1) Pour information le HDD de ce PC date de 2010:
--------------------------------------------------------------------
* j'ai installé la partition "/" au début pour une question de rapidité
* et ai installé Windows 7 (qui ne plante pas au boot) à la fin du HDD
2) Réponse dans le terminal en Live CD:
------------------------------------------------------
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-26-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke,
www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..56GSY
Device Model: TOSHIBA MK5056GSY
Serial Number: 70OITANOT
LU WWN Device Id: 5 000039 2a188833a
Firmware Version: LH003C
User Capacity: 500107862016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Nov 2 14:19:41 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 110) minutes.
SCT capabilities: (0x0033) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0007 100 100 050 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 100 100 002 Pre-fail Always - 2154
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 6845
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Minutes 0x0032 075 075 000 Old_age Always - 173h+04m
10 Spin_Retry_Count 0x0013 236 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 6377
183 Runtime_Bad_Block 0x0022 100 100 001 Old_age Always - 2
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
185 Unknown_Attribute 0x0032 100 100 001 Old_age Always - 65535
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1204
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 001 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 069 053 045 Old_age Always - 31 (Min/Max 22/31)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 331
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 5308497
193 Load_Cycle_Count 0x0032 091 091 000 Old_age Always - 96346
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 3
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 1988 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1988 occurred at disk power-on lifetime: 10384 hours (432 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 7a 00 01 fb 40 Error: WP at LBA = 0x00fb0100 = 16449792
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 48 a0 c0 30 44 40 00 00:00:58.785 WRITE FPDMA QUEUED
60 08 90 80 08 80 40 00 00:00:57.698 READ FPDMA QUEUED
60 40 88 00 01 fb 40 00 00:00:56.972 READ FPDMA QUEUED
60 08 80 00 01 3b 40 00 00:00:56.972 READ FPDMA QUEUED
60 40 78 00 01 fb 40 00 00:00:56.972 READ FPDMA QUEUED
Error 1987 occurred at disk power-on lifetime: 10384 hours (432 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 42 00 01 fb 40 Error: WP at LBA = 0x00fb0100 = 16449792
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 18 f8 28 29 44 40 00 00:19:25.270 WRITE FPDMA QUEUED
60 08 60 80 08 80 40 00 00:19:22.698 READ FPDMA QUEUED
60 08 58 60 01 7c 40 00 00:19:22.360 READ FPDMA QUEUED
60 40 50 00 01 fb 40 00 00:19:22.352 READ FPDMA QUEUED
60 08 48 00 01 3b 40 00 00:19:22.352 READ FPDMA QUEUED
Error 1986 occurred at disk power-on lifetime: 10384 hours (432 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 00 01 fb 40 Error: UNC at LBA = 0x00fb0100 = 16449792
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 60 80 08 80 40 00 00:17:49.748 READ FPDMA QUEUED
60 08 18 60 01 7c 40 00 00:17:48.773 READ FPDMA QUEUED
60 40 10 00 01 fb 40 00 00:17:48.765 READ FPDMA QUEUED
60 08 08 00 01 3b 40 00 00:17:48.764 READ FPDMA QUEUED
60 40 00 00 01 fb 40 00 00:17:48.764 READ FPDMA QUEUED
Error 1985 occurred at disk power-on lifetime: 10384 hours (432 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 ba 00 01 fb 40 Error: UNC at LBA = 0x00fb0100 = 16449792
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 a8 80 08 80 40 00 00:16:41.924 READ FPDMA QUEUED
60 40 00 00 01 fb 40 00 00:16:41.219 READ FPDMA QUEUED
60 08 f8 00 01 3b 40 00 00:16:41.219 READ FPDMA QUEUED
60 40 b8 00 01 fb 40 00 00:16:41.219 READ FPDMA QUEUED
60 40 b0 00 01 bb 40 00 00:16:41.219 READ FPDMA QUEUED
Error 1984 occurred at disk power-on lifetime: 10384 hours (432 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 2a 00 01 fb 40 Error: WP at LBA = 0x00fb0100 = 16449792
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 18 f8 18 29 44 40 00 00:15:45.894 WRITE FPDMA QUEUED
60 40 38 00 01 fb 40 00 00:15:43.717 READ FPDMA QUEUED
60 08 30 00 01 3b 40 00 00:15:43.717 READ FPDMA QUEUED
60 40 28 00 01 fb 40 00 00:15:43.716 READ FPDMA QUEUED
60 40 20 00 01 bb 40 00 00:15:43.716 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 10083 30108564
# 2 Short offline Completed without error 00% 8782 -
# 3 Short offline Completed without error 00% 7542 -
# 4 Short offline Aborted by host 90% 4411 -
# 5 Short offline Completed without error 00% 801 -
# 6 Short offline Completed without error 00% 204 -
# 7 Short offline Completed without error 00% 204 -
# 8 Short offline Completed without error 00% 191 -
# 9 Short offline Completed without error 00% 135 -
#10 Short offline Completed without error 00% 3 -
#11 Short offline Completed without error 00% 3 -
#12 Short offline Completed without error 00% 2 -
#13 Short offline Completed without error 00% 2 -
#14 Short offline Completed without error 00% 2 -
#15 Short offline Completed without error 00% 2 -
#16 Short offline Completed without error 00% 1 -
#17 Short offline Completed without error 00% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
