Bonjour,
merci pour la réponse, voici les résultats des commandes de l'autre post:
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
rien de brancher excepté une souris. La deuxième, j'ai beau lire, je n'y comprends rien sauf qu'il semble y avoir des erreurs...sans déc!
[ 22.394869] ath: EEPROM regdomain: 0x67
[ 22.394871] ath: EEPROM indicates we should expect a direct regpair map
[ 22.394874] ath: Country alpha2 being used: 00
[ 22.394875] ath: Regpair used: 0x67
[ 22.455943] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 22.456435] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 22.461868] ath5k 0000:06:00.0 wlp6s0: renamed from wlan0
[ 22.473358] snd_hda_codec_realtek hdaudioC0D0: ALC262: SKU not ready 0x411111f0
[ 22.473559] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 22.473562] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 22.473564] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 22.473566] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 22.473568] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 22.473571] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 23.141878] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 23.141990] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 33.189784] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 33.192399] sky2 0000:02:00.0 enp2s0: enabling interface
[ 33.195331] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 33.234481] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[ 34.381122] kauditd_printk_skb: 46 callbacks suppressed
[ 34.381124] audit: type=1400 audit(1602151610.376:58): apparmor="DENIED" operation="open" profile="system_tor" name="/etc/ssl/openssl.cnf" pid=851 comm="tor" requested_mask="r" denied_mask="r" fsuid=122 ouid=0
[ 44.279313] rfkill: input handler disabled
[ 198.745171] sky2 0000:02:00.0 enp2s0: Link is up at 100 Mbps, full duplex, flow control both
[ 198.745229] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 228.832901] perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 356.787526] perf: interrupt took too long (3170 > 3126), lowering kernel.perf_event_max_sample_rate to 63000
[ 697.452076] usb 6-2: new full-speed USB device number 2 using uhci_hcd
[ 697.588076] usb 6-2: device descriptor read/64, error -71
[ 697.832071] usb 6-2: device descriptor read/64, error -71
[ 698.068076] usb 6-2: new full-speed USB device number 3 using uhci_hcd
[ 698.204075] usb 6-2: device descriptor read/64, error -71
[ 698.448074] usb 6-2: device descriptor read/64, error -71
[ 698.556110] usb usb6-port2: attempt power cycle
[ 698.556128] usb usb6-port2: failed to disable port power
[ 698.684075] usb 6-2: new full-speed USB device number 4 using uhci_hcd
[ 699.104092] usb 6-2: device not accepting address 4, error -71
[ 699.232160] usb 6-2: new full-speed USB device number 5 using uhci_hcd
[ 699.656104] usb 6-2: device not accepting address 5, error -71
[ 699.656169] usb usb6-port2: unable to enumerate USB device
la troisième, je comprends qu'il ne détecte pas la clef (pourtant ya le son lors du branchement) et uniquement le disque dur
Modèle: ATA WDC WD5000LPCX-0 (scsi)
Disque /dev/sda : 500GB
Taille des secteurs (logiques/physiques): 512B/4096B
Table de partitions : msdos
Drapeaux de disque :
Numéro Début Fin Taille Type Système de fichiers Fanions
1 1049kB 500GB 500GB primary ext4 démarrage
La quatrième qui est la même que la première donne le même résultat:
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
ensuite c'est de tamoul pour moi:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1509632k,nr_inodes=377408,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=306420k,mode=755)
/dev/sda1 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=29,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=12692)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
mqueue on /dev/mqueue type mqueue (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
/var/lib/snapd/snaps/gnome-calculator_544.snap on /snap/gnome-calculator/544 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/vlc_1700.snap on /snap/vlc/1700 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_539.snap on /snap/gnome-characters/539 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_748.snap on /snap/gnome-calculator/748 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_123.snap on /snap/gnome-system-monitor/123 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_9436.snap on /snap/core/9436 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_98.snap on /snap/gnome-3-26-1604/98 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/vlc_1620.snap on /snap/vlc/1620 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_81.snap on /snap/gnome-logs/81 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_1353.snap on /snap/gtk-common-themes/1353 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_1506.snap on /snap/gtk-common-themes/1506 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_9993.snap on /snap/core/9993 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_100.snap on /snap/gnome-3-26-1604/100 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core18_1885.snap on /snap/core18/1885 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-28-1804_116.snap on /snap/gnome-3-28-1804/116 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core18_1754.snap on /snap/core18/1754 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_550.snap on /snap/gnome-characters/550 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-34-1804_36.snap on /snap/gnome-3-34-1804/36 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_100.snap on /snap/gnome-logs/100 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-34-1804_33.snap on /snap/gnome-3-34-1804/33 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_148.snap on /snap/gnome-system-monitor/148 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-28-1804_128.snap on /snap/gnome-3-28-1804/128 type squashfs (ro,nodev,relatime,x-gdu.hide)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=306416k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
l'avant dernière:
total 8
drwxr-x---+ 2 root root 4096 sept. 26 21:31 .
drwxr-xr-x 3 root root 4096 juil. 30 2018 ..
suit du vietnamien:
[ 22.394871] ath: EEPROM indicates we should expect a direct regpair map
[ 22.394874] ath: Country alpha2 being used: 00
[ 22.394875] ath: Regpair used: 0x67
[ 22.455943] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 22.456435] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 22.461868] ath5k 0000:06:00.0 wlp6s0: renamed from wlan0
[ 22.473358] snd_hda_codec_realtek hdaudioC0D0: ALC262: SKU not ready 0x411111f0
[ 22.473559] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 22.473562] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 22.473564] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 22.473566] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 22.473568] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 22.473571] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 23.141878] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 23.141990] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 33.189784] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 33.192399] sky2 0000:02:00.0 enp2s0: enabling interface
[ 33.195331] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 33.234481] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[ 34.381122] kauditd_printk_skb: 46 callbacks suppressed
[ 34.381124] audit: type=1400 audit(1602151610.376:58): apparmor="DENIED" operation="open" profile="system_tor" name="/etc/ssl/openssl.cnf" pid=851 comm="tor" requested_mask="r" denied_mask="r" fsuid=122 ouid=0
[ 44.279313] rfkill: input handler disabled
[ 198.745171] sky2 0000:02:00.0 enp2s0: Link is up at 100 Mbps, full duplex, flow control both
[ 198.745229] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 228.832901] perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 356.787526] perf: interrupt took too long (3170 > 3126), lowering kernel.perf_event_max_sample_rate to 63000
[ 697.452076] usb 6-2: new full-speed USB device number 2 using uhci_hcd
[ 697.588076] usb 6-2: device descriptor read/64, error -71
[ 697.832071] usb 6-2: device descriptor read/64, error -71
[ 698.068076] usb 6-2: new full-speed USB device number 3 using uhci_hcd
[ 698.204075] usb 6-2: device descriptor read/64, error -71
[ 698.448074] usb 6-2: device descriptor read/64, error -71
[ 698.556110] usb usb6-port2: attempt power cycle
[ 698.556128] usb usb6-port2: failed to disable port power
[ 698.684075] usb 6-2: new full-speed USB device number 4 using uhci_hcd
[ 699.104092] usb 6-2: device not accepting address 4, error -71
[ 699.232160] usb 6-2: new full-speed USB device number 5 using uhci_hcd
[ 699.656104] usb 6-2: device not accepting address 5, error -71
[ 699.656169] usb usb6-port2: unable to enumerate USB device
[ 876.115551] perf: interrupt took too long (3997 > 3962), lowering kernel.perf_event_max_sample_rate to 50000
Là cela semble plus clair:
/dev/sdb1 on /home/nicolas/Mount type fuseblk
bash: /dev/sdb1: Aucun fichier ou dossier de ce type
ensuite
dpkg -l | grep -E "usb|tweak"
ii ippusbxd 1.32-2 amd64 Daemon for IPP USB printer support
ii libgusb2:amd64 0.2.11-1 amd64 GLib wrapper around libusb1
ii libusb-1.0-0:amd64 2:1.0.21-2 amd64 userspace USB programming library
ii libusb-1.0-0:i386 2:1.0.21-2 i386 userspace USB programming library
ii libusbmuxd4:amd64 1.1.0~git20171206.c724e70f-0.1 amd64 USB multiplexor daemon for iPhone and iPod Touch devices - library
ii mousetweaks 3.12.0-4 amd64 mouse accessibility enhancements for the GNOME desktop
ii usb-creator-common 0.3.5ubuntu18.04.2 amd64 create a startup disk using a CD or disc image (common files)
ii usb-modeswitch 2.5.2+repack0-2ubuntu1 amd64 mode switching tool for controlling "flip flop" USB devices
ii usb-modeswitch-data 20170806-2 all mode switching data for usb-modeswitch
ii usbmuxd 1.1.0-2ubuntu0.1 amd64 USB multiplexor daemon for iPhone and iPod Touch devices
ii usbutils 1:007-4build1 amd64 Linux USB utilities
puis, là on lit qu'il voit la clef.....c'est étrange qu'est ce qu'il empèche de la lire ?
sudo parted -l
Modèle: ATA WDC WD5000LPCX-0 (scsi)
Disque /dev/sda : 500GB
Taille des secteurs (logiques/physiques): 512B/4096B
Table de partitions : msdos
Drapeaux de disque :
Numéro Début Fin Taille Type Système de fichiers Fanions
1 1049kB 500GB 500GB primary ext4 démarrage
L'auteur de l'aide dit cela :" Je crois que le moment est venu de lancer les manoeuvres de récupération.
photorec est dans le paquet testdisk." mais comment faire sachant que photorec (j'ai installé ne montre que le dur et pas la clef :/)
Merci d'avance.
