Ce site est optimisé pour être consulté depuis un navigateur moderne dans lequel JavaScript est activé.

Wacom Intuos S

marco56

Bonjour,
Il y a un moment, j'avais réussi à configurer ma tablette mais je n'y parviens plus. C'était déjà aléatoire mais maintenant, impossible d'avoir une surface active correcte.
Je n'ai que la moitié de la tablette qui est active.
Voici mes dernières lignes de commande :

marco5@marco5-All-Series:~$ xsetwacom --list dev
Wacom Co.,Ltd. Intuos S stylus  	id: 11	type: STYLUS    
Wacom Co.,Ltd. Intuos S eraser  	id: 15	type: ERASER    
marco5@marco5-All-Series:~$ lsusb | grep -i wacom
Bus 003 Device 004: ID 2d1f:0374 Wacom Co.,Ltd. Intuos S
marco5@marco5-All-Series:~$ xsetwacom get 004 all
Property 'Wacom Tablet Area' does not exist on device.
Property 'Wacom Button Actions' does not exist on device.
Property 'Wacom Button Actions' does not exist on device.
Property 'Wacom Button Actions' does not exist on device.
Property 'Wacom Button Actions' does not exist on device.
Property 'Wacom Button Actions' does not exist on device.
Property 'Wacom Button Actions' does not exist on device.
Property 'Wacom Debug Levels' does not exist on device.
Property 'Wacom Debug Levels' does not exist on device.
Property 'Wacom Sample and Suppress' does not exist on device.
Property 'Wacom Sample and Suppress' does not exist on device.
Property 'Wacom Pressurecurve' does not exist on device.
Option "Mode" "Relative"
Property 'Wacom Hover Click' does not exist on device.
Property 'Wacom Enable Touch' does not exist on device.
Property 'Wacom Hardware Touch Switch' does not exist on device.
Property 'Wacom Enable Touch Gesture' does not exist on device.
Property 'Wacom Touch Gesture Parameters' does not exist on device.
Property 'Wacom Touch Gesture Parameters' does not exist on device.
Property 'Wacom Touch Gesture Parameters' does not exist on device.
Property 'Wacom Proximity Threshold' does not exist on device.
Property 'Wacom Rotation' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Property 'Wacom Pressure Threshold' does not exist on device.
Property 'Wacom Tool Type' does not exist on device.
Property 'Wacom Serial IDs' does not exist on device.
Property 'Wacom Serial IDs' does not exist on device.
Property 'Wacom Serial IDs' does not exist on device.
Property 'Wacom Serial ID binding' does not exist on device.
Property 'Wacom Serial IDs' does not exist on device.
Property 'Wacom Pressure Recalibration' does not exist on device.
Property 'Wacom Panscroll Threshold' does not exist on device.
marco5@marco5-All-Series:~$

Si vous avez une idée car j'ai tenté tout ce que j'ai pu, notamment les pistes évoquées sur ce forum.
Bonne semaine à tous et toutes.

xubu1957

Bonjour,

Montre, pour les aidants :

dpkg -l | grep wacom

 dpkg -l | grep xserver-xorg-input-wacom

xsetwacom --list parameters

marco56

Voici :

marco5@marco5-All-Series:~$ dpkg -l | grep wacom
ii  libwacom-common                               1.3-2ubuntu1                              all          Wacom model feature query library (common files)
ii  libwacom2:amd64                               1.3-2ubuntu1                              amd64        Wacom model feature query library
ii  xserver-xorg-input-wacom                      1:0.39.0-0ubuntu1                         amd64        X.Org X server -- Wacom input driver
marco5@marco5-All-Series:~$  dpkg -l | grep xserver-xorg-input-wacom
ii  xserver-xorg-input-wacom                      1:0.39.0-0ubuntu1                         amd64        X.Org X server -- Wacom input driver
marco5@marco5-All-Series:~$ xsetwacom --list parameters
Area             - Valid tablet area in device coordinates. 
Button           - X11 event to which the given button should be mapped. 
ToolDebugLevel   - Level of debugging trace for individual tools (default is 0 [off]). 
TabletDebugLevel - Level of debugging statements applied to shared code paths between all tools associated with the same tablet (default is 0 [off]). 
Suppress         - Number of points trimmed (default is 2). 
RawSample        - Number of raw data used to filter the points (default is 4). 
PressureCurve    - Bezier curve for pressure (default is 0 0 100 100 [linear]). 
Mode             - Switches cursor movement mode (default is absolute). 
TabletPCButton   - Turns on/off Tablet PC buttons (default is off for regular tablets, on for Tablet PC). 
Touch            - Turns on/off Touch events (default is on). 
HWTouchSwitchState - Touch events turned on/off by hardware switch. 
Gesture          - Turns on/off multi-touch gesture events (default is on). 
ZoomDistance     - Minimum distance for a zoom gesture (default is 50). 
ScrollDistance   - Minimum motion before sending a scroll gesture (default is 20). 
TapTime          - Minimum time between taps for a right click (default is 250). 
CursorProximity  - Sets cursor distance for proximity-out in distance from the tablet (default is 10 for Intuos series, 42 for Graphire series). 
Rotate           - Sets the rotation of the tablet. Values = none, cw, ccw, half (default is none). 
RelWheelUp       - X11 event to which relative wheel up should be mapped. 
RelWheelDown     - X11 event to which relative wheel down should be mapped. 
AbsWheelUp       - X11 event to which absolute wheel up should be mapped. 
AbsWheelDown     - X11 event to which absolute wheel down should be mapped. 
AbsWheel2Up      - X11 event to which absolute wheel up should be mapped. 
AbsWheel2Down    - X11 event to which absolute wheel down should be mapped. 
StripLeftUp      - X11 event to which left strip up should be mapped. 
StripLeftDown    - X11 event to which left strip down should be mapped. 
StripRightUp     - X11 event to which right strip up should be mapped. 
StripRightDown   - X11 event to which right strip down should be mapped. 
Threshold        - Sets tip/eraser pressure threshold (default is 27). 
ResetArea        - Resets the bounding coordinates to default in tablet units. 
ToolType         - Returns the tool type of the associated device. 
ToolSerial       - Returns the serial number of the current device in proximity.
ToolID           - Returns the tool ID of the current tool in proximity.
ToolSerialPrevious - Returns the serial number of the previous device in proximity.
BindToSerial     - Binds this device to the serial number.
TabletID         - Returns the tablet ID of the associated device. 
PressureRecalibration - Turns on/off Tablet pressure recalibration
PanScrollThreshold - Adjusts distance required for pan actions to generate a scroll event
MapToOutput      - Map the device to the given output. 
all              - Get value for all parameters.

marco56

J'ai trouvé ceci mais c'est un peu compliqué et en anglais. Du coup, j'ai peur de faire des bêtises !
https://linuxwacom.github.io/
J'ai quand même fait cela :

marco5@marco5-All-Series:~$ sudo apt-get install build-essential autoconf linux-headers-$(uname -r)
[sudo] Mot de passe de marco5 : 
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
autoconf est déjà la version la plus récente (2.69-11.1).
build-essential est déjà la version la plus récente (12.8ubuntu1).
linux-headers-5.4.0-48-generic est déjà la version la plus récente (5.4.0-48.52).
linux-headers-5.4.0-48-generic passé en « installé manuellement ».
0 mis à jour, 0 nouvellement installés, 0 à enlever et 1 non mis à jour.
marco5@marco5-All-Series:~$ grep "" /sys/module/wacom*/version
grep: /sys/module/wacom*/version: Aucun fichier ou dossier de ce type
marco5@marco5-All-Series:~$ modinfo wacom | grep version
version:        v2.00-0.46.0
srcversion:     62537F6171CFA60B57FF9D7

marco56

Rien modifié, ce matin, la tablette est reconnue.
Je ne comprends pas trop car hier, j'avais déjà fait des redémarrages, sans succès.

marco56

Elle est reconnue mais cette fois, lorsqu'affecte la surface à un écran, je n'ai plus le stylet actif alors qu'a priori, tout est ok.