bonjour !
Pour les log, c'est surtout qu'ils me paraissent la signature d'un processus systemd qui tourne en rond,
J'ai oublié de préciser que ma carte graphique est une intel et qu'aucun pilote nividia n'est présent (il ya eu pas mal de problème avec nvidia et systemd) et enfin que j'ai supprimé les paquets bluez* pour les problèmes avec le bluetooth
voila les sorties des commandes :
lisa@lisaHost:~$ dmesg -lerr | head -25
[ 0.097074] x86/cpu: VMX (outside TXT) disabled by BIOS
[ 2.244129] ima: Error Communicating to TPM chip
[ 2.247284] ima: Error Communicating to TPM chip
[ 2.250296] ima: Error Communicating to TPM chip
[ 2.253631] ima: Error Communicating to TPM chip
[ 2.257799] ima: Error Communicating to TPM chip
[ 2.261155] ima: Error Communicating to TPM chip
[ 2.264573] ima: Error Communicating to TPM chip
[ 2.267948] ima: Error Communicating to TPM chip
[ 4.535709] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[21916.644175] tpm tpm0: tpm_try_transmit: send(): error -5
[21916.801411] Bluetooth: hci0: unexpected event for opcode 0xfc2f
lisa@lisaHost:~$
lisa@lisaHost:~$ sudo /lib/systemd/systemd-udevd -D ; echo; lsusb | sort; echo; lsusb -t
value '[dmi/id]sys_vendor' is 'Hewlett-Packard'
value '[dmi/id]sys_vendor' is 'Hewlett-Packard'
2-3:1.0: /usr/lib/udev/rules.d/50-udev-default.rules:14 Importing properties from results of builtin command 'hwdb --subsystem=usb'
2-3:1.0: /usr/lib/udev/rules.d/60-drm.rules:3 Importing properties from results of builtin command 'path_id'
2-3:1.0: sd-device: Created db file '/run/udev/data/+usb:2-3:1.0' for '/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0'
2-3:1.0: Device (SEQNUM=191646, ACTION=change) processed
2-3:1.0: sd-device-monitor: Passed 654 byte to netlink monitor
2-3:1.0: Device (SEQNUM=191648, ACTION=change) is queued
2-3:1.0: sd-device-monitor: Passed 413 byte to netlink monitor
2-3:1.0: Processing device (SEQNUM=191648, ACTION=change)
value '[dmi/id]sys_vendor' is 'Hewlett-Packard'
value '[dmi/id]sys_vendor' is 'Hewlett-Packard'
2-3:1.0: /usr/lib/udev/rules.d/50-udev-default.rules:14 Importing properties from results of builtin command 'hwdb --subsystem=usb'
2-3:1.0: /usr/lib/udev/rules.d/60-drm.rules:3 Importing properties from results of builtin command 'path_id'
3-3:1.0: Device (SEQNUM=191649, ACTION=change) is queued
2-3:1.0: sd-device: Created db file '/run/udev/data/+usb:2-3:1.0' for '/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0'
2-3:1.0: Device (SEQNUM=191648, ACTION=change) processed
2-3:1.0: sd-device-monitor: Passed 654 byte to netlink monitor
^CUnload module index
Unloaded link configuration context.
Worker [62746] exited
3-3:1.0: sd-device: Created db file '/run/udev/data/+usb:3-3:1.0' for '/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0'
3-3:1.0: Device (SEQNUM=191603, ACTION=change) processed
3-3:1.0: sd-device-monitor: Passed 613 byte to netlink monitor
Unload module index
Unloaded link configuration context.
Worker [62745] exited
Unload module index
Unloaded link configuration context.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 0424:2134 Microchip Technology, Inc. (formerly SMSC) Hub
Bus 002 Device 003: ID 8087:07dc Intel Corp.
Bus 002 Device 004: ID 138a:003f Validity Sensors, Inc. VFS495 Fingerprint Reader
Bus 002 Device 005: ID 05c8:0369 Cheng Uei Precision Industry Co., Ltd (Foxlink) HP HD Webcam
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 0424:5534 Microchip Technology, Inc. (formerly SMSC) Hub
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
|__ Port 3: Dev 2, If 0, Class=Hub, Driver=hub/3p, 5000M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/9p, 480M
|__ Port 3: Dev 2, If 0, Class=Hub, Driver=hub/3p, 480M
|__ Port 4: Dev 3, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 4: Dev 3, If 1, Class=Wireless, Driver=btusb, 12M
|__ Port 5: Dev 4, If 0, Class=Vendor Specific Class, Driver=, 12M
|__ Port 7: Dev 5, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 7: Dev 5, If 0, Class=Video, Driver=uvcvideo, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/3p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
lisa@lisaHost:~$
lisa@lisaHost:~$ sudo lshw | grep -EA12 "\*\-usb|usb@"
*-usb:0
description: USB controller
produit: 8 Series USB xHCI HC
fabricant: Intel Corporation
identifiant matériel: 14
information bus: pci@0000:00:14.0
version: 04
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi xhci bus_master cap_list
configuration : driver=xhci_hcd latency=0
ressources : irq:46 mémoire:d0720000-d072ffff
*-usbhost:0
produit: xHCI Host Controller
fabricant: Linux 5.8.0-36-generic xhci-hcd
identifiant matériel: 0
information bus: usb@2
nom logique: usb2
version: 5.08
fonctionnalités: usb-2.00
configuration : driver=hub slots=9 speed=480Mbit/s
*-usb:0
description: Concentrateur USB
produit: USB2134B
fabricant: SMSC
identifiant matériel: 3
information bus: usb@2:3
version: 50.00
fonctionnalités: usb-2.10
configuration : driver=hub slots=3 speed=480Mbit/s
*-usb:1
description: Interface sans fil Bluetooth
fabricant: Intel Corp.
identifiant matériel: 4
information bus: usb@2:4
version: 0.01
fonctionnalités: bluetooth usb-2.00
configuration : driver=btusb maxpower=100mA speed=12Mbit/s
*-usb:2 NON-RÉCLAMÉ
description: Périphérique USB générique
produit: VFS495 Fingerprint Reader
fabricant: Validity Sensors, Inc.
identifiant matériel: 5
information bus: usb@2:5
version: 1.04
numéro de série: 00209c0cd895
fonctionnalités: usb-1.10
configuration : maxpower=100mA speed=12Mbit/s
*-usb:3
description: Vidéo
produit: HP HD Webcam
fabricant: SunplusIT INC.
identifiant matériel: 7
information bus: usb@2:7
version: 1.08
fonctionnalités: usb-2.00
configuration : driver=uvcvideo maxpower=500mA speed=480Mbit/s
*-usbhost:1
produit: xHCI Host Controller
fabricant: Linux 5.8.0-36-generic xhci-hcd
identifiant matériel: 1
information bus: usb@3
nom logique: usb3
version: 5.08
fonctionnalités: usb-3.00
configuration : driver=hub slots=4 speed=5000Mbit/s
*-usb
description: Concentrateur USB
produit: USB5534B
fabricant: SMSC
identifiant matériel: 3
information bus: usb@3:3
version: 50.00
fonctionnalités: usb-3.00
configuration : driver=hub slots=3 speed=5000Mbit/s
*-communication:0
description: Communication controller
produit: 8 Series HECI #0
fabricant: Intel Corporation
identifiant matériel: 16
information bus: pci@0000:00:16.0
version: 04
bits: 64 bits
horloge: 33MHz
--
*-usb:1
description: USB controller
produit: 8 Series USB EHCI #1
fabricant: Intel Corporation
identifiant matériel: 1d
information bus: pci@0000:00:1d.0
version: 04
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration : driver=ehci-pci latency=0
ressources : irq:17 mémoire:d073d000-d073d3ff
*-usbhost
produit: EHCI Host Controller
fabricant: Linux 5.8.0-36-generic ehci_hcd
identifiant matériel: 1
information bus: usb@1
nom logique: usb1
version: 5.08
fonctionnalités: usb-2.00
configuration : driver=hub slots=3 speed=480Mbit/s
*-usb
description: Concentrateur USB
fabricant: Intel Corp.
identifiant matériel: 1
information bus: usb@1:1
version: 0.04
fonctionnalités: usb-2.00
configuration : driver=hub slots=8 speed=480Mbit/s
*-isa
description: ISA bridge
produit: 8 Series LPC Controller
fabricant: Intel Corporation
identifiant matériel: 1f
information bus: pci@0000:00:1f.0
version: 04
bits: 32 bits
horloge: 33MHz
lisa@lisaHost:~$
lisa@lisaHost:~$ cat /usr/lib/udev/rules.d/50-udev-default.rules
# do not edit this file, it will be overwritten on update
# run a command on remove events
ACTION=="remove", ENV{REMOVE_CMD}!="", RUN+="$env{REMOVE_CMD}"
ACTION=="remove", GOTO="default_end"
SUBSYSTEM=="virtio-ports", KERNEL=="vport*", ATTR{name}=="?*", SYMLINK+="virtio-ports/$attr{name}"
# select "system RTC" or just use the first one
SUBSYSTEM=="rtc", ATTR{hctosys}=="1", SYMLINK+="rtc"
SUBSYSTEM=="rtc", KERNEL=="rtc0", SYMLINK+="rtc", OPTIONS+="link_priority=-100"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", IMPORT{builtin}="usb_id", IMPORT{builtin}="hwdb --subsystem=usb"
ENV{MODALIAS}!="", IMPORT{builtin}="hwdb --subsystem=$env{SUBSYSTEM}"
ACTION!="add", GOTO="default_end"
SUBSYSTEM=="tty", KERNEL=="ptmx", GROUP="tty", MODE="0666"
SUBSYSTEM=="tty", KERNEL=="tty", GROUP="tty", MODE="0666"
SUBSYSTEM=="tty", KERNEL=="tty[0-9]*", GROUP="tty", MODE="0620"
SUBSYSTEM=="tty", KERNEL=="sclp_line[0-9]*", GROUP="tty", MODE="0620"
SUBSYSTEM=="tty", KERNEL=="ttysclp[0-9]*", GROUP="tty", MODE="0620"
SUBSYSTEM=="tty", KERNEL=="3270/tty[0-9]*", GROUP="tty", MODE="0620"
SUBSYSTEM=="vc", KERNEL=="vcs*|vcsa*", GROUP="tty"
KERNEL=="tty[A-Z]*[0-9]|ttymxc[0-9]*|pppox[0-9]*|ircomm[0-9]*|noz[0-9]*|rfcomm[0-9]*", GROUP="dialout"
SUBSYSTEM=="mem", KERNEL=="mem|kmem|port", GROUP="kmem", MODE="0640"
SUBSYSTEM=="input", GROUP="input"
SUBSYSTEM=="input", KERNEL=="js[0-9]*", MODE="0664"
SUBSYSTEM=="video4linux", GROUP="video"
SUBSYSTEM=="graphics", GROUP="video"
SUBSYSTEM=="drm", KERNEL!="renderD*", GROUP="video"
SUBSYSTEM=="dvb", GROUP="video"
SUBSYSTEM=="media", GROUP="video"
SUBSYSTEM=="cec", GROUP="video"
SUBSYSTEM=="drm", KERNEL=="renderD*", GROUP="render", MODE="0660"
SUBSYSTEM=="kfd", GROUP="render", MODE="0660"
# When using static_node= with non-default permissions, also update
# tmpfiles.d/static-nodes-permissions.conf.in to keep permissions synchronized.
SUBSYSTEM=="sound", GROUP="audio", \
OPTIONS+="static_node=snd/seq", OPTIONS+="static_node=snd/timer"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", MODE="0664"
SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x00010*", GROUP="video"
SUBSYSTEM=="firewire", ATTR{units}=="*0x00b09d:0x00010*", GROUP="video"
SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x010001*", GROUP="video"
SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x014001*", GROUP="video"
KERNEL=="parport[0-9]*", GROUP="lp"
SUBSYSTEM=="printer", KERNEL=="lp*", GROUP="lp"
SUBSYSTEM=="ppdev", GROUP="lp"
KERNEL=="lp[0-9]*", GROUP="lp"
KERNEL=="irlpt[0-9]*", GROUP="lp"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", GROUP="lp"
SUBSYSTEM=="block", GROUP="disk"
SUBSYSTEM=="block", KERNEL=="sr[0-9]*", GROUP="cdrom"
SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="4|5", GROUP="cdrom"
KERNEL=="sch[0-9]*", GROUP="cdrom"
KERNEL=="pktcdvd[0-9]*", GROUP="cdrom"
KERNEL=="pktcdvd", GROUP="cdrom"
SUBSYSTEM=="scsi_generic|scsi_tape", SUBSYSTEMS=="scsi", ATTRS{type}=="1|8", GROUP="tape"
SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="0", GROUP="disk"
KERNEL=="qft[0-9]*|nqft[0-9]*|zqft[0-9]*|nzqft[0-9]*|rawqft[0-9]*|nrawqft[0-9]*", GROUP="disk"
KERNEL=="loop-control", GROUP="disk", OPTIONS+="static_node=loop-control"
KERNEL=="btrfs-control", GROUP="disk"
KERNEL=="rawctl", GROUP="disk"
SUBSYSTEM=="raw", KERNEL=="raw[0-9]*", GROUP="disk"
SUBSYSTEM=="aoe", GROUP="disk", MODE="0220"
SUBSYSTEM=="aoe", KERNEL=="err", MODE="0440"
KERNEL=="rfkill", MODE="0664"
KERNEL=="tun", MODE="0666", OPTIONS+="static_node=net/tun"
KERNEL=="fuse", MODE="0666", OPTIONS+="static_node=fuse"
# The static_node is required on s390x and ppc (they are using MODULE_ALIAS)
KERNEL=="kvm", GROUP="kvm", MODE="0660", OPTIONS+="static_node=kvm"
KERNEL=="udmabuf", GROUP="kvm"
SUBSYSTEM=="ptp", ATTR{clock_name}=="KVM virtual PTP", SYMLINK += "ptp_kvm"
LABEL="default_end"
lisa@lisaHost:~$
lisa@lisaHost:~$ cat /usr/lib/udev/rules.d/60-drm.rules
# do not edit this file, it will be overwritten on update
ACTION!="remove", SUBSYSTEM=="drm", SUBSYSTEMS=="pci|usb|platform", IMPORT{builtin}="path_id"
# by-path
ENV{ID_PATH}=="?*", KERNEL=="card*", SYMLINK+="dri/by-path/$env{ID_PATH}-card"
ENV{ID_PATH}=="?*", KERNEL=="controlD*", SYMLINK+="dri/by-path/$env{ID_PATH}-control"
ENV{ID_PATH}=="?*", KERNEL=="renderD*", SYMLINK+="dri/by-path/$env{ID_PATH}-render"
lisa@lisaHost:~$
