Bonjour,
Collage du
Boot-info :
boot-info-4ppa125 [20201026_1338]
============================== Boot Info Summary ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
=> Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sdc.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/ubuntu/grubx64.efi /efi/ubuntu/mmx64.efi
/efi/ubuntu/shimx64.efi
/efi/Microsoft/Boot/bootmgfw.efi
/efi/Microsoft/Boot/bootmgr.efi
/efi/Microsoft/Boot/memtest.efi
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Unknown
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 8 or 10
Boot files: /bootmgr /Windows/System32/winload.exe
sda3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 20.10
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdc1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 6.04
Boot sector info: Syslinux looks at sector 32800 of /dev/sdc1 for its
second stage. The integrity check of Syslinux failed.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg
/efi/BOOT/grubx64.efi /efi/BOOT/mmx64.efi /ldlinux.sys
================================ 2 OS detected =================================
OS#1: Ubuntu 20.10 on sda3
OS#2: Windows 8 or 10 on sda2
============================ Architecture/Host Info ============================
CPU architecture: 64-bit
Live-session OS is Ubuntu 64-bit (Ubuntu 20.04.1 LTS, focal, x86_64)
===================================== UEFI =====================================
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled.
efibootmgr -v
BootCurrent: 0004
Timeout: 2 seconds
BootOrder: 0002,0003,0000,0004
Boot0000* Windows Boot Manager HD(1,GPT,4583c150-30eb-41f6-8402-78774450c9b4,0x800,0x100000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...d................
Boot0002* ubuntu HD(1,GPT,4583c150-30eb-41f6-8402-78774450c9b4,0x800,0x100000)/File(\EFI\ubuntu\shimx64.efi)
Boot0003* ubuntu HD(1,GPT,4583c150-30eb-41f6-8402-78774450c9b4,0x800,0x100000)/File(\EFI\Ubuntu\grubx64.efi)
Boot0004* UEFI: USB DISK 2.0 PMAP PciRoot(0x0)/Pci(0x1d,0x0)/USB(1,0)/USB(3,0)/HD(1,MBR,0x4c61e4,0x800,0x39d1800)..BO
d41d8cd98f00b204e9800998ecf8427e sda1/Boot/bootx64.efi
d41d8cd98f00b204e9800998ecf8427e sda1/Boot/fbx64.efi
d41d8cd98f00b204e9800998ecf8427e sda1/Boot/mmx64.efi
74b644f41f5920d0ebfbe3b6d7841f69 sda1/ubuntu/grubx64.efi
e289bd85bf93c33b514d01d7870adb97 sda1/ubuntu/mmx64.efi
883dbb8122a0dcbf624c3dde1d658a1e sda1/ubuntu/shimx64.efi
5260071ec03f7afc96a180c5442d4477 sda1/Microsoft/Boot/bootmgfw.efi
6f2ef9daa28804a29400d01627aa063c sda1/Microsoft/Boot/bootmgr.efi
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
sda : is-GPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sdb : is-GPT, no-BIOSboot, has-noESP, not-usb, not-mmc, no-os, 2048 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
sda1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sda2 : is-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sda3 : is-os, 64, apt-get, signed grub-pc grub-efi , grub2, grub-install, grubenv-ok, update-grub, farbios
sdb1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
Partitions info (2/3): _________________________________________________________
sda1 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda2 : isnotESP, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, notwinboot
sda3 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb1 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
sda1 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda2 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda3 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sda
sdb1 : maybesepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdb
fdisk -l (filtered): ___________________________________________________________
Disk sda: 931.53 GiB, 1000204886016 bytes, 1953525168 sectors
Disk identifier: A7A06B7A-3FEE-4D76-94E3-1812DB31101C
Start End Sectors Size Type
sda1 2048 1050623 1048576 512M EFI System
sda2 1050624 507342346 506291723 241.4G Microsoft basic data
sda3 507342348 1953523711 1446181364 689.6G Linux filesystem
Disk sdb: 22.37 GiB, 24015495168 bytes, 46905264 sectors
Disk identifier: 1D6BA7C2-7899-4244-891B-8AC3327A1E8A
Start End Sectors Size Type
sdb1 2048 46903295 46901248 22.4G Linux filesystem
Disk sdc: 28.93 GiB, 31042043904 bytes, 60628992 sectors
Disk identifier: 0x004c61e4
Boot Start End Sectors Size Id Type
sdc1 * 2048 60628991 60626944 28.9G c W95 FAT32 (LBA)
parted -lm (filtered): _________________________________________________________
sda:1000GB:scsi:512:4096:gpt:ATA ST1000LM024 HN-M:;
1:1049kB:538MB:537MB:fat32::boot, esp;
2:538MB:260GB:259GB:ntfs::msftdata;
3:260GB:1000GB:740GB:ext4::;
sdb:24.0GB:scsi:512:512:gpt:ATA SanDisk SSD U100:;
1:1049kB:24.0GB:24.0GB:ext4::;
sdc:31.0GB:scsi:512:512:msdos: USB DISK 2.0:;
1:1049kB:31.0GB:31.0GB:fat32::boot, lba;
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda
├─sda1 vfat DB61-CA78 4583c150-30eb-41f6-8402-78774450c9b4
├─sda2 ntfs 1A505FAF0E3FECC4 c26adaf4-d7ab-48aa-9ac9-93833492ff28
└─sda3 ext4 f9b7b1ea-ba0a-4d46-86e1-a6b1cf84cda3 37069a19-d5a8-4e48-954f-645e9b0c041d
sdb
└─sdb1 ext4 327f1599-951f-4da3-8723-c1833e7e3873 f166d996-eff2-4b3c-b9a7-986e1f6d14a7
sdc
└─sdc1 vfat 9C0F-523D 004c61e4-01 UBUNTU 20_0
df (filtered): _________________________________________________________________
Avail Use% Mounted on
sda1 498.3M 2% /mnt/boot-sav/sda1
sda2 152.5G 37% /mnt/boot-sav/sda2
sda3 618.1G 4% /mnt/boot-sav/sda3
sdb1 20.7G 0% /mnt/boot-sav/sdb1
sdc1 26.3G 9% /cdrom
Mount options: __________________________________________________________________
sda1 rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
sda2 rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda3 rw,relatime
sdb1 rw,relatime
sdc1 ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
====================== sda3/boot/grub/grub.cfg (filtered) ======================
Ubuntu (lowlatency) f9b7b1ea-ba0a-4d46-86e1-a6b1cf84cda3
Ubuntu, with Linux 5.8.0-25-lowlatency f9b7b1ea-ba0a-4d46-86e1-a6b1cf84cda3
Ubuntu, with Linux 5.8.0-23-lowlatency f9b7b1ea-ba0a-4d46-86e1-a6b1cf84cda3
Windows Boot Manager (on sda1) osprober-efi-DB61-CA78
### END /etc/grub.d/30_os-prober ###
UEFI Firmware Settings uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###
========================== sda3/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
UUID=DB61-CA78 /boot/efi vfat umask=0077 0 2
UUID=f9b7b1ea-ba0a-4d46-86e1-a6b1cf84cda3 / ext4 defaults 0 1
======================= sda3/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
==================== sda3: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
790,205530167 = 848,476727296 boot/grub/grub.cfg 2
258,104364395 = 277,137451008 boot/vmlinuz 1
245,526239395 = 263,631792128 boot/vmlinuz-5.8.0-23-lowlatency 1
258,104364395 = 277,137451008 boot/vmlinuz-5.8.0-25-lowlatency 1
245,526239395 = 263,631792128 boot/vmlinuz.old 1
258,043298721 = 277,071882240 boot/initrd.img 2
256,672655106 = 275,600164864 boot/initrd.img-5.8.0-23-lowlatency 3
258,043298721 = 277,071882240 boot/initrd.img-5.8.0-25-lowlatency 2
256,672655106 = 275,600164864 boot/initrd.img.old 3
===================== sda3: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 15845 sept. 2 03:22 09_lowlatency
-rw-r--r-- 1 root root 17622 sept. 14 09:53 10_linux
-rwxr-xr-x 1 root root 42359 sept. 14 09:53 10_linux_zfs
-rwxr-xr-x 1 root root 12894 sept. 14 09:53 20_linux_xen
-rwxr-xr-x 1 root root 12059 sept. 14 09:53 30_os-prober
-rwxr-xr-x 1 root root 1424 sept. 14 09:53 30_uefi-firmware
-rwxr-xr-x 1 root root 214 sept. 14 09:53 40_custom
-rwxr-xr-x 1 root root 216 sept. 14 09:53 41_custom
======================== sda3/etc/grub.d/09_lowlatency =========================
#! /bin/sh
set -e
# grub-mkconfig helper script.
# Copyright (C) 2006,2007,2008,2009,2010 Free Software Foundation, Inc.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB. If not, see <http://www.gnu.org/licenses/>.
#
# Ubuntustudio customization that keeps the latest lowlatency kernel
# as the first menu item and default boot even if there is a newer
# generic or other kernel. Often the updated generic kernel is
# released a few days earlier than the lowlatency kernel
prefix="/usr"
exec_prefix="/usr"
datarootdir="/usr/share"
ubuntu_recovery="1"
quiet_boot="1"
quick_boot="1"
gfxpayload_dynamic="1"
vt_handoff="1"
. "$pkgdatadir/grub-mkconfig_lib"
export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"
# only 09_lowlatency or 10_linux should run, since we got this far
# 10_linux should not run next
if [ -x /etc/grub.d/10_linux ]; then
chmod -x /etc/grub.d/10_linux
fi
CLASS="--class gnu-linux --class gnu --class os"
SUPPORTED_INITS="sysvinit:/lib/sysvinit/init systemd:/lib/systemd/systemd upstart:/sbin/upstart"
if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; then
OS=GNU/Linux
else
case ${GRUB_DISTRIBUTOR} in
Ubuntu|Kubuntu)
OS="${GRUB_DISTRIBUTOR}"
;;
*)
OS="${GRUB_DISTRIBUTOR} GNU/Linux"
;;
esac
CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1|LC_ALL=C sed 's,[^[:alnum:]_],_,g') ${CLASS}"
fi
# loop-AES arranges things so that /dev/loop/X can be our root device, but
# the initrds that Linux uses don't like that.
case ${GRUB_DEVICE} in
/dev/loop/*|/dev/loop[0-9])
GRUB_DEVICE=`losetup ${GRUB_DEVICE} | sed -e "s/^[^(]*(\([^)]\+\)).*/\1/"`
# We can't cope with devices loop-mounted from files here.
case ${GRUB_DEVICE} in
/dev/*) ;;
*) exit 0 ;;
esac
;;
esac
# btrfs may reside on multiple devices. We cannot pass them as value of root= parameter
# and mounting btrfs requires user space scanning, so force UUID in this case.
if [ "x${GRUB_DEVICE_UUID}" = "x" ] || [ "x${GRUB_DISABLE_LINUX_UUID}" = "xtrue" ] \
|| ! test -e "/dev/disk/by-uuid/${GRUB_DEVICE_UUID}" \
|| ( test -e "${GRUB_DEVICE}" && uses_abstraction "${GRUB_DEVICE}" lvm ); then
LINUX_ROOT_DEVICE=${GRUB_DEVICE}
else
LINUX_ROOT_DEVICE=UUID=${GRUB_DEVICE_UUID}
fi
case x"$GRUB_FS" in
xbtrfs)
rootsubvol="`make_system_path_relative_to_its_root /`"
rootsubvol="${rootsubvol#/}"
if [ "x${rootsubvol}" != x ]; then
GRUB_CMDLINE_LINUX="rootflags=subvol=${rootsubvol} threadirqs ${GRUB_CMDLINE_LINUX}"
fi;;
xzfs)
rpool=`${grub_probe} --device ${GRUB_DEVICE} --target=fs_label 2>/dev/null || true`
bootfs="`make_system_path_relative_to_its_root / | sed -e "s,@$,,"`"
LINUX_ROOT_DEVICE="ZFS=${rpool}${bootfs%/}"
;;
esac
title_correction_code=
if [ -x /lib/recovery-mode/recovery-menu ]; then
GRUB_CMDLINE_LINUX_RECOVERY=recovery
else
GRUB_CMDLINE_LINUX_RECOVERY=single
fi
if [ "$ubuntu_recovery" = 1 ]; then
GRUB_CMDLINE_LINUX_RECOVERY="$GRUB_CMDLINE_LINUX_RECOVERY nomodeset"
fi
if [ "$vt_handoff" = 1 ]; then
for word in $GRUB_CMDLINE_LINUX_DEFAULT; do
if [ "$word" = splash ]; then
GRUB_CMDLINE_LINUX_DEFAULT="$GRUB_CMDLINE_LINUX_DEFAULT \$vt_handoff"
fi
done
fi
if [ x"$GRUB_FORCE_PARTUUID" != x ]; then
echo "set partuuid=${GRUB_FORCE_PARTUUID}"
fi
linux_entry ()
{
os="$1"
version="$2"
type="$3"
args="$4"
if [ -z "$boot_device_id" ]; then
boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
fi
if [ x$type != xsimple ] ; then
case $type in
recovery)
title="$(gettext_printf "%s, with Linux %s (%s)" "${os}" "${version}" "$(gettext "${GRUB_RECOVERY_TITLE}")")" ;;
init-*)
title="$(gettext_printf "%s, with Linux %s (%s)" "${os}" "${version}" "${type#init-}")" ;;
*)
title="$(gettext_printf "%s, with Linux %s" "${os}" "${version}")" ;;
esac
if [ x"$title" = x"$GRUB_ACTUAL_DEFAULT" ] || [ x"Previous Linux versions>$title" = x"$GRUB_ACTUAL_DEFAULT" ]; then
replacement_title="$(echo "Advanced options for ${OS}" | sed 's,>,>>,g')>$(echo "$title" | sed 's,>,>>,g')"
quoted="$(echo "$GRUB_ACTUAL_DEFAULT" | grub_quote)"
title_correction_code="${title_correction_code}if [ \"x\$default\" = '$quoted' ]; then default='$(echo "$replacement_title" | grub_quote)'; fi;"
grub_warn "$(gettext_printf "Please don't use old title \`%s' for GRUB_DEFAULT, use \`%s' (for versions before 2.00) or \`%s' (for 2.00 or later)" "$GRUB_ACTUAL_DEFAULT" "$replacement_title" "gnulinux-advanced-$boot_device_id>gnulinux-$version-$type-$boot_device_id")"
fi
echo "menuentry '$(echo "$title" | grub_quote)' ${CLASS} \$menuentry_id_option 'gnulinux-$version-$type-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
else
echo "menuentry '$(echo "$os" | grub_quote)' ${CLASS} \$menuentry_id_option 'gnulinux-simple-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
fi
if [ "$quick_boot" = 1 ]; then
echo " recordfail" | sed "s/^/$submenu_indentation/"
fi
if [ x$type != xrecovery ] ; then
save_default_entry | grub_add_tab
fi
# Use ELILO's generic "efifb" when it's known to be available.
# FIXME: We need an interface to select vesafb in case efifb can't be used.
if [ "x$GRUB_GFXPAYLOAD_LINUX" = x ]; then
echo " load_video" | sed "s/^/$submenu_indentation/"
else
if [ "x$GRUB_GFXPAYLOAD_LINUX" != xtext ]; then
echo " load_video" | sed "s/^/$submenu_indentation/"
fi
fi
if ([ "$ubuntu_recovery" = 0 ] || [ x$type != xrecovery ]) && \
([ "x$GRUB_GFXPAYLOAD_LINUX" != x ] || [ "$gfxpayload_dynamic" = 1 ]); then
echo " gfxmode \$linux_gfx_mode" | sed "s/^/$submenu_indentation/"
fi
echo " insmod gzio" | sed "s/^/$submenu_indentation/"
echo " if [ x\$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi" | sed "s/^/$submenu_indentation/"
if [ x$dirname = x/ ]; then
if [ -z "${prepare_root_cache}" ]; then
prepare_root_cache="$(prepare_grub_to_access_device ${GRUB_DEVICE} | grub_add_tab)"
fi
printf '%s\n' "${prepare_root_cache}" | sed "s/^/$submenu_indentation/"
else
if [ -z "${prepare_boot_cache}" ]; then
prepare_boot_cache="$(prepare_grub_to_access_device ${GRUB_DEVICE_BOOT} | grub_add_tab)"
fi
printf '%s\n' "${prepare_boot_cache}" | sed "s/^/$submenu_indentation/"
fi
if [ x"$quiet_boot" = x0 ] || [ x"$type" != xsimple ]; then
message="$(gettext_printf "Loading Linux %s ..." ${version})"
sed "s/^/$submenu_indentation/" << EOF
echo '$(echo "$message" | grub_quote)'
EOF
fi
if test -d /sys/firmware/efi && test -e "${linux}.efi.signed"; then
sed "s/^/$submenu_indentation/" << EOF
linux ${rel_dirname}/${basename}.efi.signed root=${linux_root_device_thisversion} ro ${args}
EOF
else
# We have initrd and PARTUUID is set - we try to boot without initrd, and fallback to using it
# if it fails.
# "panic=-1" means "on panic reboot immediately". "panic=0" disables the reboot behavior.
if [ x"$GRUB_FORCE_PARTUUID" != x ]; then
linux_root_device_thisversion="PARTUUID=${GRUB_FORCE_PARTUUID}"
fi
message="$(gettext_printf "Loading initial ramdisk ...")"
if test -n "${initrd}" && [ x"$GRUB_FORCE_PARTUUID" != x ]; then
sed "s/^/$submenu_indentation/" << EOF
if [ "\${initrdfail}" = 1 ]; then
linux ${rel_dirname}/${basename} root=${linux_root_device_thisversion} ro ${args}
EOF
if [ x"$quiet_boot" = x0 ] || [ x"$type" != xsimple ]; then
sed "s/^/$submenu_indentation/" << EOF
echo '$(echo "$message" | grub_quote)'
EOF
fi
sed "s/^/$submenu_indentation/" << EOF
initrd ${rel_dirname}/${initrd}
else
linux ${rel_dirname}/${basename} root=${linux_root_device_thisversion} ro ${args} panic=-1
fi
initrdfail
EOF
else
# We don't have initrd or we don't want to set PARTUUID. Don't try initrd-less boot with fallback.
sed "s/^/$submenu_indentation/" << EOF
linux ${rel_dirname}/${basename} root=${linux_root_device_thisversion} ro ${args}
EOF
if test -n "${initrd}"; then
# We do have initrd - let's use it at boot.
# TRANSLATORS: ramdisk isn't identifier. Should be translated.
if [ x"$quiet_boot" = x0 ] || [ x"$type" != xsimple ]; then
sed "s/^/$submenu_indentation/" << EOF
echo '$(echo "$message" | grub_quote)'
EOF
fi
sed "s/^/$submenu_indentation/" << EOF
initrd ${rel_dirname}/${initrd}
EOF
fi
fi
fi
sed "s/^/$submenu_indentation/" << EOF
}
EOF
}
machine=`uname -m`
case "x$machine" in
xi?86 | xx86_64)
list=
for i in /boot/vmlinuz-*lowlatency /vmlinuz-*lowlatency /boot/kernel-*lowlatency ; do
if grub_file_is_not_garbage "$i" ; then list="$list $i" ; fi
done
list2=
for i in /boot/vmlinuz-*generic /vmlinuz-*generic /boot/kernel-*generic ; do
if grub_file_is_not_garbage "$i" ; then list2="$list2 $i" ; fi
done ;;
*)
list=
for i in /boot/vmlinuz-*lowlatency /boot/vmlinux-*lowlatency /vmlinuz-*lowlatency /vmlinux-*lowlatency /boot/kernel-*lowlatency ; do
if grub_file_is_not_garbage "$i" ; then list="$list $i" ; fi
done
list2=
for i in /boot/vmlinuz-*generic /boot/vmlinux-*generic /vmlinuz-*generic /vmlinux-*generic /boot/kernel-*generic ; do
if grub_file_is_not_garbage "$i" ; then list2="$list2 $i" ; fi
done ;;
esac
case "$machine" in
i?86) GENKERNEL_ARCH="x86" ;;
mips|mips64) GENKERNEL_ARCH="mips" ;;
mipsel|mips64el) GENKERNEL_ARCH="mipsel" ;;
arm*) GENKERNEL_ARCH="arm" ;;
*) GENKERNEL_ARCH="$machine" ;;
esac
prepare_boot_cache=
prepare_root_cache=
boot_device_id=
title_correction_code=
cat << 'EOF'
function gfxmode {
set gfxpayload="${1}"
EOF
if [ "$vt_handoff" = 1 ]; then
cat << 'EOF'
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
EOF
fi
cat << EOF
}
EOF
# Use ELILO's generic "efifb" when it's known to be available.
# FIXME: We need an interface to select vesafb in case efifb can't be used.
if [ "x$GRUB_GFXPAYLOAD_LINUX" != x ] || [ "$gfxpayload_dynamic" = 0 ]; then
echo "set linux_gfx_mode=$GRUB_GFXPAYLOAD_LINUX"
else
cat << EOF
if [ "\${recordfail}" != 1 ]; then
if [ -e \${prefix}/gfxblacklist.txt ]; then
if hwmatch \${prefix}/gfxblacklist.txt 3; then
if [ \${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
EOF
fi
cat << EOF
export linux_gfx_mode
EOF
# Extra indentation to add to menu entries in a submenu. We're not in a submenu
# yet, so it's empty. In a submenu it will be equal to '\t' (one tab).
submenu_indentation=""
is_top_level=true
is_generic_top=true
if [ "x$list" = "x" ]; then
is_top_level=false
generic_is_default=true
fi
if [ "x$list2" = "x" ]; then
is_generic_top=false
fi
while [ "x$list $list2" != "x" ] ; do
if [ "x$is_generic_top" = xtrue ] && [ "x$is_top_level" != xtrue ]; then
linux=`version_find_latest $list2`
case $linux in
*.efi.signed)
# We handle these in linux_entry.
list2=`echo $list2 | tr ' ' '\n' | grep -vx $linux | tr '\n' ' '`
continue
;;
esac
else
linux=`version_find_latest $list`
if [ "x$linux" = "x" ]; then
break
fi
case $linux in
*.efi.signed)
# We handle these in linux_entry.
list=`echo $list | tr ' ' '\n' | grep -vx $linux | tr '\n' ' '`
continue
;;
esac
fi
gettext_printf "Found linux image: %s\n" "$linux" >&2
basename=`basename $linux`
dirname=`dirname $linux`
rel_dirname=`make_system_path_relative_to_its_root $dirname`
version=`echo $basename | sed -e "s,^[^0-9]*-,,g"`
alt_version=`echo $version | sed -e "s,\.old$,,g"`
linux_root_device_thisversion="${LINUX_ROOT_DEVICE}"
initrd=
for i in "initrd.img-${version}" "initrd-${version}.img" "initrd-${version}.gz" \
"initrd-${version}" "initramfs-${version}.img" \
"initrd.img-${alt_version}" "initrd-${alt_version}.img" \
"initrd-${alt_version}" "initramfs-${alt_version}.img" \
"initramfs-genkernel-${version}" \
"initramfs-genkernel-${alt_version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${alt_version}"; do
if test -e "${dirname}/${i}" ; then
initrd="$i"
break
fi
done
config=
for i in "${dirname}/config-${version}" "${dirname}/config-${alt_version}" "/etc/kernels/kernel-config-${version}" ; do
if test -e "${i}" ; then
config="${i}"
break
fi
done
initramfs=
if test -n "${config}" ; then
initramfs=`grep CONFIG_INITRAMFS_SOURCE= "${config}" | cut -f2 -d= | tr -d \"`
fi
if test -n "${initrd}" ; then
gettext_printf "Found initrd image: %s\n" "${dirname}/${initrd}" >&2
elif test -z "${initramfs}" ; then
# "UUID=" and "ZFS=" magic is parsed by initrd or initramfs. Since there's
# no initrd or builtin initramfs, it can't work here.
linux_root_device_thisversion=${GRUB_DEVICE}
fi
if [ "x$is_top_level" = xtrue ] && [ "x${GRUB_DISABLE_SUBMENU}" != xy ]; then
linux_entry "${OS} (lowlatency)" "${version}" simple \
"${GRUB_CMDLINE_LINUX} threadirqs ${GRUB_CMDLINE_LINUX_DEFAULT}"
if [ -z "$boot_device_id" ]; then
boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
fi
if [ "x$is_generic_top" != xtrue ]; then
submenu_indentation="$grub_tab"
# TRANSLATORS: %s is replaced with an OS name
echo "submenu '$(gettext_printf "Advanced options for %s" "${OS}" | grub_quote)' \$menuentry_id_option 'gnulinux-advanced-$boot_device_id' {"
fi
is_top_level=false
continue
fi
if [ "x$is_generic_top" = xtrue ] && [ "x${GRUB_DISABLE_SUBMENU}" != xy ]; then
linux_entry "${OS} (generic)" "${version}" simple \
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"
submenu_indentation="$grub_tab"
list="$list $list2"
if [ -z "$boot_device_id" ]; then
boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
fi
# TRANSLATORS: %s is replaced with an OS name
echo "submenu '$(gettext_printf "Advanced options for %s" "${OS}" | grub_quote)' \$menuentry_id_option 'gnulinux-advanced-$boot_device_id' {"
is_generic_top=false
continue
fi
linux_entry "${OS}" "${version}" advanced \
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"
for supported_init in ${SUPPORTED_INITS}; do
init_path="${supported_init#*:}"
if [ -x "${init_path}" ] && [ "$(readlink -f /sbin/init)" != "$(readlink -f "${init_path}")" ]; then
linux_entry "${OS}" "${version}" "init-${supported_init%%:*}" \
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT} init=${init_path}"
fi
done
if [ "x${GRUB_DISABLE_RECOVERY}" != "xtrue" ]; then
linux_entry "${OS}" "${version}" recovery \
"${GRUB_CMDLINE_LINUX_RECOVERY} ${GRUB_CMDLINE_LINUX}"
fi
list=`echo $list | tr ' ' '\n' | fgrep -vx "$linux" | tr '\n' ' '`
done
# If at least one kernel was found, then we need to
# add a closing '}' for the submenu command.
if [ x"$is_top_level" != xtrue ]; then
echo '}'
fi
echo "$title_correction_code"
====================== sdc1/boot/grub/grub.cfg (filtered) ======================
Ubuntu
Ubuntu (safe graphics)
OEM install (for manufacturers)
Boot from next volume
UEFI Firmware Settings
========================= sdc1/syslinux.cfg (filtered) =========================
DEFAULT loadconfig
LABEL loadconfig
CONFIG /isolinux/isolinux.cfg
APPEND /isolinux/
==================== sdc1: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================== sdc1: Location of files loaded by Syslinux ==================
GiB - GB File Fragment(s)
?? = ?? syslinux.cfg 1
?? = ?? ldlinux.sys 1
======================== Unknown MBRs/Boot Sectors/etc =========================
Unknown BootLoader on sda2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 10 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 08 66 2d 1e 00 00 00 00 |.........f-.....|
00000030 04 00 00 00 00 00 00 00 60 d6 e2 01 00 00 00 00 |........`.......|
00000040 f6 00 00 00 01 00 00 00 c4 ec 3f 0e af 5f 50 1a |..........?.._P.|
00000050 00 00 00 00 0e 1f be 71 7c ac 22 c0 74 0b 56 b4 |.......q|.".t.V.|
00000060 0e bb 07 00 cd 10 5e eb f0 32 e4 cd 16 cd 19 eb |......^..2......|
00000070 fe 54 68 69 73 20 69 73 20 6e 6f 74 20 61 20 62 |.This is not a b|
00000080 6f 6f 74 61 62 6c 65 20 64 69 73 6b 2e 20 50 6c |ootable disk. Pl|
00000090 65 61 73 65 20 69 6e 73 65 72 74 20 61 20 62 6f |ease insert a bo|
000000a0 6f 74 61 62 6c 65 20 66 6c 6f 70 70 79 20 61 6e |otable floppy an|
000000b0 64 0d 0a 70 72 65 73 73 20 61 6e 79 20 6b 65 79 |d..press any key|
000000c0 20 74 6f 20 74 72 79 20 61 67 61 69 6e 20 2e 2e | to try again ..|
000000d0 2e 20 0d 0a 00 00 00 00 00 00 00 00 00 00 00 00 |. ..............|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages ================================
File descriptor 63 (pipe:[106767]) leaked on lvs invocation. Parent PID 9080: /bin/bash
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of
sda3,
using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s win-legacy-basic-fix use-standard-efi-file
Final advice in case of suggested repair: ______________________________________
Please do not forget to make your UEFI firmware boot on the Ubuntu 20.10 entry (sda1/efi/****/shim****.efi (**** will be updated in the final message) file) !
If your computer reboots directly into Windows, try to change the boot order in your UEFI firmware.
If your UEFI firmware does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\****\shim****.efi (**** will be updated in the final message)
