J'ai remplacé cdb par cdc (le disque a changé de nom)
sudo smartctl -s on -a /dev/sdc
[sudo] Mot de passe de michelucia :
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-58-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba X300
Device Model: TOSHIBA HDWE140
Serial Number: 205RK3N0FBRG
LU WWN Device Id: 5 000039 9dc4006ee
Firmware Version: FP1R
User Capacity: 4.000.787.030.016 bytes [4,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Dec 19 14:59:02 2020 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 481) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 226
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 551
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 2416
10 Spin_Retry_Count 0x0033 111 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 421
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 6
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 62
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 554
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 35 (Min/Max 19/42)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 3050
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0
222 Loaded_Hours 0x0032 094 094 000 Old_age Always - 2414
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 543
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 3055 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3055 occurred at disk power-on lifetime: 2412 hours (100 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 41 80 ff 6c 39 40 Error: ICRC, ABRT at LBA = 0x00396cff = 3763455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 40 a0 c0 52 39 40 00 01:44:14.815 WRITE FPDMA QUEUED
61 40 98 00 58 39 40 00 01:44:14.815 WRITE FPDMA QUEUED
61 40 90 40 5d 39 40 00 01:44:14.815 WRITE FPDMA QUEUED
61 40 88 80 62 39 40 00 01:44:14.815 WRITE FPDMA QUEUED
61 40 80 c0 67 39 40 00 01:44:14.814 WRITE FPDMA QUEUED
Error 3054 occurred at disk power-on lifetime: 2412 hours (100 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 41 88 77 62 38 40 Error: ICRC, ABRT at LBA = 0x00386277 = 3695223
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 40 98 b8 67 38 40 00 01:19:49.480 WRITE FPDMA QUEUED
61 40 90 78 62 38 40 00 01:19:49.480 WRITE FPDMA QUEUED
61 40 88 38 5d 38 40 00 01:19:49.480 WRITE FPDMA QUEUED
ef 10 02 00 00 00 a0 00 01:19:49.480 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 01:19:49.480 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 3053 occurred at disk power-on lifetime: 2410 hours (100 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 41 58 df ff 00 40 Error: ICRC, ABRT at LBA = 0x0000ffdf = 65503
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 58 e0 fe 00 40 00 00:12:20.573 READ FPDMA QUEUED
60 00 50 e0 fd 00 40 00 00:12:20.572 READ FPDMA QUEUED
60 00 48 e0 fc 00 40 00 00:12:20.572 READ FPDMA QUEUED
60 00 40 e0 fb 00 40 00 00:12:20.571 READ FPDMA QUEUED
60 00 38 e0 fa 00 40 00 00:12:20.571 READ FPDMA QUEUED
Error 3052 occurred at disk power-on lifetime: 2410 hours (100 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 41 30 2f 86 38 40 Error: ICRC, ABRT at LBA = 0x0038862f = 3704367
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 30 28 86 38 40 00 00:06:20.316 READ FPDMA QUEUED
e5 00 00 00 00 00 00 00 00:06:20.316 CHECK POWER MODE
60 01 10 22 86 38 40 00 00:06:20.285 READ FPDMA QUEUED
60 01 08 23 86 38 40 00 00:06:20.285 READ FPDMA QUEUED
60 01 00 24 86 38 40 00 00:06:20.285 READ FPDMA QUEUED
Error 3051 occurred at disk power-on lifetime: 2410 hours (100 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 41 70 22 86 38 40 Error: ICRC, ABRT at LBA = 0x00388622 = 3704354
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 98 27 86 38 40 00 00:06:19.619 READ FPDMA QUEUED
60 01 90 26 86 38 40 00 00:06:19.619 READ FPDMA QUEUED
60 01 88 25 86 38 40 00 00:06:19.619 READ FPDMA QUEUED
60 01 80 24 86 38 40 00 00:06:19.619 READ FPDMA QUEUED
60 01 78 23 86 38 40 00 00:06:19.619 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
journalctl -b -p err | tail -200
-- Logs begin at Sat 2020-12-19 10:53:13 EET, end at Sat 2020-12-19 14:59:02 EET. --
dec 19 11:16:20 michelucia-System-Product-Name kernel: Initramfs unpacking failed: Decoding failed
dec 19 11:16:20 michelucia-System-Product-Name kernel: usbhid 1-3:1.1: couldn't find an input interrupt endpoint
dec 19 11:16:20 michelucia-System-Product-Name kernel: nouveau 0000:01:00.0: DRM: failed to create kernel channel, -22
dec 19 11:16:21 michelucia-System-Product-Name kernel: nvidia-gpu 0000:01:00.3: i2c timeout error e0000000
dec 19 11:16:21 michelucia-System-Product-Name kernel: ucsi_ccg 0-0008: i2c_transfer failed -110
dec 19 11:16:21 michelucia-System-Product-Name kernel: ucsi_ccg 0-0008: ucsi_ccg_init failed - -110
dec 19 11:16:34 michelucia-System-Product-Name gdm-password][1396]: gkr-pam: unable to locate daemon control file
dec 19 11:16:47 michelucia-System-Product-Name pulseaudio[1426]: GetManagedObjects() failed: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms)
dec 19 11:19:47 michelucia-System-Product-Name kernel: ata3.00: exception Emask 0x10 SAct 0x3800000 SErr 0x400100 action 0x6 frozen
dec 19 11:19:47 michelucia-System-Product-Name kernel: ata3.00: irq_stat 0x08000000, interface fatal error
dec 19 11:19:47 michelucia-System-Product-Name kernel: ata3: SError: { UnrecovData Handshk }
dec 19 11:19:47 michelucia-System-Product-Name kernel: ata3.00: failed command: WRITE FPDMA QUEUED
dec 19 11:19:47 michelucia-System-Product-Name kernel: ata3.00: cmd 61/40:b8:c0:28:39/05:00:3a:00:00/40 tag 23 ncq dma 688128 out
res 40/00:c8:40:33:39/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
dec 19 11:19:47 michelucia-System-Product-Name kernel: ata3.00: status: { DRDY }
dec 19 11:19:47 michelucia-System-Product-Name kernel: ata3.00: failed command: WRITE FPDMA QUEUED
dec 19 11:19:47 michelucia-System-Product-Name kernel: ata3.00: cmd 61/40:c0:00:2e:39/05:00:3a:00:00/40 tag 24 ncq dma 688128 out
res 40/00:c8:40:33:39/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
dec 19 11:19:47 michelucia-System-Product-Name kernel: ata3.00: status: { DRDY }
dec 19 11:19:47 michelucia-System-Product-Name kernel: ata3.00: failed command: WRITE FPDMA QUEUED
dec 19 11:19:47 michelucia-System-Product-Name kernel: ata3.00: cmd 61/40:c8:40:33:39/05:00:3a:00:00/40 tag 25 ncq dma 688128 out
res 40/00:c8:40:33:39/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
dec 19 11:19:47 michelucia-System-Product-Name kernel: ata3.00: status: { DRDY }
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: exception Emask 0x10 SAct 0xf8 SErr 0x400100 action 0x6 frozen
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: irq_stat 0x08000000, interface fatal error
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3: SError: { UnrecovData Handshk }
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: failed command: WRITE FPDMA QUEUED
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: cmd 61/40:18:c0:52:39/05:00:3a:00:00/40 tag 3 ncq dma 688128 out
res 40/00:38:c0:67:39/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: status: { DRDY }
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: failed command: WRITE FPDMA QUEUED
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: cmd 61/40:20:00:58:39/05:00:3a:00:00/40 tag 4 ncq dma 688128 out
res 40/00:38:c0:67:39/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: status: { DRDY }
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: failed command: WRITE FPDMA QUEUED
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: cmd 61/40:28:40:5d:39/05:00:3a:00:00/40 tag 5 ncq dma 688128 out
res 40/00:38:c0:67:39/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: status: { DRDY }
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: failed command: WRITE FPDMA QUEUED
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: cmd 61/40:30:80:62:39/05:00:3a:00:00/40 tag 6 ncq dma 688128 out
res 40/00:38:c0:67:39/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: status: { DRDY }
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: failed command: WRITE FPDMA QUEUED
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: cmd 61/40:38:c0:67:39/05:00:3a:00:00/40 tag 7 ncq dma 688128 out
res 40/00:38:c0:67:39/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: status: { DRDY }
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: exception Emask 0x10 SAct 0x1f0000 SErr 0x400100 action 0x6 frozen
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: irq_stat 0x08000000, interface fatal error
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3: SError: { UnrecovData Handshk }
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: failed command: WRITE FPDMA QUEUED
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: cmd 61/40:80:c0:67:39/05:00:3a:00:00/40 tag 16 ncq dma 688128 out
res 40/00:a0:c0:52:39/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: status: { DRDY }
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: failed command: WRITE FPDMA QUEUED
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: cmd 61/40:88:80:62:39/05:00:3a:00:00/40 tag 17 ncq dma 688128 out
res 40/00:a0:c0:52:39/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: status: { DRDY }
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: failed command: WRITE FPDMA QUEUED
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: cmd 61/40:90:40:5d:39/05:00:3a:00:00/40 tag 18 ncq dma 688128 out
res 40/00:a0:c0:52:39/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: status: { DRDY }
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: failed command: WRITE FPDMA QUEUED
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: cmd 61/40:98:00:58:39/05:00:3a:00:00/40 tag 19 ncq dma 688128 out
res 40/00:a0:c0:52:39/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: status: { DRDY }
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: failed command: WRITE FPDMA QUEUED
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: cmd 61/40:a0:c0:52:39/05:00:3a:00:00/40 tag 20 ncq dma 688128 out
res 40/00:a0:c0:52:39/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
dec 19 11:19:48 michelucia-System-Product-Name kernel: ata3.00: status: { DRDY }
dec 19 11:19:49 michelucia-System-Product-Name kernel: ata3.00: exception Emask 0x10 SAct 0xf000 SErr 0x400100 action 0x6 frozen
dec 19 11:19:49 michelucia-System-Product-Name kernel: ata3.00: irq_stat 0x08000000, interface fatal error
dec 19 11:19:49 michelucia-System-Product-Name kernel: ata3: SError: { UnrecovData Handshk }
dec 19 11:19:49 michelucia-System-Product-Name kernel: ata3.00: failed command: WRITE FPDMA QUEUED
dec 19 11:19:49 michelucia-System-Product-Name kernel: ata3.00: cmd 61/40:60:80:f5:39/05:00:3a:00:00/40 tag 12 ncq dma 688128 out
res 40/00:78:40:05:3a/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
dec 19 11:19:49 michelucia-System-Product-Name kernel: ata3.00: status: { DRDY }
dec 19 11:19:49 michelucia-System-Product-Name kernel: ata3.00: failed command: WRITE FPDMA QUEUED
dec 19 11:19:49 michelucia-System-Product-Name kernel: ata3.00: cmd 61/40:68:c0:fa:39/05:00:3a:00:00/40 tag 13 ncq dma 688128 out
res 40/00:78:40:05:3a/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
dec 19 11:19:49 michelucia-System-Product-Name kernel: ata3.00: status: { DRDY }
dec 19 11:19:49 michelucia-System-Product-Name kernel: ata3.00: failed command: WRITE FPDMA QUEUED
dec 19 11:19:49 michelucia-System-Product-Name kernel: ata3.00: cmd 61/40:70:00:00:3a/05:00:3a:00:00/40 tag 14 ncq dma 688128 out
res 40/00:78:40:05:3a/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
dec 19 11:19:49 michelucia-System-Product-Name kernel: ata3.00: status: { DRDY }
dec 19 11:19:49 michelucia-System-Product-Name kernel: ata3.00: failed command: WRITE FPDMA QUEUED
dec 19 11:19:49 michelucia-System-Product-Name kernel: ata3.00: cmd 61/40:78:40:05:3a/05:00:3a:00:00/40 tag 15 ncq dma 688128 out
res 40/00:78:40:05:3a/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
dec 19 11:19:49 michelucia-System-Product-Name kernel: ata3.00: status: { DRDY
~$ journalctl -b | grep error | grep sdc | tail -200
