Le redémarrage a pris aussi 5 minutes exactement.
Voilà:
[ 0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-02-17
[ 0.000000] Linux version 4.15.0-117-generic (buildd@lcy01-amd64-008) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #118-Ubuntu SMP Fri Sep 4 20:02:41 UTC 2020 (Ubuntu 4.15.0-117.118-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-117-generic root=UUID=e7009587-8685-412b-99bd-8d1ca753a84a ro quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd906fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd907000-0x00000000ddb15fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ddb16000-0x00000000ddc2dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ddc2e000-0x00000000dedd8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dedd9000-0x00000000dedd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dedda000-0x00000000dee1cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dee1d000-0x00000000df232fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df233000-0x00000000df7f3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df7f4000-0x00000000df7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: MSI MS-7756/H77MA-G43 (MS-7756), BIOS V1.6 06/19/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FF0000000 write-back
[ 0.000000] 2 base 210000000 mask FF8000000 write-back
[ 0.000000] 3 base 218000000 mask FFC000000 write-back
[ 0.000000] 4 base 21C000000 mask FFE000000 write-back
[ 0.000000] 5 base 21E000000 mask FFF000000 write-back
[ 0.000000] 6 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 8176M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] RAMDISK: [mem 0x334ad000-0x35a4dfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DDC1F070 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DDC28ED8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DDC1F170 009D63 (v02 ALASKA A M I 00000021 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000DDC2C080 000040
[ 0.000000] ACPI: APIC 0x00000000DDC28FE8 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DDC29060 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000DDC290A8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DDC290E8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DDC29120 0004E9 (v01 IdeRef IdeTable 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DDC29610 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000DDC29FC0 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21efd0000-0x21effafff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000021effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dd906fff]
[ 0.000000] node 0: [mem 0x00000000dedd9000-0x00000000dedd9fff]
[ 0.000000] node 0: [mem 0x00000000dee1d000-0x00000000df232fff]
[ 0.000000] node 0: [mem 0x00000000df7f4000-0x00000000df7fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021effffff]
[ 0.000000] Reserved but unavailable: 99 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[ 0.000000] On node 0 totalpages: 2084039
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14133 pages used for memmap
[ 0.000000] DMA32 zone: 904490 pages, LIFO batch:31
[ 0.000000] Normal zone: 18368 pages used for memmap
[ 0.000000] Normal zone: 1175552 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] TSC deadline timer available
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd907000-0xddb15fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xddb16000-0xddc2dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xddc2e000-0xdedd8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdedda000-0xdee1cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf233000-0xdf7f3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x500 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s147456 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2051453
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-117-generic root=UUID=e7009587-8685-412b-99bd-8d1ca753a84a ro quiet splash vt.handoff=1
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8071248K/8336156K available (12300K kernel code, 2481K rwdata, 4272K rodata, 2436K init, 2724K bss, 264908K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39392 entries in 154 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] vt handoff: transparent VT on vt#1
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 3100.019 MHz processor
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6200.03 BogoMIPS (lpj=12400076)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: becoming mindful.
[ 0.024000] AppArmor: AppArmor initialized
[ 0.028140] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.028722] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.028757] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.028775] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.028959] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.028959] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.028970] CPU0: Thermal monitoring enabled (TM1)
[ 0.028977] process: using mwait in idle threads
[ 0.028979] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.028980] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.028981] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.028983] Spectre V2 : Mitigation: Full generic retpoline
[ 0.028983] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.028984] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.028992] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.028992] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.028993] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.029016] MDS: Mitigation: Clear CPU buffers
[ 0.029168] Freeing SMP alternatives memory: 36K
[ 0.032066] smpboot: CPU0: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.032129] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.032148] ... version: 3
[ 0.032148] ... bit width: 48
[ 0.032149] ... generic registers: 4
[ 0.032149] ... value mask: 0000ffffffffffff
[ 0.032150] ... max period: 00007fffffffffff
[ 0.032150] ... fixed-purpose events: 3
[ 0.032151] ... event mask: 000000070000000f
[ 0.032183] Hierarchical SRCU implementation.
[ 0.032939] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.032953] smp: Bringing up secondary CPUs ...
[ 0.033029] x86: Booting SMP configuration:
[ 0.033030] .... node #0, CPUs: #1 #2
[ 0.038351] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.038351] #3
[ 0.040021] smp: Brought up 1 node, 4 CPUs
[ 0.040021] smpboot: Max logical packages: 1
[ 0.040021] smpboot: Total of 4 processors activated (24800.15 BogoMIPS)
[ 0.042506] devtmpfs: initialized
[ 0.042506] x86/mm: Memory block size: 128MB
[ 0.042506] evm: security.selinux
[ 0.042506] evm: security.SMACK64
[ 0.042506] evm: security.SMACK64EXEC
[ 0.042506] evm: security.SMACK64TRANSMUTE
[ 0.042506] evm: security.SMACK64MMAP
[ 0.042506] evm: security.apparmor
[ 0.042506] evm: security.ima
[ 0.042506] evm: security.capability
[ 0.042506] PM: Registering ACPI NVS region [mem 0xddb16000-0xddc2dfff] (1146880 bytes)
[ 0.042506] PM: Registering ACPI NVS region [mem 0xdedda000-0xdee1cfff] (274432 bytes)
[ 0.042557] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.042557] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.042557] pinctrl core: initialized pinctrl subsystem
[ 0.042557] RTC time: 7:12:12, date: 09/16/20
[ 0.042557] NET: Registered protocol family 16
[ 0.042557] audit: initializing netlink subsys (disabled)
[ 0.042557] audit: type=2000 audit(1600240332.040:1): state=initialized audit_enabled=0 res=1
[ 0.044035] cpuidle: using governor ladder
[ 0.044035] cpuidle: using governor menu
[ 0.044040] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.044041] ACPI: bus type PCI registered
[ 0.044042] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.044089] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.044091] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.044099] PCI: Using configuration type 1 for base access
[ 0.044126] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.044995] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.044995] ACPI: Added _OSI(Module Device)
[ 0.044995] ACPI: Added _OSI(Processor Device)
[ 0.044995] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.044995] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.044995] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.044995] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.044995] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.044995] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.048548] ACPI: Dynamic OEM Table Load:
[ 0.048553] ACPI: SSDT 0xFFFF9484153D7000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.048692] ACPI: Dynamic OEM Table Load:
[ 0.048692] ACPI: SSDT 0xFFFF948414C3EC00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.048694] ACPI: Dynamic OEM Table Load:
[ 0.048694] ACPI: SSDT 0xFFFF948414D01E00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.049049] ACPI: Interpreter enabled
[ 0.049067] ACPI: (supports S0 S3 S4 S5)
[ 0.049068] ACPI: Using IOAPIC for interrupt routing
[ 0.049094] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.049447] ACPI: Enabled 15 GPEs in block 00 to 3F
[ 0.058513] ACPI: Power Resource [FN00] (off)
[ 0.058596] ACPI: Power Resource [FN01] (off)
[ 0.058678] ACPI: Power Resource [FN02] (off)
[ 0.058757] ACPI: Power Resource [FN03] (off)
[ 0.058836] ACPI: Power Resource [FN04] (off)
[ 0.059490] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.059495] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.059785] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.059973] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.059974] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.060542] PCI host bridge to bus 0000:00
[ 0.060544] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.060545] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.060546] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.060547] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.060548] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.060549] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.060550] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.060550] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.060551] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.060552] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.060559] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.060652] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.060682] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.060784] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.060807] pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
[ 0.060871] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.060953] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.060976] pci 0000:00:16.0: reg 0x10: [mem 0xf7f19000-0xf7f1900f 64bit]
[ 0.061046] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.061133] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.061153] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f17000-0xf7f173ff]
[ 0.061232] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.061313] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.061333] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit]
[ 0.061402] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.061487] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.061565] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.061653] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.061730] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.061821] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.061841] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f16000-0xf7f163ff]
[ 0.061919] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.062000] pci 0000:00:1f.0: [8086:1e4a] type 00 class 0x060100
[ 0.062174] pci 0000:00:1f.2: [8086:1e00] type 00 class 0x01018f
[ 0.062189] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.062195] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.062201] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.062207] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.062214] pci 0000:00:1f.2: reg 0x20: [io 0xf090-0xf09f]
[ 0.062220] pci 0000:00:1f.2: reg 0x24: [io 0xf080-0xf08f]
[ 0.062317] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.062334] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f15000-0xf7f150ff 64bit]
[ 0.062352] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.062442] pci 0000:00:1f.5: [8086:1e08] type 00 class 0x010185
[ 0.062457] pci 0000:00:1f.5: reg 0x10: [io 0xf070-0xf077]
[ 0.062463] pci 0000:00:1f.5: reg 0x14: [io 0xf060-0xf063]
[ 0.062469] pci 0000:00:1f.5: reg 0x18: [io 0xf050-0xf057]
[ 0.062475] pci 0000:00:1f.5: reg 0x1c: [io 0xf040-0xf043]
[ 0.062481] pci 0000:00:1f.5: reg 0x20: [io 0xf030-0xf03f]
[ 0.062488] pci 0000:00:1f.5: reg 0x24: [io 0xf020-0xf02f]
[ 0.062617] pci 0000:01:00.0: [1002:683f] type 00 class 0x030000
[ 0.062632] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.062639] pci 0000:01:00.0: reg 0x18: [mem 0xf7e00000-0xf7e3ffff 64bit]
[ 0.062644] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.062652] pci 0000:01:00.0: reg 0x30: [mem 0xf7e40000-0xf7e5ffff pref]
[ 0.062657] pci 0000:01:00.0: enabling Extended Tags
[ 0.062688] pci 0000:01:00.0: supports D1 D2
[ 0.062689] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.062728] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
[ 0.062742] pci 0000:01:00.1: reg 0x10: [mem 0xf7e60000-0xf7e63fff 64bit]
[ 0.062765] pci 0000:01:00.1: enabling Extended Tags
[ 0.062795] pci 0000:01:00.1: supports D1 D2
[ 0.076018] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.076021] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.076024] pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.076028] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.076089] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.076159] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.076192] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.076224] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 0.076243] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.076361] pci 0000:03:00.0: supports D1 D2
[ 0.076362] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.088027] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.088031] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.088040] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.088739] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.088804] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.088867] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.088929] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.088995] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.089057] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.089119] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.089181] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.092003] SCSI subsystem initialized
[ 0.092017] libata version 3.00 loaded.
[ 0.092022] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.092022] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.092022] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.092022] vgaarb: loaded
[ 0.092023] ACPI: bus type USB registered
[ 0.092035] usbcore: registered new interface driver usbfs
[ 0.092040] usbcore: registered new interface driver hub
[ 0.092051] usbcore: registered new device driver usb
[ 0.092078] EDAC MC: Ver: 3.0.0
[ 0.092078] PCI: Using ACPI for IRQ routing
[ 0.093480] PCI: pci_cache_line_size set to 64 bytes
[ 0.093516] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.093517] e820: reserve RAM buffer [mem 0xdd907000-0xdfffffff]
[ 0.093518] e820: reserve RAM buffer [mem 0xdedda000-0xdfffffff]
[ 0.093519] e820: reserve RAM buffer [mem 0xdf233000-0xdfffffff]
[ 0.093520] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 0.093520] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.093520] NetLabel: Initializing
[ 0.093520] NetLabel: domain hash size = 128
[ 0.093520] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.093520] NetLabel: unlabeled traffic allowed by default
[ 0.093520] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.093520] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.096018] clocksource: Switched to clocksource hpet
[ 0.104864] VFS: Disk quotas dquot_6.6.0
[ 0.104879] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.104962] AppArmor: AppArmor Filesystem Enabled
[ 0.104987] pnp: PnP ACPI init
[ 0.105101] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.105106] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.105190] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.105192] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.105193] system 00:01: [io 0xffff] has been reserved
[ 0.105194] system 00:01: [io 0xffff] has been reserved
[ 0.105195] system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.105196] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.105197] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.105198] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.105201] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.105223] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.105272] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.105276] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.105427] system 00:04: [io 0x0a00-0x0a1f] has been reserved
[ 0.105428] system 00:04: [io 0x0a30-0x0a3f] has been reserved
[ 0.105431] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.105685] pnp 00:05: [dma 0 disabled]
[ 0.105725] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.105777] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.105780] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.106071] pnp 00:07: [dma 3]
[ 0.106173] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.106427] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.106429] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.106430] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.106431] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.106432] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.106433] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.106434] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.106435] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.106436] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.106438] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.106439] system 00:08: [mem 0xf0100000-0xf0100fff] has been reserved
[ 0.106442] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.106600] pnp: PnP ACPI: found 9 devices
[ 0.112462] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.112486] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.112488] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.112490] pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.112492] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.112494] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.112504] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.112505] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.112511] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.112516] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.112517] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.112518] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.112519] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.112520] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.112521] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
[ 0.112522] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff window]
[ 0.112523] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff window]
[ 0.112524] pci_bus 0000:00: resource 12 [mem 0xe0000000-0xfeafffff window]
[ 0.112525] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.112526] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 0.112527] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.112528] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.112529] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.112626] NET: Registered protocol family 2
[ 0.112753] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.112854] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.112966] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.112999] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.113021] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.113069] NET: Registered protocol family 1
[ 0.113580] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.113586] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
[ 0.113587] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.113597] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.113662] Unpacking initramfs...
[ 0.536901] Freeing initrd memory: 38532K
[ 0.536959] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.536960] software IO TLB: mapped [mem 0xd9907000-0xdd907000] (64MB)
[ 0.537191] Scanning for low memory corruption every 60 seconds
[ 0.537734] Initialise system trusted keyrings
[ 0.537744] Key type blacklist registered
[ 0.537779] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.538659] zbud: loaded
[ 0.539052] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.539155] fuse init (API version 7.26)
[ 0.540455] Key type asymmetric registered
[ 0.540456] Asymmetric key parser 'x509' registered
[ 0.540491] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.540524] io scheduler noop registered
[ 0.540524] io scheduler deadline registered
[ 0.540544] io scheduler cfq registered (default)
[ 0.541086] vesafb: mode is 1920x1200x32, linelength=7680, pages=0
[ 0.541086] vesafb: scrolling: redraw
[ 0.541087] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.541099] vesafb: framebuffer at 0xe0000000, mapped to 0x (ptrval), using 9024k, total 9024k
[ 0.541186] Console: switching to colour frame buffer device 240x75
[ 0.541213] fb0: VESA VGA frame buffer device
[ 0.541223] intel_idle: MWAIT substates: 0x1120
[ 0.541224] intel_idle: v0.4.1 model 0x2A
[ 0.541328] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.541421] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.541446] ACPI: Power Button [PWRB]
[ 0.541480] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.541496] ACPI: Power Button [PWRF]
[ 0.542108] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.542191] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.542192] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.542467] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.542468] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.542586] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.563074] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.564829] Linux agpgart interface v0.103
[ 0.565980] loop: module loaded
[ 0.566069] ata_piix 0000:00:1f.2: version 2.13
[ 0.566172] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.566514] scsi host0: ata_piix
[ 0.566597] scsi host1: ata_piix
[ 0.566626] ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 19
[ 0.566629] ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 19
[ 0.566724] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.724058] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[ 0.724454] scsi host2: ata_piix
[ 0.724616] scsi host3: ata_piix
[ 0.724652] ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 19
[ 0.724653] ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 19
[ 0.724720] libphy: Fixed MDIO Bus: probed
[ 0.724722] tun: Universal TUN/TAP device driver, 1.6
[ 0.724839] PPP generic driver version 2.4.2
[ 0.724899] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.724903] ehci-pci: EHCI PCI platform driver
[ 0.725013] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.725019] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.725031] ehci-pci 0000:00:1a.0: debug port 2
[ 0.728940] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.728948] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f17000
[ 0.744024] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.744076] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.744077] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.744078] usb usb1: Product: EHCI Host Controller
[ 0.744079] usb usb1: Manufacturer: Linux 4.15.0-117-generic ehci_hcd
[ 0.744080] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.744171] hub 1-0:1.0: USB hub found
[ 0.744176] hub 1-0:1.0: 2 ports detected
[ 0.744378] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.744381] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.744390] ehci-pci 0000:00:1d.0: debug port 2
[ 0.748288] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.748297] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f16000
[ 0.764014] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.764043] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.764044] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.764045] usb usb2: Product: EHCI Host Controller
[ 0.764046] usb usb2: Manufacturer: Linux 4.15.0-117-generic ehci_hcd
[ 0.764047] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.764124] hub 2-0:1.0: USB hub found
[ 0.764128] hub 2-0:1.0: 2 ports detected
[ 0.764235] ehci-platform: EHCI generic platform driver
[ 0.764243] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.764245] ohci-pci: OHCI PCI platform driver
[ 0.764251] ohci-platform: OHCI generic platform driver
[ 0.764257] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.764357] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.764361] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.765434] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[ 0.765437] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.765543] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.765545] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.765545] usb usb3: Product: xHCI Host Controller
[ 0.765546] usb usb3: Manufacturer: Linux 4.15.0-117-generic xhci-hcd
[ 0.765547] usb usb3: SerialNumber: 0000:00:14.0
[ 0.765623] hub 3-0:1.0: USB hub found
[ 0.765630] hub 3-0:1.0: 4 ports detected
[ 0.765954] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.765957] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.765959] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.765984] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.765986] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.765986] usb usb4: Product: xHCI Host Controller
[ 0.765987] usb usb4: Manufacturer: Linux 4.15.0-117-generic xhci-hcd
[ 0.765988] usb usb4: SerialNumber: 0000:00:14.0
[ 0.766061] hub 4-0:1.0: USB hub found
[ 0.766069] hub 4-0:1.0: 4 ports detected
[ 0.766418] i8042: PNP: No PS/2 controller found.
[ 0.766473] mousedev: PS/2 mouse device common for all mice
[ 0.766587] rtc_cmos 00:02: RTC can wake from S4
[ 0.766701] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.766724] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.766730] i2c /dev entries driver
[ 0.766768] device-mapper: uevent: version 1.0.3
[ 0.766817] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 0.766822] intel_pstate: Intel P-state driver initializing
[ 0.767054] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.767375] NET: Registered protocol family 10
[ 0.770864] Segment Routing with IPv6
[ 0.770884] NET: Registered protocol family 17
[ 0.770917] Key type dns_resolver registered
[ 0.771102] mce: Using 7 MCE banks
[ 0.771111] RAS: Correctable Errors collector initialized.
[ 0.771138] microcode: sig=0x206a7, pf=0x2, revision=0x2f
[ 0.771284] microcode: Microcode Update Driver: v2.2.
[ 0.771292] sched_clock: Marking stable (771279796, 0)->(758040787, 13239009)
[ 0.771446] registered taskstats version 1
[ 0.771456] Loading compiled-in X.509 certificates
[ 0.773740] Loaded X.509 cert 'Build time autogenerated kernel key: 993aedfcb7091aab7364eeb95e85a8dab512d887'
[ 0.773761] zswap: loaded using pool lzo/zbud
[ 0.776699] Key type big_key registered
[ 0.776702] Key type trusted registered
[ 0.778127] Key type encrypted registered
[ 0.778129] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.778132] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 0.778136] ima: Allocated hash algorithm: sha1
[ 0.778149] evm: HMAC attrs: 0x1
[ 0.778352] Magic number: 4:130:218
[ 0.778401] acpi device:3c: hash matches
[ 0.778463] rtc_cmos 00:02: setting system clock to 2020-09-16 07:12:13 UTC (1600240333)
[ 0.778508] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.778509] EDD information not available.
[ 1.080051] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.100052] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[ 1.100063] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.236451] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.236453] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.236733] hub 1-1:1.0: USB hub found
[ 1.236911] hub 1-1:1.0: 6 ports detected
[ 1.248231] usb 3-3: New USB device found, idVendor=0424, idProduct=2514
[ 1.248232] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.248533] hub 3-3:1.0: USB hub found
[ 1.248593] hub 3-3:1.0: 4 ports detected
[ 1.256418] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.256421] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.256729] hub 2-1:1.0: USB hub found
[ 1.256914] hub 2-1:1.0: 8 ports detected
[ 1.348080] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 1.348092] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[ 1.348234] ata2.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 1.348246] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
[ 1.353394] ata1.00: supports DRM functions and may not be fully accessible
[ 1.353396] ata1.00: ATA-9: Samsung SSD 850 EVO 120GB, EMT01B6Q, max UDMA/133
[ 1.353397] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 1.353569] ata2.00: ATA-8: ST31000524AS, JC4B, max UDMA/133
[ 1.353570] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.353729] ata2.01: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
[ 1.353730] ata2.01: 125045424 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.354817] ata1.01: ATAPI: TSSTcorp CDDVDW SH-222BB, SB00, max UDMA/100
[ 1.355436] ata1.00: supports DRM functions and may not be fully accessible
[ 1.356705] ata1.00: configured for UDMA/133
[ 1.358632] ata2.00: configured for UDMA/133
[ 1.361500] ata1.01: configured for UDMA/100
[ 1.361603] ata2.01: configured for UDMA/133
[ 1.365500] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
[ 1.365721] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.366321] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 1.366353] sd 0:0:0:0: [sda] Write Protect is off
[ 1.366356] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.366757] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.366801] scsi 0:0:1:0: CD-ROM TSSTcorp CDDVDW SH-222BB SB00 PQ: 0 ANSI: 5
[ 1.440025] sr 0:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.440027] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.440182] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.440232] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 1.440435] scsi 1:0:0:0: Direct-Access ATA ST31000524AS JC4B PQ: 0 ANSI: 5
[ 1.440677] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 1.440784] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.440812] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.440814] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.440840] scsi 1:0:1:0: Direct-Access ATA SAMSUNG SSD 830 3B1Q PQ: 0 ANSI: 5
[ 1.440847] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.441007] sd 1:0:1:0: Attached scsi generic sg3 type 0
[ 1.441068] sd 1:0:1:0: [sdc] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 1.441084] sd 1:0:1:0: [sdc] Write Protect is off
[ 1.441086] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.441112] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.442628] sda: sda1 sda2 < sda5 >
[ 1.443221] sd 0:0:0:0: [sda] supports TCG Opal
[ 1.443222] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.462128] sdb: sdb1
[ 1.462374] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.462815] sdc: sdc1
[ 1.463051] sd 1:0:1:0: [sdc] Attached SCSI disk
[ 1.464969] Freeing unused kernel image memory: 2436K
[ 1.488047] Write protecting the kernel read-only data: 20480k
[ 1.488558] Freeing unused kernel image memory: 2008K
[ 1.488871] Freeing unused kernel image memory: 1872K
[ 1.495906] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.495908] x86/mm: Checking user space page tables
[ 1.502644] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.524024] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[ 1.540025] usb 3-3.1: new high-speed USB device number 3 using xhci_hcd
[ 1.568020] tsc: Refined TSC clocksource calibration: 3100.021 MHz
[ 1.568028] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2caf5bd675d, max_idle_ns: 440795281274 ns
[ 1.616459] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.616468] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.617041] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0x (ptrval), 8c:89:a5:c1:9a:5a, XID 0c900800 IRQ 25
[ 1.617042] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.617788] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 1.633486] usb 1-1.2: New USB device found, idVendor=04a9, idProduct=1909
[ 1.633489] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.633491] usb 1-1.2: Product: CanoScan
[ 1.633493] usb 1-1.2: Manufacturer: Canon
[ 1.712021] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
[ 1.728546] usb 3-3.1: New USB device found, idVendor=045e, idProduct=0761
[ 1.728549] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.728551] usb 3-3.1: Product: Microsoft® LifeCam VX-2000
[ 1.728553] usb 3-3.1: Manufacturer: Microsoft
[ 1.763232] random: fast init done
[ 1.764262] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.764275] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.764279] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.816022] usb 3-3.2: new full-speed USB device number 4 using xhci_hcd
[ 1.821537] usb 1-1.5: New USB device found, idVendor=2001, idProduct=3319
[ 1.821540] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.821542] usb 1-1.5: Product: Wireless N Nano USB Adapter
[ 1.821544] usb 1-1.5: Manufacturer: Realtek
[ 1.821545] usb 1-1.5: SerialNumber: 00e04c000001
[ 1.889712] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.918714] usb 3-3.2: New USB device found, idVendor=046d, idProduct=c52e
[ 1.918716] usb 3-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.918717] usb 3-3.2: Product: USB Receiver
[ 1.918718] usb 3-3.2: Manufacturer: Logitech
[ 2.017665] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.025559] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 2.044090] systemd[1]: Detected architecture x86-64.
[ 2.045904] systemd[1]: Set hostname to <sirius>.
[ 2.208491] systemd[1]: Created slice System Slice.
[ 2.208608] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.208720] systemd[1]: Listening on Journal Audit Socket.
[ 2.208737] systemd[1]: Reached target User and Group Name Lookups.
[ 2.208904] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.209020] systemd[1]: Created slice User and Session Slice.
[ 2.209084] systemd[1]: Listening on Syslog Socket.
[ 2.224988] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 2.233847] RPC: Registered named UNIX socket transport module.
[ 2.233848] RPC: Registered udp transport module.
[ 2.233849] RPC: Registered tcp transport module.
[ 2.233850] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.249411] lp: driver loaded but no devices found
[ 2.260979] ppdev: user-space parallel port driver
[ 2.358398] parport_pc 00:07: reported by Plug and Play ACPI
[ 2.358480] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 2.362163] systemd-journald[271]: Received request to flush runtime journal from PID 1
[ 2.363939] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 2.460145] lp0: using parport0 (interrupt-driven).
[ 2.593210] clocksource: Switched to clocksource tsc
[ 2.635583] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[ 2.635589] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[ 2.635593] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.635596] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 2.635599] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 2.635602] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.635604] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 2.635607] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 2.635609] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.635610] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 2.635613] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 2.635617] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.635617] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.642553] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.765489] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.774453] usbcore: registered new interface driver usbhid
[ 2.774455] usbhid: USB HID core driver
[ 2.822862] usbcore: registered new interface driver snd-usb-audio
[ 2.854212] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 2.854215] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[ 2.867667] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input2
[ 2.867733] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input3
[ 2.867796] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input4
[ 2.867859] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input5
[ 2.867919] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input6
[ 2.867979] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input7
[ 2.929609] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 2.929612] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.929614] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.929615] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 2.929616] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 2.929619] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 2.929620] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 2.929622] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 2.944019] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.946604] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.946755] media: Linux media interface: v0.10
[ 2.948780] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 2.948782] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 2.948783] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 2.948783] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 2.949037] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 2.949101] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 2.949154] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 2.949208] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 2.949261] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 2.949314] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 2.949367] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 2.949420] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 2.953546] [drm] radeon kernel modesetting enabled.
[ 2.953585] checking generic (e0000000 8d0000) vs hw (e0000000 10000000)
[ 2.953586] fb: switching to radeondrmfb from VESA VGA
[ 2.953616] Console: switching to colour dummy device 80x25
[ 2.953872] [drm] initializing kernel modesetting (VERDE 0x1002:0x683F 0x174B:0xE213 0x00).
[ 2.953912] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d4000-0x000d7fff window]
[ 2.953916] caller pci_map_rom+0x5d/0xf0 mapping multiple BARs
[ 2.953932] ATOM BIOS: C44501
[ 2.954058] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 2.954059] radeon 0000:01:00.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[ 2.954061] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 2.954062] [drm] RAM width 128bits DDR
[ 2.954119] [TTM] Zone kernel: Available graphics memory: 4058066 kiB
[ 2.954120] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.954121] [TTM] Initializing pool allocator
[ 2.954124] [TTM] Initializing DMA pool allocator
[ 2.954140] [drm] radeon: 1024M of VRAM memory ready
[ 2.954141] [drm] radeon: 2048M of GTT memory ready.
[ 2.954149] [drm] Loading verde Microcode
[ 2.989159] 8192eu: loading out-of-tree module taints kernel.
[ 2.995252] Linux video capture interface: v2.00
[ 2.995715] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.0/0003:046D:C52E.0001/input/input16
[ 2.995743] 8192eu: module verification failed: signature and/or required key missing - tainting kernel
[ 3.017695] uvcvideo: Found UVC 1.00 device Microsoft® LifeCam VX-2000 (045e:0761)
[ 3.019073] uvcvideo 3-3.1:1.0: Entity type for entity Processing 2 was not initialized!
[ 3.019076] uvcvideo 3-3.1:1.0: Entity type for entity Camera 1 was not initialized!
[ 3.019078] uvcvideo 3-3.1:1.0: Entity type for entity Extension 4 was not initialized!
[ 3.019165] input: Microsoft® LifeCam VX-2000: Mi as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0/input/input17
[ 3.023060] [drm] Internal thermal controller with fan control
[ 3.023137] [drm] probing gen 2 caps for device 8086:101 = 2212d02/0
[ 3.030877] [drm] radeon: dpm initialized
[ 3.038396] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[ 3.038679] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 3.041519] [drm] probing gen 2 caps for device 8086:101 = 2212d02/0
[ 3.041522] [drm] PCIE gen 2 link speeds already enabled
[ 3.052138] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3.2/input0
[ 3.052182] usbcore: registered new interface driver uvcvideo
[ 3.052183] USB Video Class driver (1.1.1)
[ 3.052885] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.1/0003:046D:C52E.0002/input/input18
[ 3.087982] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
[ 3.088463] radeon 0000:01:00.0: WB enabled
[ 3.088467] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x (ptrval)
[ 3.088468] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0x (ptrval)
[ 3.088470] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0x (ptrval)
[ 3.088471] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x (ptrval)
[ 3.088473] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0x (ptrval)
[ 3.088858] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0x (ptrval)
[ 3.109327] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0x (ptrval)
[ 3.109329] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0x (ptrval)
[ 3.109411] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.109413] [drm] Driver supports precise vblank timestamp query.
[ 3.109415] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 3.109462] radeon 0000:01:00.0: radeon: using MSI.
[ 3.109489] [drm] radeon: irq initialized.
[ 3.113760] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3.2/input1
[ 3.221647] usbcore: registered new interface driver rtl8192eu
[ 3.577707] intel_rapl: Found RAPL domain package
[ 3.577709] intel_rapl: Found RAPL domain core
[ 3.577709] intel_rapl: Found RAPL domain uncore
[ 3.577715] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 3.577764] [drm] ring test on 0 succeeded in 1 usecs
[ 3.577768] [drm] ring test on 1 succeeded in 1 usecs
[ 3.577772] [drm] ring test on 2 succeeded in 1 usecs
[ 3.577785] [drm] ring test on 3 succeeded in 9 usecs
[ 3.577791] [drm] ring test on 4 succeeded in 3 usecs
[ 3.753513] [drm] ring test on 5 succeeded in 2 usecs
[ 3.753519] [drm] UVD initialized successfully.
[ 3.862743] [drm] ring test on 6 succeeded in 21 usecs
[ 3.862756] [drm] ring test on 7 succeeded in 4 usecs
[ 3.862757] [drm] VCE initialized successfully.
[ 3.862988] [drm] ib test on ring 0 succeeded in 0 usecs
[ 3.863022] [drm] ib test on ring 1 succeeded in 0 usecs
[ 3.863072] [drm] ib test on ring 2 succeeded in 0 usecs
[ 3.863109] [drm] ib test on ring 3 succeeded in 0 usecs
[ 3.863144] [drm] ib test on ring 4 succeeded in 0 usecs
[ 4.053866] rtl8192eu 1-1.5:1.0 wlx542aa274161b: renamed from wlan0
[ 4.157830] Adding 15656956k swap on /dev/sda5. Priority:-2 extents:1 across:15656956k SSFS
[ 4.339782] random: crng init done
[ 4.339787] random: 7 urandom warning(s) missed due to ratelimiting
[ 4.540097] [drm] ib test on ring 5 succeeded
[ 4.802477] audit: type=1400 audit(1600240337.518:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=602 comm="apparmor_parser"
[ 4.802482] audit: type=1400 audit(1600240337.518:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=602 comm="apparmor_parser"
[ 4.802484] audit: type=1400 audit(1600240337.518:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=602 comm="apparmor_parser"
[ 4.805010] audit: type=1400 audit(1600240337.522:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=599 comm="apparmor_parser"
[ 4.805016] audit: type=1400 audit(1600240337.522:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=599 comm="apparmor_parser"
[ 4.805019] audit: type=1400 audit(1600240337.522:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=599 comm="apparmor_parser"
[ 4.805021] audit: type=1400 audit(1600240337.522:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=599 comm="apparmor_parser"
[ 4.807282] audit: type=1400 audit(1600240337.522:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=603 comm="apparmor_parser"
[ 4.808220] audit: type=1400 audit(1600240337.526:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=606 comm="apparmor_parser"
[ 5.052042] [drm] ib test on ring 6 succeeded
[ 5.564115] [drm] ib test on ring 7 succeeded
[ 5.565490] [drm] Radeon Display Connectors
[ 5.565492] [drm] Connector 0:
[ 5.565492] [drm] DP-1
[ 5.565493] [drm] HPD4
[ 5.565495] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 5.565495] [drm] Encoders:
[ 5.565496] [drm] DFP1: INTERNAL_UNIPHY2
[ 5.565497] [drm] Connector 1:
[ 5.565497] [drm] HDMI-A-1
[ 5.565498] [drm] HPD1
[ 5.565499] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[ 5.565500] [drm] Encoders:
[ 5.565501] [drm] DFP2: INTERNAL_UNIPHY2
[ 5.565501] [drm] Connector 2:
[ 5.565502] [drm] DVI-I-1
[ 5.565502] [drm] HPD2
[ 5.565504] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 5.565505] [drm] Encoders:
[ 5.565505] [drm] DFP3: INTERNAL_UNIPHY
[ 5.565506] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 5.614313] [drm] fb mappable at 0xE05D9000
[ 5.614315] [drm] vram apper at 0xE0000000
[ 5.614316] [drm] size 9216000
[ 5.614316] [drm] fb depth is 24
[ 5.614317] [drm] pitch is 7680
[ 5.614393] fbcon: radeondrmfb (fb0) is primary device
[ 5.614514] Console: switching to colour frame buffer device 240x75
[ 5.614558] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 5.636104] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[ 5.786883] [drm] amdgpu kernel modesetting enabled.
[ 6.140402] NFSD: starting 90-second grace period (net f0000099)
[ 6.589461] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 6.725421] r8169 0000:03:00.0 enp3s0: link down
[ 6.725499] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 6.760024] IPv6: ADDRCONF(NETDEV_UP): wlx542aa274161b: link is not ready
[ 8.192847] IPv6: ADDRCONF(NETDEV_UP): wlx542aa274161b: link is not ready
[ 8.340170] IPv6: ADDRCONF(NETDEV_UP): wlx542aa274161b: link is not ready
[ 11.753104] IPv6: ADDRCONF(NETDEV_CHANGE): wlx542aa274161b: link becomes ready
[ 27.750200] FS-Cache: Loaded
[ 27.758839] FS-Cache: Netfs 'nfs' registered for caching
[ 27.774150] NFS: Registering the id_resolver key type
[ 27.774160] Key type id_resolver registered
[ 27.774160] Key type id_legacy registered
[ 296.027619] rfkill: input handler disabled
