Ce site est optimisé pour être consulté depuis un navigateur moderne dans lequel JavaScript est activé.

DeskJet 2710 (Installation imprimante/scanner)

ceric

Bonjour,
Je me suis commandé la DeskJet 2710 sans avoir consulté le forum et puis je me suis dit au moment de l'achat : si c'est une HP c'est forcément reconnu.
J'avais une envy 5546 qui fonctionnait avec le driver 3.20.9 mais qui m'a lâché (écran de fonction tout noir).
Je ne l'ai pas encore reçu mais j'aurai quelques questions :
- Dois-je l'installer directement en suivant la procédure suivante avant de la laisser s'installer avec la version 3.20.3?
- Prendriez-vous l'installation avec interface graphique ou custom?
edit : j'ai migré vers la 20.10; bilan elle a de suite été reconnue y compris le scanner.

ceric

cedric@cedric-System-Product-Name:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=20.04
DISTRIB_CODENAME=focal
DISTRIB_DESCRIPTION="Ubuntu 20.04.1 LTS"

cedric@cedric-System-Product-Name:~$ uname -i
x86_64

cedric@cedric-System-Product-Name:~$ groups
cedric adm cdrom sudo dip plugdev lpadmin lxd sambashare

cedric@cedric-System-Product-Name:~$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 046d:082d Logitech, Inc. HD Pro Webcam C920
Bus 001 Device 004: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 001 Device 006: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 001 Device 005: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

grigouille

C'est une imprimante récente. Il te faut [doc]hplip[/doc] >= 3.20.5

ceric

Bonjour grigouille, je me suis téléchargé la 3.20.5.
Puis-je l'installer suivant la procédure sans avoir reçu l'imprimante?

grigouille

Tu peux le faire mais j'attendrai d'avoir l'imprimante. Elle sera alors installée pendant la procédure.

ceric

Argh, je l'ai installé.

grigouille

Ce n'est pas grave.

ceric

Je viens à l'instant de faire une clean/fresh install de la distribution.
Donc je repars à zéro.
Je viendrai poster lorsque je serai en carafe ou que j'aurai réussi à installer cette 2710. 🙂
edit : je vais suivre ce tuto dès que je la reçois.

ceric

@grigouille, pencherais-tu plus vers une installation automatique ou custom?
Sachant que je ne souhaiterais pas non plus avoir toute cette usine à gaz HP.
edit : En relisant le tuto plus haut, j'avais la réponse.

grigouille

Il semble qu'avec la 20.04, l'installation automatique ne fonctionne pas. Lis la doc [doc]hplip[/doc] pour l'installation custom.

Autre solution : passez à Ubuntu 20.10.

ceric

Je crois que je vais garder ma 20.04.1 et tenter l'installation custom car je ne veux pas me lancer dans les migrations semestrielles.
edit : du coup cela fait quelques années que je ne veux plus tourner sur une non lts car j'achète du matos trop récent et là rebelote. :/

ceric

Merci à grigouille. Sujet résolu.

ceric

Finalement après LE bug de trop de firefox, j'ai reformaté ma bécane et remis la budgie 20.04.1. Et installé en mode custom la DeskJet.
Xsane ne fonctionne pas.

ceric

Bonsoir,
J'ai reformaté mon pc sous la 20.04.1.
J'ai installé le pilote custom

cedric@cedric-System-Product-Name:~$ dpkg -l | grep hplip
rc  hplip                                 3.20.3+dfsg0-2                        amd64        HP Linux Printing and Imaging System (HPLIP)
ii  hplip-data                            3.20.3+dfsg0-2                        all          HP Linux Printing and Imaging - data files

cedric@cedric-System-Product-Name:~$ hp-check
/usr/bin/hp-check:685: SyntaxWarning: "is not" with a literal. Did you mean "!="?
  if 'getfacl' not in g and '' is not g and 'file' not in g:
Saving output in log file: /home/cedric/hp-check.log

HP Linux Imaging and Printing System (ver. 3.20.11)
Dependency/Version Check Utility ver. 15.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                    
2. Run-time check mode (-r or --run): Use this mode to determine if a distro    
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                      
3. Both compile- and run-time check mode (-b or --both) (Default): This mode    
will check both of the above cases (both compile- and run-time dependencies).   

Check types:                                                                    
a. EXTERNALDEP - External Dependencies                                          
b. GENERALDEP - General Dependencies (required both at compile and run time)    
c. COMPILEDEP - Compile time Dependencies                                       
d. [All are run-time checks]                                                    
PYEXT SCANCONF QUEUES PERMISSION                                                

Status Types:
    OK
    MISSING       - Missing Dependency or Permission or Plug-in
    INCOMPAT      - Incompatible dependency-version or Plugin-version

 
---------------
| SYSTEM INFO |
---------------

 Kernel: 5.4.0-56-generic #62-Ubuntu SMP Mon Nov 23 19:20:19 UTC 2020 GNU/Linux
 Host: cedric-System-Product-Name
 Proc: 5.4.0-56-generic #62-Ubuntu SMP Mon Nov 23 19:20:19 UTC 2020 GNU/Linux
 Distribution: 12 20.04
 Bitness: 64 bit


-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.20.11
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for ubuntu distro  20.04 version 

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.20.11

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.20.11
html=/usr/share/doc/hplip-3.20.11
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=no
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.11
restricted-build=no
ui-toolkit=no
qt3=no
qt4=no
qt5=no
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=yes
class-driver=no


Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory

Current contents of '~/.hplip/hplip.conf' file:
[upgrade]
notify_upgrade = true
last_upgraded_time = 1607287092
pending_upgrade_time = 0

[last_used]
device_uri = hp:/usb/DeskJet_2700_series?serial=CN08R4E6RS

[installation]
date_time = 12/06/20 22:53:23
version = 3.20.11


 <Package-name>        <Package-Desc>      <Required/Optional> <Min-Version> <Installed-Version> <Status>   <Comment>

-------------------------
| External Dependencies |
-------------------------

 cups                 CUPS - Common Unix Printing System                           REQUIRED        1.1             2.3.1           OK         'CUPS Scheduler is running'
 gs                   GhostScript - PostScript and PDF language interpreter and previewer REQUIRED        7.05            9.50            OK         -
 xsane                xsane - Graphical scanner frontend for SANE                  OPTIONAL        0.9             0.999           OK         -
 scanimage            scanimage - Shell scanning program                           OPTIONAL        1.0             1.0.29          OK         -
 dbus                 DBus - Message bus system                                    REQUIRED        -               1.12.16         OK         -
 policykit            PolicyKit - Administrative policy framework                  OPTIONAL        -               0.105           OK         -
 network              network -wget                                                OPTIONAL        -               1.20.3          OK         -
 avahi-utils          avahi-utils                                                  OPTIONAL        -               0.7             OK         -

------------------------
| General Dependencies |
------------------------

 libjpeg              libjpeg - JPEG library                                       REQUIRED        -               -               OK         -
 cups-devel           CUPS devel- Common Unix Printing System development files    REQUIRED        -               2.3.1           OK         -
 cups-image           CUPS image - CUPS image development files                    REQUIRED        -               2.3.1           OK         -
 libpthread           libpthread - POSIX threads library                           REQUIRED        -               b'2.31'         OK         -
 libusb               libusb - USB library                                         REQUIRED        -               1.0             OK         -
 sane                 SANE - Scanning library                                      REQUIRED        -               -               OK         -
 sane-devel           SANE - Scanning library development files                    REQUIRED        -               -               OK         -
 libavahi-dev         libavahi-dev                                                 REQUIRED        -               -               OK         -
 libnetsnmp-devel     libnetsnmp-devel - SNMP networking library development files REQUIRED        5.0.9           5.8             OK         -
 libcrypto            libcrypto - OpenSSL cryptographic library                    REQUIRED        -               1.1.1           OK         -
 python3X             Python 2.2 or greater - Python programming language          REQUIRED        2.2             3.8.5           OK         -
 python3-notify2      Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL        -               -               OK         -
 error: python3-pyqt5-dbus PyQt 5 DBus - DBus Support for PyQt5                         OPTIONAL        5.0             -               MISSING    'python3-pyqt5-dbus needs to be installed'
 error: python3-pyqt5 PyQt 5- Qt interface for Python (for Qt version 4.x)         REQUIRED        5.0             -               MISSING    'python3-pyqt5 needs to be installed'
 python3-dbus         Python DBus - Python bindings for DBus                       REQUIRED        0.80.0          1.2.16          OK         -
 python3-xml          Python XML libraries                                         REQUIRED        -               2.2.9           OK         -
 python3-devel        Python devel - Python development files                      REQUIRED        2.2             3.8.5           OK         -
 python3-pil          PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL        -               7.0.0           OK         -
 python3-reportlab    Reportlab - PDF library for Python                           OPTIONAL        2.0             3.5.34          OK         -

--------------
| COMPILEDEP |
--------------

 libtool              libtool - Library building support services                  REQUIRED        -               2.4.6           OK         -
 gcc                  gcc - GNU Project C and C++ Compiler                         REQUIRED        -               9.3.0           OK         -
 make                 make - GNU make utility to maintain groups of programs       REQUIRED        3.0             4.2.1           OK         -

---------------------
| Python Extentions |
---------------------

 cupsext              CUPS-Extension                                               REQUIRED        -               3.20.11         OK         -
 hpmudext             IO-Extension                                                 REQUIRED        -               3.20.11         OK         -

----------------------
| Scan Configuration |
----------------------

 hpaio                HPLIP-SANE-Backend                                           REQUIRED        -               3.20.11         OK         'hpaio found in /etc/sane.d/dll.conf'
 scanext              Scan-SANE-Extension                                          REQUIRED        -               3.20.11         OK         -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

device `hpaio:/usb/DeskJet_2700_series?serial=CN08R4E6RS' is a Hewlett-Packard DeskJet_2700_series all-in-one
device `hpaio:/net/deskjet_2700_series?ip=192.168.1.125&queue=false' is a Hewlett-Packard deskjet_2700_series all-in-one
device `escl:https://192.168.1.125:443' is a ESCL HP DeskJet 2700 series [D6DFFD] SSL flatbed scanner
device `escl:http://192.168.1.125:8080' is a ESCL HP DeskJet 2700 series [D6DFFD] flatbed scanner


--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                        Model                 
  --------------------------------  ----------------------
  hp:/usb/DeskJet_2700_series?seri  HP DeskJet 2700 series
  al=CN08R4E6RS                                           

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 


Type: Unknown
Device URI: implicitclass://HP_DeskJet_2700_series_D6DFFD_/


--------------
| PERMISSION |
--------------

USB             None                           Required        -        -        OK       Node:'/dev/bus/usb/001/008' Perm:'  root  lp rw- rw- rw- rw- r--'
 
-----------
| SUMMARY |
-----------

Missing Required Dependencies
-----------------------------
error: 'python3-pyqt5' package is missing/incompatible 
error: 'gtk2-engines-pixbuf' package is missing/incompatible 

Missing Optional Dependencies
-----------------------------
error: 'python3-dbus.mainloop.pyqt5' package is missing/incompatible 

Total Errors: 2
Total Warnings: 0


Done.

ceric

cedric@cedric-System-Product-Name:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=20.04
DISTRIB_CODENAME=focal
DISTRIB_DESCRIPTION="Ubuntu 20.04.1 LTS"

cedric@cedric-System-Product-Name:~$ uname -i
x86_64

cedric@cedric-System-Product-Name:~$ groups
cedric adm cdrom sudo dip plugdev lpadmin lxd sambashare

cedric@cedric-System-Product-Name:~$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 046d:082d Logitech, Inc. HD Pro Webcam C920
Bus 001 Device 008: ID 03f0:1853 HP, Inc DeskJet 2700 series
Bus 001 Device 005: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 001 Device 007: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 001 Device 006: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

ceric

J'ai comme ces deux messages :
Avec Xsane : le scanner est reconnu, mais message d'erreur : erreur d'ouverture du périphérique hpaio:/usb/Deskjet_2700_series...
Avec Numeriseur de Documents 3.36.33 : échec de la numérisation impossible de se connecter au périphérique
Merci d'avance pour votre aide.

ceric

Autre info:

cedric@cedric-System-Product-Name:~$ hp-scan

HP Linux Imaging and Printing System (ver. 3.20.11)
Scan Utility ver. 2.2

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


-----------------
| SELECT DEVICE |
-----------------

  Num       Scan device URI                                            
  --------  -----------------------------------------------------------
  0         hpaio:/usb/DeskJet_2700_series?serial=CN08R4E6RS           
  1         hpaio:/net/deskjet_2700_series?ip=192.168.1.125&queue=false
  2         escl:https://192.168.1.125:443                             
  3         escl:http://192.168.1.125:8080                             

Enter number 0...3 for device (q=quit) ?0
warning: No destinations specified. Adding 'file' destination by default.
Using device hpaio:/usb/DeskJet_2700_series?serial=CN08R4E6RS
Opening connection to device...
error: SANE: Error during device I/O (code=9)

grigouille

Comme d'habitude :
Supprime l'imprimante :

hp-setup -ir

Installe l'imprimante :

hp-setup -iax

moko138

En #1, hier soir, tu montrais

J'ai reformaté mon pc sous la 20.04.1.
J'ai installé le pilote custom

cedric@cedric-System-Product-Name:~$ dpkg -l | grep hplip
rc  hplip                                 3.20.3+dfsg0-2                        amd64        HP Linux Printing and Imaging System (HPLIP)
ii  hplip-data                            3.20.3+dfsg0-2                        all          HP Linux Printing and Imaging - data files

Ce retour indique que :
hplip-data est bien installé ("ii"), mais que
hplip n'est plus installé ; il n'en reste que des fichiers de configuration ("rc").

ceric

Je ne vais pas insister et vous faire perdre inutilement votre temps; ce soir, je migre à nouveau vers la gorilla.

Page suivante »