bussiere@bussiere-PPPPPPP-CCC-MMMMM:~$ sudo apt-get install --no-install-recommends smartmontools
[sudo] Mot de passe de bussiere :
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Paquets suggérés :
gsmartcontrol smart-notifier
Les NOUVEAUX paquets suivants seront installés :
smartmontools
0 mis à jour, 1 nouvellement installés, 0 à enlever et 7 non mis à jour.
Il est nécessaire de prendre 436 ko dans les archives.
Après cette opération, 1 497 ko d'espace disque supplémentaires seront utilisés.
Réception de :1 http://fr.archive.ubuntu.com/ubuntu xenial/main i386 smartmontools i386 6.4+svn4214-1 [436 kB]
436 ko réceptionnés en 0s (1 975 ko/s)
Sélection du paquet smartmontools précédemment désélectionné.
(Lecture de la base de données... 351179 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../smartmontools_6.4+svn4214-1_i386.deb ...
Dépaquetage de smartmontools (6.4+svn4214-1) ...
Traitement des actions différées (« triggers ») pour man-db (2.7.5-1) ...
Traitement des actions différées (« triggers ») pour systemd (229-4ubuntu21.28) ...
Traitement des actions différées (« triggers ») pour ureadahead (0.100.0-19.1) ...
ureadahead will be reprofiled on next reboot
Paramétrage de smartmontools (6.4+svn4214-1) ...
Traitement des actions différées (« triggers ») pour systemd (229-4ubuntu21.28) ...
Traitement des actions différées (« triggers ») pour ureadahead (0.100.0-19.1) ...
bussiere@bussiere-PPPPPPP-CCC-MMMMM:~$ sudo smartctl -s on -a /dev/sda
smartctl 6.5 2016-01-24 r4214 [i686-linux-4.4.0-189-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint P80
Device Model: SAMSUNG SP1604N
Serial Number: S013J10Y622200
Firmware Version: TM100-24
User Capacity: 160 041 885 696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 T13/1532D revision 0
Local Time is: Sun Sep 6 20:51:01 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 5760) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 96) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 063 011 000 Pre-fail Always - 6272
4 Start_Stop_Count 0x0032 090 090 000 Old_age Always - 10288
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0024 253 253 000 Old_age Offline - 0
9 Power_On_Half_Minutes 0x0032 087 087 000 Old_age Always - 66660h+52m
10 Spin_Retry_Count 0x0013 253 253 049 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 095 095 000 Old_age Always - 5574
194 Temperature_Celsius 0x0022 187 100 000 Old_age Always - 17
195 Hardware_ECC_Recovered 0x000a 100 100 000 Old_age Always - 317165844
196 Reallocated_Event_Count 0x0012 100 100 000 Old_age Always - 1
197 Current_Pending_Sector 0x0033 253 253 010 Pre-fail Always - 0
198 Offline_Uncorrectable 0x0031 100 100 010 Pre-fail Offline - 1
199 UDMA_CRC_Error_Count 0x000b 100 100 051 Pre-fail Always - 0
200 Multi_Zone_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0
201 Soft_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0
SMART Error Log Version: 1
ATA Error Count: 2336 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2336 occurred at disk power-on lifetime: 65535 hours (2730 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 fe 00 00 00 40 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ef 05 fe 00 00 00 40 00 00:19:09.000 SET FEATURES [Enable APM]
c8 00 20 88 40 f5 e5 00 00:19:09.000 READ DMA
c8 00 b0 20 c8 e2 e0 00 00:19:08.938 READ DMA
c8 00 58 58 83 b4 e8 00 00:19:08.938 READ DMA
ec 00 01 00 00 00 40 00 00:19:08.938 IDENTIFY DEVICE
Error 2335 occurred at disk power-on lifetime: 65535 hours (2730 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 fe 00 00 00 40 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ef 05 fe 00 00 00 40 00 00:17:10.500 SET FEATURES [Enable APM]
ec 00 01 00 00 00 40 00 00:17:10.500 IDENTIFY DEVICE
c8 00 60 e0 98 3e e6 00 00:17:10.500 READ DMA
c8 00 88 40 99 3e e6 00 00:17:10.500 READ DMA
c8 00 20 c0 98 3e e6 00 00:17:10.500 READ DMA
Error 2334 occurred at disk power-on lifetime: 65535 hours (2730 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 fe 00 00 00 40 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ef 05 fe 00 00 00 40 00 00:03:37.938 SET FEATURES [Enable APM]
ec 00 01 00 00 00 40 00 00:03:37.875 IDENTIFY DEVICE
c8 00 60 e0 98 3e e6 00 00:03:37.813 READ DMA
c8 00 88 40 99 3e e6 00 00:03:37.813 READ DMA
c8 00 20 c0 98 3e e6 00 00:03:37.750 READ DMA
Error 2333 occurred at disk power-on lifetime: 65535 hours (2730 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 fe 00 00 00 40 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ef 05 fe 00 00 00 40 00 00:32:34.313 SET FEATURES [Enable APM]
ec 00 01 00 00 00 40 00 00:32:34.313 IDENTIFY DEVICE
c8 00 60 e0 98 3e e6 00 00:32:34.313 READ DMA
c8 00 88 40 99 3e e6 00 00:32:34.313 READ DMA
c8 00 20 c0 98 3e e6 00 00:32:34.313 READ DMA
Error 2332 occurred at disk power-on lifetime: 65535 hours (2730 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 fe 00 00 00 40 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ef 05 fe 00 00 00 40 00 00:15:33.063 SET FEATURES [Enable APM]
c8 00 08 50 49 e8 ef 00 00:15:33.063 READ DMA
c8 00 00 b0 32 d5 e7 00 00:15:33.063 READ DMA
c8 00 00 00 91 31 e0 00 00:15:33.063 READ DMA
ec 00 01 00 00 00 40 00 00:15:33.000 IDENTIFY DEVICE
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 58548 -
# 2 Short offline Completed without error 00% 58513 -
# 3 Short offline Completed without error 00% 47920 -
# 4 Short offline Completed without error 00% 0 -
Selective Self-tests/Logging not supported
bussiere@bussiere-PPPPPPP-CCC-MMMMM:~$
