hazeben@Sauron:~$ sudo iwlist scan
[sudo] password for hazeben:
enp14s0 Interface doesn't support scanning.
usb0 Interface doesn't support scanning.
lo Interface doesn't support scanning.
[ 0.219840] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.219842] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.219844] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.219845] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.219847] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.219848] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.219849] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.219851] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.219852] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.219854] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.219855] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.219856] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.219858] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.219859] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.219861] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.219862] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.219863] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[ 0.219865] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.219878] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.220000] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.220052] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.220174] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.220189] pci 0000:00:02.0: reg 0x10: [mem 0xd1000000-0xd13fffff 64bit]
[ 0.220197] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.220203] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.220219] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.220387] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.220415] pci 0000:00:14.0: reg 0x10: [mem 0xd1800000-0xd180ffff 64bit]
[ 0.220498] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.220620] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.220649] pci 0000:00:16.0: reg 0x10: [mem 0xd1814000-0xd181400f 64bit]
[ 0.220734] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.220842] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.220866] pci 0000:00:1a.0: reg 0x10: [mem 0xd1819000-0xd18193ff]
[ 0.220961] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.221083] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.221109] pci 0000:00:1b.0: reg 0x10: [mem 0xd1810000-0xd1813fff 64bit]
[ 0.221202] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.221318] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.221431] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.221554] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.221665] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.221786] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.221897] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.222028] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.222053] pci 0000:00:1d.0: reg 0x10: [mem 0xd1818000-0xd18183ff]
[ 0.222148] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.222264] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.222484] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.222506] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.222514] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.222523] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.222532] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.222541] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.222550] pci 0000:00:1f.2: reg 0x24: [mem 0xd1817000-0xd18177ff]
[ 0.222599] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.222708] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.222731] pci 0000:00:1f.3: reg 0x10: [mem 0xd1815000-0xd18150ff 64bit]
[ 0.222753] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
[ 0.222936] pci 0000:01:00.0: [10de:1291] type 00 class 0x030200
[ 0.222958] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd0ffffff]
[ 0.222972] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.222986] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[ 0.222995] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.223005] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.223024] pci 0000:01:00.0: Enabling HDA controller
[ 0.223088] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x8 link at 0000:00:01.0 (capable of 63.008 Gb/s with 8 GT/s x8 link)
[ 0.223222] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.223224] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.223227] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff]
[ 0.223231] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.223342] pci 0000:07:00.0: [14e4:4365] type 00 class 0x028000
[ 0.223393] pci 0000:07:00.0: reg 0x10: [mem 0xd1700000-0xd1707fff 64bit]
[ 0.223477] pci 0000:07:00.0: enabling Extended Tags
[ 0.223596] pci 0000:07:00.0: supports D1 D2
[ 0.223597] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.223771] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.223779] pci 0000:00:1c.0: bridge window [mem 0xd1700000-0xd17fffff]
[ 0.223922] pci 0000:08:00.0: [10ec:5209] type 00 class 0xff0000
[ 0.224038] pci 0000:08:00.0: reg 0x10: [mem 0xd1600000-0xd1600fff]
[ 0.224589] pci 0000:08:00.0: supports D1 D2
[ 0.224590] pci 0000:08:00.0: PME# supported from D1 D2 D3hot
[ 0.224932] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.224939] pci 0000:00:1c.1: bridge window [mem 0xd1600000-0xd16fffff]
[ 0.225030] pci 0000:0e:00.0: [10ec:8168] type 00 class 0x020000
[ 0.225069] pci 0000:0e:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.225105] pci 0000:0e:00.0: reg 0x18: [mem 0xd1500000-0xd1500fff 64bit]
[ 0.225128] pci 0000:0e:00.0: reg 0x20: [mem 0xd1400000-0xd1403fff 64bit pref]
[ 0.225266] pci 0000:0e:00.0: supports D1 D2
[ 0.225267] pci 0000:0e:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.225432] pci 0000:00:1c.2: PCI bridge to [bus 0e]
[ 0.225436] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.225441] pci 0000:00:1c.2: bridge window [mem 0xd1500000-0xd15fffff]
[ 0.225447] pci 0000:00:1c.2: bridge window [mem 0xd1400000-0xd14fffff 64bit pref]
[ 0.226318] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.226431] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.226543] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.226652] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.226759] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.226866] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.226972] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.227079] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.227351] ACPI: EC: interrupt unblocked
[ 0.227351] ACPI: EC: event unblocked
[ 0.227358] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.227358] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[ 0.227358] iommu: Default domain type: Translated
[ 0.227358] SCSI subsystem initialized
[ 0.227358] libata version 3.00 loaded.
[ 0.227358] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.227358] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.227358] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.227358] vgaarb: loaded
[ 0.227358] ACPI: bus type USB registered
[ 0.227358] usbcore: registered new interface driver usbfs
[ 0.227358] usbcore: registered new interface driver hub
[ 0.227358] usbcore: registered new device driver usb
[ 0.227358] pps_core: LinuxPPS API ver. 1 registered
[ 0.227358] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.227358] PTP clock support registered
[ 0.227358] EDAC MC: Ver: 3.0.0
[ 0.228473] Registered efivars operations
[ 0.228500] PCI: Using ACPI for IRQ routing
[ 0.230193] PCI: pci_cache_line_size set to 64 bytes
[ 0.230287] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.230289] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.230290] e820: reserve RAM buffer [mem 0x93b7f018-0x93ffffff]
[ 0.230291] e820: reserve RAM buffer [mem 0x93b8d018-0x93ffffff]
[ 0.230293] e820: reserve RAM buffer [mem 0x93b9e018-0x93ffffff]
[ 0.230294] e820: reserve RAM buffer [mem 0x94d37000-0x97ffffff]
[ 0.230295] e820: reserve RAM buffer [mem 0x98798000-0x9bffffff]
[ 0.230297] e820: reserve RAM buffer [mem 0x9a7bf000-0x9bffffff]
[ 0.230298] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[ 0.230299] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
[ 0.230441] NetLabel: Initializing
[ 0.230442] NetLabel: domain hash size = 128
[ 0.230443] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.230462] NetLabel: unlabeled traffic allowed by default
[ 0.230483] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.230483] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.233494] clocksource: Switched to clocksource tsc-early
[ 0.250101] *** VALIDATE bpf ***
[ 0.250227] VFS: Disk quotas dquot_6.6.0
[ 0.250252] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.250290] *** VALIDATE ramfs ***
[ 0.250295] *** VALIDATE hugetlbfs ***
[ 0.250401] AppArmor: AppArmor Filesystem Enabled
[ 0.250439] pnp: PnP ACPI init
[ 0.250666] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.250668] system 00:00: [io 0x1000-0x100f] has been reserved
[ 0.250671] system 00:00: [io 0xffff] has been reserved
[ 0.250673] system 00:00: [io 0xffff] has been reserved
[ 0.250674] system 00:00: [io 0x0400-0x0453] has been reserved
[ 0.250676] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.250678] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.250679] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.250687] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.250722] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.250808] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.250813] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.250871] pnp 00:03: Plug and Play ACPI device, IDs SNYa009 PNP030b (active)
[ 0.250909] pnp 00:04: Plug and Play ACPI device, IDs SYN2706 SYN2700 SYN0002 PNP0f13 (active)
[ 0.251184] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.251186] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.251188] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.251190] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.251194] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.251196] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.251198] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.251200] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.251202] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.251204] system 00:05: [mem 0x9fa00000-0x9fa00fff] has been reserved
[ 0.251209] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.251767] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[ 0.251769] system 00:06: [mem 0x40004000-0x40004fff] has been reserved
[ 0.251774] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.251789] pnp: PnP ACPI: found 7 devices
[ 0.253566] thermal_sys: Registered thermal governor 'fair_share'
[ 0.253567] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.253568] thermal_sys: Registered thermal governor 'step_wise'
[ 0.253569] thermal_sys: Registered thermal governor 'user_space'
[ 0.253570] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.258072] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.258116] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.258131] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
[ 0.258134] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.258137] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.258140] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff]
[ 0.258143] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.258147] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.258153] pci 0000:00:1c.0: bridge window [mem 0xd1700000-0xd17fffff]
[ 0.258164] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.258169] pci 0000:00:1c.1: bridge window [mem 0xd1600000-0xd16fffff]
[ 0.258180] pci 0000:00:1c.2: PCI bridge to [bus 0e]
[ 0.258183] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.258189] pci 0000:00:1c.2: bridge window [mem 0xd1500000-0xd15fffff]
[ 0.258194] pci 0000:00:1c.2: bridge window [mem 0xd1400000-0xd14fffff 64bit pref]
[ 0.258201] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.258203] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.258204] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.258206] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.258208] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.258209] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.258211] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.258212] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.258214] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.258215] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.258217] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.258218] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.258220] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.258221] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.258223] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.258224] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.258226] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff window]
[ 0.258227] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.258229] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd0ffffff]
[ 0.258230] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.258232] pci_bus 0000:07: resource 1 [mem 0xd1700000-0xd17fffff]
[ 0.258234] pci_bus 0000:08: resource 1 [mem 0xd1600000-0xd16fffff]
[ 0.258235] pci_bus 0000:0e: resource 0 [io 0x2000-0x2fff]
[ 0.258236] pci_bus 0000:0e: resource 1 [mem 0xd1500000-0xd15fffff]
[ 0.258238] pci_bus 0000:0e: resource 2 [mem 0xd1400000-0xd14fffff 64bit pref]
[ 0.258375] NET: Registered protocol family 2
[ 0.258667] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.258727] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.258932] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.259062] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.259120] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.259153] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.259229] NET: Registered protocol family 1
[ 0.259236] NET: Registered protocol family 44
[ 0.259252] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.280621] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x662 took 19375 usecs
[ 0.300614] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 19501 usecs
[ 0.300669] PCI: CLS 64 bytes, default 64
[ 0.300722] Trying to unpack rootfs image as initramfs...
[ 0.586018] Initramfs unpacking failed: Decoding failed
[ 0.597183] Freeing initrd memory: 83960K
[ 0.624513] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.624515] software IO TLB: mapped [mem 0x8f1c0000-0x931c0000] (64MB)
[ 0.624767] check: Scanning for low memory corruption every 60 seconds
[ 0.625325] Initialise system trusted keyrings
[ 0.625338] Key type blacklist registered
[ 0.625369] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.627128] zbud: loaded
[ 0.627628] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.627841] fuse: init (API version 7.31)
[ 0.627865] *** VALIDATE fuse ***
[ 0.627867] *** VALIDATE fuse ***
[ 0.627992] Platform Keyring initialized
[ 0.633894] Key type asymmetric registered
[ 0.633895] Asymmetric key parser 'x509' registered
[ 0.633904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.633953] io scheduler mq-deadline registered
[ 0.634996] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.635063] efifb: probing for efifb
[ 0.635095] efifb: showing boot graphics
[ 0.636582] efifb: framebuffer at 0xc0000000, using 8100k, total 8100k
[ 0.636583] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.636584] efifb: scrolling: redraw
[ 0.636586] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.636641] fbcon: Deferring console take-over
[ 0.636642] fb0: EFI VGA frame buffer device
[ 0.636652] intel_idle: MWAIT substates: 0x21120
[ 0.636654] intel_idle: v0.4.1 model 0x3A
[ 0.636890] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.637709] ACPI: AC Adapter [ACAD] (on-line)
[ 0.637786] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.637810] ACPI: Power Button [PWRB]
[ 0.637854] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.637875] ACPI: Lid Switch [LID0]
[ 0.637912] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.637957] ACPI: Power Button [PWRF]
[ 0.642153] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.642155] ACPI: Thermal Zone [THRM] (33 C)
[ 0.642346] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.645369] Linux agpgart interface v0.103
[ 0.648019] loop: module loaded
[ 0.648286] libphy: Fixed MDIO Bus: probed
[ 0.648287] tun: Universal TUN/TAP device driver, 1.6
[ 0.648328] PPP generic driver version 2.4.2
[ 0.648390] VFIO - User Level meta-driver version: 0.3
[ 0.648496] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.648500] ehci-pci: EHCI PCI platform driver
[ 0.648697] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.648704] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.648719] ehci-pci 0000:00:1a.0: debug port 2
[ 0.652643] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.652666] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd1819000
[ 0.668477] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.668529] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.668531] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.668533] usb usb1: Product: EHCI Host Controller
[ 0.668534] usb usb1: Manufacturer: Linux 5.4.0-64-generic ehci_hcd
[ 0.668536] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.668698] hub 1-0:1.0: USB hub found
[ 0.668706] hub 1-0:1.0: 2 ports detected
[ 0.669063] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.669068] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.669082] ehci-pci 0000:00:1d.0: debug port 2
[ 0.672999] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.673014] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd1818000
[ 0.688477] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.688533] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.688535] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.688537] usb usb2: Product: EHCI Host Controller
[ 0.688538] usb usb2: Manufacturer: Linux 5.4.0-64-generic ehci_hcd
[ 0.688539] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.688809] hub 2-0:1.0: USB hub found
[ 0.688818] hub 2-0:1.0: 2 ports detected
[ 0.689035] ehci-platform: EHCI generic platform driver
[ 0.689048] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.689053] ohci-pci: OHCI PCI platform driver
[ 0.689066] ohci-platform: OHCI generic platform driver
[ 0.689074] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.689259] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.689265] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.690330] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[ 0.690336] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.690501] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.690502] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.690504] usb usb3: Product: xHCI Host Controller
[ 0.690505] usb usb3: Manufacturer: Linux 5.4.0-64-generic xhci-hcd
[ 0.690507] usb usb3: SerialNumber: 0000:00:14.0
[ 0.690776] hub 3-0:1.0: USB hub found
[ 0.690790] hub 3-0:1.0: 4 ports detected
[ 0.691387] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.691393] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.691396] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.691440] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.691442] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.691443] usb usb4: Product: xHCI Host Controller
[ 0.691445] usb usb4: Manufacturer: Linux 5.4.0-64-generic xhci-hcd
[ 0.691446] usb usb4: SerialNumber: 0000:00:14.0
[ 0.691623] hub 4-0:1.0: USB hub found
[ 0.691634] hub 4-0:1.0: 4 ports detected
[ 0.692243] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.694722] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.694727] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.694929] mousedev: PS/2 mouse device common for all mice
[ 0.695284] rtc_cmos 00:01: RTC can wake from S4
[ 0.695516] rtc_cmos 00:01: registered as rtc0
[ 0.695535] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.695543] i2c /dev entries driver
[ 0.695595] device-mapper: uevent: version 1.0.3
[ 0.695711] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 0.695733] platform eisa.0: Probing EISA bus 0
[ 0.695735] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.695737] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.695738] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.695740] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.695741] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.695742] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.695744] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.695745] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.695746] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.695748] platform eisa.0: EISA: Detected 0 cards
[ 0.695756] intel_pstate: Intel P-state driver initializing
[ 0.695996] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.695998] EFI Variables Facility v0.08 2004-May-17
[ 0.717331] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.818468] battery: ACPI: Battery Slot [BAT1] (battery present)
[ 1.008483] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.028482] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.164871] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.164874] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.165158] hub 1-1:1.0: USB hub found
[ 1.165208] hub 1-1:1.0: 6 ports detected
[ 1.172336] drop_monitor: Initializing network drop monitor service
[ 1.172517] NET: Registered protocol family 10
[ 1.179033] Segment Routing with IPv6
[ 1.179057] NET: Registered protocol family 17
[ 1.179094] Key type dns_resolver registered
[ 1.179326] RAS: Correctable Errors collector initialized.
[ 1.179360] microcode: sig=0x306a9, pf=0x10, revision=0x21
[ 1.179399] microcode: Microcode Update Driver: v2.2.
[ 1.179404] IPI shorthand broadcast: enabled
[ 1.179410] sched_clock: Marking stable (1179078775, 316429)->(1197304465, -17909261)
[ 1.179483] registered taskstats version 1
[ 1.179492] Loading compiled-in X.509 certificates
[ 1.180335] Loaded X.509 cert 'Build time autogenerated kernel key: 7f1af841edfbf04e4b72462ffb6202c30b2da0bb'
[ 1.180362] zswap: loaded using pool lzo/zbud
[ 1.180424] Key type ._fscrypt registered
[ 1.180425] Key type .fscrypt registered
[ 1.184837] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.184840] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.185122] hub 2-1:1.0: USB hub found
[ 1.185218] hub 2-1:1.0: 6 ports detected
[ 1.186532] Key type big_key registered
[ 1.189373] Key type encrypted registered
[ 1.189377] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.206425] integrity: Loading X.509 certificate: UEFI:db
[ 1.206477] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 1.206478] integrity: Loading X.509 certificate: UEFI:db
[ 1.206508] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 1.239514] integrity: Loading X.509 certificate: UEFI:MokListRT
[ 1.239551] integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
[ 1.239552] integrity: Loading X.509 certificate: UEFI:MokListRT
[ 1.240067] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[ 1.259038] ima: No TPM chip found, activating TPM-bypass!
[ 1.259044] ima: Allocated hash algorithm: sha1
[ 1.259053] ima: No architecture policies found
[ 1.259070] evm: Initialising EVM extended attributes:
[ 1.259071] evm: security.selinux
[ 1.259072] evm: security.SMACK64
[ 1.259073] evm: security.SMACK64EXEC
[ 1.259073] evm: security.SMACK64TRANSMUTE
[ 1.259074] evm: security.SMACK64MMAP
[ 1.259075] evm: security.apparmor
[ 1.259075] evm: security.ima
[ 1.259076] evm: security.capability
[ 1.259077] evm: HMAC attrs: 0x1
[ 1.259620] PM: Magic number: 5:173:524
[ 1.259756] rtc_cmos 00:01: setting system clock to 2021-01-25T08:31:40 UTC (1611563500)
[ 1.261008] Freeing unused decrypted memory: 2040K
[ 1.261438] Freeing unused kernel image memory: 2724K
[ 1.280546] Write protecting the kernel read-only data: 22528k
[ 1.281045] Freeing unused kernel image memory: 2008K
[ 1.281256] Freeing unused kernel image memory: 1184K
[ 1.291667] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.291668] x86/mm: Checking user space page tables
[ 1.302278] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.302280] Run /init as init process
[ 1.407775] r8169 0000:0e:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.419492] libphy: r8169: probed
[ 1.419760] r8169 0000:0e:00.0 eth0: RTL8168g/8111g, 30:f9:ed:a0:55:40, XID 4c0, IRQ 32
[ 1.419763] r8169 0000:0e:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.441717] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[ 1.441796] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190816/utaddress-204)
[ 1.441802] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.441807] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20190816/utaddress-204)
[ 1.441812] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
[ 1.441817] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.441818] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20190816/utaddress-204)
[ 1.441825] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
[ 1.441830] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\_SB.PCI0.LPCB.NFCM.GPIO) (20190816/utaddress-204)
[ 1.441838] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.441840] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20190816/utaddress-204)
[ 1.441847] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
[ 1.441854] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\_SB.PCI0.LPCB.NFCM.GPIO) (20190816/utaddress-204)
[ 1.441858] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000051F (\_SB.PCI0.LPCB.SNC.GPIO) (20190816/utaddress-204)
[ 1.441863] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.441864] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.442167] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.442170] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[ 1.445813] ahci 0000:00:1f.2: version 3.0
[ 1.446053] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.448241] cryptd: max_cpu_qlen set to 1000
[ 1.453415] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.456204] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
[ 1.456207] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[ 1.458530] r8169 0000:0e:00.0 enp14s0: renamed from eth0
[ 1.465044] scsi host0: ahci
[ 1.465183] scsi host1: ahci
[ 1.465391] scsi host2: ahci
[ 1.465484] scsi host3: ahci
[ 1.465581] scsi host4: ahci
[ 1.465677] scsi host5: ahci
[ 1.465756] ata1: SATA max UDMA/133 abar m2048@0xd1817000 port 0xd1817100 irq 33
[ 1.465758] ata2: DUMMY
[ 1.465759] ata3: DUMMY
[ 1.465760] ata4: DUMMY
[ 1.465763] ata5: SATA max UDMA/133 abar m2048@0xd1817000 port 0xd1817300 irq 33
[ 1.465764] ata6: DUMMY
[ 1.485079] AVX version of gcm_enc/dec engaged.
[ 1.485081] AES CTR mode by8 optimization enabled
[ 1.526593] checking generic (c0000000 7e9000) vs hw (c0000000 10000000)
[ 1.526594] fb0: switching to inteldrmfb from EFI VGA
[ 1.526671] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.527306] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190816/nsarguments-59)
[ 1.527367] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190816/nsarguments-59)
[ 1.527721] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.527722] [drm] Driver supports precise vblank timestamp query.
[ 1.528050] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 1.528058] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[ 1.528079] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 1.528286] nouveau 0000:01:00.0: NVIDIA GK208 (108110a1)
[ 1.529008] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.554653] nouveau 0000:01:00.0: bios: version 80.28.22.00.25
[ 1.568855] usb 1-1.1: New USB device found, idVendor=03eb, idProduct=8813, bcdDevice=20.33
[ 1.568858] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.568860] usb 1-1.1: Product: Atmel maXTouch Digitizer
[ 1.568861] usb 1-1.1: Manufacturer: Atmel
[ 1.619339] nouveau 0000:01:00.0: fb: 2048 MiB DDR3
[ 1.619579] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[ 1.619701] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 1.619725] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 1.619865] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input6
[ 1.623443] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.623617] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[ 1.637436] tsc: Refined TSC clocksource calibration: 1795.920 MHz
[ 1.637456] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e31b7216c, max_idle_ns: 440795249889 ns
[ 1.637474] clocksource: Switched to clocksource tsc
[ 1.648501] usb 1-1.2: new full-speed USB device number 4 using ehci-pci
[ 1.687191] vga_switcheroo: enabled
[ 1.687308] [TTM] Zone kernel: Available graphics memory: 4013980 KiB
[ 1.687309] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 1.687310] [TTM] Initializing pool allocator
[ 1.687313] [TTM] Initializing DMA pool allocator
[ 1.687329] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[ 1.687330] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 1.687333] nouveau 0000:01:00.0: DRM: Pointer to TMDS table not found
[ 1.687334] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 1.687956] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 1.688227] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[ 1.746130] fbcon: i915drmfb (fb0) is primary device
[ 1.746131] fbcon: Deferring console take-over
[ 1.746147] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 1.768294] usb 1-1.2: New USB device found, idVendor=0489, idProduct=e062, bcdDevice= 1.12
[ 1.768296] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.768297] usb 1-1.2: Product: BCM43142A0
[ 1.768298] usb 1-1.2: Manufacturer: Broadcom Corp
[ 1.768299] usb 1-1.2: SerialNumber: 0C84DCF95110
[ 1.778850] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.828580] ata1.00: ATA-8: TOSHIBA MQ01ABD075H, AUF02H, max UDMA/100
[ 1.828583] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.830814] ata1.00: configured for UDMA/100
[ 1.830998] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4710]
[ 1.831527] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD0 2H PQ: 0 ANSI: 5
[ 1.831905] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.831964] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[ 1.831967] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.831980] sd 0:0:0:0: [sda] Write Protect is off
[ 1.831982] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.832004] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.852524] usb 1-1.3: new high-speed USB device number 5 using ehci-pci
[ 1.852888] sda: sda1 sda2
[ 1.853262] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.866406] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1144..]
[ 1.866412] psmouse serio1: synaptics: Your touchpad (PNP: SYN2706 SYN2700 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 1.929354] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800/0x0, board id: 2692, fw id: 1338502
[ 1.968375] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 1.994240] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b3aa, bcdDevice=55.07
[ 1.994242] usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.994244] usb 1-1.3: Product: Front Camera
[ 1.994245] usb 1-1.3: Manufacturer: Chicony Electronics Co.,Ltd.
[ 1.994246] usb 1-1.3: SerialNumber: 0001
[ 2.001362] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.008031] usbcore: registered new interface driver usbhid
[ 2.008032] usbhid: USB HID core driver
[ 2.010837] input: Atmel Atmel maXTouch Digitizer Touchscreen as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:03EB:8813.0001/input/input8
[ 2.011042] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:03EB:8813.0001/input/input9
[ 2.011297] hid-generic 0003:03EB:8813.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.1/input0
[ 2.011471] hid-generic 0003:03EB:8813.0002: hiddev1,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.1/input1
[ 2.148324] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.150253] ata5.00: ATAPI: MATSHITADVD-RAM UJ8D3, 1.00, max UDMA/133
[ 2.153697] ata5.00: configured for UDMA/133
[ 2.157566] scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8D3 1.00 PQ: 0 ANSI: 5
[ 2.214731] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.214733] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.228992] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.229101] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 3.648466] raid6: sse2x4 gen() 10925 MB/s
[ 3.696468] raid6: sse2x4 xor() 7500 MB/s
[ 3.744466] raid6: sse2x2 gen() 9253 MB/s
[ 3.792463] raid6: sse2x2 xor() 6277 MB/s
[ 3.840471] raid6: sse2x1 gen() 7780 MB/s
[ 3.888469] raid6: sse2x1 xor() 5553 MB/s
[ 3.888470] raid6: using algorithm sse2x4 gen() 10925 MB/s
[ 3.888471] raid6: .... xor() 7500 MB/s, rmw enabled
[ 3.888472] raid6: using ssse3x2 recovery algorithm
[ 3.891616] xor: automatically using best checksumming function avx
[ 3.911016] Btrfs loaded, crc32c=crc32c-intel
[ 4.125784] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.455027] systemd[1]: Inserted module 'autofs4'
[ 5.512713] systemd[1]: systemd 245.4-4ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 5.532703] systemd[1]: Detected architecture x86-64.
[ 5.570253] systemd[1]: Set hostname to <Sauron>.
[ 6.851024] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 6.938411] systemd[1]: Created slice system-modprobe.slice.
[ 6.938671] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 6.938905] systemd[1]: Created slice User and Session Slice.
[ 6.938975] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.939204] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.939250] systemd[1]: Reached target User and Group Name Lookups.
[ 6.939266] systemd[1]: Reached target Remote File Systems.
[ 6.939277] systemd[1]: Reached target Slices.
[ 6.939292] systemd[1]: Reached target Swap.
[ 6.939379] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 6.939494] systemd[1]: Listening on LVM2 poll daemon socket.
[ 6.939590] systemd[1]: Listening on Syslog Socket.
[ 6.939684] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 6.939738] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 6.939936] systemd[1]: Listening on Journal Audit Socket.
[ 6.940031] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.940135] systemd[1]: Listening on Journal Socket.
[ 6.940234] systemd[1]: Listening on udev Control Socket.
[ 6.940312] systemd[1]: Listening on udev Kernel Socket.
[ 6.941306] systemd[1]: Mounting Huge Pages File System...
[ 6.942256] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.943477] systemd[1]: Mounting Kernel Debug File System...
[ 6.944917] systemd[1]: Mounting Kernel Trace File System...
[ 6.946861] systemd[1]: Starting Journal Service...
[ 6.948385] systemd[1]: Starting Availability of block devices...
[ 6.950180] systemd[1]: Starting Set the console keyboard layout...
[ 6.951650] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 6.953000] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 6.953062] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 6.956204] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 6.956261] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 6.958899] systemd[1]: Starting Load Kernel Modules...
[ 6.960420] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 6.961878] systemd[1]: Starting udev Coldplug all Devices...
[ 6.963399] systemd[1]: Starting Uncomplicated firewall...
[ 6.966310] systemd[1]: Mounted Huge Pages File System.
[ 6.967287] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.968873] systemd[1]: Mounted Kernel Debug File System.
[ 6.969709] systemd[1]: Mounted Kernel Trace File System.
[ 6.971145] systemd[1]: Finished Availability of block devices.
[ 6.974010] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 6.983368] systemd[1]: Finished Uncomplicated firewall.
[ 7.032997] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 7.093767] systemd[1]: Finished Set the console keyboard layout.
[ 7.254991] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 7.257138] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 7.258026] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 7.258066] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 7.259029] systemd[1]: Starting Load/Save Random Seed...
[ 7.260432] systemd[1]: Starting Create System Users...
[ 7.392833] lp: driver loaded but no devices found
[ 7.397975] ppdev: user-space parallel port driver
[ 7.402792] systemd[1]: Finished Load Kernel Modules.
[ 7.404204] systemd[1]: Mounting FUSE Control File System...
[ 7.405290] systemd[1]: Mounting Kernel Configuration File System...
[ 7.406726] systemd[1]: Starting Apply Kernel Variables...
[ 7.412255] systemd[1]: Mounted FUSE Control File System.
[ 7.412558] systemd[1]: Mounted Kernel Configuration File System.
[ 7.582734] systemd[1]: Finished Load/Save Random Seed.
[ 7.605604] systemd[1]: Finished udev Coldplug all Devices.
[ 7.607616] systemd[1]: Finished Create System Users.
[ 7.610407] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 7.639621] systemd[1]: Finished Apply Kernel Variables.
[ 7.647634] systemd[1]: Started Journal Service.
[ 7.775095] systemd-journald[336]: Received client request to flush runtime journal.
[ 7.938466] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 8.553356] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/SNY5001:00/input/input10
[ 8.553462] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/SNY5001:00/input/input11
[ 8.707351] mei_me 0000:00:16.0: Could not read IF version
[ 8.774761] mc: Linux media interface: v0.10
[ 8.775295] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:03EB:8813.0001/input/input12
[ 8.775429] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:03EB:8813.0001/input/input13
[ 8.775591] hid-multitouch 0003:03EB:8813.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.1/input0
[ 8.833009] videodev: Linux video capture interface: v2.00
[ 8.844772] nouveau 0000:01:00.0: Enabling HDA controller
[ 8.866904] Bluetooth: Core ver 2.22
[ 8.866922] NET: Registered protocol family 31
[ 8.866923] Bluetooth: HCI device and connection manager initialized
[ 8.866927] Bluetooth: HCI socket layer initialized
[ 8.866929] Bluetooth: L2CAP socket layer initialized
[ 8.866934] Bluetooth: SCO socket layer initialized
[ 8.877409] sony_laptop: SNC setup done.
[ 8.916611] uvcvideo: Found UVC 1.00 device Front Camera (04f2:b3aa)
[ 8.921108] usbcore: registered new interface driver btusb
[ 8.926715] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 8.926717] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 8.926718] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 8.926719] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 8.958566] input: Front Camera: Front Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input14
[ 8.958733] usbcore: registered new interface driver uvcvideo
[ 8.958735] USB Video Class driver (1.1.1)
[ 8.987283] kvm: disabled by bios
[ 9.034929] Bluetooth: hci0: BCM: chip id 70
[ 9.035918] Bluetooth: hci0: BCM: features 0x06
[ 9.046772] kvm: disabled by bios
[ 9.051939] Bluetooth: hci0: BCM43142A
[ 9.055985] Bluetooth: hci0: BCM43142A0 (001.001.011) build 0000
[ 9.058245] bluetooth hci0: Direct firmware load for brcm/BCM43142A0-0489-e062.hcd failed with error -2
[ 9.058248] Bluetooth: hci0: BCM: Patch brcm/BCM43142A0-0489-e062.hcd not found
[ 9.124795] kvm: disabled by bios
[ 9.168912] kvm: disabled by bios
[ 9.343172] intel_rapl_common: Found RAPL domain package
[ 9.343174] intel_rapl_common: Found RAPL domain core
[ 9.343175] intel_rapl_common: Found RAPL domain uncore
[ 9.343181] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 9.354771] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 9.400363] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 9.400367] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.400369] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 9.400371] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 9.400372] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 9.400375] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 9.400376] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 9.483163] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 9.483245] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 9.483327] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 10.146812] audit: type=1400 audit(1611563509.381:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=582 comm="apparmor_parser"
[ 10.157520] audit: type=1400 audit(1611563509.393:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=586 comm="apparmor_parser"
[ 10.158019] audit: type=1400 audit(1611563509.393:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=584 comm="apparmor_parser"
[ 10.163411] audit: type=1400 audit(1611563509.397:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=585 comm="apparmor_parser"
[ 10.163418] audit: type=1400 audit(1611563509.397:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=585 comm="apparmor_parser"
[ 10.163420] audit: type=1400 audit(1611563509.397:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=585 comm="apparmor_parser"
[ 10.164554] audit: type=1400 audit(1611563509.401:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=583 comm="apparmor_parser"
[ 10.167844] audit: type=1400 audit(1611563509.401:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=587 comm="apparmor_parser"
[ 10.167849] audit: type=1400 audit(1611563509.401:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=587 comm="apparmor_parser"
[ 10.169164] audit: type=1400 audit(1611563509.405:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=588 comm="apparmor_parser"
[ 11.072490] Bluetooth: hci0: command 0x1003 tx timeout
[ 11.073904] Bluetooth: hci0: unexpected event for opcode 0x1003
[ 11.703981] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.703982] Bluetooth: BNEP filters: protocol multicast
[ 11.703987] Bluetooth: BNEP socket layer initialized
[ 12.032678] NET: Registered protocol family 38
[ 12.139996] Bluetooth: RFCOMM TTY layer initialized
[ 12.140003] Bluetooth: RFCOMM socket layer initialized
[ 12.140009] Bluetooth: RFCOMM ver 1.11
[ 12.615976] Generic FE-GE Realtek PHY r8169-e00:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-e00:00, irq=IGNORE)
[ 12.737323] r8169 0000:0e:00.0 enp14s0: Link is Down
[ 21.837171] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 384.802436] pci_bus 0000:07: Allocating resources
[ 384.802461] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000
[ 384.802473] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000
[ 384.802494] pci_bus 0000:08: Allocating resources
[ 384.802510] pcieport 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
[ 384.802518] pcieport 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000
[ 384.802538] pci_bus 0000:0e: Allocating resources
[ 384.802615] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0x9fb00000-0x9fcfffff 64bit pref]
[ 384.802658] pcieport 0000:00:1c.1: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 384.802671] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 384.802681] pcieport 0000:00:1c.1: BAR 13: assigned [io 0x6000-0x6fff]
[ 616.464977] pci_bus 0000:07: Allocating resources
[ 616.465004] pci_bus 0000:08: Allocating resources
[ 616.465026] pci_bus 0000:0e: Allocating resources
[ 2693.184702] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[ 2693.335099] usb 3-3: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= c.00
[ 2693.335106] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2693.335110] usb 3-3: Product: SAMSUNG_Android
[ 2693.335113] usb 3-3: Manufacturer: SAMSUNG
[ 2693.335116] usb 3-3: SerialNumber: RF8N310SK0A
[ 2697.852456] usb 3-3: USB disconnect, device number 2
[ 2698.548704] usb 3-3: new high-speed USB device number 3 using xhci_hcd
[ 2698.676791] usb 3-3: Device not responding to setup address.
[ 2698.884757] usb 3-3: Device not responding to setup address.
[ 2699.092691] usb 3-3: device not accepting address 3, error -71
[ 2699.428701] usb 3-3: new high-speed USB device number 4 using xhci_hcd
[ 2699.578264] usb 3-3: New USB device found, idVendor=04e8, idProduct=6863, bcdDevice= c.00
[ 2699.578271] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2699.578275] usb 3-3: Product: SAMSUNG_Android
[ 2699.578278] usb 3-3: Manufacturer: SAMSUNG
[ 2699.578281] usb 3-3: SerialNumber: RF8N310SK0A
[ 2699.611360] usbcore: registered new interface driver cdc_ether
[ 2699.615244] rndis_host 3-3:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-3, RNDIS device, 7a:68:51:90:cf:ea
[ 2699.615481] usbcore: registered new interface driver rndis_host
[ 2876.702012] usb 3-2: new low-speed USB device number 5 using xhci_hcd
[ 2876.855038] usb 3-2: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14
[ 2876.855046] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2876.855050] usb 3-2: Product: USB Optical Mouse
[ 2876.862369] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:1BCF:0005.0003/input/input18
[ 2876.922868] hid-generic 0003:1BCF:0005.0003: input,hidraw2: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-2/input0
[ 2940.426913] nouveau 0000:01:00.0: Enabling HDA controller
[ 2946.641507] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 3161.861592] usb 3-3: USB disconnect, device number 4
[ 3161.861855] rndis_host 3-3:1.0 usb0: unregister 'rndis_host' usb-0000:00:14.0-3, RNDIS device
[ 3161.862353] xhci_hcd 0000:00:14.0: WARN Cannot submit Set TR Deq Ptr
[ 3161.862357] xhci_hcd 0000:00:14.0: A Set TR Deq Ptr command is pending.
[ 3161.862365] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 3162.439610] usb 3-3: new high-speed USB device number 6 using xhci_hcd
[ 3162.589405] usb 3-3: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= c.00
[ 3162.589412] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3162.589416] usb 3-3: Product: SAMSUNG_Android
[ 3162.589419] usb 3-3: Manufacturer: SAMSUNG
[ 3162.589423] usb 3-3: SerialNumber: RF8N310SK0A
[ 3164.793398] usb 3-3: USB disconnect, device number 6
[ 6066.683429] usb 3-3: new high-speed USB device number 7 using xhci_hcd
[ 6066.833265] usb 3-3: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= c.00
[ 6066.833272] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6066.833276] usb 3-3: Product: SAMSUNG_Android
[ 6066.833279] usb 3-3: Manufacturer: SAMSUNG
[ 6066.833282] usb 3-3: SerialNumber: RF8N310SK0A
[ 6082.574882] usb 3-3: USB disconnect, device number 7
[ 6083.099291] usb 3-3: new high-speed USB device number 8 using xhci_hcd
[ 6083.248719] usb 3-3: New USB device found, idVendor=04e8, idProduct=6863, bcdDevice= c.00
[ 6083.248726] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6083.248730] usb 3-3: Product: SAMSUNG_Android
[ 6083.248734] usb 3-3: Manufacturer: SAMSUNG
[ 6083.248737] usb 3-3: SerialNumber: RF8N310SK0A
[ 6083.252316] rndis_host 3-3:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-3, RNDIS device, b6:8d:d8:c8:da:00
hazeben@Sauron:~$
j'ai pas pu tout avoir...effectivement c'est long...