Ce site est optimisé pour être consulté depuis un navigateur moderne dans lequel JavaScript est activé.

casque bluetooth pas reconnu pas affiché dans les periphériques

Tonio38

Bonjour,
j'ai connecté mon casque bluetooth beyerdynamic mais il n'apparait pas dans les sorties de la carte son. Du coup imossible de l'écouter.
Quelqu'un aurait il une solution svp ?
Merci.
Antoine.

xubu1957

Bonjour,

Si tu ne trouves pas de solution dans > [Tuto] Pas de Bluetooth ? Quelques solutions

Il faudra fournir, en te servant du Retour utilisable de commande :

uname -a; lspci -nnk | grep -iA3 net; lsusb; dmesg | grep -i bluetooth; dmesg | grep -i firmware; lsmod | grep bluetooth

sudo service bluetooth status

dpkg -l | grep blue

et :

rfkill list all

cqfd93 a écritAstuce pour copier / coller sans erreur :

triple clic gauche pour sélectionner et copier une ligne entière

clic molette pour coller dans le terminal

Tonio38

Bonjour,

oui voila le resultat :

tonio@tonio-GT-R:~$ uname -a; lspci -nnk | grep -iA3 net; lsusb; dmesg | grep -i bluetooth; dmesg | grep -i firmware; lsmod | grep bluetooth
Linux tonio-GT-R 5.4.0-48-generic #52-Ubuntu SMP Thu Sep 10 10:58:49 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
	DeviceName: Onboard LAN Brodcom
	Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:0123]
	Kernel driver in use: r8169
	Kernel modules: r8169
02:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 02)
--
03:00.0 Network controller [0280]: Intel Corporation Wi-Fi 6 AX200 [8086:2723] (rev 1a)
	Subsystem: Intel Corporation Wi-Fi 6 AX200 [8086:008c]
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
	Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:0123]
	Kernel driver in use: r8169
	Kernel modules: r8169
05:00.0 Non-Volatile memory controller [0108]: Micron/Crucial Technology Device [c0a9:5403] (rev 03)
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 8087:0029 Intel Corp. 
Bus 003 Device 002: ID 2f0a:0201 Pixelauth Security Caliburn by Pixelauth
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 05e3:0626 Genesys Logic, Inc. USB3.1 Hub
Bus 002 Device 002: ID 05e3:0626 Genesys Logic, Inc. USB3.1 Hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 046d:c534 Logitech, Inc. Unifying Receiver
Bus 001 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[    2.630944] Bluetooth: Core ver 2.22
[    2.630966] Bluetooth: HCI device and connection manager initialized
[    2.631194] Bluetooth: HCI socket layer initialized
[    2.631197] Bluetooth: L2CAP socket layer initialized
[    2.631203] Bluetooth: SCO socket layer initialized
[    2.650914] Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017
[    2.654920] Bluetooth: hci0: Device revision is 1
[    2.654922] Bluetooth: hci0: Secure boot is enabled
[    2.654923] Bluetooth: hci0: OTP lock is enabled
[    2.654924] Bluetooth: hci0: API lock is enabled
[    2.654924] Bluetooth: hci0: Debug lock is disabled
[    2.654926] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    2.657823] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi
[    3.941212] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.941214] Bluetooth: BNEP filters: protocol multicast
[    3.941218] Bluetooth: BNEP socket layer initialized
[    4.016701] Bluetooth: hci0: Waiting for firmware download to complete
[    4.017708] Bluetooth: hci0: Firmware loaded in 1338537 usecs
[    4.017792] Bluetooth: hci0: Waiting for device to boot
[    4.034693] Bluetooth: hci0: Device booted in 16535 usecs
[    4.035531] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc
[    4.038708] Bluetooth: hci0: Failed to send Intel_Write_DDC (-22)
[   16.515876] Bluetooth: RFCOMM TTY layer initialized
[   16.515890] Bluetooth: RFCOMM socket layer initialized
[   16.515897] Bluetooth: RFCOMM ver 1.11
[ 3123.672382] Bluetooth: hci1: urb 00000000fa59bfd6 failed to resubmit (2)
[ 3261.373516] Bluetooth: hci1: urb 00000000a87d2f40 failed to resubmit (2)
[ 3557.761568] Bluetooth: hci1: urb 00000000ce052e51 failed to resubmit (2)
[    0.451052] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.466566] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    2.463206] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-cc-a0-50.ucode failed with error -2
[    2.463227] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-cc-a0-49.ucode failed with error -2
[    2.466800] iwlwifi 0000:03:00.0: loaded firmware version 48.4fa0041f.0 op_mode iwlmvm
[    2.630177] iwlwifi 0000:03:00.0: Allocated 0x00400000 bytes for firmware monitor.
[    2.654926] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    2.657823] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi
[    2.779435] [drm] Found VCN firmware Version ENC: 1.9 DEC: 1 VEP: 0 Revision: 28
[    2.779450] [drm] PSP loading VCN firmware
[    4.016701] Bluetooth: hci0: Waiting for firmware download to complete
[    4.017708] Bluetooth: hci0: Firmware loaded in 1338537 usecs
[ 2979.575545] usb 1-3.1: device firmware changed
[ 3044.053470] usb 1-3.1: device firmware changed
[ 3061.516223] usb 1-3.1: device firmware changed
[ 3086.000898] usb 1-3.1: device firmware changed
[ 3117.045875] usb 1-3.1: device firmware changed
[ 3128.592826] usb 1-3.1: device firmware changed
[ 3154.167548] usb 1-3.1: device firmware changed
[ 3229.044386] usb 1-3.1: device firmware changed
[ 3258.650623] usb 1-3.1: device firmware changed
[ 3270.335428] usb 1-3.1: device firmware changed
[ 3363.552315] usb 1-3.1: device firmware changed
[ 3542.535493] usb 1-3.1: device firmware changed
[ 3549.852202] usb 1-3.1: device firmware changed
[ 3561.339149] usb 1-3.1: device firmware changed
[ 3763.336332] usb 1-3.1: device firmware changed
bluetooth             581632  51 btrtl,btintel,btbcm,bnep,btusb,rfcomm
ecdh_generic           16384  2 bluetooth
tonio@tonio-GT-R:~$ sudo service bluetooth status
[sudo] Mot de passe de tonio : 
● bluetooth.service - Bluetooth service
     Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)
     Active: active (running) since Sat 2020-10-03 10:39:57 CEST; 1h 10min ago
       Docs: man:bluetoothd(8)
   Main PID: 1044 (bluetoothd)
     Status: "Running"
      Tasks: 1 (limit: 16672)
     Memory: 3.9M
     CGroup: /system.slice/bluetooth.service
             └─1044 /usr/lib/bluetooth/bluetoothd

oct. 03 10:39:57 tonio-GT-R systemd[1]: Starting Bluetooth service...
oct. 03 10:39:57 tonio-GT-R bluetoothd[1044]: Bluetooth daemon 5.53
oct. 03 10:39:57 tonio-GT-R bluetoothd[1044]: Starting SDP server
oct. 03 10:39:57 tonio-GT-R bluetoothd[1044]: Bluetooth management interface 1.14 initialized
oct. 03 10:39:57 tonio-GT-R systemd[1]: Started Bluetooth service.
oct. 03 10:40:10 tonio-GT-R bluetoothd[1044]: Endpoint registered: sender=:1.72 path=/MediaEndpoint/A2DPSink/sbc
oct. 03 10:40:10 tonio-GT-R bluetoothd[1044]: Endpoint registered: sender=:1.72 path=/MediaEndpoint/A2DPSource/sbc
oct. 03 11:48:12 tonio-GT-R bluetoothd[1044]: /org/bluez/hci0/dev_00_22_BB_74_16_86/sep1/fd0: fd(68) ready
tonio@tonio-GT-R:~$ dpkg -l | grep blue
ii  bluez                                      5.53-0ubuntu3                         amd64        Bluetooth tools and daemons
ii  bluez-btsco                                1:0.50-0ubuntu7                       amd64        Bluez Bluetooth SCO tool
ii  bluez-cups                                 5.53-0ubuntu3                         amd64        Bluetooth printer driver for CUPS
ii  bluez-obexd                                5.53-0ubuntu3                         amd64        bluez obex daemon
ii  gir1.2-gnomebluetooth-1.0:amd64            3.34.1-1                              amd64        Introspection data for GnomeBluetooth
ii  gnome-bluetooth                            3.34.1-1                              amd64        GNOME Bluetooth tools
ii  libbluetooth3:amd64                        5.53-0ubuntu3                         amd64        Library to use the BlueZ Linux Bluetooth stack
ii  libgnome-bluetooth13:amd64                 3.34.1-1                              amd64        GNOME Bluetooth tools - support library
ii  pulseaudio-module-bluetooth                1:13.99.1-1ubuntu3.6                  amd64        Bluetooth module for PulseAudio sound server
tonio@tonio-GT-R:~$ rfkill list all
0: hci0: Bluetooth
	Soft blocked: no
	Hard blocked: no
1: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no
tonio@tonio-GT-R:~$

xubu1957

Avais-tu installé [doc]pavucontrol[/doc] ?

Tonio38

A priori ça fonctionne maintenant ....à force de redémarrer et déconnecter reconnecter ?
Merci !

xubu1957

Tu as une carte Intel de dernière génération et un noyau récent !

Montre :

nmcli dev wifi

Tonio38

tonio@tonio-GT-R:~$ nmcli dev wifi
IN-USE  BSSID              SSID                         MODE   CHAN  RATE      >
        B8:EE:0E:C8:3E:DE  Livebox-3EDE                 Infra  11    130 Mbit/s>
*       B8:EE:0E:C8:3E:DF  Livebox-3EDE                 Infra  132   405 Mbit/s>
        44:CE:7D:E2:CA:BC  SFR_CAB8                     Infra  6     130 Mbit/s>
        AE:E2:D3:CA:98:D8  DIRECT-D8-HP OfficeJet 5200  Infra  6     130 Mbit/s>
lines 1-5/5 (END)...skipping...
IN-USE  BSSID              SSID                         MODE   CHAN  RATE        SIGNAL  BARS  SECURITY  
        B8:EE:0E:C8:3E:DE  Livebox-3EDE                 Infra  11    130 Mbit/s  100     ▂▄▆█  WPA1 WPA2 
*       B8:EE:0E:C8:3E:DF  Livebox-3EDE                 Infra  132   405 Mbit/s  78      ▂▄▆_  WPA1 WPA2 
        44:CE:7D:E2:CA:BC  SFR_CAB8                     Infra  6     130 Mbit/s  62      ▂▄▆_  WPA1      
        AE:E2:D3:CA:98:D8  DIRECT-D8-HP OfficeJet 5200  Infra  6     130 Mbit/s  52      ▂▄__  WPA2      
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-5/5 (END)
























































IN-USE  BSSID              SSID                         MODE   CHAN  RATE        SIGNAL  BARS  SECURITY  
        B8:EE:0E:C8:3E:DE  Livebox-3EDE                 Infra  11    130 Mbit/s  100     ▂▄▆█  WPA1 WPA2 
*       B8:EE:0E:C8:3E:DF  Livebox-3EDE                 Infra  132   405 Mbit/s  78      ▂▄▆_  WPA1 WPA2 
        44:CE:7D:E2:CA:BC  SFR_CAB8                     Infra  6     130 Mbit/s  62      ▂▄▆_  WPA1      
        AE:E2:D3:CA:98:D8  DIRECT-D8-HP OfficeJet 5200  Infra  6     130 Mbit/s  52      ▂▄__  WPA2      
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-5/5 (END)

xubu1957

Il faudrait mettre un seul chiffrement WPA2, comme indiqué au § 1 > [Tuto] Pas de Wi-fi ? Eléments importants à vérifier

Et essayer un canal 36 pour les fréquences en 5 GHz.

Le 07/03/2018, un expert du wifi sur Ubuntu, chili555 a écritPlease check the settings in the router. WPA2-AES is preferred; not any WPA and WPA2 mixed mode and certainly not TKIP. Second, if your router is capable of N speeds, you may have better connectivity with a channel width of 20 MHz in the 2.4 GHz band instead of automatic 20/40 MHz, although it is likely to affect N speeds. I also have better luck with a fixed channel, either 1, 6 or 11, rather than automatic channel selection. Also, be certain the router is not set to use N speeds only; auto B, G and N is preferred. After making these changes, reboot the router.

Veuillez vérifier les paramètres dans le routeur. WPA2-AES est préférable ; pas de mode mixte WPA et WPA2 et certainement pas de TKIP. Deuxièmement, si votre routeur est capable du mode N, vous pouvez avoir une meilleure connectivité avec une largeur de canal de 20 MHz dans la bande 2,4 GHz au lieu de 20/40 MHz automatique, bien que cela puisse affecter mode N. J'ai aussi plus de chance avec un canal fixe, 1, 6 ou 11, plutôt que la sélection automatique des canaux. Assurez-vous également que le routeur n'est pas configuré pour utiliser uniquement du mode N; Auto B, G et N sont préférés. Après avoir apporté ces modifications, redémarrez le routeur.

> AC600 usb wifi adapter 17.10 need help -wireless script pastebin inc...

> chili555

Tonio38

voila c'est fait :-)

tonio@tonio-GT-R:~$ nmcli dev wifi
IN-USE  BSSID              SSID                         MODE   CHAN  RATE      >
        B8:EE:0E:C8:3E:DE  Livebox-3EDE                 Infra  11    130 Mbit/s>
*       B8:EE:0E:C8:3E:DF  Livebox-3EDE                 Infra  36    405 Mbit/s>
        44:CE:7D:E2:CA:BC  SFR_CAB8                     Infra  6     130 Mbit/s>
        AE:E2:D3:CA:98:D8  DIRECT-D8-HP OfficeJet 5200  Infra  6     130 Mbit/s>
lines 1-5/5 (END)...skipping...
IN-USE  BSSID              SSID                         MODE   CHAN  RATE        SIGNAL  BARS  SECURITY 
        B8:EE:0E:C8:3E:DE  Livebox-3EDE                 Infra  11    130 Mbit/s  100     ▂▄▆█  WPA2     
*       B8:EE:0E:C8:3E:DF  Livebox-3EDE                 Infra  36    405 Mbit/s  87      ▂▄▆█  WPA2     
        44:CE:7D:E2:CA:BC  SFR_CAB8                     Infra  6     130 Mbit/s  69      ▂▄▆_  WPA1     
        AE:E2:D3:CA:98:D8  DIRECT-D8-HP OfficeJet 5200  Infra  6     130 Mbit/s  64      ▂▄▆_  WPA2     
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-5/5 (END)
























































IN-USE  BSSID              SSID                         MODE   CHAN  RATE        SIGNAL  BARS  SECURITY 
        B8:EE:0E:C8:3E:DE  Livebox-3EDE                 Infra  11    130 Mbit/s  100     ▂▄▆█  WPA2     
*       B8:EE:0E:C8:3E:DF  Livebox-3EDE                 Infra  36    405 Mbit/s  87      ▂▄▆█  WPA2     
        44:CE:7D:E2:CA:BC  SFR_CAB8                     Infra  6     130 Mbit/s  69      ▂▄▆_  WPA1     
        AE:E2:D3:CA:98:D8  DIRECT-D8-HP OfficeJet 5200  Infra  6     130 Mbit/s  64      ▂▄▆_  WPA2     
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-5/5 (END)

Merci !

xubu1957

 Infra  132   405 Mbit/s  78      ▂▄▆_  WPA1 WPA2

Infra  36    405 Mbit/s  87      ▂▄▆█  WPA2

On voit l'amélioration du signal.

Tonio38

Merci xubu1957 ! effectivement je vois que ca marche mieux !
d'autres astuces ? 🙂

xubu1957

Montre aussi :

dpkg -l | grep -v ^ii

snap list --all

Tonio38

Voilà !

tonio@tonio-GT-R:~$ dpkg -l | grep -v ^ii
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom                                        Version                               Architecture Description
+++-==========================================-=====================================-============-======================================================================================================
rc  linux-image-5.4.0-26-generic               5.4.0-26.30                           amd64        Signed kernel image generic
rc  linux-image-5.4.0-45-generic               5.4.0-45.49                           amd64        Signed kernel image generic
rc  linux-modules-5.4.0-26-generic             5.4.0-26.30                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-45-generic             5.4.0-45.49                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-26-generic       5.4.0-26.30                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-45-generic       5.4.0-45.49                           amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
tonio@tonio-GT-R:~$ snap list --all
Nom                  Version                     Révision  Suivi            Éditeur          Notes
0ad                  0.0.23b-alpha               177       latest/stable    osomon           -
bombsquad            1.4.150                     3         latest/stable    popey            -
canonical-livepatch  9.5.5                       95        latest/stable    canonical✓       -
chromium-ffmpeg      0.1                         17        latest/stable    canonical✓       -
chromium-ffmpeg      0.1                         15        latest/stable    canonical✓       désactivé
core                 16-2.45.3.1                 9804      latest/stable    canonical✓       core,désactivé
core                 16-2.46.1                   9993      latest/stable    canonical✓       core
core18               20200724                    1885      latest/stable    canonical✓       base
core18               20200311                    1705      latest/stable    canonical✓       base,désactivé
gnome-3-28-1804      3.28.0-17-gde3d74c.de3d74c  128       latest/stable    canonical✓       -
gnome-3-34-1804      0+git.3556cb3               60        latest/stable/…  canonical✓       -
gnome-3-34-1804      0+git.3009fc7               36        latest/stable/…  canonical✓       désactivé
gtk-common-themes    0.1-36-gc75f853             1506      latest/stable/…  canonical✓       -
icloud-for-linux     0.8                         166       latest/stable    marcustomlinson  -
indicator-sensors    1.2                         291       latest/stable    alexmurray       -
libimobiledevice     1.2.77-20190225-001         2         latest/edge      qmfrederik       -
mc-installer         7.0                         499       latest/stable    kz6fittycent     -
meteo                0.9.8                       108       latest/stable    carlossuarez     -
obs-studio           25.0.8                      1124      latest/stable    snapcrafters     -
opera                71.0.3770.171               92        latest/stable    opera-software✓  désactivé
opera                71.0.3770.198               93        latest/stable    opera-software✓  -
sdlpop               v1.21                       296       latest/stable    snapcrafters     -
snap-store           3.36.0-74-ga164ec9          433       latest/stable/…  canonical✓       désactivé
snap-store           3.36.0-80-g208fd61          467       latest/stable/…  canonical✓       -
snapd                2.46.1                      9279      latest/stable    canonical✓       snapd
snapd                2.45.3.1                    8790      latest/stable    canonical✓       snapd,désactivé
spotify              1.1.26.501.gbe11e53b-15     41        latest/stable    spotify✓         désactivé
spotify              1.1.42.622.gbd112320-37     42        latest/stable    spotify✓         -
tonio@tonio-GT-R:~$

xubu1957

Pour nettoyer :

Le 11/02/2017, moko138 a écritPour supprimer tous ces fichiers de configuration devenus sans objets et marqués "rc", et uniquement ces fichiers, exécute :

dpkg -l | awk '/^rc/{print $2}' | xargs -r sudo dpkg -P

sudo apt clean && snap list --all | awk 'BEGIN {print "#! /bin/sh\n"} ; /désactivé|disabled/ {print "snap remove "$1" --revision "$3"\n"} ; END {print "exit 0"}' > script && chmod +x script && ./script && rm script && echo && snap list --all && echo && df -Th | grep -Ev "tmpfs|squashfs"

Commande stockée au post #7 > |RESOLU] snap nettoyage des versions désactivées.