ 0.333798] ACPI: Power Resource [WRST] (on)
[ 0.334315] ACPI: Power Resource [WRST] (on)
[ 0.334833] ACPI: Power Resource [WRST] (on)
[ 0.335347] ACPI: Power Resource [WRST] (on)
[ 0.335867] ACPI: Power Resource [WRST] (on)
[ 0.336385] ACPI: Power Resource [WRST] (on)
[ 0.336875] ACPI: Power Resource [WRST] (on)
[ 0.337358] ACPI: Power Resource [WRST] (on)
[ 0.337841] ACPI: Power Resource [WRST] (on)
[ 0.338325] ACPI: Power Resource [WRST] (on)
[ 0.338812] ACPI: Power Resource [WRST] (on)
[ 0.339293] ACPI: Power Resource [WRST] (on)
[ 0.339779] ACPI: Power Resource [WRST] (on)
[ 0.340265] ACPI: Power Resource [WRST] (on)
[ 0.349448] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.349454] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.352698] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.352699] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.355063] PCI host bridge to bus 0000:00
[ 0.355065] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.355067] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.355068] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.355069] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.355069] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.355070] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.355071] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.355072] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.355073] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.355074] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.355075] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.355076] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[ 0.355077] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.355078] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.355088] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[ 0.356054] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
[ 0.356066] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb0ffffff 64bit]
[ 0.356073] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.356078] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
[ 0.356094] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.357058] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.357073] pci 0000:00:04.0: reg 0x10: [mem 0xb1220000-0xb1227fff 64bit]
[ 0.358125] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.358149] pci 0000:00:14.0: reg 0x10: [mem 0xb1200000-0xb120ffff 64bit]
[ 0.358223] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.359269] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.359293] pci 0000:00:14.2: reg 0x10: [mem 0xb1232000-0xb1232fff 64bit]
[ 0.360303] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.360332] pci 0000:00:16.0: reg 0x10: [mem 0xb1233000-0xb1233fff 64bit]
[ 0.360413] pci 0000:00:16.0: PME# supported from D3hot
[ 0.361396] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.361417] pci 0000:00:17.0: reg 0x10: [mem 0xb1230000-0xb1231fff]
[ 0.361425] pci 0000:00:17.0: reg 0x14: [mem 0xb1236000-0xb12360ff]
[ 0.361433] pci 0000:00:17.0: reg 0x18: [io 0x5080-0x5087]
[ 0.361441] pci 0000:00:17.0: reg 0x1c: [io 0x5088-0x508b]
[ 0.361449] pci 0000:00:17.0: reg 0x20: [io 0x5060-0x507f]
[ 0.361457] pci 0000:00:17.0: reg 0x24: [mem 0xb1234000-0xb12347ff]
[ 0.361503] pci 0000:00:17.0: PME# supported from D3hot
[ 0.362486] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.363467] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.364496] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[ 0.364586] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.365601] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[ 0.365690] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.366719] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[ 0.367802] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.367819] pci 0000:00:1f.2: reg 0x10: [mem 0xb122c000-0xb122ffff]
[ 0.368835] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[ 0.368866] pci 0000:00:1f.3: reg 0x10: [mem 0xb1228000-0xb122bfff 64bit]
[ 0.368901] pci 0000:00:1f.3: reg 0x20: [mem 0xb1210000-0xb121ffff 64bit]
[ 0.368956] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.369966] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.370027] pci 0000:00:1f.4: reg 0x10: [mem 0xb1235000-0xb12350ff 64bit]
[ 0.370098] pci 0000:00:1f.4: reg 0x20: [io 0x5040-0x505f]
[ 0.371180] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.371250] pci 0000:02:00.0: [10ec:d723] type 00 class 0x028000
[ 0.371289] pci 0000:02:00.0: reg 0x10: [io 0x4000-0x40ff]
[ 0.371323] pci 0000:02:00.0: reg 0x18: [mem 0xb1100000-0xb110ffff 64bit]
[ 0.371474] pci 0000:02:00.0: supports D1 D2
[ 0.371475] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.371695] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.371698] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
[ 0.371700] pci 0000:00:1c.4: bridge window [mem 0xb1100000-0xb11fffff]
[ 0.371764] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.371796] pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.371824] pci 0000:03:00.0: reg 0x18: [mem 0xb1004000-0xb1004fff 64bit]
[ 0.371842] pci 0000:03:00.0: reg 0x20: [mem 0xb1000000-0xb1003fff 64bit]
[ 0.371955] pci 0000:03:00.0: supports D1 D2
[ 0.371956] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.372155] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.372158] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
[ 0.372160] pci 0000:00:1c.5: bridge window [mem 0xb1000000-0xb10fffff]
[ 0.375663] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.375736] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.375804] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.375870] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.375938] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.376005] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.376071] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.376138] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.376980] ACPI: EC: interrupt unblocked
[ 0.377000] ACPI: EC: event unblocked
[ 0.377014] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.377015] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[ 0.377123] SCSI subsystem initialized
[ 0.377123] libata version 3.00 loaded.
[ 0.377123] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.377123] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.377123] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.377123] vgaarb: loaded
[ 0.377123] ACPI: bus type USB registered
[ 0.377123] usbcore: registered new interface driver usbfs
[ 0.377123] usbcore: registered new interface driver hub
[ 0.377123] usbcore: registered new device driver usb
[ 0.377123] pps_core: LinuxPPS API ver. 1 registered
[ 0.377123] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.377123] PTP clock support registered
[ 0.377123] EDAC MC: Ver: 3.0.0
[ 0.377123] Registered efivars operations
[ 0.377123] PCI: Using ACPI for IRQ routing
[ 0.406014] PCI: pci_cache_line_size set to 64 bytes
[ 0.406070] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.406071] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.406072] e820: reserve RAM buffer [mem 0x71e52018-0x73ffffff]
[ 0.406073] e820: reserve RAM buffer [mem 0x722bf000-0x73ffffff]
[ 0.406073] e820: reserve RAM buffer [mem 0x7a5a8000-0x7bffffff]
[ 0.406074] e820: reserve RAM buffer [mem 0x89d9e000-0x8bffffff]
[ 0.406075] e820: reserve RAM buffer [mem 0x8aeff000-0x8bffffff]
[ 0.406076] e820: reserve RAM buffer [mem 0x1ef000000-0x1efffffff]
[ 0.406169] NetLabel: Initializing
[ 0.406169] NetLabel: domain hash size = 128
[ 0.406170] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.406184] NetLabel: unlabeled traffic allowed by default
[ 0.406197] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.406197] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.409940] clocksource: Switched to clocksource tsc-early
[ 0.419780] VFS: Disk quotas dquot_6.6.0
[ 0.419795] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.419824] *** VALIDATE hugetlbfs ***
[ 0.419922] AppArmor: AppArmor Filesystem Enabled
[ 0.419951] pnp: PnP ACPI init
[ 0.420722] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.420724] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.420725] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.420726] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[ 0.420727] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.420729] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.420730] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.420735] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.421093] system 00:01: [io 0x2000-0x20fe] has been reserved
[ 0.421096] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.421314] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.421316] system 00:02: [io 0xffff] has been reserved
[ 0.421317] system 00:02: [io 0xffff] has been reserved
[ 0.421318] system 00:02: [io 0xffff] has been reserved
[ 0.421319] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 0.421320] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.421323] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.421434] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.421463] pnp 00:04: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 0.421490] pnp 00:05: Plug and Play ACPI device, IDs ETD071d SYN1e00 SYN0002 PNP0f13 (active)
[ 0.423258] system 00:06: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.423260] system 00:06: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.423261] system 00:06: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.423264] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.423923] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.423925] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.423926] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.423927] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.423928] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.423929] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.423931] system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.423932] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.423933] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.423934] system 00:07: [mem 0x90000000-0x9001ffff] has been reserved
[ 0.423938] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.424735] pnp: PnP ACPI: found 8 devices
[ 0.426024] thermal_sys: Registered thermal governor 'fair_share'
[ 0.426025] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.426026] thermal_sys: Registered thermal governor 'step_wise'
[ 0.426026] thermal_sys: Registered thermal governor 'user_space'
[ 0.426027] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.430526] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.430558] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.430560] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.430561] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.430569] pci 0000:00:1c.0: BAR 14: assigned [mem 0x90100000-0x902fffff]
[ 0.430578] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90300000-0x904fffff 64bit pref]
[ 0.430580] pci 0000:00:1c.0: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.430582] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.430586] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 0.430590] pci 0000:00:1c.0: bridge window [mem 0x90100000-0x902fffff]
[ 0.430593] pci 0000:00:1c.0: bridge window [mem 0x90300000-0x904fffff 64bit pref]
[ 0.430597] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.430599] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
[ 0.430602] pci 0000:00:1c.4: bridge window [mem 0xb1100000-0xb11fffff]
[ 0.430608] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.430610] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
[ 0.430613] pci 0000:00:1c.5: bridge window [mem 0xb1000000-0xb10fffff]
[ 0.430620] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.430621] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.430622] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.430623] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.430624] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.430625] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.430626] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.430627] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.430628] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.430628] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.430629] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.430630] pci_bus 0000:00: resource 15 [mem 0x90000000-0xdfffffff window]
[ 0.430631] pci_bus 0000:00: resource 16 [mem 0xfd000000-0xfe7fffff window]
[ 0.430632] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff]
[ 0.430633] pci_bus 0000:01: resource 1 [mem 0x90100000-0x902fffff]
[ 0.430634] pci_bus 0000:01: resource 2 [mem 0x90300000-0x904fffff 64bit pref]
[ 0.430635] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.430636] pci_bus 0000:02: resource 1 [mem 0xb1100000-0xb11fffff]
[ 0.430637] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.430638] pci_bus 0000:03: resource 1 [mem 0xb1000000-0xb10fffff]
[ 0.430820] NET: Registered protocol family 2
[ 0.430952] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.430995] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.431142] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.431215] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.431247] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.431271] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.431367] NET: Registered protocol family 1
[ 0.431372] NET: Registered protocol family 44
[ 0.431384] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.432883] PCI: CLS 64 bytes, default 64
[ 0.432923] Trying to unpack rootfs image as initramfs...
[ 1.043119] Freeing initrd memory: 40500K
[ 1.059973] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.059974] software IO TLB: mapped [mem 0x857c5000-0x897c5000] (64MB)
[ 1.060201] check: Scanning for low memory corruption every 60 seconds
[ 1.061606] Initialise system trusted keyrings
[ 1.061613] Key type blacklist registered
[ 1.061637] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 1.062885] zbud: loaded
[ 1.063244] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.063396] fuse: init (API version 7.31)
[ 1.063493] Platform Keyring initialized
[ 1.067840] Key type asymmetric registered
[ 1.067841] Asymmetric key parser 'x509' registered
[ 1.067850] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 1.067882] io scheduler mq-deadline registered
[ 1.068275] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
[ 1.068303] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.068605] pcieport 0000:00:1c.4: PME: Signaling with IRQ 123
[ 1.068653] pcieport 0000:00:1c.4: AER: enabled with IRQ 123
[ 1.068874] pcieport 0000:00:1c.5: PME: Signaling with IRQ 124
[ 1.068924] pcieport 0000:00:1c.5: AER: enabled with IRQ 124
[ 1.068992] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.069066] efifb: probing for efifb
[ 1.069084] efifb: showing boot graphics
[ 1.069790] efifb: framebuffer at 0xa0000000, using 8100k, total 8100k
[ 1.069791] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 1.069791] efifb: scrolling: redraw
[ 1.069793] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.069831] fbcon: Deferring console take-over
[ 1.069832] fb0: EFI VGA frame buffer device
[ 1.069839] intel_idle: MWAIT substates: 0x11142120
[ 1.069840] intel_idle: v0.4.1 model 0x8E
[ 1.070060] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.071134] ACPI: AC Adapter [ADP1] (off-line)
[ 1.071238] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.071244] ACPI: Lid Switch [LID0]
[ 1.071270] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.071275] ACPI: Power Button [PWRB]
[ 1.071321] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.071337] ACPI: Power Button [PWRF]
[ 1.074040] [Firmware Bug]: Invalid critical threshold (0)
[ 1.078310] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.078311] ACPI: Thermal Zone [TZ01] (40 C)
[ 1.078488] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.082073] Linux agpgart interface v0.103
[ 1.138775] loop: module loaded
[ 1.138989] libphy: Fixed MDIO Bus: probed
[ 1.138990] tun: Universal TUN/TAP device driver, 1.6
[ 1.139017] PPP generic driver version 2.4.2
[ 1.139056] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.139058] ehci-pci: EHCI PCI platform driver
[ 1.139070] ehci-platform: EHCI generic platform driver
[ 1.139081] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.139082] ohci-pci: OHCI PCI platform driver
[ 1.139088] ohci-platform: OHCI generic platform driver
[ 1.139095] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.139317] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.139322] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.140453] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[ 1.143803] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.144087] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 1.144089] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.144090] usb usb1: Product: xHCI Host Controller
[ 1.144091] usb usb1: Manufacturer: Linux 5.3.0-51-generic xhci-hcd
[ 1.144091] usb usb1: SerialNumber: 0000:00:14.0
[ 1.144183] hub 1-0:1.0: USB hub found
[ 1.144209] hub 1-0:1.0: 12 ports detected
[ 1.146294] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 1.147563] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.147566] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.147568] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.147602] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[ 1.147603] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.147604] usb usb2: Product: xHCI Host Controller
[ 1.147605] usb usb2: Manufacturer: Linux 5.3.0-51-generic xhci-hcd
[ 1.147606] usb usb2: SerialNumber: 0000:00:14.0
[ 1.147690] hub 2-0:1.0: USB hub found
[ 1.147700] hub 2-0:1.0: 6 ports detected
[ 1.148674] usb: port power management may be unreliable
[ 1.149132] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.156170] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.156173] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.156269] mousedev: PS/2 mouse device common for all mice
[ 1.156465] rtc_cmos 00:03: RTC can wake from S4
[ 1.176790] rtc_cmos 00:03: registered as rtc0
[ 1.176804] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.176809] i2c /dev entries driver
[ 1.176851] device-mapper: uevent: version 1.0.3
[ 1.176903] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[ 1.176921] platform eisa.0: Probing EISA bus 0
[ 1.176923] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.176924] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.176925] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.176926] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.176927] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.176928] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.176928] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.176929] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.176930] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.176931] platform eisa.0: EISA: Detected 0 cards
[ 1.176934] intel_pstate: Intel P-state driver initializing
[ 1.177414] intel_pstate: HWP enabled
[ 1.177448] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.177451] EFI Variables Facility v0.08 2004-May-17
[ 1.219109] intel_pmc_core INT33A1:00: initialized
[ 1.219351] NET: Registered protocol family 10
[ 1.226048] Segment Routing with IPv6
[ 1.226072] NET: Registered protocol family 17
[ 1.226157] Key type dns_resolver registered
[ 1.226487] RAS: Correctable Errors collector initialized.
[ 1.226523] microcode: sig=0x806e9, pf=0x80, revision=0xca
[ 1.226561] microcode: Microcode Update Driver: v2.2.
[ 1.226570] sched_clock: Marking stable (1226035396, 522699)->(1232927080, -6368985)
[ 1.226696] registered taskstats version 1
[ 1.226711] Loading compiled-in X.509 certificates
[ 1.228330] Loaded X.509 cert 'Build time autogenerated kernel key: 7cd0712136ca74a0c76150d573aa1e9abe4a5a50'
[ 1.228359] zswap: loaded using pool lzo/zbud
[ 1.234513] Key type big_key registered
[ 1.234518] Key type trusted registered
[ 1.237270] Key type encrypted registered
[ 1.237274] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.239116] integrity: Loading X.509 certificate: UEFI:db
[ 1.239154] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 1.239154] integrity: Loading X.509 certificate: UEFI:db
[ 1.239174] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 1.239175] integrity: Loading X.509 certificate: UEFI:db
[ 1.239192] integrity: Loaded X.509 cert 'Hewlett-Packard Company: HP UEFI Secure Boot 2013 DB key: 1d7cf2c2b92673f69c8ee1ec7063967ab9b62bec'
[ 1.240878] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.241127] ima: Allocated hash algorithm: sha1
[ 1.279329] No architecture policies found
[ 1.279339] evm: Initialising EVM extended attributes:
[ 1.279339] evm: security.selinux
[ 1.279340] evm: security.SMACK64
[ 1.279340] evm: security.SMACK64EXEC
[ 1.279341] evm: security.SMACK64TRANSMUTE
[ 1.279341] evm: security.SMACK64MMAP
[ 1.279341] evm: security.apparmor
[ 1.279342] evm: security.ima
[ 1.279342] evm: security.capability
[ 1.279343] evm: HMAC attrs: 0x1
[ 1.280552] PM: Magic number: 4:986:570
[ 1.280594] acpi LNXPOWER:0f: hash matches
[ 1.280754] rtc_cmos 00:03: setting system clock to 2020-05-03T07:35:41 UTC (1588491341)
[ 1.281961] Freeing unused decrypted memory: 2040K
[ 1.282408] Freeing unused kernel image memory: 2664K
[ 1.282471] Write protecting the kernel read-only data: 22528k
[ 1.283115] Freeing unused kernel image memory: 2008K
[ 1.283485] Freeing unused kernel image memory: 1476K
[ 1.293013] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.293015] x86/mm: Checking user space page tables
[ 1.302293] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.302295] Run /init as init process
[ 1.429414] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ 1.429430] wmi_bus wmi_bus-PNP0C14:00: WQBJ data block query control method not found
[ 1.430936] ahci 0000:00:17.0: version 3.0
[ 1.431237] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x3 impl SATA mode
[ 1.431240] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 1.431387] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.440526] scsi host0: ahci
[ 1.442815] libphy: r8169: probed
[ 1.443042] r8169 0000:03:00.0 eth0: RTL8168h/8111h, f4:30:b9:a0:11:46, XID 541, IRQ 127
[ 1.443044] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.444406] scsi host1: ahci
[ 1.445167] scsi host2: ahci
[ 1.445258] ata1: SATA max UDMA/133 abar m2048@0xb1234000 port 0xb1234100 irq 126
[ 1.445260] ata2: SATA max UDMA/133 abar m2048@0xb1234000 port 0xb1234180 irq 126
[ 1.445262] ata3: DUMMY
[ 1.451992] r8169 0000:03:00.0 eno1: renamed from eth0
[ 1.483982] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 1.531464] usb 1-3: New USB device found, idVendor=0bda, idProduct=58eb, bcdDevice= 0.07
[ 1.531466] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.531467] usb 1-3: Product: HP Wide Vision HD Camera
[ 1.531468] usb 1-3: Manufacturer: DGEMU019I77G4U
[ 1.531469] usb 1-3: SerialNumber: 200901010001
[ 1.660063] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[ 1.760603] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.760622] ata1: SATA link down (SStatus 4 SControl 300)
[ 1.763345] ata2.00: ATA-10: SAMSUNG MZNLN256HMHQ-000H1, MAV21H3Q, max UDMA/100
[ 1.763347] ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.765621] ata2.00: configured for UDMA/100
[ 1.775895] ahci 0000:00:17.0: port does not support device sleep
[ 1.776237] scsi 1:0:0:0: Direct-Access ATA SAMSUNG MZNLN256 1H3Q PQ: 0 ANSI: 5
[ 1.776597] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.776697] sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.776698] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 1.776714] sd 1:0:0:0: [sda] Write Protect is off
[ 1.776716] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.776741] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.778262] sda: sda1 sda2
[ 1.778573] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.817234] usb 1-7: New USB device found, idVendor=0bda, idProduct=b009, bcdDevice= 2.00
[ 1.817236] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.817237] usb 1-7: Product: 802.11n WLAN Adapter
[ 1.817238] usb 1-7: Manufacturer: Realtek
[ 1.817239] usb 1-7: SerialNumber: 00e04c000001
[ 1.854034] fbcon: Taking over console
[ 1.854120] Console: switching to colour frame buffer device 240x67
[ 1.859799] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.020789] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x4d5f02)
[ 2.033914] psmouse serio1: elantech: Synaptics capabilities query result 0x10, 0x1a, 0x0d.
[ 2.047536] psmouse serio1: elantech: Elan sample query result 03, 4d, 86
[ 2.054927] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 2.072275] systemd[1]: Detected architecture x86-64.
[ 2.074936] systemd[1]: Set hostname to <arno-HP>.
[ 2.091933] tsc: Refined TSC clocksource calibration: 2399.999 MHz
[ 2.091941] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2298364cab5, max_idle_ns: 440795214892 ns
[ 2.091965] clocksource: Switched to clocksource tsc
[ 2.123070] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[ 2.168333] systemd[1]: Reached target Remote File Systems.
[ 2.168567] systemd[1]: Created slice System Slice.
[ 2.168649] systemd[1]: Listening on udev Control Socket.
[ 2.168750] systemd[1]: Listening on Journal Audit Socket.
[ 2.168804] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.168851] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.168864] systemd[1]: Reached target User and Group Name Lookups.
[ 2.189123] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 2.265365] lp: driver loaded but no devices found
[ 2.272170] ppdev: user-space parallel port driver
[ 2.309608] systemd-journald[314]: Received request to flush runtime journal from PID 1
[ 2.339941] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
[ 2.556412] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 2.556761] hp_accel: laptop model unknown, using default axes configuration
[ 2.559293] input: HP Wireless hotkeys as /devices/virtual/input/input6
[ 2.561373] lis3lv02d: 8 bits 3DC sensor found
[ 2.592404] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[ 2.626170] intel_rapl_common: Found RAPL domain package
[ 2.626173] intel_rapl_common: Found RAPL domain dram
[ 2.627159] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[ 2.762574] input: HP WMI hotkeys as /devices/virtual/input/input8
[ 2.785852] checking generic (a0000000 7e9000) vs hw (a0000000 10000000)
[ 2.785854] fb0: switching to inteldrmfb from EFI VGA
[ 2.787067] Console: switching to colour dummy device 80x25
[ 2.787122] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 2.788438] mc: Linux media interface: v0.10
[ 2.789242] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.789244] [drm] Driver supports precise vblank timestamp query.
[ 2.790356] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.801600] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 2.822246] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
[ 2.828775] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.829369] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 2.834372] fbcon: i915drmfb (fb0) is primary device
[ 2.834420] Console: switching to colour frame buffer device 240x67
[ 2.834473] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 2.840355] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.841481] videodev: Linux video capture interface: v2.00
[ 2.843351] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.843361] Bluetooth: Core ver 2.22
[ 2.843380] NET: Registered protocol family 31
[ 2.843381] Bluetooth: HCI device and connection manager initialized
[ 2.843385] Bluetooth: HCI socket layer initialized
[ 2.843388] Bluetooth: L2CAP socket layer initialized
[ 2.843393] Bluetooth: SCO socket layer initialized
[ 2.843788] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 2.843789] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 2.843790] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 2.843791] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 2.843792] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 2.859769] usbcore: registered new interface driver btusb
[ 2.865706] Bluetooth: hci0: RTL: rtl: examining hci_ver=08 hci_rev=000d lmp_ver=08 lmp_subver=8723
[ 2.866702] Bluetooth: hci0: RTL: rom_version status=0 version=2
[ 2.866704] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723d_fw.bin
[ 2.868156] cryptd: max_cpu_qlen set to 1000
[ 2.868560] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723d_config.bin
[ 2.870175] Bluetooth: hci0: RTL: cfg_sz 10, total sz 33266
[ 2.876815] uvcvideo: Found UVC 1.00 device HP Wide Vision HD Camera (0bda:58eb)
[ 2.884395] uvcvideo 1-3:1.0: Entity type for entity Extension 4 was not initialized!
[ 2.884398] uvcvideo 1-3:1.0: Entity type for entity Processing 2 was not initialized!
[ 2.884400] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized!
[ 2.884502] input: HP Wide Vision HD Camera: HP Wi as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input10
[ 2.884679] usbcore: registered new interface driver uvcvideo
[ 2.884680] USB Video Class driver (1.1.1)
[ 2.902191] AVX2 version of gcm_enc/dec engaged.
[ 2.902193] AES CTR mode by8 optimization enabled
[ 2.922464] rtlwifi: loading out-of-tree module taints kernel.
[ 2.922549] rtlwifi: module verification failed: signature and/or required key missing - tainting kernel
[ 2.978562] rtl8723de: Using firmware rtlwifi/rtl8723defw.bin
[ 2.981219] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 2.981476] rtlwifi: rtlwifi: wireless switch is on
[ 3.016628] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 3.018804] intel_rapl_common: Found RAPL domain package
[ 3.018805] intel_rapl_common: Found RAPL domain core
[ 3.018807] intel_rapl_common: Found RAPL domain uncore
[ 3.018808] intel_rapl_common: Found RAPL domain dram
[ 3.019737] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[ 3.056711] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC295: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 3.056714] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.056716] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 3.056718] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 3.056719] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 3.056722] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 3.056724] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 3.143726] rtl8723de 0000:02:00.0 wlo1: renamed from wlan0
[ 3.242834] kvm: disabled by bios
[ 3.244282] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 3.244357] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 3.244427] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 3.244498] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 3.244708] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 3.244787] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 3.244858] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 3.301756] kvm: disabled by bios
[ 3.338019] kvm: disabled by bios
[ 3.373827] kvm: disabled by bios
[ 3.864896] audit: type=1400 audit(1588491344.079:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=695 comm="apparmor_parser"
[ 3.864901] audit: type=1400 audit(1588491344.079:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=695 comm="apparmor_parser"
[ 3.864903] audit: type=1400 audit(1588491344.079:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=695 comm="apparmor_parser"
[ 3.866789] audit: type=1400 audit(1588491344.079:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=697 comm="apparmor_parser"
[ 3.871533] audit: type=1400 audit(1588491344.083:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=692 comm="apparmor_parser"
[ 3.871538] audit: type=1400 audit(1588491344.083:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=692 comm="apparmor_parser"
[ 3.871540] audit: type=1400 audit(1588491344.083:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=692 comm="apparmor_parser"
[ 3.871543] audit: type=1400 audit(1588491344.083:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=692 comm="apparmor_parser"
[ 3.873807] audit: type=1400 audit(1588491344.087:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=698 comm="apparmor_parser"
[ 3.990330] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.990332] Bluetooth: BNEP filters: protocol multicast
[ 3.990337] Bluetooth: BNEP socket layer initialized
[ 4.386717] Generic Realtek PHY r8169-300:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 4.513295] r8169 0000:03:00.0 eno1: Link is Down
[ 6.250681] Bluetooth: RFCOMM TTY layer initialized
[ 6.250687] Bluetooth: RFCOMM socket layer initialized
[ 6.250692] Bluetooth: RFCOMM ver 1.11
[ 7.921223] rfkill: input handler disabled
[ 8.865811] wlo1: authenticate with 68:a3:78:82:a9:22
[ 10.157979] wlo1: send auth to 68:a3:78:82:a9:22 (try 1/3)
[ 10.160132] wlo1: authenticated
[ 10.168101] wlo1: associate with 68:a3:78:82:a9:22 (try 1/3)
[ 10.171624] wlo1: RX AssocResp from 68:a3:78:82:a9:22 (capab=0x411 status=0 aid=3)
[ 10.277395] wlo1: associated
[ 11.204212] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 191.918531] usb 1-1: new low-speed USB device number 4 using xhci_hcd
[ 192.070618] usb 1-1: New USB device found, idVendor=192f, idProduct=0616, bcdDevice= 2.00
[ 192.070626] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 192.070629] usb 1-1: Product: USB Optical Mouse
[ 192.097528] hidraw: raw HID events driver (C) Jiri Kosina
[ 192.103305] usbcore: registered new interface driver usbhid
[ 192.103307] usbhid: USB HID core driver
[ 192.115677] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:192F:0616.0001/input/input18
[ 192.175103] hid-generic 0003:192F:0616.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-1/input0
[ 1998.439580] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1998.460633] usb 2-2: New USB device found, idVendor=1058, idProduct=25a1, bcdDevice=10.13
[ 1998.460640] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1998.460644] usb 2-2: Product: Elements 25A1
[ 1998.460647] usb 2-2: Manufacturer: Western Digital
[ 1998.460650] usb 2-2: SerialNumber: 575844314536363946355758
[ 1998.510393] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 1998.510588] scsi host3: usb-storage 2-2:1.0
[ 1998.510837] usbcore: registered new interface driver usb-storage
[ 1998.513732] usbcore: registered new interface driver uas
[ 1999.532544] scsi 3:0:0:0: Direct-Access WD Elements 25A1 1013 PQ: 0 ANSI: 6
[ 1999.533343] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1999.534230] sd 3:0:0:0: [sdb] Spinning up disk...
[ 2000.555490] ......
[ 2042.218298] usb 2-2: Disable of device-initiated U1 failed.
[ 2047.338310] usb 2-2: Disable of device-initiated U2 failed.
[ 2047.467029] usb 2-2: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 2047.487550] ready
[ 2047.487733] sd 3:0:0:0: [sdb] 3906963456 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 2047.487955] sd 3:0:0:0: [sdb] Write Protect is off
[ 2047.487959] sd 3:0:0:0: [sdb] Mode Sense: 47 00 10 08
[ 2047.488175] sd 3:0:0:0: [sdb] No Caching mode page found
[ 2047.488183] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 2047.489582] sd 3:0:0:0: [sdb] Spinning up disk...
[ 2048.522007] .......................
[ 2071.053358] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 2071.053372] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 2071.053379] Buffer I/O error on dev sdb, logical block 0, async page read
[ 2071.053452] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 2071.053464] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 2071.053470] Buffer I/O error on dev sdb, logical block 0, async page read
[ 2071.053516] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 2071.053523] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 2071.053527] Buffer I/O error on dev sdb, logical block 0, async page read
[ 2071.053543] ldm_validate_partition_table(): Disk read failed.
[ 2071.053571] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 2071.053577] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 2071.053581] Buffer I/O error on dev sdb, logical block 0, async page read
[ 2071.053619] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 2071.053625] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 2071.053629] Buffer I/O error on dev sdb, logical block 0, async page read
[ 2071.053664] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 2071.053670] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 2071.053674] Buffer I/O error on dev sdb, logical block 0, async page read
[ 2071.053709] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 2071.053715] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 2071.053718] Buffer I/O error on dev sdb, logical block 0, async page read
[ 2071.053732] Dev sdb: unable to read RDB block 0
[ 2071.053757] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 2071.053762] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 2071.053766] Buffer I/O error on dev sdb, logical block 0, async page read
[ 2071.053801] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 2071.053806] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 2071.053826] Buffer I/O error on dev sdb, logical block 0, async page read
[ 2071.053839] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 2071.053841] blk_update_request: I/O error, dev sdb, sector 24 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 2071.053842] Buffer I/O error on dev sdb, logical block 3, async page read
[ 2071.053852] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 2071.053862] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 2071.053866] sdb: unable to read partition table
[ 2071.054878] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2071.061288] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 2071.061305] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 5112.018626] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 5112.018631] print_req_error: 4 callbacks suppressed
[ 5112.018633] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 5112.019978] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 5112.019984] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 5112.019987] buffer_io_error: 3 callbacks suppressed
[ 5112.019988] Buffer I/O error on dev sdb, logical block 0, async page read
[ 5112.020009] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 5112.020011] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 5112.020013] Buffer I/O error on dev sdb, logical block 0, async page read
[ 5112.020029] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 5112.020032] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 5112.020033] Buffer I/O error on dev sdb, logical block 0, async page read
[ 5112.020040] ldm_validate_partition_table(): Disk read failed.
[ 5112.020050] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 5112.020052] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 5112.020054] Buffer I/O error on dev sdb, logical block 0, async page read
[ 5112.020068] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 5112.020070] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 5112.020072] Buffer I/O error on dev sdb, logical block 0, async page read
[ 5112.020088] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 5112.020090] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 5112.020092] Buffer I/O error on dev sdb, logical block 0, async page read
[ 5112.020108] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 5112.020110] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 5112.020112] Buffer I/O error on dev sdb, logical block 0, async page read
[ 5112.020119] Dev sdb: unable to read RDB block 0
[ 5112.020129] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 5112.020131] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 5112.020133] Buffer I/O error on dev sdb, logical block 0, async page read
[ 5112.020148] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 5112.020151] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 5112.020152] Buffer I/O error on dev sdb, logical block 0, async page read
[ 5112.020170] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 5112.020172] Buffer I/O error on dev sdb, logical block 3, async page read
[ 5112.020186] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 5112.020200] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 5112.020205] sdb: unable to read partition table
[ 5112.034947] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 5112.034969] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 5432.940190] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 5432.940195] print_req_error: 5 callbacks suppressed
[ 5432.940197] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 5432.940200] buffer_io_error: 3 callbacks suppressed
[ 5432.940201] Buffer I/O error on dev sdb, logical block 0, async page read
[ 5432.940230] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 5432.940234] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 5432.940236] Buffer I/O error on dev sdb, logical block 0, async page read
[ 5432.940252] sd 3:0:0:0: [sdb] tag#0 device offline or changed
[ 5432.940254] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 5432.940255] Buffer I/O error on dev sdb, logical block 0, async page read
[ 5435.744755] perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[11696.305782] usb 2-2: USB disconnect, device number 2
[11699.669704] usb 2-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[11699.690495] usb 2-2: New USB device found, idVendor=1058, idProduct=25a1, bcdDevice=10.13
[11699.690502] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[11699.690506] usb 2-2: Product: Elements 25A1
[11699.690510] usb 2-2: Manufacturer: Western Digital
[11699.690513] usb 2-2: SerialNumber: 575844314536363946355758
[11699.692202] usb-storage 2-2:1.0: USB Mass Storage device detected
[11699.693186] scsi host3: usb-storage 2-2:1.0
[11700.713994] scsi 3:0:0:0: Direct-Access WD Elements 25A1 1013 PQ: 0 ANSI: 6
[11700.715533] sd 3:0:0:0: Attached scsi generic sg1 type 0
[11700.716663] sd 3:0:0:0: [sdb] Spinning up disk...
