autoinstall est bien passé, pas de msg d'erreur
au redémarrage, la webcam est toujours allumée
pour info, si je débranche et rebranche la webcam elle s'allume toujours direct
moi@xxx:~$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-02-17
[ 0.000000] Linux version 5.4.0-48-generic (buildd@lcy01-amd64-023) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #52~18.04.1-Ubuntu SMP Thu Sep 10 12:50:22 UTC 2020 (Ubuntu 5.4.0-48.52~18.04.1-generic 5.4.60)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-48-generic root=UUID=5df46a55-f2d9-40d3-b822-ce465af071ab ro quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000deb8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000deb90000-0x00000000df13ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df140000-0x00000000df391fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df392000-0x00000000df39ffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000df3a0000-0x00000000df3bffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df3c0000-0x00000000df3c4fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000df3c5000-0x00000000df407fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df408000-0x00000000df7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: System manufacturer System Product Name/SABERTOOTH P67, BIOS 3602 11/01/2012
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3310.727 MHz processor
[ 0.001959] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001961] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001966] last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[ 0.001969] MTRR default type: uncachable
[ 0.001970] MTRR fixed ranges enabled:
[ 0.001970] 00000-9FFFF write-back
[ 0.001971] A0000-BFFFF uncachable
[ 0.001972] C0000-CFFFF write-protect
[ 0.001972] D0000-E7FFF uncachable
[ 0.001973] E8000-FFFFF write-protect
[ 0.001973] MTRR variable ranges enabled:
[ 0.001974] 0 base 000000000 mask E00000000 write-back
[ 0.001975] 1 base 200000000 mask FF0000000 write-back
[ 0.001976] 2 base 210000000 mask FF8000000 write-back
[ 0.001976] 3 base 218000000 mask FFC000000 write-back
[ 0.001977] 4 base 21C000000 mask FFE000000 write-back
[ 0.001978] 5 base 21E000000 mask FFF000000 write-back
[ 0.001978] 6 base 0E0000000 mask FE0000000 uncachable
[ 0.001979] 7 disabled
[ 0.001979] 8 disabled
[ 0.001979] 9 disabled
[ 0.002590] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002703] total RAM covered: 8176M
[ 0.003087] Found optimal setting for mtrr clean up
[ 0.003088] gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G
[ 0.003684] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.003688] last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[ 0.011463] found SMP MP-table at [mem 0x000fcd50-0x000fcd5f]
[ 0.037171] check: Scanning 1 areas for low memory corruption
[ 0.037433] RAMDISK: [mem 0x3320f000-0x358fefff]
[ 0.037442] ACPI: Early table checksum verification disabled
[ 0.037444] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
[ 0.037447] ACPI: XSDT 0x00000000DF392070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.037452] ACPI: FACP 0x00000000DF39DAA8 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.037456] ACPI: DSDT 0x00000000DF392168 00B93C (v02 ALASKA A M I 00000015 INTL 20051117)
[ 0.037459] ACPI: FACS 0x00000000DF3BEF80 000040
[ 0.037461] ACPI: APIC 0x00000000DF39DBA0 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.037463] ACPI: MCFG 0x00000000DF39DC18 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.037465] ACPI: HPET 0x00000000DF39DC58 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.037467] ACPI: SSDT 0x00000000DF39DC90 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.037470] ACPI: SSDT 0x00000000DF39E000 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.037472] ACPI: SSDT 0x00000000DF39E9B0 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.037480] ACPI: Local APIC address 0xfee00000
[ 0.037550] No NUMA configuration found
[ 0.037550] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[ 0.037558] NODE_DATA(0) allocated [mem 0x21efd1000-0x21effbfff]
[ 0.037741] Zone ranges:
[ 0.037741] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.037742] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.037743] Normal [mem 0x0000000100000000-0x000000021effffff]
[ 0.037744] Device empty
[ 0.037745] Movable zone start for each node
[ 0.037747] Early memory node ranges
[ 0.037748] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.037749] node 0: [mem 0x0000000000100000-0x00000000deb8ffff]
[ 0.037749] node 0: [mem 0x00000000df408000-0x00000000df7fffff]
[ 0.037750] node 0: [mem 0x0000000100000000-0x000000021effffff]
[ 0.037816] Zeroed struct page in unavailable ranges: 8412 pages
[ 0.037817] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[ 0.037818] On node 0 totalpages: 2088740
[ 0.037819] DMA zone: 64 pages used for memmap
[ 0.037819] DMA zone: 21 pages reserved
[ 0.037820] DMA zone: 3996 pages, LIFO batch:0
[ 0.037863] DMA32 zone: 14207 pages used for memmap
[ 0.037863] DMA32 zone: 909192 pages, LIFO batch:63
[ 0.047364] Normal zone: 18368 pages used for memmap
[ 0.047365] Normal zone: 1175552 pages, LIFO batch:63
[ 0.059119] ACPI: PM-Timer IO Port: 0x408
[ 0.059122] ACPI: Local APIC address 0xfee00000
[ 0.059128] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.059139] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.059140] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.059142] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.059143] ACPI: IRQ0 used by override.
[ 0.059143] ACPI: IRQ9 used by override.
[ 0.059145] Using ACPI (MADT) for SMP configuration information
[ 0.059146] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.059150] TSC deadline timer available
[ 0.059151] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.059166] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.059167] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.059168] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.059168] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.059168] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.059170] PM: Registered nosave memory: [mem 0xdeb90000-0xdf13ffff]
[ 0.059170] PM: Registered nosave memory: [mem 0xdf140000-0xdf391fff]
[ 0.059170] PM: Registered nosave memory: [mem 0xdf392000-0xdf39ffff]
[ 0.059171] PM: Registered nosave memory: [mem 0xdf3a0000-0xdf3bffff]
[ 0.059171] PM: Registered nosave memory: [mem 0xdf3c0000-0xdf3c4fff]
[ 0.059172] PM: Registered nosave memory: [mem 0xdf3c5000-0xdf407fff]
[ 0.059173] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[ 0.059173] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.059174] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.059174] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.059175] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.059175] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.059176] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.059176] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.059176] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.059177] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.059177] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.059178] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.059179] [mem 0xdf800000-0xf7ffffff] available for PCI devices
[ 0.059180] Booting paravirtualized kernel on bare hardware
[ 0.059182] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.059187] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.059342] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[ 0.059346] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[ 0.059347] pcpu-alloc: [0] 0 1 2 3
[ 0.059370] Built 1 zonelists, mobility grouping on. Total pages: 2056080
[ 0.059371] Policy zone: Normal
[ 0.059372] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-48-generic root=UUID=5df46a55-f2d9-40d3-b822-ce465af071ab ro quiet splash vt.handoff=1
[ 0.059858] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.060062] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.060104] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.063394] Calgary: detecting Calgary via BIOS EBDA area
[ 0.063396] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.083209] Memory: 8071796K/8354960K available (14339K kernel code, 2379K rwdata, 4928K rodata, 2704K init, 5020K bss, 283164K reserved, 0K cma-reserved)
[ 0.083215] random: get_random_u64 called from __kmem_cache_create+0x41/0x550 with crng_init=0
[ 0.083321] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.083330] Kernel/User page tables isolation: enabled
[ 0.083343] ftrace: allocating 44229 entries in 173 pages
[ 0.097873] rcu: Hierarchical RCU implementation.
[ 0.097875] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.097875] Tasks RCU enabled.
[ 0.097876] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.097876] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.100217] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.100438] vt handoff: transparent VT on vt#1
[ 0.100444] Console: colour dummy device 80x25
[ 0.100448] printk: console [tty0] enabled
[ 0.100460] ACPI: Core revision 20190816
[ 0.100542] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.100555] APIC: Switch to symmetric I/O mode setup
[ 0.100947] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.120555] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2fb8e1fb3c1, max_idle_ns: 440795293697 ns
[ 0.120559] Calibrating delay loop (skipped), value calculated using timer frequency.. 6621.45 BogoMIPS (lpj=13242908)
[ 0.120560] pid_max: default: 32768 minimum: 301
[ 0.120584] LSM: Security Framework initializing
[ 0.120592] Yama: becoming mindful.
[ 0.120613] AppArmor: AppArmor initialized
[ 0.120648] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.120659] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.120670] *** VALIDATE tmpfs ***
[ 0.120788] *** VALIDATE proc ***
[ 0.120830] *** VALIDATE cgroup1 ***
[ 0.120831] *** VALIDATE cgroup2 ***
[ 0.120869] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.120879] process: using mwait in idle threads
[ 0.120881] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.120882] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.120884] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.120885] Spectre V2 : Mitigation: Full generic retpoline
[ 0.120886] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.120886] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.120887] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.120888] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.120890] MDS: Mitigation: Clear CPU buffers
[ 0.121012] Freeing SMP alternatives memory: 40K
[ 0.124623] smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.124703] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.124708] ... version: 3
[ 0.124709] ... bit width: 48
[ 0.124709] ... generic registers: 8
[ 0.124710] ... value mask: 0000ffffffffffff
[ 0.124710] ... max period: 00007fffffffffff
[ 0.124710] ... fixed-purpose events: 3
[ 0.124711] ... event mask: 00000007000000ff
[ 0.124740] rcu: Hierarchical SRCU implementation.
[ 0.125462] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.125506] smp: Bringing up secondary CPUs ...
[ 0.125588] x86: Booting SMP configuration:
[ 0.125589] .... node #0, CPUs: #1 #2 #3
[ 0.132611] smp: Brought up 1 node, 4 CPUs
[ 0.132611] smpboot: Max logical packages: 1
[ 0.132611] smpboot: Total of 4 processors activated (26485.81 BogoMIPS)
[ 0.134884] devtmpfs: initialized
[ 0.134884] x86/mm: Memory block size: 128MB
[ 0.134884] PM: Registering ACPI NVS region [mem 0xdf140000-0xdf391fff] (2433024 bytes)
[ 0.134884] PM: Registering ACPI NVS region [mem 0xdf3a0000-0xdf3bffff] (131072 bytes)
[ 0.134884] PM: Registering ACPI NVS region [mem 0xdf3c5000-0xdf407fff] (274432 bytes)
[ 0.134884] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.134884] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.134884] pinctrl core: initialized pinctrl subsystem
[ 0.134884] PM: RTC time: 12:57:27, date: 2020-09-26
[ 0.134884] NET: Registered protocol family 16
[ 0.134884] audit: initializing netlink subsys (disabled)
[ 0.134884] audit: type=2000 audit(1601125047.032:1): state=initialized audit_enabled=0 res=1
[ 0.134884] EISA bus registered
[ 0.134884] cpuidle: using governor ladder
[ 0.134884] cpuidle: using governor menu
[ 0.134884] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.134884] ACPI: bus type PCI registered
[ 0.134884] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.136612] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.136614] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.136621] PCI: Using configuration type 1 for base access
[ 0.136677] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.136911] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.137797] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.137797] ACPI: Added _OSI(Module Device)
[ 0.137797] ACPI: Added _OSI(Processor Device)
[ 0.137797] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.137797] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.137797] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.137797] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.137797] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.140557] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.145095] ACPI: Dynamic OEM Table Load:
[ 0.145100] ACPI: SSDT 0xFFFFA07115A7E000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.149263] ACPI: Dynamic OEM Table Load:
[ 0.149266] ACPI: SSDT 0xFFFFA0711518B000 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.149917] ACPI: Dynamic OEM Table Load:
[ 0.149919] ACPI: SSDT 0xFFFFA07115176600 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.151147] ACPI: EC: EC started
[ 0.151148] ACPI: EC: interrupt blocked
[ 0.151154] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.151156] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.151157] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 0.151157] ACPI: Interpreter enabled
[ 0.151177] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.151178] ACPI: Using IOAPIC for interrupt routing
[ 0.151204] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.151433] ACPI: Enabled 9 GPEs in block 00 to 3F
[ 0.159161] ACPI: Power Resource [FN00] (off)
[ 0.159241] ACPI: Power Resource [FN01] (off)
[ 0.159317] ACPI: Power Resource [FN02] (off)
[ 0.159392] ACPI: Power Resource [FN03] (off)
[ 0.159473] ACPI: Power Resource [FN04] (off)
[ 0.160126] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.160131] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.160222] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.160782] PCI host bridge to bus 0000:00
[ 0.160784] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.160785] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.160786] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.160786] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.160787] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.160788] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.160789] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.160790] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.160791] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.160791] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.160793] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.160800] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.160896] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.160928] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.161043] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.161067] pci 0000:00:16.0: reg 0x10: [mem 0xf742c000-0xf742c00f 64bit]
[ 0.161138] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.161228] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[ 0.161246] pci 0000:00:19.0: reg 0x10: [mem 0xf7400000-0xf741ffff]
[ 0.161254] pci 0000:00:19.0: reg 0x14: [mem 0xf7429000-0xf7429fff]
[ 0.161261] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 0.161318] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.161413] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.161434] pci 0000:00:1a.0: reg 0x10: [mem 0xf7428000-0xf74283ff]
[ 0.161515] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.161611] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.161631] pci 0000:00:1b.0: reg 0x10: [mem 0xf7420000-0xf7423fff 64bit]
[ 0.161705] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.161803] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.161893] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.161995] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.162086] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.162191] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.162282] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.162385] pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
[ 0.162476] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.162578] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.162599] pci 0000:00:1d.0: reg 0x10: [mem 0xf7427000-0xf74273ff]
[ 0.162680] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.162776] pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
[ 0.162964] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.162981] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 0.162987] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 0.162994] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 0.163001] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 0.163008] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.163014] pci 0000:00:1f.2: reg 0x24: [mem 0xf7426000-0xf74267ff]
[ 0.163053] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.163143] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.163160] pci 0000:00:1f.3: reg 0x10: [mem 0xf7425000-0xf74250ff 64bit]
[ 0.163179] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.163314] pci 0000:01:00.0: [10de:13c2] type 00 class 0x030000
[ 0.163331] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.163340] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.163349] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.163355] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.163361] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.163365] pci 0000:01:00.0: enabling Extended Tags
[ 0.163429] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[ 0.163462] pci 0000:01:00.1: [10de:0fbb] type 00 class 0x040300
[ 0.163475] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.163510] pci 0000:01:00.1: enabling Extended Tags
[ 0.163598] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.163600] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.163601] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.163604] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.163672] pci 0000:02:00.0: [10b5:8112] type 01 class 0x060400
[ 0.172588] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.172593] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.172667] pci_bus 0000:03: extended config space not accessible
[ 0.172704] pci 0000:03:04.0: [13f6:8788] type 00 class 0x040100
[ 0.172736] pci 0000:03:04.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.172891] pci 0000:03:04.0: supports D1 D2
[ 0.172989] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.172995] pci 0000:02:00.0: bridge window [io 0xd000-0xdfff]
[ 0.173081] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.173121] pci 0000:04:00.0: reg 0x10: [mem 0xf7300000-0xf7301fff 64bit]
[ 0.173276] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.173399] pci 0000:00:1c.1: PCI bridge to [bus 04]
[ 0.173404] pci 0000:00:1c.1: bridge window [mem 0xf7300000-0xf73fffff]
[ 0.173474] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.173514] pci 0000:05:00.0: reg 0x10: [mem 0xf7200000-0xf7201fff 64bit]
[ 0.173669] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.173789] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.173794] pci 0000:00:1c.4: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.173858] pci 0000:06:00.0: [1b21:1080] type 01 class 0x060401
[ 0.174031] pci 0000:00:1c.6: PCI bridge to [bus 06-07] (subtractive decode)
[ 0.174034] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 0.174037] pci 0000:00:1c.6: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.174043] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.174044] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.174044] pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.174045] pci 0000:00:1c.6: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.174046] pci 0000:00:1c.6: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.174047] pci 0000:00:1c.6: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.174049] pci 0000:00:1c.6: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.174050] pci 0000:00:1c.6: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.174051] pci 0000:00:1c.6: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.174052] pci 0000:00:1c.6: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[ 0.174084] pci_bus 0000:07: extended config space not accessible
[ 0.174111] pci 0000:07:01.0: [1106:3044] type 00 class 0x0c0010
[ 0.174142] pci 0000:07:01.0: reg 0x10: [mem 0xf7100000-0xf71007ff]
[ 0.174159] pci 0000:07:01.0: reg 0x14: [io 0xc000-0xc07f]
[ 0.174291] pci 0000:07:01.0: supports D2
[ 0.174292] pci 0000:07:01.0: PME# supported from D2 D3hot D3cold
[ 0.174403] pci 0000:06:00.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.174412] pci 0000:06:00.0: bridge window [io 0xc000-0xcfff]
[ 0.174417] pci 0000:06:00.0: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.174426] pci 0000:06:00.0: bridge window [io 0xc000-0xcfff] (subtractive decode)
[ 0.174427] pci 0000:06:00.0: bridge window [mem 0xf7100000-0xf71fffff] (subtractive decode)
[ 0.174428] pci 0000:06:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.174429] pci 0000:06:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.174430] pci 0000:06:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.174431] pci 0000:06:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.174431] pci 0000:06:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.174432] pci 0000:06:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.174433] pci 0000:06:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.174434] pci 0000:06:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.174435] pci 0000:06:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.174436] pci 0000:06:00.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[ 0.175074] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.175140] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.175204] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.175268] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.175332] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.175396] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.175460] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.175525] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.175804] ACPI: EC: interrupt unblocked
[ 0.175811] ACPI: EC: event unblocked
[ 0.175817] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.175818] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[ 0.175881] iommu: Default domain type: Translated
[ 0.175881] SCSI subsystem initialized
[ 0.175881] libata version 3.00 loaded.
[ 0.175881] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.175881] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.175881] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.175881] vgaarb: loaded
[ 0.175881] ACPI: bus type USB registered
[ 0.175881] usbcore: registered new interface driver usbfs
[ 0.175881] usbcore: registered new interface driver hub
[ 0.175881] usbcore: registered new device driver usb
[ 0.175881] pps_core: LinuxPPS API ver. 1 registered
[ 0.175881] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.175881] PTP clock support registered
[ 0.175881] EDAC MC: Ver: 3.0.0
[ 0.175881] PCI: Using ACPI for IRQ routing
[ 0.177757] PCI: pci_cache_line_size set to 64 bytes
[ 0.177819] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.177820] e820: reserve RAM buffer [mem 0xdeb90000-0xdfffffff]
[ 0.177821] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 0.177822] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.177903] NetLabel: Initializing
[ 0.177904] NetLabel: domain hash size = 128
[ 0.177904] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.177916] NetLabel: unlabeled traffic allowed by default
[ 0.177929] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.177929] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.177929] clocksource: Switched to clocksource tsc-early
[ 0.187072] *** VALIDATE bpf ***
[ 0.187148] VFS: Disk quotas dquot_6.6.0
[ 0.187162] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.187183] *** VALIDATE ramfs ***
[ 0.187186] *** VALIDATE hugetlbfs ***
[ 0.187254] AppArmor: AppArmor Filesystem Enabled
[ 0.187280] pnp: PnP ACPI init
[ 0.187389] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.187394] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.187478] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.187479] system 00:01: [io 0x0200-0x020f] has been reserved
[ 0.187480] system 00:01: [io 0xffff] has been reserved
[ 0.187481] system 00:01: [io 0xffff] has been reserved
[ 0.187482] system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.187483] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.187484] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.187485] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.187488] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187509] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.187558] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.187562] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.187660] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.187663] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187716] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.187719] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187984] pnp 00:06: [dma 0 disabled]
[ 0.188021] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.188264] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.188265] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.188266] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.188267] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.188268] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.188270] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.188271] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.188272] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.188273] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.188274] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.188275] system 00:07: [mem 0xf2000000-0xf2000fff] has been reserved
[ 0.188279] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.188426] pnp: PnP ACPI: found 8 devices
[ 0.189496] thermal_sys: Registered thermal governor 'fair_share'
[ 0.189497] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.189498] thermal_sys: Registered thermal governor 'step_wise'
[ 0.189498] thermal_sys: Registered thermal governor 'user_space'
[ 0.189499] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.193991] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.194025] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.194027] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.194029] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.194030] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.194033] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.194036] pci 0000:02:00.0: bridge window [io 0xd000-0xdfff]
[ 0.194058] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.194060] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.194071] pci 0000:00:1c.1: PCI bridge to [bus 04]
[ 0.194075] pci 0000:00:1c.1: bridge window [mem 0xf7300000-0xf73fffff]
[ 0.194082] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.194086] pci 0000:00:1c.4: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.194094] pci 0000:06:00.0: PCI bridge to [bus 07]
[ 0.194097] pci 0000:06:00.0: bridge window [io 0xc000-0xcfff]
[ 0.194104] pci 0000:06:00.0: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.194117] pci 0000:00:1c.6: PCI bridge to [bus 06-07]
[ 0.194119] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 0.194124] pci 0000:00:1c.6: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.194132] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.194132] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.194133] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.194134] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.194135] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.194136] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.194137] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.194138] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.194138] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.194139] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
[ 0.194140] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.194141] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.194142] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.194143] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.194144] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.194145] pci_bus 0000:04: resource 1 [mem 0xf7300000-0xf73fffff]
[ 0.194146] pci_bus 0000:05: resource 1 [mem 0xf7200000-0xf72fffff]
[ 0.194146] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
[ 0.194147] pci_bus 0000:06: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.194148] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window]
[ 0.194149] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window]
[ 0.194150] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.194151] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.194151] pci_bus 0000:06: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.194152] pci_bus 0000:06: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.194153] pci_bus 0000:06: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.194154] pci_bus 0000:06: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.194155] pci_bus 0000:06: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.194156] pci_bus 0000:06: resource 13 [mem 0xe0000000-0xfeafffff window]
[ 0.194156] pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
[ 0.194157] pci_bus 0000:07: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.194158] pci_bus 0000:07: resource 4 [io 0xc000-0xcfff]
[ 0.194159] pci_bus 0000:07: resource 5 [mem 0xf7100000-0xf71fffff]
[ 0.194160] pci_bus 0000:07: resource 6 [io 0x0000-0x0cf7 window]
[ 0.194161] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window]
[ 0.194161] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.194162] pci_bus 0000:07: resource 9 [mem 0x000d0000-0x000d3fff window]
[ 0.194163] pci_bus 0000:07: resource 10 [mem 0x000d4000-0x000d7fff window]
[ 0.194164] pci_bus 0000:07: resource 11 [mem 0x000d8000-0x000dbfff window]
[ 0.194165] pci_bus 0000:07: resource 12 [mem 0x000dc000-0x000dffff window]
[ 0.194166] pci_bus 0000:07: resource 13 [mem 0x000e0000-0x000e3fff window]
[ 0.194166] pci_bus 0000:07: resource 14 [mem 0x000e4000-0x000e7fff window]
[ 0.194167] pci_bus 0000:07: resource 15 [mem 0xe0000000-0xfeafffff window]
[ 0.194267] NET: Registered protocol family 2
[ 0.194400] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.194444] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.194577] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.194656] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.194685] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.194708] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.194749] NET: Registered protocol family 1
[ 0.194754] NET: Registered protocol family 44
[ 0.324686] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6b0 took 126870 usecs
[ 0.456678] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6b0 took 128880 usecs
[ 0.456697] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.456706] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.457039] pci 0000:06:00.0: Disabling ASPM L0s/L1
[ 0.457047] PCI: CLS 64 bytes, default 64
[ 0.457085] Trying to unpack rootfs image as initramfs...
[ 0.882296] Freeing initrd memory: 39872K
[ 0.882323] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.882324] software IO TLB: mapped [mem 0xdab90000-0xdeb90000] (64MB)
[ 0.882521] check: Scanning for low memory corruption every 60 seconds
[ 0.882871] Initialise system trusted keyrings
[ 0.882878] Key type blacklist registered
[ 0.882899] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.883966] zbud: loaded
[ 0.884255] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.884373] fuse: init (API version 7.31)
[ 0.884385] *** VALIDATE fuse ***
[ 0.884386] *** VALIDATE fuse ***
[ 0.884458] Platform Keyring initialized
[ 0.887620] Key type asymmetric registered
[ 0.887621] Asymmetric key parser 'x509' registered
[ 0.887627] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.887657] io scheduler mq-deadline registered
[ 0.888348] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.888387] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.888387] vesafb: scrolling: redraw
[ 0.888388] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.888396] vesafb: framebuffer at 0xf1000000, mapped to 0x(____ptrval____), using 1216k, total 1216k
[ 0.888422] fbcon: Deferring console take-over
[ 0.888423] fb0: VESA VGA frame buffer device
[ 0.888432] intel_idle: MWAIT substates: 0x1120
[ 0.888433] intel_idle: v0.4.1 model 0x2A
[ 0.888544] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.888641] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.888670] ACPI: Power Button [PWRB]
[ 0.888700] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.888718] ACPI: Power Button [PWRF]
[ 0.889369] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.889370] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.889640] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.889641] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.889743] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.910262] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.911746] Linux agpgart interface v0.103
[ 0.913420] loop: module loaded
[ 0.913574] libphy: Fixed MDIO Bus: probed
[ 0.913575] tun: Universal TUN/TAP device driver, 1.6
[ 0.913595] PPP generic driver version 2.4.2
[ 0.913634] VFIO - User Level meta-driver version: 0.3
[ 0.913715] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.913717] ehci-pci: EHCI PCI platform driver
[ 0.913828] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.913833] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.913844] ehci-pci 0000:00:1a.0: debug port 2
[ 0.917747] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.917758] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7428000
[ 0.932611] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.932677] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.932678] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.932679] usb usb1: Product: EHCI Host Controller
[ 0.932680] usb usb1: Manufacturer: Linux 5.4.0-48-generic ehci_hcd
[ 0.932681] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.932825] hub 1-0:1.0: USB hub found
[ 0.932832] hub 1-0:1.0: 2 ports detected
[ 0.933054] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.933058] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.933067] ehci-pci 0000:00:1d.0: debug port 2
[ 0.936974] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.936982] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7427000
[ 0.952609] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.952668] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.952669] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.952670] usb usb2: Product: EHCI Host Controller
[ 0.952671] usb usb2: Manufacturer: Linux 5.4.0-48-generic ehci_hcd
[ 0.952672] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.952810] hub 2-0:1.0: USB hub found
[ 0.952816] hub 2-0:1.0: 2 ports detected
[ 0.952946] ehci-platform: EHCI generic platform driver
[ 0.952954] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.952957] ohci-pci: OHCI PCI platform driver
[ 0.952964] ohci-platform: OHCI generic platform driver
[ 0.952969] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.953044] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 0.953048] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[ 0.953168] xhci_hcd 0000:04:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[ 0.953368] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.953369] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.953370] usb usb3: Product: xHCI Host Controller
[ 0.953371] usb usb3: Manufacturer: Linux 5.4.0-48-generic xhci-hcd
[ 0.953372] usb usb3: SerialNumber: 0000:04:00.0
[ 0.953501] hub 3-0:1.0: USB hub found
[ 0.953511] hub 3-0:1.0: 2 ports detected
[ 0.953612] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 0.953615] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[ 0.953617] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed
[ 0.956529] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.956547] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.956548] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.956548] usb usb4: Product: xHCI Host Controller
[ 0.956549] usb usb4: Manufacturer: Linux 5.4.0-48-generic xhci-hcd
[ 0.956550] usb usb4: SerialNumber: 0000:04:00.0
[ 0.956660] hub 4-0:1.0: USB hub found
[ 0.956673] hub 4-0:1.0: 2 ports detected
[ 0.956831] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 0.956835] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
[ 0.956954] xhci_hcd 0000:05:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[ 0.957153] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.957154] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.957155] usb usb5: Product: xHCI Host Controller
[ 0.957156] usb usb5: Manufacturer: Linux 5.4.0-48-generic xhci-hcd
[ 0.957156] usb usb5: SerialNumber: 0000:05:00.0
[ 0.957284] hub 5-0:1.0: USB hub found
[ 0.957295] hub 5-0:1.0: 2 ports detected
[ 0.957399] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 0.957401] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
[ 0.957403] xhci_hcd 0000:05:00.0: Host supports USB 3.0 SuperSpeed
[ 0.960317] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.960333] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.960334] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.960335] usb usb6: Product: xHCI Host Controller
[ 0.960336] usb usb6: Manufacturer: Linux 5.4.0-48-generic xhci-hcd
[ 0.960337] usb usb6: SerialNumber: 0000:05:00.0
[ 0.960429] hub 6-0:1.0: USB hub found
[ 0.960440] hub 6-0:1.0: 2 ports detected
[ 0.960546] i8042: PNP: No PS/2 controller found.
[ 0.960547] i8042: Probing ports directly.
[ 0.963318] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.963323] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.963506] mousedev: PS/2 mouse device common for all mice
[ 0.963688] rtc_cmos 00:02: RTC can wake from S4
[ 0.963879] rtc_cmos 00:02: registered as rtc0
[ 0.963890] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.963896] i2c /dev entries driver
[ 0.963927] device-mapper: uevent: version 1.0.3
[ 0.963984] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 0.963997] platform eisa.0: Probing EISA bus 0
[ 0.964001] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.964002] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.964003] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.964004] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.964004] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.964005] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.964006] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.964007] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.964008] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.964008] platform eisa.0: EISA: Detected 0 cards
[ 0.964012] intel_pstate: Intel P-state driver initializing
[ 0.964270] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.964323] drop_monitor: Initializing network drop monitor service
[ 0.964449] NET: Registered protocol family 10
[ 0.968016] Segment Routing with IPv6
[ 0.968032] NET: Registered protocol family 17
[ 0.968060] Key type dns_resolver registered
[ 0.968239] RAS: Correctable Errors collector initialized.
[ 0.968266] microcode: sig=0x206a7, pf=0x2, revision=0x2f
[ 0.968294] microcode: Microcode Update Driver: v2.2.
[ 0.968297] IPI shorthand broadcast: enabled
[ 0.968302] sched_clock: Marking stable (968134926, 156624)->(1064156115, -95864565)
[ 0.968350] registered taskstats version 1
[ 0.968357] Loading compiled-in X.509 certificates
[ 0.969088] Loaded X.509 cert 'Build time autogenerated kernel key: 59a6f4fdc5599d4ba313e816491c745e50e7fa8e'
[ 0.969110] zswap: loaded using pool lzo/zbud
[ 0.969229] Key type ._fscrypt registered
[ 0.969229] Key type .fscrypt registered
[ 0.972398] Key type big_key registered
[ 0.973931] Key type encrypted registered
[ 0.973934] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.973938] ima: No TPM chip found, activating TPM-bypass!
[ 0.973942] ima: Allocated hash algorithm: sha1
[ 0.973955] ima: No architecture policies found
[ 0.973961] evm: Initialising EVM extended attributes:
[ 0.973961] evm: security.selinux
[ 0.973962] evm: security.SMACK64
[ 0.973962] evm: security.SMACK64EXEC
[ 0.973962] evm: security.SMACK64TRANSMUTE
[ 0.973963] evm: security.SMACK64MMAP
[ 0.973963] evm: security.apparmor
[ 0.973963] evm: security.ima
[ 0.973964] evm: security.capability
[ 0.973964] evm: HMAC attrs: 0x1
[ 0.974256] PM: Magic number: 4:687:987
[ 0.974259] machinecheck machinecheck0: hash matches
[ 0.974389] rtc_cmos 00:02: setting system clock to 2020-09-26T12:57:28 UTC (1601125048)
[ 0.975496] Freeing unused decrypted memory: 2040K
[ 0.975839] Freeing unused kernel image memory: 2704K
[ 0.996621] Write protecting the kernel read-only data: 22528k
[ 0.997093] Freeing unused kernel image memory: 2008K
[ 0.997297] Freeing unused kernel image memory: 1216K
[ 1.006552] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.006553] x86/mm: Checking user space page tables
[ 1.014749] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.014751] Run /init as init process
[ 1.093522] ahci 0000:00:1f.2: version 3.0
[ 1.094405] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.094406] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.094545] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.104722] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.104724] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 1.165291] scsi host0: ahci
[ 1.165560] scsi host1: ahci
[ 1.165723] scsi host2: ahci
[ 1.174659] scsi host3: ahci
[ 1.174956] scsi host4: ahci
[ 1.175162] scsi host5: ahci
[ 1.175204] ata1: SATA max UDMA/133 abar m2048@0xf7426000 port 0xf7426100 irq 39
[ 1.175206] ata2: SATA max UDMA/133 abar m2048@0xf7426000 port 0xf7426180 irq 39
[ 1.175207] ata3: SATA max UDMA/133 abar m2048@0xf7426000 port 0xf7426200 irq 39
[ 1.175209] ata4: SATA max UDMA/133 abar m2048@0xf7426000 port 0xf7426280 irq 39
[ 1.175211] ata5: SATA max UDMA/133 abar m2048@0xf7426000 port 0xf7426300 irq 39
[ 1.175213] ata6: SATA max UDMA/133 abar m2048@0xf7426000 port 0xf7426380 irq 39
[ 1.180614] firewire_ohci 0000:07:01.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.219002] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.268568] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.288570] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.329138] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) bc:ae:c5:76:0b:ad
[ 1.329139] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.329196] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 1.330088] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 1.388978] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.388981] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.389039] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.389040] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.389264] hub 1-1:1.0: USB hub found
[ 1.389351] hub 2-1:1.0: USB hub found
[ 1.389357] hub 1-1:1.0: 6 ports detected
[ 1.389428] hub 2-1:1.0: 8 ports detected
[ 1.467134] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.467854] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.467862] No Local Variables are initialized for Method [_GTF]
[ 1.467862] No Arguments are initialized for method [_GTF]
[ 1.467864] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
[ 1.468216] ata2.00: NCQ Send/Recv Log not supported
[ 1.468217] ata2.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133
[ 1.468218] ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.468630] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.468636] No Local Variables are initialized for Method [_GTF]
[ 1.468637] No Arguments are initialized for method [_GTF]
[ 1.468638] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
[ 1.468914] ata2.00: NCQ Send/Recv Log not supported
[ 1.468920] ata2.00: configured for UDMA/133
[ 1.471237] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.471257] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.471279] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.471302] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.471334] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.471512] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.471525] No Local Variables are initialized for Method [_GTF]
[ 1.471527] No Arguments are initialized for method [_GTF]
[ 1.471530] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT0._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
[ 1.471666] ata1.00: supports DRM functions and may not be fully accessible
[ 1.471888] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.471895] No Local Variables are initialized for Method [_GTF]
[ 1.471896] No Arguments are initialized for method [_GTF]
[ 1.471898] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
[ 1.471905] ata6.00: ATAPI: TSSTcorp CDDVDW SH-S223Q, SB03, max UDMA/100
[ 1.471940] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.471947] No Local Variables are initialized for Method [_GTF]
[ 1.471947] No Arguments are initialized for method [_GTF]
[ 1.471949] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT3._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
[ 1.472115] ata4.00: HPA detected: current 625140335, native 625142448
[ 1.472323] ata4.00: ATA-8: Hitachi HDP725032GLA360, GM3OA52A, max UDMA/133
[ 1.472326] ata4.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.472587] ata1.00: disabling queued TRIM support
[ 1.472589] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133
[ 1.472590] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.472780] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.472801] No Local Variables are initialized for Method [_GTF]
[ 1.472802] No Arguments are initialized for method [_GTF]
[ 1.472803] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
[ 1.472811] ata6.00: configured for UDMA/100
[ 1.472864] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.472871] No Local Variables are initialized for Method [_GTF]
[ 1.472872] No Arguments are initialized for method [_GTF]
[ 1.472873] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
[ 1.473109] ata5.00: ATA-8: WDC WD10EALS-00Z8A0, 05.01D05, max UDMA/133
[ 1.473112] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.473251] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.473257] No Local Variables are initialized for Method [_GTF]
[ 1.473258] No Arguments are initialized for method [_GTF]
[ 1.473260] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT3._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
[ 1.473592] ata4.00: configured for UDMA/133
[ 1.474139] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.474154] No Local Variables are initialized for Method [_GTF]
[ 1.474163] No Arguments are initialized for method [_GTF]
[ 1.474164] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT0._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
[ 1.474207] ata1.00: supports DRM functions and may not be fully accessible
[ 1.474734] ata1.00: disabling queued TRIM support
[ 1.474824] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.474841] No Local Variables are initialized for Method [_GTF]
[ 1.474842] No Arguments are initialized for method [_GTF]
[ 1.474843] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
[ 1.475076] ata5.00: configured for UDMA/133
[ 1.476012] ata1.00: configured for UDMA/133
[ 1.476235] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
[ 1.476364] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.476465] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.476479] sd 0:0:0:0: [sda] Write Protect is off
[ 1.476481] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.476490] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.476517] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 6B0Q PQ: 0 ANSI: 5
[ 1.476692] firewire_core 0000:07:01.0: created device fw0: GUID 001e8c00003f84b2, S400
[ 1.476693] ata2.00: Enabling discard_zeroes_data
[ 1.476718] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.476792] sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.476805] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.476806] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.476857] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.482370] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.482376] No Local Variables are initialized for Method [_GTF]
[ 1.482377] No Arguments are initialized for method [_GTF]
[ 1.482378] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT2._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
[ 1.483215] ata3.00: ATA-8: OCZ-VERTEX3 MI, 2.22, max UDMA/133
[ 1.483217] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.489067] sda: sda1
[ 1.490191] sd 0:0:0:0: [sda] supports TCG Opal
[ 1.490192] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.492392] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.492399] No Local Variables are initialized for Method [_GTF]
[ 1.492400] No Arguments are initialized for method [_GTF]
[ 1.492402] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT2._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
[ 1.493177] ata3.00: configured for UDMA/133
[ 1.493338] scsi 2:0:0:0: Direct-Access ATA OCZ-VERTEX3 MI 2.22 PQ: 0 ANSI: 5
[ 1.493570] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.493634] sd 2:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 1.493642] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.493643] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.493651] scsi 3:0:0:0: Direct-Access ATA Hitachi HDP72503 A52A PQ: 0 ANSI: 5
[ 1.493655] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.493844] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.493860] sd 3:0:0:0: [sdd] 625140335 512-byte logical blocks: (320 GB/298 GiB)
[ 1.493889] sd 3:0:0:0: [sdd] Write Protect is off
[ 1.493890] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.493906] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.493946] scsi 4:0:0:0: Direct-Access ATA WDC WD10EALS-00Z 1D05 PQ: 0 ANSI: 5
[ 1.494035] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 1.494052] sd 4:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.494058] sd 4:0:0:0: [sde] Write Protect is off
[ 1.494059] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 1.494068] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.494570] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223Q SB03 PQ: 0 ANSI: 5
[ 1.516742] ata2.00: Enabling discard_zeroes_data
[ 1.517069] sdb: sdb1 sdb2 sdb4
[ 1.517188] sdc: sdc1 < sdc5 >
[ 1.517521] ata2.00: Enabling discard_zeroes_data
[ 1.517649] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.517659] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.538083] sdd: sdd1
[ 1.538589] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 1.558755] sde: sde1 sde2 sde3 < sde5 >
[ 1.559070] sd 4:0:0:0: [sde] Attached SCSI disk
[ 1.576042] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.576043] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.588874] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 1.589000] sr 5:0:0:0: Attached scsi generic sg5 type 5
[ 1.610496] random: fast init done
[ 1.611008] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.611479] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.611513] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.668599] tsc: Refined TSC clocksource calibration: 3310.800 MHz
[ 1.668606] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fb9265f317, max_idle_ns: 440795256718 ns
[ 1.668685] clocksource: Switched to clocksource tsc
[ 1.676613] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[ 1.789806] usb 2-1.1: New USB device found, idVendor=2357, idProduct=0109, bcdDevice= 2.00
[ 1.789808] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.789809] usb 2-1.1: Product: 802.11n NIC
[ 1.789810] usb 2-1.1: Manufacturer: Realtek
[ 1.789810] usb 2-1.1: SerialNumber: 00e04c000001
[ 1.868588] usb 2-1.3: new full-speed USB device number 4 using ehci-pci
[ 2.000474] usb 2-1.3: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=52.76
[ 2.000476] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.080602] usb 2-1.4: new high-speed USB device number 5 using ehci-pci
[ 2.156675] fbcon: Taking over console
[ 2.156753] Console: switching to colour frame buffer device 80x30
[ 2.299447] usb 2-1.4: New USB device found, idVendor=046d, idProduct=080c, bcdDevice= 0.09
[ 2.299448] usb 2-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.380593] usb 2-1.7: new full-speed USB device number 6 using ehci-pci
[ 2.492631] usb 2-1.7: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10
[ 2.492634] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.492636] usb 2-1.7: Product: USB Receiver
[ 2.492638] usb 2-1.7: Manufacturer: Logitech
[ 2.496586] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.502814] usbcore: registered new interface driver usbhid
[ 2.502815] usbhid: USB HID core driver
[ 2.505156] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/0003:046D:C52B.0001/input/input5
[ 2.506061] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.564812] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.7/input0
[ 2.564987] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/0003:046D:C52B.0002/input/input6
[ 2.565197] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/0003:046D:C52B.0002/input/input7
[ 2.572589] usb 2-1.8: new full-speed USB device number 7 using ehci-pci
[ 2.624747] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/0003:046D:C52B.0002/input/input8
[ 2.624926] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.7/input1
[ 2.625090] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7/input2
[ 2.684804] usb 2-1.8: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10
[ 2.684805] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.684806] usb 2-1.8: Product: USB Receiver
[ 2.684807] usb 2-1.8: Manufacturer: Logitech
[ 2.691057] logitech-djreceiver 0003:046D:C52B.0006: hiddev2,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.8/input2
[ 2.785306] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7/input2
[ 2.810395] input: Logitech Unifying Device. Wireless PID:2010 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.2/0003:046D:C52B.0006/0003:046D:2010.0007/input/input10
[ 2.810510] input: Logitech Unifying Device. Wireless PID:2010 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.2/0003:046D:C52B.0006/0003:046D:2010.0007/input/input11
[ 2.810615] input: Logitech Unifying Device. Wireless PID:2010 System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.2/0003:046D:C52B.0006/0003:046D:2010.0007/input/input12
[ 2.810790] hid-generic 0003:046D:2010.0007: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2010] on usb-0000:00:1d.0-1.8/input2:1
[ 2.812333] input: Logitech Unifying Device. Wireless PID:101a Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.2/0003:046D:C52B.0006/0003:046D:101A.0008/input/input16
[ 2.812445] hid-generic 0003:046D:101A.0008: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:1d.0-1.8/input2:2
[ 2.814189] input: Logitech Unifying Device. Wireless PID:1017 Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.2/0003:046D:C52B.0006/0003:046D:1017.0009/input/input20
[ 2.814405] hid-generic 0003:046D:1017.0009: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1017] on usb-0000:00:1d.0-1.8/input2:3
[ 2.907323] input: Logitech Unifying Device. Wireless PID:406e Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.2/0003:046D:C52B.0003/0003:046D:406E.000A/input/input24
[ 2.907429] input: Logitech Unifying Device. Wireless PID:406e Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.2/0003:046D:C52B.0003/0003:046D:406E.000A/input/input25
[ 2.907526] input: Logitech Unifying Device. Wireless PID:406e System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.2/0003:046D:C52B.0003/0003:046D:406E.000A/input/input26
[ 2.907577] hid-generic 0003:046D:406E.000A: input,hidraw5: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:406e] on usb-0000:00:1d.0-1.7/input2:1
[ 2.997829] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 3.016763] systemd[1]: Detected architecture x86-64.
[ 3.037847] systemd[1]: Set hostname to <xxx>.
[ 3.119324] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.119486] systemd[1]: Created slice System Slice.
[ 3.119541] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.119608] systemd[1]: Listening on Journal Socket.
[ 3.120123] systemd[1]: Mounting Huge Pages File System...
[ 3.120963] systemd[1]: Starting Load Kernel Modules...
[ 3.121533] systemd[1]: Starting Set the console keyboard layout...
[ 3.129542] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 3.177318] lp: driver loaded but no devices found
[ 3.193565] ppdev: user-space parallel port driver
[ 3.216593] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
[ 3.283352] systemd-journald[298]: Received request to flush runtime journal from PID 1
[ 3.303263] systemd-journald[298]: File /var/log/journal/a1fc8e299bcf4194b3bc1e8be940df4c/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 3.386774] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190816/utaddress-213)
[ 3.386778] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.386781] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20190816/utaddress-213)
[ 3.386784] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-213)
[ 3.386786] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.386786] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20190816/utaddress-213)
[ 3.386788] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-213)
[ 3.386790] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.386791] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20190816/utaddress-213)
[ 3.386793] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-213)
[ 3.386795] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.386795] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.432827] mc: Linux media interface: v0.10
[ 3.440456] Bluetooth: Core ver 2.22
[ 3.440467] NET: Registered protocol family 31
[ 3.440468] Bluetooth: HCI device and connection manager initialized
[ 3.440471] Bluetooth: HCI socket layer initialized
[ 3.440473] Bluetooth: L2CAP socket layer initialized
[ 3.440475] Bluetooth: SCO socket layer initialized
[ 3.446155] videodev: Linux video capture interface: v2.00
[ 3.451826] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.452112] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.513012] usbcore: registered new interface driver btusb
[ 3.514058] Bluetooth: hci0: unexpected event for opcode 0x0000
[ 3.555167] nvidia: loading out-of-tree module taints kernel.
[ 3.555176] nvidia: module license 'NVIDIA' taints kernel.
[ 3.555176] Disabling lock debugging due to kernel taint
[ 3.557994] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 3.557999] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 3.568193] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 3.596669] input: Logitech K800 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.2/0003:046D:C52B.0006/0003:046D:2010.0007/input/input30
[ 3.596728] logitech-hidpp-device 0003:046D:2010.0007: input,hidraw2: USB HID v1.11 Keyboard [Logitech K800] on usb-0000:00:1d.0-1.8/input2:1
[ 3.607102] nvidia-nvlink: Nvlink Core is being initialized, major device number 237
[ 3.612857] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 3.701296] usb 2-1.4: Warning! Unlikely big volume range (=6144), cval->res is probably wrong.
[ 3.701298] usb 2-1.4: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1
[ 3.701425] usbcore: registered new interface driver snd-usb-audio
[ 3.701434] uvcvideo: Found UVC 1.00 device <unnamed> (046d:080c)
[ 3.712925] random: crng init done
[ 3.712927] random: 7 urandom warning(s) missed due to ratelimiting
[ 3.713712] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 450.51.06 Sun Jul 19 20:02:54 UTC 2020
[ 3.719988] input: Logitech Performance MX as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.2/0003:046D:C52B.0006/0003:046D:101A.0008/input/input31
[ 3.720080] logitech-hidpp-device 0003:046D:101A.0008: input,hidraw3: USB HID v1.11 Mouse [Logitech Performance MX] on usb-0000:00:1d.0-1.8/input2:2
[ 3.730153] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 450.51.06 Sun Jul 19 20:06:42 UTC 2020
[ 3.735873] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 3.735874] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 3.739287] uvcvideo 2-1.4:1.0: Entity type for entity Extension 4 was not initialized!
[ 3.739289] uvcvideo 2-1.4:1.0: Entity type for entity Extension 6 was not initialized!
[ 3.739290] uvcvideo 2-1.4:1.0: Entity type for entity Extension 7 was not initialized!
[ 3.739292] uvcvideo 2-1.4:1.0: Entity type for entity Processing 2 was not initialized!
[ 3.739293] uvcvideo 2-1.4:1.0: Entity type for entity Extension 3 was not initialized!
[ 3.739294] uvcvideo 2-1.4:1.0: Entity type for entity Camera 1 was not initialized!
[ 3.739365] input: UVC Camera (046d:080c) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input32
[ 3.749672] usb 2-1.1: Vendor: Realtek
[ 3.749673] usb 2-1.1: Product: 802.11n NI
[ 3.749674] usb 2-1.1: Serial:
[ 3.749675] usb 2-1.1: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes):
[ 3.749676] usb 2-1.1: 00: 29 81 00 7c 01 40 03 00
[ 3.749677] usb 2-1.1: 08: 40 74 04 50 14 00 00 00
[ 3.749678] usb 2-1.1: 10: 26 26 26 27 27 27 29 29
[ 3.749679] usb 2-1.1: 18: 2a 2a 2a f2 ef ef ff ff
[ 3.749679] usb 2-1.1: 20: ff ff ff ff ff ff ff ff
[ 3.749680] usb 2-1.1: 28: ff ff ff ff ff ff ff ff
[ 3.749681] usb 2-1.1: 30: ff ff ff ff ff ff ff ff
[ 3.749682] usb 2-1.1: 38: ff ff 25 25 25 24 24 24
[ 3.749682] usb 2-1.1: 40: 28 28 27 27 27 f2 ef ef
[ 3.749683] usb 2-1.1: 48: ff ff ff ff ff ff ff ff
[ 3.749684] usb 2-1.1: 50: ff ff ff ff ff ff ff ff
[ 3.749685] usb 2-1.1: 58: ff ff ff ff ff ff ff ff
[ 3.749685] usb 2-1.1: 60: ff ff ff ff ff ff ff ff
[ 3.749686] usb 2-1.1: 68: ff ff ff ff ff ff ff ff
[ 3.749687] usb 2-1.1: 70: ff ff ff ff ff ff ff ff
[ 3.749688] usb 2-1.1: 78: ff ff ff ff ff ff ff ff
[ 3.749689] usb 2-1.1: 80: ff ff ff ff ff ff ff ff
[ 3.749689] usb 2-1.1: 88: ff ff ff ff ff ff ff ff
[ 3.749690] usb 2-1.1: 90: ff ff ff ff ff ff ff ff
[ 3.749691] usb 2-1.1: 98: ff ff ff ff ff ff ff ff
[ 3.749692] usb 2-1.1: a0: ff ff ff ff ff ff ff ff
[ 3.749692] usb 2-1.1: a8: ff ff ff ff ff ff ff ff
[ 3.749693] usb 2-1.1: b0: ff ff ff ff ff ff ff ff
[ 3.749694] usb 2-1.1: b8: a1 1b 20 00 00 00 ff ff
[ 3.749695] usb 2-1.1: c0: ff 01 00 10 00 00 00 ff
[ 3.749695] usb 2-1.1: c8: 00 00 ff ff ff ff ff ff
[ 3.749696] usb 2-1.1: d0: 57 23 09 01 e7 47 02 18
[ 3.749697] usb 2-1.1: d8: d6 c7 1f 55 47 0a 03 52
[ 3.749698] usb 2-1.1: e0: 65 61 6c 74 65 6b 20 0e
[ 3.749701] usb 2-1.1: e8: 03 38 30 32 2e 31 31 6e
[ 3.749702] usb 2-1.1: f0: 20 4e 49 43 20 00 00 ff
[ 3.749703] usb 2-1.1: f8: ff ff ff ff ff ff ff ff
[ 3.749704] usb 2-1.1: 100: ff ff ff ff ff ff ff ff
[ 3.749704] usb 2-1.1: 108: ff ff ff ff ff ff ff ff
[ 3.749705] usb 2-1.1: 110: ff ff ff ff ff ff ff 0d
[ 3.749706] usb 2-1.1: 118: 03 00 05 00 30 00 00 00
[ 3.749707] usb 2-1.1: 120: 00 93 ff ff ff ff ff ff
[ 3.749707] usb 2-1.1: 128: ff ff ff ff ff ff ff ff
[ 3.749708] usb 2-1.1: 130: f6 a8 98 2d 03 92 98 00
[ 3.749709] usb 2-1.1: 138: fc 8c 00 11 9b 44 02 0a
[ 3.749710] usb 2-1.1: 140: ff ff ff ff ff ff ff ff
[ 3.749710] usb 2-1.1: 148: ff ff ff ff ff ff ff ff
[ 3.749711] usb 2-1.1: 150: ff ff ff ff ff ff ff ff
[ 3.749712] usb 2-1.1: 158: ff ff ff ff ff ff ff ff
[ 3.749713] usb 2-1.1: 160: ff ff ff ff ff ff ff ff
[ 3.749713] usb 2-1.1: 168: ff ff ff ff ff ff ff ff
[ 3.749714] usb 2-1.1: 170: ff ff ff ff ff ff ff ff
[ 3.749715] usb 2-1.1: 178: ff ff ff ff ff ff ff ff
[ 3.749716] usb 2-1.1: 180: ff ff ff ff ff ff ff ff
[ 3.749717] usb 2-1.1: 188: ff ff ff ff ff ff ff ff
[ 3.749717] usb 2-1.1: 190: ff ff ff ff ff ff ff ff
[ 3.749718] usb 2-1.1: 198: ff ff ff ff ff ff ff ff
[ 3.749719] usb 2-1.1: 1a0: ff ff ff ff ff ff ff ff
[ 3.749720] usb 2-1.1: 1a8: ff ff ff ff ff ff ff ff
[ 3.749720] usb 2-1.1: 1b0: ff ff ff ff ff ff ff ff
[ 3.749721] usb 2-1.1: 1b8: ff ff ff ff ff ff ff ff
[ 3.749722] usb 2-1.1: 1c0: ff ff ff ff ff ff ff ff
[ 3.749723] usb 2-1.1: 1c8: ff ff ff ff ff ff ff ff
[ 3.749723] usb 2-1.1: 1d0: ff ff ff ff ff ff ff ff
[ 3.749724] usb 2-1.1: 1d8: ff ff ff ff ff ff ff ff
[ 3.749725] usb 2-1.1: 1e0: ff ff ff ff ff ff ff ff
[ 3.749726] usb 2-1.1: 1e8: ff ff ff ff ff ff ff ff
[ 3.749726] usb 2-1.1: 1f0: ff ff ff ff ff ff ff ff
[ 3.749727] usb 2-1.1: 1f8: ff ff ff ff ff ff ff ff
[ 3.749729] usb 2-1.1: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0
[ 3.749730] usb 2-1.1: RTL8192EU MAC: 18:d6:c7:1f:55:47
[ 3.749731] usb 2-1.1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
[ 3.764659] usb 2-1.1: Firmware revision 19.0 (signature 0x92e1)
[ 3.780824] usbcore: registered new interface driver uvcvideo
[ 3.780825] USB Video Class driver (1.1.1)
[ 3.787972] input: Logitech Anywhere MX as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.2/0003:046D:C52B.0006/0003:046D:1017.0009/input/input33
[ 3.788064] logitech-hidpp-device 0003:046D:1017.0009: input,hidraw4: USB HID v1.11 Mouse [Logitech Anywhere MX] on usb-0000:00:1d.0-1.8/input2:3
[ 3.809962] asus_wmi: ASUS WMI generic driver loaded
[ 3.811843] asus_wmi: Initialization: 0x0
[ 3.811875] asus_wmi: BIOS WMI version: 0.9
[ 3.811963] asus_wmi: SFUN value: 0x0
[ 3.811966] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[ 3.812859] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input34
[ 3.931234] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[ 3.931235] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 3.931236] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 3.937721] cryptd: max_cpu_qlen set to 1000
[ 3.945097] AVX version of gcm_enc/dec engaged.
[ 3.945097] AES CTR mode by8 optimization enabled
[ 3.959302] input: Logitech K800 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.2/0003:046D:C52B.0003/0003:046D:406E.000A/input/input35
[ 3.976872] logitech-hidpp-device 0003:046D:406E.000A: input,hidraw5: USB HID v1.11 Keyboard [Logitech K800] on usb-0000:00:1d.0-1.7/input2:1
[ 3.982132] kvm: disabled by bios
[ 4.025809] kvm: disabled by bios
[ 4.086129] kvm: disabled by bios
[ 4.134007] kvm: disabled by bios
[ 4.286719] audit: type=1400 audit(1601125051.806:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=759 comm="apparmor_parser"
[ 4.286722] audit: type=1400 audit(1601125051.806:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=759 comm="apparmor_parser"
[ 4.286724] audit: type=1400 audit(1601125051.806:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=759 comm="apparmor_parser"
[ 4.288149] audit: type=1400 audit(1601125051.806:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=756 comm="apparmor_parser"
[ 4.288151] audit: type=1400 audit(1601125051.806:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=756 comm="apparmor_parser"
[ 4.288153] audit: type=1400 audit(1601125051.806:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=756 comm="apparmor_parser"
[ 4.288154] audit: type=1400 audit(1601125051.806:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=756 comm="apparmor_parser"
[ 4.288441] audit: type=1400 audit(1601125051.806:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=760 comm="apparmor_parser"
[ 4.288443] audit: type=1400 audit(1601125051.806:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=760 comm="apparmor_parser"
[ 4.307392] nvidia-uvm: Loaded the UVM driver, major device number 235.
[ 4.363586] intel_rapl_common: Found RAPL domain package
[ 4.363588] intel_rapl_common: Found RAPL domain core
[ 4.363591] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 4.509199] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.509200] Bluetooth: BNEP filters: protocol multicast
[ 4.509203] Bluetooth: BNEP socket layer initialized
[ 4.904825] systemd-journald[298]: File /var/log/journal/a1fc8e299bcf4194b3bc1e8be940df4c/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 5.040920] usbcore: registered new interface driver rtl8xxxu
[ 5.043087] rtl8xxxu 2-1.1:1.0 wlx18d6c71f5547: renamed from wlan0
[ 5.237913] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input36
[ 5.237965] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input37
[ 5.238003] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input38
[ 5.238039] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input39
[ 5.238075] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input40
[ 5.238111] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input41
[ 5.238443] input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input42
[ 5.287995] resource sanity check: requesting [mem 0x000e0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000e0000-0x000e3fff window]
[ 5.288148] caller os_map_kernel_space.part.10+0x6d/0x80 [nvidia] mapping multiple BARs
[ 5.429076] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[ 5.429214] caller os_map_kernel_space.part.10+0x6d/0x80 [nvidia] mapping multiple BARs
[ 6.596573] snd_hda_intel 0000:00:1b.0: azx_get_response timeout, switching to polling mode: last cmd=0x300f0000
[ 7.608610] snd_hda_intel 0000:00:1b.0: No response from codec, disabling MSI: last cmd=0x300f0000
[ 7.962375] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 7.962378] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO
[ 7.962414] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 8.612592] snd_hda_intel 0000:00:1b.0: Codec #3 probe error; disabling it...
[ 8.630281] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 8.630283] snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.630284] snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 8.630285] snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0
[ 8.630286] snd_hda_codec_realtek hdaudioC2D0: dig-out=0x11/0x1e
[ 8.630286] snd_hda_codec_realtek hdaudioC2D0: inputs:
[ 8.630288] snd_hda_codec_realtek hdaudioC2D0: Front Mic=0x19
[ 8.630289] snd_hda_codec_realtek hdaudioC2D0: Rear Mic=0x18
[ 8.630290] snd_hda_codec_realtek hdaudioC2D0: Line=0x1a
[ 8.648694] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input43
[ 8.648741] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input44
[ 8.648778] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card2/input45
[ 8.648817] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card2/input46
[ 8.648857] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card2/input47
[ 8.649019] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card2/input48
[ 8.649062] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card2/input49
[ 8.649104] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card2/input50
[ 9.928574] usb 2-1.4: reset high-speed USB device number 5 using ehci-pci
[ 10.310492] Bluetooth: RFCOMM TTY layer initialized
[ 10.310499] Bluetooth: RFCOMM socket layer initialized
[ 10.310503] Bluetooth: RFCOMM ver 1.11
[ 12.027588] rfkill: input handler disabled
[ 14.882012] logitech-hidpp-device 0003:046D:101A.0008: HID++ 1.0 device connected.
[ 16.734996] logitech-hidpp-device 0003:046D:406E.000A: HID++ 4.5 device connected.
moi@xxx:~$
