Bon, c'est toujours pareil
dd: erreur de lecture dans '/dev/sdd': Erreur d'entrée/sortie
par contre je ne sais pas si j'ai beaucoup avancé mais voici les manip avec les utilitaires Seagate
beaucoup d'informations mais beaucoup d'interrogations; je pensais qu'il était possible de dmander l'écriture d'une petite partie (le début) afin de ne pas re obligé de tout réinitialiser, mais à présent j'en suis moins sur...
J'ai essayé de lui dire d'écrire durant 3 minutes, etc mais je me fais jeter (j'ai du mal comprendre la doc, il faut que je reprenne sérieux car là on est au coeur !
Donc encore quelque temps à passer dessus.
Enfin, un chose est certaine: la protection par container LUKS est balèze !
pierre@banyan:~/Public/Technique/Config Locale/Disques/SeaChest/SeaChestLite/Lin64$ sudo ./SeaChest_Lite_101_1183_64 --scan
==========================================================================================
SeaChest_Lite - Seagate drive utilities - NVMe Enabled
Copyright (c) 2014-2018 Seagate Technology LLC and/or its Affiliates, All Rights Reserved
SeaChest_Lite Version: 1.0.1-1_18_3 X86_64
Build Date: Oct 18 2018
Today: Sun May 24 17:18:58 2020
==========================================================================================
Vendor Handle Model Number Serial Number FwRev
ATA /dev/sg0 WDC WD10EZEX-00BN5A0 WD-WCC3F2TFUUYX 01.01A01
ATA /dev/sg1 WDC WD40EZRZ-00GXCB0 WD-WCC7K6VTJYPA 80.00A80
ATA /dev/sg2 ST3000DM001-1CH166 W1F2GMSM CC24
ASUS /dev/sg3 DRW-24F1MT 1.00
ATA /dev/sg4 ST6000DM003-2CY186 WCT1TRX5 0001
pierre@banyan:~/Public/Technique/Config Locale/Disques/SeaChest/SeaChestLite/Lin64$ sudo ./SeaChest_Lite_101_1183_64 -d /dev/sg4 --shortDST --poll
==========================================================================================
SeaChest_Lite - Seagate drive utilities - NVMe Enabled
Copyright (c) 2014-2018 Seagate Technology LLC and/or its Affiliates, All Rights Reserved
SeaChest_Lite Version: 1.0.1-1_18_3 X86_64
Build Date: Oct 18 2018
Today: Sun May 24 17:20:34 2020
==========================================================================================
/dev/sg4 - ST6000DM003-2CY186 - WCT1TRX5 - ATA
Short DST
Test progress: 100% complete
The self-test routine completed without error.
Short DST Passed!
pierre@banyan:~/Public/Technique/Config Locale/Disques/SeaChest/SeaChestLite/Lin64$ sudo ./SeaChest_Lite_101_1183_64 -d /dev/sg4 -i
==========================================================================================
SeaChest_Lite - Seagate drive utilities - NVMe Enabled
Copyright (c) 2014-2018 Seagate Technology LLC and/or its Affiliates, All Rights Reserved
SeaChest_Lite Version: 1.0.1-1_18_3 X86_64
Build Date: Oct 18 2018
Today: Sun May 24 17:27:34 2020
==========================================================================================
/dev/sg4 - ST6000DM003-2CY186 - WCT1TRX5 - ATA
Model Number: ST6000DM003-2CY186
Serial Number: WCT1TRX5
Firmware Revision: 0001
World Wide Name: 5000C500C0DBA13E
Drive Capacity (TB/TiB): 6.00/5.46
Native Drive Capacity (TB/TiB): 6.00/5.46
Temperature Data:
Current Temperature (C): 36
Highest Temperature (C): 43
Lowest Temperature (C): 0
Power On Time: 196 days 15 hours 3 minutes
Power On Hours: 4719.05
MaxLBA: 11721045167
Native MaxLBA: 11721045167
Logical Sector Size (B): 512
Physical Sector Size (B): 4096
Sector Alignment: 0
Rotation Rate (RPM): 5425
Form Factor (inch): 3.5
Last DST information:
Time since last DST (hours): 1.05
DST Status/Result: 0x0
DST Test run: 0x1
Long Drive Self Test Time: 11 hours 34 minutes
Interface speed:
Max Speed (Gb/s): 6.0
Negotiated Speed (Gb/s): 3.0
Annualized Workload Rate (TB/yr): 13.78
Total Bytes Read (GB): 421.42
Total Bytes Written (TB): 7.00
Encryption Support: Not Supported
Cache Size (MiB): 256.00
Read Look-Ahead: Enabled
Write Cache: Enabled
Low Current Spinup: Disabled
SMART Status: Good
ATA Security Information: Supported, Enabled, Locked
Firmware Download Support: Full, Segmented, Deferred, DMA
Specifications Supported:
ACS-3
ACS-2
ATA8-ACS
ATA/ATAPI-7
ATA/ATAPI-6
ATA/ATAPI-5
ATA/ATAPI-4
SATA 3.1
SATA 3.0
SATA 2.6
SATA 2.5
SATA II: Extensions
SATA 1.0a
ATA8-AST
Features Supported:
SATA NCQ
SATA Software Settings Preservation [Enabled]
SATA Device Initiated Power Management
HPA
Power Management
Security [Enabled]
SMART [Enabled]
48bit Address
PUIS
GPL
SMART Self-Test
SMART Error Logging
Write-Read-Verify
EPC [Enabled]
Sense Data Reporting [Enabled]
SCT Write Same
SCT Data Tables
Host Logging
Seagate In Drive Diagnostics (IDD)
pierre@banyan:~/Public/Technique/Config Locale/Disques/SeaChest/SeaChestUtilities/Linux/Lin64$ sudo ./SeaChest_Erase_201_11923_64 -d /dev/sg4 --showEraseSupport -v3
==========================================================================================
SeaChest_Erase - Seagate drive utilities - NVMe Enabled
Copyright (c) 2014-2019 Seagate Technology LLC and/or its Affiliates, All Rights Reserved
SeaChest_Erase Version: 2.0.1-1_19_23 X86_64
Build Date: Jun 10 2019
Today: Sun May 24 17:58:26 2020
==========================================================================================
Sending ATA Identify command
Sending SAT ATA Pass-Through Command:
Protocol: PIO
Data Direction: Data In
Task File Registers:
[Feature] = 00h
[Count] = 01h
[LBA Lo] = 00h
[LBA Mid] = 00h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = ECh
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 08 0E 00 00 00 01 00 00 00 00 00 00 A0 EC 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count] = 00h
[LBA Lo] = 00h
[LBA Mid] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (ms): 2.24
Identify returning: SUCCESS
Sending ATA Read Log Ext DMA command - Log 00h
Sending SAT ATA Pass-Through Command:
Protocol: UDMA
Data Direction: Data In
Task File Registers:
[FeatureExt] = 00h
[Feature] = 00h
[CountExt] = 00h
[Count] = 01h
[LBA Lo Ext] = 00h
[LBA Lo] = 00h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 47h
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 15 0E 00 00 00 01 00 00 00 00 00 00 A0 47 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count Ext] = 00h
[Count] = 00h
[LBA Lo Ext] = 00h
[LBA Lo] = 00h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (us): 323.37
Read Log Ext DMA returning: SUCCESS
Sending ATA Read Log Ext DMA command - Log 30h
Sending SAT ATA Pass-Through Command:
Protocol: UDMA
Data Direction: Data In
Task File Registers:
[FeatureExt] = 00h
[Feature] = 00h
[CountExt] = 00h
[Count] = 01h
[LBA Lo Ext] = 00h
[LBA Lo] = 30h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 47h
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 15 0E 00 00 00 01 00 30 00 00 00 00 A0 47 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count Ext] = 00h
[Count] = 00h
[LBA Lo Ext] = 00h
[LBA Lo] = 00h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (ms): 2.32
Read Log Ext DMA returning: SUCCESS
Sending ATA Read Log Ext DMA command - Log 30h
Sending SAT ATA Pass-Through Command:
Protocol: UDMA
Data Direction: Data In
Task File Registers:
[FeatureExt] = 00h
[Feature] = 00h
[CountExt] = 00h
[Count] = 01h
[LBA Lo Ext] = 00h
[LBA Lo] = 30h
[LBA Mid Ext] = 00h
[LBA Mid] = 01h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 47h
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 15 0E 00 00 00 01 00 30 00 01 00 00 A0 47 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count Ext] = 00h
[Count] = 00h
[LBA Lo Ext] = 00h
[LBA Lo] = 00h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (ms): 2.35
Read Log Ext DMA returning: SUCCESS
Sending ATA Read Log Ext DMA command - Log 30h
Sending SAT ATA Pass-Through Command:
Protocol: UDMA
Data Direction: Data In
Task File Registers:
[FeatureExt] = 00h
[Feature] = 00h
[CountExt] = 00h
[Count] = 01h
[LBA Lo Ext] = 00h
[LBA Lo] = 30h
[LBA Mid Ext] = 00h
[LBA Mid] = 03h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 47h
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 15 0E 00 00 00 01 00 30 00 03 00 00 A0 47 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count Ext] = 00h
[Count] = 00h
[LBA Lo Ext] = 00h
[LBA Lo] = 00h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (ms): 2.37
Read Log Ext DMA returning: SUCCESS
Sending ATA Read Log Ext DMA command - Log 04h
Sending SAT ATA Pass-Through Command:
Protocol: UDMA
Data Direction: Data In
Task File Registers:
[FeatureExt] = 00h
[Feature] = 00h
[CountExt] = 00h
[Count] = 01h
[LBA Lo Ext] = 00h
[LBA Lo] = 04h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 47h
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 15 0E 00 00 00 01 00 04 00 00 00 00 A0 47 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count Ext] = 00h
[Count] = 00h
[LBA Lo Ext] = 00h
[LBA Lo] = 00h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (ms): 1.78
Read Log Ext DMA returning: SUCCESS
Sending ATA Read Log Ext DMA command - Log 04h
Sending SAT ATA Pass-Through Command:
Protocol: UDMA
Data Direction: Data In
Task File Registers:
[FeatureExt] = 00h
[Feature] = 00h
[CountExt] = 00h
[Count] = 01h
[LBA Lo Ext] = 00h
[LBA Lo] = 04h
[LBA Mid Ext] = 00h
[LBA Mid] = 01h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 47h
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 15 0E 00 00 00 01 00 04 00 01 00 00 A0 47 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count Ext] = 00h
[Count] = 00h
[LBA Lo Ext] = 00h
[LBA Lo] = 00h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (ms): 1.81
Read Log Ext DMA returning: SUCCESS
/dev/sg4 - ST6000DM003-2CY186 - WCT1TRX5 - ATA
Requesting SCSI Supported Op Codes
CDB:
0 1 2 3 4 5 6 7 8 9 A B
0x00 A3 0C 01 04 00 00 00 00 00 0A 00 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Information: 0000000000000000h
Command Specific Information: 0000000000000000h
Command Time (us): 39.68
Supported Op Codes returning: SUCCESS
Sending ATA Read Log Ext DMA command - Log 00h
Sending SAT ATA Pass-Through Command:
Protocol: UDMA
Data Direction: Data In
Task File Registers:
[FeatureExt] = 00h
[Feature] = 00h
[CountExt] = 00h
[Count] = 01h
[LBA Lo Ext] = 00h
[LBA Lo] = 00h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 47h
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 15 0E 00 00 00 01 00 00 00 00 00 00 A0 47 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count Ext] = 00h
[Count] = 00h
[LBA Lo Ext] = 00h
[LBA Lo] = 00h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (us): 337.77
Read Log Ext DMA returning: SUCCESS
Sending ATA Read Log Ext DMA command - Log 30h
Sending SAT ATA Pass-Through Command:
Protocol: UDMA
Data Direction: Data In
Task File Registers:
[FeatureExt] = 00h
[Feature] = 00h
[CountExt] = 00h
[Count] = 01h
[LBA Lo Ext] = 00h
[LBA Lo] = 30h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 47h
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 15 0E 00 00 00 01 00 30 00 00 00 00 A0 47 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count Ext] = 00h
[Count] = 00h
[LBA Lo Ext] = 00h
[LBA Lo] = 00h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (ms): 2.41
Read Log Ext DMA returning: SUCCESS
Sending ATA Read Log Ext DMA command - Log 30h
Sending SAT ATA Pass-Through Command:
Protocol: UDMA
Data Direction: Data In
Task File Registers:
[FeatureExt] = 00h
[Feature] = 00h
[CountExt] = 00h
[Count] = 01h
[LBA Lo Ext] = 00h
[LBA Lo] = 30h
[LBA Mid Ext] = 00h
[LBA Mid] = 06h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 47h
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 15 0E 00 00 00 01 00 30 00 06 00 00 A0 47 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count Ext] = 00h
[Count] = 00h
[LBA Lo Ext] = 00h
[LBA Lo] = 00h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (ms): 2.38
Read Log Ext DMA returning: SUCCESS
Sending ATA SMART command - Read Data
Sending SAT ATA Pass-Through Command:
Protocol: PIO
Data Direction: Data In
Task File Registers:
[Feature] = D0h
[Count] = 01h
[LBA Lo] = 00h
[LBA Mid] = 4Fh
[LBA Hi] = C2h
[DeviceHead] = A0h
[Command] = B0h
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 08 0E 00 D0 00 01 00 00 00 4F 00 C2 A0 B0 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count] = 00h
[LBA Lo] = 00h
[LBA Mid] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (ms): 293.95
SMART Read Data returning: SUCCESS
Sending ATA Trusted Receive DMA
Sending SAT ATA Pass-Through Command:
Protocol: UDMA
Data Direction: Data In
Task File Registers:
[Feature] = 01h
[Count] = 01h
[LBA Lo] = 00h
[LBA Mid] = 01h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 5Dh
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 14 0E 00 01 00 01 00 00 00 01 00 00 A0 5D 00
Sense Data Buffer:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 C0
0x10 00 0E 00 00 00 00 00 00 00 00
Sense Key: 5h = Illegal Request
ASC & ASCQ: 24h - 0h = Invalid Field In CDB
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count] = 00h
[LBA Lo] = 00h
[LBA Mid] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (us): 114.82
Sending SAT ATA Pass-Through Command:
Protocol: DMA
Data Direction: Data In
Task File Registers:
[Feature] = 01h
[Count] = 01h
[LBA Lo] = 00h
[LBA Mid] = 01h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 5Dh
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 0C 0E 00 01 00 01 00 00 00 01 00 00 A0 5D 00
Sense Data Buffer:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 C0
0x10 00 0E 00 00 00 00 00 00 00 00
Sense Key: 5h = Illegal Request
ASC & ASCQ: 24h - 0h = Invalid Field In CDB
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count] = 00h
[LBA Lo] = 00h
[LBA Mid] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (us): 40.51
Trusted Receive DMA returning: NOT SUPPORTED
Sending ATA Trusted Receive
Sending SAT ATA Pass-Through Command:
Protocol: PIO
Data Direction: Data In
Task File Registers:
[Feature] = 01h
[Count] = 01h
[LBA Lo] = 00h
[LBA Mid] = 01h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 5Ch
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 08 0E 00 01 00 01 00 00 00 01 00 00 A0 5C 00
Sense Data Buffer:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 C0
0x10 00 0E 00 00 00 00 00 00 00 00
Sense Key: 5h = Illegal Request
ASC & ASCQ: 24h - 0h = Invalid Field In CDB
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count] = 00h
[LBA Lo] = 00h
[LBA Mid] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (us): 79.58
Trusted Receive returning: NOT SUPPORTED
Erase Methods supported by this drive (listed fastest to slowest):
1 Write Same Erase
NOTE: Host may abort erase with disc access.
2 Overwrite Erase
The minimum time to overwrite erase this drive is approximately:
11 hours 34 minutes
The actual time to erase may take longer.
pierre@banyan:~/Public/Technique/Config Locale/Disques/SeaChest/SeaChestUtilities/Linux/Lin64$ sudo ./SeaChest_Lite_120_11923_64 -d /dev/sg4 -i
==========================================================================================
SeaChest_Lite - Seagate drive utilities - NVMe Enabled
Copyright (c) 2014-2019 Seagate Technology LLC and/or its Affiliates, All Rights Reserved
SeaChest_Lite Version: 1.2.0-1_19_23 X86_64
Build Date: Jun 10 2019
Today: Sun May 24 18:11:57 2020
==========================================================================================
/dev/sg4 - ST6000DM003-2CY186 - WCT1TRX5 - ATA
Model Number: ST6000DM003-2CY186
Serial Number: WCT1TRX5
Firmware Revision: 0001
World Wide Name: 5000C500C0DBA13E
Drive Capacity (TB/TiB): 6.00/5.46
Native Drive Capacity (TB/TiB): 6.00/5.46
Temperature Data:
Current Temperature (C): 36
Highest Temperature (C): 43
Lowest Temperature (C): 0
Power On Time: 196 days 15 hours 47 minutes
Power On Hours: 4719.78
MaxLBA: 11721045167
Native MaxLBA: 11721045167
Logical Sector Size (B): 512
Physical Sector Size (B): 4096
Sector Alignment: 0
Rotation Rate (RPM): 5425
Form Factor: 3.5"
Last DST information:
Time since last DST (hours): 1.78
DST Status/Result: 0x0
DST Test run: 0x1
Long Drive Self Test Time: 11 hours 34 minutes
Interface speed:
Max Speed (Gb/s): 6.0
Negotiated Speed (Gb/s): 3.0
Annualized Workload Rate (TB/yr): 13.77
Total Bytes Read (GB): 421.42
Total Bytes Written (TB): 7.00
Encryption Support: Not Supported
Cache Size (MiB): 256.00
Read Look-Ahead: Enabled
Write Cache: Enabled
Low Current Spinup: Disabled
SMART Status: Good
ATA Security Information: Supported, Enabled, Locked
Firmware Download Support: Full, Segmented, Deferred, DMA
Specifications Supported:
ACS-3
ACS-2
ATA8-ACS
ATA/ATAPI-7
ATA/ATAPI-6
ATA/ATAPI-5
ATA/ATAPI-4
SATA 3.1
SATA 3.0
SATA 2.6
SATA 2.5
SATA II: Extensions
SATA 1.0a
ATA8-AST
Features Supported:
SATA NCQ
SATA Software Settings Preservation [Enabled]
SATA Device Initiated Power Management
HPA
Power Management
Security [Enabled]
SMART [Enabled]
48bit Address
PUIS
GPL
SMART Self-Test
SMART Error Logging
Write-Read-Verify
EPC [Enabled]
Sense Data Reporting [Enabled]
SCT Write Same
SCT Data Tables
Host Logging
Seagate In Drive Diagnostics (IDD)
pierre@banyan:~/Public/Technique/Config Locale/Disques/SeaChest/SeaChestUtilities/Linux/Lin64$ sudo ./SeaChest_Erase_201_11923_64 -d /dev/sg4 --showEraseSupport -v3
==========================================================================================
SeaChest_Erase - Seagate drive utilities - NVMe Enabled
Copyright (c) 2014-2019 Seagate Technology LLC and/or its Affiliates, All Rights Reserved
SeaChest_Erase Version: 2.0.1-1_19_23 X86_64
Build Date: Jun 10 2019
Today: Sun May 24 17:58:26 2020
==========================================================================================
Sending ATA Identify command
Sending SAT ATA Pass-Through Command:
Protocol: PIO
Data Direction: Data In
Task File Registers:
[Feature] = 00h
[Count] = 01h
[LBA Lo] = 00h
[LBA Mid] = 00h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = ECh
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 08 0E 00 00 00 01 00 00 00 00 00 00 A0 EC 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count] = 00h
[LBA Lo] = 00h
[LBA Mid] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (ms): 2.24
Identify returning: SUCCESS
Sending ATA Read Log Ext DMA command - Log 00h
Sending SAT ATA Pass-Through Command:
Protocol: UDMA
Data Direction: Data In
Task File Registers:
[FeatureExt] = 00h
[Feature] = 00h
[CountExt] = 00h
[Count] = 01h
[LBA Lo Ext] = 00h
[LBA Lo] = 00h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 47h
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 15 0E 00 00 00 01 00 00 00 00 00 00 A0 47 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count Ext] = 00h
[Count] = 00h
[LBA Lo Ext] = 00h
[LBA Lo] = 00h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (us): 323.37
Read Log Ext DMA returning: SUCCESS
Sending ATA Read Log Ext DMA command - Log 30h
Sending SAT ATA Pass-Through Command:
Protocol: UDMA
Data Direction: Data In
Task File Registers:
[FeatureExt] = 00h
[Feature] = 00h
[CountExt] = 00h
[Count] = 01h
[LBA Lo Ext] = 00h
[LBA Lo] = 30h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 47h
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 15 0E 00 00 00 01 00 30 00 00 00 00 A0 47 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count Ext] = 00h
[Count] = 00h
[LBA Lo Ext] = 00h
[LBA Lo] = 00h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (ms): 2.32
Read Log Ext DMA returning: SUCCESS
Sending ATA Read Log Ext DMA command - Log 30h
Sending SAT ATA Pass-Through Command:
Protocol: UDMA
Data Direction: Data In
Task File Registers:
[FeatureExt] = 00h
[Feature] = 00h
[CountExt] = 00h
[Count] = 01h
[LBA Lo Ext] = 00h
[LBA Lo] = 30h
[LBA Mid Ext] = 00h
[LBA Mid] = 01h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 47h
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 15 0E 00 00 00 01 00 30 00 01 00 00 A0 47 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count Ext] = 00h
[Count] = 00h
[LBA Lo Ext] = 00h
[LBA Lo] = 00h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (ms): 2.35
Read Log Ext DMA returning: SUCCESS
Sending ATA Read Log Ext DMA command - Log 30h
Sending SAT ATA Pass-Through Command:
Protocol: UDMA
Data Direction: Data In
Task File Registers:
[FeatureExt] = 00h
[Feature] = 00h
[CountExt] = 00h
[Count] = 01h
[LBA Lo Ext] = 00h
[LBA Lo] = 30h
[LBA Mid Ext] = 00h
[LBA Mid] = 03h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 47h
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 15 0E 00 00 00 01 00 30 00 03 00 00 A0 47 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count Ext] = 00h
[Count] = 00h
[LBA Lo Ext] = 00h
[LBA Lo] = 00h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (ms): 2.37
Read Log Ext DMA returning: SUCCESS
Sending ATA Read Log Ext DMA command - Log 04h
Sending SAT ATA Pass-Through Command:
Protocol: UDMA
Data Direction: Data In
Task File Registers:
[FeatureExt] = 00h
[Feature] = 00h
[CountExt] = 00h
[Count] = 01h
[LBA Lo Ext] = 00h
[LBA Lo] = 04h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 47h
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 15 0E 00 00 00 01 00 04 00 00 00 00 A0 47 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count Ext] = 00h
[Count] = 00h
[LBA Lo Ext] = 00h
[LBA Lo] = 00h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (ms): 1.78
Read Log Ext DMA returning: SUCCESS
Sending ATA Read Log Ext DMA command - Log 04h
Sending SAT ATA Pass-Through Command:
Protocol: UDMA
Data Direction: Data In
Task File Registers:
[FeatureExt] = 00h
[Feature] = 00h
[CountExt] = 00h
[Count] = 01h
[LBA Lo Ext] = 00h
[LBA Lo] = 04h
[LBA Mid Ext] = 00h
[LBA Mid] = 01h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 47h
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 15 0E 00 00 00 01 00 04 00 01 00 00 A0 47 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count Ext] = 00h
[Count] = 00h
[LBA Lo Ext] = 00h
[LBA Lo] = 00h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (ms): 1.81
Read Log Ext DMA returning: SUCCESS
/dev/sg4 - ST6000DM003-2CY186 - WCT1TRX5 - ATA
Requesting SCSI Supported Op Codes
CDB:
0 1 2 3 4 5 6 7 8 9 A B
0x00 A3 0C 01 04 00 00 00 00 00 0A 00 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Information: 0000000000000000h
Command Specific Information: 0000000000000000h
Command Time (us): 39.68
Supported Op Codes returning: SUCCESS
Sending ATA Read Log Ext DMA command - Log 00h
Sending SAT ATA Pass-Through Command:
Protocol: UDMA
Data Direction: Data In
Task File Registers:
[FeatureExt] = 00h
[Feature] = 00h
[CountExt] = 00h
[Count] = 01h
[LBA Lo Ext] = 00h
[LBA Lo] = 00h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 47h
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 15 0E 00 00 00 01 00 00 00 00 00 00 A0 47 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count Ext] = 00h
[Count] = 00h
[LBA Lo Ext] = 00h
[LBA Lo] = 00h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (us): 337.77
Read Log Ext DMA returning: SUCCESS
Sending ATA Read Log Ext DMA command - Log 30h
Sending SAT ATA Pass-Through Command:
Protocol: UDMA
Data Direction: Data In
Task File Registers:
[FeatureExt] = 00h
[Feature] = 00h
[CountExt] = 00h
[Count] = 01h
[LBA Lo Ext] = 00h
[LBA Lo] = 30h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 47h
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 15 0E 00 00 00 01 00 30 00 00 00 00 A0 47 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count Ext] = 00h
[Count] = 00h
[LBA Lo Ext] = 00h
[LBA Lo] = 00h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (ms): 2.41
Read Log Ext DMA returning: SUCCESS
Sending ATA Read Log Ext DMA command - Log 30h
Sending SAT ATA Pass-Through Command:
Protocol: UDMA
Data Direction: Data In
Task File Registers:
[FeatureExt] = 00h
[Feature] = 00h
[CountExt] = 00h
[Count] = 01h
[LBA Lo Ext] = 00h
[LBA Lo] = 30h
[LBA Mid Ext] = 00h
[LBA Mid] = 06h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 47h
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 15 0E 00 00 00 01 00 30 00 06 00 00 A0 47 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count Ext] = 00h
[Count] = 00h
[LBA Lo Ext] = 00h
[LBA Lo] = 00h
[LBA Mid Ext] = 00h
[LBA Mid] = 00h
[LBA Hi Ext] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (ms): 2.38
Read Log Ext DMA returning: SUCCESS
Sending ATA SMART command - Read Data
Sending SAT ATA Pass-Through Command:
Protocol: PIO
Data Direction: Data In
Task File Registers:
[Feature] = D0h
[Count] = 01h
[LBA Lo] = 00h
[LBA Mid] = 4Fh
[LBA Hi] = C2h
[DeviceHead] = A0h
[Command] = B0h
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 08 0E 00 D0 00 01 00 00 00 4F 00 C2 A0 B0 00
Sense Data Buffer:
0 1 2 3 4 5 6 7
0x00 00 00 00 00 00 00 00 00
Sense Key: 0h = No Error
ASC & ASCQ: 0h - 0h = No Additional Sense Information
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count] = 00h
[LBA Lo] = 00h
[LBA Mid] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (ms): 293.95
SMART Read Data returning: SUCCESS
Sending ATA Trusted Receive DMA
Sending SAT ATA Pass-Through Command:
Protocol: UDMA
Data Direction: Data In
Task File Registers:
[Feature] = 01h
[Count] = 01h
[LBA Lo] = 00h
[LBA Mid] = 01h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 5Dh
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 14 0E 00 01 00 01 00 00 00 01 00 00 A0 5D 00
Sense Data Buffer:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 C0
0x10 00 0E 00 00 00 00 00 00 00 00
Sense Key: 5h = Illegal Request
ASC & ASCQ: 24h - 0h = Invalid Field In CDB
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count] = 00h
[LBA Lo] = 00h
[LBA Mid] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (us): 114.82
Sending SAT ATA Pass-Through Command:
Protocol: DMA
Data Direction: Data In
Task File Registers:
[Feature] = 01h
[Count] = 01h
[LBA Lo] = 00h
[LBA Mid] = 01h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 5Dh
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 0C 0E 00 01 00 01 00 00 00 01 00 00 A0 5D 00
Sense Data Buffer:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 C0
0x10 00 0E 00 00 00 00 00 00 00 00
Sense Key: 5h = Illegal Request
ASC & ASCQ: 24h - 0h = Invalid Field In CDB
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count] = 00h
[LBA Lo] = 00h
[LBA Mid] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (us): 40.51
Trusted Receive DMA returning: NOT SUPPORTED
Sending ATA Trusted Receive
Sending SAT ATA Pass-Through Command:
Protocol: PIO
Data Direction: Data In
Task File Registers:
[Feature] = 01h
[Count] = 01h
[LBA Lo] = 00h
[LBA Mid] = 01h
[LBA Hi] = 00h
[DeviceHead] = A0h
[Command] = 5Ch
CDB:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 85 08 0E 00 01 00 01 00 00 00 01 00 00 A0 5C 00
Sense Data Buffer:
0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 C0
0x10 00 0E 00 00 00 00 00 00 00 00
Sense Key: 5h = Illegal Request
ASC & ASCQ: 24h - 0h = Invalid Field In CDB
FRU: 0h = No Additional Information
Return Task File Registers:
[Error] = 00h
[Count] = 00h
[LBA Lo] = 00h
[LBA Mid] = 00h
[LBA Hi] = 00h
[Device] = 00h
[Status] = 00h
Command Time (us): 79.58
Trusted Receive returning: NOT SUPPORTED
Erase Methods supported by this drive (listed fastest to slowest):
1 Write Same Erase
NOTE: Host may abort erase with disc access.
2 Overwrite Erase
The minimum time to overwrite erase this drive is approximately:
11 hours 34 minutes
The actual time to erase may take longer.
pierre@banyan:~/Public/Technique/Config Locale/Disques/SeaChest/SeaChestUtilities/Linux/Lin64$
