Bonjour,
Collage du rapport, pour les spécialistes :
boot-repair-4ppa119 [20200515_2322]
============================== Boot Info Summary ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for /boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_gpt biosdisk search_fs_uuid
---------------------------------------------------------------------------
config script
---------------------------------------------------------------------------
search.fs_uuid f09400dd-8b62-432f-82c2-2c6d6f1217a0 root hd0,gpt3
set prefix=($root)'/boot/grub'
---------------------------------------------------------------------------
=> libparted MBR boot code is installed in the MBR of /dev/sdc.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/BOOT/bkpbootx64.efi /efi/BOOT/bootx64.efi
/efi/BOOT/fbx64.efi /efi/BOOT/grubx64.efi
/efi/BOOT/mmx64.efi /efi/ubuntu/fwupx64.efi
/efi/ubuntu/grubx64.efi /efi/ubuntu/mmx64.efi
/efi/ubuntu/shimx64.efi /efi/ubuntu/grub.cfg
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 20.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdc1: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /efi/BOOT/grubx64.efi
/efi/BOOT/mmx64.efi
================================ 1 OS detected =================================
OS#1: L'OS actuellement utilisé - Ubuntu 20.04 LTS CurrentSession on sda2
============================ Architecture/Host Info ============================
CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.4.0-29-lowlatency root=UUID=65d939c8-340b-416e-8ff4-aca190a9320a ro recovery nomodeset
===================================== UEFI =====================================
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot enabled.
efibootmgr -v
BootCurrent: 0001
Timeout: 1 seconds
BootOrder: 0001,0005,0000,0002,0003,0004
Boot0000* Windows Boot Manager VenHw(99e275e7-75a0-4b37-a2e6-c5385e6c00cb)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* ubuntu HD(1,GPT,becc1f9d-3b84-44b8-8917-e18dec047b01,0x800,0x100000)/File(\EFI\UBUNTU\SHIMX64.EFI)
Boot0002* UEFI:CD/DVD Drive BBS(129,,0x0)
Boot0003* UEFI:Removable Device BBS(130,,0x0)
Boot0004* UEFI:Network Device BBS(131,,0x0)
Boot0005* debian VenHw(99e275e7-75a0-4b37-a2e6-c5385e6c00cb)
f7a57b08bc7c1c85417ae4cea582d1d4 sda1/BOOT/bkpbootx64.efi
f7a57b08bc7c1c85417ae4cea582d1d4 sda1/BOOT/bootx64.efi
bed45d1c9554cea09924d3814cb7c446 sda1/BOOT/fbx64.efi
98bea152fadd26c4e9136916f6cc32a8 sda1/BOOT/grubx64.efi
4487628005555bfd4a4c0a47211e0700 sda1/BOOT/mmx64.efi
b5698f2f88c3917bdf0c9f0f2a45d469 sda1/ubuntu/fwupx64.efi
98bea152fadd26c4e9136916f6cc32a8 sda1/ubuntu/grubx64.efi
4487628005555bfd4a4c0a47211e0700 sda1/ubuntu/mmx64.efi
f7a57b08bc7c1c85417ae4cea582d1d4 sda1/ubuntu/shimx64.efi
109e2fc4aa9786cd887ed6f95c485951 sdc1/BOOT/grubx64.efi
4487628005555bfd4a4c0a47211e0700 sdc1/BOOT/mmx64.efi
f7a57b08bc7c1c85417ae4cea582d1d4 sdc1/BOOT/BOOTx64.efi
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
sda : is-GPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sdb : notGPT, no-BIOSboot, has-noESP, not-usb, not-mmc, no-os, 2048 sectors * 512 bytes
sdc : notGPT, no-BIOSboot, has-noESP, liveusb, not-mmc, no-os, 2048 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
sda2 : is-os, 64, apt-get, signed grub-pc grub-efi , grub2, grub-install, grubenv-ok, update-grub, farbios
sda1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sdb1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sdc1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
Partitions info (2/3): _________________________________________________________
sda2 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda1 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb1 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdc1 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
sda2 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sda
sda1 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sdb1 : maybesepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdb
sdc1 : not-sepboot, no-kernel, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdc
fdisk -l (filtered): ___________________________________________________________
Disk sda: 119.25 GiB, 128035676160 bytes, 250069680 sectors
Disk identifier: 2CE4A64F-E280-493E-B92F-560BF8E98B44
Start End Sectors Size Type
sda1 2048 1050623 1048576 512M EFI System
sda2 1050624 250068991 249018368 118.8G Linux filesystem
Disk sdb: 931.53 GiB, 1000204886016 bytes, 1953525168 sectors
Disk identifier: 0x2ac227a7
Boot Start End Sectors Size Id Type
sdb1 2048 1953523711 1953521664 931.5G 83 Linux
Disk sdc: 14.96 GiB, 16039018496 bytes, 31326208 sectors
Disk identifier: 0x87475de1
Boot Start End Sectors Size Id Type
sdc1 2048 31324159 31322112 15G c W95 FAT32 (LBA)
parted -lm (filtered): _________________________________________________________
sda:128GB:scsi:512:4096:gpt:ATA HFS128G39TND-N21:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:128GB:127GB:ext4::;
sdb:1000GB:scsi:512:4096:msdos:ATA HGST HTS721010A9:;
1:1049kB:1000GB:1000GB:ext4::;
sdc:16.0GB:scsi:512:512:msdos:Wilk :;
1:1049kB:16.0GB:16.0GB:fat32::lba;
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda
├─sda1 vfat 0FE9-AE76 becc1f9d-3b84-44b8-8917-e18dec047b01 EFI System Partition
└─sda2 ext4 65d939c8-340b-416e-8ff4-aca190a9320a c8f26f4f-4fe6-4b6c-a9e4-403a6a591f6a
sdb
└─sdb1 ext4 3ade60b9-fb9c-453e-92a7-435b9b9fef12 2ac227a7-01
sdc
└─sdc1 vfat F23E-7153 87475de1-01 UBUNTU-STUD
df (filtered): _________________________________________________________________
Avail Use% Mounted on
sda2 83.5G 23% /
sdb1 2G 95% /mnt/boot-sav/sdb1
sdc1 11.6G 22% /mnt/boot-sav/sdc1
Mount options: __________________________________________________________________
sda2 rw,relatime,errors=remount-ro
sdb1 rw,relatime
sdc1 rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
===================== sda1/efi/ubuntu/grub.cfg (filtered) ======================
search.fs_uuid 65d939c8-340b-416e-8ff4-aca190a9320a root hd0,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
====================== sda2/boot/grub/grub.cfg (filtered) ======================
Ubuntu (lowlatency) 65d939c8-340b-416e-8ff4-aca190a9320a
Ubuntu, avec Linux 5.4.0-29-lowlatency 65d939c8-340b-416e-8ff4-aca190a9320a
Ubuntu, avec Linux 5.4.0-26-lowlatency 65d939c8-340b-416e-8ff4-aca190a9320a
### END /etc/grub.d/30_os-prober ###
UEFI Firmware Settings uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###
========================== sda2/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=65d939c8-340b-416e-8ff4-aca190a9320a / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
/swapfile none swap sw 0 0
UUID=0FE9-AE76 /boot/efi vfat defaults 0 1
======================= sda2/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
==================== sda2: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
52.637710571 = 56.519311360 boot/grub/grub.cfg 1
107.355628967 = 115.272228864 boot/vmlinuz 1
5.886878967 = 6.320988160 boot/vmlinuz-5.4.0-26-lowlatency 1
107.355628967 = 115.272228864 boot/vmlinuz-5.4.0-29-lowlatency 1
5.886878967 = 6.320988160 boot/vmlinuz.old 1
107.664211273 = 115.603566592 boot/initrd.img 3
107.507961273 = 115.435794432 boot/initrd.img-5.4.0-26-lowlatency 2
107.664211273 = 115.603566592 boot/initrd.img-5.4.0-29-lowlatency 3
107.507961273 = 115.435794432 boot/initrd.img.old 2
===================== sda2: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 15823 mars 29 08:40 09_lowlatency
-rw-r--r-- 1 root root 17123 avril 15 13:31 10_linux
-rwxr-xr-x 1 root root 42128 avril 15 13:31 10_linux_zfs
-rwxr-xr-x 1 root root 12894 avril 15 13:31 20_linux_xen
-rwxr-xr-x 1 root root 12059 avril 15 13:31 30_os-prober
-rwxr-xr-x 1 root root 1424 avril 15 13:31 30_uefi-firmware
-rwxr-xr-x 1 root root 214 avril 15 13:31 40_custom
-rwxr-xr-x 1 root root 216 avril 15 13:31 41_custom
======================== sda2/etc/grub.d/09_lowlatency =========================
#! /bin/sh
set -e
# grub-mkconfig helper script.
# Copyright (C) 2006,2007,2008,2009,2010 Free Software Foundation, Inc.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB. If not, see <http://www.gnu.org/licenses/>.
#
# Ubuntustudio customization that keeps the latest lowlatency kernel
# as the first menu item and default boot even if there is a newer
# generic or other kernel. Often the updated generic kernel is
# released a few days earlier than the lowlatency kernel
prefix="/usr"
exec_prefix="/usr"
datarootdir="/usr/share"
ubuntu_recovery="1"
quiet_boot="1"
quick_boot="1"
gfxpayload_dynamic="1"
vt_handoff="1"
. "$pkgdatadir/grub-mkconfig_lib"
export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"
# only 09_lowlatency or 10_linux should run, since we got this far
# 10_linux should not run next
if [ -x /etc/grub.d/10_linux ]; then
chmod -x /etc/grub.d/10_linux
fi
CLASS="--class gnu-linux --class gnu --class os"
SUPPORTED_INITS="sysvinit:/lib/sysvinit/init systemd:/lib/systemd/systemd upstart:/sbin/upstart"
if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; then
OS=GNU/Linux
else
case ${GRUB_DISTRIBUTOR} in
Ubuntu|Kubuntu)
OS="${GRUB_DISTRIBUTOR}"
;;
*)
OS="${GRUB_DISTRIBUTOR} GNU/Linux"
;;
esac
CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1|LC_ALL=C sed 's,[^[:alnum:]_],_,g') ${CLASS}"
fi
# loop-AES arranges things so that /dev/loop/X can be our root device, but
# the initrds that Linux uses don't like that.
case ${GRUB_DEVICE} in
/dev/loop/*|/dev/loop[0-9])
GRUB_DEVICE=`losetup ${GRUB_DEVICE} | sed -e "s/^[^(]*(\([^)]\+\)).*/\1/"`
# We can't cope with devices loop-mounted from files here.
case ${GRUB_DEVICE} in
/dev/*) ;;
*) exit 0 ;;
esac
;;
esac
# btrfs may reside on multiple devices. We cannot pass them as value of root= parameter
# and mounting btrfs requires user space scanning, so force UUID in this case.
if [ "x${GRUB_DEVICE_UUID}" = "x" ] || [ "x${GRUB_DISABLE_LINUX_UUID}" = "xtrue" ] \
|| ! test -e "/dev/disk/by-uuid/${GRUB_DEVICE_UUID}" \
|| ( test -e "${GRUB_DEVICE}" && uses_abstraction "${GRUB_DEVICE}" lvm ); then
LINUX_ROOT_DEVICE=${GRUB_DEVICE}
else
LINUX_ROOT_DEVICE=UUID=${GRUB_DEVICE_UUID}
fi
case x"$GRUB_FS" in
xbtrfs)
rootsubvol="`make_system_path_relative_to_its_root /`"
rootsubvol="${rootsubvol#/}"
if [ "x${rootsubvol}" != x ]; then
GRUB_CMDLINE_LINUX="rootflags=subvol=${rootsubvol} ${GRUB_CMDLINE_LINUX}"
fi;;
xzfs)
rpool=`${grub_probe} --device ${GRUB_DEVICE} --target=fs_label 2>/dev/null || true`
bootfs="`make_system_path_relative_to_its_root / | sed -e "s,@$,,"`"
LINUX_ROOT_DEVICE="ZFS=${rpool}${bootfs%/}"
;;
esac
title_correction_code=
if [ -x /lib/recovery-mode/recovery-menu ]; then
GRUB_CMDLINE_LINUX_RECOVERY=recovery
else
GRUB_CMDLINE_LINUX_RECOVERY=single
fi
if [ "$ubuntu_recovery" = 1 ]; then
GRUB_CMDLINE_LINUX_RECOVERY="$GRUB_CMDLINE_LINUX_RECOVERY nomodeset"
fi
if [ "$vt_handoff" = 1 ]; then
for word in $GRUB_CMDLINE_LINUX_DEFAULT; do
if [ "$word" = splash ]; then
GRUB_CMDLINE_LINUX_DEFAULT="$GRUB_CMDLINE_LINUX_DEFAULT \$vt_handoff"
fi
done
fi
if [ x"$GRUB_FORCE_PARTUUID" != x ]; then
echo "set partuuid=${GRUB_FORCE_PARTUUID}"
fi
linux_entry ()
{
os="$1"
version="$2"
type="$3"
args="$4"
if [ -z "$boot_device_id" ]; then
boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
fi
if [ x$type != xsimple ] ; then
case $type in
recovery)
title="$(gettext_printf "%s, with Linux %s (%s)" "${os}" "${version}" "$(gettext "${GRUB_RECOVERY_TITLE}")")" ;;
init-*)
title="$(gettext_printf "%s, with Linux %s (%s)" "${os}" "${version}" "${type#init-}")" ;;
*)
title="$(gettext_printf "%s, with Linux %s" "${os}" "${version}")" ;;
esac
if [ x"$title" = x"$GRUB_ACTUAL_DEFAULT" ] || [ x"Previous Linux versions>$title" = x"$GRUB_ACTUAL_DEFAULT" ]; then
replacement_title="$(echo "Advanced options for ${OS}" | sed 's,>,>>,g')>$(echo "$title" | sed 's,>,>>,g')"
quoted="$(echo "$GRUB_ACTUAL_DEFAULT" | grub_quote)"
title_correction_code="${title_correction_code}if [ \"x\$default\" = '$quoted' ]; then default='$(echo "$replacement_title" | grub_quote)'; fi;"
grub_warn "$(gettext_printf "Please don't use old title \`%s' for GRUB_DEFAULT, use \`%s' (for versions before 2.00) or \`%s' (for 2.00 or later)" "$GRUB_ACTUAL_DEFAULT" "$replacement_title" "gnulinux-advanced-$boot_device_id>gnulinux-$version-$type-$boot_device_id")"
fi
echo "menuentry '$(echo "$title" | grub_quote)' ${CLASS} \$menuentry_id_option 'gnulinux-$version-$type-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
else
echo "menuentry '$(echo "$os" | grub_quote)' ${CLASS} \$menuentry_id_option 'gnulinux-simple-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
fi
if [ "$quick_boot" = 1 ]; then
echo " recordfail" | sed "s/^/$submenu_indentation/"
fi
if [ x$type != xrecovery ] ; then
save_default_entry | grub_add_tab
fi
# Use ELILO's generic "efifb" when it's known to be available.
# FIXME: We need an interface to select vesafb in case efifb can't be used.
if [ "x$GRUB_GFXPAYLOAD_LINUX" = x ]; then
echo " load_video" | sed "s/^/$submenu_indentation/"
else
if [ "x$GRUB_GFXPAYLOAD_LINUX" != xtext ]; then
echo " load_video" | sed "s/^/$submenu_indentation/"
fi
fi
if ([ "$ubuntu_recovery" = 0 ] || [ x$type != xrecovery ]) && \
([ "x$GRUB_GFXPAYLOAD_LINUX" != x ] || [ "$gfxpayload_dynamic" = 1 ]); then
echo " gfxmode \$linux_gfx_mode" | sed "s/^/$submenu_indentation/"
fi
echo " insmod gzio" | sed "s/^/$submenu_indentation/"
echo " if [ x\$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi" | sed "s/^/$submenu_indentation/"
if [ x$dirname = x/ ]; then
if [ -z "${prepare_root_cache}" ]; then
prepare_root_cache="$(prepare_grub_to_access_device ${GRUB_DEVICE} | grub_add_tab)"
fi
printf '%s\n' "${prepare_root_cache}" | sed "s/^/$submenu_indentation/"
else
if [ -z "${prepare_boot_cache}" ]; then
prepare_boot_cache="$(prepare_grub_to_access_device ${GRUB_DEVICE_BOOT} | grub_add_tab)"
fi
printf '%s\n' "${prepare_boot_cache}" | sed "s/^/$submenu_indentation/"
fi
if [ x"$quiet_boot" = x0 ] || [ x"$type" != xsimple ]; then
message="$(gettext_printf "Loading Linux %s ..." ${version})"
sed "s/^/$submenu_indentation/" << EOF
echo '$(echo "$message" | grub_quote)'
EOF
fi
if test -d /sys/firmware/efi && test -e "${linux}.efi.signed"; then
sed "s/^/$submenu_indentation/" << EOF
linux ${rel_dirname}/${basename}.efi.signed root=${linux_root_device_thisversion} ro ${args}
EOF
else
# We have initrd and PARTUUID is set - we try to boot without initrd, and fallback to using it
# if it fails.
# "panic=-1" means "on panic reboot immediately". "panic=0" disables the reboot behavior.
if [ x"$GRUB_FORCE_PARTUUID" != x ]; then
linux_root_device_thisversion="PARTUUID=${GRUB_FORCE_PARTUUID}"
fi
message="$(gettext_printf "Loading initial ramdisk ...")"
if test -n "${initrd}" && [ x"$GRUB_FORCE_PARTUUID" != x ]; then
sed "s/^/$submenu_indentation/" << EOF
if [ "\${initrdfail}" = 1 ]; then
linux ${rel_dirname}/${basename} root=${linux_root_device_thisversion} ro ${args}
EOF
if [ x"$quiet_boot" = x0 ] || [ x"$type" != xsimple ]; then
sed "s/^/$submenu_indentation/" << EOF
echo '$(echo "$message" | grub_quote)'
EOF
fi
sed "s/^/$submenu_indentation/" << EOF
initrd ${rel_dirname}/${initrd}
else
linux ${rel_dirname}/${basename} root=${linux_root_device_thisversion} ro ${args} panic=-1
fi
initrdfail
EOF
else
# We don't have initrd or we don't want to set PARTUUID. Don't try initrd-less boot with fallback.
sed "s/^/$submenu_indentation/" << EOF
linux ${rel_dirname}/${basename} root=${linux_root_device_thisversion} ro ${args}
EOF
if test -n "${initrd}"; then
# We do have initrd - let's use it at boot.
# TRANSLATORS: ramdisk isn't identifier. Should be translated.
if [ x"$quiet_boot" = x0 ] || [ x"$type" != xsimple ]; then
sed "s/^/$submenu_indentation/" << EOF
echo '$(echo "$message" | grub_quote)'
EOF
fi
sed "s/^/$submenu_indentation/" << EOF
initrd ${rel_dirname}/${initrd}
EOF
fi
fi
fi
sed "s/^/$submenu_indentation/" << EOF
}
EOF
}
machine=`uname -m`
case "x$machine" in
xi?86 | xx86_64)
list=
for i in /boot/vmlinuz-*lowlatency /vmlinuz-*lowlatency /boot/kernel-*lowlatency ; do
if grub_file_is_not_garbage "$i" ; then list="$list $i" ; fi
done
list2=
for i in /boot/vmlinuz-*generic /vmlinuz-*generic /boot/kernel-*generic ; do
if grub_file_is_not_garbage "$i" ; then list2="$list2 $i" ; fi
done ;;
*)
list=
for i in /boot/vmlinuz-*lowlatency /boot/vmlinux-*lowlatency /vmlinuz-*lowlatency /vmlinux-*lowlatency /boot/kernel-*lowlatency ; do
if grub_file_is_not_garbage "$i" ; then list="$list $i" ; fi
done
list2=
for i in /boot/vmlinuz-*generic /boot/vmlinux-*generic /vmlinuz-*generic /vmlinux-*generic /boot/kernel-*generic ; do
if grub_file_is_not_garbage "$i" ; then list2="$list2 $i" ; fi
done ;;
esac
case "$machine" in
i?86) GENKERNEL_ARCH="x86" ;;
mips|mips64) GENKERNEL_ARCH="mips" ;;
mipsel|mips64el) GENKERNEL_ARCH="mipsel" ;;
arm*) GENKERNEL_ARCH="arm" ;;
*) GENKERNEL_ARCH="$machine" ;;
esac
prepare_boot_cache=
prepare_root_cache=
boot_device_id=
title_correction_code=
cat << 'EOF'
function gfxmode {
set gfxpayload="${1}"
EOF
if [ "$vt_handoff" = 1 ]; then
cat << 'EOF'
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
EOF
fi
cat << EOF
}
EOF
# Use ELILO's generic "efifb" when it's known to be available.
# FIXME: We need an interface to select vesafb in case efifb can't be used.
if [ "x$GRUB_GFXPAYLOAD_LINUX" != x ] || [ "$gfxpayload_dynamic" = 0 ]; then
echo "set linux_gfx_mode=$GRUB_GFXPAYLOAD_LINUX"
else
cat << EOF
if [ "\${recordfail}" != 1 ]; then
if [ -e \${prefix}/gfxblacklist.txt ]; then
if hwmatch \${prefix}/gfxblacklist.txt 3; then
if [ \${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
EOF
fi
cat << EOF
export linux_gfx_mode
EOF
# Extra indentation to add to menu entries in a submenu. We're not in a submenu
# yet, so it's empty. In a submenu it will be equal to '\t' (one tab).
submenu_indentation=""
is_top_level=true
is_generic_top=true
if [ "x$list" = "x" ]; then
is_top_level=false
generic_is_default=true
fi
if [ "x$list2" = "x" ]; then
is_generic_top=false
fi
while [ "x$list $list2" != "x" ] ; do
if [ "x$is_generic_top" = xtrue ] && [ "x$is_top_level" != xtrue ]; then
linux=`version_find_latest $list2`
case $linux in
*.efi.signed)
# We handle these in linux_entry.
list2=`echo $list2 | tr ' ' '\n' | grep -vx $linux | tr '\n' ' '`
continue
;;
esac
else
linux=`version_find_latest $list`
if [ "x$linux" = "x" ]; then
break
fi
case $linux in
*.efi.signed)
# We handle these in linux_entry.
list=`echo $list | tr ' ' '\n' | grep -vx $linux | tr '\n' ' '`
continue
;;
esac
fi
gettext_printf "Found linux image: %s\n" "$linux" >&2
basename=`basename $linux`
dirname=`dirname $linux`
rel_dirname=`make_system_path_relative_to_its_root $dirname`
version=`echo $basename | sed -e "s,^[^0-9]*-,,g"`
alt_version=`echo $version | sed -e "s,\.old$,,g"`
linux_root_device_thisversion="${LINUX_ROOT_DEVICE}"
initrd=
for i in "initrd.img-${version}" "initrd-${version}.img" "initrd-${version}.gz" \
"initrd-${version}" "initramfs-${version}.img" \
"initrd.img-${alt_version}" "initrd-${alt_version}.img" \
"initrd-${alt_version}" "initramfs-${alt_version}.img" \
"initramfs-genkernel-${version}" \
"initramfs-genkernel-${alt_version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${alt_version}"; do
if test -e "${dirname}/${i}" ; then
initrd="$i"
break
fi
done
config=
for i in "${dirname}/config-${version}" "${dirname}/config-${alt_version}" "/etc/kernels/kernel-config-${version}" ; do
if test -e "${i}" ; then
config="${i}"
break
fi
done
initramfs=
if test -n "${config}" ; then
initramfs=`grep CONFIG_INITRAMFS_SOURCE= "${config}" | cut -f2 -d= | tr -d \"`
fi
if test -n "${initrd}" ; then
gettext_printf "Found initrd image: %s\n" "${dirname}/${initrd}" >&2
elif test -z "${initramfs}" ; then
# "UUID=" and "ZFS=" magic is parsed by initrd or initramfs. Since there's
# no initrd or builtin initramfs, it can't work here.
linux_root_device_thisversion=${GRUB_DEVICE}
fi
if [ "x$is_top_level" = xtrue ] && [ "x${GRUB_DISABLE_SUBMENU}" != xy ]; then
linux_entry "${OS} (lowlatency)" "${version}" simple \
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"
if [ -z "$boot_device_id" ]; then
boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
fi
if [ "x$is_generic_top" != xtrue ]; then
submenu_indentation="$grub_tab"
# TRANSLATORS: %s is replaced with an OS name
echo "submenu '$(gettext_printf "Advanced options for %s" "${OS}" | grub_quote)' \$menuentry_id_option 'gnulinux-advanced-$boot_device_id' {"
fi
is_top_level=false
continue
fi
if [ "x$is_generic_top" = xtrue ] && [ "x${GRUB_DISABLE_SUBMENU}" != xy ]; then
linux_entry "${OS} (generic)" "${version}" simple \
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"
submenu_indentation="$grub_tab"
list="$list $list2"
if [ -z "$boot_device_id" ]; then
boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
fi
# TRANSLATORS: %s is replaced with an OS name
echo "submenu '$(gettext_printf "Advanced options for %s" "${OS}" | grub_quote)' \$menuentry_id_option 'gnulinux-advanced-$boot_device_id' {"
is_generic_top=false
continue
fi
linux_entry "${OS}" "${version}" advanced \
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"
for supported_init in ${SUPPORTED_INITS}; do
init_path="${supported_init#*:}"
if [ -x "${init_path}" ] && [ "$(readlink -f /sbin/init)" != "$(readlink -f "${init_path}")" ]; then
linux_entry "${OS}" "${version}" "init-${supported_init%%:*}" \
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT} init=${init_path}"
fi
done
if [ "x${GRUB_DISABLE_RECOVERY}" != "xtrue" ]; then
linux_entry "${OS}" "${version}" recovery \
"${GRUB_CMDLINE_LINUX_RECOVERY} ${GRUB_CMDLINE_LINUX}"
fi
list=`echo $list | tr ' ' '\n' | fgrep -vx "$linux" | tr '\n' ' '`
done
# If at least one kernel was found, then we need to
# add a closing '}' for the submenu command.
if [ x"$is_top_level" != xtrue ]; then
echo '}'
fi
echo "$title_correction_code"
====================== sdc1/boot/grub/grub.cfg (filtered) ======================
Try Ubuntu Studio without installing
Try Ubuntu Studio without installing (safe graphics)
Install Ubuntu Studio
Install Ubuntu Studio (safe graphics)
OEM install (for manufacturers)
Boot from next volume
UEFI Firmware Settings
==================== sdc1: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of
sda2,
using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file restore-efi-backups
Final advice in case of suggested repair: ______________________________________
Please do not forget to make your UEFI firmware boot on sda1/efi/****/shim****.efi (**** will be updated in the final message) file!
