Voici le retour des commandes :
XXX@Samsung:~$ free -h
total utilisé libre partagé tamp/cache disponible
Mem: 3,7Gi 2,2Gi 276Mi 329Mi 1,3Gi 1,0Gi
Partition d'échange: 14Gi 710Mi 14Gi
XXX@Samsung:~$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 20.04 LTS
Release: 20.04
Codename: focal
XXX@Samsung:~$ sudo smartctl -a /dev/sda
[sudo] Mot de passe de XXX :
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-31-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Samsung SpinPoint M8 (AF)
Device Model: ST1000LM024 HN-M101MBB
Serial Number: S2RQJ9FD110499
LU WWN Device Id: 5 0004cf 2097260a4
Firmware Version: 2AR10002
User Capacity: 1000204886016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed May 27 14:01:43 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (13140) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 219) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 4572
2 Throughput_Performance 0x0026 055 055 000 Old_age Always - 12061
3 Spin_Up_Time 0x0023 089 084 025 Pre-fail Always - 3451
4 Start_Stop_Count 0x0032 083 083 000 Old_age Always - 17421
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 18096
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 174
12 Power_Cycle_Count 0x0032 085 085 000 Old_age Always - 16067
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 1429
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 049 000 Old_age Always - 36 (Min/Max 15/52)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 62
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 62
199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 2
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 5314
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 174
225 Load_Cycle_Count 0x0032 064 064 000 Old_age Always - 364511
SMART Error Log Version: 1
ATA Error Count: 3760 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3760 occurred at disk power-on lifetime: 17601 hours (733 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 78 72 06 e8 Error: UNC 8 sectors at LBA = 0x08067278 = 134640248
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 78 72 06 e8 00 00:00:00.309 READ DMA
c8 00 08 08 1b 48 e2 00 00:00:00.309 READ DMA
27 00 00 00 00 00 e0 00 00:00:00.309 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:00:00.309 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:00:00.309 SET FEATURES [Set transfer mode]
Error 3759 occurred at disk power-on lifetime: 17601 hours (733 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 78 72 06 e8 Error: UNC 8 sectors at LBA = 0x08067278 = 134640248
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 78 72 06 e8 00 00:00:00.307 READ DMA
c8 00 00 08 1a 48 e2 00 00:00:00.307 READ DMA
27 00 00 00 00 00 e0 00 00:00:00.307 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:00:00.307 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:00:00.307 SET FEATURES [Set transfer mode]
Error 3758 occurred at disk power-on lifetime: 17601 hours (733 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 20 78 72 06 e8 Error: UNC 32 sectors at LBA = 0x08067278 = 134640248
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 20 78 72 06 e8 00 00:00:00.305 READ DMA
c8 00 08 70 72 06 e8 00 00:00:00.305 READ DMA
c8 00 20 f8 71 06 e8 00 00:00:00.305 READ DMA
c8 00 08 f0 71 06 e8 00 00:00:00.305 READ DMA
c8 00 20 c0 71 06 e8 00 00:00:00.305 READ DMA
Error 3757 occurred at disk power-on lifetime: 17601 hours (733 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 78 72 06 e8 Error: UNC 8 sectors at LBA = 0x08067278 = 134640248
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 78 72 06 e8 00 00:00:00.249 READ DMA
27 00 00 00 00 00 e0 00 00:00:00.249 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:00:00.249 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:00:00.249 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:00:00.249 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 3756 occurred at disk power-on lifetime: 17601 hours (733 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 78 72 06 e8 Error: UNC 8 sectors at LBA = 0x08067278 = 134640248
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 78 72 06 e8 00 00:00:00.247 READ DMA
27 00 00 00 00 00 e0 00 00:00:00.247 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:00:00.247 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:00:00.247 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:00:00.247 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 17436 46350736
# 2 Extended offline Completed: read failure 90% 17433 46350736
# 3 Short offline Completed: read failure 90% 17433 46350736
# 4 Short offline Completed: read failure 90% 17429 46350736
# 5 Extended offline Completed: read failure 90% 17424 46350736
# 6 Short offline Completed: read failure 90% 17423 46350736
# 7 Extended offline Completed: read failure 90% 17421 46350736
# 8 Short offline Completed: read failure 90% 17406 46350736
# 9 Short offline Completed: read failure 90% 17406 46350736
#10 Short offline Completed: read failure 90% 17406 46350736
#11 Short offline Completed: read failure 90% 17406 46350736
#12 Extended offline Completed: read failure 90% 17405 46350736
#13 Extended offline Completed: read failure 90% 17405 46350736
#14 Short offline Completed: read failure 90% 17405 46350736
#15 Short offline Completed: read failure 90% 17405 46350736
#16 Short offline Completed: read failure 90% 17405 46350736
#17 Extended offline Completed: read failure 90% 17404 46350736
#18 Short offline Completed: read failure 90% 17317 1778271120
#19 Short offline Completed: read failure 90% 17317 1778271120
#20 Extended offline Completed without error 00% 11579 -
#21 Short offline Completed without error 00% 11576 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed_read_failure [90% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Je comprends le retour des deux premières commandes, mais pour smartctl, je me perds vite dans les résultats ...
Pour ce qui est du processeur, voici ce que j'ai trouvé : 4 x Intel Core i5 CPU 2.5GHz.
Concernant la désactivation de la carte graphique Radeon, s'il faut modifier les paramètres du noyau, cela me demandera de regarder ça tranquilement, car cela dépasse de loin mes compétences. J'utilise linux depuis plusieurs années, mais je suis surtout un curieux et un "bricoleur", pas du tout quelqu'un qui maîtrise le sujet !
