Le fichier résultat de dmesg:
[ 0.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12
[ 0.000000] Linux version 5.4.0-51-generic (buildd@lcy01-amd64-020) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #56-Ubuntu SMP Mon Oct 5 14:28:49 UTC 2020 (Ubuntu 5.4.0-51.56-generic 5.4.65)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-51-generic root=UUID=0b8cac27-a007-4e7c-8291-f75bb37bc4f1 ro pci=nomsi,noaer quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ca1d6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca1d7000-0x00000000ca1ddfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ca1de000-0x00000000ca62afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca62b000-0x00000000caa51fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000caa52000-0x00000000dd7d8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd7d9000-0x00000000dd9e0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dd9e1000-0x00000000dd9f6fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dd9f7000-0x00000000ddf32fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ddf33000-0x00000000deffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. M11AD/M11AD, BIOS 0501 12/25/2013
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2793.611 MHz processor
[ 0.001582] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001584] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001589] last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[ 0.001593] MTRR default type: uncachable
[ 0.001593] MTRR fixed ranges enabled:
[ 0.001594] 00000-9FFFF write-back
[ 0.001595] A0000-BFFFF uncachable
[ 0.001595] C0000-CFFFF write-protect
[ 0.001596] D0000-E7FFF uncachable
[ 0.001597] E8000-FFFFF write-protect
[ 0.001597] MTRR variable ranges enabled:
[ 0.001598] 0 base 0000000000 mask 7E00000000 write-back
[ 0.001599] 1 base 0200000000 mask 7FF0000000 write-back
[ 0.001600] 2 base 0210000000 mask 7FF8000000 write-back
[ 0.001600] 3 base 0218000000 mask 7FFC000000 write-back
[ 0.001601] 4 base 021C000000 mask 7FFE000000 write-back
[ 0.001602] 5 base 021E000000 mask 7FFF000000 write-back
[ 0.001602] 6 base 00E0000000 mask 7FE0000000 uncachable
[ 0.001603] 7 disabled
[ 0.001603] 8 disabled
[ 0.001603] 9 disabled
[ 0.001894] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002015] total RAM covered: 8176M
[ 0.002338] Found optimal setting for mtrr clean up
[ 0.002339] gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G
[ 0.002594] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.002597] last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[ 0.009430] found SMP MP-table at [mem 0x000fd790-0x000fd79f]
[ 0.015836] check: Scanning 1 areas for low memory corruption
[ 0.015840] Using GB pages for direct mapping
[ 0.016548] RAMDISK: [mem 0x2cfb7000-0x327d2fff]
[ 0.016554] ACPI: Early table checksum verification disabled
[ 0.016557] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.016560] ACPI: XSDT 0x00000000DD9E5080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.016565] ACPI: FACP 0x00000000DD9F2280 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.016569] ACPI: DSDT 0x00000000DD9E5188 00D0F4 (v02 ALASKA A M I 00000024 INTL 20091112)
[ 0.016571] ACPI: FACS 0x00000000DDF31080 000040
[ 0.016573] ACPI: APIC 0x00000000DD9F2390 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.016576] ACPI: FPDT 0x00000000DD9F2408 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.016578] ACPI: SSDT 0x00000000DD9F2450 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.016580] ACPI: SSDT 0x00000000DD9F2990 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.016582] ACPI: MCFG 0x00000000DD9F3468 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.016584] ACPI: HPET 0x00000000DD9F34A8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.016587] ACPI: SSDT 0x00000000DD9F34E0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.016589] ACPI: SSDT 0x00000000DD9F3850 003482 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.016591] ACPI: MSDM 0x00000000DD9F6CD8 000055 (v01 ALASKA A M I 01072009 00000000)
[ 0.016593] ACPI: BGRT 0x00000000DD9F6D30 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.016601] ACPI: Local APIC address 0xfee00000
[ 0.016673] No NUMA configuration found
[ 0.016673] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[ 0.016682] NODE_DATA(0) allocated [mem 0x21efd5000-0x21effffff]
[ 0.016879] Zone ranges:
[ 0.016879] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.016880] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.016881] Normal [mem 0x0000000100000000-0x000000021effffff]
[ 0.016882] Device empty
[ 0.016882] Movable zone start for each node
[ 0.016885] Early memory node ranges
[ 0.016886] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.016887] node 0: [mem 0x0000000000100000-0x00000000ca1d6fff]
[ 0.016887] node 0: [mem 0x00000000ca1de000-0x00000000ca62afff]
[ 0.016888] node 0: [mem 0x00000000caa52000-0x00000000dd7d8fff]
[ 0.016888] node 0: [mem 0x00000000defff000-0x00000000deffffff]
[ 0.016889] node 0: [mem 0x0000000100000000-0x000000021effffff]
[ 0.017015] Zeroed struct page in unavailable ranges: 15544 pages
[ 0.017016] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[ 0.017017] On node 0 totalpages: 2081608
[ 0.017018] DMA zone: 64 pages used for memmap
[ 0.017019] DMA zone: 21 pages reserved
[ 0.017019] DMA zone: 3996 pages, LIFO batch:0
[ 0.017061] DMA32 zone: 14095 pages used for memmap
[ 0.017061] DMA32 zone: 902060 pages, LIFO batch:63
[ 0.026555] Normal zone: 18368 pages used for memmap
[ 0.026556] Normal zone: 1175552 pages, LIFO batch:63
[ 0.038316] ACPI: PM-Timer IO Port: 0x1808
[ 0.038318] ACPI: Local APIC address 0xfee00000
[ 0.038324] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.038333] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.038335] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.038336] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.038337] ACPI: IRQ0 used by override.
[ 0.038338] ACPI: IRQ9 used by override.
[ 0.038339] Using ACPI (MADT) for SMP configuration information
[ 0.038341] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.038344] TSC deadline timer available
[ 0.038345] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.038361] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.038362] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.038363] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.038363] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.038363] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.038365] PM: Registered nosave memory: [mem 0xca1d7000-0xca1ddfff]
[ 0.038366] PM: Registered nosave memory: [mem 0xca62b000-0xcaa51fff]
[ 0.038367] PM: Registered nosave memory: [mem 0xdd7d9000-0xdd9e0fff]
[ 0.038367] PM: Registered nosave memory: [mem 0xdd9e1000-0xdd9f6fff]
[ 0.038368] PM: Registered nosave memory: [mem 0xdd9f7000-0xddf32fff]
[ 0.038368] PM: Registered nosave memory: [mem 0xddf33000-0xdeffefff]
[ 0.038369] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
[ 0.038370] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.038370] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.038371] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.038371] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.038371] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.038372] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.038372] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.038373] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.038373] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.038373] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.038374] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.038375] [mem 0xdf000000-0xf7ffffff] available for PCI devices
[ 0.038376] Booting paravirtualized kernel on bare hardware
[ 0.038379] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.038383] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.038528] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[ 0.038533] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[ 0.038534] pcpu-alloc: [0] 0 1 2 3
[ 0.038557] Built 1 zonelists, mobility grouping on. Total pages: 2049060
[ 0.038558] Policy zone: Normal
[ 0.038559] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-51-generic root=UUID=0b8cac27-a007-4e7c-8291-f75bb37bc4f1 ro pci=nomsi,noaer quiet splash vt.handoff=7
[ 0.039008] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.039207] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.039246] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.042230] Calgary: detecting Calgary via BIOS EBDA area
[ 0.042231] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.062532] Memory: 7992932K/8326432K available (14339K kernel code, 2398K rwdata, 4956K rodata, 2716K init, 4988K bss, 333500K reserved, 0K cma-reserved)
[ 0.062538] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[ 0.062653] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.062664] Kernel/User page tables isolation: enabled
[ 0.062676] ftrace: allocating 44527 entries in 174 pages
[ 0.077065] rcu: Hierarchical RCU implementation.
[ 0.077066] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.077067] Tasks RCU enabled.
[ 0.077068] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.077068] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.079419] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.079687] random: crng done (trusting CPU's manufacturer)
[ 0.079702] vt handoff: transparent VT on vt#7
[ 0.079707] Console: colour dummy device 80x25
[ 0.079710] printk: console [tty0] enabled
[ 0.079724] ACPI: Core revision 20190816
[ 0.079814] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.079823] APIC: Switch to symmetric I/O mode setup
[ 0.079887] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.080266] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.099823] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2844ad58d03, max_idle_ns: 440795240760 ns
[ 0.099827] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.22 BogoMIPS (lpj=11174444)
[ 0.099828] pid_max: default: 32768 minimum: 301
[ 0.099855] LSM: Security Framework initializing
[ 0.099863] Yama: becoming mindful.
[ 0.099886] AppArmor: AppArmor initialized
[ 0.099924] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.099937] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.099948] *** VALIDATE tmpfs ***
[ 0.100065] *** VALIDATE proc ***
[ 0.100105] *** VALIDATE cgroup1 ***
[ 0.100106] *** VALIDATE cgroup2 ***
[ 0.100153] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.100166] process: using mwait in idle threads
[ 0.100168] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.100169] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.100170] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.100171] Spectre V2 : Mitigation: Full generic retpoline
[ 0.100172] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.100172] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.100173] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.100174] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.100177] SRBDS: Mitigation: Microcode
[ 0.100178] MDS: Mitigation: Clear CPU buffers
[ 0.100326] Freeing SMP alternatives memory: 40K
[ 0.103113] smpboot: CPU0: Intel(R) Core(TM) i5-4440S CPU @ 2.80GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.103210] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.103224] ... version: 3
[ 0.103224] ... bit width: 48
[ 0.103225] ... generic registers: 8
[ 0.103225] ... value mask: 0000ffffffffffff
[ 0.103226] ... max period: 00007fffffffffff
[ 0.103226] ... fixed-purpose events: 3
[ 0.103227] ... event mask: 00000007000000ff
[ 0.103253] rcu: Hierarchical SRCU implementation.
[ 0.103824] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.103824] smp: Bringing up secondary CPUs ...
[ 0.103824] x86: Booting SMP configuration:
[ 0.103824] .... node #0, CPUs: #1 #2 #3
[ 0.105501] smp: Brought up 1 node, 4 CPUs
[ 0.105501] smpboot: Max logical packages: 1
[ 0.105501] smpboot: Total of 4 processors activated (22348.88 BogoMIPS)
[ 0.105501] devtmpfs: initialized
[ 0.105501] x86/mm: Memory block size: 128MB
[ 0.108286] PM: Registering ACPI NVS region [mem 0xca1d7000-0xca1ddfff] (28672 bytes)
[ 0.108286] PM: Registering ACPI NVS region [mem 0xdd9f7000-0xddf32fff] (5488640 bytes)
[ 0.108286] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.108286] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.108286] pinctrl core: initialized pinctrl subsystem
[ 0.108286] PM: RTC time: 07:42:25, date: 2020-10-20
[ 0.108286] NET: Registered protocol family 16
[ 0.108286] audit: initializing netlink subsys (disabled)
[ 0.108286] audit: type=2000 audit(1603179745.028:1): state=initialized audit_enabled=0 res=1
[ 0.108286] EISA bus registered
[ 0.108286] cpuidle: using governor ladder
[ 0.108286] cpuidle: using governor menu
[ 0.108286] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.108286] ACPI: bus type PCI registered
[ 0.108286] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.108286] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.108286] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.108286] PCI: Using configuration type 1 for base access
[ 0.108286] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.108286] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.109018] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.109018] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.109018] ACPI: Added _OSI(Module Device)
[ 0.109018] ACPI: Added _OSI(Processor Device)
[ 0.109018] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.109018] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.109018] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.109018] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.109018] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.121557] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.122910] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.123515] ACPI: Dynamic OEM Table Load:
[ 0.123520] ACPI: SSDT 0xFFFF9D0E55197000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.124488] ACPI: Dynamic OEM Table Load:
[ 0.124491] ACPI: SSDT 0xFFFF9D0E5519C800 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.125504] ACPI: Dynamic OEM Table Load:
[ 0.125507] ACPI: SSDT 0xFFFF9D0E55347A00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.127124] ACPI: Interpreter enabled
[ 0.127149] ACPI: (supports S0 S3 S4 S5)
[ 0.127150] ACPI: Using IOAPIC for interrupt routing
[ 0.127177] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.127466] ACPI: Enabled 9 GPEs in block 00 to 3F
[ 0.136673] ACPI: Power Resource [FN00] (off)
[ 0.136746] ACPI: Power Resource [FN01] (off)
[ 0.136818] ACPI: Power Resource [FN02] (off)
[ 0.136887] ACPI: Power Resource [FN03] (off)
[ 0.136955] ACPI: Power Resource [FN04] (off)
[ 0.137782] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.137787] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments HPX-Type3]
[ 0.137969] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.138428] PCI host bridge to bus 0000:00
[ 0.138430] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.138431] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.138432] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.138432] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.138433] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.138434] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.138435] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.138435] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.138436] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.138437] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.138438] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.138446] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.138530] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.138565] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.138713] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.138731] pci 0000:00:14.0: reg 0x10: [mem 0xf7300000-0xf730ffff 64bit]
[ 0.138783] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.138861] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.138880] pci 0000:00:16.0: reg 0x10: [mem 0xf731a000-0xf731a00f 64bit]
[ 0.138934] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.139008] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.139026] pci 0000:00:1a.0: reg 0x10: [mem 0xf7318000-0xf73183ff]
[ 0.139099] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.139180] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.139197] pci 0000:00:1b.0: reg 0x10: [mem 0xf7310000-0xf7313fff 64bit]
[ 0.139258] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.139334] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.139404] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.139532] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[ 0.139759] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.139892] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.139962] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.140094] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.140113] pci 0000:00:1d.0: reg 0x10: [mem 0xf7317000-0xf73173ff]
[ 0.140187] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.140273] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
[ 0.140439] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.140453] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
[ 0.140458] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
[ 0.140464] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
[ 0.140469] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
[ 0.140475] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.140481] pci 0000:00:1f.2: reg 0x24: [mem 0xf7316000-0xf73167ff]
[ 0.140510] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.140581] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.140596] pci 0000:00:1f.3: reg 0x10: [mem 0xf7315000-0xf73150ff 64bit]
[ 0.140613] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.140725] pci 0000:01:00.0: [10de:1049] type 00 class 0x030000
[ 0.140739] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.140747] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.140755] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.140760] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.140766] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.140855] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
[ 0.140866] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.140968] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.140969] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.140971] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.140973] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.141026] acpiphp: Slot [1] registered
[ 0.141030] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.141099] pci 0000:03:00.0: [10ec:8821] type 00 class 0x028000
[ 0.141130] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.141160] pci 0000:03:00.0: reg 0x18: [mem 0xf7200000-0xf7203fff 64bit]
[ 0.141280] pci 0000:03:00.0: supports D1 D2
[ 0.141281] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.141405] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.141407] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.141409] pci 0000:00:1c.1: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.141471] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.141499] pci 0000:04:00.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.141525] pci 0000:04:00.0: reg 0x18: [mem 0xf7100000-0xf7100fff 64bit]
[ 0.141541] pci 0000:04:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.141639] pci 0000:04:00.0: supports D1 D2
[ 0.141640] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.141746] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.141748] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
[ 0.141751] pci 0000:00:1c.2: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.141754] pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.142464] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.142522] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.142577] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.142633] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.142688] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.142743] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.142798] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.142853] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.143269] iommu: Default domain type: Translated
[ 0.143269] SCSI subsystem initialized
[ 0.143269] libata version 3.00 loaded.
[ 0.143269] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.143269] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.143269] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.143269] vgaarb: loaded
[ 0.143269] ACPI: bus type USB registered
[ 0.143269] usbcore: registered new interface driver usbfs
[ 0.143269] usbcore: registered new interface driver hub
[ 0.143269] usbcore: registered new device driver usb
[ 0.143269] pps_core: LinuxPPS API ver. 1 registered
[ 0.143269] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.143269] PTP clock support registered
[ 0.143269] EDAC MC: Ver: 3.0.0
[ 0.143269] PCI: Using ACPI for IRQ routing
[ 0.144991] PCI: pci_cache_line_size set to 64 bytes
[ 0.145027] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.145028] e820: reserve RAM buffer [mem 0xca1d7000-0xcbffffff]
[ 0.145028] e820: reserve RAM buffer [mem 0xca62b000-0xcbffffff]
[ 0.145029] e820: reserve RAM buffer [mem 0xdd7d9000-0xdfffffff]
[ 0.145030] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[ 0.145031] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.145105] NetLabel: Initializing
[ 0.145106] NetLabel: domain hash size = 128
[ 0.145106] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.145118] NetLabel: unlabeled traffic allowed by default
[ 0.145128] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.145128] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.145128] clocksource: Switched to clocksource tsc-early
[ 0.155023] *** VALIDATE bpf ***
[ 0.155084] VFS: Disk quotas dquot_6.6.0
[ 0.155095] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.155113] *** VALIDATE ramfs ***
[ 0.155117] *** VALIDATE hugetlbfs ***
[ 0.155187] AppArmor: AppArmor Filesystem Enabled
[ 0.155207] pnp: PnP ACPI init
[ 0.155307] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.155311] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.155508] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.155509] system 00:01: [io 0xffff] has been reserved
[ 0.155510] system 00:01: [io 0xffff] has been reserved
[ 0.155511] system 00:01: [io 0xffff] has been reserved
[ 0.155512] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.155513] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.155514] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.155515] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.155516] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.155517] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.155520] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.155538] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.155584] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.155587] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.155675] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.155678] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.155723] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.155726] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.156206] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.156207] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.156208] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.156209] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.156210] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.156211] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.156212] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.156213] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.156214] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.156216] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.156217] system 00:06: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.156218] system 00:06: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.156220] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.156530] pnp: PnP ACPI: found 7 devices
[ 0.157491] thermal_sys: Registered thermal governor 'fair_share'
[ 0.157491] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.157492] thermal_sys: Registered thermal governor 'step_wise'
[ 0.157492] thermal_sys: Registered thermal governor 'user_space'
[ 0.157493] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.163597] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.163623] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.163625] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.163626] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 0.163633] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe0000000-0xe01fffff]
[ 0.163638] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe0200000-0xe03fffff 64bit pref]
[ 0.163639] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.163641] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.163643] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.163645] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.163647] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.163649] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.163651] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.163654] pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xe01fffff]
[ 0.163656] pci 0000:00:1c.0: bridge window [mem 0xe0200000-0xe03fffff 64bit pref]
[ 0.163660] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.163662] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.163665] pci 0000:00:1c.1: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.163671] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.163672] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
[ 0.163675] pci 0000:00:1c.2: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.163678] pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.163682] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.163683] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.163684] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.163685] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.163686] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.163687] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.163688] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.163688] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.163689] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.163690] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
[ 0.163691] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.163692] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.163692] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.163693] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.163694] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe01fffff]
[ 0.163695] pci_bus 0000:02: resource 2 [mem 0xe0200000-0xe03fffff 64bit pref]
[ 0.163696] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.163697] pci_bus 0000:03: resource 1 [mem 0xf7200000-0xf72fffff]
[ 0.163698] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.163698] pci_bus 0000:04: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.163699] pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.163807] NET: Registered protocol family 2
[ 0.163935] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.163973] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.164082] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.164186] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.164213] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.164234] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.164272] NET: Registered protocol family 1
[ 0.164275] NET: Registered protocol family 44
[ 0.187914] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x662 took 22914 usecs
[ 0.211910] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 23420 usecs
[ 0.211922] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.211928] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.211936] PCI: CLS 64 bytes, default 64
[ 0.211987] Trying to unpack rootfs image as initramfs...
[ 0.379727] Freeing initrd memory: 90224K
[ 0.379764] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.379766] software IO TLB: mapped [mem 0xd97d9000-0xdd7d9000] (64MB)
[ 0.379952] check: Scanning for low memory corruption every 60 seconds
[ 0.380299] Initialise system trusted keyrings
[ 0.380307] Key type blacklist registered
[ 0.380325] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.381388] zbud: loaded
[ 0.381676] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.381794] fuse: init (API version 7.31)
[ 0.381805] *** VALIDATE fuse ***
[ 0.381807] *** VALIDATE fuse ***
[ 0.381879] Platform Keyring initialized
[ 0.385356] Key type asymmetric registered
[ 0.385357] Asymmetric key parser 'x509' registered
[ 0.385363] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.385387] io scheduler mq-deadline registered
[ 0.385933] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.385975] vesafb: mode is 1600x1200x32, linelength=6400, pages=0
[ 0.385975] vesafb: scrolling: redraw
[ 0.385976] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.385991] vesafb: framebuffer at 0xf1000000, mapped to 0x00000000140aa932, using 7552k, total 7552k
[ 0.386017] fbcon: Deferring console take-over
[ 0.386018] fb0: VESA VGA frame buffer device
[ 0.386028] intel_idle: MWAIT substates: 0x42120
[ 0.386028] intel_idle: v0.4.1 model 0x3C
[ 0.386169] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.386290] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.386305] ACPI: Power Button [PWRB]
[ 0.386329] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.386350] ACPI: Power Button [PWRF]
[ 0.386941] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.386942] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.387160] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.387161] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.387345] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.388740] Linux agpgart interface v0.103
[ 0.390213] loop: module loaded
[ 0.390338] libphy: Fixed MDIO Bus: probed
[ 0.390339] tun: Universal TUN/TAP device driver, 1.6
[ 0.390355] PPP generic driver version 2.4.2
[ 0.390387] VFIO - User Level meta-driver version: 0.3
[ 0.390522] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.390525] ehci-pci: EHCI PCI platform driver
[ 0.390624] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.390628] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.390637] ehci-pci 0000:00:1a.0: debug port 2
[ 0.394524] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.394534] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7318000
[ 0.407868] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.407902] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.407903] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.407904] usb usb1: Product: EHCI Host Controller
[ 0.407905] usb usb1: Manufacturer: Linux 5.4.0-51-generic ehci_hcd
[ 0.407905] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.408064] hub 1-0:1.0: USB hub found
[ 0.408070] hub 1-0:1.0: 2 ports detected
[ 0.408275] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.408279] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.408287] ehci-pci 0000:00:1d.0: debug port 2
[ 0.412193] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.412199] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7317000
[ 0.427864] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.427898] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.427899] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.427900] usb usb2: Product: EHCI Host Controller
[ 0.427901] usb usb2: Manufacturer: Linux 5.4.0-51-generic ehci_hcd
[ 0.427902] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.428056] hub 2-0:1.0: USB hub found
[ 0.428060] hub 2-0:1.0: 2 ports detected
[ 0.428178] ehci-platform: EHCI generic platform driver
[ 0.428186] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.428189] ohci-pci: OHCI PCI platform driver
[ 0.428195] ohci-platform: OHCI generic platform driver
[ 0.428200] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.428298] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.428302] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.429339] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 0.429342] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.429421] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.429422] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.429423] usb usb3: Product: xHCI Host Controller
[ 0.429424] usb usb3: Manufacturer: Linux 5.4.0-51-generic xhci-hcd
[ 0.429424] usb usb3: SerialNumber: 0000:00:14.0
[ 0.429578] hub 3-0:1.0: USB hub found
[ 0.429588] hub 3-0:1.0: 10 ports detected
[ 0.431050] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.431052] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.431053] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.431074] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.431075] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.431076] usb usb4: Product: xHCI Host Controller
[ 0.431076] usb usb4: Manufacturer: Linux 5.4.0-51-generic xhci-hcd
[ 0.431077] usb usb4: SerialNumber: 0000:00:14.0
[ 0.431231] hub 4-0:1.0: USB hub found
[ 0.431236] hub 4-0:1.0: 2 ports detected
[ 0.431428] i8042: PNP: No PS/2 controller found.
[ 0.431598] mousedev: PS/2 mouse device common for all mice
[ 0.431713] rtc_cmos 00:02: RTC can wake from S4
[ 0.431889] rtc_cmos 00:02: registered as rtc0
[ 0.431899] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.431903] i2c /dev entries driver
[ 0.431927] device-mapper: uevent: version 1.0.3
[ 0.432007] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 0.432021] platform eisa.0: Probing EISA bus 0
[ 0.432022] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.432023] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.432024] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.432024] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.432025] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.432026] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.432026] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.432027] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.432028] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.432028] platform eisa.0: EISA: Detected 0 cards
[ 0.432032] intel_pstate: Intel P-state driver initializing
[ 0.432206] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.432243] drop_monitor: Initializing network drop monitor service
[ 0.432374] NET: Registered protocol family 10
[ 0.438038] Segment Routing with IPv6
[ 0.438058] NET: Registered protocol family 17
[ 0.438087] Key type dns_resolver registered
[ 0.438317] RAS: Correctable Errors collector initialized.
[ 0.438339] microcode: sig=0x306c3, pf=0x2, revision=0x28
[ 0.438396] microcode: Microcode Update Driver: v2.2.
[ 0.438399] IPI shorthand broadcast: enabled
[ 0.438408] sched_clock: Marking stable (438157351, 236139)->(445580945, -7187455)
[ 0.438478] registered taskstats version 1
[ 0.438485] Loading compiled-in X.509 certificates
[ 0.439194] Loaded X.509 cert 'Build time autogenerated kernel key: 78eea2c53913ffa3ccc955e782299d39f3ab06bc'
[ 0.439214] zswap: loaded using pool lzo/zbud
[ 0.439271] Key type ._fscrypt registered
[ 0.439271] Key type .fscrypt registered
[ 0.444120] Key type big_key registered
[ 0.446364] Key type encrypted registered
[ 0.446366] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.446371] ima: No TPM chip found, activating TPM-bypass!
[ 0.446379] ima: Allocated hash algorithm: sha1
[ 0.446384] ima: No architecture policies found
[ 0.446389] evm: Initialising EVM extended attributes:
[ 0.446390] evm: security.selinux
[ 0.446390] evm: security.SMACK64
[ 0.446391] evm: security.SMACK64EXEC
[ 0.446391] evm: security.SMACK64TRANSMUTE
[ 0.446391] evm: security.SMACK64MMAP
[ 0.446392] evm: security.apparmor
[ 0.446392] evm: security.ima
[ 0.446392] evm: security.capability
[ 0.446393] evm: HMAC attrs: 0x1
[ 0.446864] PM: Magic number: 8:951:723
[ 0.446873] block loop3: hash matches
[ 0.446967] rtc_cmos 00:02: setting system clock to 2020-10-20T07:42:26 UTC (1603179746)
[ 0.447820] Freeing unused decrypted memory: 2040K
[ 0.448170] Freeing unused kernel image memory: 2716K
[ 0.487913] Write protecting the kernel read-only data: 22528k
[ 0.488316] Freeing unused kernel image memory: 2008K
[ 0.488478] Freeing unused kernel image memory: 1188K
[ 0.496300] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.496301] x86/mm: Checking user space page tables
[ 0.503543] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.503544] Run /init as init process
[ 0.620556] IPMI message handler: version 39.2
[ 0.620840] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20190816/utaddress-204)
[ 0.620846] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.621502] ipmi device interface
[ 0.622025] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.622281] ahci 0000:00:1f.2: version 3.0
[ 0.622487] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-204)
[ 0.622494] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.622776] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-204)
[ 0.622779] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-204)
[ 0.622784] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.622860] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-204)
[ 0.622863] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-204)
[ 0.622866] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.622867] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 0.623166] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 0.623454] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x31 impl SATA mode
[ 0.623456] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems
[ 0.625418] cryptd: max_cpu_qlen set to 1000
[ 0.630192] AVX2 version of gcm_enc/dec engaged.
[ 0.630193] AES CTR mode by8 optimization enabled
[ 0.634816] libphy: r8169: probed
[ 0.634989] r8169 0000:04:00.0 eth0: RTL8168g/8111g, e0:3f:49:e6:62:7d, XID 4c0, IRQ 18
[ 0.634990] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.637458] r8169 0000:04:00.0 enp4s0: renamed from eth0
[ 0.640745] nvidia: loading out-of-tree module taints kernel.
[ 0.640751] nvidia: module license 'NVIDIA' taints kernel.
[ 0.640751] Disabling lock debugging due to kernel taint
[ 0.648660] scsi host0: ahci
[ 0.648847] scsi host1: ahci
[ 0.648991] scsi host2: ahci
[ 0.649089] scsi host3: ahci
[ 0.649192] scsi host4: ahci
[ 0.649270] scsi host5: ahci
[ 0.649318] ata1: SATA max UDMA/133 abar m2048@0xf7316000 port 0xf7316100 irq 19
[ 0.649319] ata2: DUMMY
[ 0.649319] ata3: DUMMY
[ 0.649320] ata4: DUMMY
[ 0.649321] ata5: SATA max UDMA/133 abar m2048@0xf7316000 port 0xf7316300 irq 19
[ 0.649323] ata6: SATA max UDMA/133 abar m2048@0xf7316000 port 0xf7316380 irq 19
[ 0.656008] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 0.661295] nvidia-nvlink: Nvlink Core is being initialized, major device number 240
[ 0.661609] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 0.661687] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.138 Thu May 14 01:01:53 PDT 2020 (using threaded interrupts)
[ 0.663178] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.138 Thu May 14 04:02:47 PDT 2020
[ 0.663746] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 0.663747] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 0.743892] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.763869] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.763873] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 0.900234] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
[ 0.900236] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.900456] hub 1-1:1.0: USB hub found
[ 0.900571] hub 1-1:1.0: 4 ports detected
[ 0.912432] usb 3-1: New USB device found, idVendor=2013, idProduct=0245, bcdDevice= 1.00
[ 0.912433] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 0.912434] usb 3-1: Product: PCTV 73e SE
[ 0.912435] usb 3-1: Manufacturer: PCTV Systems
[ 0.912435] usb 3-1: SerialNumber: 0000000M03J1417
[ 0.920233] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
[ 0.920235] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.920487] hub 2-1:1.0: USB hub found
[ 0.920571] hub 2-1:1.0: 6 ports detected
[ 0.963870] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.963884] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.963897] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.964396] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 0.964404] No Local Variables are initialized for Method [_GTF]
[ 0.964405] No Arguments are initialized for method [_GTF]
[ 0.964407] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 0.964957] ata1.00: ATA-8: TOSHIBA DT01ACA100, MS2OA7L0, max UDMA/133
[ 0.964959] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 0.965149] ata6.00: ATA-9: SSD PLUS 480GB, Z31000RL, max UDMA/133
[ 0.965150] ata6.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 0.965721] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 0.965728] No Local Variables are initialized for Method [_GTF]
[ 0.965729] No Arguments are initialized for method [_GTF]
[ 0.965730] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 0.966127] ata1.00: configured for UDMA/133
[ 0.966246] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 0.966253] No Local Variables are initialized for Method [_GTF]
[ 0.966254] No Arguments are initialized for method [_GTF]
[ 0.966255] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 0.966262] ata5.00: ATAPI: ASUS DVD RAM GHB1N, AS00, max UDMA/133
[ 0.966284] scsi 0:0:0:0: Direct-Access ATA TOSHIBA DT01ACA1 A7L0 PQ: 0 ANSI: 5
[ 0.966422] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.966424] ata6.00: configured for UDMA/133
[ 0.966525] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 0.966527] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.966537] sd 0:0:0:0: [sda] Write Protect is off
[ 0.966538] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.966552] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.967804] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 0.967811] No Local Variables are initialized for Method [_GTF]
[ 0.967812] No Arguments are initialized for method [_GTF]
[ 0.967814] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 0.967822] ata5.00: configured for UDMA/133
[ 0.969894] scsi 4:0:0:0: CD-ROM ASUS DVD RAM GHB1N AS00 PQ: 0 ANSI: 5
[ 1.032561] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.032563] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.039866] usb 3-2: new high-speed USB device number 3 using xhci_hcd
[ 1.048047] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.048133] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 1.048351] scsi 5:0:0:0: Direct-Access ATA SSD PLUS 480GB 00RL PQ: 0 ANSI: 5
[ 1.048630] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 1.048717] sd 5:0:0:0: [sdb] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[ 1.048738] sd 5:0:0:0: [sdb] Write Protect is off
[ 1.048740] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.048767] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.051537] sda: sda5 sda6 sda8
[ 1.051829] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.080516] sdb: sdb1 sdb2 sdb3 sdb4
[ 1.080841] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 1.188716] usb 3-2: New USB device found, idVendor=1058, idProduct=0910, bcdDevice= 1.06
[ 1.188717] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.188718] usb 3-2: Product: External HDD
[ 1.188719] usb 3-2: Manufacturer: Western Digital
[ 1.188720] usb 3-2: SerialNumber: 574341533837333531333337
[ 1.315835] usb 3-4: new high-speed USB device number 4 using xhci_hcd
[ 1.391864] tsc: Refined TSC clocksource calibration: 2793.531 MHz
[ 1.391868] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x284461bc4f9, max_idle_ns: 440795228872 ns
[ 1.391891] clocksource: Switched to clocksource tsc
[ 1.465131] usb 3-4: New USB device found, idVendor=05e3, idProduct=0606, bcdDevice= 7.02
[ 1.465133] usb 3-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.465134] usb 3-4: Product: USB2.0 Hub
[ 1.466119] hub 3-4:1.0: USB hub found
[ 1.466398] hub 3-4:1.0: 4 ports detected
[ 1.595858] usb 3-5: new full-speed USB device number 5 using xhci_hcd
[ 1.745317] usb 3-5: New USB device found, idVendor=13d3, idProduct=3414, bcdDevice= 2.00
[ 1.745318] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.745319] usb 3-5: Product: Bluetooth Radio
[ 1.745320] usb 3-5: Manufacturer: Realtek
[ 1.745321] usb 3-5: SerialNumber: 00e04c000001
[ 1.823864] usb 3-4.2: new high-speed USB device number 6 using xhci_hcd
[ 1.924763] usb 3-4.2: New USB device found, idVendor=1908, idProduct=2310, bcdDevice= 1.00
[ 1.924765] usb 3-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.924766] usb 3-4.2: Product: USB2.0 PC CAMERA
[ 1.924767] usb 3-4.2: Manufacturer: Generic
[ 1.924768] usb 3-4.2: SerialNumber: 20100331010203
[ 2.051863] usb 3-6: new high-speed USB device number 7 using xhci_hcd
[ 2.201643] usb 3-6: New USB device found, idVendor=058f, idProduct=6366, bcdDevice= 1.00
[ 2.201645] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.201646] usb 3-6: Product: Flash Card Reader/Writer
[ 2.201647] usb 3-6: Manufacturer: Generic
[ 2.201647] usb 3-6: SerialNumber: 058F63666479
[ 2.206122] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 2.206314] scsi host6: usb-storage 3-2:1.0
[ 2.206399] usb-storage 3-6:1.0: USB Mass Storage device detected
[ 2.206477] scsi host7: usb-storage 3-6:1.0
[ 2.206534] usbcore: registered new interface driver usb-storage
[ 2.207573] usbcore: registered new interface driver uas
[ 2.279866] usb 3-4.3: new low-speed USB device number 8 using xhci_hcd
[ 2.384364] usb 3-4.3: New USB device found, idVendor=046d, idProduct=c016, bcdDevice= 3.40
[ 2.384366] usb 3-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.384367] usb 3-4.3: Product: Optical USB Mouse
[ 2.384368] usb 3-4.3: Manufacturer: Logitech
[ 2.467863] usb 3-4.4: new low-speed USB device number 9 using xhci_hcd
[ 2.574162] usb 3-4.4: New USB device found, idVendor=04ca, idProduct=0020, bcdDevice= 1.09
[ 2.574164] usb 3-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.574165] usb 3-4.4: Product: USB Keyboard
[ 2.574166] usb 3-4.4: Manufacturer: LITEON Technology
[ 2.585523] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.595344] usbcore: registered new interface driver usbhid
[ 2.595345] usbhid: USB HID core driver
[ 2.597814] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.3/3-4.3:1.0/0003:046D:C016.0001/input/input2
[ 2.597892] hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-4.3/input0
[ 2.598010] input: LITEON Technology USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4:1.0/0003:04CA:0020.0002/input/input3
[ 2.656043] hid-generic 0003:04CA:0020.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:00:14.0-4.4/input0
[ 2.656154] input: LITEON Technology USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4:1.1/0003:04CA:0020.0003/input/input4
[ 2.715998] input: LITEON Technology USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4:1.1/0003:04CA:0020.0003/input/input5
[ 2.716152] hid-generic 0003:04CA:0020.0003: input,hidraw2: USB HID v1.10 Device [LITEON Technology USB Keyboard] on usb-0000:00:14.0-4.4/input1
[ 2.820239] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.029666] systemd[1]: Inserted module 'autofs4'
[ 3.043127] systemd[1]: systemd 245.4-4ubuntu3.2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 3.059906] systemd[1]: Detected architecture x86-64.
[ 3.080341] systemd[1]: Set hostname to <robert-M11AD>.
[ 3.192776] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 3.216320] scsi 6:0:0:0: Direct-Access WD 5000AAK External 1.06 PQ: 0 ANSI: 0
[ 3.216745] scsi 7:0:0:0: Direct-Access Generic- Multiple Reader 1.11 PQ: 0 ANSI: 4
[ 3.216949] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 3.217080] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 3.217346] sd 6:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 3.217801] sd 6:0:0:0: [sdd] Write Protect is off
[ 3.217802] sd 6:0:0:0: [sdd] Mode Sense: 00 00 00 00
[ 3.218112] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[ 3.218258] sd 6:0:0:0: [sdd] Asking for cache data failed
[ 3.218260] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 3.244796] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 3.246540] systemd[1]: /lib/systemd/system/gpsd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/gpsd.sock → /run/gpsd.sock; please update the unit file accordingly.
[ 3.275541] systemd[1]: Created slice system-modprobe.slice.
[ 3.275724] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.275884] systemd[1]: Created slice User and Session Slice.
[ 3.275936] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.276103] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.276142] systemd[1]: Reached target User and Group Name Lookups.
[ 3.276152] systemd[1]: Reached target Remote File Systems.
[ 3.276160] systemd[1]: Reached target Slices.
[ 3.277606] systemd[1]: Listening on Syslog Socket.
[ 3.277677] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.277718] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 3.277867] systemd[1]: Listening on Journal Audit Socket.
[ 3.277935] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.278014] systemd[1]: Listening on Journal Socket.
[ 3.278091] systemd[1]: Listening on udev Control Socket.
[ 3.278153] systemd[1]: Listening on udev Kernel Socket.
[ 3.278907] systemd[1]: Mounting Huge Pages File System...
[ 3.279809] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.279942] sdd: sdd1
[ 3.280863] systemd[1]: Mounting Kernel Debug File System...
[ 3.281233] sd 6:0:0:0: [sdd] Attached SCSI disk
[ 3.281668] systemd[1]: Mounting Kernel Trace File System...
[ 3.282793] systemd[1]: Starting Journal Service...
[ 3.283557] systemd[1]: Starting Set the console keyboard layout...
[ 3.284447] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 3.284515] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 3.285128] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 3.285153] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 3.288442] systemd[1]: Starting Load Kernel Modules...
[ 3.289104] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.289789] systemd[1]: Starting udev Coldplug all Devices...
[ 3.290465] systemd[1]: Starting Uncomplicated firewall...
[ 3.291112] systemd[1]: Started Read required files in advance.
[ 3.292684] systemd[1]: Mounted Huge Pages File System.
[ 3.292861] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.293074] systemd[1]: Mounted Kernel Debug File System.
[ 3.293233] systemd[1]: Mounted Kernel Trace File System.
[ 3.293715] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 3.295282] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro
[ 3.297430] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 3.298151] systemd[1]: Activating swap /swapfile...
[ 3.300566] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 3.300607] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 3.301518] systemd[1]: Starting Load/Save Random Seed...
[ 3.303254] systemd[1]: Starting Create System Users...
[ 3.307131] systemd[1]: Finished Uncomplicated firewall.
[ 3.331982] systemd[1]: Finished Load/Save Random Seed.
[ 3.333047] lp: driver loaded but no devices found
[ 3.344289] systemd[1]: Finished Create System Users.
[ 3.345116] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.353021] ppdev: user-space parallel port driver
[ 3.361673] systemd[1]: Finished Load Kernel Modules.
[ 3.362584] systemd[1]: Mounting FUSE Control File System...
[ 3.363390] systemd[1]: Mounting Kernel Configuration File System...
[ 3.364969] systemd[1]: Starting Apply Kernel Variables...
[ 3.366670] systemd[1]: Mounted FUSE Control File System.
[ 3.366796] systemd[1]: Mounted Kernel Configuration File System.
[ 3.372327] systemd[1]: Finished Set the console keyboard layout.
[ 3.376072] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
[ 3.376164] systemd[1]: Activated swap /swapfile.
[ 3.376221] systemd[1]: Reached target Swap.
[ 3.380245] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 3.380382] systemd[1]: Reached target Local File Systems (Pre).
[ 3.390263] systemd[1]: Mounting Mount unit for chromium, revision 1328...
[ 3.394079] systemd[1]: Mounting Mount unit for chromium, revision 1350...
[ 3.399088] systemd[1]: Mounting Mount unit for core, revision 10126...
[ 3.403030] systemd[1]: Mounting Mount unit for core, revision 9993...
[ 3.408158] systemd[1]: Mounting Mount unit for core18, revision 1880...
[ 3.412588] systemd[1]: Mounting Mount unit for core18, revision 1885...
[ 3.415622] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1506...
[ 3.419821] systemd[1]: Mounting Mount unit for pulsemixer, revision 250...
[ 3.421533] systemd[1]: Mounting Mount unit for pulsemixer, revision 283...
[ 3.423801] systemd[1]: Mounting Mount unit for skype, revision 153...
[ 3.425056] systemd[1]: Mounting Mount unit for skype, revision 156...
[ 3.426502] systemd[1]: Mounting Mount unit for software-boutique, revision 39...
[ 3.430359] systemd[1]: Mounting Mount unit for software-boutique, revision 54...
[ 3.437473] systemd[1]: Mounting Mount unit for ubuntu-mate-welcome, revision 539...
[ 3.440624] systemd[1]: Mounting Mount unit for ubuntu-mate-welcome, revision 559...
[ 3.441495] systemd[1]: Starting udev Kernel Device Manager...
[ 3.441789] systemd[1]: Started Journal Service.
[ 3.453600] systemd-journald[334]: Received client request to flush runtime journal.
[ 3.930640] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 238
[ 3.961866] NVRM: failed to enable MSI. Therefore, using PCIe virtual-wire interrupts.
[ 3.983770] resource sanity check: requesting [mem 0x000e0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000e0000-0x000e3fff window]
[ 3.983910] caller os_map_kernel_space.part.0+0x100/0x140 [nvidia] mapping multiple BARs
[ 4.299581] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[ 4.299716] caller os_map_kernel_space.part.0+0x100/0x140 [nvidia] mapping multiple BARs
[ 4.600877] asus_wmi: ASUS WMI generic driver loaded
[ 4.602876] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[ 4.602876] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 4.602877] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 4.602877] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 4.675358] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 4.677232] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 4.719359] asus_wmi: Initialization: 0x0
[ 4.719397] asus_wmi: BIOS WMI version: 0.9
[ 4.719456] asus_wmi: SFUN value: 0x0
[ 4.719458] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[ 4.720212] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input6
[ 5.253090] kvm: disabled by bios
[ 5.389789] kvm: disabled by bios
[ 5.419404] rtl8821ae: Using firmware rtlwifi/rtl8821aefw_29.bin
[ 5.419408] rtl8821ae: Using firmware rtlwifi/rtl8821aefw_wowlan.bin
[ 5.423804] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 5.424133] rtlwifi: rtlwifi: wireless switch is on
[ 5.442554] kvm: disabled by bios
[ 5.447437] intel_rapl_common: Found RAPL domain package
[ 5.447438] intel_rapl_common: Found RAPL domain core
[ 5.447439] intel_rapl_common: Found RAPL domain dram
[ 5.454122] rtl8821ae 0000:03:00.0 wlp3s0: renamed from wlan0
[ 5.491018] kvm: disabled by bios
[ 5.495031] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 5.495036] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 5.511872] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 5.511874] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.511875] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 5.511876] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 5.511877] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
[ 5.511877] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 5.511878] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 5.511879] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 5.511880] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 5.536913] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 5.536961] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 5.536998] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 5.537034] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 5.537068] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 5.751013] mc: Linux media interface: v0.10
[ 5.758395] Bluetooth: Core ver 2.22
[ 5.758408] NET: Registered protocol family 31
[ 5.758408] Bluetooth: HCI device and connection manager initialized
[ 5.758411] Bluetooth: HCI socket layer initialized
[ 5.758413] Bluetooth: L2CAP socket layer initialized
[ 5.758415] Bluetooth: SCO socket layer initialized
[ 5.766434] videodev: Linux video capture interface: v2.00
[ 5.799843] usbcore: registered new interface driver btusb
[ 5.804826] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000a lmp_ver=06 lmp_subver=8821
[ 5.805763] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 5.805765] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821a_fw.bin
[ 5.806921] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821a_config.bin
[ 5.806938] bluetooth hci0: Direct firmware load for rtl_bt/rtl8821a_config.bin failed with error -2
[ 5.806944] Bluetooth: hci0: RTL: cfg_sz -2, total sz 17428
[ 5.816298] usbcore: registered new interface driver snd-usb-audio
[ 5.822985] dvb-usb: found a 'Pinnacle PCTV 73e SE' in cold state, will try to load a firmware
[ 5.825047] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 5.828208] uvcvideo: Found UVC 1.00 device USB2.0 PC CAMERA (1908:2310)
[ 5.829153] uvcvideo 3-4.2:1.0: Entity type for entity Processing 2 was not initialized!
[ 5.829154] uvcvideo 3-4.2:1.0: Entity type for entity Camera 1 was not initialized!
[ 5.829211] input: USB2.0 PC CAMERA: USB2.0 PC CAM as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input12
[ 5.829269] usbcore: registered new interface driver uvcvideo
[ 5.829270] USB Video Class driver (1.1.1)
[ 5.874545] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
[ 5.920506] audit: type=1400 audit(1603179751.968:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=922 comm="apparmor_parser"
[ 5.924299] audit: type=1400 audit(1603179751.972:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=932 comm="apparmor_parser"
[ 5.927077] audit: type=1400 audit(1603179751.972:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=920 comm="apparmor_parser"
[ 5.927080] audit: type=1400 audit(1603179751.972:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=920 comm="apparmor_parser"
[ 5.930686] audit: type=1400 audit(1603179751.976:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=921 comm="apparmor_parser"
[ 5.930689] audit: type=1400 audit(1603179751.976:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=921 comm="apparmor_parser"
[ 5.930690] audit: type=1400 audit(1603179751.976:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=921 comm="apparmor_parser"
[ 5.933934] audit: type=1400 audit(1603179751.980:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=938 comm="apparmor_parser"
[ 5.934086] audit: type=1400 audit(1603179751.980:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=935 comm="apparmor_parser"
[ 5.936668] audit: type=1400 audit(1603179751.984:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/gpsd" pid=939 comm="apparmor_parser"
[ 5.975729] dib0700: firmware started successfully.
[ 6.077971] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 6.078016] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 6.304887] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.304888] Bluetooth: BNEP filters: protocol multicast
[ 6.304891] Bluetooth: BNEP socket layer initialized
[ 6.476755] Generic FE-GE Realtek PHY r8169-400:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE)
[ 6.483330] dvb-usb: found a 'Pinnacle PCTV 73e SE' in warm state.
[ 6.484514] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 6.484868] dvbdev: DVB: registering new adapter (Pinnacle PCTV 73e SE)
[ 6.484871] usb 3-1: media controller created
[ 6.485459] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[ 6.594769] Bluetooth: hci0: RTL: fw version 0x0e2fa041
[ 6.608703] r8169 0000:04:00.0 enp4s0: Link is Down
[ 6.816108] NET: Registered protocol family 38
[ 6.905233] NVRM: failed to enable MSI. Therefore, using PCIe virtual-wire interrupts.
[ 7.025512] usb 3-1: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[ 7.025517] dvbdev: dvb_create_media_entity: media entity 'DiBcom 7000PC' registered.
[ 7.140050] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[ 7.140185] caller os_map_kernel_space.part.0+0x100/0x140 [nvidia] mapping multiple BARs
[ 7.255632] dib0070: DiB0070: successfully identified
[ 7.295839] Registered IR keymap rc-dib0700-rc5
[ 7.295950] rc rc0: Pinnacle PCTV 73e SE as /devices/pci0000:00/0000:00:14.0/usb3/3-1/rc/rc0
[ 7.295992] rc rc0: lirc_dev: driver dib0700 registered at minor = 0, scancode receiver, no transmitter
[ 7.296026] input: Pinnacle PCTV 73e SE as /devices/pci0000:00/0000:00:14.0/usb3/3-1/rc/rc0/input15
[ 7.296067] dvb-usb: schedule remote query interval to 50 msecs.
[ 7.296069] dvb-usb: Pinnacle PCTV 73e SE successfully initialized and connected.
[ 7.296186] usbcore: registered new interface driver dvb_usb_dib0700
[ 8.261736] r8169 0000:04:00.0 enp4s0: Link is Up - 100Mbps/Full - flow control off
[ 8.261745] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[ 9.401103] Bluetooth: RFCOMM TTY layer initialized
[ 9.401108] Bluetooth: RFCOMM socket layer initialized
[ 9.401112] Bluetooth: RFCOMM ver 1.11
[ 10.625775] wlp3s0: authenticate with ac:3b:77:5f:5f:d0
[ 10.626093] wlp3s0: send auth to ac:3b:77:5f:5f:d0 (try 1/3)
[ 10.728218] wlp3s0: send auth to ac:3b:77:5f:5f:d0 (try 2/3)
[ 10.831908] wlp3s0: send auth to ac:3b:77:5f:5f:d0 (try 3/3)
[ 10.935857] wlp3s0: authentication with ac:3b:77:5f:5f:d0 timed out
[ 11.176271] wlp3s0: authenticate with ac:3b:77:5f:5f:d4
[ 11.176661] wlp3s0: send auth to ac:3b:77:5f:5f:d4 (try 1/3)
[ 11.283842] wlp3s0: send auth to ac:3b:77:5f:5f:d4 (try 2/3)
[ 11.387840] wlp3s0: send auth to ac:3b:77:5f:5f:d4 (try 3/3)
[ 11.491848] wlp3s0: authentication with ac:3b:77:5f:5f:d4 timed out
[ 14.721033] wlp3s0: authenticate with ac:3b:77:5f:5f:d4
[ 14.721393] wlp3s0: send auth to ac:3b:77:5f:5f:d4 (try 1/3)
[ 14.823867] wlp3s0: send auth to ac:3b:77:5f:5f:d4 (try 2/3)
[ 14.927909] wlp3s0: send auth to ac:3b:77:5f:5f:d4 (try 3/3)
[ 15.031858] wlp3s0: authentication with ac:3b:77:5f:5f:d4 timed out
[ 16.116294] wlp3s0: authenticate with ac:3b:77:5f:5f:d0
[ 16.116648] wlp3s0: send auth to ac:3b:77:5f:5f:d0 (try 1/3)
[ 16.118714] wlp3s0: authenticated
[ 16.119853] wlp3s0: associate with ac:3b:77:5f:5f:d0 (try 1/3)
[ 16.131425] wlp3s0: RX AssocResp from ac:3b:77:5f:5f:d0 (capab=0x411 status=0 aid=3)
[ 16.131621] wlp3s0: associated
[ 16.184791] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
