Bonsoir ylag et grigouille
J'ai réussi à faire fonctionner le scan en installant le plugin 3.20.5 et en refaisant une install custom avec hplip-3.20.5.
J'ai fait une copie écran si ça peut aider (les points d'interrogation indique un choix par défaut)
Je n'ai pas compris la diff entre les class et les discretes drivers, j'ai pris le choix par défaut (d)
le p/n pil est introuvable
Concernant l'install du hplip-3.20.5-plugin, je l'avais déjà installé avant hplip en suivant les préco de ylag, je suppose
que c'est pour cela qu'il est en "failed"
Merci pour vos conseils
jl
jl@PC01:~/Downloads/02drivers$ sh hplip-*.run
Creating directory hplip-3.20.5
Verifying archive integrity... All good.
Uncompressing HPLIP 3.20.5 Self Extracting Archive.................................................................................................
........................................................................................................
.........................................................................................................
.........................................................................................................
.........................................................................................................
....
HP Linux Imaging and Printing System (ver. 3.20.5)
HPLIP Installer ver. 5.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Installer log saved in: hplip-install_Mon-09-Nov-2020_16:11:31.log
\
note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.
INSTALLATION MODE
-----------------
Automatic mode will install the full HPLIP solution with the most common options.
Custom mode allows you to choose installation options to fit specific requirements.
Please choose the installation mode (a=automatic*, c=custom, q=quit) : c
INTRODUCTION
------------
This installer will install HPLIP version 3.20.5 on your computer.
Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).
DISTRO/OS CONFIRMATION
----------------------
Distro appears to be Ubuntu 20.04.
Is "Ubuntu 20.04" your correct distro/OS and version (y=yes*, n=no, q=quit) ?
DRIVER OPTIONS
--------------
Would you like to install Custom Discrete Drivers or Class Drivers ( 'd'= Discrete Drivers*,'c'= Class Drivers,'q'= Quit)? : d
Initializing. Please wait...
SELECT HPLIP OPTIONS
--------------------
You can select which HPLIP options to enable. Some options require extra dependencies.
Do you wish to enable 'Network/JetDirect I/O' (y=yes*, n=no, q=quit) ? n
Do you wish to enable 'Graphical User Interfaces (Qt5)' (y=yes*, n=no, q=quit) ? n
Do you wish to enable 'PC Send Fax support' (y=yes*, n=no, q=quit) ? n
Do you wish to enable 'Scanning support' (y=yes*, n=no, q=quit) ?
Do you wish to enable 'HPLIP documentation (HTML)' (y=yes*, n=no, q=quit) ?
ENTER USER PASSWORD
-------------------
Please enter the sudoer (jl)'s password:
INSTALLATION NOTES
------------------
Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information. Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
Please read the installation notes. Press <enter> to continue or 'q' to quit:
SECURITY PACKAGES
-----------------
AppArmor is installed.
AppArmor protects the application from external intrusion attempts making the application secure
Would you like to have this installer install the hplip specific policy/profile (y=yes*, n=no, q=quit) ?
RUNNING PRE-INSTALL COMMANDS
----------------------------
OK
MISSING DEPENDENCIES
--------------------
Following dependencies are not installed. HPLIP will not work if all REQUIRED dependencies are not installed and some of the HPLIP features will not work if OPTIONAL dependencies are not installed.
Package-Name Component Required/Optional
pil scan OPTIONAL
Do you want to install these missing dependencies (y=yes*, n=no, q=quit) ?
INSTALL MISSING REQUIRED DEPENDENCIES
-------------------------------------
note: Installation of dependencies requires an active internet connection.
INSTALL MISSING OPTIONAL DEPENDENCIES
-------------------------------------
note: Installation of dependencies requires an active internet connection.
warning: Missing OPTIONAL dependency for option 'scan': pil (PIL - Python Imaging Library (required for commandline scanning with hp-scan))
warning: This installer cannot install 'pil' for your distro/OS and/or version.
CHECKING FOR NETWORK CONNECTION
-------------------------------
Network connection present.
RUNNING PRE-PACKAGE COMMANDS
----------------------------
sudo dpkg --configure -a (Pre-depend step 1)
sudo apt-get install --yes --force-yes -f (Pre-depend step 2)
sudo apt-get update (Pre-depend step 3)
OK
DEPENDENCY AND CONFLICT RESOLUTION
----------------------------------
HPLIP-3.20.5 exists, this may conflict with the new one being installed.
Do you want to ('i'= Remove and Install*, 'q'= Quit)? :i
Starting uninstallation...
HPLIP uninstallation is completed
RUNNING POST-PACKAGE COMMANDS
-----------------------------
OK
RE-CHECKING DEPENDENCIES
------------------------
warning: An optional dependency 'pil (PIL - Python Imaging Library (required for commandline scanning with hp-scan))' is still missing.
warning: Some features may not function as expected.
RUNNING SCANJET DEPENDENCY COMMANDS
-----------------------------------
sudo apt-get install --assume-yes python-pip (Scanjet-depend step 1)
warning: Failed to install this Scanjet dependency package. Some Scanjet features will not work.
sudo pip2 install --upgrade pip (Scanjet-depend step 2)
warning: Failed to install this Scanjet dependency package. Some Scanjet features will not work.
sudo apt-get install --assume-yes libleptonica-dev (Scanjet-depend step 3)
sudo apt-get install --assume-yes tesseract-ocr (Scanjet-depend step 4)
sudo apt-get install --assume-yes libtesseract-dev (Scanjet-depend step 5)
sudo -H pip2 install tesserocr (Scanjet-depend step 6)
warning: Failed to install this Scanjet dependency package. Some Scanjet features will not work.
sudo apt-get install --assume-yes tesseract-ocr-all (Scanjet-depend step 7)
sudo apt-get install --assume-yes libzbar-dev (Scanjet-depend step 8)
sudo apt-get install --assume-yes python-zbar (Scanjet-depend step 9)
warning: Failed to install this Scanjet dependency package. Some Scanjet features will not work.
sudo -H pip2 install opencv-python (Scanjet-depend step 10)
warning: Failed to install this Scanjet dependency package. Some Scanjet features will not work.
sudo -H pip2 install PyPDF2 (Scanjet-depend step 11)
warning: Failed to install this Scanjet dependency package. Some Scanjet features will not work.
sudo -H pip2 install imutils (Scanjet-depend step 12)
warning: Failed to install this Scanjet dependency package. Some Scanjet features will not work.
sudo -H pip2 install pypdfocr (Scanjet-depend step 13)
warning: Failed to install this Scanjet dependency package. Some Scanjet features will not work.
sudo -H pip2 install scikit-image (Scanjet-depend step 14)
warning: Failed to install this Scanjet dependency package. Some Scanjet features will not work.
sudo -H pip2 install scipy (Scanjet-depend step 15)
warning: Failed to install this Scanjet dependency package. Some Scanjet features will not work.
OK
READY TO BUILD AND INSTALL
--------------------------
Ready to perform build and install. Press <enter> to continue or 'q' to quit:
PRE-BUILD COMMANDS
------------------
OK
BUILD AND INSTALL
-----------------
Running './configure --with-hpppddir=/usr/share/ppd/HP --libdir=/usr/lib --prefix=/usr --disable-qt4 --disable-qt5 --enable-doc-build --disable-cups-ppd-install --disable-foomatic-drv-install --disable-libusb01_build --disable-foomatic-ppd-install --disable-hpijs-install --disable-class-driver --disable-udev_sysfs_rules --disable-policykit --enable-cups-drv-install --enable-hpcups-install --disable-network-build --enable-dbus-build --enable-scan-build --disable-fax-build --enable-apparmor_build'
Please wait, this may take several minutes...
Command completed successfully.
Running 'make clean'
Please wait, this may take several minutes...
Command completed successfully.
Running 'make'
Please wait, this may take several minutes...
Command completed successfully.
Running 'sudo make install'
Please wait, this may take several minutes...
Command completed successfully.
Build complete.
POST-BUILD COMMANDS
-------------------
CLOSE HP_SYSTRAY
----------------
Sending close message to hp-systray (if it is currently running)...
OK
HPLIP UPDATE NOTIFICATION
-------------------------
Do you want to check for HPLIP updates?. (y=yes*, n=no) :
HPLIP PLUGIN UPDATE NOTIFICATION
--------------------------------
HPLIP Plug-in's needs to be installed/updated. Do you want to update plug-in's?. (y=yes*, n=no) :
Do you want to install plug-in's in GUI mode?. (u=GUI mode*, i=Interactive mode) : i
HP Linux Imaging and Printing System (ver. 3.20.5)
Plugin Download and Install Utility ver. 2.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
HP Linux Imaging and Printing System (ver. 3.20.5)
Plugin Download and Install Utility ver. 2.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
-----------------------------------------
| PLUG-IN INSTALLATION FOR HPLIP 3.20.5 |
-----------------------------------------
Option Description
---------- --------------------------------------------------
d Download plug-in from HP (recommended)
p Specify a path to the plug-in (advanced)
q Quit hp-plugin (skip installation)
Enter option (d=download*, p=specify path, q=quit) ?
-------------------
| DOWNLOAD PLUGIN |
-------------------
Checking for network connection...
Downloading plug-in from:
Downloading plug-in: [\ ] 0% Receiving digital keys: /usr/bin/gpg --homedir /home/jl/.hplip/.gnupg --no-permission-warning --keyserver pgp.mit.edu --recv-keys 0x4ABA2F66DBD5A95894910E0673D770CDA59047B9
()
----------------------
| INSTALLING PLUG-IN |
----------------------
Creating directory plugin_tmp
Verifying archive integrity... All good.
Uncompressing HPLIP 3.20.5 Plugin Self Extracting Archive..............................................................
HP Linux Imaging and Printing System (ver. 3.20.5)
Plugin Installer ver. 3.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Plug-in version: 3.20.5
Installed HPLIP version: 3.20.5
Number of files to install: 64
You must agree to the license terms before installing the plug-in:
LICENSE TERMS FOR HP Linux Imaging and Printing (HPLIP) Driver Plug-in
These License Terms govern your Use of the HPLIP Driver Plug-in Software (the
"Software"). USE OF THE SOFTWARE INCLUDING, WITHOUT LIMITATION, ANY
DOCUMENTATION, IS SUBJECT TO THESE LICENSE TERMS AND THE APPLICABLE AS-IS
WARRANTY STATEMENT. BY DOWNLOADING AND INSTALLING THE SOFTWARE, YOU ARE AGREEING
TO BE BOUND BY THESE TERMS. IF YOU DO NOT AGREE TO ALL OF THESE TERMS, DO NOT
DOWNLOAD AND INSTALL THE SOFTWARE ON YOUR SYSTEM.
1. License Grant. HP grants you a license to Use one copy of the Software with
HP printing products only. "Use" includes using, storing, loading, installing,
executing, and displaying the Software. You may not modify the Software or
disable any licensing or control features of the Software.
2. Ownership. The Software is owned and copyrighted by HP or its third party
suppliers. Your license confers no title to, or ownership in, the Software and
is not a sale of any rights in the Software. HP's third party suppliers may
protect their rights in the Software in the event of any violation of these
license terms.
9. DISCLAIMER OF WARRANTIES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
HP AND ITS SUPPLIERS PROVIDE THE SOFTWARE "AS IS" AND WITH ALL FAULTS, AND
HEREBY DISCLAIM ALL OTHER WARRANTIES AND CONDITIONS, EITHER EXPRESS, IMPLIED, OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF TITLE AND
NON-INFRINGEMENT, ANY IMPLIED WARRANTIES, DUTIES OR CONDITIONS OF
MERCHANTABILITY, OF FITNESS FOR A PARTICULAR PURPOSE, AND OF LACK OF VIRUSES ALL
WITH REGARD TO THE SOFTWARE. Some states/jurisdictions do not allow exclusion of
implied warranties or limitations on the duration of implied warranties, so the
above disclaimer may not apply to you in its entirety.
10. LIMITATION OF LIABILITY. Notwithstanding any damages that you might incur,
the entire liability of HP and any of its suppliers under any provision of this
agreement and your exclusive remedy for all of the foregoing shall be limited to
the greater of the amount actually paid by you separately for the Software or
U.S. $5.00. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL
HP OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO,
DAMAGES FOR LOSS OF PROFITS OR CONFIDENTIAL OR OTHER INFORMATION, FOR BUSINESS
INTERRUPTION, FOR PERSONAL INJURY, FOR LOSS OF PRIVACY ARISING OUT OF OR IN ANY
WAY RELATED TO THE USE OF OR INABILITY TO USE THE SOFTWARE, OR OTHERWISE IN
CONNECTION WITH ANY PROVISION OF THIS AGREEMENT, EVEN IF HP OR ANY SUPPLIER HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND EVEN IF THE REMEDY FAILS OF
ITS ESSENTIAL PURPOSE. Some states/jurisdictions do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
Do you accept the license terms for the plug-in (y=yes*, n=no, q=quit) ?
Please enter the sudoer (jl)'s password:
Plugin installation failed
error: Plugin installation failed
Done.
Done.
RESTART OR RE-PLUG IS REQUIRED
------------------------------
If you are installing a USB connected printer, and the printer was plugged in
when you started this installer, you will need to either restart your PC or
unplug and re-plug in your printer (USB cable only). If you choose to restart,
run this command after restarting: hp-setup (Note: If you are using a parallel
connection, you will have to restart your PC. If you are using network/wireless,
you can ignore and continue).
Restart or re-plug in your printer (r=restart, p=re-plug in*, i=ignore/continue, q=quit) : p
Please unplug and re-plugin your printer now. Press <enter> to continue or 'q' to quit:
PRINTER SETUP
-------------
Would you like to setup a printer now (y=yes*, n=no, q=quit) ?
Please make sure your printer is connected and powered on at this time.
Do you want to setup printer in GUI mode? (u=GUI mode*, i=Interactive mode) : i
Running 'hp-setup -i' command....
HP Linux Imaging and Printing System (ver. 3.20.5)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
Using connection type: usb
Setting up device: hp:/usb/DeskJet_Plus_4100_series?serial=CN0V41
---------------------
| PRINT QUEUE SETUP |
---------------------
warning: One or more print queues already exist for this device: DeskJet_Plus_4100.
Would you like to install another print queue for this device (y=yes, n=no*, q=quit) ?
Done.
RE-STARTING HP_SYSTRAY
----------------------
HP Linux Imaging and Printing System (ver. 3.20.5)
System Tray Status Service ver. 2.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
warning: GUI Modules PyQt4 and PyQt5 are not installed
error: hp-systray requires Qt4 GUI and DBus support. Exiting.
jl@PC01:~/Downloads/02drivers$
